Commit Graph

2095 Commits

Author SHA1 Message Date
Ian Munsie 3d5be0392f cxl: Fail AFU initialisation if an invalid configuration record is found
If an AFU claims to have a configuration record but doesn't actually
contain a vendor and device ID, fail the AFU initialisation. Right now
this is just a way of politely letting AFU developers know that they
need to fix their config space, but later on we may expose the AFUs as
actual PCI devices in their own right and don't want to inadvertendly
expose an AFU with a bad config space.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-06 11:16:58 +11:00
Ian Munsie b087e6190d cxl: Export optional AFU configuration record in sysfs
An AFU may optionally contain one or more PCIe like configuration
records, which can be used to identify the AFU.

This patch adds support for exposing the raw config space and the
vendor, device and class code under sysfs. These will appear in a
subdirectory of the AFU device corresponding with the configuration
record number, e.g.

cat /sys/class/cxl/afu0.0/cr0/vendor
0x1014

cat /sys/class/cxl/afu0.0/cr0/device
0x4350

cat /sys/class/cxl/afu0.0/cr0/class
0x120000

hexdump -C /sys/class/cxl/afu0.0/cr0/config
00000000  14 10 50 43 00 00 00 00  06 00 00 12 00 00 00 00  |..PC............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
00000100

These files behave in much the same way as the equivalent files for PCI
devices, with one exception being that the config file is currently
read-only and restricted to the root user. It is not necessarily
required to be this strict, but we currently do not have a compelling
use-case to make it writable and/or world-readable, so I erred on the
side of being restrictive.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-06 11:16:56 +11:00
Al Viro 4c946d9c11 vmci: propagate msghdr all way down to __qp_memcpy_to_queue()
Switch from passing msg->iov_iter.iov to passing msg itself

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-04 01:34:14 -05:00
Dan Carpenter 63e144c9d6 ti-st: clean up data types (fix harmless memory corruption)
The big issue here is:

	of_property_read_u32(np, "flow_cntrl", (u32 *)&dt_pdata->flow_cntrl);

"->flow_cntrl" is a char so when we write a 32 bit number to it then it
corrupts past the end of the char.  It's probably hard to notice because
the struct has padding so the code works on little endian systems. But
on a big endian system the code would fail and on a 64 bit, big endian
systems then "nshutdown_gpio" and "baud_rate" would be buggy as well.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03 15:48:51 -08:00
Alexander Usyskin 663b7ee951 mei: me: release hw from reset only during the reset flow
We might enter the interrupt handler with hw_ready already set,
but prior we actually started the reset flow.
To soleve this we move the reset release from the interrupt handler
to the HW start wait function which is part of the reset sequence.

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03 15:48:51 -08:00
Alexander Usyskin 1ab1e79b9f mei: mask interrupt set bit on clean reset bit
We should mask interrupt set bit when writing back
hcsr value in reset bit clean-up.

This is refinement for
mei: clean reset bit before reset
commit b13a65ef19

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-03 15:48:51 -08:00
Ryan Grimm 6f963ec2d6 cxl: Fix device_node reference counting
When unbinding and rebinding the driver on a system with a card in PHB0, this
error condition is reached after a few attempts:

ERROR: Bad of_node_put() on /pciex@3fffe40000000
CPU: 0 PID: 3040 Comm: bash Not tainted 3.18.0-rc3-12545-g3627ffe #152
Call Trace:
[c000000721acb5c0] [c00000000086ef94] .dump_stack+0x84/0xb0 (unreliable)
[c000000721acb640] [c00000000073a0a8] .of_node_release+0xd8/0xe0
[c000000721acb6d0] [c00000000044bc44] .kobject_release+0x74/0xe0
[c000000721acb760] [c0000000007394fc] .of_node_put+0x1c/0x30
[c000000721acb7d0] [c000000000545cd8] .cxl_probe+0x1a98/0x1d50
[c000000721acb900] [c0000000004845a0] .local_pci_probe+0x40/0xc0
[c000000721acb980] [c000000000484998] .pci_device_probe+0x128/0x170
[c000000721acba30] [c00000000052400c] .driver_probe_device+0xac/0x2a0
[c000000721acbad0] [c000000000522468] .bind_store+0x108/0x160
[c000000721acbb70] [c000000000521448] .drv_attr_store+0x38/0x60
[c000000721acbbe0] [c000000000293840] .sysfs_kf_write+0x60/0xa0
[c000000721acbc50] [c000000000292500] .kernfs_fop_write+0x140/0x1d0
[c000000721acbcf0] [c000000000208648] .vfs_write+0xd8/0x260
[c000000721acbd90] [c000000000208b18] .SyS_write+0x58/0x100
[c000000721acbe30] [c000000000009258] syscall_exit+0x0/0x98

We are missing a call to of_node_get(). pnv_pci_to_phb_node() should
call of_node_get() otherwise np's reference count isn't incremented and
it might go away. Rename pnv_pci_to_phb_node() to pnv_pci_get_phb_node()
so it's clear it calls of_node_get().

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-02-02 14:51:31 +11:00
Jorgen Hansen a1d88436d5 VMCI: Fix two UVA mapping bugs
(this is a resend of this patch. Originally sent last year, but post
 appears to have been lost)

This change fixes two bugs in the VMCI host driver related to mapping
the notify boolean from user space into kernel space:
- the actual UVA was rounded up to the next page boundary - resulting
  in memory corruption in the calling process whenever notifications
  would be signalled. This has been fixed by just removing the
  PAGE_ALIGN part, since get_user_pages_fast can figure this out on
  its own
- the mapped page wasn't stored anywhere, so it wasn't unmapped and
  put back when a VMCI context was destroyed. Fixed this by
  remembering the page.

Acked-by: Andy King <acking@vmware.com>
Acked-by: Darius Davis <darius@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25 09:18:00 -08:00
Nicholas Mc Guire 3f46d81ae1 misc: ti-st: add handling of the signal case
if(!wait_for_completion_interruptible_timeout(...))
only handles the timeout case - this patch adds handling the
signal case the same as timeout.

Only the timeout case was being handled, the signal case
(-ERESTARTSYS) was treated just like the case of successful
completion, which is most likely not reasonable.

read_local_version() is called from download_firmware() where
it checks for !=0 return, so the error handling logic should be
preserved correctly.

download_firmware() is called from st_kim_start() which is
checking for !=0 return, so the error handling logic should be
preserved correctly

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25 09:18:00 -08:00
Tomas Winkler 79563db9dd mei: add reference counting for me clients
To support dynamic addition and removal of
me clients we add reference counter.

Update kdoc with locking requirements.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25 09:17:56 -08:00
Ryan Grimm 62fa19d4b4 cxl: Add ability to reset the card
Adds reset to sysfs which will PERST the card. If load_image_on_perst is set
to "user" or "factory", the PERST will cause that image to be loaded.

load_image_on_perst is set to "user" for production.

"none" could be used for debugging. The PSL trace arrays are preserved which
then can be read through debugfs.

PERST also triggers CAPP recovery. An HMI comes in, which is handled by EEH.
EEH unbinds the driver, calls into Sapphire to reinitialize the PHB, then
rebinds the driver.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22 17:31:52 +11:00
Ryan Grimm 1212aa1c8c cxl: Enable CAPP recovery
Turning snoops on is the last step in CAPP recovery. Sapphire is expected to
have reinitialized the PHB and done the previous recovery steps.

Add mode argument to opal call to do this. Driver can turn snoops off although
it does not currently.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22 17:31:52 +11:00
Ryan Grimm 95bc11bcd1 cxl: Add image control to sysfs
load_image_on_perst identifies whether a PERST will cause the image to be
flashed to the card. And if so, which image.

Valid entries are: "none", "user" and "factory".

A value of "none" means PERST will not cause the image to be flashed. A
power cycle to the pcie slot is required to load the image.

"user" loads the user provided image and "factory" loads the factory image upon
PERST.

sysfs updates the cxl struct in the driver then calls cxl_update_image_control
to write the vals in the VSEC.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22 17:31:51 +11:00
Ryan Grimm 4beb5421ba cxl: Use image state defaults for reloading FPGA
Select defaults such that a PERST causes flash image reload.  Select which
image based on what the card is set up to load.

CXL_VSEC_PERST_LOADS_IMAGE selects whether PERST assertion causes flash image
load.

CXL_VSEC_PERST_SELECT_USER selects which image is loaded on the next PERST.

cxl_update_image_control writes these bits into the VSEC.

Signed-off-by: Ryan Grimm <grimm@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22 17:31:51 +11:00
Ian Munsie 9bcf28cdb2 cxl: Add tracepoints
This patch adds tracepoints throughout the cxl driver, which can provide
insight into:

- Context lifetimes
- Commands sent to the PSL and AFU and their completion status
- Segment and page table misses and their resolution
- PSL and AFU interrupts
- slbia calls from the powerpc copro_fault code

These tracepoints are mostly intended to aid in debugging (particularly
for new AFU designs), and may be useful standalone or in conjunction
with hardware traces collected by the PSL (read out via the trace
interface in debugfs) and AFUs.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22 17:31:51 +11:00
Colin Ian King d3383aaae9 cxl: remove redundant increment of hwirq
hwirq has not been initialized, however it is being incremented
and also not being referenced in a loop.  This error was detected with
cppcheck:

[drivers/misc/cxl/irq.c:439]: (error) Uninitialized variable: hwirq

Commit 80fa93fce3 ("cxl: Name interrupts in /proc/interrupt")
introduced this error.

This is a simple fix that removes the redundant increment.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-22 17:31:51 +11:00
Greg Kroah-Hartman 3542f6b183 Merge 3.19-rc5 into char-misc-next
We want the 3.19-rc5 fixes in here for our testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-19 06:56:57 +08:00
Linus Torvalds 7ad4b4ae57 Char/Misc driver fixes for 3.19-rc5
Here are 3 small driver fixes for reported issues for 3.19-rc5.  All of
 these have been in linux-next for a while with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlS5VzYACgkQMUfUDdst+ylv5gCfT8krEtuWXM1NMZwIuftf4Whb
 z8cAn23whaxGED7AyBRVXxMohYF8Vxq9
 =yMIV
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are three small driver fixes for reported issues for 3.19-rc5.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-3.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0
  mei: add ABI documentation for fw_status exported through sysfs
  mei: clean reset bit before reset
2015-01-17 08:18:08 +13:00
Mohammad Jamal c076860dd8 ad525x_dpot-spi: Added Blank lines after declarations
This patch solves the blank line warning of checkpatch.pl

Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:12 -08:00
Mohammad Jamal 3d494bba92 ad525x_dpot:Remove break after return
This patch removes the break statements present after return

Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:12 -08:00
Mohammad Jamal 1558455582 ad525x_dpot: Add a blank line after declaration
Added a blank line after declaration to fix the warning of checkpatch.pl

Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:12 -08:00
Fabian Frederick 0ecb3dffb1 GenWQE: remove unnecessary version.h inclusion
Based on versioncheck.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Richard Leitner 769105aa74 misc: ioc4: simplify wave period measurement in clock_calibrate
The loop for measuring the square wave periods over some cycles is
refactored to be more easily readable. This includes avoiding a
"by-hand-implemented" for loop with a "real" one and adding some
comments.

Furthermore the following compiler warning is avoided by this patch:
drivers/misc/ioc4.c: In function ‘ioc4_probe’:
drivers/misc/ioc4.c:194:16: warning: ‘start’ may be used uninitialized
in this function [-Wmaybe-uninitialized]
  period = (end - start) /
                ^
drivers/misc/ioc4.c:148:11: note: ‘start’ was declared here
  uint64_t start, end, period;
           ^

Signed-off-by: Richard Leitner <dev@g0hl1n.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Gigi Joseph 0ec0cf1920 drivers:misc:ti-st: protect against bad packets
We encounter situations where we got bad packet type from the
UART (probably due to platform problem or UART driver issues)
which caused us out of boundary array access,
which eventually led to kernel panic.

Signed-off-by: Amir Ayun <amira@ti.com>
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Leonid Iziumtsev <x0153368@ti.com>
Signed-off-by: Gigi Joseph <gigi.joseph@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Gigi Joseph 868eba8e13 drivers: misc: ti-st: fix null pointer exception in st_kim_ref()
st_kim_ref() does not take care of the fact that platform_get_drvdata() might return NULL. On AM437x EVM, this causes the platform to stop booting as soon as the module is inserted.

This patch fixes the issue by checking for NULL return value. Oops log follows.

I have not tested BT functionality after this patch. But at least the platform boots now.

[   12.675697] Unable to handle kernel NULL pointer dereference at virtual address 0000005c
[   12.684310] pgd = c0004000
[   12.687157] [0000005c] *pgd=00000000
[   12.690927] Internal error: Oops: 17 [#1] SMP ARM
[   12.695873] Modules linked in: btwilink bluetooth ti_vpfe dwc3(+) ov2659 videobuf2_core v4l2_common videodev ti_am335x_adc 6lowpan_iphc matrix_keypad panel_dpi kfifo_buf pixcir_i2c_ts media industrialio videobuf2_dma_contig c_can_platform videobuf2_memops dwc3_omap c_can can_dev
[   12.721969] CPU: 0 PID: 1235 Comm: kworker/u3:0 Not tainted 3.14.25-02445-g9036ac6daed6 #128
[   12.730937] Workqueue: hci0 hci_power_on [bluetooth]
[   12.736165] task: ebd93b40 ti: ecd7c000 task.ti: ecd7c000
[   12.741856] PC is at st_kim_ref+0x30/0x40
[   12.746071] LR is at st_kim_ref+0x30/0x40
[   12.750289] pc : [<c03caf58>]    lr : [<c03caf58>]    psr: a0000013
[   12.750289] sp : ecd7de08  ip : ecd7de08  fp : ecd7de1c
[   12.762365] r10: bf1e710c  r9 : bf1e70ec  r8 : bf1e7964
[   12.767858] r7 : ebd2fd50  r6 : bf1e7964  r5 : 00000000  r4 : ecd7de24
[   12.774723] r3 : c0957208  r2 : 00000000  r1 : c0957208  r0 : 00000000
[   12.781589] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[   12.789274] Control: 10c5387d  Table: abde4059  DAC: 00000015
[   12.795315] Process kworker/u3:0 (pid: 1235, stack limit = 0xecd7c248)

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Gigi Joseph <gigi.joseph@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Gigi Joseph c6ec0fb400 drivers: misc: ti-st: fix debugfs creation error handling
In case the debugfs creation fails the whole init process was failing.
There is no need to do this as the shared transport can work without it.
Fix it so it just reports the failure and continue.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Gigi Joseph <gigi.joseph@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:11 -08:00
Gigi Joseph 4b4aa3ab98 st_kim: allow suspend if callback is not registered
Suspend/resume was failing if callbacks were not registered.
As it is ok not to do anything when suspending fix this
so it soen't return an error and allow the system to suspend.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Gigi Joseph <gigi.joseph@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:10 -08:00
Gigi Joseph 46d0d33350 ti-st: add device tree support
When using device tree, driver configuration data need to be read from
device node.
Add support for getting the platform data information from the device
tree information stored in the .dtb file in case it exists.

Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: bvijay <bvijay@ti.com>
Diff rendering mode:inlineside by side

Signed-off-by: Gigi Joseph <gigi.joseph@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:10 -08:00
Tomas Winkler 2e5df413be mei: use uuid, me_addr tuple addressing also for flow control credits
Add uuid, me_addr addressing also for flow control credits.
The only exception in cases for single buffer clients for which
the host address in flow credits response is always 0

To in order to deal with add/remove race between fw and driver clients
addressing we need to use [uuid, me_addr] tuple to address the clients

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:10 -08:00
Tomas Winkler 39db74ce1a mei: bus: use ssize_t as the return type for send and receive
Mei bus receive and send function may return either number
of transmitted bytes or errno.  It is better to use ssize_t
type for that purpose that mixing size_t with int.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-12 05:04:10 -08:00
Ian Munsie 0712dc7e73 cxl: Fix issues when unmapping contexts
An issue was introduced with "cxl: Unmap MMIO regions when detaching a
context" (b123429e6a) where closing a
context normally could also unmap the problem state area of other
contexts currently using the AFU.

It was also discovered that after a context's MMIO space had been
unmapped it would read 0s when accessing it, whereas the expected
behaviour was for the access to fail altogether.

In order to address these issues, this patch does two things:

- Forced mmap unmapping is only done when we are forcefully detaching
  all contexts, and not in the normal detach path. Since the normal
  context close path is tied to the file release any mmaps must have
  already been released so we don't need to worry in that case.

- The mmap path now uses a vm_operations_struct with a fault handler.
  The fault handler ensures that the context is in started state,
  otherwise it fails the access attempt with a SIGBUS.

Fixes: b123429e6a ("cxl: Unmap MMIO regions when detaching a context")
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-12 16:40:02 +11:00
Alexander Usyskin b13a65ef19 mei: clean reset bit before reset
H_RST bit in H_CSR register may be found lit before reset is started,
for example if preceding reset flow hasn't completed.
In that case asserting H_RST will be ignored, therefore we need to clean
H_RST bit to start a successful reset sequence.

Cc: <stable@vger.kernel.org> #3.10+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-09 14:53:13 -08:00
Song Liu 08024885a2 ses: Add power_status to SES device slot
Add power_status to SES device slot, so we can power on/off the
HDDs behind the enclosure.

Check firmware status in ses_set_* before sending control pages to
firmware.

Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09 15:44:19 +01:00
Dan Williams 921ce7f578 ses: add reliable slot attribute
The name provided by firmware is in a vendor specific format, publish
the slot number to have a reliable mechanism for identifying slots
across firmware implementations.  If the enclosure does not provide a
slot number fallback to the component number which is guaranteed unique,
and usually mirrors the slot number.

Cleaned up the unused ses_component.desc in the process.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09 15:44:19 +01:00
Dan Williams 967f7bab0e ses: add enclosure logical id
Export the NAA logical id for the enclosure.  This is optionally
available from the sas_transport_class, but it is really a property of
the enclosure.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09 15:44:18 +01:00
Dan Williams ed09dcc8bd ses: close potential registration race
The slot and address fields have a small window of instability when
userspace can read them before initialization. Separate
enclosure_component
allocation from registration.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09 15:44:17 +01:00
Ian Munsie db7933f392 cxl: Disable SPAP register when freeing SPA
When we deactivate the AFU directed mode we free the scheduled process
area, but did not clear the register in the hardware that has a pointer
to it.

This should be fine since we will have already cleared out every context
and we won't do anything that would cause the hardware to access it
until after we have allocated a new one, but just to be safe this patch
clears out the register when we free the page.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29 15:45:44 +11:00
Ian Munsie d6a6af2c18 cxl: Disable AFU debug flag
Upon inspection of the implementation specific registers, it was
discovered that the high bit of the implementation specific RXCTL
register was enabled, which enables the DEADB00F debug feature.

The debug feature causes MMIO reads to a disabled AFU to respond with
0xDEADB00F instead of all Fs. In general this should not be visible as
the kernel will only allow MMIO access to enabled AFUs, but there may be
some circumstances where an AFU may become disabled while it is use.
One such case would be an AFU designed to only be used in the dedicated
process mode and to disable itself after it has completed it's work
(however even in that case the effects of this debug flag would be
limited as the userspace application must have completed any required
MMIO accesses before the AFU disables itself with or without the flag).

This patch removes the debug flag and replaces the magic value
programmed into this register with a preprocessor define so it is
clearer what the rest of this initialisation does.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29 15:45:43 +11:00
Ian Munsie 13da704682 cxl: Early return from cxl_handle_fault for a shut down context
If a context is being detached and we get a translation fault for it
there is little point getting it's mm and handling the fault, so just
respond with an address error and return earlier.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29 15:45:43 +11:00
Ian Munsie 456295e284 cxl: Fix leaking interrupts if attach process fails
In this particular error path we have already allocated the AFU
interrupts, but have not yet set the status to STARTED. The detach
context code will only attempt to release the interrupts if the context
is in state STARTED, so in this case the interrupts would remain
allocated.

This patch releases the AFU interrupts immediately if the attach call
fails to prevent them leaking.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-29 15:45:43 +11:00
Linus Torvalds 34b85e3574 powerpc updates for 3.19 batch 2
The highlight is the series that reworks the idle management on powernv, which
 allows us to use deeper idle states on those machines.
 
 There's the fix from Anton for the "BUG at kernel/smpboot.c:134!" problem.
 
 An i2c driver for powernv. This is acked by Wolfram Sang, and he asked that we
 take it through the powerpc tree.
 
 A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of the audit
 maintainers.
 
 A patch from Ben to export the symbol map of our OPAL firmware as a sysfs file,
 so that tools can use it.
 
 Also some CXL fixes, a couple of powerpc perf fixes, a fix for smt-enabled, and
 the patch to add __force to get_user() so we can use bitwise types.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUk+oCAAoJEFHr6jzI4aWADBAP/i/CJ+cu6o4mzNDdfs8bnxqn
 RGZCSV+SrkTZPcoLbLiM9iaqq34ORVIn7hwkhkTz2/koluMVfTsqtVulMoFf+hVd
 GTVt81MjMFzA3hM3bXEV58KRT79+64K54dLCe0F7OaD6f4AikKR4LLz/PY0EBMiZ
 2h13uQlfglaMeYTsaD9eeUpIIKs7+PwsNqUknmN9We07WWfxWqnRpiTR4TYTMXx4
 3lQPvCnnHokwDqjuKgwiqDVSaCfCl8laS1i+BPk0G0aRV1AnPDvR3MhgVb2IpNxX
 Joxy2D1HSawwDhqHOsId8dkGZXOM4vzo+Y658qnC1XfThqE0MhA+kCfa5/b6xlOR
 K7nDO5A41B6nXB3mMOQh/szTXSIa8KJRTR3ibbJJrMdF6F0TN0JLLQNUcmM4j/5D
 vvgZEzvFNZhWX98ktlQLde2E4ClWJg6mWESCGSgJeVjIXaxe/6GneIa8vLKm5QMu
 OoykNsASMDGqddYMGoYeX/mSsvjPjK0PDO2q19sPbkP8xpyDLx6J8xo+5hO4l8xc
 0Cdb38ECfeno+w5oKAnjidHnz0KYBsuYFLeS+rV0b8sUSWAzfdEjSn2AVIQ8gLOv
 IOCAqwZ5tL9EcUs+AKru5EHtBEV+2XB54xPRxfdFS/k+vYRE7MpS3ipxveIynN2l
 eRxf9hsSO7ASNDd0b3ID
 =GXdK
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull second batch of powerpc updates from Michael Ellerman:
 "The highlight is the series that reworks the idle management on
  powernv, which allows us to use deeper idle states on those machines.

  There's the fix from Anton for the "BUG at kernel/smpboot.c:134!"
  problem.

  An i2c driver for powernv.  This is acked by Wolfram Sang, and he
  asked that we take it through the powerpc tree.

  A fix for audit from rgb at Red Hat, acked by Paul Moore who is one of
  the audit maintainers.

  A patch from Ben to export the symbol map of our OPAL firmware as a
  sysfs file, so that tools can use it.

  Also some CXL fixes, a couple of powerpc perf fixes, a fix for
  smt-enabled, and the patch to add __force to get_user() so we can use
  bitwise types"

* tag 'powerpc-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
  powerpc/powernv: Ignore smt-enabled on Power8 and later
  powerpc/uaccess: Allow get_user() with bitwise types
  powerpc/powernv: Expose OPAL firmware symbol map
  powernv/powerpc: Add winkle support for offline cpus
  powernv/cpuidle: Redesign idle states management
  powerpc/powernv: Enable Offline CPUs to enter deep idle states
  powerpc/powernv: Switch off MMU before entering nap/sleep/rvwinkle mode
  i2c: Driver to expose PowerNV platform i2c busses
  powerpc: add little endian flag to syscall_get_arch()
  power/perf/hv-24x7: Use kmem_cache_free() instead of kfree
  powerpc/perf/hv-24x7: Use per-cpu page buffer
  cxl: Unmap MMIO regions when detaching a context
  cxl: Add timeout to process element commands
  cxl: Change contexts_lock to a mutex to fix sleep while atomic bug
  powerpc: Secondary CPUs must set cpu_callin_map after setting active and online
2014-12-19 12:57:45 -08:00
Linus Torvalds 64ec45bff6 vhost/virtio: virtio 1.0 related fixes
Most importantly, this fixes using virtio_pci as a module.
 
 Further, the big virtio 1.0 conversion missed a couple of places. This fixes
 them up.
 
 This isn't 100% sparse-clean yet because on many architectures get_user
 triggers sparse warnings when used with __bitwise tag (when same tag is on both
 pointer and value read).
 
 I posted a patchset to fix it up by adding __force on all
 arches that don't already have it (many do), when that's
 merged these warnings will go away.
 
 Cc: Rusty Russell <rusty@rustcorp.com.au>
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUkSztAAoJECgfDbjSjVRp5DkH/ibw+0ZaEFP/SXWnw6WONpaG
 pzMsrfMG/vxlOfutSUdDqG+oqqU2fSLvFq5qDK6Xk9/emRSwGduz29ZaxGh8J1MZ
 /Ojqtu/HSLl+UASTs+fMw49itghoIjmAPBwwMkQjvanfqLclgdz9UxzoCOc4YkO0
 PJQA/Vw6blVSP1m0p97PvzZkAiIetI2ixZn2vPJZc8vSkOHtygM9HdXKTv785HbG
 ycRbR9B3OBMvq26FIuWeyuY93FnyX2Qtf2bzwSSRdzo7qlsNhVVG7sKyWOOR+1xG
 TLmjhyTF57oA2GgZCVfgnFxsfiuIKMumfG0jbABTXmBGgA/ULef7HcF/lzLgdq8=
 =32cU
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio fixes from Michael S Tsirkin:
 "virtio 1.0 related fixes

  Most importantly, this fixes using virtio_pci as a module.

  Further, the big virtio 1.0 conversion missed a couple of places.
  This fixes them up.

  This isn't 100% sparse-clean yet because on many architectures
  get_user triggers sparse warnings when used with __bitwise tag (when
  same tag is on both pointer and value read).

  I posted a patchset to fix it up by adding __force on all arches that
  don't already have it (many do), when that's merged these warnings
  will go away"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_pci: restore module attributes
  mic/host: fix up virtio 1.0 APIs
  vringh: update for virtio 1.0 APIs
  vringh: 64 bit features
  tools/virtio: add virtio 1.0 in vringh_test
  tools/virtio: add virtio 1.0 in virtio_test
  tools/virtio: enable -Werror
  tools/virtio: 64 bit features
  tools/virtio: fix vringh test
  tools/virtio: more stubs
  virtio: core support for config generation
  virtio_pci: add VIRTIO_PCI_NO_LEGACY
  virtio_pci: move probe to common file
  virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY
  virtio_config: fix virtio_cread_bytes
  virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore
2014-12-18 20:50:30 -08:00
Michael S. Tsirkin 8a38f339b6 mic/host: fix up virtio 1.0 APIs
This just makes code sparse-clean by using
new memory access APIs in one file I missed.
The new feature bit is not yet negotiated.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-15 23:50:40 +02:00
Linus Torvalds 6ae840e7cc Char/Misc driver patches for 3.19-rc1
Here's the big char/misc driver update for 3.19-rc1
 
 Lots of little things all over the place in different drivers, and a new
 subsystem, "coresight" has been added.  Full details are in the
 shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSODosACgkQMUfUDdst+ykSNwCfcqx1Z3rQzbLwSrR2sa1fV3Zb
 yEAAniJoLZ4ZkoQK4/1ozsFc31q+gXNm
 =/epr
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here's the big char/misc driver update for 3.19-rc1

  Lots of little things all over the place in different drivers, and a
  new subsystem, "coresight" has been added.  Full details are in the
  shortlog"

* tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits)
  parport: parport_pc, do not remove parent devices early
  spmi: Remove shutdown/suspend/resume kernel-doc
  carma-fpga-program: drop videobuf dependency
  carma-fpga: drop videobuf dependency
  carma-fpga-program.c: fix compile errors
  i8k: Fix temperature bug handling in i8k_get_temp()
  cxl: Name interrupts in /proc/interrupt
  CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  coresight-replicator: remove .owner field for driver
  coresight: fixed comments in coresight.h
  coresight: fix typo in comment in coresight-priv.h
  coresight: bindings for coresight drivers
  coresight: Adding ABI documentation
  w1: support auto-load of w1_bq27000 module.
  w1: avoid potential u16 overflow
  cn: verify msg->len before making callback
  mei: export fw status registers through sysfs
  mei: read and print all six FW status registers
  mei: txe: add cherrytrail device id
  mei: kill cached host and me csr values
  ...
2014-12-14 16:43:47 -08:00
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Linus Torvalds 96895199c8 Merge branch 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "For 3.19, the I2C subsystem has to offer special candy this time.
  Right in time for Christmas :)

   - I2C slave framework: finally, a generic mechanism for Linux being
     an I2C slave (if the bus driver supports that).  Docs are still
     missing but will come later this cycle, the code is good enough to
     go.
   - I2C muxes represent their topology in sysfs much more detailed.
     This will help users to navigate around much easier.
   - irq population of i2c clients is now done at probe time, not device
     creation time, to have better support for deferred probing.
   - new drivers for Imagination SCB, Amlogic Meson
   - DMA support added for Freescale IMX, Renesas SHMobile
   - slightly bigger driver updates to OMAP, i801, AT91, and rk3x
     (mostly quirk handling, timing updates, and using better kernel
     interfaces)
   - eeprom driver can now write with byte-access (very slow, but OK to
     have)
   - and the bunch of smaller fixes, cleanups, ID updates..."

* 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (56 commits)
  i2c: sh_mobile: remove unneeded DMA mask
  i2c: rcar: add slave support
  i2c: slave-eeprom: add eeprom simulator driver
  i2c: core changes for slave support
  MAINTAINERS: add I2C dt bindings also to I2C realm
  i2c: designware: Fix falling time bindings doc
  i2c: davinci: switch to use platform_get_irq
  Documentation: i2c: Use PM ops instead of legacy suspend/resume
  i2c: sh_mobile: optimize irq entry
  i2c: pxa: add support for SCCB devices
  omap: i2c: don't check bus state IP rev3.3 and earlier
  i2c: s3c2410: Handle i2c sys_cfg register in i2c driver
  i2c: rk3x: add Kconfig dependency on COMMON_CLK
  i2c: omap: add notes related to i2c multimaster mode
  i2c: omap: don't reset controller if Arbitration Lost detected
  i2c: omap: implement workaround for handling invalid BB-bit values
  i2c: omap: cleanup register definitions
  i2c: rk3x: handle dynamic clock rate changes correctly
  i2c: at91: enable probe deferring on dma channel request
  i2c: at91: remove legacy DMA support
  ...
2014-12-14 12:54:40 -08:00
Ian Munsie b123429e6a cxl: Unmap MMIO regions when detaching a context
If we need to force detach a context (e.g. due to EEH or simply force
unbinding the driver) we should prevent the userspace contexts from
being able to access the Problem State Area MMIO region further, which
they may have mapped with mmap().

This patch unmaps any mapped MMIO regions when detaching a userspace
context.

Cc: stable@vger.kernel.org
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-12 13:06:48 +11:00
Ian Munsie a98e6e9f4e cxl: Add timeout to process element commands
In the event that something goes wrong in the hardware and it is unable
to complete a process element comment we would end up polling forever,
effectively making the associated process unkillable.

This patch adds a timeout to the process element command code path, so
that we will give up if the hardware does not respond in a reasonable
time.

Cc: stable@vger.kernel.org
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-12 13:06:47 +11:00
Ian Munsie ee41d11d53 cxl: Change contexts_lock to a mutex to fix sleep while atomic bug
We had a known sleep while atomic bug if a CXL device was forcefully
unbound while it was in use. This could occur as a result of EEH, or
manually induced with something like this while the device was in use:

echo 0000:01:00.0 > /sys/bus/pci/drivers/cxl-pci/unbind

The issue was that in this code path we iterated over each context and
forcefully detached it with the contexts_lock spin lock held, however
the detach also needed to take the spu_mutex, and call schedule.

This patch changes the contexts_lock to a mutex so that we are not in
atomic context while doing the detach, thereby avoiding the sleep while
atomic.

Also delete the related TODO comment, which suggested an alternate
solution which turned out to not be workable.

Cc: stable@vger.kernel.org
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-12 13:06:47 +11:00
Linus Torvalds 140cd7fb04 powerpc updates for 3.19
Some nice cleanups like removing bootmem, and removal of __get_cpu_var().
 
 There is one patch to mm/gup.c. This is the generic GUP implementation, but is
 only used by us and arm(64). We have an ack from Steve Capper, and although we
 didn't get an ack from Andrew he told us to take the patch through the powerpc
 tree.
 
 There's one cxl patch. This is in drivers/misc, but Greg said he was happy for
 us to manage fixes for it.
 
 There is an infrastructure patch to support an IPMI driver for OPAL. That patch
 also appears in Corey Minyard's IPMI tree, you may see a conflict there.
 
 There is also an RTC driver for OPAL. We weren't able to get any response from
 the RTC maintainer, Alessandro Zummo, so in the end we just merged the driver.
 
 The usual batch of Freescale updates from Scott.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUiSTSAAoJEFHr6jzI4aWAirQP/3rIEng0LzLu5kW2zkGylIaM
 SNDum1vze3mHiTFl+CFcSIGpC1UEULoB49HA+2oE/ExKpIceG6lpL2LP+wNh2FW5
 mozjMjS6mZt4w1Fu1D2ZtgQc3O1T1pxkqsnZmPa8gVf5k5d5IQNPY6yB0pgVWwbV
 gwBKxe4VwPAzJjppE9i9MDhNTJwmHZq0lI8XuoTXOOU/f+4G1WxmjrbyveQ7cRP5
 i/sq2cKjxpWA+KDeIXo0GR0DpXR7qMeAvFX5xXY7oKuUJIFDM4kSHfmMYP6qLf5c
 2vlsJqHVqfOgQdve41z1ooaPzNtg7ezVo+VqqguSgtSgwy2JUo/uHpnzz3gD1Olo
 AP5+6xj8LZac0rTPxF4n4Hoyrp7AaaFjEFt1zqT9PWniZW4B41wtia0QORBNUf1S
 UEmKAC9T3WZJ47mH7WMSadtOPF9E3Yd/zuiPD4udtptCNKPbr6/k1MpJPIW2D4Rn
 BJ0QZTRd7V0yRofXxZtHxaMxq8pWd/Tip7J/zr/ghz+ulnH8BuFamuhCCLuJlESU
 +A2PMfuseyTMpH9sMAmmTwSGPDKjaUFWvmFvY/n88NZL7r2LlomNrDWFSSQOIHUP
 FxjYmjUMpZeexsfyRdgFV/INhYC3o3cso2fRGO45YK6nkxNnjNFEBS6WhQLvNLBu
 sknd1WjXkuJtoMC15SrQ
 =jvyT
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:
 "Some nice cleanups like removing bootmem, and removal of
  __get_cpu_var().

  There is one patch to mm/gup.c.  This is the generic GUP
  implementation, but is only used by us and arm(64).  We have an ack
  from Steve Capper, and although we didn't get an ack from Andrew he
  told us to take the patch through the powerpc tree.

  There's one cxl patch.  This is in drivers/misc, but Greg said he was
  happy for us to manage fixes for it.

  There is an infrastructure patch to support an IPMI driver for OPAL.

  There is also an RTC driver for OPAL.  We weren't able to get any
  response from the RTC maintainer, Alessandro Zummo, so in the end we
  just merged the driver.

  The usual batch of Freescale updates from Scott"

* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
  powerpc/powernv: Return to cpu offline loop when finished in KVM guest
  powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
  powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
  powerpc/xmon: Cleanup the breakpoint flags
  powerpc/xmon: Enable HW instruction breakpoint on POWER8
  powerpc/mm/thp: Use tlbiel if possible
  powerpc/mm/thp: Remove code duplication
  powerpc/mm/hugetlb: Sanity check gigantic hugepage count
  powerpc/oprofile: Disable pagefaults during user stack read
  powerpc/mm: Check for matching hpte without taking hpte lock
  powerpc: Drop useless warning in eeh_init()
  powerpc/powernv: Cleanup unused MCE definitions/declarations.
  powerpc/eeh: Dump PHB diag-data early
  powerpc/eeh: Recover EEH error on ownership change for BCM5719
  powerpc/eeh: Set EEH_PE_RESET on PE reset
  powerpc/eeh: Refactor eeh_reset_pe()
  powerpc: Remove more traces of bootmem
  powerpc/pseries: Initialise nvram_pstore_info's buf_lock
  cxl: Name interrupts in /proc/interrupt
  cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  ...
2014-12-11 17:48:14 -08:00
Linus Torvalds 70e71ca0af Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) New offloading infrastructure and example 'rocker' driver for
    offloading of switching and routing to hardware.

    This work was done by a large group of dedicated individuals, not
    limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
    Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu

 2) Start making the networking operate on IOV iterators instead of
    modifying iov objects in-situ during transfers.  Thanks to Al Viro
    and Herbert Xu.

 3) A set of new netlink interfaces for the TIPC stack, from Richard
    Alpe.

 4) Remove unnecessary looping during ipv6 routing lookups, from Martin
    KaFai Lau.

 5) Add PAUSE frame generation support to gianfar driver, from Matei
    Pavaluca.

 6) Allow for larger reordering levels in TCP, which are easily
    achievable in the real world right now, from Eric Dumazet.

 7) Add a variable of napi_schedule that doesn't need to disable cpu
    interrupts, from Eric Dumazet.

 8) Use a doubly linked list to optimize neigh_parms_release(), from
    Nicolas Dichtel.

 9) Various enhancements to the kernel BPF verifier, and allow eBPF
    programs to actually be attached to sockets.  From Alexei
    Starovoitov.

10) Support TSO/LSO in sunvnet driver, from David L Stevens.

11) Allow controlling ECN usage via routing metrics, from Florian
    Westphal.

12) Remote checksum offload, from Tom Herbert.

13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
    driver, from Thomas Lendacky.

14) Add MPLS support to openvswitch, from Simon Horman.

15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
    Klassert.

16) Do gro flushes on a per-device basis using a timer, from Eric
    Dumazet.  This tries to resolve the conflicting goals between the
    desired handling of bulk vs.  RPC-like traffic.

17) Allow userspace to ask for the CPU upon what a packet was
    received/steered, via SO_INCOMING_CPU.  From Eric Dumazet.

18) Limit GSO packets to half the current congestion window, from Eric
    Dumazet.

19) Add a generic helper so that all drivers set their RSS keys in a
    consistent way, from Eric Dumazet.

20) Add xmit_more support to enic driver, from Govindarajulu
    Varadarajan.

21) Add VLAN packet scheduler action, from Jiri Pirko.

22) Support configurable RSS hash functions via ethtool, from Eyal
    Perry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
  Fix race condition between vxlan_sock_add and vxlan_sock_release
  net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
  net/mlx4: Add support for A0 steering
  net/mlx4: Refactor QUERY_PORT
  net/mlx4_core: Add explicit error message when rule doesn't meet configuration
  net/mlx4: Add A0 hybrid steering
  net/mlx4: Add mlx4_bitmap zone allocator
  net/mlx4: Add a check if there are too many reserved QPs
  net/mlx4: Change QP allocation scheme
  net/mlx4_core: Use tasklet for user-space CQ completion events
  net/mlx4_core: Mask out host side virtualization features for guests
  net/mlx4_en: Set csum level for encapsulated packets
  be2net: Export tunnel offloads only when a VxLAN tunnel is created
  gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
  cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
  net: fec: only enable mdio interrupt before phy device link up
  net: fec: clear all interrupt events to support i.MX6SX
  net: fec: reset fep link status in suspend function
  net: sock: fix access via invalid file descriptor
  net: introduce helper macro for_each_cmsghdr
  ...
2014-12-11 14:27:06 -08:00
Linus Torvalds 6b9e2cea42 virtio: virtio 1.0 support, misc patches
This adds a lot of infrastructure for virtio 1.0 support.
 Notable missing pieces: virtio pci, virtio balloon (needs spec extension),
 vhost scsi.
 
 Plus, there are some minor fixes in a couple of places.
 
 Cc: David Miller <davem@davemloft.net>
 Cc: Rusty Russell <rusty@rustcorp.com.au>
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUh1CVAAoJECgfDbjSjVRpWZcH/2+EGPyng7Lca820UHA0cU1U
 u4D8CAAwOGaVdnUUo8ox1eon3LNB2UgRtgsl3rBDR3YTgFfNPrfuYdnHO0dYIDc1
 lS26NuPrVrTX0lA+OBPe2nlKrsrOkn8aw1kxG9Y0gKtNg/+HAGNW5e2eE7R/LrA5
 94XbWZ8g9Yf4GPG1iFmih9vQvvN0E68zcUlojfCnllySgaIEYr8nTiGQBWpRgJat
 fCqFAp1HMDZzGJQO+m1/Vw0OftTRVybyfai59e6uUTa8x1djvzPb/1MvREqQjegM
 ylSuofIVyj7JPu++FbAjd9mikkb53GSc8ql3YmWNZLdr69rnkzP0GdzQvrdheAo=
 =RtrR
 -----END PGP SIGNATURE-----

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

Pull virtio updates from Michael Tsirkin:
 "virtio: virtio 1.0 support, misc patches

  This adds a lot of infrastructure for virtio 1.0 support.  Notable
  missing pieces: virtio pci, virtio balloon (needs spec extension),
  vhost scsi.

  Plus, there are some minor fixes in a couple of places.

  Note: some net drivers are affected by these patches.  David said he's
  fine with merging these patches through my tree.

  Rusty's on vacation, he acked using my tree for these, too"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits)
  virtio_ccw: finalize_features error handling
  virtio_ccw: future-proof finalize_features
  virtio_pci: rename virtio_pci -> virtio_pci_common
  virtio_pci: update file descriptions and copyright
  virtio_pci: split out legacy device support
  virtio_pci: setup config vector indirectly
  virtio_pci: setup vqs indirectly
  virtio_pci: delete vqs indirectly
  virtio_pci: use priv for vq notification
  virtio_pci: free up vq->priv
  virtio_pci: fix coding style for structs
  virtio_pci: add isr field
  virtio: drop legacy_only driver flag
  virtio_balloon: drop legacy_only driver flag
  virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1
  virtio: allow finalize_features to fail
  virtio_ccw: legacy: don't negotiate rev 1/features
  virtio: add API to detect legacy devices
  virtio_console: fix sparse warnings
  vhost: remove unnecessary forward declarations in vhost.h
  ...
2014-12-11 12:20:31 -08:00
Linus Torvalds 92a578b064 ACPI and power management updates for 3.19-rc1
This time we have some more new material than we used to have during
 the last couple of development cycles.
 
 The most important part of it to me is the introduction of a unified
 interface for accessing device properties provided by platform
 firmware.  It works with Device Trees and ACPI in a uniform way and
 drivers using it need not worry about where the properties come
 from as long as the platform firmware (either DT or ACPI) makes
 them available.  It covers both devices and "bare" device node
 objects without struct device representation as that turns out to
 be necessary in some cases.  This has been in the works for quite
 a few months (and development cycles) and has been approved by
 all of the relevant maintainers.
 
 On top of that, some drivers are switched over to the new interface
 (at25, leds-gpio, gpio_keys_polled) and some additional changes are
 made to the core GPIO subsystem to allow device drivers to manipulate
 GPIOs in the "canonical" way on platforms that provide GPIO information
 in their ACPI tables, but don't assign names to GPIO lines (in which
 case the driver needs to do that on the basis of what it knows about
 the device in question).  That also has been approved by the GPIO
 core maintainers and the rfkill driver is now going to use it.
 
 Second is support for hardware P-states in the intel_pstate driver.
 It uses CPUID to detect whether or not the feature is supported by
 the processor in which case it will be enabled by default.  However,
 it can be disabled entirely from the kernel command line if necessary.
 
 Next is support for a platform firmware interface based on ACPI
 operation regions used by the PMIC (Power Management Integrated
 Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms.
 That interface is used for manipulating power resources and for
 thermal management: sensor temperature reporting, trip point setting
 and so on.
 
 Also the ACPI core is now going to support the _DEP configuration
 information in a limited way.  Basically, _DEP it supposed to reflect
 off-the-hierarchy dependencies between devices which may be very
 indirect, like when AML for one device accesses locations in an
 operation region handled by another device's driver (usually, the
 device depended on this way is a serial bus or GPIO controller).
 The support added this time is sufficient to make the ACPI battery
 driver work on Asus T100A, but it is general enough to be able to
 cover some other use cases in the future.
 
 Finally, we have a new cpufreq driver for the Loongson1B processor.
 
 In addition to the above, there are fixes and cleanups all over the
 place as usual and a traditional ACPICA update to a recent upstream
 release.
 
 As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver
 for Intel platforms should be able to handle power management of
 the DMA engine correctly, the cpufreq-dt driver should interact
 with the thermal subsystem in a better way and the ACPI backlight
 driver should handle some more corner cases, among other things.
 
 On top of the ACPICA update there are fixes for race conditions
 in the ACPICA's interrupt handling code which might lead to some
 random and strange looking failures on some systems.
 
 In the cleanups department the most visible part is the series
 of commits targeted at getting rid of the CONFIG_PM_RUNTIME
 configuration option.  That was triggered by a discussion
 regarding the generic power domains code during which we realized
 that trying to support certain combinations of PM config options
 was painful and not really worth it, because nobody would use them
 in production anyway.  For this reason, we decided to make
 CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the
 conclusion that the latter became redundant and CONFIG_PM could
 be used instead of it.  The material here makes that replacement
 in a major part of the tree, but there will be at least one more
 batch of that in the second part of the merge window.
 
 Specifics:
 
  - Support for retrieving device properties information from ACPI
    _DSD device configuration objects and a unified device properties
    interface for device drivers (and subsystems) on top of that.
    As stated above, this works with Device Trees and ACPI and allows
    device drivers to be written in a platform firmware (DT or ACPI)
    agnostic way.  The at25, leds-gpio and gpio_keys_polled drivers
    are now going to use this new interface and the GPIO subsystem
    is additionally modified to allow device drivers to assign names
    to GPIO resources returned by ACPI _CRS objects (in case _DSD is
    not present or does not provide the expected data).  The changes
    in this set are mostly from Mika Westerberg, Rafael J Wysocki,
    Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam,
    Geert Uytterhoeven).
 
  - Support for Hardware Managed Performance States (HWP) as described
    in Volume 3, section 14.4, of the Intel SDM in the intel_pstate
    driver.  CPUID is used to detect whether or not the feature is
    supported by the processor.  If supported, it will be enabled
    automatically unless the intel_pstate=no_hwp switch is present in
    the kernel command line.  From Dirk Brandewie.
 
  - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie).
 
  - Support for firmware interface based on ACPI operation regions
    used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR
    platforms for power resource control and thermal management
    (Aaron Lu).
 
  - Limited support for retrieving off-the-hierarchy dependencies
    between devices from ACPI _DEP device configuration objects
    and deferred probing support for the ACPI battery driver based
    on the _DEP information to make that driver work on Asus T100A
    (Lan Tianyu).
 
  - New cpufreq driver for the Loongson1B processor (Kelvin Cheung).
 
  - ACPICA update to upstream revision 20141107 which only affects
    tools (Bob Moore).
 
  - Fixes for race conditions in the ACPICA's interrupt handling
    code and in the ACPI code related to system suspend and resume
    (Lv Zheng and Rafael J Wysocki).
 
  - ACPI core fix for an RCU-related issue in the ioremap() regions
    management code that slowed down significantly after CPUs had
    been allowed to enter idle states even if they'd had RCU callbakcs
    queued and triggered some problems in certain proprietary graphics
    driver (and elsewhere).  The fix replaces synchronize_rcu() in
    that code with synchronize_rcu_expedited() which makes the issue
    go away.  From Konstantin Khlebnikov.
 
  - ACPI LPSS (Low-Power Subsystem) driver fix to handle power
    management of the DMA engine included into the LPSS correctly.
    The problem is that the DMA engine doesn't have ACPI PM support
    of its own and it simply is turned off when the last LPSS device
    having ACPI PM support goes into D3cold.  To work around that,
    the PM domain used by the ACPI LPSS driver is redesigned so at
    least one device with ACPI PM support will be on as long as the
    DMA engine is in use.  From Andy Shevchenko.
 
  - ACPI backlight driver fix to avoid using it on "Win8-compatible"
    systems where it doesn't work and where it was used by default by
    mistake (Aaron Lu).
 
  - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki,
    Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and
    Ashwin Chaugule (mostly related to the upcoming ARM64 support).
 
  - Intel RAPL (Running Average Power Limit) power capping driver
    fixes and improvements including new processor IDs (Jacob Pan).
 
  - Generic power domains modification to power up domains after
    attaching devices to them to meet the expectations of device
    drivers and bus types assuming devices to be accessible at
    probe time (Ulf Hansson).
 
  - Preliminary support for controlling device clocks from the
    generic power domains core code and modifications of the
    ARM/shmobile platform to use that feature (Ulf Hansson).
 
  - Assorted minor fixes and cleanups of the generic power
    domains core code (Ulf Hansson, Geert Uytterhoeven).
 
  - Assorted minor fixes and cleanups of the device clocks control
    code in the PM core (Geert Uytterhoeven, Grygorii Strashko).
 
  - Consolidation of device power management Kconfig options by making
    CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter
    which is now redundant (Rafael J Wysocki and Kevin Hilman).  That
    is the first batch of the changes needed for this purpose.
 
  - Core device runtime power management support code cleanup related
    to the execution of callbacks (Andrzej Hajda).
 
  - cpuidle ARM support improvements (Lorenzo Pieralisi).
 
  - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and
    a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and
    Bartlomiej Zolnierkiewicz).
 
  - New cpufreq driver callback (->ready) to be executed when the
    cpufreq core is ready to use a given policy object and cpufreq-dt
    driver modification to use that callback for cooling device
    registration (Viresh Kumar).
 
  - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu,
    James Geboski, Tomeu Vizoso).
 
  - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate,
    cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao,
    Stefan Wahren, Petr Cvek).
 
  - OPP (Operating Performance Points) framework modification to
    allow OPPs to be removed too and update of a few cpufreq drivers
    (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added
    during initialization) on driver removal (Viresh Kumar).
 
  - Hibernation core fixes and cleanups (Tina Ruchandani and
    Markus Elfring).
 
  - PM Kconfig fix related to CPU power management (Pankaj Dubey).
 
  - cpupower tool fix (Prarit Bhargava).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUhj6JAAoJEILEb/54YlRxTM4P/j5g5SfqvY0QKsn7sR7MGZ6v
 nsgCBhJAqTw3ocNC7EAs8z9h2GWy1KbKpakKYWAh9Fs1yZoey7tFSlcv/Rgjlp70
 uU5sDQHtpE9mHKiymdsowiQuWgpl962L4k+k8hUslhlvgk1PvVbpajR6OqG8G+pD
 asuIW9eh1APNkLyXmRJ3ZPomzs0VmRdZJ0NEs0lKX9mJskqEvxPIwdaxq3iaJq9B
 Fo0J345zUDcJnxWblDRdHlOigCimglElfN5qJwaC4KpwUKuBvLRKbp4f69+wfT0c
 kYFiR29X5KjJ2kLfP/wKsLyuDCYYXRq3tCia5M1tAqOjZ+UA89H/GDftx/5lntmv
 qUlBa35VfdS1SX4HyApZitOHiLgo+It/hl8Z9bJnhyVw66NxmMQ8JYN2imb8Lhqh
 XCLR7BxLTah82AapLJuQ0ZDHPzZqMPG2veC2vAzRMYzVijict/p4Y2+qBqONltER
 4rs9uRVn+hamX33lCLg8BEN8zqlnT3rJFIgGaKjq/wXHAU/zpE9CjOrKMQcAg9+s
 t51XMNPwypHMAYyGVhEL89ImjXnXxBkLRuquhlmEpvQchIhR+mR3dLsarGn7da44
 WPIQJXzcsojXczcwwfqsJCR4I1FTFyQIW+UNh02GkDRgRovQqo+Jk762U7vQwqH+
 LBdhvVaS1VW4v+FWXEoZ
 =5dox
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "This time we have some more new material than we used to have during
  the last couple of development cycles.

  The most important part of it to me is the introduction of a unified
  interface for accessing device properties provided by platform
  firmware.  It works with Device Trees and ACPI in a uniform way and
  drivers using it need not worry about where the properties come from
  as long as the platform firmware (either DT or ACPI) makes them
  available.  It covers both devices and "bare" device node objects
  without struct device representation as that turns out to be necessary
  in some cases.  This has been in the works for quite a few months (and
  development cycles) and has been approved by all of the relevant
  maintainers.

  On top of that, some drivers are switched over to the new interface
  (at25, leds-gpio, gpio_keys_polled) and some additional changes are
  made to the core GPIO subsystem to allow device drivers to manipulate
  GPIOs in the "canonical" way on platforms that provide GPIO
  information in their ACPI tables, but don't assign names to GPIO lines
  (in which case the driver needs to do that on the basis of what it
  knows about the device in question).  That also has been approved by
  the GPIO core maintainers and the rfkill driver is now going to use
  it.

  Second is support for hardware P-states in the intel_pstate driver.
  It uses CPUID to detect whether or not the feature is supported by the
  processor in which case it will be enabled by default.  However, it
  can be disabled entirely from the kernel command line if necessary.

  Next is support for a platform firmware interface based on ACPI
  operation regions used by the PMIC (Power Management Integrated
  Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms.
  That interface is used for manipulating power resources and for
  thermal management: sensor temperature reporting, trip point setting
  and so on.

  Also the ACPI core is now going to support the _DEP configuration
  information in a limited way.  Basically, _DEP it supposed to reflect
  off-the-hierarchy dependencies between devices which may be very
  indirect, like when AML for one device accesses locations in an
  operation region handled by another device's driver (usually, the
  device depended on this way is a serial bus or GPIO controller).  The
  support added this time is sufficient to make the ACPI battery driver
  work on Asus T100A, but it is general enough to be able to cover some
  other use cases in the future.

  Finally, we have a new cpufreq driver for the Loongson1B processor.

  In addition to the above, there are fixes and cleanups all over the
  place as usual and a traditional ACPICA update to a recent upstream
  release.

  As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for
  Intel platforms should be able to handle power management of the DMA
  engine correctly, the cpufreq-dt driver should interact with the
  thermal subsystem in a better way and the ACPI backlight driver should
  handle some more corner cases, among other things.

  On top of the ACPICA update there are fixes for race conditions in the
  ACPICA's interrupt handling code which might lead to some random and
  strange looking failures on some systems.

  In the cleanups department the most visible part is the series of
  commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration
  option.  That was triggered by a discussion regarding the generic
  power domains code during which we realized that trying to support
  certain combinations of PM config options was painful and not really
  worth it, because nobody would use them in production anyway.  For
  this reason, we decided to make CONFIG_PM_SLEEP select
  CONFIG_PM_RUNTIME and that lead to the conclusion that the latter
  became redundant and CONFIG_PM could be used instead of it.  The
  material here makes that replacement in a major part of the tree, but
  there will be at least one more batch of that in the second part of
  the merge window.

  Specifics:

   - Support for retrieving device properties information from ACPI _DSD
     device configuration objects and a unified device properties
     interface for device drivers (and subsystems) on top of that.  As
     stated above, this works with Device Trees and ACPI and allows
     device drivers to be written in a platform firmware (DT or ACPI)
     agnostic way.  The at25, leds-gpio and gpio_keys_polled drivers are
     now going to use this new interface and the GPIO subsystem is
     additionally modified to allow device drivers to assign names to
     GPIO resources returned by ACPI _CRS objects (in case _DSD is not
     present or does not provide the expected data).  The changes in
     this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron
     Lu, and Darren Hart with some fixes from others (Fabio Estevam,
     Geert Uytterhoeven).

   - Support for Hardware Managed Performance States (HWP) as described
     in Volume 3, section 14.4, of the Intel SDM in the intel_pstate
     driver.  CPUID is used to detect whether or not the feature is
     supported by the processor.  If supported, it will be enabled
     automatically unless the intel_pstate=no_hwp switch is present in
     the kernel command line.  From Dirk Brandewie.

   - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie).

   - Support for firmware interface based on ACPI operation regions used
     by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR
     platforms for power resource control and thermal management (Aaron
     Lu).

   - Limited support for retrieving off-the-hierarchy dependencies
     between devices from ACPI _DEP device configuration objects and
     deferred probing support for the ACPI battery driver based on the
     _DEP information to make that driver work on Asus T100A (Lan
     Tianyu).

   - New cpufreq driver for the Loongson1B processor (Kelvin Cheung).

   - ACPICA update to upstream revision 20141107 which only affects
     tools (Bob Moore).

   - Fixes for race conditions in the ACPICA's interrupt handling code
     and in the ACPI code related to system suspend and resume (Lv Zheng
     and Rafael J Wysocki).

   - ACPI core fix for an RCU-related issue in the ioremap() regions
     management code that slowed down significantly after CPUs had been
     allowed to enter idle states even if they'd had RCU callbakcs
     queued and triggered some problems in certain proprietary graphics
     driver (and elsewhere).  The fix replaces synchronize_rcu() in that
     code with synchronize_rcu_expedited() which makes the issue go
     away.  From Konstantin Khlebnikov.

   - ACPI LPSS (Low-Power Subsystem) driver fix to handle power
     management of the DMA engine included into the LPSS correctly.  The
     problem is that the DMA engine doesn't have ACPI PM support of its
     own and it simply is turned off when the last LPSS device having
     ACPI PM support goes into D3cold.  To work around that, the PM
     domain used by the ACPI LPSS driver is redesigned so at least one
     device with ACPI PM support will be on as long as the DMA engine is
     in use.  From Andy Shevchenko.

   - ACPI backlight driver fix to avoid using it on "Win8-compatible"
     systems where it doesn't work and where it was used by default by
     mistake (Aaron Lu).

   - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki,
     Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin
     Chaugule (mostly related to the upcoming ARM64 support).

   - Intel RAPL (Running Average Power Limit) power capping driver fixes
     and improvements including new processor IDs (Jacob Pan).

   - Generic power domains modification to power up domains after
     attaching devices to them to meet the expectations of device
     drivers and bus types assuming devices to be accessible at probe
     time (Ulf Hansson).

   - Preliminary support for controlling device clocks from the generic
     power domains core code and modifications of the ARM/shmobile
     platform to use that feature (Ulf Hansson).

   - Assorted minor fixes and cleanups of the generic power domains core
     code (Ulf Hansson, Geert Uytterhoeven).

   - Assorted minor fixes and cleanups of the device clocks control code
     in the PM core (Geert Uytterhoeven, Grygorii Strashko).

   - Consolidation of device power management Kconfig options by making
     CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter
     which is now redundant (Rafael J Wysocki and Kevin Hilman).  That
     is the first batch of the changes needed for this purpose.

   - Core device runtime power management support code cleanup related
     to the execution of callbacks (Andrzej Hajda).

   - cpuidle ARM support improvements (Lorenzo Pieralisi).

   - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a
     new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and
     Bartlomiej Zolnierkiewicz).

   - New cpufreq driver callback (->ready) to be executed when the
     cpufreq core is ready to use a given policy object and cpufreq-dt
     driver modification to use that callback for cooling device
     registration (Viresh Kumar).

   - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James
     Geboski, Tomeu Vizoso).

   - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate,
     cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao,
     Stefan Wahren, Petr Cvek).

   - OPP (Operating Performance Points) framework modification to allow
     OPPs to be removed too and update of a few cpufreq drivers
     (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added
     during initialization) on driver removal (Viresh Kumar).

   - Hibernation core fixes and cleanups (Tina Ruchandani and Markus
     Elfring).

   - PM Kconfig fix related to CPU power management (Pankaj Dubey).

   - cpupower tool fix (Prarit Bhargava)"

* tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits)
  i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tools: cpupower: fix return checks for sysfs_get_idlestate_count()
  drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
  MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  leds: leds-gpio: Fix multiple instances registration without 'label' property
  iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
  block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
  PM: Merge the SET*_RUNTIME_PM_OPS() macros
  ...
2014-12-10 21:17:00 -08:00
Linus Torvalds cbfe0de303 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS changes from Al Viro:
 "First pile out of several (there _definitely_ will be more).  Stuff in
  this one:

   - unification of d_splice_alias()/d_materialize_unique()

   - iov_iter rewrite

   - killing a bunch of ->f_path.dentry users (and f_dentry macro).

     Getting that completed will make life much simpler for
     unionmount/overlayfs, since then we'll be able to limit the places
     sensitive to file _dentry_ to reasonably few.  Which allows to have
     file_inode(file) pointing to inode in a covered layer, with dentry
     pointing to (negative) dentry in union one.

     Still not complete, but much closer now.

   - crapectomy in lustre (dead code removal, mostly)

   - "let's make seq_printf return nothing" preparations

   - assorted cleanups and fixes

  There _definitely_ will be more piles"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  copy_from_iter_nocache()
  new helper: iov_iter_kvec()
  csum_and_copy_..._iter()
  iov_iter.c: handle ITER_KVEC directly
  iov_iter.c: convert copy_to_iter() to iterate_and_advance
  iov_iter.c: convert copy_from_iter() to iterate_and_advance
  iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
  iov_iter.c: convert iov_iter_zero() to iterate_and_advance
  iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
  iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
  iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
  iov_iter.c: iterate_and_advance
  iov_iter.c: macros for iterating over iov_iter
  kill f_dentry macro
  dcache: fix kmemcheck warning in switch_names
  new helper: audit_file()
  nfsd_vfs_write(): use file_inode()
  ncpfs: use file_inode()
  kill f_dentry uses
  lockd: get rid of ->f_path.dentry->d_sb
  ...
2014-12-10 16:10:49 -08:00
Linus Torvalds 6c9e92476b ARM: SoC cleanups for 3.19
The remaining cleanups for 3.19 are to a large part result of
 devicetree conversion nearing completion on two other platforms
 besides AT91:
 
 * Like AT91, Renesas shmobile is in the process to migrate to DT and
   multiplatform, but using a different approach of doing it one
   SoC at a time. For 3.19, the r8a7791 platform and associated\
   "Koelsch" board are considered complete and we remove the non-DT
   non-multiplatform support for this.
 
 * The ARM Versatile Express has supported DT and multiplatform
   for a long time, but we have still kept the legacy board files
   around, because not all drivers were fully working before. We
   have finally taken the last step to remove the board files.
 
 Other changes in this branch are preparation for the later branches
 or just unrelated to the more interesting changes:
 * The dts files for arm64 get moved into per-vendor directories for
   a clearer structure.
 * Some dead code removal (zynq, exynos, davinci, imx)
 * Using pr_*() macros more consistently instead of printk(KERN_*)
   in some platform code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVIdpgGCrR//JCVInAQIr/BAA3UZvPPf5dwy5OkULPTghvWueeL9NWZHr
 8KwNWIIkIzCgr8zUf2HrMRRLtG429WQWHWxNA+TH9HpcHFGo/zJDBPaJ63cb3Rv1
 YLDGJ0zYPXjOsiWUWHm2M5B4hWj0Is5CwYnuozcpLykzQ9QsLMTIv2CAXoJXpH9S
 sAdx/B5e9G7IqzlJRgbvCPNAZleLYUneYoIW5L68MaFIjfKXVrHzY6w0CJFt/UDa
 CVbP0iwVQNnL1Opr3ABAkBkJ7rrFU17jpBWMtrNsyyMCZQADiV5Z4+IBnW0uWSZj
 zn92dycwOSYRmrgOrI2J6r5vFtxWRyWfR5Au5rD02oQTIucGiLmaKMV5gNhoQrEq
 v53IknDZzqv+xbiARGnJKGdJs70AYjrurpNgXXzJt3W4dZ6vssotxhiYEXbpPPDN
 v5QxrOStePY+qBHeMLuQi8VoV9SI+j/YAiaXak4QWmiGHVDzvBfZ2P3wMCbj04Jp
 oxCZ6IGMczYwvqQ8vWXJOueLm+IfM0GcEFwslUwO95rMRMv7JRCXdvfNhL7wLlu8
 f2Hd/Pk/u0bOUQXhZlFKNRFg78t4hgD1hMKHgmpEDTZ8P1XMuIrWoQu0xkSQZsYG
 MiGIqwRd5Ow9OWzWq3DNJ4EjhmvPYv2X/Dcvu7Jv4yq1zZQ8G6OnWkmWWn5ghq6M
 grvB27RnbuE=
 =Apdh
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "The remaining cleanups for 3.19 are to a large part result of
  devicetree conversion nearing completion on two other platforms
  besides AT91:

   - Like AT91, Renesas shmobile is in the process to migrate to DT and
     multiplatform, but using a different approach of doing it one SoC
     at a time.  For 3.19, the r8a7791 platform and associated "Koelsch"
     board are considered complete and we remove the non-DT
     non-multiplatform support for this.

   - The ARM Versatile Express has supported DT and multiplatform for a
     long time, but we have still kept the legacy board files around,
     because not all drivers were fully working before.  We have finally
     taken the last step to remove the board files.

  Other changes in this branch are preparation for the later branches or
  just unrelated to the more interesting changes:

   - The dts files for arm64 get moved into per-vendor directories for a
     clearer structure.

   - Some dead code removal (zynq, exynos, davinci, imx)

   - Using pr_*() macros more consistently instead of printk(KERN_*) in
     some platform code"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits)
  ARM: zynq: Remove secondary_startup() declaration from header
  ARM: vexpress: Enable regulator framework when MMCI is in use
  ARM: vexpress: Remove non-DT code
  ARM: imx: Remove unneeded .map_io initialization
  ARM: dts: imx6qdl-sabresd: Fix the microphone route
  ARM: imx: refactor mxc_iomux_mode()
  ARM: imx: simplify clk_pllv3_prepare()
  ARM: imx6q: drop unnecessary semicolon
  ARM: imx: clean up machine mxc_arch_reset_init_dt reset init
  ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property
  ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define
  ARM: at91: remove useless init_time for DT-only SoCs
  ARM: davinci: Remove redundant casts
  ARM: davinci: Use standard logging styles
  ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/
  ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/
  ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/
  ARM: EXYNOS: Remove unused static iomapping
  ARM: at91: fix build breakage due to legacy board removals
  ...
2014-12-09 14:18:35 -08:00
Linus Torvalds 0563fdc0d9 ARM: SoC cleanup on mach-at91 for 3.19
On Atmel AT91, the conversion to device tree is now considered complete,
 and all machines that were not already converted in 3.18 are assumed to
 be unused and dropped by the maintainer.
 
 All remaining board files that were written in C are dropped, and the
 ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed
 altogether.  Cleaning up the last pieces was great fun, so I took the
 time to do some of the coding myself and removed several hundred code
 lines that ended up unused after the board files were done.
 
 There are still a couple of AT91 specific device drivers that are not
 converted to DT (CF, USB-OTG) and currently not working, and the platform
 itself is not "multiplatform"-enabled, but both issues are going to be
 taken care of in the 3.20 cycle.
 
 This is split out from the other cleanups purely based on the size
 of the branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iD8DBQBUhyNX5t5GS2LDRf4RAnjxAKCER7eoLNadu1/93n/a9d1nUz4MoQCcCZUq
 BolxCOi0wr4YTcQtp7rHzWI=
 =ykAB
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanup on mach-at91 from Arnd Bergmann:
 "On Atmel AT91, the conversion to device tree is now considered
  complete, and all machines that were not already converted in 3.18 are
  assumed to be unused and dropped by the maintainer.

  All remaining board files that were written in C are dropped, and the
  ancient at91x40 sub-platform (based on an MMU-less ARM7) is removed
  altogether.  Cleaning up the last pieces was great fun, so I took the
  time to do some of the coding myself and removed several hundred code
  lines that ended up unused after the board files were done.

  There are still a couple of AT91 specific device drivers that are not
  converted to DT (CF, USB-OTG) and currently not working, and the
  platform itself is not "multiplatform"-enabled, but both issues are
  going to be taken care of in the 3.20 cycle.

  This is split out from the other cleanups purely based on the size of
  the branch"

* tag 'at91-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: at91: remove unused board.h file
  ARM: at91: remove unneeded header files
  ARM: at91/clocksource: remove !DT PIT initializations
  ARM: at91: at91rm9200 ST initialization is now DT only
  ARM: at91: remove old AT91-specific drivers
  ARM: at91: cleanup initilisation code by removing dead code
  ARM: at91/Kconfig: select board files automatically
  ARM: at91: remove unused IRQ function declarations
  ARM: at91: remove legacy IRQ driver and related code
  ARM: at91: remove old at91-specific clock driver
  ARM: at91: remove clock data in at91sam9n12.c and at91sam9x5.c files
  ARM: at91: remove all !DT related configuration options
  ARM: at91/trivial: update Kconfig comment to mention SAMA5
  ARM: at91: always USE_OF from now on
  ARM: at91/Kconfig: remove ARCH_AT91RM9200 option for drivers
  ARM: at91: switch configuration option to SOC_AT91RM9200
  ARM: at91: remove at91rm9200 legacy board support
  ARM: at91: remove at91rm9200 legacy boards files
  ARM: at91/Kconfig: remove useless fbdev Kconfig options
  ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
  ...
2014-12-09 14:17:12 -08:00
Al Viro d838df2e5d vmci: propagate msghdr all way down to __qp_memcpy_from_queue()
... and switch it to memcpy_to_msg()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-09 16:28:23 -05:00
Michael S. Tsirkin 5c609a5ef0 virtio: allow finalize_features to fail
This will make it easy for transports to validate features and return
failure.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 16:32:32 +02:00
Michael S. Tsirkin 93d389f820 virtio: assert 32 bit features in transports
At this point, no transports set any of the high 32 feature bits.
Since transports generally can't (yet) cope with such bits, add BUG_ON
checks to make sure they are not set by mistake.

Based on rproc patch by Rusty.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin d025477368 virtio: add support for 64 bit features.
Change u32 to u64, and use BIT_ULL and 1ULL everywhere.

Note: transports are unchanged, and only set low 32 bit.
This guarantees that no transport sets e.g. VERSION_1
by mistake without proper support.

Based on patch by Rusty.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:24 +02:00
Michael S. Tsirkin 0ffaeadfc4 mic_virtio: robust feature array size calculation
mic reads sizeof(vdev->features) bits from device, but in fact it stores
bits in local features variable. use sizeof(features) to make code
robust against future changes extending sizeof(vdev->features).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09 12:05:23 +02:00
Michael S. Tsirkin e16e12be34 virtio: use u32, not bitmap for features
It seemed like a good idea to use bitmap for features
in struct virtio_device, but it's actually a pain,
and seems to become even more painful when we get more
than 32 feature bits.  Just change it to a u32 for now.

Based on patch by Rusty.

Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-09 12:05:23 +02:00
Al Viro ba00410b81 Merge branch 'iov_iter' into for-next 2014-12-08 20:39:29 -05:00
Rafael J. Wysocki e3d857e1ae Merge branch 'pm-runtime'
* pm-runtime: (25 commits)
  i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c
  dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME
  MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  hwrandom / exynos / PM: Use CONFIG_PM in #ifdef
  block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  USB / PM: Drop CONFIG_PM_RUNTIME from the USB core
  PM: Merge the SET*_RUNTIME_PM_OPS() macros
  PM / Kconfig: Do not select PM directly from Kconfig files
  PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core
  ...
2014-12-08 20:00:44 +01:00
Aneesh Kumar K.V aefa5688c0 powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
upatepp can get called for a nohpte fault when we find from the linux
page table that the translation was hashed before. In that case
we are sure that there is no existing translation, hence we could
avoid doing tlbie.

We could possibly race with a parallel fault filling the TLB. But
that should be ok because updatepp is only ever relaxing permissions.
We also look at linux pte permission bits when filling hash pte
permission bits. We also hold the linux pte busy bits while
inserting/updating a hashpte entry, hence a paralle update of
linux pte is not possible. On the other hand mprotect involves
ptep_modify_prot_start which cause a hpte invalidate and not updatepp.

Performance number:
We use randbox_access_bench written by Anton.

Kernel with THP disabled and smaller hash page table size.

    86.60%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_updatepp
     2.10%  random_access_b  random_access_bench              [.] doit
     1.99%  random_access_b  [kernel.kallsyms]                [k] .do_raw_spin_lock
     1.85%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_insert
     1.26%  random_access_b  [kernel.kallsyms]                [k] .native_flush_hash_range
     1.18%  random_access_b  [kernel.kallsyms]                [k] .__delay
     0.69%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_remove
     0.37%  random_access_b  [kernel.kallsyms]                [k] .clear_user_page
     0.34%  random_access_b  [kernel.kallsyms]                [k] .__hash_page_64K
     0.32%  random_access_b  [kernel.kallsyms]                [k] fast_exception_return
     0.30%  random_access_b  [kernel.kallsyms]                [k] .hash_page_mm

With Fix:

    27.54%  random_access_b  random_access_bench              [.] doit
    22.90%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_insert
     5.76%  random_access_b  [kernel.kallsyms]                [k] .native_hpte_remove
     5.20%  random_access_b  [kernel.kallsyms]                [k] fast_exception_return
     5.12%  random_access_b  [kernel.kallsyms]                [k] .__hash_page_64K
     4.80%  random_access_b  [kernel.kallsyms]                [k] .hash_page_mm
     3.31%  random_access_b  [kernel.kallsyms]                [k] data_access_common
     1.84%  random_access_b  [kernel.kallsyms]                [k] .trace_hardirqs_on_caller

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-05 16:26:15 +11:00
Rafael J. Wysocki bbd6d05075 misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/misc/.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-05 02:56:02 +01:00
Arnd Bergmann e155aee2b2 Third batch of cleanup/SoC for 3.19:
- fixes following legacy board removal
 - removal of legacy board support for at91sam9263, at91sam9260/at91sam9g20
   and at91sam9261/at91sam9g10 SoCs families. Please use DT now.
 - removal of some now useless Kconfig options
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJUde2JAAoJEAf03oE53VmQHDAH/Rx0Rym/iptsgtbYntLHa+x0
 isqP6LJFl8fxrAZLjNa5CerHNEgczvMzU/c9C9hSK5w9GA8zA586siNPxgPTGAVd
 ZAoWwBduZOPz2m0bdwtyPbJR/RO4/PYXqAFCUuWNmYyb0WSychiH7KT9iltJFjDw
 gHM3/W/jCxveAkGAY8BVC31HzL7Xxm3cU6wGGfuGbdt2HVvPKIH13TCTHpFtdaoI
 myNzQhQGIw9/ct4nirItYCeASXFJ2iP337hfKw/Hb72TD1JaqD0TnbD+KY31fB6L
 O30yJePtreN5yrWXFc6v7jS9gwbdw5maMUgDoG1ltT3a5jBSF3x6ia7S8v4+Gds=
 =MEDe
 -----END PGP SIGNATURE-----

Merge tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/cleanup

Pull "Third batch of cleanup/SoC for 3.19" from Nicolas Ferre:

- fixes following legacy board removal
- removal of legacy board support for at91sam9263, at91sam9260/at91sam9g20
  and at91sam9261/at91sam9g10 SoCs families. Please use DT now.
- removal of some now useless Kconfig options

* tag 'at91-cleanup3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/Kconfig: remove useless fbdev Kconfig options
  ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
  ARM: at91/Kconfig: remove unused config options
  ARM: at91: remove at91sam9260/at91sam9g20 legacy board support
  ARM: at91: remove at91sam9260/at91sam9g20 legacy boards files
  ARM: at91: remove at91sam9263 legacy board support
  ARM: at91/at91sam9g45: remove useless header file

Conflicts:
	arch/arm/mach-at91/at91sam9g45.c

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28 16:15:14 +01:00
Pawel Moll 81cc3f868d ARM: vexpress: Remove non-DT code
Now, with the CLCD DT support available, there is no
more reason to keep the non-DT support for V2P-CA9.

Removed, together with "some" supporting code. It was
necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
and selected by the machines still interested in it.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28 16:08:16 +01:00
Hans Verkuil 2180a0d41a carma-fpga-program: drop videobuf dependency
This driver abuses videobuf helper functions. This is a bad idea
because:

1) this driver is completely unrelated to media drivers
2) the videobuf API is deprecated and will be removed eventually

This patch replaces the videobuf functions with the normal DMA kernel
API.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:30:05 -08:00
Hans Verkuil 27361ff56d carma-fpga: drop videobuf dependency
This driver abuses videobuf helper functions. This is a bad idea
because:

1) this driver is completely unrelated to media drivers
2) the videobuf API is deprecated and will be removed eventually

This patch replaces the videobuf functions with the normal DMA kernel
API.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:30:05 -08:00
Hans Verkuil e976a725e0 carma-fpga-program.c: fix compile errors
drivers/misc/carma/carma-fpga-program.c: In function 'fpga_program_dma':
drivers/misc/carma/carma-fpga-program.c:529:2: error: expected ';' before 'if'
  if (ret) {
  ^
drivers/misc/carma/carma-fpga-program.c: In function 'fpga_read':
drivers/misc/carma/carma-fpga-program.c:752:45: error: 'ppos' undeclared (first use in this function)
  return simple_read_from_buffer(buf, count, ppos,
                                             ^
drivers/misc/carma/carma-fpga-program.c:752:45: note: each undeclared identifier is reported only once for each function it appears in
drivers/misc/carma/carma-fpga-program.c: In function 'fpga_llseek':
drivers/misc/carma/carma-fpga-program.c:765:27: error: 'file' undeclared (first use in this function)
  return fixed_size_llseek(file, offset, origin, priv->fw_size);
                           ^
drivers/misc/carma/carma-fpga-program.c:759:9: warning: unused variable 'newpos' [-Wunused-variable]
  loff_t newpos;
         ^
drivers/misc/carma/carma-fpga-program.c: In function 'fpga_read':
drivers/misc/carma/carma-fpga-program.c:754:1: warning: control reaches end of non-void function [-Wreturn-type]
 }
 ^
drivers/misc/carma/carma-fpga-program.c: In function 'fpga_llseek':
drivers/misc/carma/carma-fpga-program.c:766:1: warning: control reaches end of non-void function [-Wreturn-type]
 }
 ^
scripts/Makefile.build:263: recipe for target 'drivers/misc/carma/carma-fpga-program.o' failed

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:30:05 -08:00
Michael Neuling ca4f8280ff cxl: Name interrupts in /proc/interrupt
Currently all interrupts generated by cxl are named "cxl".  This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers.  Being able to distinguish them is useful
for setting affinity.

This patch gives each of these names in /proc/interrupts.

A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:

    % grep cxl /proc/interrupts
    444:          0  OPAL ICS 141312 Level     cxl-card1-err
    445:          0  OPAL ICS 141313 Level     cxl-afu1.0-err
    446:          0  OPAL ICS 141314 Level     cxl-afu1.0
    462:          0  OPAL ICS 2052 Level     cxl-afu0.0-pe0-1
    463:      75517  OPAL ICS 2053 Level     cxl-afu0.0-pe0-2
    468:          0  OPAL ICS 2054 Level     cxl-afu0.0-pe0-3
    469:          0  OPAL ICS 2055 Level     cxl-afu0.0-pe0-4
    470:          0  OPAL ICS 2056 Level     cxl-afu0.0-pe1-1
    471:      75506  OPAL ICS 2057 Level     cxl-afu0.0-pe1-2
    472:          0  OPAL ICS 2058 Level     cxl-afu0.0-pe1-3
    473:          0  OPAL ICS 2059 Level     cxl-afu0.0-pe1-4
    502:       1066  OPAL ICS 2050 Level     cxl-afu0.0
    514:          0  OPAL ICS 2048 Level     cxl-card0-err
    515:          0  OPAL ICS 2049 Level     cxl-afu0.0-err

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:29:36 -08:00
Ian Munsie 27bbcef20a CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning
If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:29:36 -08:00
Tomas Winkler 55c4e6405d mei: export fw status registers through sysfs
The interface is for applications that monitor
the fw health.

We use device_create_with_groups interface
to register attribute with the mei class device

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:06:41 -08:00
Alexander Usyskin edca5ea3ff mei: read and print all six FW status registers
ME devices prior to PCH8 (Lynx Point) have two FW status registers,
on PCH8 and newer excluding txe there are six FW status registers.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:06:41 -08:00
Tomas Winkler e88281edd4 mei: txe: add cherrytrail device id
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:06:41 -08:00
Tomas Winkler 18caeb70f3 mei: kill cached host and me csr values
Kill host_hw_status and me_hw_state from me hw structure that used
to cache host and me csr values.
We do not use the cached values across the function calls anymore

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:06:41 -08:00
Thierry Reding c380b862ba misc: Remove unused subdirectory
Commit 783c8f4c84 ("soc/tegra: Add efuse driver for Tegra") added a
fuse directory in drivers/misc along with a Makefile that were never
used. They were leftovers from an earlier version of the patch series.

Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:06:41 -08:00
Ondrej Zary 7ff28aee40 eeprom-93cx6: Add (read-only) support for 8-bit mode
Add read-only support for EEPROMs configured in 8-bit mode (ORG pin connected
to GND).
This will be used by wd719x driver.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-25 15:42:53 +01:00
Al Viro a455589f18 assorted conversions to %p[dD]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-11-19 13:01:20 -05:00
Nicolas Ferre 9373090d9f ARM: at91/Kconfig: remove unused config options
When removing old board !DT support, several Kconfig options were deleted.
Propagate this removal to drivers Kconfig files.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-11-19 11:39:23 +01:00
Michael Neuling 80fa93fce3 cxl: Name interrupts in /proc/interrupt
Currently all interrupts generated by cxl are named "cxl".  This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers.  Being able to distinguish them is useful
for setting affinity.

This patch gives each of these names in /proc/interrupts.

A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:

    % grep cxl /proc/interrupts
    444:          0  OPAL ICS 141312 Level     cxl-card1-err
    445:          0  OPAL ICS 141313 Level     cxl-afu1.0-err
    446:          0  OPAL ICS 141314 Level     cxl-afu1.0
    462:          0  OPAL ICS 2052 Level     cxl-afu0.0-pe0-1
    463:      75517  OPAL ICS 2053 Level     cxl-afu0.0-pe0-2
    468:          0  OPAL ICS 2054 Level     cxl-afu0.0-pe0-3
    469:          0  OPAL ICS 2055 Level     cxl-afu0.0-pe0-4
    470:          0  OPAL ICS 2056 Level     cxl-afu0.0-pe1-1
    471:      75506  OPAL ICS 2057 Level     cxl-afu0.0-pe1-2
    472:          0  OPAL ICS 2058 Level     cxl-afu0.0-pe1-3
    473:          0  OPAL ICS 2059 Level     cxl-afu0.0-pe1-4
    502:       1066  OPAL ICS 2050 Level     cxl-afu0.0
    514:          0  OPAL ICS 2048 Level     cxl-card0-err
    515:          0  OPAL ICS 2049 Level     cxl-afu0.0-err

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-18 13:01:39 +11:00
Ian Munsie bc78b05bb4 cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-11-18 12:58:38 +11:00
Christian Gmeiner a839ce663b eeprom: at24: extend driver to allow writing via i2c_smbus_write_byte_data
I have a at24 EEPROM connected via i2c bus provided by ISCH i2c
bus driver. This bus driver does not support
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK and so I was looking for a way
to be able to write the eeprom. This patch adds support for
I2C_SMBUS_BYTE_DATA writing via i2c_smbus_write_byte_data.
It is quite slow, but it works.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
[wsa: s/use_smbuse_write/use_smbus_write/]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-11-17 19:54:22 +01:00
Markus Stockhausen d2fd76e6f6 enclosure: handle non-unique element descriptors
Some SES devices give non-unique Element Descriptors as part of the
Element Descriptor diag page. Since we use these for creating sysfs
entries, they need to be unique. The specification doesn't require
these to be unique.

Eg:
$ sg_ses -p 7 /dev/sg0
  FTS CORP  TXS6_SAS20BPX12   0500
    enclosure services device
Element descriptor In diagnostic page:
  generation code: 0x0
  element descriptor by type list
    Element type: Array device, subenclosure id: 0
      Overall descriptor: ArrayDevicesInSubEnclsr0
      Element 1 descriptor: ArrayDevice00
      Element 2 descriptor: ArrayDevice01
      Element 3 descriptor: ArrayDevice02
      Element 4 descriptor: ArrayDevice03
      Element 5 descriptor: ArrayDevice03
      Element 6 descriptor: ArrayDevice03
      Element 7 descriptor: ArrayDevice03
      Element 8 descriptor: ArrayDevice03
      Element 9 descriptor: ArrayDevice03
      Element 10 descriptor: ArrayDevice03
      Element 11 descriptor: ArrayDevice03
      Element 12 descriptor: ArrayDevice03

Based on http://thread.gmane.org/gmane.linux.scsi/69289. This
version implements James' ideas about the naming convention

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12 11:15:55 +01:00
Thierry Reding 7750efd59a pch_phub: Build context save/restore only for PM
The pch_phub_save_reg_conf() and pch_phub_restore_reg_conf() functions
are only used for suspend/resume support (i.e. when PM is enabled). If
PM is disabled they don't need to be built.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07 10:28:36 -08:00
Ian Abbott cf35d6e047 misc: genwqe: check for error from get_user_pages_fast()
`genwqe_user_vmap()` calls `get_user_pages_fast()` and if the return
value is less than the number of pages requested, it frees the pages and
returns an error (`-EFAULT`).  However, it fails to consider a negative
error return value from `get_user_pages_fast()`.  In that case, the test
`if (rc < m->nr_pages)` will be false (due to promotion of `rc` to a
large `unsigned int`) and the code will continue on to call
`genwqe_map_pages()` with an invalid list of page pointers.  Fix it by
bailing out if `get_user_pages_fast()` returns a negative error value.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.14.x # 3.15.x # 3.16.x # 3.17.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07 10:26:46 -08:00
Tomas Winkler 5ebdc36458 mei: fix hbm MEI_HBM_STARTED ambiguity
We have MEI_HBM_STARTED in two contexts one
after start message was received and second
after enumeration was completed.
Because after start message reception we move
immediately to the enumeration state, we need
only the later meaning.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07 09:59:08 -08:00
Tomas Winkler a176c24dc9 mei: nfc: clean nfc internal struct on host exit
NFC internal structure cleaning was dropped by commit

commit 487056932d
Author: Tomas Winkler <tomas.winkler@intel.com>
Date:   Mon Feb 17 15:13:19 2014 +0200

    mei: Remove all bus devices from the mei_dev list when stopping the MEI

    When stopping the MEI, we should remove and potentially unregister
    all bus devices queued on the mei_dev linked list.

We allocate nfc_dev and free it across the reset
so we do not keep it in dirty state

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07 09:59:08 -08:00
Bo Shen 49af54ff0f misc: atmel-ssc: prepare clock only when request
Prepare SSC clock only when request SSC channel, the clock will be
enabled when initialize the SSC.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07 09:52:42 -08:00
Mika Westerberg f60e707490 misc: at25: Make use of device property API
Make use of device property API in this driver so that both DT and ACPI
based systems can use this driver.

In addition we hard-code the name of the chip to be "at25" for the
reason that there is no common mechanism to fetch name of the firmware
node. The only existing user (arch/arm/boot/dts/phy3250.dts) uses the
same name so it should continue to work.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04 21:58:21 +01:00
Greg Kroah-Hartman a8a93c6f99 Merge branch 'platform/remove_owner' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into driver-core-next
Remove all .owner fields from platform drivers
2014-11-03 19:53:56 -08:00
Alexander Usyskin d512c2098b mei: hbm: use client specific print functions
We have host client in connect/disconnect response processors,
so use client print functions to simplify and unify code.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03 15:54:45 -08:00
Tomas Winkler 4ade435214 mei: debugfs: display also connectionless clients
<debugfs>meiX/meclients: display also fixed/connectionless clients

Use better name for fixed client field:
fixed_address is boolean and indicates whether a client
is fixed or dynamic.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03 15:54:45 -08:00
Tomas Winkler 3d32cf0224 mei: use local cl variables in wd and amthif
Use local cl variable instead of dev->iamthif_cl and dev->wd_cl
as the first step to use dynamic allocation of these clients
as their are not supported on all platforms

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03 15:52:48 -08:00
Alexander Usyskin 140c755323 mei: drop unneeded client NULL check in cb structure
The pointer to client in the callback structure (cb->cl)
can't be NULL with current locking.
We can drop check and warnings as in some cases this just
uselessly complicates the code flow.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03 15:52:48 -08:00
Ian Munsie eb01d4c238 cxl: Fix PSL error due to duplicate segment table entries
In certain circumstances the PSL (Power Service Layer, which provides
translation services for CXL hardware) can send an interrupt for a
segment miss that the kernel has already handled. This can happen if
multiple translations for the same segment are queued in the PSL before
the kernel has restarted the first translation.

The CXL driver does not expect this situation and does not check if a
segment had already been handled. This could cause a duplicate segment
table entry which in turn caused a PSL error taking down the card.

This patch fixes the issue by checking for existing entries in the
segment table that match the segment we are trying to insert, so as to
avoid inserting duplicate entries.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-28 19:52:52 +11:00
Ian Munsie b03a7f578a cxl: Refactor cxl_load_segment() and find_free_sste()
This moves the segment table hash calculation from cxl_load_segment()
into find_free_sste() since that is the only place it is actually used.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-28 19:52:24 +11:00
Ian Munsie 5100a9d644 cxl: Disable secondary hash in segment table
This patch simplifies the process of finding a free segment table entry
by disabling the secondary hash. This reduces the number of possible
entries in the segment table for a given address from 16 to 8.

Due to the large segment sizes we use it is extremely unlikely that the
secondary hash would ever have been used in practice, so this should not
have any negative impacts and may even improve performance due to the
reduced number of comparisons that software & hardware need to perform.

This patch clears the SC bit in the hardware's state register
(CXL_PSL_SR_An) to disable the secondary hash in the hardware since we
can no longer fill out entries using it.

Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-28 19:52:07 +11:00
Wolfram Sang 17149e4c86 misc: ti-st: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:20:56 +02:00