mirror of https://gitee.com/openkylin/linux.git
983231 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Enke Chen
|
9d9b1ee0b2 |
tcp: fix TCP_USER_TIMEOUT with zero window
The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.
The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():
RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
as long as the receiver continues to respond probes. We support
this by default and reset icsk_probes_out with incoming ACKs.
This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.
In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.
Fixes:
|
|
|
Jakub Kicinski
|
b889c7c8c0 |
Merge branch 'ipv6-fixes-for-the-multicast-routes'
Matteo Croce says: ==================== ipv6: fixes for the multicast routes Fix two wrong flags in the IPv6 multicast routes created by the autoconf code. ==================== Link: https://lore.kernel.org/r/20210115184209.78611-1-mcroce@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Matteo Croce
|
ceed9038b2 |
ipv6: set multicast flag on the multicast route
The multicast route ff00::/8 is created with type RTN_UNICAST:
$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium
Set the type to RTN_MULTICAST which is more appropriate.
Fixes:
|
|
|
Matteo Croce
|
a826b04303 |
ipv6: create multicast route with RTPROT_KERNEL
The ff00::/8 multicast route is created without specifying the fc_protocol
field, so the default RTPROT_BOOT value is used:
$ ip -6 -d route
unicast ::1 dev lo proto kernel scope global metric 256 pref medium
unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium
unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium
As the documentation says, this value identifies routes installed during
boot, but the route is created when interface is set up.
Change the value to RTPROT_KERNEL which is a better value.
Fixes:
|
|
|
Jakub Kicinski
|
bde2c0af61 |
Various fixes:
* kernel-doc parsing fixes * incorrect debugfs string checks * locking fix in regulatory * some encryption-related fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAmAF80wACgkQB8qZga/f l8RClw//TFzAO2PoGZk7+xWkzRFM7YIZuinHRVeAxaehwVM+9cLnL9YrC90qNX+J GwxTsZa5JjewQMrKPoBu+5TNRAqMu0Nf4t1hT1TfPLQKLrOtYfKui2PVUkG3Iqii 6EtizjtmHS2UelLS+zMjpqG8NKD4hE6G0oxp/K8IEh5WygEvQhggi/6f5Ld9O0kx A1PAWrzDOAOMGZtY7IyhqDvwaTHJ2nMFkhsiZPXGbCUKT+xKFefmKRLsiqFXo3of ld3nQ3L1BgeLbqAxR7a3zDbRIfNVeZJvvwCtA7T3Gcuy0syqGfguKoGMSlkO6IAu aUlpSZaYSGcxGCWiWjTC1MIO2Sx6+Ug4dw+mDv2fEubA1d651yFqqFC9M95FOo5b 4jCyaw9bG/0ceHChw71tpAdDgqCGeu3jw92SuVpjIzRqdRrLvQ1kxw+FKaWF++wH QgAKF7l+WsYJvFkJQhf/eGlhFk6K4Ez4T3/053Exq3OfHcYgPWdTxQcAZJ36GGl1 kM01dki5j6YS0GMYo9RQIyag/yH72qv4fKK4hYtp7Mu/5W5J3lDV0fZzM5UOhc4+ x8UPVbqLEUaRXHIJRks0KoRBWwr/NLb/w60xqPQIM1hbmImBfqLYLkmvOhTMJ8Dn 1WsC2pevDSIjjto9lUCmB4/jHjhpkQ4c/m9bg4wE9Qd8Ha8aT/Q= =ea27 -----END PGP SIGNATURE----- Merge tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * kernel-doc parsing fixes * incorrect debugfs string checks * locking fix in regulatory * some encryption-related fixes * tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: check if atf has been disabled in __ieee80211_schedule_txq mac80211: do not drop tx nulldata packets on encrypted links mac80211: fix encryption key selection for 802.3 xmit mac80211: fix fast-rx encryption check mac80211: fix incorrect strlen of .write in debugfs cfg80211: fix a kerneldoc markup cfg80211: Save the regulatory domain with a lock cfg80211/mac80211: fix kernel-doc for SAR APIs ==================== Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
|
|
Rasmus Villemoes
|
87fe04367d |
net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnext
mv88e6xxx_port_vlan_join checks whether the VTU already contains an
entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely
changes the relevant .member[] element and loads the updated entry
into the VTU.
However, at least for the mv88e6250, the on-stack struct
mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly
initialized, neither in mv88e6xxx_port_vlan_join() nor inside the
getnext implementation. So the new entry has random garbage for the
STU bits, breaking VLAN filtering.
When the VTU entry is initially created, those bits are all zero, and
we should make sure to keep them that way when the entry is updated.
Fixes:
|
|
|
Jeannie Stevenson
|
173aac2fef |
platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
This commit enables dual fan control for the new Lenovo P53 and P73 laptop models. Signed-off-by: Jeannie Stevenson <jeanniestevenson@protonmail.com> Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> |
|
|
Hans de Goede
|
d35c9a029a |
platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
The recently added thermal policy support makes a
hp_wmi_perform_query(0x4c, ...) call on older devices which do not
support thermal policies this causes the following warning to be
logged (seen on a HP Stream x360 Convertible PC 11):
[ 26.805305] hp_wmi: query 0x4c returned error 0x3
Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences
the warning for unknown-command errors, silencing the new warning.
Cc: Elia Devito <eliadevito@gmail.com>
Fixes:
|
|
|
Vladimir Oltean
|
79267ae226 |
net: mscc: ocelot: allow offloading of bridge on top of LAG
The blamed commit was too aggressive, and it made ocelot_netdevice_event
react only to network interface events emitted for the ocelot switch
ports.
In fact, only the PRECHANGEUPPER should have had that check.
When we ignore all events that are not for us, we miss the fact that the
upper of the LAG changes, and the bonding interface gets enslaved to a
bridge. This is an operation we could offload under certain conditions.
Fixes:
|
|
|
Linus Torvalds
|
1e2a199f6c |
spi: Fixes for v5.11
A few more bug fixes for SPI, both driver specific ones. The caching in the Cadence driver is to avoid a deadlock trying to retrieve the cached value later at runtime. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAFyd4ACgkQJNaLcl1U h9DOnwf/SZWtc+EtLYPeHEBjMpvAW4n39BU24dkYQeEsy6rOEMDC3fNxV1PcCmTA jXtTaVXDYmzoYKy3u45QQaDY+vfmtdK1PAfU6LWaXW2tfSPIrB9RzZNQv0j7y4xZ xLOjrLIlfReDSgBBuFWHj139YX2LOheX5sSIUvVWgZLT8HPdicQ7CrW7Ju0cdNIm ZUbdg0mg72WUGnttnF87gL6Obbv8te+bv6+mpbKYuj+pYouSVNZgKPQ7+uGeH3rP RGcjtFwBs5CedgWe+Rv/5GSkMR68gNjjYWrKXN5GMc3ieXtaKxKkd5CfLafLWAEC m6YjNDKizP1bA1LU289/bDTs4mThNg== =V7f4 -----END PGP SIGNATURE----- Merge tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few more bug fixes for SPI, both driver specific ones. The caching in the Cadence driver is to avoid a deadlock trying to retrieve the cached value later at runtime" * tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence: cache reference clock rate during probe spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode |
|
|
Linus Torvalds
|
b4459f4413 |
ia64: fix build failure caused by memory model changes
-----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmAFOnMTHHJwcHRAbGlu dXguaWJtLmNvbQAKCRA5A4Ymyw79kW63B/0R7kxQcZ9foztE0MrtJIepficmX2O+ Gl94rh6G3PGKbZ+AcXmtgI0ADl9Ht72EvsS39qPS13JmZBhCFfGxHPwkpR4ssKPb m8NAVWGzo7WGH6Q3Wd+Qt4UNL0PIkJUxEZ6t3L1Tp9noEDxEHnLRBfgMfe6BswSj RRIc4Fb66tsGTUnV89VCFbkqbiladvw0Jordq5q4wj/kG+RcgkzoLaWbed278qOs 0Ztjofwa/sEin4MSzubyqzokW1HnbdLIi1jimRKNw7UuFr9HgLeqQoZal5IopRaD lPkEwaJp/L/bykCAHuITEbUYq/1KiaS15mHREzRNQm71xbte77TbOUVv =6ihg -----END PGP SIGNATURE----- Merge tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull ia64 build fix from Mike Rapoport: "Fix an ia64 build failure caused by memory model changes" * tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix build failure caused by memory model changes |
|
|
Linus Torvalds
|
fd3958eac3 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu: "A Kconfig dependency issue with omap-sham and a divide by zero in xor on some platforms" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: omap-sham - Fix link error without crypto-engine crypto: xor - Fix divide error in do_xor_speed() |
|
|
Takashi Iwai
|
c23010ffb2 |
ASoC: Fixes for v5.11
A few more fixes for v5.11, mostly around HDA jack detection, plus a couple of updates to the MAINTAINERS entries. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmAFySkACgkQJNaLcl1U h9B0Igf/dSyq+7vms1sxYUMxLEN0TYjk+JmAuGx8ZjoZKvCCMB7hGKuhRhlwfodE TmO5R0dxwkeNuDVADCh8PtGUebUfhxGpsbOAQazfrmeLKSeTka8YgEY/JM0p5GPy FxOIOCKxUyD9HGtpgmpRKxWqLPDrEuwmvxpY4BGWkoglOKaAgZLDBFWPoMQVNYfX XI52nGgVNHVrVnLRaRsU+qrwnBku+JHJJhZxwwklVup85FMExNKDeTAyEZ4Y9Rjx Cr/Oc/wi3rmf88U+y4ZBwKlbPjKJ5+Rt7V94a/OCtjg516GNztho8qh6luh+9zIZ Sn//tmS57+emudk6LEZISvZhm29Cjg== =cv6S -----END PGP SIGNATURE----- Merge tag 'asoc-fix-v5.11-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 A few more fixes for v5.11, mostly around HDA jack detection, plus a couple of updates to the MAINTAINERS entries. |
|
|
Hans de Goede
|
070222731b |
platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function:
Method (VGBS, 0, Serialized)
{
If ((^^PCI0.LPCB.EC0.ROLS == Zero))
{
VBDS = Zero
}
Else
{
VBDS = Zero
}
Return (VBDS) /* \_SB_.VGBI.VBDS */
}
Which is obviously wrong, because it always returns 0 independent of the
2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver
to initially report SW_TABLET_MODE = 1 to userspace, which is known to
cause problems when the 2-in-1 is actually in laptop mode.
During earlier testing this turned out to not be a problem because the
2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after
the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state.
Further testing however has shown that this Notify() soon after the
intel-vbtn driver loads, does not always happen. When the Notify
does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in
a non-working touchpad.
IOW the tablet-mode reporting is not reliable on this device, so it
should be dropped from the allow-list, fixing the touchpad sometimes
not working.
Fixes:
|
|
|
Andrey Konovalov
|
3ed86b9a71 |
kasan, arm64: fix pointer tags in KASAN reports
As of the "arm64: expose FAR_EL1 tag bits in siginfo" patch, the address that is passed to report_tag_fault has pointer tags in the format of 0x0X, while KASAN uses 0xFX format (note the difference in the top 4 bits). Fix up the pointer tag for kernel pointers in do_tag_check_fault by setting them to the same value as bit 55. Explicitly use __untagged_addr() instead of untagged_addr(), as the latter doesn't affect TTBR1 addresses. Fixes: |
|
|
Douglas Anderson
|
cf9d052aa6 |
pinctrl: qcom: Don't clear pending interrupts when enabling
In Linux, if a driver does disable_irq() and later does enable_irq() on its interrupt, I believe it's expecting these properties: * If an interrupt was pending when the driver disabled then it will still be pending after the driver re-enables. * If an edge-triggered interrupt comes in while an interrupt is disabled it should assert when the interrupt is re-enabled. If you think that the above sounds a lot like the disable_irq() and enable_irq() are supposed to be masking/unmasking the interrupt instead of disabling/enabling it then you've made an astute observation. Specifically when talking about interrupts, "mask" usually means to stop posting interrupts but keep tracking them and "disable" means to fully shut off interrupt detection. It's unfortunate that this is so confusing, but presumably this is all the way it is for historical reasons. Perhaps more confusing than the above is that, even though clients of IRQs themselves don't have a way to request mask/unmask vs. disable/enable calls, IRQ chips themselves can implement both. ...and yet more confusing is that if an IRQ chip implements disable/enable then they will be called when a client driver calls disable_irq() / enable_irq(). It does feel like some of the above could be cleared up. However, without any other core interrupt changes it should be clear that when an IRQ chip gets a request to "disable" an IRQ that it has to treat it like a mask of that IRQ. In any case, after that long interlude you can see that the "unmask and clear" can break things. Maulik tried to fix it so that we no longer did "unmask and clear" in commit |
|
|
Douglas Anderson
|
a95881d6aa |
pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking
In commit |
|
|
Douglas Anderson
|
4079d35fa4 |
pinctrl: qcom: No need to read-modify-write the interrupt status
When the Qualcomm pinctrl driver wants to Ack an interrupt, it does a read-modify-write on the interrupt status register. On some SoCs it makes sure that the status bit is 1 to "Ack" and on others it makes sure that the bit is 0 to "Ack". Presumably the first type of interrupt controller is a "write 1 to clear" type register and the second just let you directly set the interrupt status register. As far as I can tell from scanning structure definitions, the interrupt status bit is always in a register by itself. Thus with both types of interrupt controllers it is safe to "Ack" interrupts without doing a read-modify-write. We can do a simple write. It should be noted that if the interrupt status bit _was_ ever in a register with other things (like maybe status bits for other GPIOs): a) For "write 1 clear" type controllers then read-modify-write would be totally wrong because we'd accidentally end up clearing interrupts we weren't looking at. b) For "direct set" type controllers then read-modify-write would also be wrong because someone setting one of the other bits in the register might accidentally clear (or set) our interrupt. I say this simply to show that the current read-modify-write doesn't provide any sort of "future proofing" of the code. In fact (for "write 1 clear" controllers) the new code is slightly more "future proof" since it would allow more than one interrupt status bits to share a register. NOTE: this code fixes no bugs--it simply avoids an extra register read. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210114191601.v7.2.I3635de080604e1feda770591c5563bd6e63dd39d@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Douglas Anderson
|
a82e537807 |
pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
There's currently a comment in the code saying function 0 is GPIO. Instead of hardcoding it, let's add a member where an SoC can specify it. No known SoCs use a number other than 0, but this just makes the code clearer. NOTE: no SoC code needs to be updated since we can rely on zero-initialization. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Maulik Shah <mkshah@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210114191601.v7.1.I3ad184e3423d8e479bc3e86f5b393abb1704a1d1@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Josef Bacik
|
34d1eb0e59 |
btrfs: don't clear ret in btrfs_start_dirty_block_groups
If we fail to update a block group item in the loop we'll break, however we'll do btrfs_run_delayed_refs and lose our error value in ret, and thus not clean up properly. Fix this by only running the delayed refs if there was no failure. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
fb28610097 |
btrfs: fix lockdep splat in btrfs_recover_relocation
While testing the error paths of relocation I hit the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.10.0-rc6+ #217 Not tainted ------------------------------------------------------ mount/779 is trying to acquire lock: ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340 but task is already holding lock: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-root-00){++++}-{3:3}: down_read_nested+0x43/0x130 __btrfs_tree_read_lock+0x27/0x100 btrfs_read_lock_root_node+0x31/0x40 btrfs_search_slot+0x462/0x8f0 btrfs_update_root+0x55/0x2b0 btrfs_drop_snapshot+0x398/0x750 clean_dirty_subvols+0xdf/0x120 btrfs_recover_relocation+0x534/0x5a0 btrfs_start_pre_rw_mount+0xcb/0x170 open_ctree+0x151f/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #1 (sb_internal#2){.+.+}-{0:0}: start_transaction+0x444/0x700 insert_balance_item.isra.0+0x37/0x320 btrfs_balance+0x354/0xf40 btrfs_ioctl_balance+0x2cf/0x380 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}: __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 __mutex_lock+0x7e/0x7b0 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-root-00); lock(sb_internal#2); lock(btrfs-root-00); lock(&fs_info->balance_mutex); *** DEADLOCK *** 2 locks held by mount/779: #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380 #1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100 stack backtrace: CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ #217 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x8b/0xb0 check_noncircular+0xcf/0xf0 ? trace_call_bpf+0x139/0x260 __lock_acquire+0x1120/0x1e10 lock_acquire+0x116/0x370 ? btrfs_recover_balance+0x2f0/0x340 __mutex_lock+0x7e/0x7b0 ? btrfs_recover_balance+0x2f0/0x340 ? btrfs_recover_balance+0x2f0/0x340 ? rcu_read_lock_sched_held+0x3f/0x80 ? kmem_cache_alloc_trace+0x2c4/0x2f0 ? btrfs_get_64+0x5e/0x100 btrfs_recover_balance+0x2f0/0x340 open_ctree+0x1095/0x1726 btrfs_mount_root.cold+0x12/0xea ? rcu_read_lock_sched_held+0x3f/0x80 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? __kmalloc_track_caller+0x2f2/0x320 legacy_get_tree+0x30/0x50 vfs_get_tree+0x28/0xc0 ? capable+0x3a/0x60 path_mount+0x433/0xc10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This is straightforward to fix, simply release the path before we setup the balance_ctl. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> |
|
|
Josef Bacik
|
49ecc679ab |
btrfs: do not double free backref nodes on error
Zygo reported the following KASAN splat:
BUG: KASAN: use-after-free in btrfs_backref_cleanup_node+0x18a/0x420
Read of size 8 at addr ffff888112402950 by task btrfs/28836
CPU: 0 PID: 28836 Comm: btrfs Tainted: G W 5.10.0-e35f27394290-for-next+ #23
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0xbc/0xf9
? btrfs_backref_cleanup_node+0x18a/0x420
print_address_description.constprop.8+0x21/0x210
? record_print_text.cold.34+0x11/0x11
? btrfs_backref_cleanup_node+0x18a/0x420
? btrfs_backref_cleanup_node+0x18a/0x420
kasan_report.cold.10+0x20/0x37
? btrfs_backref_cleanup_node+0x18a/0x420
__asan_load8+0x69/0x90
btrfs_backref_cleanup_node+0x18a/0x420
btrfs_backref_release_cache+0x83/0x1b0
relocate_block_group+0x394/0x780
? merge_reloc_roots+0x4a0/0x4a0
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
? check_flags.part.50+0x6c/0x1e0
? btrfs_relocate_chunk+0x120/0x120
? kmem_cache_alloc_trace+0xa06/0xcb0
? _copy_from_user+0x83/0xc0
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
? __kasan_check_read+0x11/0x20
? check_chain_key+0x1f4/0x2f0
? __asan_loadN+0xf/0x20
? btrfs_ioctl_get_supported_features+0x30/0x30
? kvm_sched_clock_read+0x18/0x30
? check_chain_key+0x1f4/0x2f0
? lock_downgrade+0x3f0/0x3f0
? handle_mm_fault+0xad6/0x2150
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? check_flags.part.50+0x6c/0x1e0
? check_flags.part.50+0x6c/0x1e0
? check_flags+0x26/0x30
? lock_is_held_type+0xc3/0xf0
? syscall_enter_from_user_mode+0x1b/0x60
? do_syscall_64+0x13/0x80
? rcu_read_lock_sched_held+0xa1/0xd0
? __kasan_check_read+0x11/0x20
? __fget_light+0xae/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f4c4bdfe427
Allocated by task 28836:
kasan_save_stack+0x21/0x50
__kasan_kmalloc.constprop.18+0xbe/0xd0
kasan_kmalloc+0x9/0x10
kmem_cache_alloc_trace+0x410/0xcb0
btrfs_backref_alloc_node+0x46/0xf0
btrfs_backref_add_tree_node+0x60d/0x11d0
build_backref_tree+0xc5/0x700
relocate_tree_blocks+0x2be/0xb90
relocate_block_group+0x2eb/0x780
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 28836:
kasan_save_stack+0x21/0x50
kasan_set_track+0x20/0x30
kasan_set_free_info+0x1f/0x30
__kasan_slab_free+0xf3/0x140
kasan_slab_free+0xe/0x10
kfree+0xde/0x200
btrfs_backref_error_cleanup+0x452/0x530
build_backref_tree+0x1a5/0x700
relocate_tree_blocks+0x2be/0xb90
relocate_block_group+0x2eb/0x780
btrfs_relocate_block_group+0x26e/0x4c0
btrfs_relocate_chunk+0x52/0x120
btrfs_balance+0xe2e/0x1900
btrfs_ioctl_balance+0x3a7/0x460
btrfs_ioctl+0x24c8/0x4360
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This occurred because we freed our backref node in
btrfs_backref_error_cleanup(), but then tried to free it again in
btrfs_backref_release_cache(). This is because
btrfs_backref_release_cache() will cycle through all of the
cache->leaves nodes and free them up. However
btrfs_backref_error_cleanup() freed the backref node with
btrfs_backref_free_node(), which simply kfree()d the backref node
without unlinking it from the cache. Change this to a
btrfs_backref_drop_node(), which does the appropriate cleanup and
removes the node from the cache->leaves list, so when we go to free the
remaining cache we don't trip over items we've already dropped.
Fixes:
|
|
|
Josef Bacik
|
18d3bff411 |
btrfs: don't get an EINTR during drop_snapshot for reloc
This was partially fixed by |
|
|
lianzhi chang
|
5cdc4a6950 |
udf: fix the problem that the disc content is not displayed
When the capacity of the disc is too large (assuming the 4.7G specification), the disc (UDF file system) will be burned multiple times in the windows (Multisession Usage). When the remaining capacity of the CD is less than 300M (estimated value, for reference only), open the CD in the Linux system, the content of the CD is displayed as blank (the kernel will say "No VRS found"). Windows can display the contents of the CD normally. Through analysis, in the "fs/udf/super.c": udf_check_vsd function, the actual value of VSD_MAX_SECTOR_OFFSET may be much larger than 0x800000. According to the current code logic, it is found that the type of sbi->s_session is "__s32", when the remaining capacity of the disc is less than 300M (take a set of test values: sector=3154903040, sbi->s_session=1540464, sb->s_blocksize_bits=11 ), the calculation result of "sbi->s_session << sb->s_blocksize_bits" will overflow. Therefore, it is necessary to convert the type of s_session to "loff_t" (when udf_check_vsd starts, assign a value to _sector, which is also converted in this way), so that the result will not overflow, and then the content of the disc can be displayed normally. Link: https://lore.kernel.org/r/20210114075741.30448-1-changlianzhi@uniontech.com Signed-off-by: lianzhi chang <changlianzhi@uniontech.com> Signed-off-by: Jan Kara <jack@suse.cz> |
|
|
Chris Wilson
|
45db630e5f |
drm/i915: Check for rq->hwsp validity after acquiring RCU lock
Since we allow removing the timeline map at runtime, there is a risk that rq->hwsp points into a stale page. To control that risk, we hold the RCU read lock while reading *rq->hwsp, but we missed a couple of important barriers. First, the unpinning / removal of the timeline map must be after all RCU readers into that map are complete, i.e. after an rcu barrier (in this case courtesy of call_rcu()). Secondly, we must make sure that the rq->hwsp we are about to dereference under the RCU lock is valid. In this case, we make the rq->hwsp pointer safe during i915_request_retire() and so we know that rq->hwsp may become invalid only after the request has been signaled. Therefore is the request is not yet signaled when we acquire rq->hwsp under the RCU, we know that rq->hwsp will remain valid for the duration of the RCU read lock. This is a very small window that may lead to either considering the request not completed (causing a delay until the request is checked again, any wait for the request is not affected) or dereferencing an invalid pointer. Fixes: |
|
|
Tvrtko Ursulin
|
171a8e9982 |
drm/i915/pmu: Don't grab wakeref when enabling events
Chris found a CI report which points out calling intel_runtime_pm_get from inside i915_pmu_enable hook is not allowed since it can be invoked from hard irq context. This is something we knew but forgot, so lets fix it once again. We do this by syncing the internal book keeping with hardware rc6 counter on driver load. v2: * Always sync on parking and fully sync on init. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: |
|
|
Chris Wilson
|
488751a0ef |
drm/i915/gt: Prevent use of engine->wa_ctx after error
On error we unpin and free the wa_ctx.vma, but do not clear any of the derived flags. During lrc_init, we look at the flags and attempt to dereference the wa_ctx.vma if they are set. To protect the error path where we try to limp along without the wa_ctx, make sure we clear those flags! Reported-by: Matt Roper <matthew.d.roper@intel.com> Fixes: |
|
|
Nicolas Saenz Julienne
|
33c74535b0
|
drm/vc4: Unify PCM card's driver_name
User-space ALSA matches a card's driver name against an internal list of
aliases in order to select the correct configuration for the system.
When the driver name isn't defined, the match is performed against the
card's name.
With the introduction of RPi4 we now have two HDMI ports with two
distinct audio cards. This is reflected in their names, making them
different from previous RPi versions. With this, ALSA ultimately misses
the board's configuration on RPi4.
In order to avoid this, set "card->driver_name" to "vc4-hdmi"
unanimously.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Fixes:
|
|
|
Kent Gibson
|
1fc7c1ef37 |
tools: gpio: fix %llu warning in gpio-watch.c
Some platforms, such as mips64, don't map __u64 to long long unsigned
int so using %llu produces a warning:
gpio-watch.c: In function ‘main’:
gpio-watch.c:89:30: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
89 | printf("line %u: %s at %llu\n",
| ~~~^
| |
| long long unsigned int
| %lu
90 | chg.info.offset, event, chg.timestamp_ns);
| ~~~~~~~~~~~~~~~~
| |
| __u64 {aka long unsigned int}
Replace the %llu with PRIu64 and cast the argument to uint64_t.
Fixes:
|
|
|
Kent Gibson
|
2fe7c2f994 |
tools: gpio: fix %llu warning in gpio-event-mon.c
Some platforms, such as mips64, don't map __u64 to long long unsigned
int so using %llu produces a warning:
gpio-event-mon.c:110:37: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=]
110 | fprintf(stdout, "GPIO EVENT at %llu on line %d (%d|%d) ",
| ~~~^
| |
| long long unsigned int
| %lu
111 | event.timestamp_ns, event.offset, event.line_seqno,
| ~~~~~~~~~~~~~~~~~~
| |
| __u64 {aka long unsigned int}
Replace the %llu with PRIu64 and cast the argument to uint64_t.
Fixes:
|
|
|
Takashi Iwai
|
532a208ad6 |
ALSA: usb-audio: Avoid implicit feedback on Pioneer devices
For addressing the regression on Pioneer devices, we recently
corrected the quirk code to enable the implicit feedback mode on those
devices properly. However, the devices still showed problems with the
full duplex operations with JACK, and after debug sessions, we figured
out that the older kernels that had worked with JACK also didn't use
the implicit feedback mode at all although they had the quirk code to
enable it; instead, the old code worked just to skip the normal sync
endpoint setup that would have been detected without it. IOW, what
broke without the implicit-fb quirk in the past was the application of
the normal sync endpoint that is actually the capture data endpoint on
these devices.
This patch covers the overseen piece: it modifies the quirk code again
not to enable the implicit feedback mode but just to make the driver
skipping the sync endpoint detection. This made the driver working
with JACK full-duplex mode again.
Still it's not quite clear why the implicit feedback doesn't work on
those devices yet; maybe it's about some issues in the URB setup. But
at least, with this patch, the driver should work in the level of the
older kernels again.
Fixes:
|
|
|
Takashi Iwai
|
3784d449d7 |
ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1
The UAC2/3 sample rate setup is based on the clock node, which is
usually shared in the interface, and can't be re-setup without
deselecting the interface once, and that's how the current code
behaves. OTOH, the sample rate setup of UAC1 is per endpoint, hence
we basically need to call for each endpoint usage even if those share
the same interface.
This patch fixes the behavior of UAC1 to call always
snd_usb_init_sample_rate() in snd_usb_endpoint_configure().
Fixes:
|
|
|
Takashi Iwai
|
87cb9af9f8 |
ALSA: usb-audio: Fix UAC1 rate setup for secondary endpoints
The current sample rate setup function for UAC1 assumes only the first endpoint retrieved from the interface:altset pair, but the rate set up may be needed also for the secondary endpoint. Also, retrieving the endpoint number from the interface descriptor is redundant; we have already the target endpoint in the given audioformat object. This patch simplifies the code and corrects the target endpoint as described in the above. It simply refers to fmt->endpoint directly. Also, this patch drops the pioneer_djm_set_format_quirk() that is caleld from snd_usb_set_format_quirk(); this function does the sample rate setup but for the capture endpoint (0x82), and that's exactly what the change above fixes. Link: https://lore.kernel.org/r/20210118075816.25068-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> |
|
|
Christian König
|
bf9eee249a |
drm/ttm: stop using GFP_TRANSHUGE_LIGHT
The only flag we really need is __GFP_NOMEMALLOC, highmem depends on
dma32 and moveable/compound should never be set in the first place.
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/413812/
Link: https://patchwork.freedesktop.org/patch/413964/
Fixes:
|
|
|
Anshuman Gupta
|
8662e1119a |
drm/i915/hdcp: Get conn while content_type changed
Get DRM connector reference count while scheduling a prop work to avoid any possible destroy of DRM connector when it is in DRM_CONNECTOR_REGISTERED state. Fixes: |
|
|
Anshuman Gupta
|
b3c95d0bdb |
drm/i915/hdcp: Update CP property in update_pipe
When crtc state need_modeset is true it is not necessary it is going to be a real modeset, it can turns to be a fastset instead of modeset. This turns content protection property to be DESIRED and hdcp update_pipe left with property to be in DESIRED state but actual hdcp->value was ENABLED. This issue is caught with DP MST setup, where we have multiple connector in same DP_MST topology. When disabling HDCP on one of DP MST connector leads to set the crtc state need_modeset to true for all other crtc driving the other DP-MST topology connectors. This turns up other DP MST connectors CP property to be DESIRED despite the actual hdcp->value is ENABLED. Above scenario fails the DP MST HDCP IGT test, disabling HDCP on one MST stream should not cause to disable HDCP on another MST stream on same DP MST topology. v2: - Fixed connector->base.registration_state == DRM_CONNECTOR_REGISTERED WARN_ON. v3: - Commit log improvement. [Uma] - Added a comment before scheduling prop_work. [Uma] Fixes: |
|
|
Randy Dunlap
|
bd9dcef67f |
x86/xen: fix 'nopvspin' build error
Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled.
Fixes this build error:
../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’:
../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function)
nopvspin = true;
Fixes:
|
|
|
Linus Torvalds
|
19c329f680 | Linux 5.11-rc4 | |
|
Linus Torvalds
|
e2da783614 |
perf tools fixes for 5.11:
- Fix 'CPU too large' error in Intel PT.
- Correct event attribute sizes in 'perf inject'.
- Sync build_bug.h and kvm.h kernel copies.
- Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example.
- libbpf tests fixes.
- Fix shadow stat 'perf test' for non-bash shells.
- Take cgroups into account for shadow stats in 'perf stat'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
$ grep "model name" -m1 /proc/cpuinfo
model name: AMD Ryzen 9 3900X 12-Core Processor
# export PERF_TARBALL=http://192.168.86.5/perf/perf-5.11.0-rc3.tar.xz
# dm
1 66.93 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 68.65 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 73.00 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 79.04 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 79.71 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 82.51 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 103.45 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 113.86 alpine:3.11 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 109.31 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 113.90 alpine:edge : Ok gcc (Alpine 10.2.0) 10.2.0, Alpine clang version 10.0.1
11 66.76 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 83.71 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 10.0.0
13 80.70 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.3.1 20200518 (ALT Sisyphus 9.3.1-alt1), clang version 10.0.1
14 62.75 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 97.65 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-12), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 21.18 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 21.07 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 25.83 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
19 30.65 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44)
20 93.44 centos:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5), clang version 10.0.1 (Red Hat 10.0.1-1.module_el8.3.0+467+cb298d5b)
21 60.64 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 10.2.1 20201217 releases/gcc-10.2.0-643-g7cbb07d2fc, clang version 10.0.1
22 74.57 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
23 75.40 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
24 72.75 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8+deb10u2 (tags/RELEASE_701/final)
25 72.36 debian:experimental : Ok gcc (Debian 10.2.1-6) 10.2.1 20210110, Debian clang version 11.0.1-2
26 32.35 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 10.2.1-6) 10.2.1 20210110
27 28.65 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 10.2.1-3) 10.2.1 20201224
28 13.79 debian:experimental-x-mipsel : FAIL mipsel-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
CC /tmp/build/perf/util/map.o
util/map.c: In function 'map__new':
util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
109 | "%s/platforms/%s/arch-%s/usr/lib/%s",
| ^~
In file included from /usr/mipsel-linux-gnu/include/stdio.h:867,
from util/symbol.h:11,
from util/map.c:2:
/usr/mipsel-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
29 29.14 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
30 30.66 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
31 66.33 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
32 77.51 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
33 25.23 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
34 79.68 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
35 93.09 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
36 94.12 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
37 101.97 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
38 107.51 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
39 111.24 fedora:30 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
40 25.85 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
41 110.61 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-4.fc31)
42 93.78 fedora:32 : Ok gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 10.0.1 (Fedora 10.0.1-3.fc32)
43 91.51 fedora:33 : Ok gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9), clang version 11.0.0 (Fedora 11.0.0-2.fc33)
44 92.75 fedora:34 : Ok gcc (GCC) 11.0.0 20210113 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-4.fc34)
45 92.33 fedora:rawhide : Ok gcc (GCC) 11.0.0 20210109 (Red Hat 11.0.0-0), clang version 11.0.1 (Fedora 11.0.1-4.fc34)
46 33.58 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.3.0-r1 p3) 9.3.0
47 66.03 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
48 84.73 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
49 98.35 manjaro:latest : Ok gcc (GCC) 10.2.0, clang version 10.0.1
50 223.15 openmandriva:cooker : Ok gcc (GCC) 10.2.0 20200723 (OpenMandriva), OpenMandriva 11.0.0-1 clang version 11.0.0 (/builddir/build/BUILD/llvm-project-llvmorg-11.0.0/clang 63e22714ac938c6b537bd958f70680d3331a2030)
51 117.30 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190905 [gcc-7-branch revision 275407], clang version 5.0.1 (tags/RELEASE_501/final 312548)
52 124.82 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
53 113.33 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 9.0.1
54 106.17 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
55 108.15 opensuse:tumbleweed : Ok gcc (SUSE Linux) 10.2.1 20200825 [revision c0746a1beb1ba073c7981eb09f55b3d993b32e5c], clang version 10.0.1
56 25.57 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
57 30.86 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-44.0.3)
58 91.75 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.1), clang version 10.0.1 (Red Hat 10.0.1-1.0.1.module+el8.3.0+7827+89335dbf)
59 27.64 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
60 29.65 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
61 75.65 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
62 25.57 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
63 25.52 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
64 25.01 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 25.51 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 25.70 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 24.95 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 87.96 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
69 27.40 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
70 27.14 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
71 22.68 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
72 26.52 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
73 28.97 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 28.54 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
75 163.57 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
76 24.07 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 26.77 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 24.00 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
79 69.36 ubuntu:19.10 : Ok gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 8.0.1-3build1 (tags/RELEASE_801/final)
80 27.07 ubuntu:19.10-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
81 24.29 ubuntu:19.10-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 9.2.1-9ubuntu1) 9.2.1 20191008
82 74.99 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, clang version 10.0.0-4ubuntu1
83 30.49 ubuntu:20.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 10.2.0-5ubuntu1~20.04) 10.2.0
84 73.54 ubuntu:20.10 : Ok gcc (Ubuntu 10.2.0-13ubuntu1) 10.2.0, Ubuntu clang version 11.0.0-2
$
# uname -a
Linux quaco 5.10.7-100.fc32.x86_64 #1 SMP Tue Jan 12 20:25:28 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
|
|
|
Linus Torvalds
|
a1339d6355 |
powerpc fixes for 5.11 #4
One fix for a lack of alignment in our linker script, that can lead to crashes depending on configuration etc. One fix for the 32-bit VDSO after the C VDSO conversion. Thanks to: Andreas Schwab, Ariel Marcovitch, Christophe Leroy. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmAEDicTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgAMOEAC2jmfH0UwkbDWsKtolps7Gy4hzr1HH PzauZgWHA+eq+j6I7oDsACsVOsVnUGCBsEkOfFYTIlBroVgnTdXlRU3WSsisnTfW sjaQguv3nP01P82CicIVCJJJJFpJENuXcs4Dr02OYP9VMFytWiAr6RvxxCOqozVo dcCg7/04za+v5mR3KRdw2Jf5mlox5kN7wFCFMLlSzadAdUneP+Qt583shEx0KejH IXQOXTp191Q0luFh/2TLz+gzai/A2v16Bk/Q7h3VQ/EQ3V0jpEil6bQXX2UI6on8 dRngTQ4j7gZ5b7QcpqvO2t2otWthGO0YQ/rfI3p1XdpWZNQKFA2I3cXblSqFEhp1 /qI2K5zUiLbRSW4NrgxZ6zIt0PYuxYnrIt7Wwj7nV+79RP+9o9t1VcvUMAaSL5C+ DfQq8GJdsUUUifFzNzq9EeuL2T0RHFooK0xNd00hc43NJjmnhni3TY20UI4r7b8k PmeKJg94Pc4a6PmtGUsOgG53CGENVDTDPCSY7e9XSIAMT0jV0Cbo4+0uwk4s/J/b 1oEROtc8TTq6I47ARc6GZgQ9Wui4C/34uxIuhF7uTTGrWYlMgFcMOkRGUt8CuBrD DLhjA37uqgf+bK2g2heCOQXIjh9JCGc3V7BEB0d545xxv0vjpIPmk9mXwGyxth0N /lCUHrl64VtI/g== =jpfR -----END PGP SIGNATURE----- Merge tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a lack of alignment in our linker script, that can lead to crashes depending on configuration etc. One fix for the 32-bit VDSO after the C VDSO conversion. Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy" * tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Fix clock_gettime_fallback for vdso32 powerpc: Fix alignment bug within the init sections |
|
|
Linus Torvalds
|
a527a2b32d |
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs fixes from Al Viro: "Several assorted fixes. I still think that audit ->d_name race is better fixed this way for the benefit of backports, with any possibly fancier variants done on top of it" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dump_common_audit_data(): fix racy accesses to ->d_name iov_iter: fix the uaccess area in copy_compat_iovec_from_user umount(2): move the flag validity checks first |
|
|
Linus Torvalds
|
feb889fb40 |
mm: don't put pinned pages into the swap cache
So technically there is nothing wrong with adding a pinned page to the
swap cache, but the pinning obviously means that the page can't actually
be free'd right now anyway, so it's a bit pointless.
However, the real problem is not with it being a bit pointless: the real
issue is that after we've added it to the swap cache, we'll try to unmap
the page. That will succeed, because the code in mm/rmap.c doesn't know
or care about pinned pages.
Even the unmapping isn't fatal per se, since the page will stay around
in memory due to the pinning, and we do hold the connection to it using
the swap cache. But when we then touch it next and take a page fault,
the logic in do_swap_page() will map it back into the process as a
possibly read-only page, and we'll then break the page association on
the next COW fault.
Honestly, this issue could have been fixed in any of those other places:
(a) we could refuse to unmap a pinned page (which makes conceptual
sense), or (b) we could make sure to re-map a pinned page writably in
do_swap_page(), or (c) we could just make do_wp_page() not COW the
pinned page (which was what we historically did before that "mm:
do_wp_page() simplification" commit).
But while all of them are equally valid models for breaking this chain,
not putting pinned pages into the swap cache in the first place is the
simplest one by far.
It's also the safest one: the reason why do_wp_page() was changed in the
first place was that getting the "can I re-use this page" wrong is so
fraught with errors. If you do it wrong, you end up with an incorrectly
shared page.
As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or
do_swap_page() would be a serious bug since it is only a (very good)
heuristic. Re-using the page requires a hard black-and-white rule with
no room for ambiguity.
In contrast, saying "this page is very likely dma pinned, so let's not
add it to the swap cache and try to unmap it" is an obviously safe thing
to do, and if the heuristic might very rarely be a false positive, no
harm is done.
Fixes:
|
|
|
Dexuan Cui
|
fff7b5e6ee |
x86/hyperv: Initialize clockevents after LAPIC is initialized
With commit |
|
|
Mike Rapoport
|
32c2bc8f2d |
ia64: fix build failure caused by memory model changes
The change of ia64's default memory model to SPARSEMEM causes defconfig
build to fail:
CC kernel/async.o
In file included from include/linux/numa.h:25,
from include/linux/async.h:13,
from kernel/async.c:47:
arch/ia64/include/asm/sparsemem.h:14:40: warning: "PAGE_SHIFT" is not defined, evaluates to 0 [-Wundef]
14 | #if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
| ^~~~~~~~~~
In file included from include/linux/gfp.h:6,
from include/linux/xarray.h:14,
from include/linux/radix-tree.h:19,
from include/linux/idr.h:15,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/energy_model.h:7,
from include/linux/device.h:16,
from include/linux/async.h:14,
from kernel/async.c:47:
include/linux/mmzone.h:1156:2: error: #error Allocator MAX_ORDER exceeds SECTION_SIZE
1156 | #error Allocator MAX_ORDER exceeds SECTION_SIZE
| ^~~~~
The error cause is the missing definition of PAGE_SHIFT in the calculation
of SECTION_SIZE_BITS.
Add include of <asm/page.h> to arch/ia64/include/asm/sparsemem.h to solve
the problem.
Fixes:
|
|
|
Wolfram Sang
|
1b2cfa2d1d |
i2c: octeon: check correct size of maximum RECV_LEN packet
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the
SMBus 2.0 specs. No reason to add one to it.
Fixes:
|
|
|
Sowjanya Komatineni
|
2f3a0828d4 |
i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO
VI I2C controller has known hardware bug where immediate multiple writes to TX_FIFO register gets stuck. Recommended software work around is to read I2C register after each write to TX_FIFO register to flush out the data. This patch implements this work around for VI I2C controller. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Mikko Perttunen
|
bc1c2048ab |
i2c: bpmp-tegra: Ignore unknown I2C_M flags
In order to not to start returning errors when new I2C_M flags are added, change behavior to just ignore all flags that we don't know about. This includes the I2C_M_DMA_SAFE flag that already exists but causes -EINVAL to be returned for valid transactions. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
|
|
Alexander Lobakin
|
66c556025d |
skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too
Commit |
|
|
Linus Torvalds
|
0da0a8a0a0 |
SCSI fixes on 20210116
Nine minor fixes, 7 in drivers and 2 in the core SCSI disk driver (sd) which should be harmless involving removing an unused variable and quietening a spurious warning. Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> -----BEGIN PGP SIGNATURE----- iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYANKJiYcamFtZXMuYm90 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVSyAP9a4xdK 9A4seh2/LW3GwPsoQUJQINe4yok/lGVXSQk3XQD/QkkYbzeqVGN4BHK1LQX2R9Sw wy+E4ENjdOY+9p+KMxo= =m0jh -----END PGP SIGNATURE----- Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine minor fixes, seven in drivers and two in the core SCSI disk driver (sd) which should be harmless involving removing an unused variable and quietening a spurious warning" Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Remove obsolete variable in sd_remove() scsi: sd: Suppress spurious errors when WRITE SAME is being disabled scsi: scsi_debug: Fix memleak in scsi_debug_init() scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility" scsi: qedi: Correct max length of CHAP secret scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback scsi: ufs: Relocate flush of exceptional event scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL scsi: ufs: Fix possible power drain during system suspend |
|
|
Al Viro
|
d36a1dd9f7 |
dump_common_audit_data(): fix racy accesses to ->d_name
We are not guaranteed the locking environment that would prevent dentry getting renamed right under us. And it's possible for old long name to be freed after rename, leading to UAF here. Cc: stable@kernel.org # v2.6.2+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |