Pull uaccess.h prepwork from Al Viro:
"Preparations to tree-wide switch to use of linux/uaccess.h (which,
obviously, will allow to start unifying stuff for real). The last step
there, ie
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
`git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`
is not taken here - I would prefer to do it once just before or just
after -rc1. However, everything should be ready for it"
* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove a stray reference to asm/uaccess.h in docs
sparc64: separate extable_64.h, switch elf_64.h to it
score: separate extable.h, switch module.h to it
mips: separate extable.h, switch module.h to it
x86: separate extable.h, switch sections.h to it
remove stray include of asm/uaccess.h from cacheflush.h
mn10300: remove a bogus processor.h->uaccess.h include
xtensa: split uaccess.h into C and asm sides
bonding: quit messing with IOCTL
kill __kernel_ds_p off
mn10300: finish verify_area() off
frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
exceptions: detritus removal
Pull more vfs updates from Al Viro:
">rename2() work from Miklos + current_time() from Deepa"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Replace current_fs_time() with current_time()
fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
fs: Replace CURRENT_TIME with current_time() for inode timestamps
fs: proc: Delete inode time initializations in proc_alloc_inode()
vfs: Add current_time() api
vfs: add note about i_op->rename changes to porting
fs: rename "rename2" i_op to "rename"
vfs: remove unused i_op->rename
fs: make remaining filesystems use .rename2
libfs: support RENAME_NOREPLACE in simple_rename()
fs: support RENAME_NOREPLACE for local filesystems
ncpfs: fix unused variable warning
Use platform_device_register_full() instead of open-coded.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ACPI WDAT table is the preferred way to use hardware watchdog over the
native iTCO_wdt. Windows only uses this table for its hardware watchdog
implementation so we should be relatively safe to trust it has been
validated by OEMs.
Prevent iTCO watchdog creation if we detect that there is an ACPI WDAT
table.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
drivers/platform/x86/dell-smo8800.c is touched due to the following obscenity:
drivers/platform/x86/dell-smo8800.c ->
linux/interrupt.h ->
linux/hardirq.h ->
asm/hardirq.h ->
linux/irq.h ->
asm/hw_irq.h ->
asm/sections.h ->
asm/uaccess.h
is the only chain of includes pulling asm/uaccess.h there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
current_fs_time() uses struct super_block* as an argument.
As per Linus's suggestion, this is changed to take struct
inode* as a parameter instead. This is because the function
is primarily meant for vfs inode timestamps.
Also the function was renamed as per Arnd's suggestion.
Change all calls to current_fs_time() to use the new
current_time() function instead. current_fs_time() will be
deleted.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Added one additional parameter to thermal_zone_device_update() to provide
caller with an optional capability to specify reason.
Currently this event is used by user space governor to trigger different
processing based on event code. Also it saves an additional call to read
temperature when the event is received.
The following events are cuurently defined:
- Unspecified event
- New temperature sample
- Trip point violated
- Trip point changed
- thermal device up and down
- thermal device power capability changed
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Some revisions of the ASUS Q500A series have a keyboard related
issue which is reproducible only after Windows with installed ASUS
tools is started.
In this case the Linux side will have a blocked keyboard or
report incorrect or incomplete hotkey events.
To make Linux work properly again, a complete power down
(unplug power supply and remove battery) is needed.
Linux/atkbd after a clean start will get the following code on VOLUME_UP
key: {0xe0, 0x30, 0xe0, 0xb0}. After Windows, the same key will generate
this codes: {0xe1, 0x23, 0xe0, 0x30, 0xe0, 0xb0}. As result atkdb will
be confused by buggy codes.
This patch is filtering this buggy code out.
https://bugzilla.kernel.org/show_bug.cgi?id=119391
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: Alex Henrie <alexhenrie24@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: acpi4asus-user@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
[dvhart: Add return after pr_warn to avoid false confirmation of filter]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply decouples the error checking of the ACPI status and
the actual BT status, as those two were nested in an if/else check, but
are completely unrelated.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Two of the internal functions are printing an info message, one
whenever the HDD protection level changes, and another when the
driver receives an ACPI event.
This patch changes those two prints to debug, as that information
is more pertaining to debuging purposes.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the code checking for the ACPI status is mixed along with
the actual HDD protection status check.
This patch splits those two checks as they are not related, printing
an error string in case the ACPI call failed, and then check for
actual HDD protection status.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
parse_arg() duplicates the funcionality of kstrtoint() so use the latter
function instead. There is no funcionality change except that in the
case of input being too big -ERANGE will be returned instead of -EINVAL
which is not bad because -ERANGE makes more sense here. The check for
!count is already done by the sysfs core so no need to duplicate it
again. Also, add some minor corrections to error handling to accommodate
the change in return values (parse_arg returned count if everything
succeeded whereas kstrtoint returns 0 in the same situation)
As a result of this patch asus-laptop.ko size is reduced by almost 1%:
add/remove: 0/1 grow/shrink: 1/6 up/down: 1/-149 (-148)
function old new delta
__UNIQUE_ID_vermagic0 69 70 +1
ls_switch_store 133 117 -16
ledd_store 175 159 -16
display_store 157 141 -16
ls_level_store 193 176 -17
gps_store 200 178 -22
sysfs_acpi_set.isra 148 125 -23
parse_arg.part 39 - -39
Total: Before=19160, After=19012, chg -0.77%
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
acpi_video0 doesn't work, asus-wmi brightness interface doesn't work, too.
So, we use native brightness interface to handle the brightness adjustion,
and add quirk_asus_ux303ub.
Signed-off-by: zino lin <linzino7@gmail.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply fixes a typo in the error string printed in
the *_cooling_method_set function.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the success/error checking logic is intermixed, making the
code a bit cumbersome to understand.
This patch changes the affected functions to first check for errors
and take appropriate actions, then check for the supported features.
This patch also separates the error check from the acpi_status and
the tci_raw function call error check, as those two are completely
unrelated and were nested in if/else statements.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch moves all the multiple line variable declaration to a
single line declaration (except variables being initialized)
following the reverse tree order, to conform to the practices
of the kernel.
[dvhart: corrected a couple minor inconsistencies in declaration ordering]
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Kconfig entry controlling compilation of this code is:
drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC
drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We don't replace module.h with init.h since the file already has that.
Cc: Alek Du <alek.du@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
WMI event 0xe00e is received when battery was removed or inserted.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Merge drm updates from Dave Airlie:
"This is the main drm pull request for 4.8.
I'm down with a cold at the moment so hopefully this isn't in too bad
a state, I finished pulling stuff last week mostly (nouveau fixes just
went in today), so only this message should be influenced by illness.
Apologies to anyone who's major feature I missed :-)
Core:
Lockless GEM BO freeing
Non-blocking atomic work
Documentation changes (rst/sphinx)
Prep for new fencing changes
Simple display helpers
Master/auth changes
Register/unregister rework
Loads of trivial patches/fixes.
New stuff:
ARM Mali display driver (not the 3D chip)
sii902x RGB->HDMI bridge
Panel:
Support for new panels
Improved backlight support
Bridge:
Convert ADV7511 to bridge driver
ADV7533 support
TC358767 (DSI/DPI to eDP) encoder chip support
i915:
BXT support enabled by default
GVT-g infrastructure
GuC command submission and fixes
BXT workarounds
SKL/BKL workarounds
Demidlayering device registration
Thundering herd fixes
Missing pci ids
Atomic updates
amdgpu/radeon:
ATPX improvements for better dGPU power control on PX systems
New power features for CZ/BR/ST
Pipelined BO moves and evictions in TTM
GPU scheduler improvements
GPU reset improvements
Overclocking on dGPUs with amdgpu
Polaris powermanagement enabled
nouveau:
GK20A/GM20B volt and clock improvements.
Initial support for GP100/GP104 GPUs, GP104 will not yet support
acceleration due to NVIDIA having not released firmware for them as of yet.
exynos:
Exynos5433 SoC with IOMMU support.
vc4:
Shader validation for branching
imx-drm:
Atomic mode setting conversion
Reworked DMFC FIFO allocation
External bridge support
analogix-dp:
RK3399 eDP support
Lots of fixes.
rockchip:
Lots of small fixes.
msm:
DT bindings cleanups
Shrinker and madvise support
ASoC HDMI codec support
tegra:
Host1x driver cleanups
SOR reworking for DP support
Runtime PM support
omapdrm:
PLL enhancements
Header refactoring
Gamma table support
arcgpu:
Simulator support
virtio-gpu:
Atomic modesetting fixes.
rcar-du:
Misc fixes.
mediatek:
MT8173 HDMI support
sti:
ASOC HDMI codec support
Minor fixes
fsl-dcu:
Suspend/resume support
Bridge support
amdkfd:
Minor fixes.
etnaviv:
Enable GPU clock gating
hisilicon:
Vblank and other fixes"
* tag 'drm-for-v4.8' of git://people.freedesktop.org/~airlied/linux: (1575 commits)
drm/nouveau/gr/nv3x: fix instobj write offsets in gr setup
drm/nouveau/acpi: fix lockup with PCIe runtime PM
drm/nouveau/acpi: check for function 0x1B before using it
drm/nouveau/acpi: return supported DSM functions
drm/nouveau/acpi: ensure matching ACPI handle and supported functions
drm/nouveau/fbcon: fix font width not divisible by 8
drm/amd/powerplay: remove enable_clock_power_gatings_tasks from initialize and resume events
drm/amd/powerplay: move clockgating to after ungating power in pp for uvd/vce
drm/amdgpu: add query device id and revision id into system info entry at CGS
drm/amdgpu: add new definition in bif header
drm/amd/powerplay: rename smum header guards
drm/amdgpu: enable UVD context buffer for older HW
drm/amdgpu: fix default UVD context size
drm/amdgpu: fix incorrect type of info_id
drm/amdgpu: make amdgpu_cgs_call_acpi_method as static
drm/amdgpu: comment out unused defaults_staturn_pro static const structure to fix the build
drm/amdgpu: enable UVD VM only on polaris
drm/amdgpu: increase timeout of IB test
drm/amdgpu: add destroy session when generate VCE destroy msg.
drm/amd: fix deadlock of job_list_lock V2
...
Pull watchdog updates from Wim Van Sebroeck:
"Core:
- min and max timeout improvements, WDOG_HW_RUNNING improvements,
status funtionality
- Add a device managed API for watchdog_register_device()
New watchdog drivers:
- Aspeed SoCs
- Maxim PMIC MAX77620
- Amlogic Meson GXBB SoC
Enhancements:
- support for the r8a7796 watchdog device
- support for F81866 watchdog device
- support for 5th variation of Apollo Lake
- support for MCP78S chipset
- clean-up of softdog.c watchdog device driver
- pic32-wdt and pic32-dmt fixes
- Documentation/watchdog: watchdog-test improvements
- several other fixes and improvements"
* git://www.linux-watchdog.org/linux-watchdog: (50 commits)
watchdog: gpio_wdt: Fix missing platform_set_drvdata() in gpio_wdt_probe()
watchdog: core: Clear WDOG_HW_RUNNING before calling the stop function
watchdog: core: Fix error handling of watchdog_dev_init()
watchdog: pic32-wdt: Fix return value check in pic32_wdt_drv_probe()
watchdog: pic32-dmt: Remove .owner field for driver
watchdog: pic32-wdt: Remove .owner field for driver
watchdog: renesas-wdt: Add support for the r8a7796 wdt
Documentation/watchdog: check return value for magic close
watchdog: sbsa: Drop status function
watchdog: Implement status function in watchdog core
watchdog: tangox: Set max_hw_heartbeat_ms instead of max_timeout
watchdog: change watchdog_need_worker logic
watchdog: add support for MCP78S chipset in nv_tco
watchdog: bcm2835_wdt: remove redundant ->set_timeout callback
watchdog: bcm2835_wdt: constify _ops and _info structures
dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
watchdog: Add Meson GXBB Watchdog Driver
watchdog: qcom: configure BARK time in addition to BITE time
watchdog: qcom: add option for standalone watchdog not in timer block
watchdog: qcom: update device tree bindings
...
Convert asciidoc-formatted docs to rst in accordance with Jonathan's and
Jani's effort to use sphinx for kernel-doc rendering in 4.8.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/4c1b29986fa77772156b1af0c965d3799e43a47b.1467628307.git.lukas@wunner.de
Several new quirks and tweaks for new platforms to existing laptop drivers. A
new ACPI virtual power button driver, similar to the intel-hid driver. A rework
of the dell keymap, using a single sparse keymap for all machines. A few fixes
and cleanups.
intel-vbtn:
- new driver for Intel Virtual Button
intel_pmc_core:
- Convert to DEFINE_DEBUGFS_ATTRIBUTE
fujitsu-laptop:
- Rework brightness of eco led
asus-wmi:
- Add quirk_no_rfkill_wapf4 for the Asus X456UA
- Add quirk_no_rfkill_wapf4 for the Asus X456UF
- Add quirk_no_rfkill for the Asus Z550MA
- Add quirk_no_rfkill for the Asus U303LB
- Add quirk_no_rfkill for the Asus N552VW
- Create quirk for airplane_mode LED
- Add ambient light sensor toggle key
asus-wireless:
- Toggle airplane mode LED
intel_telemetry:
- Remove Monitor MWAIT feature dependency
intel-hid:
- Remove duplicated acpi_remove_notify_handler
fujitsu-laptop:
- Add support for eco LED
- Support touchpad toggle hotkey on Skylake-based models
- Remove unused macros
- Use module name in debug messages
hp-wmi:
- Fix wifi cannot be hard-unblocked
toshiba_acpi:
- Bump driver version and update copyright year
- Remove the position sysfs entry
- Add IIO interface for accelerometer axis data
dell-wmi:
- Add a WMI event code for display on/off
- Generate one sparse keymap for all machines
- Add information about other WMI event codes
- Sort WMI event codes and update comments
- Ignore WMI event code 0xe045
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXl8kKAAoJEKbMaAwKp364UggH/R1vy4IQmvXh4A/VDlAUp4Cs
6Wi71WTBbzFm63wVdHFZpeXzlzBCLEp+XVQI6M4BSQYulfRCWogiRmV7npLXn8Mv
M2JnmV87n0u3bHT5Fn920mC0OeTMHV5YaEap8N3ys0Ej56aHEgjsQYJjjSIz1OpM
1uQTxufiMgUhX0PQskhNnrz+wnIeKatvP/EyxeFsW58T+FXr4xF8VNaqXgNbz1NL
UcWOh580nE92I1UuYjAnC2bi1oi4x63vNL2xgll8Tc0rRuPJWB15Sc7zxdhVLhqX
rV9Mjiu8FLKilQgwzPHm3QGb8o54prJZIUtAKp1qunwlDiM3n+5qrIW7+4GUfyo=
=JSkT
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x8 platform driver updates from Darren Hart:
"Several new quirks and tweaks for new platforms to existing laptop
drivers. A new ACPI virtual power button driver, similar to the
intel-hid driver. A rework of the dell keymap, using a single sparse
keymap for all machines. A few fixes and cleanups.
Summary:
intel-vbtn:
- new driver for Intel Virtual Button
intel_pmc_core:
- Convert to DEFINE_DEBUGFS_ATTRIBUTE
fujitsu-laptop:
- Rework brightness of eco led
asus-wmi:
- Add quirk_no_rfkill_wapf4 for the Asus X456UA
- Add quirk_no_rfkill_wapf4 for the Asus X456UF
- Add quirk_no_rfkill for the Asus Z550MA
- Add quirk_no_rfkill for the Asus U303LB
- Add quirk_no_rfkill for the Asus N552VW
- Create quirk for airplane_mode LED
- Add ambient light sensor toggle key
asus-wireless:
- Toggle airplane mode LED
intel_telemetry:
- Remove Monitor MWAIT feature dependency
intel-hid:
- Remove duplicated acpi_remove_notify_handler
fujitsu-laptop:
- Add support for eco LED
- Support touchpad toggle hotkey on Skylake-based models
- Remove unused macros
- Use module name in debug messages
hp-wmi:
- Fix wifi cannot be hard-unblocked
toshiba_acpi:
- Bump driver version and update copyright year
- Remove the position sysfs entry
- Add IIO interface for accelerometer axis data
dell-wmi:
- Add a WMI event code for display on/off
- Generate one sparse keymap for all machines
- Add information about other WMI event codes
- Sort WMI event codes and update comments
- Ignore WMI event code 0xe045"
* tag 'platform-drivers-x86-v4.8-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (26 commits)
intel-vbtn: new driver for Intel Virtual Button
intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE
fujitsu-laptop: Rework brightness of eco led
asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UA
asus-wmi: Add quirk_no_rfkill_wapf4 for the Asus X456UF
asus-wmi: Add quirk_no_rfkill for the Asus Z550MA
asus-wmi: Add quirk_no_rfkill for the Asus U303LB
asus-wmi: Add quirk_no_rfkill for the Asus N552VW
asus-wmi: Create quirk for airplane_mode LED
asus-wireless: Toggle airplane mode LED
intel_telemetry: Remove Monitor MWAIT feature dependency
intel-hid: Remove duplicated acpi_remove_notify_handler
asus-wmi: Add ambient light sensor toggle key
fujitsu-laptop: Add support for eco LED
fujitsu-laptop: Support touchpad toggle hotkey on Skylake-based models
fujitsu-laptop: Remove unused macros
fujitsu-laptop: Use module name in debug messages
hp-wmi: Fix wifi cannot be hard-unblocked
toshiba_acpi: Bump driver version and update copyright year
toshiba_acpi: Remove the position sysfs entry
...
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- Intel-SoC enhancements (Andy Shevchenko)
- Intel CPU symbolic model definition rework (Dave Hansen)
- ... other misc changes"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/sfi: Enable enumeration of SD devices
x86/pci: Use MRFLD abbreviation for Merrifield
x86/platform/intel-mid: Make vertical indentation consistent
x86/platform/intel-mid: Mark regulators explicitly defined
x86/platform/intel-mid: Rename mrfl.c to mrfld.c
x86/platform/intel-mid: Enable spidev on Intel Edison boards
x86/platform/intel-mid: Extend PWRMU to support Penwell
x86/pci, x86/platform/intel_mid_pci: Remove duplicate power off code
x86/platform/intel-mid: Add pinctrl for Intel Merrifield
x86/platform/intel-mid: Enable GPIO expanders on Edison
x86/platform/intel-mid: Add Power Management Unit driver
x86/platform/atom/punit: Enable support for Merrifield
x86/platform/intel_mid_pci: Rework IRQ0 workaround
x86, thermal: Clean up and fix CPU model detection for intel_soc_dts_thermal
x86, mmc: Use Intel family name macros for mmc driver
x86/intel_telemetry: Use Intel family name macros for telemetry driver
x86/acpi/lss: Use Intel family name macros for the acpi_lpss driver
x86/cpufreq: Use Intel family name macros for the intel_pstate cpufreq driver
x86/platform: Use new Intel model number macros
x86/intel_idle: Use Intel family macros for intel_idle
...
This driver supports power button event in Intel Virtual Button currently.
New Dell XPS 13 requires this driver for the power button.
This driver is copied/modified from intel-hid.c
Most credit goes to the author of intel-hid.c,
Alex Hung <alex.hung@canonical.com>
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The TCO I/O base is 40h rather than the usual 30h, and the re_reboot
bit is at ACPIBASE+8.
Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Refactor the code to use the recently introduced
DEFINE_DEBUGFS_ATTRIBUTE() macro to eliminate boilerplate code.
Make the absence of DEBUG_FS a non-fatal error.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
For the sake of internal consistency, unset maximum brightness of eco
led and make it activatable only on values >= LED_FULL.
Signed-off-by: Matej Groma <matejgroma@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Asus X456UA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.
quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device. This laptop already has a quirk for setting
WAPF=4, so use quirk_no_rfkill_wapf4, which both disables rfkill and
sets WAPF=4.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Angela Traeger <angie@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Asus X456UF has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion.
quirk_no_rfkill prevents asus-wmi from registering RFKill switches at
all for this laptop and allows asus-wireless to drive the LED through
the ASHS ACPI device. This laptop already has a quirk for setting
WAPF=4, so this commit creates a new quirk, quirk_no_rfkill_wapf4, which
both disables rfkill and sets WAPF=4.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Carlo Caione <carlo@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Asus Z550MA has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Ming Shuo Chiu <chiu@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Asus U303LB has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Mousou Yuu <guogaishiwo@gmail.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Asus N552VW has an airplane-mode indicator LED and the WMI WLAN user
bit set, so asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store
the wlan state, which has a side-effect of driving the airplane mode
indicator LED in an inverted fashion. quirk_no_rfkill prevents asus-wmi
from registering RFKill switches at all for this laptop and allows
asus-wireless to drive the LED through the ASHS ACPI device.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some Asus laptops that have an airplane-mode indicator LED, also have
the WMI WLAN user bit set, and the following bits in their DSDT:
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Method (WMNB, 3, Serialized)
{
(...)
If (LEqual (IIA0, 0x00010002))
{
OWGD (IIA1)
Return (One)
}
}
}
}
So when asus-wmi uses ASUS_WMI_DEVID_WLAN_LED (0x00010002) to store the
wlan state, it drives the airplane-mode indicator LED (through the call
to OWGD) in an inverted fashion: the LED is ON when airplane mode is OFF
(since wlan is ON), and vice-versa.
This commit creates a quirk to not register a RFKill switch at all for
these laptops, to allow the asus-wireless driver to drive the airplane
mode LED correctly through the ASHS ACPI device. It also adds a match to
that quirk for the Asus X555UB, which is affected by this problem.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
In the ASHS device we have the HSWC method, which calls either OWGD or
OWGS, depending on its parameter:
Device (ASHS)
{
Name (_HID, "ATK4002") // _HID: Hardware ID
Method (HSWC, 1, Serialized)
{
If ((Arg0 < 0x02))
{
OWGD (Arg0)
Return (One)
}
If ((Arg0 == 0x02))
{
Local0 = OWGS ()
If (Local0)
{
Return (0x05)
}
Else
{
Return (0x04)
}
}
If ((Arg0 == 0x03))
{
Return (0xFF)
}
If ((Arg0 == 0x04))
{
OWGD (Zero)
Return (One)
}
If ((Arg0 == 0x05))
{
OWGD (One)
Return (One)
}
If ((Arg0 == 0x80))
{
Return (One)
}
}
Method (_STA, 0, NotSerialized) // _STA: Status
{
If ((MSOS () >= OSW8))
{
Return (0x0F)
}
Else
{
Return (Zero)
}
}
}
On the Asus laptops that do not have an airplane mode LED, OWGD has an
empty implementation and OWGS simply returns 0. On the ones that have an
airplane mode LED these methods have the following implementation:
Method (OWGD, 1, Serialized)
{
SGPL (0x0203000F, Arg0)
SGPL (0x0203000F, Arg0)
}
Method (OWGS, 0, Serialized)
{
Store (RGPL (0x0203000F), Local0)
Return (Local0)
}
Where OWGD(1) sets the airplane mode LED ON, OWGD(0) set it off, and
OWGS() returns its state.
This commit exposes the airplane mode indicator LED to userspace under
the name asus-wireless::airplane, so it can be driven according to
userspace's policy.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Telemetry capability does not depend on Monitor MWAIT feature.
Signed-off-by: "Yu, Ong Hock" <ong.hock.yu@intel.com>
Acked-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The second call to acpi_remove_notify_handler does not result in panic
or generate error messages, but it is unnecessary and the function
returns with an error. Remove the duplicate call. Correct two improperly
indented lines.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Ausu laptops issue key 0x7A when the toggle ALS key is pressed (Fn+A on
Asus U38N). Update the key_entry so userspace can handle the event.
Tested on Asus U38N.
Signed-off-by: Nick Leiten <nickleiten@gmail.com>
Reviewed-By: Corentin Chary <corentin.chary@gmail.com>
[dvhart: cleaned up commit message and comment line length]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
There is an indicator LED signaling activated power saving mode
on certain Fujitsu laptop models. This has currently no use on Linux.
Export it to userspace.
Signed-off-by: Matej Groma <matejgroma@gmail.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Haswell-based Fujitsu laptops (Lifebook E734/E744/E754) have a touchpad
toggle hotkey (Fn+F4) which is handled transparently to the operating
system: while an ACPI notification is sent to FUJ02B1 when Fn+F4 is
pressed, touchpad state is properly toggled without any explicit support
for this operation in fujitsu-laptop.
Skylake-based models (Lifebook E736/E746/E756) also have that hotkey,
but the touchpad is not toggled transparently to the operating system.
When Fn+F4 is pressed, an ACPI notification is sent to FUJ02E3. A
subsequent call to S000 (FUNC_RFKILL) can be used to determine whether
the touchpad toggle hotkey was pressed so that an input event can be
sent to userspace.
Relevant ACPI code:
Method (_L21, 0, NotSerialized)
{
...
If (AHKF)
{
Notify (\_SB.FEXT, 0x80)
}
...
}
Method (S000, 3, Serialized)
{
Name (_T_0, Zero)
Local0 = Zero
While (One)
{
_T_0 = Arg0
If (_T_0 == Zero)
{
Local0 |= 0x04000000
Local0 |= 0x02000000
Local0 |= 0x00020000
Local0 |= 0x0200
Local0 |= 0x0100
Local0 |= 0x20
}
ElseIf (_T_0 == One)
{
...
If (AHKF & 0x08)
{
Local0 |= 0x04000000
AHKF ^= 0x08
}
...
} ...
Break
}
Return (Local0)
}
Pressing Fn+F4 raises GPE 0x21 and sets bit 3 in AHKF. This in turn
results in bit 26 being set in the value returned by FUNC_RFKILL called
with 1 as its first argument. On Skylake-based models, bit 26 is also
set in the value returned by FUNC_RFKILL called with 0 as its first
argument (this value is saved in fujitsu_hotkey->rfkill_supported upon
module initialization), which suggests that this bit is set on models
which do not handle touchpad toggling transparently to the operating
system.
Note that bit 3 is cleared in AHKF once FUNC_RFKILL is called with 1 as
its first argument, which requires fujitsu-laptop to handle this hotkey
in a different manner than the other, GIRB-based hotkeys: two input
events (press and release) are immediately sent once Fn+F4 is pressed.
Reported-and-tested-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
FUJLAPTOP_* macros were introduced by 20b9373, but have never been used
except FUJLAPTOP_DEBUG, which was made redundant by the previous patch.
ACPI_VIDEO_NOTIFY_* macros were also introduced by 20b9373, but they
have not been needed since 1696d9d.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
vdbg_printk() always prefixes the log messages it generates with
"FUJ02B1", which can be misleading, because it might have been called
while handling a notify for ACPI device FUJ02E3 or during module
initialization etc. Employ pr_fmt() to prefix debug messages with the
module name instead and thus avoid confusion.
Reported-by: Jan-Marek Glogowski <glogow@fbihome.de>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Several users reported wifi cannot be unblocked as discussed in [1].
This patch removes the use of the 2009 flag by BIOS but uses the actual
WMI function calls - it will be skipped if WMI reports unsupported.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=69131
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Tested-by: Evgenii Shatokhin <eugene.shatokhin@yandex.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
After several fixes, and added support for more features (WWAN,
Cooling Method and IIO accelometer axis data), bump the driver
version to 0.24.
Also update the copyright year.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Now that we have proper support for the acceleromeer under the IIO
subsystem, the _position_ sysfs file is now deprecated.
This patch removes all code related to the position sysfs entry.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds the accelerometer axis data to the IIO subsystem.
Currently reporting the X, Y and Z values, as no other data can be
queried given the fact that the accelerometer chip itself is hidden
behind the Toshiba proprietary interface.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some new Dell AIO systems have a button that generates a WMI event to
turn the LCD on/off.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch reworks code for generating sparse keymap and processing WMI
events. It unifies procedure for generating sparse keymap and also unifies
big switch code for processing WMI events of different types. After this
patch dell-wmi driver does not differ between "old" and "new" hotkey type.
It constructs sparse keymap table with all WMI codes. It is because on some
laptops (e.g. Dell Latitude E6440) ACPI/firmware send both event types (old
and new).
Each WMI code in sparse keymap table is prefixed by 16bit event type, so it
does not change functionality on laptops with "old" hotkey support (those
without scancodes in DMI).
This allow us to distinguish between same WMI codes with different types in
sparse keymap. Thanks to this WMI events of type 0x0011 were moved from big
switch into sparse keymap table too.
This patch also fixes possible bug in parsing WMI event buffer introduced
in commit 5ea2559726 ("dell-wmi: Add support for new Dell systems"). That
commit changed buffer type from int* to u16* without fixing code. More at:
http://lkml.iu.edu/hypermail/linux/kernel/1507.0/01950.html
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
ACPI DSDT tables have defined other WMI codes, but does not contain any
description when those codes are emitted. Some other codes can be found in
logs on internet. In this patch are all which I saw, but lot of them are
not tested properly (e.g. for duplicate events with AT keyboard). Now we
have all WMI event codes at one place and in future after proper testing
those codes can be correctly enabled or disabled...
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
For better readability of keymap table, sort events by codes and also
update comments for events to be more informative.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
>From Dell we know that WMI event code 0xe045 is for Num Lock key, but it is
unclear due to message in commit 0b3f6109f0 ("dell-wmi: new driver for
hotkey control").
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Reviewed-by: Michał Kępień <kernel@kempniu.pl>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Link: https://lkml.org/lkml/2015/7/7/830
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The whole menu depends on X86 so there is no point in repeating this
dependency on individual driver entries.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lenovo Thinkpad devices T460, T460s, T460p, T560, X260 use
HKEY version 0x200 without adaptive keyboard.
HKEY version 0x200 has method MHKA with one parameter value.
Passing parameter value 1 will get hotkey_all_mask (the same like
HKEY version 0x100 without parameter). Passing parameter value 2 to
MHKA method will retrieve hotkey_all_adaptive_mask. If 0 is returned in
that case there is no adaptive keyboard available.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Tested-by: Lyude <cpaul@redhat.com>
Tested-by: Marco Trevisan <marco@ubuntu.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
[dvhart: Keep MHKA error string on one line in new and existing pr_err calls]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Newer ideapads support a new mic hotkey implemented via an ACPI
interface. This patch converts the mic mute event to a keycode
KEY_MICMUTE.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Mostly minor updates and cleanups. One new power management controller driver
for Intel Core SoCs.
platform/x86:
- Add PMC Driver for Intel Core SoC
dell-rbtn:
- Ignore ACPI notifications if device is suspended
thinkpad_acpi:
- save kbdlight state on suspend and restore it on resume
intel_menlow:
- reduce code duplication
asus-wmi:
- provide access to ALS control
ideapad-laptop:
- add a new WMI string for ESC key
surfacepro3_button:
- Add a warning when switching to tablet mode
sony-laptop:
- Avoid oops on module unload for older laptops
intel_telemetry:
- Constify telemetry_core_ops structures
fujitsu-laptop:
- Use IS_ENABLED() instead of checking for built-in or module
asus-laptop:
- correct error handling in sysfs_acpi_set
- remove redundant initializers
- correct error handling in asus_read_brightness()
fujitsu-laptop:
- Support radio LED
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXSJh4AAoJEKbMaAwKp3647kkIAIRi8inUCfPQsvpi7iEfaAW7
vaLvIOFfRxu+WHzYOrhrAg17yscA18xTRtp32dhjHF3w6zJsbsZ9nEqCcRliQG2+
/i6EdC1ZnboyWWW82HbFGK8r5PMpPJa2p7wPhrEuPcM3aak+bWfCD96HdjFsoxfT
Vda/2L9grvQwcUczRARh4k6sHQTsdV+tU5MF5Kefso1l31qMyO8A3PNgCPFWtCht
St0hlRs4SnZS97Bw7IIbP93AiLBejT1jtRHddvpEnj7GaPaBMpBSUqN3KgZRVnfL
Bln3iPkq+1TVprcizt60X++czfOAWmce1jF9D4oVS5FGW0yIoog0aik2H1rrY64=
=m/0/
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Mostly minor updates and cleanups. One new power management
controller driver for Intel Core SoCs.
platform/x86:
- Add PMC Driver for Intel Core SoC
dell-rbtn:
- Ignore ACPI notifications if device is suspended
thinkpad_acpi:
- save kbdlight state on suspend and restore it on resume
intel_menlow:
- reduce code duplication
asus-wmi:
- provide access to ALS control
ideapad-laptop:
- add a new WMI string for ESC key
surfacepro3_button:
- Add a warning when switching to tablet mode
sony-laptop:
- Avoid oops on module unload for older laptops
intel_telemetry:
- Constify telemetry_core_ops structures
fujitsu-laptop:
- Use IS_ENABLED() instead of checking for built-in or module
asus-laptop:
- correct error handling in sysfs_acpi_set
- remove redundant initializers
- correct error handling in asus_read_brightness()
fujitsu-laptop:
- Support radio LED"
* tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
platform/x86: Add PMC Driver for Intel Core SoC
dell-rbtn: Ignore ACPI notifications if device is suspended
thinkpad_acpi: save kbdlight state on suspend and restore it on resume
intel_menlow: reduce code duplication
asus-wmi: provide access to ALS control
ideapad-laptop: add a new WMI string for ESC key
surfacepro3_button: Add a warning when switching to tablet mode
sony-laptop: Avoid oops on module unload for older laptops
intel_telemetry: Constify telemetry_core_ops structures
fujitsu-laptop: Use IS_ENABLED() instead of checking for built-in or module
asus-laptop: correct error handling in sysfs_acpi_set
asus-laptop: remove redundant initializers
asus-laptop: correct error handling in asus_read_brightness()
fujitsu-laptop: Support radio LED
This patch adds the Power Management Controller driver as a PCI driver
for Intel Core SoC architecture.
This driver can utilize debugging capabilities and supported features
as exposed by the Power Management Controller.
Please refer to the below specification for more details on PMC features.
http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html
The current version of this driver exposes SLP_S0_RESIDENCY counter.
This counter can be used for detecting fragile SLP_S0 signal related
failures and take corrective actions when PCH SLP_S0 signal is not
asserted after kernel freeze as part of suspend to idle flow
(echo freeze > /sys/power/state).
Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it
detects favorable conditions to enter its low power mode. As a
pre-requisite the SoC should be in deepest possible Package C-State
and devices should be in low power mode. For example, on Skylake SoC
the deepest Package C-State is Package C10 or PC10. Suspend to idle
flow generally leads to PC10 state but PC10 state may not be sufficient
for realizing the platform wide power potential which SLP_S0 signal
assertion can provide.
SLP_S0 signal is often connected to the Embedded Controller (EC) and the
Power Management IC (PMIC) for other platform power management related
optimizations.
In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes
power gated + PLL Idle.
As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed
as an API and also debugfs features are added to indicate SLP_S0 signal
assertion residency in microseconds.
echo freeze > /sys/power/state
wake the system
cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some BIOSes unconditionally send an ACPI notification to RBTN when the
system is resuming from suspend. This makes dell-rbtn send an input
event to userspace as if a function key was pressed. Prevent this by
ignoring all the notifications received while the device is suspended.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=106031
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Tested-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Override default LED class suspend/resume handles, by keeping track of
the brightness level before suspending so that it can be automatically
restored on resume by calling default resume handler.
Signed-off-by: Marco Trevisan (Treviño) <mail@3v1n0.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
aux0_show and aux1_show consists of almost identical code. Pull that
into a common helper and make them thin wrappers. Similarly for
_store.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Asus Zenbook ux31a is providing ACPI0008 interface for ALS
(Ambient Light Sensor), which is accessible for OS => Win 7.
This sensor can be used with iio/acpi-als driver.
Since it is disabled by default, we should use asus-wmi
interface to enable it.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
My patch to the ideapad-laptop driver to get the ESC key working on the
Yoga 1170 (Yoga 3) failed to do the same for the following model, the
Lenovo Yoga 700.
Denis Gordienko managed to get it working by adding another GUID for the
new WMI interface. I have adapted his patch to normal coding style
and simplified it a bit for inclusion, but this patch is currently
untested.
Link: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/m-p/3317499
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Denis Gordienko <denis.gordienko.mail@gmail.com>
[dvhart: Whitespace cleanup, static const char *const array declaration]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Microsoft Surface Book has a tablet mode button. Print another message
once on this event instead of repeating "Unknown event...".
Unfortunately, proper support involves the _DSM method, which is not a
discoverable interface. Just print a warning for now.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages. This
means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than
(as we did before) try to emulate it by switching the line
to an input to get high impedance. This is also documented
throughly in Documentation/gpio/driver.txt for those of you
who did not understand one word of what I just wrote.
- Start to do away with the unnecessarily complex and
unitelligible ARCH_REQUIRE_GPIOLIB and
ARCH_WANT_OPTIONAL_GPIOLIB, another evolutional artifact from
the time when the GPIO subsystem was unmaintained. Archs can
now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs
ACKed the changes immediately so these are included in this
pull request.
- Advancing the use of the data pointer inside the GPIO device
for storing driver data by switching the PowerPC, Super-H
Unicore and a few other subarches or subsystem drivers in
ALSA SoC, Input, serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the
GPIO lines, so that each GPIO descriptor knows - if this
callback is implemented - whether the line is input or
output. This also reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names,
from the device tree. (Platform data has been supported for
a while.) I bet we will get a similar mechanism for ACPI
one of those days. This makes is possible to get sensible
producer names for e.g. GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and
now also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain
and in some cases open source.
- Implement the .get_direction() callback for a few more drivers
like PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized
those who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where
they belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z4d6
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for kernel cycle v4.7:
Core infrastructural changes:
- Support for natively single-ended GPIO driver stages.
This means that if the hardware has registers to configure open
drain or open source configuration, we use that rather than (as we
did before) try to emulate it by switching the line to an input to
get high impedance.
This is also documented throughly in Documentation/gpio/driver.txt
for those of you who did not understand one word of what I just
wrote.
- Start to do away with the unnecessarily complex and unitelligible
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB, another
evolutional artifact from the time when the GPIO subsystem was
unmaintained.
Archs can now just select GPIOLIB and be done with it, cleanups to
arches will trickle in for the next kernel. Some minor archs ACKed
the changes immediately so these are included in this pull request.
- Advancing the use of the data pointer inside the GPIO device for
storing driver data by switching the PowerPC, Super-H Unicore and
a few other subarches or subsystem drivers in ALSA SoC, Input,
serial, SSB, staging etc to use it.
- The initialization now reads the input/output state of the GPIO
lines, so that each GPIO descriptor knows - if this callback is
implemented - whether the line is input or output. This also
reflects nicely in userspace "lsgpio".
- It is now possible to name GPIO producer names, line names, from
the device tree. (Platform data has been supported for a while).
I bet we will get a similar mechanism for ACPI one of those days.
This makes is possible to get sensible producer names for e.g.
GPIO rails in "lsgpio" in userspace.
New drivers:
- New driver for the Loongson1.
- The XLP driver now supports Broadcom Vulcan ARM64.
- The IT87 driver now supports IT8620 and IT8628.
- The PCA953X driver now supports Galileo Gen2.
Driver improvements:
- MCP23S08 was switched to use the gpiolib irqchip helpers and now
also suppors level-triggered interrupts.
- 74x164 and RCAR now supports the .set_multiple() callback
- AMDPT was converted to use generic GPIO.
- TC3589x, TPS65218, SX150X, F7188X, MENZ127, VX855, WM831X, WM8994
support the new single ended callback for open drain and in some
cases open source.
- Implement the .get_direction() callback for a few more drivers like
PL061, Xgene.
Cleanups:
- Paul Gortmaker combed through the drivers and de-modularized those
who are not really modules.
- Move the GPIO poweroff DT bindings to the power subdir where they
belong.
- Rename gpio-generic.c to gpio-mmio.c, which is much more to the
point. That's what it is handling, nothing more, nothing less"
* tag 'gpio-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (126 commits)
MIPS: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
gpio: zevio: make it explicitly non-modular
gpio: timberdale: make it explicitly non-modular
gpio: stmpe: make it explicitly non-modular
gpio: sodaville: make it explicitly non-modular
pinctrl: sh-pfc: Let gpio_chip.to_irq() return zero on error
gpio: dwapb: Add ACPI device ID for DWAPB GPIO controller on X-Gene platforms
gpio: dt-bindings: add wd,mbl-gpio bindings
gpio: of: make it possible to name GPIO lines
gpio: make gpiod_to_irq() return negative for NO_IRQ
gpio: xgene: implement .get_direction()
gpio: xgene: Enable ACPI support for X-Gene GFC GPIO driver
gpio: tegra: Implement gpio_get_direction callback
gpio: set up initial state from .get_direction()
gpio: rename gpio-generic.c into gpio-mmio.c
gpio: generic: fix GPIO_GENERIC_PLATFORM is set to module case
gpio: dwapb: add gpio-signaled acpi event support
gpio: dwapb: convert device node to fwnode
gpio: dwapb: remove name from dwapb_port_property
gpio/qoriq: select IRQ_DOMAIN
...
* acpi-pci:
ACPI,PCI,IRQ: remove SCI penalize function
ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()
ACPI,PCI,IRQ: reduce static IRQ array size to 16
ACPI,PCI,IRQ: reduce resource requirements
* acpi-misc:
ACPI / sysfs: fix error code in get_status()
ACPI / device_sysfs: Clean up checkpatch errors
ACPI / device_sysfs: Change _SUN and _STA show functions error return to EIO
ACPI / device_sysfs: Add sysfs support for _HRV hardware revision
arm64: defconfig: Enable ACPI
ACPI / ARM64: Remove EXPERT dependency for ACPI on ARM64
ACPI / ARM64: Don't enable ACPI by default on ARM64
acer-wmi: Use acpi_dev_found()
eeepc-wmi: Use acpi_dev_found()
ACPI / utils: Rename acpi_dev_present()
* acpi-tools:
tools/power/acpi: close file only if it is open
Older VAIO laptops without the SN00 ACPI method will have the "handles"
variable unset. Return early from sony_nc_function_cleanup when "handles"
is null.
Signed-off-by: Lawrence Yiu <lawyiu.dev@gmail.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The telemetry_core_ops structures are never modified, so declare them as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Properly return rv back to the caller in the case of an error in
parse_arg. In the process remove a unused variable 'out'.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Initializing rv to AE_OK is pointless because later function results are
assigned to them and only then the variable is used
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
It is possible that acpi_evaluate_integer might fail and value would not be
set to any value so correct this defect by returning 0 in case of an
error. This is also the correct thing to return because the backlight
subsystem will print the old value of brightness in this case.
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit 52cbae0127 ("toshiba_acpi: Change default Hotkey enabling value")
changed the hotkeys enabling value, as it was the same value Windows uses,
however, it turns out that the value tells the EC that the driver will now
take care of the hardware events like the physical RFKill switch or the
pointing device toggle button.
This patch reverts such commit by changing the default hotkey enabling
value to 0x09, which enables hotkey events only, making the hardware
buttons working again.
Fixes bugs 113331 and 114941.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the optional IPC resources prevent telemetry driver from
probing if these resources are not in ACPI table. This patch decouples
telemetry driver from these optional resources, so that telemetry driver
has dependency only on the necessary ACPI resources.
Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
If fan_get_status() fails then "s" is not initialized. Tweak the error
handling a bit to silence this warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Presumably "pss_period" and "ioss_period" can't both be zero, but this
function is never called so we can't infer that using static analysis
alone.
Silence the warning by setting "ret" to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
If acpi_evaluate_integer() fails then "lret" isn't initialized. I've
tweaked the error handling to avoid this issue.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lifebook E734/E744/E754 has a LED which the manual calls "radio
components indicator". It should be lit when any radio transmitter is
enabled. Its state can be read and set using ACPI (FUNC interface,
RFKILL method).
Since the Lifebook E734/E744/E754 only has a button (as compared to a
slider) for enabling/disabling radio transmitters, I believe the LED in
question is meant to indicate whether all radio transmitters are
currently on or off. However, pressing the radio toggle button does not
automatically change the hardware state of the transmitters: it looks
like this machine relies on soft rfkill.
As for detecting whether the LED is present on a given machine, I had to
resort to educated guesswork. I assumed this LED is present on all
devices which have a radio toggle button instead of a slider. My
Lifebook E744 holds 0x01010001 in BTNI. By comparing the bits and
buttons with those of a Lifebook E8420 (BTNI=0x000F0101, has a slider),
I put my money on bit 24 as the indicator of the radio toggle button
being present. Furthermore, bit 24 is also clear on the S7020 which
does not have the toggle button or an RF LED.
Figuring out how the LED is controlled was more deterministic as all it
took was decompiling the DSDT and taking a look at method S000 (the
RFKILL method of the FUNC interface).
The LED control method implemented here is unsuitable for use with
"heavy" LED triggers, like phy0rx. Once blinking frequency achieves a
certain level, the system hangs.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
[jwoithe: Comment on bit 24 in BTNI, expanded commit msg]
Signed-off-by: Jonathan Woithe <jwoithe@just42.net>
[dvhart: Minor style and commit log adjustments]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Use shiny new acpi_dev_found() and remove all the boilerplate
to search for a particular ACPI device. No functional change.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use shiny new acpi_dev_found() and remove all the boilerplate
to search for a particular ACPI device. No functional change.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is the same as the original workaround from S3 but for S4. Without
this workaround, a rfkill event will be received and it will toggle
wireless devices when radio hotkey is not pressed.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Significant refactoring of Dell laptop drivers, modularizing the smbios code.
Multiple new platforms added for ideapad, asus, dell, and alienware using
existing quirks. A few fixes and cleanups.
hp-wmi:
- Remove GPS rfkill support via pre-2009 interface
- fix unregister order in hp_wmi_rfkill_setup() once again
ideapad-laptop:
- Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop:
- Support radio toggle button
intel-hid:
- allocate correct amount of memory for private struct
platform/x86:
- Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc:
- Avoid pending IPC1 command during legacy suspend
- Fix GCR register base address and length
asus-nb-wmi:
- add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv:
- Change verbosity control bits
dell-rbtn:
- Add a comment about the XPS 13 9350
dell-wmi, dell-laptop:
- depends DMI
dell-wmi:
- support Dell Inspiron M5110
- properly process Dell Instant Launch hotkey
- enable receiving WMI events on Dell Vostro V131
- Support new hotkeys on the XPS 13 9350 (Skylake)
- Clean up hotkey table size check
- Stop storing pointers to DMI tables
dell-laptop:
- move dell_smi_error() to dell-smbios
- use dell_smbios_find_token() instead of find_token_location()
- use dell_smbios_find_token() instead of find_token_id()
- extract SMBIOS-related code to a separate module
dell-smbios:
- rename dell_smi_error() to dell_smbios_error()
- make da_tokens static
- remove find_token_{id,location}()
- implement new function for finding DMI table 0xDA tokens
- make the SMBIOS buffer static
- return the SMBIOS buffer from dell_smbios_get_buffer()
- don't return an SMBIOS buffer from dell_smbios_send_request()
- don't pass an SMBIOS buffer to dell_smbios_send_request()
- rename dell_send_request() to dell_smbios_send_request()
- rename release_buffer() to dell_smbios_release_buffer()
- rename clear_buffer() to dell_smbios_clear_buffer()
- rename get_buffer() to dell_smbios_get_buffer()
dell-led:
- use dell_smbios_send_request() for performing SMBIOS calls
- use dell_smbios_find_token() for finding mic DMI tokens
toshiba_acpi:
- Add a module parameter to disable hotkeys registration
- Add sysfs entries for the Cooling Method feature
- Add support for cooling method feature
Documentation/ABI:
- Update sysfs-driver-toshiba_acpi file
thinkpad_acpi:
- Remove ambiguous logging for "Unsupported brightness interface"
alienware-wmi:
- whitespace improvements
- Add support for two new systems: ASM200 and ASM201.
- Add support for deep sleep control.
- Add initial support for alienware graphics amplifier.
- Add support for new platform: X51-R3
- Clean up whitespace for ASM100 platform
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJW8s77AAoJEKbMaAwKp364iVgH/18Tpefbc7uOrNak4zfTmvVO
CQjLdbnbCYoeNjwgdYSZNlaR+E2TuMdqmBXXLEr3kqicpmX15l+V5y8xJkDmGpxw
0RmwJnkdIpmkZcjb3/2abOtIuOj1Y/tXCp5mY1FoaDYBQVzO+ZsPEGNQcMu5uJpa
qZTw9UwiSPUspTrHHbS7/Bzv7yFnxlWC1nmt6G5zL4OMEv2AGbuVSstXVGySIML5
TfFdisUBIXQplzwpDytHGqtGUJMc0NnT1s66beuo1oBdEFTFtBNpFySW3goV2nrZ
JPbvyaV3tD24NYNmU9WH653InX4KuaGiJRWVT31a/I5HVVlx7mZdUYRI+EYAnmE=
=e0E4
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Significant refactoring of Dell laptop drivers, modularizing the
smbios code. Multiple new platforms added for ideapad, asus, dell,
and alienware using existing quirks. A few fixes and cleanups.
hp-wmi:
- Remove GPS rfkill support via pre-2009 interface
- fix unregister order in hp_wmi_rfkill_setup() once again
ideapad-laptop:
- Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop:
- Support radio toggle button
intel-hid:
- allocate correct amount of memory for private struct
platform/x86:
- Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc:
- Avoid pending IPC1 command during legacy suspend
- Fix GCR register base address and length
asus-nb-wmi:
- add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv:
- Change verbosity control bits
dell-rbtn:
- Add a comment about the XPS 13 9350
dell-wmi, dell-laptop:
- depends DMI
dell-wmi:
- support Dell Inspiron M5110
- properly process Dell Instant Launch hotkey
- enable receiving WMI events on Dell Vostro V131
- Support new hotkeys on the XPS 13 9350 (Skylake)
- Clean up hotkey table size check
- Stop storing pointers to DMI tables
dell-laptop:
- move dell_smi_error() to dell-smbios
- use dell_smbios_find_token() instead of find_token_location()
- use dell_smbios_find_token() instead of find_token_id()
- extract SMBIOS-related code to a separate module
dell-smbios:
- rename dell_smi_error() to dell_smbios_error()
- make da_tokens static
- remove find_token_{id,location}()
- implement new function for finding DMI table 0xDA tokens
- make the SMBIOS buffer static
- return the SMBIOS buffer from dell_smbios_get_buffer()
- don't return an SMBIOS buffer from dell_smbios_send_request()
- don't pass an SMBIOS buffer to dell_smbios_send_request()
- rename dell_send_request() to dell_smbios_send_request()
- rename release_buffer() to dell_smbios_release_buffer()
- rename clear_buffer() to dell_smbios_clear_buffer()
- rename get_buffer() to dell_smbios_get_buffer()
dell-led:
- use dell_smbios_send_request() for performing SMBIOS calls
- use dell_smbios_find_token() for finding mic DMI tokens
toshiba_acpi:
- Add a module parameter to disable hotkeys registration
- Add sysfs entries for the Cooling Method feature
- Add support for cooling method feature
Documentation/ABI:
- Update sysfs-driver-toshiba_acpi file
thinkpad_acpi:
- Remove ambiguous logging for "Unsupported brightness interface"
alienware-wmi:
- whitespace improvements
- Add support for two new systems: ASM200 and ASM201.
- Add support for deep sleep control.
- Add initial support for alienware graphics amplifier.
- Add support for new platform: X51-R3
- Clean up whitespace for ASM100 platform"
* tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits)
hp-wmi: Remove GPS rfkill support via pre-2009 interface
hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
dell-wmi: support Dell Inspiron M5110
dell-wmi: properly process Dell Instant Launch hotkey
dell-wmi: enable receiving WMI events on Dell Vostro V131
dell-smbios: rename dell_smi_error() to dell_smbios_error()
dell-laptop: move dell_smi_error() to dell-smbios
ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
fujitsu-laptop: Support radio toggle button
intel-hid: allocate correct amount of memory for private struct
platform/x86: Make intel_scu_ipc explicitly non-modular
intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
intel_pmc_ipc: Fix GCR register base address and length
asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
intel_telemetry_pltdrv: Change verbosity control bits
dell-rbtn: Add a comment about the XPS 13 9350
dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
dell-wmi: Clean up hotkey table size check
dell-wmi, dell-laptop: depends DMI
dell-wmi: Stop storing pointers to DMI tables
...
GPS rfkill support via pre-2009 WMI interface uses hp_wmi_get_sw_state()
and hp_wmi_get_hw_state() to query its current hard and soft block state,
respectively.
In hp_wmi_get_sw_state() a mask is calculated which bit should be checked
in an int value returned by firmware to get current block state: 0x200 <<
(r * 8) which with r being 3 for GPS results in overflow and mask of zero.
The same goes for hp_wmi_get_hw_state().
This effectively means that GPS rfkill on this WMI interface is considered
always both hard and soft blocked.
Unfortunately, later when rfkill subsystem calls hp_wmi_set_block() to sync
this block to hardware firmware at least on my old nc6400 gets confused and
sets both hard and soft blocks on WiFi and BT.
This happens for example on hp-wmi module load.
Since due to overflow described above it is dubious that this ever worked
correctly and HP laptops with modems having GPS support seem to all have
been released well past year 2009 let's just remove GPS rfkill support via
pre-2009 WMI interface.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
rfkill registration order in hp_wmi_rfkill_setup() is:
1) WiFi,
2) BT,
3) WWAN,
5) GPS.
Unregistration when cleaning up on error return should happen in reverse
order.
This means that: If BT rfkill fails to be allocated we possibly need to
first unregister WiFi rfkill before destroying it.
The same goes with (WWAN, BT) and (GPS, WWAN) pairs.
Also, if WWAN rfkill fails to register we need to (possibly) unregister BT
not the GPS one. And if GPS rfkill fails to register we need to unregister
WWAN not the BT one.
We never need to unregister GPS rfkill here since if GPS rfkill
registration succeeds this function returns without error so no cleanup is
necessary.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Similarly to Dell Vostro V131, Dell Inspiron M5110 also requires an
SMBIOS request to be issued in order for WMI events to be generated and
does not raise an i8042 interrupt when the Dell Instant Launch hotkey is
pressed. However, the event code for that hotkey on this machine is
0xe029, so add it to the legacy keymap.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Darek Stojaczyk <darek.stojaczyk@gmail.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
On models on which an SMBIOS request needs to be issued in order for WMI
events to be generated, pressing the Dell Instant Launch hotkey does not
raise an i8042 interrupt - only a WMI event is generated (0xe025 on Dell
Vostro V131). As that WMI event is the only way the kernel will be
notified about pressing the Dell Instant Launch hotkey on such machines,
the relevant keymap entry has to be changed to a KE_KEY one. However,
the same WMI event should still be ignored on machines which do not
require an SMBIOS request for enabling WMI, so filter it conditionally
in dell_wmi_process_key().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
On some laptop models (e.g. Dell Vostro V131), WMI events are not
generated until a specific SMBIOS request is issued to register an event
listener [1]. As there seems to be no ACPI method or SMBIOS request to
determine without possible side effects whether a given machine needs to
issue this SMBIOS request in order to receive WMI events, DMI matching
is used to whitelist the models which need it.
[1] https://lists.us.dell.com/pipermail/libsmbios-devel/2015-July/000612.html
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell_smi_error() is exported by dell-smbios, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_error().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The dell_smi_error() method could be used by modules other than
dell-laptop for convenient translation of SMBIOS request errors into
errno values. Thus, move it to dell-smbios.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some Lenovo ideapad models lack a physical rfkill switch.
On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK,
ideapad-laptop would wrongly report all radios as blocked by
hardware which caused wireless network connections to fail.
Add these models without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: John Dahlstrom <jodarom@sdf.org>
Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dab: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
Cc: <stable@vger.kernel.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lifebook E734/E744/E754 has a radio toggle button which uses code 0x420.
Map it to KEY_RFKILL.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Kconfig currently controlling compilation of this code is:
drivers/platform/x86/Kconfig:config INTEL_SCU_IPC
drivers/platform/x86/Kconfig: bool "Intel SCU IPC Support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.
Since module_pci_driver() uses the same init level priority as
builtin_pci_driver() the init ordering remains unchanged with
this commit.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We don't replace module.h with init.h since the file already has that.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
During legacy suspend flow, IPC1 commands are being requested
from opregion driver. But the PMC_IPC1 command will timeout as example:
[ 281.444600] ipc_debug##: ipc_send_command: cmd=0x201ff,
[ 281.444648] wbuf[0]=0x4ea6
[ 281.444668] wbuf[1]=0x0
[ 281.444674] wbuf[2]=0x0
[ 281.444676] wbuf[3]=0x0
[ 284.446467] pmc-ipc-plat INT34D2:00: IPC timed out, TS=0x4, CMD=0x200ff
This is because before the opregion driver could send IPC1 commands,
the PMC_IPC irq is already suspended. Which makes the IPC command to
timeout.
Solution: register pmc_ipc irq as IRQF_NO_SUSPEND
Signed-off-by: Ananth Krishna R <ananth.krishna.r@intel.com>
Signed-off-by: Bharath K Veera <bharath.k.veera@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
GCR register (pmc_cfg register) is at offset 0x1008, and
remapping of 0x4 bytes is enough.
Signed-off-by: Francois-Nicolas Muller <francois-nicolas.muller@intel.com>
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Wi-Fi on ASUS X75VD laptop does not work unless asus_nb_wmi module
is loaded with wapf=4 option. Add quirk for this.
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Due to a recent fix in the firmware, the Punit verbosity control bits
now adhere to the correct pattern. Hence remove the workaround and
do a read-modify-write of the register.
Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
On the XPS 13 9350, the dell-rbtn mechanism has a new device id, and
the DSDT turns it off if a new enough _OSI is supported. Add a
comment about why we don't bother supporting it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The XPS 13 9350 sends WMI keypress events that aren't enumerated in
the DMI table. Add a table listing them. To avoid breaking things
that worked before, these un-enumerated hotkeys won't be used if the
DMI table maps them to something else.
FWIW, it appears that the DMI table may be a legacy thing and we
might want to rethink how we handle events in general. As an
example, a whole lot of things map to KEY_PROG3 via the DMI table.
This doesn't send keypress events for any of the new events. They
appear to all be handled by other means (keyboard illumination is
handled automatically and rfkill is handled by intel-hid).
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Checking the table for a minimum size of 7 bytes makes no sense: any valid
hotkey table has a size that's a multiple of 4.
Clean this up: replace the hardcoded header length with a sizeof and
change the check to ignore an empty hotkey table. The only behavior
change is that a 7-byte table (which is nonsensical) will now be
treated as absent instead of as valid but empty.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
dell-wmi and dell-laptop will compile but won't work right if DMI
isn't selected.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
[arnd: Use depends instead of selects to avoid recursive dependencies]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The dmi_walk function maps the DMI table, walks it, and unmaps it.
This means that the dell_bios_hotkey_table that find_hk_type stores
points to unmapped memory by the time it gets read.
I've been able to trigger crashes caused by the stale pointer a
couple of times, but never on a stock kernel.
Fix it by generating the keymap in the dmi_walk callback instead of
storing a pointer.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell-laptop has been changed to use dell_smbios_find_token() instead
of directly accessing members of the da_tokens table, the latter can be
marked static.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell-laptop has been changed to use dell_smbios_find_token() instead
of find_token_id() and find_token_location(), these functions can be
safely removed.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Replace all uses of find_token_location() with dell_smbios_find_token()
to avoid directly accessing the da_tokens table.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Replace all uses of find_token_id() with dell_smbios_find_token() to
avoid directly accessing the da_tokens table.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Ultimately, the da_tokens table should not be exported from dell-smbios.
Currently, in some cases, dell-laptop accesses that table's members
directly, so implement a new function, dell_smbios_find_token(), which
returns a pointer to an entry inside the da_tokens table with the given
token ID (or NULL if it is not found).
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell-laptop has been changed to always retrieve a pointer to the
SMBIOS buffer using dell_smbios_get_buffer(), the SMBIOS buffer can be
marked static.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Ultimately, the SMBIOS buffer should not be exported from dell-smbios.
Currently, dell-laptop accesses it directly using a global variable, so
make dell_smbios_get_buffer() return a pointer to the SMBIOS buffer and
replace all uses of the global variable with local variables.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
An SMBIOS buffer pointer does not need to be returned by
dell_smbios_send_request(), because SMBIOS call results are stored in
the buffer exported by the module.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Passing an SMBIOS buffer pointer to dell_smbios_send_request() is
redundant as it should always operate on the SMBIOS buffer exported from
the module.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As dell_send_request() is exported from the module, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_send_request().
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As release_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As clear_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As get_buffer() is exported from the module, it has to be renamed to
something less generic, so add a "dell_smbios_" prefix to the function
name.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Extract SMBIOS-related code from dell-laptop to a new kernel module,
dell-smbios. The static specifier is removed from exported symbols,
otherwise code is just moved around.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
[dvhart: Include linux/io.h in dell-smbios.c as caught by lkp]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some laptop models have working hotkeys without the need of the driver
to activate them.
This patch adds a module parameter to tell the driver not to register
the hotkeys.
The new parameter is useful in DE less installations or where the DE
does not handle the hotkeys (see bug 99501).
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds support to query and set the "Cooling Method" feature,
which basically changes how the system fan behaves, depending on the
supported cooling methods.
Depending on the laptop model, these are the (so far...) available
cooling methods:
- Maximum Performance
- Performance
- Battery Optimized
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
"Unsupported brightness interface" message gets logged on
machines that are well supported.
Signed-off-by: Eric Curtin <ericcurtin17@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Centralize gmux' ACPI HID in a header file and add apple_gmux_present().
This can be used by other drivers to activate quirks specific to dual
GPU MacBook Pros & Mac Pros. The alternative would be to hardcode DMI
or PCI IDs and amend them whenever Apple introduces a new machine.
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/89c23769058a340e5e11d4a7102f3793d3b0c94c.1452525860.git.lukas@wunner.de
gmux has 3 switch registers:
* GMUX_PORT_SWITCH_DISPLAY switches the panel
* GMUX_PORT_SWITCH_DDC switches the panel's DDC lines
(only on pre-retinas; on retinas this is a no-op)
* GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s)
(only on models without Thunderbolt, i.e. introduced before 2011;
those with Thunderbolt switch only HPD/AUX, not the main link)
Currently we switch all 3 registers in unison.
gmux does not preserve the switch state during suspend, so we currently
read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers
to this value on resume.
With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may
temporarily contain a different value than the other 2 registers.
If we happen to suspend at this moment, we'll write an incorrect
value to GMUX_PORT_SWITCH_DDC on resume.
Also, on models with Thunderbolt the integrated GPU is unable to drive
the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL
permanently switched to the discrete GPU on those machines.
Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY
represents the correct value for all 3 registers on suspend.
Track the state of all 3 registers: Add gmux_read_switch_state() and
gmux_write_switch_state(). Instead of reading the switch state on
every suspend, read it once on driver initialization so that we know
the current switch state all the time. (This allows us to use some
optimizations and shortcuts, e.g. we can skip switching DDC if we
know that it's already switched to the requested GPU.) Change the
->switchto callback to use gmux_write_switch_state().
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
Allow handlers to declare their capabilities and allow clients to
obtain that information. So far we have these use cases:
* If the handler is able to switch DDC separately, clients need to
probe EDID with drm_get_edid_switcheroo(). We should allow them
to detect a capable handler to ensure this function only gets
called when needed.
* Likewise if the handler is unable to switch AUX separately, the active
client needs to communicate link training parameters to the inactive
client, which may then skip the AUX handshake and set up its output
with these pre-calibrated values (DisplayPort specification v1.1a,
section 2.5.3.3). Clients need a way to recognize such a situation.
The flags for the radeon_atpx_handler and amdgpu_atpx_handler are
initially set to 0, this can later on be amended with
handler_flags |= VGA_SWITCHEROO_CAN_SWITCH_DDC;
when a ->switch_ddc callback is added.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/2b0d93ed6e511ca09e95e45e0b35627f330fabce.1452525860.git.lukas@wunner.de
These were some items that were pointed out in previous patches that
weren't caught be previous reviewers, but should be applied to other
parts of the driver as well.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
[dvhart: reverted a couple incorrect line wrapping changes]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Both of these systems support:
* 2 lighting control zones
* HDMI mux control
* deep sleep control (to enable wakup from controller)
The ASM201 also supports the external graphics amplifier.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Allow for user configuration of BIOS settings that allow the system to be
turned on via HID devices.
The feature requires hardware architectural modifications and can not be
supported on existing systems.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
[dvhart: comment formatting and line length fixes]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The alienware graphics amplifier is a device that provides external access
to a full PCIe slot, USB hub, and additional control zone.
This patch enables support for reading status whether the cable is plugged
in as well as for setting the colors in the new zone on the amplifier.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
[dvhart: minor comment formatting fixes]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The X51-R3 is in the X51 family. It includes 3 internal
lighting zones as well as is the first AW desktop that
includes support for a graphics amplifier.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This brings them more in line with the usage of whitespace
in other platforms.
Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
"count" is controlled by the user and it can be negative. Let's prevent
that by making it unsigned. You have to have CAP_SYS_RAWIO to call this
function so the bug is not as serious as it could be.
Fixes: 5369c02d95 ('intel_scu_ipc: Utility driver for intel scu ipc')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
intel_hid_keymap contains a duplicate entry for KEY_HOME and an
incorrect HID index for KEY_PAGEDOWN
Reported-by: Pavel Bludov <pbludov@gmail.com>
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Like the Yoga 900 models the Lenovo Yoga 700 does not have a
hw rfkill switch, and trying to read the hw rfkill switch through the
ideapad module causes it to always reported blocking breaking wifi.
This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing
the wifi breakage.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272
Tested-by: <dinyar.rabady+spam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch fixes compile time warnings when CONFIG_PM_SLEEP
is undefined. In this case sleep related counters are unused.
Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on
top of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates
of the ACPICA's copyright notices, a code fixup resulting from
a regression fix that was necessary in the upstream code only
(the regression fixed by it has never been present in Linux)
and a compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke
it on practically all architectures other than x86 and make a
couple of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether
or not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on
the problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up
a bit and update the MAINTAINERS information related to it
(Chanwoo Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas Prabhu).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=bKJ9
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI updates from Rafael Wysocki:
"This includes fixes on top of the previous batch of PM+ACPI updates
and some new material as well.
From the new material perspective the most significant are the driver
core changes that should allow USB devices to stay suspended over
system suspend/resume cycles if they have been runtime-suspended
already beforehand. Apart from that, ACPICA is updated to upstream
revision 20160108 (cosmetic mostly, but including one fixup on top of
the previous ACPICA update) and there are some devfreq updates the
didn't make it before (due to timing).
A few recent regressions are fixed, most importantly in the cpuidle
menu governor and in the ACPI backlight driver and some x86 platform
drivers depending on it.
Some more bugs are fixed and cleanups are made on top of that.
Specifics:
- Modify the driver core and the USB subsystem to allow USB devices
to stay suspended over system suspend/resume cycles if they have
been runtime-suspended already beforehand and fix some bugs on top
of these changes (Tomeu Vizoso, Rafael Wysocki).
- Update ACPICA to upstream revision 20160108, including updates of
the ACPICA's copyright notices, a code fixup resulting from a
regression fix that was necessary in the upstream code only (the
regression fixed by it has never been present in Linux) and a
compiler warning fix (Bob Moore, Lv Zheng).
- Fix a recent regression in the cpuidle menu governor that broke it
on practically all architectures other than x86 and make a couple
of optimizations on top of that fix (Rafael Wysocki).
- Clean up the selection of cpuidle governors depending on whether or
not the kernel is configured for tickless systems (Jean Delvare).
- Revert a recent commit that introduced a regression in the ACPI
backlight driver, address the problem it attempted to fix in a
different way and revert one more cosmetic change depending on the
problematic commit (Hans de Goede).
- Add two more ACPI backlight quirks (Hans de Goede).
- Fix a few minor problems in the core devfreq code, clean it up a
bit and update the MAINTAINERS information related to it (Chanwoo
Choi, MyungJoo Ham).
- Improve an error message in the ACPI fan driver (Andy Lutomirski).
- Fix a recent build regression in the cpupower tool (Shreyas
Prabhu)"
* tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
cpuidle: menu: Avoid pointless checks in menu_select()
sched / idle: Drop default_idle_call() fallback from call_cpuidle()
cpupower: Fix build error in cpufreq-info
cpuidle: Don't enable all governors by default
cpuidle: Default to ladder governor on ticking systems
time: nohz: Expose tick_nohz_enabled
ACPICA: Update version to 20160108
ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t'
ACPICA: Additional 2016 copyright changes
ACPICA: Reduce regression fix divergence from upstream ACPICA
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830
ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit
ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses()
ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses"
ACPI / fan: Improve acpi_device_update_power error message
ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700
cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0
MAINTAINERS: Add devfreq-event entry
MAINTAINERS: Add missing git repository and directory for devfreq
...
Add intel punit and telemetry driver for APL SoCs.
Add intel-hid driver for various laptop hotkey support.
Add asus-wireless radio control driver.
Keyboard backlight support/improvements for ThinkPads, Vaio, and Toshiba.
Several hotkey related fixes and improvements for dell and toshiba.
Fix oops on dual GPU Macs in apple-gmux.
A few new device IDs and quirks.
Various minor config related build issues and cleanups.
surface pro 4:
- fix compare_const_fl.cocci warnings
- Add support for Surface Pro 4 Buttons
platform/x86:
- Add Intel Telemetry Debugfs interfaces
- Add Intel telemetry platform device
- Add Intel telemetry platform driver
- Add Intel Telemetry Core Driver
- add NULL check for input parameters
- add Intel P-Unit mailbox IPC driver
- update acpi resource structure for Punit
thinkpad_acpi:
- Add support for keyboard backlight
dell-wmi:
- Process only one event on devices with interface version 0
- Check if Dell WMI descriptor structure is valid
- Improve unknown hotkey handling
- Use a C99-style array for bios_to_linux_keycode
tc1100-wmi:
- fix build warning when CONFIG_PM not enabled
asus-wireless:
- Add ACPI HID ATK4001
- Add Asus Wireless Radio Control driver
asus-wmi:
- drop to_platform_driver macro
intel-hid:
- new hid event driver for hotkeys
sony-laptop:
- Keyboard backlight control for some Vaio Fit models
ideapad-laptop:
- Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
apple-gmux:
- Assign apple_gmux_data before registering
toshiba_acpi:
- Add rfkill dependency to ACPI_TOSHIBA entry
- Fix keyboard backlight sysfs entries not being updated
- Add WWAN RFKill support
- Add support for WWAN devices
- Fix blank screen at boot if transflective backlight is supported
- Propagate the hotkey value via genetlink
toshiba_bluetooth:
- Add missing newline in toshiba_bluetooth_present function
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWnuSYAAoJEKbMaAwKp364xckH/A/INtwr1LzmSw8fsEIe6IGQ
MKEzCHZOUdSPcZSHcTW/fE/J8kt1j4YdR2kkxNbivtxST5O81E6KfAmo37TRrTNx
bunVt7Swj7FcPsm6t0m3PQkbWkOy3UMUncRaZjeofzhRl2m+bHEycEIJsHs7OU+e
7UPjbWZjRz6/LahcryKDH/lRhweMEsgZSFzjNlby8Wzz4LRCu8HLwNGUQa0vQfNI
2UW+s7g2ZkFXx9fbmWu9twkyP7LwNoaZ3IDGsEffIYjmXeZKe+yTPy/TueYYzpon
aclJSjhxLNnfWUaO0eUt/H4T5VyUag3v3mp6PVSwm2TA3Cpuh1SDYrJcurls6Mw=
=b4Wa
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Add intel punit and telemetry driver for APL SoCs.
Add intel-hid driver for various laptop hotkey support.
Add asus-wireless radio control driver.
Keyboard backlight support/improvements for ThinkPads, Vaio, and Toshiba.
Several hotkey related fixes and improvements for dell and toshiba.
Fix oops on dual GPU Macs in apple-gmux.
A few new device IDs and quirks.
Various minor config related build issues and cleanups.
surface pro 4:
- fix compare_const_fl.cocci warnings
- Add support for Surface Pro 4 Buttons
platform/x86:
- Add Intel Telemetry Debugfs interfaces
- Add Intel telemetry platform device
- Add Intel telemetry platform driver
- Add Intel Telemetry Core Driver
- add NULL check for input parameters
- add Intel P-Unit mailbox IPC driver
- update acpi resource structure for Punit
thinkpad_acpi:
- Add support for keyboard backlight
dell-wmi:
- Process only one event on devices with interface version 0
- Check if Dell WMI descriptor structure is valid
- Improve unknown hotkey handling
- Use a C99-style array for bios_to_linux_keycode
tc1100-wmi:
- fix build warning when CONFIG_PM not enabled
asus-wireless:
- Add ACPI HID ATK4001
- Add Asus Wireless Radio Control driver
asus-wmi:
- drop to_platform_driver macro
intel-hid:
- new hid event driver for hotkeys
sony-laptop:
- Keyboard backlight control for some Vaio Fit models
ideapad-laptop:
- Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
apple-gmux:
- Assign apple_gmux_data before registering
toshiba_acpi:
- Add rfkill dependency to ACPI_TOSHIBA entry
- Fix keyboard backlight sysfs entries not being updated
- Add WWAN RFKill support
- Add support for WWAN devices
- Fix blank screen at boot if transflective backlight is supported
- Propagate the hotkey value via genetlink
toshiba_bluetooth:
- Add missing newline in toshiba_bluetooth_present function"
* tag 'platform-drivers-x86-v4.5-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (29 commits)
surface pro 4: fix compare_const_fl.cocci warnings
surface pro 4: Add support for Surface Pro 4 Buttons
platform:x86: Add Intel Telemetry Debugfs interfaces
platform:x86: Add Intel telemetry platform device
platform:x86: Add Intel telemetry platform driver
platform/x86: Add Intel Telemetry Core Driver
intel_punit_ipc: add NULL check for input parameters
thinkpad_acpi: Add support for keyboard backlight
dell-wmi: Process only one event on devices with interface version 0
dell-wmi: Check if Dell WMI descriptor structure is valid
tc1100-wmi: fix build warning when CONFIG_PM not enabled
asus-wireless: Add ACPI HID ATK4001
platform/x86: Add Asus Wireless Radio Control driver
asus-wmi: drop to_platform_driver macro
intel-hid: new hid event driver for hotkeys
Keyboard backlight control for some Vaio Fit models
platform/x86: Add rfkill dependency to ACPI_TOSHIBA entry
platform:x86: add Intel P-Unit mailbox IPC driver
intel_pmc_ipc: update acpi resource structure for Punit
ideapad-laptop: Add Lenovo ideapad Y700-17ISK to no_hw_rfkill dmi list
...
Move constants to the right of binary operators.
Generated by: scripts/coccinelle/misc/compare_const_fl.cocci
CC: Weng Xuetian <wengxt@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Surface Pro 4 buttons are managed by a device with _HID "MSHW0040"
different from Surface Pro 3.
This commit adds MSHW0040 to id list to support the Surface Pro 4.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109871
Signed-off-by: Weng Xuetian <wengxt@gmail.com>
Acked-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This implements debugfs interfaces for reading the telemetry
samples from SSRAM and configuring firmware trace verbosity.
Interface created under /sys/kernel/debug/telemetry
soc_states: SoC Device and Low Power States
pss_info: Info from the Primary SubSystem
ioss_info: Info from IO SubSusytem
pss_trace_verbosity: Read/Modify PSS F/W trace verbosity
ioss_trace_verbosity: Read/Modify IOSS F/W trace verbosity.
Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Telemetry Device is created by the pmc_ipc driver. Resources
are populated according SSRAM region as indicated by the BIOS tables.
Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Telemetry platform driver implements the telemetry interfaces.
Currently it supports ApolloLake. It uses the PUNIT and PMC IPC
interfaces to configure the telemetry samples to read.
The samples are read from a Secure SRAM region.
Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Intel PM Telemetry is a software mechanism via which various SoC
PM and performance related parameters like PM counters, firmware
trace verbosity, the status of different devices inside the SoC, etc.
can be monitored and analyzed. The different samples that may be
monitored can be configured at runtime via exported APIs.
This patch adds the telemetry core driver that implements basic
exported APIs.
Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
intel_punit_ipc_command() maybe called when in or out
data pointers are NULL.
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds support for controlling keyboard backlight via standard
linux led class interface (::kbd_backlight). It uses ACPI HKEY device with
MLCG and MLCS methods.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Fabio D'Urso <fabiodurso@hotmail.it>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
BIOS/ACPI on devices with WMI interface version 0 does not clear buffer
before filling it. So next time when BIOS/ACPI send WMI event which is
smaller as previous then it contains garbage in buffer from previous event.
BIOS/ACPI on devices with WMI interface version 1 clears buffer and
sometimes send more events in buffer at one call.
Since commit 83fc44c32a ("dell-wmi: Update code for processing WMI
events") dell-wmi process all events in buffer (and not just first).
To prevent reading garbage from the buffer we process only the first
event on devices with WMI interface version 0.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
After examining existing DSDT ACPI tables of more laptops and looking
into Dell WMI document mentioned in ML dicussion archived at
http://www.spinics.net/lists/platform-driver-x86/msg07220.html we will
parse and check WMI descriptor if contains expected data. It is because
WMI descriptor contains interface version number and it is needed to
know in next commit.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Conditionally declare suspend_data on CONFIG_PM to avoid
the following warning when CONFIG_OM is not enabled:
drivers/platform/x86/tc1100-wmi.c:55:27: warning:
'suspend_data' defined but not used [-Wunused-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As reported in https://bugzilla.kernel.org/show_bug.cgi?id=98931#c22 in
the Asus UX31A the Asus Wireless Radio Control device (ASHS) uses the
HID "ATK4001".
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reported-by: Tasev Nikola <tasev.stefanoska@skynet.be>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Some Asus notebooks like the Asus E202SA and the Asus X555UB have a
separate ACPI device for notifications from the airplane mode hotkey.
This device is called "Wireless Radio Control" in Asus websites and ASHS
in the DSDT, and its ACPI _HID is ATK4002 in the two models mentioned
above.
For these models, when the airplane mode hotkey (Fn+F2) is pressed, a
query 0x0B is started in the Embedded Controller, and all this query does
is a notify ASHS with the value 0x88 (for acpi_osi >= "Windows 2012"):
Scope (_SB.PCI0.SBRG.EC0)
{
(...)
Method (_Q0B, 0, NotSerialized) // _Qxx: EC Query
{
If ((MSOS () >= OSW8))
{
Notify (ASHS, 0x88) // Device-Specific
}
Else
{
(...)
}
}
}
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
to_platform_driver has been defined in platform_device.h, so drop
this repetitive macro in asus-wmi.c.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This driver supports various HID events including hotkeys.
Dell XPS 13 9350 requires it for the wireless hotkey.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Reviewed-and-tested-by: Andy Lutomirski <luto@kernel.org>
[dvhart: Kconfig help typo fix and INPUT_SPARSEKMAP fix from Sedat Dilek]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
SVF1521P6EW, SVF1521DCXW, SVF13N1L2ES and likely most SVF*.
do not expose separate timeout controls in auto mode.
Signed-off-by: Dominik Matta <dominik@matta.sk>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit 2fdde83443 ("toshiba_acpi: Add WWAN RFKill support") added
WWAN rfkill support to the driver, but the KConfig entry was not
updated to add the RFKill dependency, causing a broken build if
RFKill is not selected.
This patch adds the RFKILL dependency to the KConfig entry, fixing
the build issue.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This driver provides support for P-Unit mailbox IPC on Intel platforms.
The heart of the P-Unit is the Foxton microcontroller and its firmware,
which provide mailbox interface for power management usage.
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
BIOS restructure exported memory resources for Punit
in acpi table, So update resources for Punit.
Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
One of the newest ideapad models also lacks a physical hw rfkill switch,
and trying to read the hw rfkill switch through the ideapad module
causes it to always reported blocking breaking wifi.
Fix it by adding this model to the DMI list.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1286293
Cc: stable@vger.kernel.org
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
If DMI lists a hotkey that we don't recognize, log and ignore it
instead of trying to map it to keycode 0. I haven't seen this happen,
but it will help maintain the key map in the future and it will help
avoid sending bogus events.
This also improves the message that we log when we get an unknown key
event.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
[dvhart: remove BUILD_BUG_ON per mutual agreement on list]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Registering the handler after both GPUs will trigger a DDC switch for
connector reprobing. This will oops if apple_gmux_data hasn't already
been assigned. Reorder the code to do that.
[Lukas: More generally, this commit fixes a race condition that
is triggered by invoking a handler callback between the call to
vga_switcheroo_register_handler() and the assignment of
apple_gmux_data.]
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
[MBP 5,3 2009 nvidia MCP79 + G96 pre-retina 15"]
Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
[MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina 15"]
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"]
Tested-by: William Brown <william@blackhats.net.au>
[MBP 8,2 2011 intel SNB + amd turks pre-retina 15"]
Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
[MBP 11,3 2013 intel HSW + nvidia GK107 retina 15"]
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Certain Toshiba models with the second generation keyboard backlight
(type 2) do not generate the keyboard backlight changed event (0x92),
and thus, the sysfs entries are never being updated.
This patch adds a workquee and a global boolean variable to address
the issue.
For those models that do generate the event, the sysfs entries are
being updated via the *notify function and the boolean is set to
true to avoid a second call to update the entries.
For those models that do not generate the event, the workquee is
used to update the sysfs entries and also to emulate the event via
netlink, to make userspace aware of such change.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.5. I don't think I've missed
anything too major, I'm mostly back at work now but I'll probably get
some sleep in 5 years time.
Summary:
New drivers:
- etnaviv:
GPU driver for the 3D core on the Vivante core used in numerous
ARM boards.
Highlights:
Core:
- Atomic suspend/resume helpers
- Move the headers to using userspace friendlier types.
- Documentation updates
- Lots of struct_mutex removal.
- Bunch of DP MST fixes from AMD.
Panel:
- More DSI helpers
- Support for some new basic panels
i915:
- Basic Kabylake support
- DP link training and detect code refactoring
- fbc/psr fixes
- FIFO underrun fixes
- SDE interrupt handling fixes
- dma-buf/fence support in pageflip path.
- GPU side for MST audio support
radeon/amdgpu:
- Drop UMS support
- GPUVM/Scheduler optimisations
- Initial Powerplay support for Tonga/Fiji/CZ/ST
- ACP audio prerequisites
nouveau:
- GK20a instmem improvements
- PCIE link speed change support
msm:
- DSI support for msm8960/apq8064
tegra:
- Host1X support for Tegra210 SoC
vc4:
- 3D acceleration support
armada:
- Get rid of struct mutex
tda998x:
- Atomic modesetting support
- TMDS clock limitations
omapdrm:
- Atomic modesetting support
- improved TILER performance
rockchip:
- RK3036 VOP support
- Atomic modesetting support
- Synopsys DW MIPI DSI support
exynos:
- Runtime PM support
- of_graph binding for DP panels
- Cleanup of IPP code
- Configurable plane support
- Kernel panic fixes at release time"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
drm/fb_cma_helper: Remove implicit call to disable_unused_functions
drm/amdgpu: add missing irq.h include
drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
drm/vmwgfx: Fix an incorrect lock check
drm: nouveau: fix nouveau_debugfs_init prototype
drm/nouveau/pci: fix check in nvkm_pcie_set_link
drm/amdgpu: validate duplicates first
drm/amdgpu: move VM page tables to the LRU end on CS v2
drm/ttm: add ttm_bo_move_to_lru_tail function v2
drm/ttm: fix adding foreign BOs to the swap LRU
drm/ttm: fix adding foreign BOs to the LRU during init v2
drm/radeon: use kobj_to_dev()
drm/amdgpu: use kobj_to_dev()
drm/amdgpu/cz: force vce clocks when sclks are forced
drm/amdgpu/cz: force uvd clocks when sclks are forced
drm/amdgpu/cz: add code to enable forcing VCE clocks
drm/amdgpu/cz: add code to enable forcing UVD clocks
drm/amdgpu: fix lost sync_to if scheduler is enabled.
drm/amd/powerplay: fix static checker warning for return meaningless value.
drm/sysfs: use kobj_to_dev()
...
Infrastructural changes:
- In struct gpio_chip, rename the .dev node to .parent to better reflect
the fact that this is not the GPIO struct device abstraction. We will
add that soon so this would be totallt confusing.
- It was noted that the driver .get_value() callbacks was
sometimes reporting negative -ERR values to the gpiolib core, expecting
them to be propagated to consumer gpiod_get_value() and gpio_get_value()
calls. This was not happening, so as there was a mess of drivers
returning negative errors and some returning "anything else than zero"
to indicate that a line was active. As some would have bit 31 set to
indicate "line active" it clashed with negative error codes. This is
fixed by the largeish series clamping values in all drivers with
!!value to [0,1] and then augmenting the code to propagate error codes
to consumers. (Includes some ACKed patches in other subsystems.)
- Add a void *data pointer to struct gpio_chip. The container_of() design
pattern is indeed very nice, but we want to reform the struct gpio_chip
to be a non-volative, stateless business, and keep states internal to
the gpiolib to be able to hold on to the state when adding a proper
userspace ABI (character device) further down the road. To achieve this,
drivers need a handle at the internal state that is not dependent on
their struct gpio_chip() so we add gpiochip_add_data() and
gpiochip_get_data() following the pattern of many other subsystems.
All the "use gpiochip data pointer" patches transforms drivers to this
scheme.
- The Generic GPIO chip header has been merged into the general
<linux/gpio/driver.h> header, and the custom header for that removed.
Instead of having a separate mm_gpio_chip struct for these generic
drivers, merge that into struct gpio_chip, simplifying the code and
removing the need for separate and confusing includes.
Misc improvements:
- Stabilize the way GPIOs are looked up from the ACPI legacy
specification.
- Incremental driver features for PXA, PCA953X, Lantiq (patches from the
OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
New drivers:
- Add a GPIO chip to the ALSA SoC AC97 driver.
- Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but
the branch is merged here too to account for infrastructural changes).
- The sx150x driver now supports the sx1502.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=63rR
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"Here is the bulk of GPIO changes for v4.5.
Notably there are big refactorings mostly by myself, aimed at getting
the gpio_chip into a shape that makes me believe I can proceed to
preserve state for a proper userspace ABI (character device) that has
already been proposed once, but resulted in the feedback that I need
to go back and restructure stuff. So I've been restructuring stuff.
On the way I ran into brokenness (return code from the get_value()
callback) and had to fix it. Also, refactored generic GPIO to be
simpler.
Some of that is still waiting to trickle down from the subsystems all
over the kernel that provide random gpio_chips, I've touched every
single GPIO driver in the kernel now, oh man I didn't know I was
responsible for so much...
Apart from that we're churning along as usual.
I took some effort to test and retest so it should merge nicely and we
shook out a couple of bugs in -next.
Infrastructural changes:
- In struct gpio_chip, rename the .dev node to .parent to better
reflect the fact that this is not the GPIO struct device
abstraction. We will add that soon so this would be totallt
confusing.
- It was noted that the driver .get_value() callbacks was sometimes
reporting negative -ERR values to the gpiolib core, expecting them
to be propagated to consumer gpiod_get_value() and gpio_get_value()
calls. This was not happening, so as there was a mess of drivers
returning negative errors and some returning "anything else than
zero" to indicate that a line was active. As some would have bit
31 set to indicate "line active" it clashed with negative error
codes. This is fixed by the largeish series clamping values in all
drivers with !!value to [0,1] and then augmenting the code to
propagate error codes to consumers. (Includes some ACKed patches
in other subsystems.)
- Add a void *data pointer to struct gpio_chip. The container_of()
design pattern is indeed very nice, but we want to reform the
struct gpio_chip to be a non-volative, stateless business, and keep
states internal to the gpiolib to be able to hold on to the state
when adding a proper userspace ABI (character device) further down
the road. To achieve this, drivers need a handle at the internal
state that is not dependent on their struct gpio_chip() so we add
gpiochip_add_data() and gpiochip_get_data() following the pattern
of many other subsystems. All the "use gpiochip data pointer"
patches transforms drivers to this scheme.
- The Generic GPIO chip header has been merged into the general
<linux/gpio/driver.h> header, and the custom header for that
removed. Instead of having a separate mm_gpio_chip struct for
these generic drivers, merge that into struct gpio_chip,
simplifying the code and removing the need for separate and
confusing includes.
Misc improvements:
- Stabilize the way GPIOs are looked up from the ACPI legacy
specification.
- Incremental driver features for PXA, PCA953X, Lantiq (patches from
the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48
New drivers:
- Add a GPIO chip to the ALSA SoC AC97 driver.
- Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir,
but the branch is merged here too to account for infrastructural
changes).
- The sx150x driver now supports the sx1502"
* tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits)
gpio: generic: make bgpio_pdata always visible
gpiolib: fix chip order in gpio list
gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs()
gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs()
gpio: brcmstb: Allow building driver for BMIPS_GENERIC
gpio: brcmstb: Set endian flags for big-endian MIPS
gpio: moxart: fix build regression
gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs()
leds: pca9532: use gpiochip data pointer
leds: tca6507: use gpiochip data pointer
hid: cp2112: use gpiochip data pointer
bcma: gpio: use gpiochip data pointer
avr32: gpio: use gpiochip data pointer
video: fbdev: via: use gpiochip data pointer
gpio: pch: Optimize pch_gpio_get()
Revert "pinctrl: lantiq: Implement gpio_chip.to_irq"
pinctrl: nsp-gpio: use gpiochip data pointer
pinctrl: vt8500-wmt: use gpiochip data pointer
pinctrl: exynos5440: use gpiochip data pointer
pinctrl: at91-pio4: use gpiochip data pointer
...
acpi_video_handles_brightness_key_presses()'s may return false if the i915
driver is not loaded yet when thinkpad_acpi loads, and then return true
after the i915 driver has loaded. This means that thinkpad_acpi cannot
use it as is since thinkpad_acpi caches the return value.
This reverts commit 7714687a2b ("thinkpad_acpi: Use
acpi_video_handles_brightness_key_presses()").
Fixes: 7714687a2b "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()"
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Document what I've learned so far about the gmux so that we can
collaboratively reverse-engineer its remaining unknown bits
without everyone having to start from scratch.
The DOC sections are bound together in the gpu.tmpl DocBook
under a new vga_switcheroo "Handlers" chapter. Eventually
this should be amended with documentation about the four other
handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM,
radeon ATPX, amdgpu ATPX).
Requires kernel-doc with asciidoc support.
The EFI variable was reverse-engineered by Bruno Bierbaumer
<bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>.
Some of the remaining open questions:
* How are vblank intervals synchronized on retinas to achieve seamless
switching? Is the DP mux capable of this? It's not mentioned in the
data sheets. Or is it done at the OS level, i.e. do we have to
synchronize vblank intervals between DRM drivers? There's a signal
coming from the panel connector and going into gmux, could this be
the vblank signal as received by the panel to properly time the
switch?
* On retinas there's an I2C bus between gmux and the connector of the
right I/O board, apparently leading to the Parade PS8401A HDMI
repeater. What is this for, is it controlled via gmux registers?
Data sheet:
http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/
* On retinas there's an I2C bus between gmux and the LED driver.
Pre-retinas connected the LED driver to SMBUS. Are there additional
gmux registers on retinas to control it?
* The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the
retina MacBook Pro. The Mac Pro doesn't have a built-in display,
so what is its purpose? Power control of the dual FirePro GPUs?
Switching of the external DP/Thunderbolt ports? The iFixit teardown
clearly shows one TI HD3SS212 DisplayPort mux on the logic board next
to one of the three Thunderbolt controllers. However six muxes would
be necessary to switch all six ports between GPUs. The mux is probably
necessary for one of the display configurations allowed by Apple,
but which one?
https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.hugehttps://support.apple.com/en-us/HT202801
* Registers we haven't decoded yet:
0x700 32 Bit configmap?
0x708 32 Bit power sequence?
0x712 8 Bit status of clock from panel on retinas?
0x713 8 Bit dito?
0x724 16 Bit backlight, raw value?
0x760 32 Bit backlight
0x764 32 Bit backlight
0x768 8 Bit backlight
0x76a 16 Bit backlight
0x76c 16 Bit backlight
0x76e 16 Bit backlight
0x77f edp/dp/hdmi probe? retina only.
* Addition by Bruno Prémont <bonbons@linux-vserver.org>:
"Missing is also precise knowledge as to what the gmux depends on.
From behavioral reports, it is somehow sensitive to VGA IO/MEM
routing (it apparently needs the routing to go to integrated GPU,
not discrete GPU).
When the routing is inappropriate backlight control IO just reads back
as 0xFF (and eventually gmux IO in general does so)."
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use the new acpi_video_handles_brightness_key_presses function to check
if we should report brightness key-presses.
This makes the code both easier to read and makes it properly report
key-presses when acpi-video is not reporting them for reasons other
then the backlight type being vendor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the new acpi_video_handles_brightness_key_presses function to check
if we should report brightness key-presses.
This makes the code both easier to read and makes it properly report
key-presses when acpi-video is not reporting them for reasons other
then the backlight type being vendor.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A previuos patch added WWAN support to the driver, allowing to query
and set the device status.
This patch adds RFKill support for the recently introduced WWAN device,
making use of the WWAN and *wireless_status functions to query the
killswitch and (de)activate the device accordingly to its status.
Signed-off-by: Fabian Koester <fabian.koester@bringnow.com>
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Toshiba laptops with WWAN devices installed cannot use the device unless
it is attached and powered, similar to how Toshiba Bluetooth devices
work.
This patch adds support to WWAN devices, introducing three functions,
one to query the overall status of the wireless devices (RFKill, WLAN,
BT, WWAN), the second queries WWAN support, and finally the third
(de)activates the device.
Signed-off-by: Fabian Koester <fabian.koester@bringnow.com>
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>ZZ
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
If transflective backlight is supported and the brightness is zero
(lowest brightness level), the set_lcd_brightness function will activate
the transflective backlight, making the LCD appear to be turned off.
This patch fixes the issue by incrementing the brightness level, and
by doing so, avoiding the activation of the tranflective backlight.
Cc: <stable@vger.kernel.org> # 4.3+
Reported-and-tested-by: Fabian Koester <fabian.koester@bringnow.com>
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The driver uses genetlink to inform userspace of events generated by
the system, but the data passed is always zero as there is no data to
pass, except for the hotkey event.
This patch propagates the hotkey value via genetlink so userspace can
make use of it.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
It's currently hard to follow what maps to what, and it's hard to edit
the array. Redo it as a C99-style array.
I generated this using emacs regexes and a python one-liner.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply adds a missing newline in the error string printed
by the toshiba_bluetooth_present function.
This is just a cosmetic change, no functionality was changed.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.
This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:
@@
struct gpio_chip *var;
@@
-var->dev
+var->parent
and:
@@
struct gpio_chip var;
@@
-var.dev
+var.parent
and:
@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent
Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.
This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Support for the unfortunately rather unique ESC key on the Ideapad Yoga 3 and
two DMI matches for rfkill support. Solitary fix for potential missed errors for
asus-wmi. Downgrade a thinkpad_acpi message to info.
asus-wmi:
- fix error handling in store_sys_wmi()
ideapad-laptop:
- Add Lenovo Yoga 900 to no_hw_rfkill dmi list
- include Yoga 3 1170 in add rfkill whitelist
- add support for Yoga 3 ESC key
thinkpad_acpi:
- Don't yell on unsupported brightness interfaces
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWRlcDAAoJEKbMaAwKp364OAoH/0negZF4jX/rtPm7mhCLv1sJ
ojzT1JAANQCC/FQjOV7jo4uuvqb3aPbFi7n4Jgk1YTD1TIhRuhx5on9VDkkRW4vI
/CmEgZc8BKNWFG7VTC5zbrddeqxLDVj8jPkRqxMmqcl6v9aQRmhkZeK2HEjTcF5W
EKPS4BgOHM6YNDEoBZ2Ix6jmJn96fWKPrZJxj8K7jWzXhvMmh75RZ8Wk1MZAmzs7
CSjNJInmnTEJrVjjCoMp7VlXoTakbIwtsarA+hDzqorhnYK+0bpPT69oHGXgQaA6
KJk5aY/o8Xnzez93xC61TN1aCBXg7BLsUtygsQpsd1nJfwoepYswGgKgeT7Ai/8=
=K579
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.4-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull another x86 platform driver update from Darren Hart:
"Support for the unfortunately rather unique ESC key on the Ideapad
Yoga 3 and two DMI matches for rfkill support. Solitary fix for
potential missed errors for asus-wmi. Downgrade a thinkpad_acpi
message to info.
asus-wmi:
- fix error handling in store_sys_wmi()
ideapad-laptop:
- Add Lenovo Yoga 900 to no_hw_rfkill dmi list
- include Yoga 3 1170 in add rfkill whitelist
- add support for Yoga 3 ESC key
thinkpad_acpi:
- Don't yell on unsupported brightness interfaces"
* tag 'platform-drivers-x86-v4.4-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
asus-wmi: fix error handling in store_sys_wmi()
ideapad-laptop: Add Lenovo Yoga 900 to no_hw_rfkill dmi list
ideapad-laptop: include Yoga 3 1170 in add rfkill whitelist
ideapad-laptop: add support for Yoga 3 ESC key
thinkpad_acpi: Don't yell on unsupported brightness interfaces
Pull thermal updates from Zhang Rui:
- Implement generic devfreq cooling mechanism through frequency
reduction for devices using devfreq. From Ørjan Eide and Javi
Merino.
- Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack
and Eduardo Valentin.
- A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and
Rockchip thermal drivers.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits)
thermal: exynos: Directly return 0 instead of using local ret variable
thermal: exynos: Remove unneeded semicolon
thermal: exynos: Use IS_ERR() because regulator cannot be NULL
thermal: exynos: Fix first temperature read after registering sensor
thermal: exynos: Fix unbalanced regulator disable on probe failure
devfreq_cooling: return on allocation failure
thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r
dt-bindings: rockchip-thermal: Add the pinctrl states in this document
thermal: devfreq_cooling: Make power a u64
thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister
thermal: underflow bug in imx_set_trip_temp()
thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula
thermal: imx: register irq handler later in probe
thermal: rockhip: fix setting thermal shutdown polarity
thermal: rockchip: fix handling of invalid readings
devfreq_cooling: add trace information
thermal: Add devfreq cooling
PM / OPP: get the voltage for all OPPs
tools/thermal: tmon: use pkg-config also for CFLAGS
linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS
...
The asus_wmi_get_devstate_simple() returns 0-1 on success. In theory
according to static checkers, it can return either -EIO or -ENODEV on
failure. Currently the error handling code only handles -ENODEV and
-EIO is treated as success. Let's make it handle the -EIO error as
well.
It's possible that it can't actually return -EIO and this patch is not
needed but in that case this patch is harmless and silences a static
checker warning so it's still worth it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull drm updates from Dave Airlie:
"I Was Almost Tempted To Capitalise Every Word, but then I decided I
couldn't read it myself!
I've also got one pull request for the sti driver outstanding. It
relied on a commit in Greg's tree and I didn't find out in time, that
commit is in your tree now so I might send that along once this is
merged.
I also had the accidental misfortune to have access to a Skylake on my
desk for a few days, and I've had to encourage Intel to try harder,
which seems to be happening now.
Here is the main drm-next pull request for 4.4.
Highlights:
New driver:
vc4 driver for the Rasberry Pi VPU.
(From Eric Anholt at Broadcom.)
Core:
Atomic fbdev support
Atomic helpers for runtime pm
dp/aux i2c STATUS_UPDATE handling
struct_mutex usage cleanups.
Generic of probing support.
Documentation:
Kerneldoc for VGA switcheroo code.
Rename to gpu instead of drm to reflect scope.
i915:
Skylake GuC firmware fixes
HPD A support
VBT backlight fallbacks
Fastboot by default for some systems
FBC work
BXT/SKL workarounds
Skylake deeper sleep state fixes
amdgpu:
Enable GPU scheduler by default
New atombios opcodes
GPUVM debugging options
Stoney support.
Fencing cleanups.
radeon:
More efficient CS checking
nouveau:
gk20a instance memory handling improvements.
Improved PGOB detection and GK107 support
Kepler GDDR5 PLL statbility improvement
G8x/GT2xx reclock improvements
new userspace API compatiblity fixes.
virtio-gpu:
Add 3D support - qemu 2.5 has it merged for it's gtk backend.
msm:
Initial msm88896 (snapdragon 8200)
exynos:
HDMI cleanups
Enable mixer driver byt default
Add DECON-TV support
vmwgfx:
Move to using memremap + fixes.
rcar-du:
Add support for R8A7793/4 DU
armada:
Remove support for non-component mode
Improved plane handling
Power savings while in DPMS off.
tda998x:
Remove unused slave encoder support
Use more HDMI helpers
Fix EDID read handling
dwhdmi:
Interlace video mode support for ipu-v3/dw_hdmi
Hotplug state fixes
Audio driver integration
imx:
More color formats support.
tegra:
Minor fixes/improvements"
[ Merge fixup: remove unused variable 'dev' that had all uses removed in
commit 4e270f088011: "drm/gem: Drop struct_mutex requirement from
drm_gem_mmap_obj" ]
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/i915: Fix locking around GuC firmware load
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
...
Like some of the other Yoga models the Lenovo Yoga 900 does not have a
hw rfkill switch, and trying to read the hw rfkill switch through the
ideapad module causes it to always reported blocking breaking wifi.
This commit adds the Lenovo Yoga 900 to the no_hw_rfkill dmi list, fixing
the wifi breakage.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1275490
Cc: stable@vger.kernel.org
Reported-and-tested-by: Kevin Fenzi <kevin@scrye.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This changes the entry to the whitelist of machines that do not have
a physical rfkill switch. Unfortunately, the Yoga 3 generation seems
to use upper-case letters for the YOGA 3 Pro-1370, while it uses normal
capitalization for its Yoga 3 1170 and 1470 siblings.
In order to catch all variants of the Yoga 3, I'm changing both
the entry for the 1470 (using "Yoga" as the name) and the entry for
the Pro 1370 (using all-caps "YOGA") to not match the exact model number
but only the generation. This way, the 1170 and 1470 models share one
entry, but if the firmware changes from one format to the other, it will
still work.
The second entry for Yoga 2 Pro that was recently added for some
reason ended up not being added in alphanumeric order, and I'm
moving the Yoga 3 1470 entry down while making the change, so they
are sorted more logically.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The ideapad-laptop handles most special keys on various Lenovo Laptops
including the Yoga line. Unfortunately, the Yoga 3 11/13/14 models have
one important exception, which is the Fn-ESC combination.
On other Lenovo Laptops, this is FnLock, which switches the function keys
between the primary (Mute, Vol down, Vol up, ...) and the secondary (F1,
F2, F3, ...) behavior. On the new machines, FnLock is only available
through BIOS setup (possibly through a yet-to-be-implemented feature
in this driver) but not through Fn-ESC, but instead the ESC key itself
switched between ESC and a "Paper Display" app for Windows.
Unfortunately, that means that you can never have both ESC *and* the
function keys working at the same time without needing to press Fn on
one of them.
As pointed out in the official Lenovo Forum by dozens of users, this
makes the machine rather useless for any serious work [1].
I have now studied the ACPI DSDT one more time and found the event
that is generated for the ESC key. Unlike all other key events on this
machine, it is actually a WMI, while the other ones are read from the
embedded controller.
I am now installing a WMI notifier that uses the event number from the
WMI subsystem as the scancode. The only event number generated here is
'128', and that fits in nicely with the two existing ranges of scancodes
used by the EC: 0-15 for the 16-bit VPCCMD_R_VPC register, 16-17 for
the VPCCMD_R_NOVO register and 64-67 for VPCCMD_R_SPECIAL_BUTTONS.
The only sane way to handle this button (in absence of the Windows Paper
Display driver) seems to be to have it emit KEY_ESC, so that is what
I use as the default. Should any user ever want to overwrite the default,
they can install their own keymap.
To ensure that we can still build the driver without adding a CONFIG_WMI
dependency, all new code is enclosed in #ifdef.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[1] https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/YOGA-3-14-How-to-reclaim-my-Esc-key-and-permanently-disable/td-p/2070816
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The asm-generic changes for 4.4 are mostly a series from Christoph Hellwig
to clean up various abuses of headers in there. The patch to rename the
io-64-nonatomic-*.h headers caused some conflicts with new users, so I
added a workaround that we can remove in the next merge window.
The only other patch is a warning fix from Marek Vasut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dQKG
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"The asm-generic changes for 4.4 are mostly a series from Christoph
Hellwig to clean up various abuses of headers in there. The patch to
rename the io-64-nonatomic-*.h headers caused some conflicts with new
users, so I added a workaround that we can remove in the next merge
window.
The only other patch is a warning fix from Marek Vasut"
* tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: temporarily add back asm-generic/io-64-nonatomic*.h
asm-generic: cmpxchg: avoid warnings from macro-ized cmpxchg() implementations
gpio-mxc: stop including <asm-generic/bug>
n_tracesink: stop including <asm-generic/bug>
n_tracerouter: stop including <asm-generic/bug>
mlx5: stop including <asm-generic/kmap_types.h>
hifn_795x: stop including <asm-generic/kmap_types.h>
drbd: stop including <asm-generic/kmap_types.h>
move count_zeroes.h out of asm-generic
move io-64-nonatomic*.h out of asm-generic
The thinkpad_acpi driver currently emits error messages on unsupported
brightness interfaces, giving the impression that someone will implement
those. However, this error is spit out on nearly every thinkpad in
production since 2 years now. Furthermore, the backlight interfaces on
those devices are supported by the i915 driver just fine.
Downgrade the error message to a normal pr_info() and stop telling people
to report it to IBM.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit 53147b6cab ("toshiba_acpi: Fix
hotkeys registration on some toshiba models") fixed an issue on some
laptops regarding hotkeys registration, however, if failed to address
the initialization of the hotkey_event_type variable, and thus, it can
lead to potential unwanted effects as the variable is being checked.
This patch initializes such variable to avoid such unwanted effects.
Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch solves:
on x86_64:
when CONFIG_ACPI is not enabled:
../drivers/mfd/intel_soc_pmic_bxtwc.c: In function 'bxtwc_probe':
../drivers/mfd/intel_soc_pmic_bxtwc.c:342:2:
error: implicit declaration of function 'acpi_evaluate_integer' [-Werror=implicit-function-declaration]
status = acpi_evaluate_integer(handle, "_HRV", NULL, &hrv);
^
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Protect the dev member assignment in ->remove() since user may potentially call
unbind from a sysfs even if the driver is built-in. The latter might be racy
with ongoing SCU communication.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Eliminate some boilerplate code by using module_pci_driver() instead of
init/exit, moving the salient bits from init into probe.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Switch the code to use struct device * instead of struct pci_dev * since there
is no reason to access PCI related features in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
As much as possible propagate a pointer to struct intel_scu_ipc_dev.
There is no functional change.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The error handling is broken right now since it leaves resources unfreed.
Convert the code to use managed resources to fix the error handling.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
These are not implementations of default architecture code but helpers
for drivers. Move them to the place they belong to.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The macros KELVIN_TO_CELSIUS and CELSIUS_TO_KELVIN actually convert
between deciKelvins and Celsius, so rename them to reflect that. While
at it, use a statement expression in DECI_KELVIN_TO_CELSIUS to prevent
expanding the argument multiple times and get rid of a few casts.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Since v3.0 kernel, acer-wmi driver auto detects internal 3G device and
provides the threeg rfkill interface. So the sysfs interface of 3G is
no longer necessary now.
The 7b8aca65 patch added kernel information log to remind to user space
for the threeg sysfs interface will be removed in 2012, then b58b9ffc patch
updated the interface removing time to 2014.
I think the 3 years lead time is enough for user space application to use
rfkill instead of sysfs interface to control 3G device.
This patch removes code about threeg sysfs interface. And it also removes the
unused interface sysfs that exposes which ACPI-WMI method used by acer-wmi
driver on the machine. The information is already exposed by the acer-wmi
initial log.
Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Toshiba laptops that feature WMI events for hotkeys were left unsupported
by the toshiba_acpi driver, however, commit a88bc06e5a ("toshiba_acpi:
Avoid registering input device on WMI event laptops") added hardware
support for such laptops, but the hotkeys are not handled there.
This driver adds support for hotkey monitoring on certain Toshiba laptops
that manage the hotkeys via WMI events instead of the Toshiba
Configuration Interface (TCI).
The toshiba_acpi driver and this one can co-exist, as this only takes
care of hotkeys, while the proper takes care of hardware related stuff.
Currently the driver is under the EXPERIMENTAL flag, as the keymap
and the notify function are incomplete (due to lack of hardware to test).
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
sony_nv_hotkeys_decode can return a negative value. real_ev is a u32 variable.
The check for real_ev > 0 is incorrect.
Use an intermediate ret variable.
The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1].
[1]: http://permalink.gmane.org/gmane.linux.kernel/2046107
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
[dvhart: clarify commit msg, drop superfluous else block]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The IRQF_NO_SUSPEND flag is used to identify the interrupts that should
be left enabled so as to allow them to work as expected during the
suspend-resume cycle, but doesn't guarantee that it will wake the system
from a suspended state, enable_irq_wake is recommended to be used for
the wakeup.
This patch removes the use of IRQF_NO_SUSPEND flags and uses newly
introduce PM wakeup APIs dev_pm_{set,clear}_wake_irq.
Cc: Darren Hart <dvhart@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Add charge control limit to the power supply subsystem of the Compal
platform driver.
This apparently was present in the original driver by Cezary Jackiewicz
at http://eko.one.pl/index.php?page=compal-laptop but it seems to have been
overlooked.
The Kconfig description is updated to reflect this addition. It now also
mentions the hwmon interface that was already present.
Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Afters suspend/resume cycle with closed lid the kbd backlight level
is lost. This patch will will restore this value to last known level.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function toshiba_acpi_setup_keyboard currently has two u32 variables
used to store the Hotkey Event Type and the result of the HCI_SYSTEM_EVENT
query.
This patch removes those two variables, as we already have a global
variable named "hotkey_event_type" and the result of the HCI_SYSTEM_EVENT
query can be checked directly from the function.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds the 0x prefix to the values printed by such function, the
values are already being printed in hex, but without the prefix, causing
confusion, even though the file under Documentation/ABI clearly states
that hey are hex values.
Simply add the 0x prefix to avoid such confusion.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The driver currently uses the hotkey enabling value of 0x09 to enable
hotkey events, but windows uses a different value (0x01).
All Toshiba laptops accept the following "hotkey" parameters:
0x01 - Enable hotkey and system events.
0x03 - Enable system events only.
0x09 - Enable hotkey events only.
0x0b - Disable (hotkey and system) events.
This patch changes the default hotkey enabling value from 0x09 to 0x01,
enabling both the hotkey and system events.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the driver has two functions enabling hotkeys support,
but these two functions can be merged into one.
This patch merges these two functions, moving some checks to the
*enable_hotkeys function, simplifying code in the process.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Fix an issue introduced by the previous major toshiba rework. Add a quirk.
Workaround a few platform specific firmware items. One cleanup to wmi I
inadvertently dropped from a previous pull request.
hp-wmi
- limit hotkey enable
toshiba_acpi:
- Fix hotkeys registration on some toshiba models
- Fix USB Sleep and Music always disabled
wmi:
- Remove private %pUL implementation
asus-nb-wmi:
- Add wapf=4 quirk for X456UA/X456UF
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV+2i5AAoJEKbMaAwKp364AmwIAKZd3N2lsI15wqx8fYKrvBTR
tdov/1v4N0T79BAngZNF7dIrSCzRGtjCK7w1zoR6B8vkrpJg2vgXS89GA9p0gkdq
jOQGuDswBDDD9KWDhlR0SjXE+P8T35gQMeeHNC8mpAfn9S9IGKEkLW4UsPF8tDxx
TmIv2b2kH8LN2SdmgkK1aNrDvm/Z7Z+2VH1a87NlNKQtJJFjxx5CVKs09UrzGOVG
ETOZ5+vq+7LR/ajzquEyPIZIFncz6adkxVKvFs9FuTFYza6VNBH+ED0QzijCY4mn
nAD7cIEa5b9/CSDgwaueBbCzLAkl0csPwjJiA4JaBWgVSn5ctZUUi0b+dApIU88=
=DQTr
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.3-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
"Fix an issue introduced by the previous major toshiba rework. Add a
quirk. Workaround a few platform specific firmware items. One
cleanup to wmi I inadvertently dropped from a previous pull request.
Details:
hp-wmi:
- limit hotkey enable
toshiba_acpi:
- Fix hotkeys registration on some toshiba models
- Fix USB Sleep and Music always disabled
wmi:
- Remove private %pUL implementation
asus-nb-wmi:
- Add wapf=4 quirk for X456UA/X456UF"
* tag 'platform-drivers-x86-v4.3-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
hp-wmi: limit hotkey enable
toshiba_acpi: Fix hotkeys registration on some toshiba models
toshiba_acpi: Fix USB Sleep and Music always disabled
wmi: Remove private %pUL implementation
asus-nb-wmi: Add wapf=4 quirk for X456UA/X456UF
Do not write initialize magic on systems that do not have
feature query 0xb. Fixes Bug #82451.
Redefine FEATURE_QUERY to align with 0xb and FEATURE2 with 0xd
for code clearity.
Add a new test function, hp_wmi_bios_2008_later() & simplify
hp_wmi_bios_2009_later(), which fixes a bug in cases where
an improper value is returned. Probably also fixes Bug #69131.
Add missing __init tag.
Signed-off-by: Kyle Evans <kvans32@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull thermal updates from Zhang Rui:
- use int instead of unsigned long to represent temperature to avoid
bogus overheat detection when negative temperature reported. From
Sascha Hauer.
- export available thermal governors information to user space via
sysfs. From Wei Ni.
- introduce new thermal driver for Wildcat Point platform controller
hub, which uses PCH thermal sensor and associated critical and hot
trip points. From Tushar Dave.
- add suuport for Intel Skylake and Denlow platforms in powerclamp
driver.
- some small cleanups in thermal core.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: Add Intel PCH thermal driver
thermal: Add comment explaining test for critical temperature
thermal: Use IS_ENABLED instead of #ifdef
thermal: remove unnecessary call to thermal_zone_device_set_polling
thermal: trivial: fix typo in comment
thermal: consistently use int for temperatures
thermal: add available policies sysfs attribute
thermal/powerclamp: add cpu id for denlow platform
thermal/powerclamp: add cpu id for Skylake u/y
thermal/powerclamp: add cpu id for skylake h/s
Commit a2b3471b5b ("toshiba_acpi: Use the Hotkey Event Type function
for keymap choosing") changed the *setup_keyboard function to query for
the Hotkey Event Type to help choose the correct keymap, but turns out
that here are certain Toshiba models out there not implementing this
feature, and thus, failing to continue the input device registration and
leaving such laptops without hotkey support.
This patch changes such check, and instead of returning an error if
the Hotkey Event Type is not present, we simply inform userspace about it,
changing the message printed from err to notice, making the function
responsible for registering the input device to continue.
This issue was found on a Toshiba Portege Z30-B, but there might be
some other models out there affected by this regression as well.
Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit e1a949c1b9 ("toshiba_acpi: Refactor *{get, set} functions return
value") made changes on the return type of the HCI/SCI functions, but a
typo on the USB Sleep and Music code is always reporting non existent
support for such feature.
This patch corrects the typo, changing an assignment to a comparison,
making the laptops with actual support for such feature to work again.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The work performed by wmi_gtoa is equivalent to simply sprintf(out,
"%pUL", in), so one could replace its body by this. However, most
users feed the result directly as a %s argument to some other function
which also understands the %p extensions (they all ultimately use
vsnprintf), so we can eliminate some stack buffers and quite a bit of
code by just using %pUL directly.
In wmi_dev_uevent I'm not sure whether there's room for a
nul-terminator in env->buf, so I've just replaced wmi_gtoa with the
equivalent sprintf call.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Significant work on toshiba_acpi, including new hardware support,
refactoring, and cleanups. Extend device support for asus, ideapad, and
acer systems. New surface pro 3 buttons driver. Misc. minor cleanups for
thinkpad and hp-wireless.
acer-wmi:
- No rfkill on HP Omen 15 wifi
thinkpad_acpi
- Remove side effects from vdbg_printk -> no_printk macro
surface pro 3
- Add support driver for Surface Pro 3 buttons
hp-wireless
- remove unneeded goto/label in hpwl_init
ideapad-laptop
- add alternative representation for Yoga 2 to DMI table
- Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list
asus-laptop
- Add key found on Asus F3M
MAINTAINERS
- Remove Toshiba Linux mailing list address
toshiba_acpi:
- Bump driver version to 0.23
- Remove unnecessary checks and returns in HCI/SCI functions
- Refactor *{get, set} functions return value
- Remove "*not supported" feature prints
- Change *available functions return type
- Add set_fan_status function
- Change some variables to avoid warnings from ninja-check
- Reorder toshiba_acpi_alt_keymap entries
- Remove unused wireless defines
- Transflective backlight updates
- Avoid registering input device on WMI event laptops
- Add /dev/toshiba_acpi device
- Adapt /proc/acpi/toshiba/keys to TOS1900 devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV6K71AAoJEKbMaAwKp364lzAIAIKeesYU4VevKg2wL6Em/dVP
4ftDgzhvFRQhM0CEe+uR8NWFNB/CVKVSphKD5mFtc0NAs0S0Eo/tmAlERfeq0qkt
HFSpP80deU+CwjURLo4wgMbPBPudHA3bNDZfSY6vq+/JhakdtheLyAODOda7uegz
PHV0zrgDntwVDAuBPTB2h6KigFXSc3soGCWcHTjD0PLNvTGvWOiNYO7otsclNzFc
qC0uerR4ryt6OFtul900/U/x1bfM9OAFNSnqWpfkkhQ4nskmkzDsyXutXm3CtXso
Ol3YS0Saj3gBGUmYua1smSU5u4IU9cQNeq6EEgR4jdHt2QQ8fJfmT0v5UgeiHHw=
=UZPt
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Significant work on toshiba_acpi, including new hardware support,
refactoring, and cleanups. Extend device support for asus, ideapad,
and acer systems. New surface pro 3 buttons driver. Misc minor
cleanups for thinkpad and hp-wireless.
acer-wmi:
- No rfkill on HP Omen 15 wifi
thinkpad_acpi:
- Remove side effects from vdbg_printk -> no_printk macro
surface pro 3:
- Add support driver for Surface Pro 3 buttons
hp-wireless:
- remove unneeded goto/label in hpwl_init
ideapad-laptop:
- add alternative representation for Yoga 2 to DMI table
- Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list
asus-laptop:
- Add key found on Asus F3M
MAINTAINERS:
- Remove Toshiba Linux mailing list address
toshiba_acpi:
- Bump driver version to 0.23
- Remove unnecessary checks and returns in HCI/SCI functions
- Refactor *{get, set} functions return value
- Remove "*not supported" feature prints
- Change *available functions return type
- Add set_fan_status function
- Change some variables to avoid warnings from ninja-check
- Reorder toshiba_acpi_alt_keymap entries
- Remove unused wireless defines
- Transflective backlight updates
- Avoid registering input device on WMI event laptops
- Add /dev/toshiba_acpi device
- Adapt /proc/acpi/toshiba/keys to TOS1900 devices"
* tag 'platform-drivers-x86-v4.3-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (21 commits)
acer-wmi: No rfkill on HP Omen 15 wifi
thinkpad_acpi: Remove side effects from vdbg_printk -> no_printk macro
surface pro 3: Add support driver for Surface Pro 3 buttons
hp-wireless: remove unneeded goto/label in hpwl_init
ideapad-laptop: add alternative representation for Yoga 2 to DMI table
asus-laptop: Add key found on Asus F3M
MAINTAINERS: Remove Toshiba Linux mailing list address
ideapad-laptop: Add Lenovo Yoga 3 14 to no_hw_rfkill dmi list
toshiba_acpi: Bump driver version to 0.23
toshiba_acpi: Remove unnecessary checks and returns in HCI/SCI functions
toshiba_acpi: Refactor *{get, set} functions return value
toshiba_acpi: Remove "*not supported" feature prints
toshiba_acpi: Change *available functions return type
toshiba_acpi: Add set_fan_status function
toshiba_acpi: Change some variables to avoid warnings from ninja-check
toshiba_acpi: Reorder toshiba_acpi_alt_keymap entries
toshiba_acpi: Remove unused wireless defines
toshiba_acpi: Transflective backlight updates
toshiba_acpi: Avoid registering input device on WMI event laptops
toshiba_acpi: Add /dev/toshiba_acpi device
...
These laptops boot with wifi as hard-blocked, with no obvious way to
enable it. Using a quirk to set wapf=4 solves the problem.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
- New Clocksource driver from ST
- New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
- Add support for Arizona WM8998 and WM1814
- Add support for Dialog Semi DA9062 and DA9063
- Add support for Kontron COMe-bBL6 and COMe-cBW6
- Add support for X-Powers AXP152
- Add support for Atmel, many
- Add support for STMPE, many
- Add support for USB in X-Powers AXP22X
- Core Frameworks
- New Base API to traverse devices and their children in reverse order
- Bug Fixes
- Fix race between runtime-suspend and IRQs
- Obtain platform data form more reliable source
- Fix-ups
- Constifying things
- Variable signage changes
- Kconfig depends|selects changes
- Make use of BIT() macro
- Do not supply .owner attribute in *_driver structures
- MAINTAINERS entries
- Stop using set_irq_flags()
- Start using irq_set_chained_handler_and_data()
- Export DT device ID structures
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV6FCRAAoJEFGvii+H/HdhO2MP/1GxcbbywMXU4goj40gJaYfx
kk0zH0S7i8+A8hD7SoCIQNkWN5o7i6sNYUA6sCTnPqixbyrkduWCyid1XsATu+41
iiKEGyiCRyEHhCwnwCXvaFhpAZBzDi7FKj6hhf6nnRMHSEqwrs2aBqWgzNrOZTs0
u66i/JHccnDdfHHm9Y7XcKMA8pWVqRMnwwaHreuYTFqfrEB0UGCYpmEeEBynGVKh
MUGC0lCUrEKp59aOexZRtBUla/5BeALJd//vMQtf/+D0YPvE8lppDNwkgCe4buXN
ZlNHDQooIWIiZfTj7wbHaTWjrBK7MsOEHWBUjNsk2nyDvDOJoGhTrSdJwPeyhUSh
d2eUyW6sPEQY21XPwuD0DhfRKYKLOzVRhIcxvjlRAq9QHDWVXKyIlf3M70fculK8
5FN1Wb6Sc2h0OvMC5RemPpxMwZSq6Ks3XANa718Ju802TGK/xk6iRqhZrEut/qrN
rLYsU84TLUz6YindozTiI5FrGo+zSp9OlUU4z7HUh+4t3H5/opdsRjRp0ICwgIbY
NxAmsk2d/vJ7xX7FAAjwMY2rPIC0zIksbGEe1AJweWV455EcDMaBM1/e9zDzHciI
TXVxbzs3DFBadtQWlLv/VkwZmt43MTI8g6ozTTJJkPQNCKThtz4bvDSu8rQWqFua
bkbRyQroraX5fM0Q3HIs
=2blS
-----END PGP SIGNATURE-----
Merge tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- New Clocksource driver from ST
- New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
- Add support for Arizona WM8998 and WM1814
- Add support for Dialog Semi DA9062 and DA9063
- Add support for Kontron COMe-bBL6 and COMe-cBW6
- Add support for X-Powers AXP152
- Add support for Atmel, many
- Add support for STMPE, many
- Add support for USB in X-Powers AXP22X
Core Frameworks:
- New Base API to traverse devices and their children in reverse order
Bug Fixes:
- Fix race between runtime-suspend and IRQs
- Obtain platform data form more reliable source
Fix-ups:
- Constifying things
- Variable signage changes
- Kconfig depends|selects changes
- Make use of BIT() macro
- Do not supply .owner attribute in *_driver structures
- MAINTAINERS entries
- Stop using set_irq_flags()
- Start using irq_set_chained_handler_and_data()
- Export DT device ID structures"
* tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: jz4740-adc: Init mask cache in generic IRQ chip
mfd: cros_ec: spi: Add OF match table
mfd: stmpe: Add OF match table
mfd: max77686: Split out regulator part from the DT binding
mfd: Add DT binding for Maxim MAX77802 IC
mfd: max77686: Use a generic name for the PMIC node in the example
mfd: max77686: Don't suggest in binding to use a deprecated property
mfd: Add MFD_CROS_EC dependencies
mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers
mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
mfd: axp20x: Add missing registers, and mark more registers volatile
mfd: arizona: Fixup some formatting/white space errors
mfd: wm8994: Fix NULL pointer exception on missing pdata
of: Add vendor prefix for Nuvoton
mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event
mfd: atmel-hlcdc: Add support for new SoCs
mfd: Export OF module alias information in missing drivers
mfd: stw481x: Export I2C module alias information
mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
mfd: max899x: Avoid redundant irq_data lookup
...
Prevents acer-wmi from blocking wifi on HP Omen 15 laptops
Signed-off-by: Michael Powell <michael_powell@mentor.com>
[david.ward@ll.mit.edu: Resubmitted clean patch]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
vdbg_printk when not using CONFIG_THINKPAD_ACPI_DEBUG uses
no_printk which produces no logging output but always
evaluates arguments.
Change the macro to surround the no_printk call with
do { if (0) no_printk(...); } while (0)
to avoid the unnecessary argument evaluations.
$ size drivers/platform/x86/thinkpad_acpi.o*
text data bss dec hex filename
60918 6184 824 67926 10956 drivers/platform/x86/thinkpad_acpi.o.new
60927 6184 824 67935 1095f drivers/platform/x86/thinkpad_acpi.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Since Surface Pro 3 does not follow the specs of "Windows ACPI Design
Guide for SoC Platform", code in drivers/input/misc/soc_array.c can
not detect these buttons on it. According to bios implementation,
Surface Pro 3 encapsulates these buttons in a device named "VGBI",
with _HID "MSHW0028". When any of the buttons is pressed, a specify
ACPI notification code for this button will be delivered to "VGBI". For
example, if power button is pressed down, ACPI notification code of 0xc6
will be sent by Notify(VGBI, 0xc6).
This patch leverages "VGBI" to distinguish different ACPI notification
code from Power button, Home button, Volume button, then dispatches these
code to input layer. Lid is already covered by acpi button driver, so
there's no need to rewrite.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=84651
Tested-by: Ethan Schoonover <es@ethanschoonover.com>
Tested-by: Peter Amidon <psa.pub.0@picnicpark.org>
Tested-by: Donavan Lance <tusklahoma@gmail.com>
Tested-by: Stephen Just <stephenjust@gmail.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[dvhart@linux.intel.com: Formatting corrections in MAINTAINERS and Intel (c)]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
acpi_bus_register_driver() already returns an appropriate value (0 on
success, and some negative value on error) to be used in __init functions
so the goto/label is redundant in hpwl_init thus remove it and directly
return the value
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Intel Sunrisepoint (Skylake PCH) has the iTCO watchdog accessible across
the SMBus, unlike previous generations of PCH/ICH where it was on the
LPC bus. Because it's on the SMBus, it doesn't make sense to pass around
a 'struct lpc_ich_info', and leaking the type of bus into the iTCO
watchdog driver is kind of backwards anyway.
This change introduces a new 'struct itco_wdt_platform_data' for use
inside the iTCO watchdog driver and by the upcoming Intel Sunrisepoint
code, which neatly avoids having to include lpc_ich headers in the i801
i2c driver.
This change is overdue because lpc_ich_info has already found its way
into other TCO watchdog users, notably the intel_pmc_ipc driver where
the watchdog actually isn't on the LPC bus as far as I can see.
A simple translation layer is provided for converting from the existing
'struct lpc_ich_info' inside the lpc_ich mfd driver.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com> [drivers/x86 refactoring]
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
There is at least one (mine) Yoga 2 Pro in existence that has incorrect
product version stored in DMI (reading as "INVALID"), causing it to not be
recognized as Yoga 2 by ideapad-laptop module, which in turn causes
non-existent hardware rfkills to be always reported as blocked.
This change adds a second check by board name, which is "Yoga2".
Looks like it also happens to be "INVALID" on some other Yoga 2 machines
where product version is correct instead, so the original check is left
intact to catch both cases.
Signed-off-by: Sebastian Krzyszkowiak <dos@dosowisko.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Asus F3M has two keys labeled with an icon of a touchpad. The first,
reported as 0x6B is next to the power key and the second, reported as
0x6A, is F9 combined with Fn button. When I was pressing the latter, I was
getting "Unknown key 6a pressed" message before applying this patch.
Asus F3M does not support WMI so the commit does not update key mappings
in the asus-nb-wmi.c file.
I have not tested this mapping on any other Asus laptop.
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Like some of the other Yoga models the Lenovo Yoga 3 14 does not have a
hw rfkill switch, and trying to read the hw rfkill switch through the
ideapad module causes it to always reported blocking breaking wifi.
This commit adds the Lenovo Yoga 3 14 to the no_hw_rfkill dmi list, fixing
the wifi breakage.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1239050
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Given that some features were added (/dev/toshiba_acpi device), some
clean-ups and minor (cosmetic) changes all over the driver code, bump
the driver version to 0.23 to reflect these overall changes.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
A previous patch added explicit feature checks for support, *SUCCESS*
and *FAILURE to the HCI/SCI *{get, set} functions.
This patch removes some unnedded checks to the driver HCI/SCI
functions given that the default error return value is now set to
-EIO, there is no need to check for other error values other than
the ones currently checking for.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch refactors the return value of the driver *{get, set}
functions, since the driver default error value is -EIO.
All the functions now check for TOS_FAILURE, TOS_NOT_SUPPORTED and
TOS_SUCCESS.
On TOS_FAILURE a pr_err message is printed informing the user of the
error (no change was made to this, except the check was added to the
functions not checking for this).
On TOS_NOT_SUPPORTED we now return -ENODEV immediately (some
functions were returning -EIO and some other were not checking)
On TOS_SUCCESS* we now return 0 (as a side effect, a new success value
was added, since some functions return one instead of zero to
indicate success).
As a special case, the LED functions now check for *FAILURE on
*set, and check for TOS_FAILURE and TOS_SUCCESS on *get with their
"default" return value set to LED_OFF.
Also the {lcd, video}_proc* functions were adapted to reflect these
changes to their parent HCI functions.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the driver prints "*not supported" if any of the features
queried are in fact not supported, let us print the available
features instead.
This patch removes all instances pr_info printing "*not supported",
and add a new function called "print_supported_features", which will
print the available laptop features.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch changes the *available functions return type from int to
void.
The checks for support of their respective features are done inside
such functions and there was no need to return anything as we can
flag the queried feature as supported inside these functions.
The code was adapted accordingly to these changes and two new
variables were created and another was changed from uint to bool.
Also, the function toshiba_acceleremoter_supported was renamed to
toshiba_accelerometer_available to maintain the naming consistency on
the driver.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The thermal code uses int, long and unsigned long for temperatures
in different places.
Using an unsigned type limits the thermal framework to positive
temperatures without need. Also several drivers currently will report
temperatures near UINT_MAX for temperatures below 0°C. This will probably
immediately shut the machine down due to overtemperature if started below
0°C.
'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
is above the melting point of all known materials.
Consistently use a plain 'int' for temperatures throughout the thermal code and
the drivers. This only changes the places in the drivers where the temperature
is passed around as pointer, when drivers internally use another type this is
not changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Peter Feuerer <peter@piie.net>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Peter Feuerer <peter@piie.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This patch adds a new function named "set_fan_status" to complement
its get* counterpart, as well as to avoid code duplication between
"fan_proc_write" and "fan_store".
Also, both functions (get*, set*) are now checking for TOS_FAILURE,
TOS_NOT_SUPPORTED and TOS_SUCCESS (to be on par with the rest of the
HCI/SCI functions), printing an error message, returning -ENODEV and
zero respectively.
The proc and sysfs functions were updated to reflect these changes as
well, returning -EIO for proc, and propagating the error value on the
sysfs functions.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch changes some variables to avoid warnings from ninja-check.
We are basically moving some variables inside the conditionals where
such variables are being used, and we are checking the returned values
of some others.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply reorders the entries found in the new keymap by
ascending order, this is simply a cosmetic change, no functionality
was modified.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit 2b74103547 ("toshiba_acpi: Remove bluetooth rfkill code")
removed bluetooth related code, however, the wireless defines were
not removed and are unused.
This patch simply removes those defines as there is no code using
them.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch changes the tr function second parameter from bool to u32,
to be on par with the rest of the TCI functions of the driver, and the
code was updated accordingly.
Also, the check for translective support was moved to the *add
function, as the {__get, set}_lcd_brightness functions make use of it.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit f11f999e98 ("toshiba_acpi: Refuse to load on machines with
buggy INFO implementations") denied loading on laptops with a WMI Event
GUID given that such laptops manage the hotkeys via that interface,
however, such laptops have a working Toshiba Configuration Interface
(TCI), and thus, such commit denied several supported features.
This patch avoids registering the input device and ignores all hotkey
events on laptops with such WMI Event GUID, making the supported
features found in those laptops to work.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
There were previous attempts to "merge" the toshiba SMM module to the
toshiba_acpi one, they were trying to imitate what the old toshiba
module does, however, some models (TOS1900 devices) come with a
"crippled" implementation and do not provide all the "features" a
"genuine" Toshiba BIOS does.
This patch adds a new device called toshiba_acpi, which aim is to
enable userspace to access the SMM on Toshiba laptops via ACPI calls.
Creating a new convenience _IOWR command to access the SCI functions
by opening/closing the SCI internally to avoid buggy BIOS, while at
the same time providing backwards compatibility.
Older programs (and new) who wish to access the SMM on newer models
can do it by pointing their path to /dev/toshiba_acpi (instead of
/dev/toshiba) as the toshiba.h header was modified to reflect these
changes as well as adds all the toshiba_acpi paths and command,
however, it is strongly recommended to use the new IOCTL for any
SCI command to avoid any buggy BIOS.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Since the introduction of TOS1900 devices support to the driver, the
"keys" entry under the proc directory was broken, given that it only
handled TOS620X devices accordingly.
This patch adapts the code to show the hotkey values of TOS1900
devices too, and in case some programs are still using that interface,
hotkeys reporting should now work on these devices.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
'{ }' and memset will both reset the cbuf buffer.
Only once is enough and this can be done outside fo the mutex.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The hwswitch state can be changed at runtime, so make sure dell-laptop
always knows the current state. It can be modified by the userspace
utility smbios-wireless-ctl.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make sure that return value of each SMBIOS call is properly checked and do
not continue processing output if the call failed.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make sure that before initializing SMBIOS call, the input buffer does
not contain any garbage (e.g. values from previous SMBIOS call). This
fixes problems with passing undefined/random parameters to SMBIOS
functions.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Avoid casting variables to different sizes due to different
compilers and settings.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: qipeng.zha <qipeng.zha@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
dell-laptop, a couple minor fixes, and some updated documentation in the
dell-laptop comments.
intel_pmc_ipc:
- Add Intel Apollo Lake PMC IPC driver
tc1100-wmi:
- Delete an unnecessary check before the function call "kfree"
dell-laptop:
- Fix allocating & freeing SMI buffer page
- Show info about WiGig and UWB in debugfs
- Update information about wireless control
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVmM8aAAoJEKbMaAwKp364iUkH/jihOduWkDTzzzxRP2Dv2nEh
qyvE94Nc9A9dl87C2+II/Pi1s8h4CJOQpl70syYYPc4FdF70hpvP8TbHkgCWrY/d
F8CoS9L9keviMtGOWlbEL9hBjfSDNwTMESTrDxrwhA04TSAwjDmXhhiUOF5FjFJm
CX5+ZQ3iXEH6KsENR+Er54J9+6WKE6IuRcnnKCapnPQ8cEYeVn+WEPyzHCOy8Pg3
xzzUar3/knS2VMIb5eIVpaKFvD9P9qBsC/gQ0pk1Y+686gwQZMVURDv8lw8hfXpx
TJDOXk21P8WbSH1r+jwax5wLjLge7vJtYG2Deye6MUgvSgg+O2tSVCv9SMQR088=
=WUgr
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull late x86 platform driver updates from Darren Hart:
"The following came in a bit later and I wanted them to bake in next a
few more days before submitting, thus the second pull.
A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
dell-laptop, a couple minor fixes, and some updated documentation in
the dell-laptop comments.
intel_pmc_ipc:
- Add Intel Apollo Lake PMC IPC driver
tc1100-wmi:
- Delete an unnecessary check before the function call "kfree"
dell-laptop:
- Fix allocating & freeing SMI buffer page
- Show info about WiGig and UWB in debugfs
- Update information about wireless control"
* tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver
tc1100-wmi: Delete an unnecessary check before the function call "kfree"
dell-laptop: Fix allocating & freeing SMI buffer page
dell-laptop: Show info about WiGig and UWB in debugfs
dell-laptop: Update information about wireless control
asus-wmi: Fan control
dell*: Add Dell airplane mode switch driver
ideapad-laptop: Platform rfkill fixes, and regression fix
pvpanic: Handle missing _STA correctly
toshiba*: Rafactor bluetooth support, haps documentation, driver cleanup
other: Use acpi_video_unregister_backlight instead of acpi_video_unregister in
serveral drivers.
Orphan msi-wmi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVks/CAAoJEKbMaAwKp364M5kH/06QhbX8NBSrzZk96jTmiFrP
pSO1Z6Jwnm3SL/phUAaRusNVWh0ZsaezvQ6M3Lnsjeh+07qPsF+lag+nHGYXSrQJ
3LVOdqXAojnvPIPNxaTSXylypF776WqFcWwzksICaJo/RA8mE/I4S0A6PMzujivV
6aAZEApED9EFWgnBWz8yYDscTUF7Bypy5/6uNtI0CRXFwUw1C05f5LW5J/qPpIMW
lerSLJKQSpuGbK3db4TqlwJOCZXdSb3HgzLAQKvzhRCukyEdA3zL76Jj6DfVhE9d
nKybk30qYVy1smEWH/I2jMSrxcjY56pRnGhanc/U5gSo9WARGjed/XKtbkFqpSQ=
=9RCr
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.2-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
"Fairly routine update for platform-drivers-x86.
Mostly fixes and cleanups, with a significant refactoring of toshiba*
drivers. Includes the addition of the dell-rbtn driver.
Details:
asus-wmi:
- fan control
dell*:
- add Dell airplane mode switch driver
ideapad-laptop:
- platform rfkill fixes, and regression fix
pvpanic:
- handle missing _STA correctly
toshiba*:
- rafactor bluetooth support
- haps documentation
- driver cleanup
other:
- Use acpi_video_unregister_backlight instead of
acpi_video_unregister in serveral drivers.
- Orphan msi-wmi.
* tag 'platform-drivers-x86-v4.2-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (24 commits)
MAINTAINERS: Orphan x86 driver msi-wmi
ideapad: fix software rfkill setting
dell-laptop: Use dell-rbtn instead i8042 filter when possible
dell-rbtn: Export notifier for other kernel modules
dell-rbtn: Dell Airplane Mode Switch driver
samsung-laptop: Use acpi_video_unregister_backlight instead of acpi_video_unregister
asus-wmi: Use acpi_video_unregister_backlight instead of acpi_video_unregister
apple_gmux: Use acpi_video_unregister_backlight instead of acpi_video_unregister
pvpanic: handle missing _STA correctly
ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
asus-wmi: add fan control
Documentation/ABI: Add file describing the sysfs entries for toshiba_haps
toshiba_haps: Make use of DEVICE_ATTR_{RW, WO} macros
toshiba_haps: Replace sscanf with kstrtoint
toshiba_acpi: Bump driver version to 0.22
toshiba_acpi: Remove TOS_FAILURE check from some functions
toshiba_acpi: Comments cleanup
toshiba_acpi: Rename hci_{read, write}1 functions
toshiba_acpi: Remove no longer needed hci_{read, write}2 functions
toshiba_bluetooth: Change BT status message to debug
...
This driver provides support for PMC control on Apollo Lake platforms.
The PMC is an ARC processor which defines some IPC commands for
communication with other entities in the CPU.
Signed-off-by: qipeng.zha <qipeng.zha@intel.com>
[fengguang.wu@intel.com: Fix Sparse and Cocinelle warnings]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Pull thermal management updates from Zhang Rui:
"Specifics:
- enhance Thermal Framework with several new capabilities:
* use power estimates
* compute weights with relative integers instead of percentages
* allow governors to have private data in thermal zones
* export thermal zone parameters through sysfs
Thanks to the ARM thermal team (Javi, Punit, KP).
- introduce a new thermal governor: power allocator. First in kernel
closed loop PI(D) controller for thermal control. Thanks to ARM
thermal team.
- enhance OF thermal to allow thermal zones to have sustainable power
HW specification. Thanks to Punit.
- introduce thermal driver for Intel Quark SoC x1000platform. Thanks
to Ong, Boon Leong.
- introduce QPNP PMIC temperature alarm driver. Thanks to Ivan T. I.
- introduce thermal driver for Hisilicon hi6220. Thanks to
kongxinwei.
- enhance Exynos thermal driver to handle Exynos5433 TMU. Thanks to
Chanwoo C.
- TI thermal driver now has a better implementation for EOCZ bit.
From Pavel M.
- add id for Skylake processors in int340x processor thermal driver.
- a couple of small fixes and cleanups."
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
thermal: hisilicon: add new hisilicon thermal sensor driver
dt-bindings: Document the hi6220 thermal sensor bindings
thermal: of-thermal: add support for reading coefficients property
thermal: support slope and offset coefficients
thermal: power_allocator: round the division when divvying up power
thermal: exynos: Add the support for Exynos5433 TMU
thermal: cpu_cooling: Fix power calculation when CPUs are offline
thermal: cpu_cooling: Remove cpu_dev update on policy CPU update
thermal: export thermal_zone_parameters to sysfs
thermal: cpu_cooling: Check memory allocation of power_table
ti-soc-thermal: request temperature periodically if hw can't do that itself
ti-soc-thermal: implement eocz bit to make driver useful on omap3
cleanup ti-soc-thermal
thermal: remove stale THERMAL_POWER_ACTOR select
thermal: Default OF created trip points to writable
thermal: core: Add Kconfig option to enable writable trips
thermal: x86_pkg_temp: drop const for thermal_zone_parameters
of: thermal: Introduce sustainable power for a thermal zone
thermal: add trace events to the power allocator governor
thermal: introduce the Power Allocator governor
...
This commit fix kernel crash when probing for rfkill devices in dell-laptop
driver failed. Function free_page() was incorrectly used on struct page *
instead of virtual address of SMI buffer.
This commit also simplify allocating page for SMI buffer by using
__get_free_page() function instead of sequential call of functions
alloc_page() and page_address().
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
- ACPICA update to upstream revision 20150515 including basic
support for ACPI 6 features: new ACPI tables introduced by
ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
other tables (DTRM, FADT, LPIT, MADT), new predefined names
(_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
fixes and cleanups (Bob Moore, Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation
in Windows (Rafael J Wysocki).
- Rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling
of DMI quirks that may be involved in that and to make the
code generally more straightforward (Hans de Goede).
- Fixes for the ACPI Embedded Controller (EC) driver related to
the handling of EC transactions (Lv Zheng).
- Fix for a regression related to the ACPI resources management
and resulting from a recent change of ACPI initialization code
ordering (Rafael J Wysocki).
- Fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the
code that switches the platform over to the ACPI mode too
early in the initialization sequence (Rafael J Wysocki).
- Support for the ACPI _CCA device configuration object related
to DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- Cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- Fix for a long-standing issue causing General Protection Faults
to be generated occasionally on return to user space after resume
from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- Fix to make the suspend core code return -EBUSY consistently in
all cases when system suspend is aborted due to wakeup detection
(Ruchi Kandoi).
- Support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- New tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- Wakeup sources framework enhancements (Jin Qian).
- New macro for noirq system PM callbacks (Grygorii Strashko).
- Assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should
reduce the overhead of these operations quite a bit, unless the
CPU in question is physically going away (Viresh Kumar, Saravana
Kannan).
- Serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- New Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- Updates for the common clock operations support code in the PM
core (Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- Fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- Runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=7jTj
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"The rework of backlight interface selection API from Hans de Goede
stands out from the number of commits and the number of affected
places perspective. The cpufreq core fixes from Viresh Kumar are
quite significant too as far as the number of commits goes and because
they should reduce CPU online/offline overhead quite a bit in the
majority of cases.
From the new featues point of view, the ACPICA update (to upstream
revision 20150515) adding support for new ACPI 6 material to ACPICA is
the one that matters the most as some new significant features will be
based on it going forward. Also included is an update of the ACPI
device power management core to follow ACPI 6 (which in turn reflects
the Windows' device PM implementation), a PM core extension to support
wakeup interrupts in a more generic way and support for the ACPI _CCA
device configuration object.
The rest is mostly fixes and cleanups all over and some documentation
updates, including new DT bindings for Operating Performance Points.
There is one fix for a regression introduced in the 4.1 cycle, but it
adds quite a number of lines of code, it wasn't really ready before
Thursday and you were on vacation, so I refrained from pushing it on
the last minute for 4.1.
Specifics:
- ACPICA update to upstream revision 20150515 including basic support
for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
_MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
Lv Zheng).
- ACPI device power management core code update to follow ACPI 6
which reflects the ACPI device power management implementation in
Windows (Rafael J Wysocki).
- rework of the backlight interface selection logic to reduce the
number of kernel command line options and improve the handling of
DMI quirks that may be involved in that and to make the code
generally more straightforward (Hans de Goede).
- fixes for the ACPI Embedded Controller (EC) driver related to the
handling of EC transactions (Lv Zheng).
- fix for a regression related to the ACPI resources management and
resulting from a recent change of ACPI initialization code ordering
(Rafael J Wysocki).
- fix for a system initialization regression related to ACPI
introduced during the 3.14 cycle and caused by running the code
that switches the platform over to the ACPI mode too early in the
initialization sequence (Rafael J Wysocki).
- support for the ACPI _CCA device configuration object related to
DMA cache coherence (Suravee Suthikulpanit).
- ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
- ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
- ACPI processor driver cleanups (Hanjun Guo).
- cleanups and documentation update related to the ACPI device
properties interface based on _DSD (Rafael J Wysocki).
- ACPI device power management fixes (Rafael J Wysocki).
- assorted cleanups related to ACPI (Dominik Brodowski, Fabian
Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
- fix for a long-standing issue causing General Protection Faults to
be generated occasionally on return to user space after resume from
ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
- fix to make the suspend core code return -EBUSY consistently in all
cases when system suspend is aborted due to wakeup detection (Ruchi
Kandoi).
- support for automated device wakeup IRQ handling allowing drivers
to make their PM support more starightforward (Tony Lindgren).
- new tracepoints for suspend-to-idle tracing and rework of the
prepare/complete callbacks tracing in the PM core (Todd E Brandt,
Rafael J Wysocki).
- wakeup sources framework enhancements (Jin Qian).
- new macro for noirq system PM callbacks (Grygorii Strashko).
- assorted cleanups related to system suspend (Rafael J Wysocki).
- cpuidle core cleanups to make the code more efficient (Rafael J
Wysocki).
- powernv/pseries cpuidle driver update (Shilpasri G Bhat).
- cpufreq core fixes related to CPU online/offline that should reduce
the overhead of these operations quite a bit, unless the CPU in
question is physically going away (Viresh Kumar, Saravana Kannan).
- serialization of cpufreq governor callbacks to avoid race
conditions in some cases (Viresh Kumar).
- intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
Bhargava, Joe Konno).
- cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
Holla, Felipe Balbi, Tang Yuantian).
- assorted cleanups in cpufreq drivers and core (Shailendra Verma,
Fabian Frederick, Wang Long).
- new Device Tree bindings for representing Operating Performance
Points (Viresh Kumar).
- updates for the common clock operations support code in the PM core
(Rajendra Nayak, Geert Uytterhoeven).
- PM domains core code update (Geert Uytterhoeven).
- Intel Knights Landing support for the RAPL (Running Average Power
Limit) power capping driver (Dasaratharaman Chandramouli).
- fixes related to the floor frequency setting on Atom SoCs in the
RAPL power capping driver (Ajay Thomas).
- runtime PM framework documentation update (Ben Dooks).
- cpupower tool fix (Herton R Krzesinski)"
* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
x86: Load __USER_DS into DS/ES after resume
PM / OPP: Add binding for 'opp-suspend'
PM / OPP: Allow multiple OPP tables to be passed via DT
PM / OPP: Add new bindings to address shortcomings of existing bindings
ACPI: Constify ACPI device IDs in documentation
ACPI / enumeration: Document the rules regarding the PRP0001 device ID
ACPI / video: Make acpi_video_unregister_backlight() private
acpi-video-detect: Remove old API
toshiba-acpi: Port to new backlight interface selection API
thinkpad-acpi: Port to new backlight interface selection API
sony-laptop: Port to new backlight interface selection API
samsung-laptop: Port to new backlight interface selection API
msi-wmi: Port to new backlight interface selection API
msi-laptop: Port to new backlight interface selection API
intel-oaktrail: Port to new backlight interface selection API
ideapad-laptop: Port to new backlight interface selection API
fujitsu-laptop: Port to new backlight interface selection API
eeepc-laptop: Port to new backlight interface selection API
dell-wmi: Port to new backlight interface selection API
...
This commit show additional information about rfkill state in debugfs based
on newly released documentation by Dell.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Make sure that all existing SMBIOS calls for wireless control are properly
documented. This commit also add new documentation released by Dell.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Azael Avalos <coproscefalo@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mattia Dongili <malattia@linux.it>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port the backlight selection logic to the new backlight interface
selection API.
This commit also removes various obsolete pr_xxx messages related to
backlight interface selection. These are obsolete because they assume
there is only a vendor or acpi backlight driver and no other choice.
Also they are not necessary, if the user wants to know which backlight
interfaces are registered a simple "ls /sys/class/backlight" suffices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is a preparation patch for the backlight interface selection logic
cleanup, there are 2 reasons to not always build the video_detect code
into the kernel:
1) In order for the video_detect.c to also deal with / select native
backlight interfaces on win8 systems, instead of doing this in video.c
where it does not belong, video_detect.c needs to call into the backlight
class code. Which cannot be done if it is builtin and the blacklight class
is not.
2) Currently all the platform/x86 drivers which have quirks to prefer
the vendor driver over acpi-video call acpi_video_unregister_backlight()
to remove the acpi-video backlight interface, this logic really belongs
in video_detect.c, which will cause video_detect.c to depend on symbols of
video.c and video.c already depends on video_detect.c symbols, so they
really need to be a single module.
Note that this commits make 2 changes so as to maintain 100% kernel
commandline compatibility:
1) The __setup call for the acpi_backlight= handling is moved to
acpi/util.c as __setup may only be used by code which is alwasy builtin
2) video.c is renamed to acpi_video.c so that it can be combined with
video_detect.c into video.ko
This commit also makes changes to drivers/platform/x86/Kconfig to ensure
that drivers which use acpi_video_backlight_support() from video_detect.c,
will not be built-in when acpi_video is not built in. This also changes
some "select" uses to "depends on" to avoid dependency loops.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_dmi_demote_vendor() is going away as part of the cleanup of
the code for determinging which backlight class driver(s) to register.
The call to acpi_video_dmi_demote_vendor() was meant to undo the call to
acpi_video_dmi_promote_vendor() when the gmux device is removed, this is
questionable though since the promote call sets a flag, not a counter, so
the demote call may undo a promoto done elsewhere. Moreover in practice
this is a nop since the gmux device is never removed, and the flag is only
checked when acpi/video.ko gets loaded, so even if the user manually
removes apple-gmux the demote call is still a nop as video.ko will already
have loaded by this time.
Also note that none of the other users of acpi_video_dmi_promote_vendor()
use acpi_video_dmi_demote_vendor().
If we ever encounter a system with a gmux where the acpi-video interface
should be used, then the proper fix would be to dmi-blacklist the gmux
driver on that system.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a broken_acpi_video quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) samsung-laptop.ko gets loaded, calls acpi_video_unregister() causing
both the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) samsung-laptop.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a wmi_backlight_power quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) asus-wmi.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) asus-wmi.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) whether or not the acpi video bus event listener
actually gets unregistered depends on module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) apple-gmux.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) apple-gmux.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This fixes a several year old regression that I found while trying
to get the Yoga 3 11 to work. The ideapad_rfk_set function is meant
to send a command to the embedded controller through ACPI, but
as of c1f73658ed, it sends the index of the rfkill device instead
of the command, and ignores the opcode field.
This changes it back to the original behavior, which indeed
flips the rfkill state as seen in the debugfs interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c1f73658ed ("ideapad: pass ideapad_priv as argument (part 2)")
Cc: stable@vger.kernel.org # v2.6.38+
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Until now module dell-laptop registered rfkill device which used i8042
filter function for receiving HW switch rfkill events (handling special
keycode).
But for some dell laptops there is native ACPI driver dell-rbtn which can
receive rfkill events (without i8042 hooks).
So this patch will combine best from both sides. It will use native ACPI
driver dell-rbtn for receiving events and dell-laptop SMBIOS interface for
enabling or disabling radio devices. If ACPI driver or device will not be
available fallback to i8042 filter function will be used.
Patch also changes module_init() to late_initcall() to ensure that init
function will be called after initializing dell-rbtn.c driver.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch exports notifier functions so other modules can receive HW
switch events. By default when some module register notifier, dell-rbtn
driver automatically remove rfkill interfaces from system (it is expected
that other module will use events for other rfkill interface). This
behaviour can be changed with new module parameter "auto_remove_rfkill".
This patch is designed for dell-laptop module for receiving those events.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
[dvhart@linux.intel.com: Cleanup MODULE_PARM_DESC formatting and grammar]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This is an ACPI driver for Dell laptops which receive HW slider radio
switch or hotkey toggle wifi button events. It exports rfkill device
dell-rbtn (which provide correct hard rfkill state) or hotkey input device.
Alex Hung is author of original hotkey input device code.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Alex Hung <alex.hung@canonical.com>
[fengguang.wu@intel.com: rbtn_ops can be static]
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
[dvhart@linux.intel.com: Correct multi-line comment formatting]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a broken_acpi_video quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) samsung-laptop.ko gets loaded, calls acpi_video_unregister() causing
both the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) samsung-laptop.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) and a wmi_backlight_power quirk, whether or not
the acpi video bus event listener actually gets unregistered depends on
module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) asus-wmi.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) asus-wmi.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: acpi4asus-user@lists.sourceforge.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Corentin Chary <corentin.chary@gmail.com)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
acpi_video_unregister() not only unregisters the acpi-video backlight
interface but also unregisters the acpi video bus event listener, causing
e.g. brightness hotkey presses to no longer generate keypress events.
The unregistering of the acpi video bus event listener usually is
undesirable, which by itself is a good reason to switch to
acpi_video_unregister_backlight().
Another problem with using acpi_video_unregister() rather then using
acpi_video_unregister_backlight() is that on systems with an intel video
opregion (most systems) whether or not the acpi video bus event listener
actually gets unregistered depends on module load ordering:
Scenario a:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) intel.ko gets loaded, calls acpi_video_register() which registers both
the listener and the acpi backlight interface
3) apple-gmux.ko gets loaded, calls acpi_video_unregister() causing both
the listener and the acpi backlight interface to unregister
Scenario b:
1) acpi/video.ko gets loaded (*), does not do acpi_video_register as there
is an intel opregion.
2) apple-gmux.ko gets loaded, calls acpi_video_dmi_promote_vendor(),
calls acpi_video_unregister(), which is a nop since acpi_video_register
has not yet been called
2) intel.ko gets loaded, calls acpi_video_register() which registers
the listener, but does not register the acpi backlight interface due to
the call to the preciding call to acpi_video_dmi_promote_vendor()
*) acpi/video.ko always loads first as both other modules depend on it.
So we end up with or without an acpi video bus event listener depending
on module load ordering, not good.
Switching to using acpi_video_unregister_backlight() means that independ
of ordering we will always have an acpi video bus event listener fixing
this.
Note that this commit means that systems without an intel video opregion,
and systems which were hitting scenario a wrt module load ordering, are
now getting an acpi video bus event listener while before they were not!
On some systems this may cause the brightness hotkeys to start generating
keypresses while before they were not (good), while on other systems this
may cause the brightness hotkeys to generate multiple keypress events for
a single press (not so good). Since on most systems the acpi video bus is
the canonical source for brightness events I believe that the latter case
will needs to be handled on a case by case basis by filtering out the
duplicate keypresses at the other source for them.
Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
pvpanic was not properly detected when _STA was missing.
ACPI 6.0 April 2015, 6.3.7 _STA (Status)
If a device object (including the processor object) does not have an
_STA object, then OSPM assumes that all of the above bits are set
(i.e., the device is present, enabled, shown in the UI, and
functioning).
Not adhering to the specification made pvpanic dormant under QEMU 2.3.
The original patch used acpi_bus_get_status_handle, which was not
being exported, so module build blew up; switch to acpi_bus_get_status
and use the status it populates.
Populated status is a bitfield so we can make the code self-documenting.
We do not check 'present' because 'enabled' has to be false in that case
by specification. Older QEMUs set 0xff to status and newer ones do 0xb.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
[dvhart@linux.intel.com: Merge acpi_bug_get_status fix to avoid bisect breakage]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Lenovo G30-50 does not have a hardware wireless switch and wireless
is always blocked.
BugLink: https://bugs.launchpad.net/bugs/1397021
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Philippe Coval <philippe.coval@open.eurogiciel.org>
[dvhart@linux.intel.com: Reordered dmi id per Phillippe's later version]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The conversion to DEVICE_ATTR_* macros failed to fixup a few cases where
the old attribute names didn't match the show/store function names.
Instead of renaming the functions, the attributes were renamed. This
caused an unintentional API change. The hwmon required 'name' attribute
were among the renamed attribute, causing libsensors to fail to detect
the hwmon device at all.
Fix by using the DEVICE_ATTR macro for these attributes, allowing the
show/store functions to keep their system specific prefixes.
Fixes: b4dd04ac6e ("thinkpad_acpi: use DEVICE_ATTR_* macros")
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch is partially based on Felipe Contrera's earlier patch, that
was discussed here: https://lkml.org/lkml/2013/10/8/800
Some problems of that patch are solved, now:
1) The main obstacle for the earlier patch seemed to be the use of
virt_to_phys, which is accepted, now
2) random memory corruption occurred on my notebook, thus DMA-able memory
is allocated now, which solves this problem
3) hwmon interface is used instead of the thermal interface, as a
hwmon device is already set up by this driver and seemed more
appropriate than the thermal interface
4) Calling the ACPI-functions was modularized thus it's possible to call
some multifunctions easily, now (by using
asus_wmi_evaluate_method_agfn).
Unfortunately the WMI doesn't support controlling both fans on
a dual-fan notebook because of an restriction in the acpi-method
"SFNS", that is callable through the wmi. If "SFNV" would be called
directly even dual fan configurations could be controlled, but not by using
wmi.
Speed readings only work on auto-mode, thus "-1" will be reported in
manual mode.
Additionally the speed readings are reported as hundreds of RPM thus
they are not too precise.
This patch is tested only on one notebook (N551JK) but a similar module,
that contained some code to try to control the second fan also, was
reported to work on an UX32VD, at least for the first fan.
As Felipe already mentioned the low-level functions are described here:
http://forum.notebookreview.com/threads/fan-control-on-asus-prime-ux31-ux31a-ux32a-ux32vd.705656/
Signed-off-by: Kast Bernd <kastbernd@gmx.de>
Acked-by: Corentin Chary <corentin.chary@gmail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch makes use of DEVICE_ATTR_{RW, WO} macros, simplifying
device attributes creation.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply replaces the use of sscanf with kstrtoint returning
the error code in case that something went bad.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply bumps the driver version to 0.22, as significant
changes were made to the driver, such as cleanups, updated events,
keymap handling, fixes and the bluetooth rfkill code removal.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch removes the check for TOS_FAILURE whenever we are using
the tci_raw function call, as that code is only returned by the
{hci, sci}_{read, write} functions and never by the tci_raw, and
thus making that check irrelevant.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply does some misc cleanup to comments, mainly
capitalizes some left over comments from a previous clean up and
adds some comments at the beginning of some feature function calls,
as well as some misc changes to some comments.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch simply renames the hci_{read, write}1 functions to
hci_{read, write}.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch removes the hci_{read, write}2 functions from the driver,
and the toshiba_hotkey_event_type_get function was adapted to use the
tci_raw function.
The hci_write2 function was only used by the bluetooth rfkill code,
but since its removal, it was causing build warnings, and the
hci_read2 function was only used by the toshiba_hotkey_event_type_get
function.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The function toshiba_bluetooth_status is currently printing the
status of the device whenever it is queried, but since the
introduction of the rfkill poll code, this value will get printed
everytime the poll occurs.
This patch removes the status message from the *_status function, and
adds a debug message to the *_sync_status function printing the
bluetooth device raw status, killswitch, plug and power states of the
device as well.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adapts toshiba_bluetooth_enable, toshiba_bt_rfkill_notify
and toshiba_bt_resume functions to rfkill.
The *_enable function was cleaned from code that the rfkill code now
provides, and the other two functions were modified to update the rfkill
switch status, as they were only calling toshiba_bluetooth_enable.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds RFKill handler functions to the driver, allowing it
to register and update the rfkill switch status.
Also, a comment block was moved from the header to the poll function,
as it explains why we need to poll the killswitch on older devices.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch adds a struct named toshiba_bluetooth_dev, which will be
used to contain the acpi_device struct and bluetooth status booleans.
This struct will also be used by later patches to store the rfkill
struct as well.
Also, a helper function named toshiba_bluetooth_sync_status was added
to be also used by upcomming patches.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch removes all bluetooth rfkill related code residing in
the toshiba_acpi driver.
Separate patches will add (and adapt) the code to toshiba_bluetooth
(where it belongs).
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Linus Torvalds