Regression of 346874c9: PAE is set in long mode, but that does not mean
we have valid PDPTRs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Treat monitor and mwait instructions as nop, which is architecturally
correct (but inefficient) behavior. We do this to prevent misbehaving
guests (e.g. OS X <= 10.7) from crashing after they fail to check for
monitor/mwait availability via cpuid.
Since mwait-based idle loops relying on these nop-emulated instructions
would keep the host CPU pegged at 100%, do NOT advertise their presence
via cpuid, to prevent compliant guests from using them inadvertently.
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems that it's easy to implement the EOI assist
on top of the PV EOI feature: simply convert the
page address to the format expected by PV EOI.
Notes:
-"No EOI required" is set only if interrupt injected
is edge triggered; this is true because level interrupts are going
through IOAPIC which disables PV EOI.
In any case, if guest triggers EOI the bit will get cleared on exit.
-For migration, set of HV_X64_MSR_APIC_ASSIST_PAGE sets
KVM_PV_EOI_EN internally, so restoring HV_X64_MSR_APIC_ASSIST_PAGE
seems sufficient
In any case, bit is cleared on exit so worst case it's never re-enabled
-no handling of PV EOI data is performed at HV_X64_MSR_EOI write;
HV_X64_MSR_EOI is a separate optimization - it's an X2APIC
replacement that lets you do EOI with an MSR and not IO.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In long-mode, bit 7 in the PDPTE is not reserved only if 1GB pages are
supported by the CPU. Currently the bit is considered by KVM as always
reserved.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The RSP register is not automatically cached, causing mov DR instruction with
RSP to fail. Instead the regular register accessing interface should be used.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While running a nested guest, we should disable APIC virtualization
controls (virtualized APIC register accesses, virtual interrupt
delivery and posted interrupts), because we do not expose them to
the nested guest.
Reported-by: Hu Yaohui <loki2441@gmail.com>
Suggested-by: Abel Gordon <abel@stratoscale.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some checks are common to all, and moreover,
according to the spec, the check for whether any bits
beyond the physical address width are set are also
applicable to all of them
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The spec mandates that if the vmptrld or vmclear
address is equal to the vmxon region pointer, the
instruction should fail with error "VMPTRLD with
VMXON pointer" or "VMCLEAR with VMXON pointer"
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the vmxon region isn't used in the nested case.
However, according to the spec, the vmxon instruction performs
additional sanity checks on this region and the associated
pointer. Modify emulated vmxon to better adhere to the spec
requirements
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Our common function for vmptr checks (in 2/4) needs to fetch
the memory address
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As requested by Linus add explicit __visible to the asmlinkage users.
This marks all functions visible to assembler.
Tree sweep for arch/x86/*
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch moves the 'kvm_pio' tracepoint to emulator_pio_in_emulated()
and emulator_pio_out_emulated(), and it adds an argument (a pointer to
the 'pio_data'). A single 8-bit or 16-bit or 32-bit data item is fetched
from 'pio_data' (depending on 'size'), and the value is included in the
trace record ('val'). If 'count' is greater than one, this is indicated
by the string "(...)" in the trace output.
Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invariant TSC is a property of TSC, no additional
support code necessary.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We track shadow vmcs fields through two static lists,
one for read only and another for r/w fields. However, with
addition of new vmcs fields, not all fields may be supported on
all hosts. If so, copy_vmcs12_to_shadow() trying to vmwrite on
unsupported hosts will result in a vmwrite error. For example, commit
36be0b9deb introduced GUEST_BNDCFGS, which is not supported
by all processors. Filter out host unsupported fields before
letting guests use shadow vmcs
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now we can flush all the TLBs out of the mmu lock without TLB corruption when
write-proect the sptes, it is because:
- we have marked large sptes readonly instead of dropping them that means we
just change the spte from writable to readonly so that we only need to care
the case of changing spte from present to present (changing the spte from
present to nonpresent will flush all the TLBs immediately), in other words,
the only case we need to care is mmu_spte_update()
- in mmu_spte_update(), we haved checked
SPTE_HOST_WRITEABLE | PTE_MMU_WRITEABLE instead of PT_WRITABLE_MASK, that
means it does not depend on PT_WRITABLE_MASK anymore
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Relax the tlb flush condition since we will write-protect the spte out of mmu
lock. Note lockless write-protection only marks the writable spte to readonly
and the spte can be writable only if both SPTE_HOST_WRITEABLE and
SPTE_MMU_WRITEABLE are set (that are tested by spte_is_locklessly_modifiable)
This patch is used to avoid this kind of race:
VCPU 0 VCPU 1
lockless wirte protection:
set spte.w = 0
lock mmu-lock
write protection the spte to sync shadow page,
see spte.w = 0, then without flush tlb
unlock mmu-lock
!!! At this point, the shadow page can still be
writable due to the corrupt tlb entry
Flush all TLB
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Currently, kvm zaps the large spte if write-protected is needed, the later
read can fault on that spte. Actually, we can make the large spte readonly
instead of making them un-present, the page fault caused by read access can
be avoided
The idea is from Avi:
| As I mentioned before, write-protecting a large spte is a good idea,
| since it moves some work from protect-time to fault-time, so it reduces
| jitter. This removes the need for the return value.
This version has fixed the issue reported in 6b73a9606, the reason of that
issue is that fast_page_fault() directly sets the readonly large spte to
writable but only dirty the first page into the dirty-bitmap that means
other pages are missed. Fixed it by only the normal sptes (on the
PT_PAGE_TABLE_LEVEL level) can be fast fixed
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Using sp->role.level instead of @level since @level is not got from the
page table hierarchy
There is no issue in current code since the fast page fault currently only
fixes the fault caused by dirty-log that is always on the last level
(level = 1)
This patch makes the code more readable and avoids potential issue in the
further development
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This reverts commit 5befdc385d.
Since we will allow flush tlb out of mmu-lock in the later
patch
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If EFER.LMA is off, cs.l does not determine execution mode.
Currently, the emulation engine assumes differently.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The IN instruction is not be affected by REP-prefix as INS is. Therefore, the
emulation should ignore the REP prefix as well. The current emulator
implementation tries to perform writeback when IN instruction with REP-prefix
is emulated. This causes it to perform wrong memory write or spurious #GP
exception to be injected to the guest.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
According to Intel specifications, PAE and non-PAE does not have any reserved
bits. In long-mode, regardless to PCIDE, only the high bits (above the
physical address) are reserved.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
If a guest enables a performance counter but does not enable PMI, the
hypervisor currently does not reprogram the performance counter once it
overflows. As a result the host performance counter is kept with the original
sampling period which was configured according to the value of the guest's
counter when the counter was enabled.
Such behaviour can cause very bad consequences. The most distrubing one can
cause the guest not to make any progress at all, and keep exiting due to host
PMI before any guest instructions is exeucted. This situation occurs when the
performance counter holds a very high value when the guest enables the
performance counter. As a result the host's sampling period is configured to be
very short. The host then never reconfigures the sampling period and get stuck
at entry->PMI->exit loop. We encountered such a scenario in our experiments.
The solution is to reprogram the counter even if the guest does not use PMI.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Some Type 1 hypervisors such as XEN won't enable VMX without it present
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This feature emulates the "Acknowledge interrupt on exit" behavior.
We can safely emulate it for L1 to run L2 even if L0 itself has it
disabled (to run L1).
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
For single context invalidation, we fall through to global
invalidation in handle_invept() except for one case - when
the operand supplied by L1 is different from what we have in
vmcs12. However, typically hypervisors will only call invept
for the currently loaded eptp, so the condition will
never be true.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When entering an exception after an ICEBP, the saved instruction
pointer should point to after the instruction.
This fixes the bug here: https://bugs.launchpad.net/qemu/+bug/1119686
Signed-off-by: Huw Davies <huw@codeweavers.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
According to Intel specifications, only general purpose registers and segment
selectors should be saved in the old TSS during 32-bit task-switch.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
With KVM, MMIO is much slower than PIO, due to the need to
do page walk and emulation. But with EPT, it does not have to be: we
know the address from the VMCS so if the address is unique, we can look
up the eventfd directly, bypassing emulation.
Unfortunately, this only works if userspace does not need to match on
access length and data. The implementation adds a separate FAST_MMIO
bus internally. This serves two purposes:
- minimize overhead for old userspace that does not use eventfd with lengtth = 0
- minimize disruption in other code (since we don't know the length,
devices on the MMIO bus only get a valid address in write, this
way we don't need to touch all devices to teach them to handle
an invalid length)
At the moment, this optimization only has effect for EPT on x86.
It will be possible to speed up MMIO for NPT and MMU using the same
idea in the future.
With this patch applied, on VMX MMIO EVENTFD is essentially as fast as PIO.
I was unable to detect any measureable slowdown to non-eventfd MMIO.
Making MMIO faster is important for the upcoming virtio 1.0 which
includes an MMIO signalling capability.
The idea was suggested by Peter Anvin. Lots of thanks to Gleb for
pre-review and suggestions.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is sometimes benefitial to ignore IO size, and only match on address.
In hindsight this would have been a better default than matching length
when KVM_IOEVENTFD_FLAG_DATAMATCH is not set, In particular, this kind
of access can be optimized on VMX: there no need to do page lookups.
This can currently be done with many ioeventfds but in a suboptimal way.
However we can't change kernel/userspace ABI without risk of breaking
some applications.
Use len = 0 to mean "ignore length for matching" in a more optimal way.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
KVM does not handle the reserved bits of x86 page tables correctly:
In PAE, bits 5:8 are reserved in the PDPTE.
In IA-32e, bit 8 is not reserved.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pull KVM fixes from Marcelo Tosatti:
- Fix for guest triggerable BUG_ON (CVE-2014-0155)
- CR4.SMAP support
- Spurious WARN_ON() fix
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: remove WARN_ON from get_kernel_ns()
KVM: Rename variable smep to cr4_smep
KVM: expose SMAP feature to guest
KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
KVM: Add SMAP support when setting CR4
KVM: Remove SMAP bit from CR4_RESERVED_BITS
KVM: ioapic: try to recover if pending_eoi goes out of range
KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
Rename variable smep to cr4_smep, which can better reflect the
meaning of the variable.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
SMAP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMAP needs to be
manually disabled when guest switches to non-paging mode.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This patch adds SMAP handling logic when setting CR4 for guests
Thanks a lot to Paolo Bonzini for his suggestion to use the branchless
way to detect SMAP violation.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The purpose of this single series of commits from Srivatsa S Bhat (with
a small piece from Gautham R Shenoy) touching multiple subsystems that use
CPU hotplug notifiers is to provide a way to register them that will not
lead to deadlocks with CPU online/offline operations as described in the
changelog of commit 93ae4f978c (CPU hotplug: Provide lockless versions
of callback registration functions).
The first three commits in the series introduce the API and document it
and the rest simply goes through the users of CPU hotplug notifiers and
converts them to using the new method.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=SW7Q
-----END PGP SIGNATURE-----
Merge tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
"The purpose of this single series of commits from Srivatsa S Bhat
(with a small piece from Gautham R Shenoy) touching multiple
subsystems that use CPU hotplug notifiers is to provide a way to
register them that will not lead to deadlocks with CPU online/offline
operations as described in the changelog of commit 93ae4f978c ("CPU
hotplug: Provide lockless versions of callback registration
functions").
The first three commits in the series introduce the API and document
it and the rest simply goes through the users of CPU hotplug notifiers
and converts them to using the new method"
* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
net/iucv/iucv.c: Fix CPU hotplug callback registration
net/core/flow.c: Fix CPU hotplug callback registration
mm, zswap: Fix CPU hotplug callback registration
mm, vmstat: Fix CPU hotplug callback registration
profile: Fix CPU hotplug callback registration
trace, ring-buffer: Fix CPU hotplug callback registration
xen, balloon: Fix CPU hotplug callback registration
hwmon, via-cputemp: Fix CPU hotplug callback registration
hwmon, coretemp: Fix CPU hotplug callback registration
thermal, x86-pkg-temp: Fix CPU hotplug callback registration
octeon, watchdog: Fix CPU hotplug callback registration
oprofile, nmi-timer: Fix CPU hotplug callback registration
intel-idle: Fix CPU hotplug callback registration
clocksource, dummy-timer: Fix CPU hotplug callback registration
drivers/base/topology.c: Fix CPU hotplug callback registration
acpi-cpufreq: Fix CPU hotplug callback registration
zsmalloc: Fix CPU hotplug callback registration
scsi, fcoe: Fix CPU hotplug callback registration
scsi, bnx2fc: Fix CPU hotplug callback registration
scsi, bnx2i: Fix CPU hotplug callback registration
...
Pull kvm updates from Paolo Bonzini:
"PPC and ARM do not have much going on this time. Most of the cool
stuff, instead, is in s390 and (after a few releases) x86.
ARM has some caching fixes and PPC has transactional memory support in
guests. MIPS has some fixes, with more probably coming in 3.16 as
QEMU will soon get support for MIPS KVM.
For x86 there are optimizations for debug registers, which trigger on
some Windows games, and other important fixes for Windows guests. We
now expose to the guest Broadwell instruction set extensions and also
Intel MPX. There's also a fix/workaround for OS X guests, nested
virtualization features (preemption timer), and a couple kvmclock
refinements.
For s390, the main news is asynchronous page faults, together with
improvements to IRQs (floating irqs and adapter irqs) that speed up
virtio devices"
* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
KVM: PPC: Book3S HV: Add transactional memory support
KVM: Specify byte order for KVM_EXIT_MMIO
KVM: vmx: fix MPX detection
KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
KVM: s390: clear local interrupts at cpu initial reset
KVM: s390: Fix possible memory leak in SIGP functions
KVM: s390: fix calculation of idle_mask array size
KVM: s390: randomize sca address
KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
KVM: Bump KVM_MAX_IRQ_ROUTES for s390
KVM: s390: irq routing for adapter interrupts.
KVM: s390: adapter interrupt sources
...
Pull x86 cpufeature update from Ingo Molnar:
"Two refinements to clflushopt support"
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, cpufeature: If we disable CLFLUSH, we should disable CLFLUSHOPT
x86, cpufeature: Rename X86_FEATURE_CLFLSH to X86_FEATURE_CLFLUSH
kvm_x86_ops is still NULL at this point. Since kvm_init_msr_list
cannot fail, it is safe to initialize it before the call.
Fixes: 93c4adc7af
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Subsystems that want to register CPU hotplug callbacks, as well as perform
initialization for the CPUs that are already online, often do it as shown
below:
get_online_cpus();
for_each_online_cpu(cpu)
init_cpu(cpu);
register_cpu_notifier(&foobar_cpu_notifier);
put_online_cpus();
This is wrong, since it is prone to ABBA deadlocks involving the
cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently
with CPU hotplug operations).
Instead, the correct and race-free way of performing the callback
registration is:
cpu_notifier_register_begin();
for_each_online_cpu(cpu)
init_cpu(cpu);
/* Note the use of the double underscored version of the API */
__register_cpu_notifier(&foobar_cpu_notifier);
cpu_notifier_register_done();
Fix the kvm code in x86 by using this latter form of callback registration.
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When doing nested virtualization, we may be able to read BNDCFGS but
still not be allowed to write to GUEST_BNDCFGS in the VMCS. Guard
writes to the field with vmx_mpx_supported(), and similarly hide the
MSR from userspace if the processor does not support the field.
We could work around this with the generic MSR save/load machinery,
but there is only a limited number of MSR save/load slots and it is
not really worthwhile to waste one for a scenario that should not
happen except in the nested virtualization case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is simple to do, the "host" BNDCFGS is either 0 or the guest value.
However, both controls have to be present. We cannot provide MPX if
we only have one of the "load BNDCFGS" or "clear BNDCFGS" controls.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
XSAVE support for KVM is already using host_xcr0 & KVM_SUPPORTED_XCR0 as
a "dynamic" version of KVM_SUPPORTED_XCR0.
However, this is not enough because the MPX bits should not be presented
to the guest unless kvm_x86_ops confirms the support. So, replace all
instances of host_xcr0 & KVM_SUPPORTED_XCR0 with a new function
kvm_supported_xcr0() that also has this check.
Note that here:
if (xstate_bv & ~KVM_SUPPORTED_XCR0)
return -EINVAL;
if (xstate_bv & ~host_cr0)
return -EINVAL;
the code is equivalent to
if ((xstate_bv & ~KVM_SUPPORTED_XCR0) ||
(xstate_bv & ~host_cr0)
return -EINVAL;
i.e. "xstate_bv & (~KVM_SUPPORTED_XCR0 | ~host_cr0)" which is in turn
equal to "xstate_bv & ~(KVM_SUPPORTED_XCR0 & host_cr0)". So we should
also use the new function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add emulation for 0x66 prefixed instruction of 0f 28 opcode
that has been added earlier.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both QEMU and KVM have already accumulated a significant number of
optimizations based on the hard-coded assumption that ioapic polarity
will always use the ActiveHigh convention, where the logical and
physical states of level-triggered irq lines always match (i.e.,
active(asserted) == high == 1, inactive == low == 0). QEMU guests
are expected to follow directions given via ACPI and configure the
ioapic with polarity 0 (ActiveHigh). However, even when misbehaving
guests (e.g. OS X <= 10.9) set the ioapic polarity to 1 (ActiveLow),
QEMU will still use the ActiveHigh signaling convention when
interfacing with KVM.
This patch modifies KVM to completely ignore ioapic polarity as set by
the guest OS, enabling misbehaving guests to work alongside those which
comply with the ActiveHigh polarity specified by QEMU's ACPI tables.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gabriel L. Somlo <somlo@cmu.edu>
[Move documentation to KVM_IRQ_LINE, add ia64. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We always disable cr8 intercept in its handler, but only re-enable it
if handling KVM_REQ_EVENT, so there can be a window where we do not
intercept cr8 writes, which allows an interrupt to disrupt a higher
priority task.
Fix this by disabling intercepts in the same function that re-enables
them when needed. This fixes BSOD in Windows 2008.
Cc: <stable@vger.kernel.org>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When not running in guest-debug mode (i.e. the guest controls the debug
registers, having to take an exit for each DR access is a waste of time.
If the guest gets into a state where each context switch causes DR to be
saved and restored, this can take away as much as 40% of the execution
time from the guest.
If the guest is running with vcpu->arch.db == vcpu->arch.eff_db, we
can let it write freely to the debug registers and reload them on the
next exit. We still need to exit on the first access, so that the
KVM_DEBUGREG_WONT_EXIT flag is set in switch_db_regs; after that, further
accesses to the debug registers will not cause a vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike other intercepts, debug register intercepts will be modified
in hot paths if the guest OS is bad or otherwise gets tricked into
doing so.
Avoid calling recalc_intercepts 16 times for debug registers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When preparing the VMCS02, the CPU-based execution controls is computed
by vmx_exec_control. Turn off DR access exits there, too, if the
KVM_DEBUGREG_WONT_EXIT bit is set in switch_db_regs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When not running in guest-debug mode (i.e. the guest controls the debug
registers, having to take an exit for each DR access is a waste of time.
If the guest gets into a state where each context switch causes DR to be
saved and restored, this can take away as much as 40% of the execution
time from the guest.
If the guest is running with vcpu->arch.db == vcpu->arch.eff_db, we
can let it write freely to the debug registers and reload them on the
next exit. We still need to exit on the first access, so that the
KVM_DEBUGREG_WONT_EXIT flag is set in switch_db_regs; after that, further
accesses to the debug registers will not cause a vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When not running in guest-debug mode, the guest controls the debug
registers and having to take an exit for each DR access is a waste
of time. If the guest gets into a state where each context switch
causes DR to be saved and restored, this can take away as much as 40%
of the execution time from the guest.
After this patch, VMX- and SVM-specific code can set a flag in
switch_db_regs, telling vcpu_enter_guest that on the next exit the debug
registers might be dirty and need to be reloaded (syncing will be taken
care of by a new callback in kvm_x86_ops). This flag can be set on the
first access to a debug registers, so that multiple accesses to the
debug registers only cause one vmexit.
Note that since the guest will be able to read debug registers and
enable breakpoints in DR7, we need to ensure that they are synchronized
on entry to the guest---including DR6 that was not synced before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, this works even if the bit is not in "min", because the bit is always
set in MSR_IA32_VMX_ENTRY_CTLS. Mention it for the sake of documentation, and
to avoid surprises if we later switch to MSR_IA32_VMX_TRUE_ENTRY_CTLS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's no longer possible to enter enable_irq_window in guest mode when
L1 intercepts external interrupts and we are entering L2. This is now
caught in vcpu_enter_guest. So we can remove the check from the VMX
version of enable_irq_window, thus the need to return an error code from
both enable_irq_window and enable_nmi_window.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to SDM 27.2.3, IDT vectoring information will not be valid on
vmexits caused by external NMIs. So we have to avoid creating such
scenarios by delaying EXIT_REASON_EXCEPTION_NMI injection as long as we
have a pending interrupt because that one would be migrated to L1's IDT
vectoring info on nested exit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We cannot rely on the hardware-provided preemption timer support because
we are holding L2 in HLT outside non-root mode. Furthermore, emulating
the preemption will resolve tick rate errata on older Intel CPUs.
The emulation is based on hrtimer which is started on L2 entry, stopped
on L2 exit and evaluated via the new check_nested_events hook. As we no
longer rely on hardware features, we can enable both the preemption
timer support and value saving unconditionally.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the check for leaving L2 on pending and intercepted IRQs or NMIs
from the *_allowed handler into a dedicated callback. Invoke this
callback at the relevant points before KVM checks if IRQs/NMIs can be
injected. The callback has the task to switch from L2 to L1 if needed
and inject the proper vmexit events.
The rework fixes L2 wakeups from HLT and provides the foundation for
preemption timer emulation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
commit 0061d53daf introduced a mechanism to execute a global clock
update for a vm. We can apply this periodically in order to propagate
host NTP corrections. Also, if all vcpus of a vm are pinned, then
without an additional trigger, no guest NTP corrections can propagate
either, as the current trigger is only vcpu cpu migration.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we update a vcpu's local clock it may pick up an NTP correction.
We can't wait an indeterminate amount of time for other vcpus to pick
up that correction, so commit 0061d53daf introduced a global clock
update. However, we can't request a global clock update on every vcpu
load either (which is what happens if the tsc is marked as unstable).
The solution is to rate-limit the global clock updates. Marcelo
calculated that we should delay the global clock updates no more
than 0.1s as follows:
Assume an NTP correction c is applied to one vcpu, but not the other,
then in n seconds the delta of the vcpu system_timestamps will be
c * n. If we assume a correction of 500ppm (worst-case), then the two
vcpus will diverge 50us in 0.1s, which is a considerable amount.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e504c9098e (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.
nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup. In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.
The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.
Fixes: e504c9098e
Reported-by: Kashyap Chamarty <kchamart@redhat.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Kashyap Chamarty <kchamart@redhat.com>
Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e504c9098e (kvm, vmx: Fix lazy FPU on nested guest, 2013-11-13)
highlighted a real problem, but the fix was subtly wrong.
nested_read_cr0 is the CR0 as read by L2, but here we want to look at
the CR0 value reflecting L1's setup. In other words, L2 might think
that TS=0 (so nested_read_cr0 has the bit clear); but if L1 is actually
running it with TS=1, we should inject the fault into L1.
The effective value of CR0 in L2 is contained in vmcs12->guest_cr0, use
it.
Fixes: e504c9098e
Reported-by: Kashyap Chamarty <kchamart@redhat.com>
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Tested-by: Kashyap Chamarty <kchamart@redhat.com>
Tested-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The problem occurs when the guest performs a pusha with the stack
address pointing to an mmio address (or an invalid guest physical
address) to start with, but then extending into an ordinary guest
physical address. When doing repeated emulated pushes
emulator_read_write sets mmio_needed to 1 on the first one. On a
later push when the stack points to regular memory,
mmio_nr_fragments is set to 0, but mmio_is_needed is not set to 0.
As a result, KVM exits to userspace, and then returns to
complete_emulated_mmio. In complete_emulated_mmio
vcpu->mmio_cur_fragment is incremented. The termination condition of
vcpu->mmio_cur_fragment == vcpu->mmio_nr_fragments is never achieved.
The code bounces back and fourth to userspace incrementing
mmio_cur_fragment past it's buffer. If the guest does nothing else it
eventually leads to a a crash on a memcpy from invalid memory address.
However if a guest code can cause the vm to be destroyed in another
vcpu with excellent timing, then kvm_clear_async_pf_completion_queue
can be used by the guest to control the data that's pointed to by the
call to cancel_work_item, which can be used to gain execution.
Fixes: f78146b0f9
Signed-off-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org (3.5+)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to scan the entire VCPU array.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We call this "clflush" in /proc/cpuinfo, and have
cpu_has_clflush()... let's be consistent and just call it that.
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-mlytfzjkvuf739okyn40p8a5@git.kernel.org
Read-only large sptes can be created due to read-only faults as
follows:
- QEMU pagetable entry that maps guest memory is read-only
due to COW.
- Guest read faults such memory, COW is not broken, because
it is a read-only fault.
- Enable dirty logging, large spte not nuked because it is read-only.
- Write-fault on such memory causes guest to loop endlessly
(which must go down to level 1 because dirty logging is enabled).
Fix by dropping large spte when necessary.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
emulator_cmpxchg_emulated writes to guest memory, therefore it should
update the dirty bitmap accordingly.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 5d5a80cd172ea6fb51786369bcc23356b1e9e956 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Mon, 24 Feb 2014 18:11:55 +0800
Subject: [PATCH v5 2/3] KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save
Add MSR_IA32_BNDCFGS to msrs_to_save, and corresponding logic
to kvm_get/set_msr().
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 00c920c96127d20d4c3bb790082700ae375c39a0 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Fri, 21 Feb 2014 23:47:18 +0800
Subject: [PATCH] KVM: x86: Fix xsave cpuid exposing bug
EBX of cpuid(0xD, 0) is dynamic per XCR0 features enable/disable.
Bit 63 of XCR0 is reserved for future expansion.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 0750e335eb5860b0b483e217e8a08bd743cbba16 Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Thu, 20 Feb 2014 17:39:32 +0800
Subject: [PATCH] KVM: x86: expose ADX feature to guest
ADCX and ADOX instructions perform an unsigned addition with Carry flag and
Overflow flag respectively.
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From 24ffdce9efebf13c6ed4882f714b2b57ef1141eb Mon Sep 17 00:00:00 2001
From: Liu Jinsong <jinsong.liu@intel.com>
Date: Thu, 20 Feb 2014 17:38:26 +0800
Subject: [PATCH] KVM: x86: expose new instruction RDSEED to guest
RDSEED instruction return a random number, which supplied by a
cryptographically secure, deterministic random bit generator(DRBG).
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should open NMI window right after an iret, but SVM exits before it.
We wanted to single step using the trap flag and then open it.
(or we could emulate the iret instead)
We don't do it since commit 3842d135ff (likely), because the iret exit
handler does not request an event, so NMI window remains closed until
the next exit.
Fix this by making KVM_REQ_EVENT request in the iret handler.
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When this was introduced, kvm_flush_remote_tlbs() could be called
without holding mmu_lock. It is now acknowledged that the function
must be called before releasing mmu_lock, and all callers have already
been changed to do so.
There is no need to use smp_mb() and cmpxchg() any more.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- The floating interrupt controller (flic) that allows us to inject,
clear and inspect non-vcpu local interrupts. This also gives us an
opportunity to fix deficiencies in our existing interrupt definitions.
- Support for asynchronous page faults via the pfault mechanism. Testing
show significant guest performance improvements under host swap.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=z8I9
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-20140130' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
Two new features are added by this patch set:
- The floating interrupt controller (flic) that allows us to inject,
clear and inspect non-vcpu local interrupts. This also gives us an
opportunity to fix deficiencies in our existing interrupt definitions.
- Support for asynchronous page faults via the pfault mechanism. Testing
show significant guest performance improvements under host swap.
By setting a Kconfig option, the architecture can control when
guest notifications will be presented by the apf backend.
There is the default batch mechanism, working as before, where the vcpu
thread should pull in this information.
Opposite to this, there is now the direct mechanism, that will push the
information to the guest.
This way s390 can use an already existing architecture interface.
Still the vcpu thread should call check_completion to cleanup leftovers.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Check for invalid state transitions on guest-initiated updates of
MSR_IA32_APICBASE. This address both enabling of the x2APIC when it is
not supported and all invalid transitions as described in SDM section
10.12.5. It also checks that no reserved bit is set in APICBASE by the
guest.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[Use cpuid_maxphyaddr instead of guest_cpuid_get_phys_bits. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nothing major here, just bugfixes all over the place. The most
interesting part is the ARM guys' virtualized interrupt controller
overhaul, which lets userspace get/set the state and thus enables
migration of ARM VMs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=8sYU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"First round of KVM updates for 3.14; PPC parts will come next week.
Nothing major here, just bugfixes all over the place. The most
interesting part is the ARM guys' virtualized interrupt controller
overhaul, which lets userspace get/set the state and thus enables
migration of ARM VMs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits)
kvm: make KVM_MMU_AUDIT help text more readable
KVM: s390: Fix memory access error detection
KVM: nVMX: Update guest activity state field on L2 exits
KVM: nVMX: Fix nested_run_pending on activity state HLT
KVM: nVMX: Clean up handling of VMX-related MSRs
KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject
KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit
KVM: nVMX: Leave VMX mode on clearing of feature control MSR
KVM: VMX: Fix DR6 update on #DB exception
KVM: SVM: Fix reading of DR6
KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS
add support for Hyper-V reference time counter
KVM: remove useless write to vcpu->hv_clock.tsc_timestamp
KVM: x86: fix tsc catchup issue with tsc scaling
KVM: x86: limit PIT timer frequency
KVM: x86: handle invalid root_hpa everywhere
kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub
kvm: vfio: silence GCC warning
KVM: ARM: Remove duplicate include
arm/arm64: KVM: relax the requirements of VMA alignment for THP
...
Make KVM_MMU_AUDIT kconfig help text readable and collapse
two spaces between words down to one space.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set guest activity state in L1's VMCS according to the VCPUs mp_state.
This ensures we report the correct state in case we L2 executed HLT or
if we put L2 into HLT state and it was now woken up by an event.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When we suspend the guest in HLT state, the nested run is no longer
pending - we emulated it completely. So only set nested_run_pending
after checking the activity state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies the code and also stops issuing warning about writing to
unhandled MSRs when VMX is disabled or the Feature Control MSR is
locked - we do handle them all according to the spec.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Already used by nested SVM for tracing nested vmexit: kvm_nested_vmexit
marks exits from L2 to L0 while kvm_nested_vmexit_inject marks vmexits
that are reflected to L1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of fixing up the vmcs12 after the nested vmexit, pass key
parameters already when calling nested_vmx_vmexit. This will help
tracing those vmexits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When userspace sets MSR_IA32_FEATURE_CONTROL to 0, make sure we leave
root and non-root mode, fully disabling VMX. The register state of the
VCPU is undefined after this step, so userspace has to set it to a
proper state afterward.
This enables to reboot a VM while it is running some hypervisor code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, only bits 0-3 of DR6 "may" be cleared by "certain"
debug exception. So do update them on #DB exception in KVM, but leave
the rest alone, only setting BD and BS in addition to already set bits
in DR6. This also aligns us with kvm_vcpu_check_singlestep.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In contrast to VMX, SVM dose not automatically transfer DR6 into the
VCPU's arch.dr6. So if we face a DR6 read, we must consult a new vendor
hook to obtain the current value. And as SVM now picks the DR6 state
from its VMCB, we also need a set callback in order to write updates of
DR6 back.
Fixes a regression of 020df0794f.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Whenever we change arch.dr7, we also have to call kvm_update_dr7. In
case guest debugging is off, this will synchronize the new state into
hardware.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off: Peter Lieven <pl@kamp.de>
Signed-off: Gleb Natapov
Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>
After some consideration I decided to submit only Hyper-V reference
counters support this time. I will submit iTSC support as a separate
patch as soon as it is ready.
v1 -> v2
1. mark TSC page dirty as suggested by
Eric Northup <digitaleric@google.com> and Gleb
2. disable local irq when calling get_kernel_ns,
as it was done by Peter Lieven <pl@amp.de>
3. move check for TSC page enable from second patch
to this one.
v3 -> v4
Get rid of ref counter offset.
v4 -> v5
replace __copy_to_user with kvm_write_guest
when updateing iTSC page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After the previous patch from Marcelo, the comment before this write
became obsolete. In fact, the write is unnecessary. The calls to
kvm_write_tsc ultimately result in a master clock update as soon as
all TSCs agree and the master clock is re-enabled. This master
clock update will rewrite tsc_timestamp.
So, together with the comment, delete the dead write too.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To fix a problem related to different resolution of TSC and system clock,
the offset in TSC units is approximated by
delta = vcpu->hv_clock.tsc_timestamp - vcpu->last_guest_tsc
(Guest TSC value at (Guest TSC value at last VM-exit)
the last kvm_guest_time_update
call)
Delta is then later scaled using mult,shift pair found in hv_clock
structure (which is correct against tsc_timestamp in that
structure).
However, if a frequency change is performed between these two points,
this delta is measured using different TSC frequencies, but scaled using
mult,shift pair for one frequency only.
The end result is an incorrect delta.
The bug which this code works around is not the only cause for
clock backwards events. The global accumulator is still
necessary, so remove the max_kernel_ns fix and rely on the
global accumulator for no clock backwards events.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e66d2ae7c6 moved the assignment
vcpu->arch.apic_base = value above a condition with
(vcpu->arch.apic_base ^ value), causing that check
to always fail. Use old_value, vcpu->arch.apic_base's
old value, in the condition instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Limit PIT timer frequency similarly to the limit applied by
LAPIC timer.
Cc: stable@kernel.org
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After free_loaded_vmcs executes, the "loaded_vmcs" structure
is kfreed, and now vmx->loaded_vmcs points to a kfreed area.
Subsequent free_loaded_vmcs then attempts to manipulate
vmx->loaded_vmcs.
Switch the order to avoid the problem.
https://bugzilla.redhat.com/show_bug.cgi?id=1047892
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
fix the 'vcpi' typos when apic_debug is enabled.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
According to Table C-1 of Intel SDM 3C, a VM exit happens on an I/O instruction when
"use I/O bitmaps" VM-execution control was 0 _and_ the "unconditional I/O exiting"
VM-execution control was 1. So we can't just check "unconditional I/O exiting" alone.
This patch was improved by suggestion from Jan Kiszka.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway
in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is
most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if
one guest VCPU manipulates the page of another VCPU in L2, we may be
fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in
nested state. That can crash the host later on if nested_ept_get_cr3 is
invoked while L1 already left vmxon and nested.current_vmcs12 became
NULL therefore.
Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Update arch.apic_base before triggering recalculate_apic_map. Otherwise
the recalculation will work against the previous state of the APIC and
will fail to build the correct map when an APIC is hardware-enabled
again.
This fixes a regression of 1e08ec4a13.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It is possible for __direct_map to be called on invalid root_hpa
(-1), two examples:
1) try_async_pf -> can_do_async_pf
-> vmx_interrupt_allowed -> nested_vmx_vmexit
2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit
Then to load_vmcs12_host_state and kvm_mmu_reset_context.
Check for this possibility, let fault exception be regenerated.
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If kvm_get_dr or kvm_set_dr reports that it raised a fault, we must not
advance the instruction pointer. Otherwise the exception will hit the
wrong instruction.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's a pathological case, but still a valid one: If L1 disables APIC
virtualization and also allows L2 to directly write to the APIC page, we
have to forcibly enable APIC virtualization while in L2 if the in-kernel
APIC is in use.
This allows to run the direct interrupt test case in the vmx unit test
without x2APIC.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Giving proper names to the 0 and 1 was once suggested. But since 0 is
returned to the userspace, giving it another name can introduce extra
confusion. This patch just explains the meanings instead.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the commit 15ad7146 ("KVM: Use the scheduler preemption notifiers
to make kvm preemptible"), the remaining stuff in this function is a
simple cond_resched() call with an extra need_resched() check which was
there to avoid dropping VCPUs unnecessarily. Now it is meaningless.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A guest can cause a BUG_ON() leading to a host kernel crash.
When the guest writes to the ICR to request an IPI, while in x2apic
mode the following things happen, the destination is read from
ICR2, which is a register that the guest can control.
kvm_irq_delivery_to_apic_fast uses the high 16 bits of ICR2 as the
cluster id. A BUG_ON is triggered, which is a protection against
accessing map->logical_map with an out-of-bounds access and manages
to avoid that anything really unsafe occurs.
The logic in the code is correct from real HW point of view. The problem
is that KVM supports only one cluster with ID 0 in clustered mode, but
the code that has the bug does not take this into account.
Reported-by: Lars Bull <larsbull@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the
potential to corrupt kernel memory if userspace provides an address that
is at the end of a page. This patches concerts those functions to use
kvm_write_guest_cached and kvm_read_guest_cached. It also checks the
vapic_address specified by userspace during ioctl processing and returns
an error to userspace if the address is not a valid GPA.
This is generally not guest triggerable, because the required write is
done by firmware that runs before the guest. Also, it only affects AMD
processors and oldish Intel that do not have the FlexPriority feature
(unless you disable FlexPriority, of course; then newer processors are
also affected).
Fixes: b93463aa59 ('KVM: Accelerated apic support')
Reported-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Under guest controllable circumstances apic_get_tmcct will execute a
divide by zero and cause a crash. If the guest cpuid support
tsc deadline timers and performs the following sequence of requests
the host will crash.
- Set the mode to periodic
- Set the TMICT to 0
- Set the mode bits to 11 (neither periodic, nor one shot, nor tsc deadline)
- Set the TMICT to non-zero.
Then the lapic_timer.period will be 0, but the TMICT will not be. If the
guest then reads from the TMCCT then the host will perform a divide by 0.
This patch ensures that if the lapic_timer.period is 0, then the division
does not occur.
Reported-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can easily emulate the HLT activity state for L1: If it decides that
L2 shall be halted on entry, just invoke the normal emulation of halt
after switching to L2. We do not depend on specific host features to
provide this, so we can expose the capability unconditionally.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM_(ENTRY|EXIT)_CONTROLS vmcs fields are read/written on each guest
entry but most times it can be avoided since values do not changes.
Keep fields copy in memory to avoid unnecessary reads from vmcs.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should not be using jump labels before they were initialized. Push back
the callback to until after jump label initialization.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
If a nested guest does a NM fault but its CR0 doesn't contain the TS
flag (because it was already cleared by the guest with L1 aid) then we
have to activate FPU ourselves in L0 and then continue to L2. If TS flag
is set then we fallback on the previous behavior, forward the fault to
L1 if it asked for.
Signed-off-by: Anthoine Bourgeois <bourgeois@bertin.fr>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need to copy padding to kernel space first before looking at it.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
I noticed that srcu_read_lock/unlock both have a memory barrier,
so just by moving srcu_read_unlock earlier we can get rid of
one call to smp_mb() using smp_mb__after_srcu_read_unlock instead.
Unsurprisingly, the gain is small but measureable using the unit test
microbenchmark:
before
vmcall in the ballpark of 1410 cycles
after
vmcall in the ballpark of 1360 cycles
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Currently cpuid emulation is traced only when executed by intercept.
Move trace point so that emulator invocation is traced too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
All decode_register() callers check if instruction has rex prefix
to properly decode one byte operand. It make sense to move the check
inside.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
When I was looking at RHEL5.9's failure to start with
unrestricted_guest=0/emulate_invalid_guest_state=1, I got it working with a
slightly older tree than kvm.git. I now debugged the remaining failure,
which was introduced by commit 660696d1 (KVM: X86 emulator: fix
source operand decoding for 8bit mov[zs]x instructions, 2013-04-24)
introduced a similar mis-emulation to the one in commit 8acb4207 (KVM:
fix sil/dil/bpl/spl in the mod/rm fields, 2013-05-30). The incorrect
decoding occurs in 8-bit movzx/movsx instructions whose 8-bit operand
is sil/dil/bpl/spl.
Needless to say, "movzbl %bpl, %eax" does occur in RHEL5.9's decompression
prolog, just a handful of instructions before finally giving control to
the decompressed vmlinux and getting out of the invalid guest state.
Because OpMem8 bypasses decode_modrm, the same handling of the REX prefix
must be applied to OpMem8.
Reported-by: Michele Baldessari <michele@redhat.com>
Cc: stable@vger.kernel.org
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Yet another instruction that we fail to emulate, this time found
in Windows 2008R2 32-bit.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mst can't be blamed for lack of switch entries: the
issue is with msrs actually.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The loop was always using 0 as the index. This means that
any rubbish after the first element of the array went undetected.
It seems reasonable to assume that no KVM userspace did that.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The KVM_SET_XCRS ioctl must accept anything that KVM_GET_XCRS
could return. XCR0's bit 0 is always 1 in real processors with
XSAVE, and KVM_GET_XCRS will always leave bit 0 set even if the
emulated processor does not have XSAVE. So, KVM_SET_XCRS must
ignore that bit when checking for attempts to enable unsupported
save states.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We currently use some ad-hoc arch variables tied to legacy KVM device
assignment to manage emulation of instructions that depend on whether
non-coherent DMA is present. Create an interface for this, adapting
legacy KVM device assignment and adding VFIO via the KVM-VFIO device.
For now we assume that non-coherent DMA is possible any time we have a
VFIO group. Eventually an interface can be developed as part of the
VFIO external user interface to query the coherency of a group.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Default to operating in coherent mode. This simplifies the logic when
we switch to a model of registering and unregistering noncoherent I/O
with KVM.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So far we've succeeded at making KVM and VFIO mostly unaware of each
other, but areas are cropping up where a connection beyond eventfds
and irqfds needs to be made. This patch introduces a KVM-VFIO device
that is meant to be a gateway for such interaction. The user creates
the device and can add and remove VFIO groups to it via file
descriptors. When a group is added, KVM verifies the group is valid
and gets a reference to it via the VFIO external user interface.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This basically came from the need to be able to boot 32-bit Atom SMP
guests on an AMD host, i.e. a host which doesn't support MOVBE. As a
matter of fact, qemu has since recently received MOVBE support but we
cannot share that with kvm emulation and thus we have to do this in the
host. We're waay faster in kvm anyway. :-)
So, we piggyback on the #UD path and emulate the MOVBE functionality.
With it, an 8-core SMP guest boots in under 6 seconds.
Also, requesting MOVBE emulation needs to happen explicitly to work,
i.e. qemu -cpu n270,+movbe...
Just FYI, a fairly straight-forward boot of a MOVBE-enabled 3.9-rc6+
kernel in kvm executes MOVBE ~60K times.
Signed-off-by: Andre Przywara <andre@andrep.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add initial support for handling three-byte instructions in the
emulator.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call it EmulateOnUD which is exactly what we're trying to do with
vendor-specific instructions.
Rename ->only_vendor_specific_insn to something shorter, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a field to the current emulation context which contains the
instruction opcode length. This will streamline handling of opcodes of
different length.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a kvm ioctl which states which system functionality kvm emulates.
The format used is that of CPUID and we return the corresponding CPUID
bits set for which we do emulate functionality.
Make sure ->padding is being passed on clean from userspace so that we
can use it for something in the future, after the ioctl gets cast in
stone.
s/kvm_dev_ioctl_get_supported_cpuid/kvm_dev_ioctl_get_cpuid/ while at
it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the host supports it, we can and should expose it to the guest as
well, just like we already do with PIN_BASED_VIRTUAL_NMIS.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
__vmx_complete_interrupts stored uninjected NMIs in arch.nmi_injected,
not arch.nmi_pending. So we actually need to check the former field in
vmcs12_save_pending_event. This fixes the eventinj unit test when run
in nested KVM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As long as the hardware provides us 2MB EPT pages, we can also expose
them to the guest because our shadow EPT code already supports this
feature.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will use that in the later patch to find the kvm ops handler
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Page pinning is not mandatory in kvm async page fault processing since
after async page fault event is delivered to a guest it accesses page once
again and does its own GUP. Drop the FOLL_GET flag in GUP in async_pf
code, and do some simplifying in check/clear processing.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Gu zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: chai wen <chaiw.fnst@cn.fujitsu.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This patch contains the following two changes:
1. Fix the bug in nested preemption timer support. If vmexit L2->L0
with some reasons not emulated by L1, preemption timer value should
be save in such exits.
2. Add support of "Save VMX-preemption timer value" VM-Exit controls
to nVMX.
With this patch, nested VMX preemption timer features are fully
supported.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
72f857950f broke shadow on EPT. This patch reverts it and fixes PAE
on nEPT (which reverted commit fixed) in other way.
Shadow on EPT is now broken because while L1 builds shadow page table
for L2 (which is PAE while L2 is in real mode) it never loads L2's
GUEST_PDPTR[0-3]. They do not need to be loaded because without nested
virtualization HW does this during guest entry if EPT is disabled,
but in our case L0 emulates L2's vmentry while EPT is enables, so we
cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values
and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3()
is doing, but by clearing cache bits during L2 vmentry we drop values
that kvm_set_cr3() read from memory.
So why the same code does not work for PAE on nEPT? kvm_set_cr3()
reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to
vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs()
uses vcpu->arch.mmu which contain incorrect values. Fix that by using
walk_mmu in ept_(load|save)_pdptrs.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_mmu initialization is mostly filling in function pointers, there is
no way for it to fail. Clean up unused return values.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
They do the same thing, and destroy_kvm_mmu can be confused with
kvm_mmu_destroy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The new_cr3 MMU callback has been a wrapper for mmu_free_roots since commit
e676505 (KVM: MMU: Force cr3 reload with two dimensional paging on mov
cr3 emulation, 2012-07-08).
The commit message mentioned that "mmu_free_roots() is somewhat of an overkill,
but fixing that is more complicated and will be done after this minimal fix".
One year has passed, and no one really felt the need to do a different fix.
Wrap the call with a kvm_mmu_new_cr3 function for clarity, but remove the
callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The free MMU callback has been a wrapper for mmu_free_roots since mmu_free_roots
itself was introduced (commit 17ac10a, [PATCH] KVM: MU: Special treatment
for shadow pae root pages, 2007-01-05), and has always been the same for all
MMU cases. Remove the indirection as it is useless.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This makes the interface more deterministic for userspace, which can expect
(after configuring only the features it supports) to get exactly the same
state from the kernel, independent of the host CPU and kernel version.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
A guest can still attempt to save and restore XSAVE states even if they
have been masked in CPUID leaf 0Dh. This usually is not visible to
the guest, but is still wrong: "Any attempt to set a reserved bit (as
determined by the contents of EAX and EDX after executing CPUID with
EAX=0DH, ECX= 0H) in XCR0 for a given processor will result in a #GP
exception".
The patch also performs the same checks as __kvm_set_xcr in KVM_SET_XSAVE.
This catches migration from newer to older kernel/processor before the
guest starts running.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
XSAVE entries that KVM does not support are reported by
KVM_GET_SUPPORTED_CPUID for leaf 0Dh index 0 if the host supports them;
they should be left out unless there is also hypervisor support for them.
Sub-leafs are correctly handled in supported_xcr0_bit, fix index 0
to match.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
In commit e935b8372c ("KVM: Convert kvm_lock to raw_spinlock"),
the kvm_lock was made a raw lock. However, the kvm mmu_shrink()
function tries to grab the (non-raw) mmu_lock within the scope of
the raw locked kvm_lock being held. This leads to the following:
BUG: sleeping function called from invalid context at kernel/rtmutex.c:659
in_atomic(): 1, irqs_disabled(): 0, pid: 55, name: kswapd0
Preemption disabled at:[<ffffffffa0376eac>] mmu_shrink+0x5c/0x1b0 [kvm]
Pid: 55, comm: kswapd0 Not tainted 3.4.34_preempt-rt
Call Trace:
[<ffffffff8106f2ad>] __might_sleep+0xfd/0x160
[<ffffffff817d8d64>] rt_spin_lock+0x24/0x50
[<ffffffffa0376f3c>] mmu_shrink+0xec/0x1b0 [kvm]
[<ffffffff8111455d>] shrink_slab+0x17d/0x3a0
[<ffffffff81151f00>] ? mem_cgroup_iter+0x130/0x260
[<ffffffff8111824a>] balance_pgdat+0x54a/0x730
[<ffffffff8111fe47>] ? set_pgdat_percpu_threshold+0xa7/0xd0
[<ffffffff811185bf>] kswapd+0x18f/0x490
[<ffffffff81070961>] ? get_parent_ip+0x11/0x50
[<ffffffff81061970>] ? __init_waitqueue_head+0x50/0x50
[<ffffffff81118430>] ? balance_pgdat+0x730/0x730
[<ffffffff81060d2b>] kthread+0xdb/0xe0
[<ffffffff8106e122>] ? finish_task_switch+0x52/0x100
[<ffffffff817e1e94>] kernel_thread_helper+0x4/0x10
[<ffffffff81060c50>] ? __init_kthread_worker+0x
After the previous patch, kvm_lock need not be a raw spinlock anymore,
so change it back.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: kvm@vger.kernel.org
Cc: gleb@redhat.com
Cc: jan.kiszka@siemens.com
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If #PF happens during delivery of an exception into L2 and L1 also do
not have the page mapped in its shadow page table then L0 needs to
generate vmexit to L2 with original event in IDT_VECTORING_INFO, but
current code combines both exception and generates #DF instead. Fix that
by providing nVMX specific function to handle page faults during page
table walk that handles this case correctly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All exceptions should be checked for intercept during delivery to L2,
but we check only #PF currently. Drop nested_run_pending while we are
at it since exception cannot be injected during vmentry anyway.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
[Renamed the nested_vmx_check_exception function. - Paolo]
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If an exception causes vmexit directly it should not be reported in
IDT_VECTORING_INFO during the exit. For that we need to be able to
distinguish between exception that is injected into nested VM and one that
is reinjected because its delivery failed. Fortunately we already have
mechanism to do so for nested SVM, so here we just use correct function
to requeue exceptions and make sure that reinjected exception is not
moved to IDT_VECTORING_INFO during vmexit emulation and not re-checked
for interception during delivery.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
EXIT_REASON_VMLAUNCH/EXIT_REASON_VMRESUME exit does not mean that nested
VM will actually run during next entry. Move setting nested_run_pending
closer to vmentry emulation code and move its clearing close to vmexit to
minimize amount of code that will erroneously run with nested_run_pending
set.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bit 12 is undefined in any of the following cases:
- If the "NMI exiting" VM-execution control is 1 and the "virtual NMIs"
VM-execution control is 0.
- If the VM exit sets the valid bit in the IDT-vectoring information field
Signed-off-by: Gleb Natapov <gleb@redhat.com>
[Add parentheses around & within && - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that we provide EPT support, there is no reason to torture our
guests by hiding the relieving unrestricted guest mode feature. We just
need to relax CR0 checks for always-on bits as PE and PG can now be
switched off.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement and advertise VM_EXIT_SAVE_IA32_EFER. L0 traps EFER writes
unconditionally, so we always find the current L2 value in the
architectural state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fiddling with CR3 for L2 is L1's job. It may set its own, different
identity map or simple leave it alone if unrestricted guest mode is
enabled. This also fixes reading back the current CR3 on L2 exits for
reporting it to L1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_set_cr0 performs checks on the state transition that may prevent
loading L1's cr0. For now we rely on the hardware to catch invalid
states loaded by L1 into its VMCS. Still, consistency checks on the host
state part of the VMCS on guest entry will have to be improved later on.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set "blocked by NMI" flag if EPT violation happens during IRET from NMI
otherwise NMI can be called recursively causing stack corruption.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
After nested vmentry stale cache can be used to reload L2 PDPTR pointers
which will cause L2 guest to fail. Fix it by invalidating cache on nested
vmentry emulation.
https://bugzilla.kernel.org/show_bug.cgi?id=60830
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Page tables in a read-only memory slot will currently cause a triple
fault because the page walker uses gfn_to_hva and it fails on such a slot.
OVMF uses such a page table; however, real hardware seems to be fine with
that as long as the accessed/dirty bits are set. Save whether the slot
is readonly, and later check it when updating the accessed and dirty bits.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Opcode CA
This gets used by a DOS based NetWare guest.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the remaining couple of random shrinkers in the tree to the new
API.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
vcpu in page_fault_can_be_fast() is not used so remove it
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
The offset to add to the hosts monotonic time, kvmclock_offset, is
calculated against the monotonic time at KVM_SET_CLOCK ioctl time.
Request a master clock update at this time, to reduce a potentially
unbounded difference between the values of the masterclock and
the clock value used to calculate kvmclock_offset.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Support for single-step in the emulator (new in 3.12) does not work for
MMIO or PIO writes, because they are completed without returning to
the emulator. This is not worse than what we had in 3.11; still, add
comments so that the issue is not forgotten.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
These will happen due to MMIO.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Note that we are using APIC_DM_REMRD which has reserved usage.
In future if APIC_DM_REMRD usage is standardized, then we should
find some other way or go back to old method.
Suggested-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
kvm_hc_kick_cpu allows the calling vcpu to kick another vcpu out of halt state.
the presence of these hypercalls is indicated to guest via
kvm_feature_pv_unhalt.
Fold pv_unhalt flag into GET_MP_STATE ioctl to aid migration
During migration, any vcpu that got kicked but did not become runnable
(still in halted state) should be runnable after migration.
Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com>
[Raghu: Apic related changes, folding pvunhalted into vcpu_runnable
Added flags for future use (suggested by Gleb)]
[ Raghu: fold pv_unhalt flag as suggested by Eric Northup]
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Advertise VM_EXIT_SAVE_IA32_PAT and VM_EXIT_LOAD_IA32_PAT.
Signed-off-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not report that we can enter the guest in 64-bit mode if the host is
32-bit only. This is not supported by KVM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At least WB must be possible.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When asking vmx to load the PAT MSR for us while switching from L1 to L2
or vice versa, we have to update arch.pat as well as it may later be
used again to load or read out the MSR content.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Tested-by: Arthur Chunqi Li <yzt356@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some additional comments to preexisting code:
Explain who (L0 or L1) handles EPT violation and misconfiguration exits.
Don't mention "shadow on either EPT or shadow" as the only two options.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the last patch of the basic Nested EPT feature, so as to allow
bisection through this patch series: The guest will not see EPT support until
this last patch, and will not attempt to use the half-applied feature.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we let L1 use EPT, we should probably also support the INVEPT instruction.
In our current nested EPT implementation, when L1 changes its EPT table
for L2 (i.e., EPT12), L0 modifies the shadow EPT table (EPT02), and in
the course of this modification already calls INVEPT. But if last level
of shadow page is unsync not all L1's changes to EPT12 are intercepted,
which means roots need to be synced when L1 calls INVEPT. Global INVEPT
should not be different since roots are synced by kvm_mmu_load() each
time EPTP02 changes.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM's existing shadow MMU code already supports nested TDP. To use it, we
need to set up a new "MMU context" for nested EPT, and create a few callbacks
for it (nested_ept_*()). This context should also use the EPT versions of
the page table access functions (defined in the previous patch).
Then, we need to switch back and forth between this nested context and the
regular MMU context when switching between L1 and L2 (when L1 runs this L2
with EPT).
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Inject nEPT fault to L1 guest. This patch is original from Xinhao.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
need_remote_flush() assumes that shadow page is in PT64 format, but
with addition of nested EPT this is no longer always true. Fix it by
bits definitions that depend on host shadow page type.
Reported-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since nEPT doesn't support A/D bit, so we should not set those bit
when build shadow page table.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is the first patch in a series which adds nested EPT support to KVM's
nested VMX. Nested EPT means emulating EPT for an L1 guest so that L1 can use
EPT when running a nested guest L2. When L1 uses EPT, it allows the L2 guest
to set its own cr3 and take its own page faults without either of L0 or L1
getting involved. This often significanlty improves L2's performance over the
previous two alternatives (shadow page tables over EPT, and shadow page
tables over shadow page tables).
This patch adds EPT support to paging_tmpl.h.
paging_tmpl.h contains the code for reading and writing page tables. The code
for 32-bit and 64-bit tables is very similar, but not identical, so
paging_tmpl.h is #include'd twice in mmu.c, once with PTTTYPE=32 and once
with PTTYPE=64, and this generates the two sets of similar functions.
There are subtle but important differences between the format of EPT tables
and that of ordinary x86 64-bit page tables, so for nested EPT we need a
third set of functions to read the guest EPT table and to write the shadow
EPT table.
So this patch adds third PTTYPE, PTTYPE_EPT, which creates functions (prefixed
with "EPT") which correctly read and write EPT tables.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some guest paging modes do not support A/D bits. Add support for such
modes in shadow page code. For such modes PT_GUEST_DIRTY_MASK,
PT_GUEST_ACCESSED_MASK, PT_GUEST_DIRTY_SHIFT and PT_GUEST_ACCESSED_SHIFT
should be set to zero.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch makes guest A/D bits definition to be dependable on paging
mode, so when EPT support will be added it will be able to define them
differently.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For preparation, we just move gpte_access(), prefetch_invalid_gpte(),
s_rsvd_bits_set(), protect_clean_gpte() and is_dirty_gpte() from mmu.c
to paging_tmpl.h.
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_set_cr3() attempts to check if the new cr3 is a valid guest physical
address. The problem is that with nested EPT, cr3 is an *L2* physical
address, not an L1 physical address as this test expects.
As the comment above this test explains, it isn't necessary, and doesn't
correspond to anything a real processor would do. So this patch removes it.
Note that this wrong test could have also theoretically caused problems
in nested NPT, not just in nested EPT. However, in practice, the problem
was avoided: nested_svm_vmexit()/vmrun() do not call kvm_set_cr3 in the
nested NPT case, and instead set the vmcb (and arch.cr3) directly, thus
circumventing the problem. Additional potential calls to the buggy function
are avoided in that we don't trap cr3 modifications when nested NPT is
enabled. However, because in nested VMX we did want to use kvm_set_cr3()
(as requested in Avi Kivity's review of the original nested VMX patches),
we can't avoid this problem and need to fix it.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The existing code for handling cr3 and related VMCS fields during nested
exit and entry wasn't correct in all cases:
If L2 is allowed to control cr3 (and this is indeed the case in nested EPT),
during nested exit we must copy the modified cr3 from vmcs02 to vmcs12, and
we forgot to do so. This patch adds this copy.
If L0 isn't controlling cr3 when running L2 (i.e., L0 is using EPT), and
whoever does control cr3 (L1 or L2) is using PAE, the processor might have
saved PDPTEs and we should also save them in vmcs12 (and restore later).
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent KVM, since http://kerneltrap.org/mailarchive/linux-kvm/2010/5/2/6261577
switch the EFER MSR when EPT is used and the host and guest have different
NX bits. So if we add support for nested EPT (L1 guest using EPT to run L2)
and want to be able to run recent KVM as L1, we need to allow L1 to use this
EFER switching feature.
To do this EFER switching, KVM uses VM_ENTRY/EXIT_LOAD_IA32_EFER if available,
and if it isn't, it uses the generic VM_ENTRY/EXIT_MSR_LOAD. This patch adds
support for the former (the latter is still unsupported).
Nested entry and exit emulation (prepare_vmcs_02 and load_vmcs12_host_state,
respectively) already handled VM_ENTRY/EXIT_LOAD_IA32_EFER correctly. So all
that's left to do in this patch is to properly advertise this feature to L1.
Note that vmcs12's VM_ENTRY/EXIT_LOAD_IA32_EFER are emulated by L0, by using
vmx_set_efer (which itself sets one of several vmcs02 fields), so we always
support this feature, regardless of whether the host supports it.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Nadav Har'El <nyh@il.ibm.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Xinhao Xu <xinhao.xu@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current code always uses arch.mmu to check the reserved bits on guest gpte
which is valid only for L1 guest, we should use arch.nested_mmu instead when
we translate gva to gpa for the L2 guest
Fix it by using @mmu instead since it is adapted to the current mmu mode
automatically
The bug can be triggered when nested npt is used and L1 guest and L2 guest
use different mmu mode
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit 21feb4eb64 tr base is zeroed
during vmexit. Set it to L1's HOST_TR_BASE. This should fix
https://bugzilla.kernel.org/show_bug.cgi?id=60679
Reported-by: Yongjie Ren <yongjie.ren@intel.com>
Reviewed-by: Arthur Chunqi Li <yzt356@gmail.com>
Tested-by: Yongjie Ren <yongjie.ren@intel.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
During nested vmentry into vm86 mode a vcpu state is found to be incorrect
because rflags does not have VM flag set since it is read from the cache
and has L1's value instead of L2's. If emulate_invalid_guest_state=1 L0
KVM tries to emulate it, but emulation does not work for nVMX and it
never should happen anyway. Fix that by using vmx_set_rflags() to set
rflags during nested vmentry which takes care of updating register cache.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This lets debugging work better during emulation of invalid
guest state.
This time the check is done after emulation, but before writeback
of the flags; we need to check the flags *before* execution of the
instruction, we cannot check singlestep_rip because the CS base may
have already been modified.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Conflicts:
arch/x86/kvm/x86.c
This lets debugging work better during emulation of invalid
guest state.
The check is done before emulating the instruction, and (in the case
of guest debugging) reuses EMULATE_DO_MMIO to exit with KVM_EXIT_DEBUG.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jan Kiszka