Commit Graph

485 Commits

Author SHA1 Message Date
Martin K. Petersen d93ba7a5a9 block: Add discard flag to blkdev_issue_zeroout() function
blkdev_issue_discard() will zero a given block range. This is done by
way of explicit writing, thus provisioning or allocating the blocks on
disk.

There are use cases where the desired behavior is to zero the blocks but
unprovision them if possible. The blocks must deterministically contain
zeroes when they are subsequently read back.

This patch adds a flag to blkdev_issue_zeroout() that provides this
variant. If the discard flag is set and a block device guarantees
discard_zeroes_data we will use REQ_DISCARD to clear the block range. If
the device does not support discard_zeroes_data or if the discard
request fails we will fall back to first REQ_WRITE_SAME and then a
regular REQ_WRITE.

Also update the callers of blkdev_issue_zero() to reflect the new flag
and make sb_issue_zeroout() prefer the discard approach.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-21 10:41:46 -07:00
Lars Ellenberg ff8bd88b73 drbd: fix resync throttling initialization
If for some reason DRBD resync was the only activity on a backend
device, drbd_rs_c_min_rate_throttle() would mistakenly decide that it is
still initialization time, and keep throttling the resync.

This patch explicitly initializes ->rs_last_events to the current
backend event counters, and drops the rs_last_events == 0 from the
throttle condition.

Reported-by: Mikhail Sugakov <msugakov@amazon.de>

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-11-10 09:27:37 -07:00
Lars Ellenberg abde9cc6a5 drbd: Improve asender performance
Shorten receive path in the asender thread. Reduces CPU utilisation
of asender when receiving packets, and with that increases IOPs.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-11 08:41:29 -06:00
Andreas Gruenbacher 11f8b2b69d drbd: Use better variable names
Rename local variable 'ds' to 'disk_state' or 'data_size'.
'dgs' to 'digest_size'

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-11 08:41:29 -06:00
Dan Carpenter bf0d6e4a11 drbd: silence underflow warning in read_in_block()
My static checker warns that "data_size" could be negative and underflow
the limit check.  The code looks suspicious but I don't know if it is a
real bug.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:23 +02:00
Lars Ellenberg 944410e97c drbd: debugfs: add callback_history
Add a per-connection worker thread callback_history
with timing details, call site and callback function.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:18 +02:00
Lars Ellenberg f418815f7a drbd: debugfs: Add in_flight_summary
* Add details about pending meta data operations to in_flight_summary.

* Report number of requests waiting for activity log transactions.

* timing details of peer_requests to in_flight_summary.

* FLUSH details
  DRBD devides the incoming request stream into "epochs",
  in which peers are allowed to re-order writes independendly.

  These epochs are separated by P_BARRIER on the replication link.
  Such barrier packets, depending on configuration, may cause
  the receiving side to drain the lower level device request queues
  and call blkdev_issue_flush().

  This is known to be an other major source of latency in DRBD.

  Track timing details of calls to blkdev_issue_flush(),
  and add them to in_flight_summary.

* data socket stats
  To be able to diagnose bottlenecks and root causes of "slow" IO on DRBD,
  it is useful to see network buffer stats along with the timing details of
  requests, peer requests, and meta data IO.

* pending bitmap IO timing details to in_flight_summary.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:17 +02:00
Lars Ellenberg c5a2c1509e drbd: register peer requests on read_ee early
Initialize peer_request with timestamp and proper empty list head.
Add peer_request to list early, so debugfs can find this request and
report it as "preparing", even if we sleep before we actually submit it.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:14 +02:00
Lars Ellenberg 21ae5d7f95 drbd: track timing details of peer_requests
To be able to present timing details in debugfs,
we need to track preparation/submit times of peer requests.

Track peer request flags early,
before they are put on the epoch_entry lists.

Waiting for activity log transactions may be a major latency factor.
We want to be able to present the peer_request state accurately in
debugfs, and what it is waiting for.

Consistently mark/unmark peer requests with EE_CALL_AL_COMPLETE_IO.
Set it only *after* calling drbd_al_begin_io(),
clear it as soon as we call drbd_al_complete_io().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:14 +02:00
Lars Ellenberg ad3fee7900 drbd: improve throttling decisions of background resynchronisation
Background resynchronisation does some "side-stepping", or throttles
itself, if it detects application IO activity, and the current resync
rate estimate is above the configured "cmin-rate".

What was not detected: if there is no application IO,
because it blocks on activity log transactions.

Introduce a new atomic_t ap_actlog_cnt, tracking such blocked requests,
and count non-zero as application IO activity.
This counter is exposed at proc_details level 2 and above.

Also make sure to release the currently locked resync extent
if we side-step due to such voluntary throttling.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:13 +02:00
Lars Ellenberg 45d2933c92 drbd: also keep track of trim -> zero-out fallback peer_requests
To be able to find and present such zero-out fallback peer_requests
in debugfs, we add those to "active_ee", once that list drained.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:09 +02:00
Lars Ellenberg b9ed7080d7 drbd: consistently use list_add_tail for peer_request tracking
Keep the epoch entry lists (active_ee, read_ee, sync_ee, ...)
consistently "oldest first".  That way finding the oldest not yet
successfully processed request is simply list_first_entry_or_null.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:08 +02:00
Lars Ellenberg 08d0dabf48 drbd: application writes may set-in-sync in protocol != C
If "dirty" blocks are written to during resync,
that brings them in-sync.

By explicitly requesting write-acks during resync even in protocol != C,
we now can actually respect this.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:02 +02:00
Philipp Reisner 5d0b17f1a2 drbd: New net configuration option socket-check-timeout
In setups involving a DRBD-proxy and connections that experience a lot of
buffer-bloat it might be necessary to set ping-timeout to an
unusual high value. By default DRBD uses the same value to wait if a newly
established TCP-connection is stable. Since the DRBD-proxy is usually located
in the same data center such a long wait time may hinder DRBD's connect process.

In such setups socket-check-timeout should be set to
at least to the round trip time between DRBD and DRBD-proxy. I.e. in most
cases to 1.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:01 +02:00
Philipp Reisner 4920e37a9e drbd: Limit the time we are waiting for the first packet on an accepted socket
Before the patch
'drbd: Keep the listening socket open while trying to connect to the peer'

the newly created socket inherited the receive timeout from the listen
socket. The listen socket had a receive timeout of connect-intervall
+- 30% random jitter.

The real issue is that after the mentioned patch we had no timeout at all.
Now use 4 times the ping-timeout.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:00 +02:00
Lars Ellenberg aaaba34576 drbd: implement csums-after-crash-only
Checksum based resync trades CPU cycles for network bandwidth,
in situations where we expect much of the to-be-resynced blocks
to be actually identical on both sides already.

In a "network hickup" scenario, it won't help:
all to-be-resynced blocks will typically be different.

The use case is for the resync of *potentially* different blocks
after crash recovery -- the crash recovery had marked larger areas
(those covered by the activity log) as need-to-be-resynced,
just in case. Most of those blocks will be identical.

This option makes it possible to configure checksum based resync,
but only actually use it for the first resync after primary crash.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:35:00 +02:00
Lars Ellenberg 6a8d68b187 drbd: don't implicitly resize Diskless node beyond end of device
During handshake, we compare backend sizes, and user set limits,
and agree on what device size we are going to expose.

We remember that last-agreed-size in our meta data.

But if we come up diskless, we have to accept what the peer
presents us with. We used to accept the peers maximum potential
capacity (backend size), which is wrong, and could lead to IO errors
due to access beyond end of device.

Instead, we need to accept the peer's current size.
Unless that is communicated as 0, in which case we
accept the backend size, or the user set limit, if set.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:59 +02:00
Lars Ellenberg 8ce953aa39 drbd: silence -Wmissing-prototypes warnings
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:57 +02:00
Lars Ellenberg 4dd726f029 drbd: get rid of drbd_queue_work_front
The last user was al_write_transaction, if called with "delegate",
and the last user to call it with "delegate = true" was the receiver
thread, which has no need to delegate, but can call it himself.

Finally drop the delegate parameter, drop the extra
w_al_write_transaction callback, and drop drbd_queue_work_front.

Do not (yet) change dequeue_work_item to dequeue_work_batch, though.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 18:34:56 +02:00
Lars Ellenberg 70df70927b drbd: allow write-ordering policy to be bumped up again
Previously, once you disabled flushes as a means of enforcing
write-ordering, you'd need to detach/re-attach to enable them again.

Allow drbdsetup disk-options to re-enable previously disabled
write-ordering policy options at runtime.

While at it fix RCU in drbd_bump_write_ordering()
max_allowed_wo() uses rcu_dereference, therefore it must
be called within rcu_read_lock()/rcu_read_unlock()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 15:22:22 +02:00
Lars Ellenberg 44a4d55184 drbd: refactor use of first_peer_device()
Reduce the number of calls to first_peer_device(). Instead, call
first_peer_device() just once to assign a local variable peer_device.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 15:22:22 +02:00
Philipp Reisner 8fe39aac05 drbd: device->ldev is not guaranteed on an D_ATTACHING disk
Some parts of the code assumed that get_ldev_if_state(device, D_ATTACHING)
is sufficient to access the ldev member of the device object. That was
wrong. ldev may not be there or might be freed at any time if the device
has a disk state of D_ATTACHING.

bm_rw()
  Documented that drbd_bm_read() is only called from drbd_adm_attach.
  drbd_bm_write() is only called when a reference is held, and it is
  documented that a caller has to hold a reference before calling
  drbd_bm_write()

drbd_bm_write_page()
  Use get_ldev() instead of get_ldev_if_state(device, D_ATTACHING)

drbd_bmio_set_n_write()
  No longer use get_ldev_if_state(device, D_ATTACHING). All callers
  hold a reference to ldev now.

drbd_bmio_clear_n_write()
  All callers where holding a reference of ldev anyways. Remove the
  misleading get_ldev_if_state(device, D_ATTACHING)

drbd_reconsider_max_bio_size()
  Removed the get_ldev_if_state(device, D_ATTACHING). All callers
  now pass a struct drbd_backing_dev* when they have a proper
  reference, or a NULL pointer.
  Before this fix, the receiver could trigger a NULL pointer
  deref when in drbd_reconsider_max_bio_size()

drbd_bump_write_ordering()
  Used get_ldev_if_state(device, D_ATTACHING) with the wrong assumption.
  Remove it, and allow the caller to pass in a struct drbd_backing_dev*
  when the caller knows that accessing this bdev is safe.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 15:22:20 +02:00
Philipp Reisner e952658020 drbd: Move write_ordering from connection to resource
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2014-07-10 15:22:19 +02:00
Lars Ellenberg 54ed4ed8f9 drbd: fix NULL pointer deref in blk_add_request_payload
Discards don't have any payload.
But the scsi layer still expects a bio_vec it can use internally,
see sd_setup_discard_cmnd() and blk_add_request_payload().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-25 09:53:47 -06:00
Philipp Reisner 67cca286ca drbd: Fix a hole in the challange-response connection authentication
In the implementation as it was, the two peers sent each other
a challenge, and expects the challenge hashed with the shared
secret back.

A attacker could simply wait for the challenge of the peer, and
send the same challenge back. Then it waits for the response, and
sends the same response back.

Prevent this by not accepting a challenge from the peer that is
the same as the challenge sent to the peer.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:55 -06:00
Lars Ellenberg 20c68fdea1 drbd: Enable QUEUE_FLAG_DISCARD only if the peer can recieve P_TRIM
Allow the user of REQ_DISCARD.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:55 -06:00
Lars Ellenberg a0fb3c47a1 drbd: prepare receiving side for REQ_DISCARD
If the receiver needs to serve a discard request on a queue that does
not announce to be discard cabable, it falls back to do synchronous
blkdev_issue_zeroout().

We expect only "reasonably" large (up to one activity log extent?)
discard requests.

We do this to not to not block the receiver for too long in this
fallback code path, and to not set/clear too many bits inside one
spinlock_irq_save() in drbd_set_in_sync/drbd_set_out_of_sync,

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:55 -06:00
Lars Ellenberg e829987433 drbd: don't let application IO pre-empt resync too often
Before, application IO could pre-empt resync activity
for up to hardcoded 20 seconds per resync request.
A very busy server could throttle the effective resync bandwidth
down to one request per 20 seconds.

Now, we only let application IO pre-empt resync traffic
while the current resync rate estimate is above c-min-rate.

If you disable the c-min-rate throttle feature (set c-min-rate = 0),
application IO will no longer pre-empt resync traffic at all.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Lars Ellenberg 0e49d7b014 drbd: fix potential distributed deadlock during verify or resync
If max-buffers and socket buffer sizes are "too small" for the chosen
resync rate, this could lead potentially lead to a distributed deadlock,
which may or may not resolve itself via the "ko-count" and request
timeout mechanism, or could be resolved by forced disconnect.

One option to deal with this is proper configuration:
use larger max-buffer and socket buffers settings,
or reduce the resync rate.

But even with bad configuration we should not deadlock,
but "gracefully" recover.

The issue is avoided by using only up to max-buffers/2 for resync
requests, and by using max-buffers not as a hard limit for data buffer
allocations, but as a throttle threshold only.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:54 -06:00
Philipp Reisner 31007745a5 drbd: Break a deadlock while concurrent fencing and establishing a connection
When we need to outdate the peer while being promoted to primary,
and the connection gets established at the same time, we deadlock
in drbd_try_outdate_peer() when trying to clear the susp_fen
bit.

Fix this by setting the STATE_SENT bit while holding the mutex.

Using drbd_change_state(.. , CS_HARD, ..) which does not block
until STATE_SENT is cleared, is only for clearness. It does
not contribute anything to the fix.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-30 13:46:53 -06:00
Linus Torvalds 5166701b36 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The first vfs pile, with deep apologies for being very late in this
  window.

  Assorted cleanups and fixes, plus a large preparatory part of iov_iter
  work.  There's a lot more of that, but it'll probably go into the next
  merge window - it *does* shape up nicely, removes a lot of
  boilerplate, gets rid of locking inconsistencie between aio_write and
  splice_write and I hope to get Kent's direct-io rewrite merged into
  the same queue, but some of the stuff after this point is having
  (mostly trivial) conflicts with the things already merged into
  mainline and with some I want more testing.

  This one passes LTP and xfstests without regressions, in addition to
  usual beating.  BTW, readahead02 in ltp syscalls testsuite has started
  giving failures since "mm/readahead.c: fix readahead failure for
  memoryless NUMA nodes and limit readahead pages" - might be a false
  positive, might be a real regression..."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  missing bits of "splice: fix racy pipe->buffers uses"
  cifs: fix the race in cifs_writev()
  ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
  kill generic_file_buffered_write()
  ocfs2_file_aio_write(): switch to generic_perform_write()
  ceph_aio_write(): switch to generic_perform_write()
  xfs_file_buffered_aio_write(): switch to generic_perform_write()
  export generic_perform_write(), start getting rid of generic_file_buffer_write()
  generic_file_direct_write(): get rid of ppos argument
  btrfs_file_aio_write(): get rid of ppos
  kill the 5th argument of generic_file_buffered_write()
  kill the 4th argument of __generic_file_aio_write()
  lustre: don't open-code kernel_recvmsg()
  ocfs2: don't open-code kernel_recvmsg()
  drbd: don't open-code kernel_recvmsg()
  constify blk_rq_map_user_iov() and friends
  lustre: switch to kernel_sendmsg()
  ocfs2: don't open-code kernel_sendmsg()
  take iov_iter stuff to mm/iov_iter.c
  process_vm_access: tidy up a bit
  ...
2014-04-12 14:49:50 -07:00
Al Viro f730c848af drbd: don't open-code kernel_recvmsg()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-01 23:19:32 -04:00
Andreas Gruenbacher 81f0ffd2a2 drbd: Remove unused parameter of wire_flags_to_bio()
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:46 +01:00
Andreas Gruenbacher e33b32de04 drbd: Get rid of first_peer_device() in handle_write_conflicts()
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:45 +01:00
Andreas Gruenbacher a8cd15ba79 drbd: struct drbd_peer_request: Use drbd_work instead of drbd_device_work
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:41 +01:00
Andreas Gruenbacher b5043c5e2c drbd: Turn conn_flush_workqueue() into drbd_flush_workqueue()
The new function can flush any work queue, not just the work queue of the data
socket of a connection.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:40 +01:00
Andreas Gruenbacher 84b8c06b65 drbd: Create a dedicated struct drbd_device_work
drbd_device_work is a work item that has a reference to a device,
while drbd_work is a more generic work item that does not carry
a reference to a device.

All callbacks get a pointer to a drbd_work instance, those callbacks
that expect a drbd_device_work use the container_of macro to get it.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:39 +01:00
Andreas Gruenbacher 8682eae9b4 drbd: Rename w_prev_work_done -> w_complete
Also move it to drbd_receiver.c and make it static.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:38 +01:00
Andreas Gruenbacher 69a227731a drbd: Pass a peer device to a number of fuctions
These functions actually operate on a peer device, or
need a peer device.

drbd_prepare_command(), drbd_send_command(), drbd_send_sync_param()
drbd_send_uuids(), drbd_gen_and_send_sync_uuid(), drbd_send_sizes()
drbd_send_state(), drbd_send_current_state(), and drbd_send_state_req()
drbd_send_sr_reply(), drbd_send_ack(), drbd_send_drequest(),
drbd_send_drequest_csum(), drbd_send_ov_request(), drbd_send_dblock()
drbd_send_block(), drbd_send_out_of_sync(), recv_dless_read()
drbd_drain_block(), receive_bitmap_plain(), recv_resync_read()
read_in_block(), read_for_csum(), drbd_alloc_pages(), drbd_alloc_peer_req()
need_peer_seq(), update_peer_seq(), wait_for_and_update_peer_seq()
drbd_sync_handshake(), drbd_asb_recover_{0,1,2}p(), drbd_connected()
drbd_disconnected(), decode_bitmap_c() and recv_bm_rle_bits()

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:50:31 +01:00
Andreas Gruenbacher 9f4fe9ad20 drbd: Replace vnr_to_mdev() with conn_peer_device()
The new function returns a peer device, which allows us to eliminate a few
instances of first_peer_device().

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:49:37 +01:00
Andreas Gruenbacher 79a3c8d38c drbd: drbd_csum_bio(), drbd_csum_ee(): Remove unused device argument
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:49:36 +01:00
Andreas Gruenbacher 8fe605513a drbd: Rename drbdd_init() -> drbd_receiver()
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:47:58 +01:00
Andreas Gruenbacher 0500813fe0 drbd: Move conf_mutex from connection to resource
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:46:46 +01:00
Andreas Gruenbacher 0b0ba1efc7 drbd: Add explicit device parameter to D_ASSERT
The implicit dependency on a variable inside the macro is problematic.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:45:04 +01:00
Andreas Gruenbacher 1ec861ebd0 drbd: Replace and remove the obsolete conn_() macros
With the polymorphic drbd_() macros, we no longer need the connection
specific variants.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:45:03 +01:00
Andreas Gruenbacher d018017102 drbd: Remove the terrible DEV hack
DRBD was using dev_err() and similar all over the code; instead of having to
write dev_err(disk_to_dev(device->vdisk), ...) to convert a drbd_device into a
kernel device, a DEV macro was used which implicitly references the device
variable.  This is terrible; introduce separate drbd_err() and similar macros
with an explicit device parameter instead.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:45:01 +01:00
Andreas Gruenbacher c06ece6ba6 drbd: Turn connection->volumes into connection->peer_devices
Let connection->peer_devices point to peer devices; connection->volumes was
pointing to devices.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:45:00 +01:00
Andreas Gruenbacher 05a10ec790 drbd: Improve some function and variable naming
Rename functions
conn_destroy() -> drbd_destroy_connection(),
drbd_minor_destroy() -> drbd_destroy_device()
drbd_adm_add_minor() -> drbd_adm_add_minor()
drbd_adm_delete_minor() -> drbd_adm_del_minor()

Rename global variable minors to drbd_devices

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:44:52 +01:00
Andreas Gruenbacher a6b32bc3ce drbd: Introduce "peer_device" object between "device" and "connection"
In a setup where a device (aka volume) can replicate to multiple peers and one
connection can be shared between multiple devices, we need separate objects to
represent devices on peer nodes and network connections.

As a first step to introduce multiple connections per device, give each
drbd_device object a single drbd_peer_device object which connects it to a
drbd_connection object.

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:44:51 +01:00
Andreas Gruenbacher bde89a9e15 drbd: Rename drbd_tconn -> drbd_connection
sed -i -e 's:all_tconn:connections:g' -e 's:tconn:connection:g'

Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
2014-02-17 16:44:47 +01:00