Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USER_REGS can currently only collected implicitely with call graph
recording. Sometimes it is useful to see them separately, and filter
them. Add a new --user-regs option to record that is similar to
--intr-regs, but acts on user regs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170905170029.19722-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support new sample type PERF_SAMPLE_PHYS_ADDR for physical address.
Add new option --phys-data to record sample physical address.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-2-git-send-email-kan.liang@intel.com
[ Added missing printing in evsel.c patch sent by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We create many test events before the real ones just to test specific
features. But there's no way for attr tests to separate those test
events from those it needs to check.
Adding 'ready' call from the events open interface to trigger/start
events collection for attr test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_evsel::ignore_missing_cpu_thread bool.
When set true, it allows perf to ignore error of missing pid of perf
event syscall.
We remove missing thread id from the thread_map, so the rest of the
processing like ioctl and mmap won't get disturbed with -1 fd.
The reason for supporting this is to ease up monitoring group of pids,
that 'disappear' before perf opens their event. This currently leads
perf to report error and exit and makes perf record's -u option unusable
under certain setup.
With this change we will allow this race and ignore such failure with
following warning:
WARNING: Ignored open failure for pid 8605
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And remove it from tools/perf/{perf,util}.h, making code that needs
these macros to include linux/time64.h instead, to match how this is
used in the kernel sources.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e69fc1pvkgt57yvxqt6eunyg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --sample-cpu option to be able to explicitly enable CPU sample
type. Currently it's only enable implicitly in case the target is cpu
related.
It will be useful for following c2c record tool.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When working with overwritable ring buffer there's a inconvenience
problem: if perf dumps data after a long period after it starts,
non-sample events may lost, which makes following 'perf report' unable
to identify proc name and mmap layout. For example:
# perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output \
dd if=/dev/zero of=/dev/null
send SIGUSR2 after dd runs long enough. The resuling perf.data lost
correct comm and mmap events:
# perf script -i perf.data.2016061522374354
perf 24478 [004] 2581325.601789: raw_syscalls:sys_exit: NR 0 = 512
^^^^
Should be 'dd'
27b2e8 syscall_slow_exit_work+0xfe2000e3 (/lib/modules/4.6.0-rc3+/build/vmlinux)
203cc7 do_syscall_64+0xfe200117 (/lib/modules/4.6.0-rc3+/build/vmlinux)
b18d83 return_from_SYSCALL_64+0xfe200000 (/lib/modules/4.6.0-rc3+/build/vmlinux)
7f47c417edf0 [unknown] ([unknown])
^^^^^^^^^^^^
Fail to unwind
This patch provides a '--tail-synthesize' option, allows perf to collect
system status when finalizing output file. In resuling output file, the
non-sample events reflect system status when dumping data.
After this patch:
# perf record -m 4 -e raw_syscalls:* -g --overwrite --switch-output --tail-synthesize \
dd if=/dev/zero of=/dev/null
# perf script -i perf.data.2016061600544998
dd 27364 [004] 2583244.994464: raw_syscalls:sys_enter: NR 1 (1, ...
^^
Correct comm
203a18 syscall_trace_enter_phase2+0xfe2001a8 ([kernel.kallsyms])
203aa5 syscall_trace_enter+0xfe200055 ([kernel.kallsyms])
203caa do_syscall_64+0xfe2000fa ([kernel.kallsyms])
b18d83 return_from_SYSCALL_64+0xfe200000 ([kernel.kallsyms])
d8e50 __GI___libc_write+0xffff01d9639f4010 (/tmp/oxygen_root-w00229757/lib64/libc-2.18.so)
^^^^^
Correct unwind
This option doesn't aim to solve this problem completely. If a process
terminates before SIGUSR2, we still lost its COMM and MMAP events. For
example, we can't unwind correctly from the final perf.data we get from
the previous example, because when perf collects the final output file
(when we press C-c), 'dd' has been terminated so its '/proc/<pid>/mmap'
becomes empty.
However, this is a cheaper choice. To completely solve this problem we
need to continously output non-sample events. To satisify the
requirement of daemonization, we need to merge them periodically. It is
possible but requires much more code and cycles.
Automatically select --tail-synthesize when --overwrite is provided.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-16-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have callchain_param.enabled for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-silwqjc2t25ls42dsvg28pp5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to easily switch all events to user or kernel space with simple
--all-user or --all-kernel options.
This will be handy within perf mem/c2c wrappers to switch easily monitoring
modes.
Committer note:
Testing it:
# perf record --all-kernel --all-user -a sleep 2
Error: option `all-user' cannot be used with all-kernel
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-user Configure all used events to run in user space.
--all-kernel Configure all used events to run in kernel space.
# perf record --all-user --all-kernel -a sleep 2
Error: option `all-kernel' cannot be used with all-user
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--all-kernel Configure all used events to run in kernel space.
--all-user Configure all used events to run in user space.
# perf record --all-user -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.416 MB perf.data (162 samples) ]
# perf report | grep '\[k\]'
# perf record --all-kernel -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.423 MB perf.data (296 samples) ]
# perf report | grep '\[\.\]'
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-2-git-send-email-jolsa@kernel.org
[ Made those options to be mutually exclusive ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the -I/--int-regs option to enablepassing the name
of the registers to sample on interrupt. Registers can be specified by
their symbolic names. For instance on x86, --intr-regs=ax,si.
The motivation is to reduce the size of the perf.data file and the
overhead of sampling by only collecting the registers useful to a
specific analysis. For instance, for value profiling, sampling only the
registers used to passed arguements to functions.
With no parameter, the --intr-regs still records all possible registers
based on the architecture.
To name registers, it is necessary to use the long form of the option,
i.e., --intr-regs:
$ perf record --intr-regs=si,di,r8,r9 .....
To record any possible registers:
$ perf record -I .....
$ perf report --intr-regs ...
To display the register, one can use perf report -D
To list the available registers:
$ perf record --intr-regs=\?
available registers: AX BX CX DX SI DI BP SP IP FLAGS CS SS R8 R9 R10 R11 R12 R13 R14 R15
Signed-off-by: Stephane Eranian <eranian@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441039273-16260-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce callgraph_set to indicate whether the callgraph option was set
by user.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1438162936-59698-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the option -T is used with option --per-thread, then time is still
not sampled. Fix that by using OPT_BOOLEAN_SET to distinguish when the
user used the -T option as opposed to the default case when timestamps
are enabled but only for per-cpu recording.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1436183461-1918-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for making snapshots of AUX area tracing data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-9-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for reading from the AUX area tracing mmap and synthesizing
AUX area tracing events.
This patch introduces an abstraction for recording AUX area data.
Recording is initialized by auxtrace_record__init() which is a weak
function to be implemented by the architecture to provide recording
callbacks.
Recording is mainly handled by auxtrace_mmap__read() and
perf_event__synthesize_auxtrace() but there are callbacks for
miscellaneous needs including validating and processing user options,
populating private data in auxtrace_info_event, and freeing the
structure when finished.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach perf-record about the new perf_event_attr::{use_clockid, clockid}
fields. Add a simple parameter to set the clock (if any) to be used for
the events to be recorded into the data file.
Since we store the entire perf_event_attr in the EVENT_DESC section we
also already store the used clockid in the data file.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/r/20150407154851.GR23123@twins.programming.kicks-ass.net
[ Conditionally define CLOCK_BOOTTIME, at least rhel6 doesn't have it - dsahern
Ditto for CLOCK_MONOTONIC_RAW, sles11sp2 doesn't have it - yunlong.song ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an option to perf record to record running/enabled time for read
events, similar to what stat does.
This is useful to understand multiplexing problems.
Right now the report support is not great, but at least report -D
already supports it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1424819620-16043-1-git-send-email-andi@firstfloor.org
[ Fixed the Documentation entry to match the OPT_BOOLEAN one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the infrastructure to setup, collect and report the interrupt
machine state regs which can be captured by the kernel.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: cebbert.lkml@gmail.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1411559322-16548-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Those are shared with other builtin commands like kvm, script. So
make it accessable from them. This is a preparation of later change
that limiting possible options.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1413990949-13953-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that all callchain config parameters can be read/written to a single
place. It's a preparation to consolidate handling of all callchain
options.
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <mail@milianw.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1411434104-5307-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Into perf-sys.h header, as requested by Peter:
http://lkml.kernel.org/r/20140502115201.GI30445@twins.programming.kicks-ass.net
Adding HAVE_ATTR_TEST define to turn off/on the attribute
test code in the sys_perf_event_open function.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-10-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into new perf-sys.h header.
The main reason is to separate system specific perf data
from perf tool stuff, so it could be used in small test
programs, as requested Peter:
http://lkml.kernel.org/r/20140502115201.GI30445@twins.programming.kicks-ass.net
This separation makes the perf.h header more clear.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-9-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into util/callchain.h header where all callchain related
structures should be.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into util/event.h header where all sample data structures
are defined.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-7-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
It's defined in include/uapi/linux/prctl.h header.
Also it was never used in perf tool.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-6-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding automated test for memory maps lookup within multiple machines
threads.
The test creates 4 threads and separated memory maps. It checks that we
could use thread__find_addr_map function with thread object based on TID
to find memory maps.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1397490723-1992-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Pull arch/tile updates from Chris Metcalf:
"These fix a few stray build issues seen in linux-next, and also add
the minimal required support for perf to tilegx"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: remove unused variable 'devcap'
tile: Fix vDSO compilation issue with allyesconfig
perf tools: Allow building for tile
tile/perf: Support perf_events on tilegx and tilepro
tile: Enable NMIs on return from handle_nmi() without errors
tile: Add support for handling PMC hardware
tile: don't use __get_cpu_var() with structure-typed arguments
tile: avoid overflow in ns2cycles
Introduce futexes to perf-bench and add a program that stresses and
measures the kernel's implementation of the hash table.
This is a multi-threaded program that simply measures the amount of
failed futex wait calls - we only want to deal with the hashing
overhead, so a negative return of futex_wait_setup() is enough to do the
trick.
An example run:
$ perf bench futex hash -t 32
Run summary [PID 10989]: 32 threads, each operating on 1024 [private] futexes for 10 secs.
[thread 0] futexes: 0x19d9b10 ... 0x19dab0c [ 418713 ops/sec ]
[thread 1] futexes: 0x19daca0 ... 0x19dbc9c [ 469913 ops/sec ]
[thread 2] futexes: 0x19dbe30 ... 0x19dce2c [ 479744 ops/sec ]
...
[thread 31] futexes: 0x19fbb80 ... 0x19fcb7c [ 464179 ops/sec ]
Averaged 454310 operations/sec (+- 0.84%), total secs = 10
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hp.com>
Link: http://lkml.kernel.org/r/1387081917-9102-2-git-send-email-davidlohr@hp.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested by building perf:
- Cross-compiled for tile on x86_64
- Built natively on tile
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Adding people readable output for callchain debug, to get following '-v'
output:
$ perf record -v -g ls
callchain: type DWARF
callchain: stack dump size 4096
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391427883-13443-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding call-graph option support into .perfconfig file, so it's now
possible use call-graph option like:
[top]
call-graph = fp
[record]
call-graph = dwarf,8192
Above options ONLY setup the unwind method. To enable perf record/top to
actually use it the command line option -g/-G must be specified.
The --call-graph option overloads .perfconfig setup.
Assuming above configuration:
$ perf record -g ls
- enables dwarf unwind with user stack size dump 8192 bytes
$ perf top -G
- enables frame pointer unwind
$ perf record --call-graph=fp ls
- enables frame pointer unwind
$ perf top --call-graph=dwarf,4096 ls
- enables dwarf unwind with user stack size dump 4096 bytes
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1391427883-13443-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Someone got the load and store barriers mixed up for AAAAARGH64. Turn
them the right side up.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Fixes: a94d342b9c ("tools/perf: Add required memory barriers")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20140124154002.GF31570@twins.programming.kicks-ass.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested using kernel tracepoints on a QEMU simulated environment.
Kernel support for perf depends on the patch "xtensa: enable
HAVE_PERF_EVENTS", which is scheduled for v3.14.
Hardware performance counters are not supported under xtensa yet.
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-xtensa@linux-xtensa.org
Link: http://lkml.kernel.org/r/aafcdb22f04e2d3188d2938528939481be56b649.1389608855.git.baruch@tkos.co.il
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is how the option summary describes it and so that we can free
--delay to replace --initial-delay and then be consistent with stat's
--delay equivalent option.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-f8hd2010uhjl2zzb34hepbmi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat has a --delay option to delay measuring the workload.
This is useful to skip measuring the startup phase of the program, which
is often very different from the main workload.
The same is useful for perf record when sampling.
--no-delay was already taken, so add a --initial-delay
to perf record too.
-D was already taken for record, so there is only a long option.
v2: Don't disable group members (Namhyung Kim)
v3: port to latest perf/core
rename to --initial-delay to avoid conflict with --no-delay
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1389476307-2124-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reduce typing, functions use class__method convention, so unlikely to
clash with other libraries.
This actually was discussed in the "Link:" referenced message below.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The change to per-cpu mmaps causes the -p, -t and -u options now to have
inheritance enabled by default. Change that back to no inheritance but
for the -t option only.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Getting unwieldly long, for this app domain should be descriptive enough
and the use of __ to separate the class from the method names should
help with avoiding clashes with other code bases.
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131112113427.GA4053@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar