Commit Graph

33 Commits

Author SHA1 Message Date
Jingoo Han 8a24bb4039 usb: gadget: fusb300_udc: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:28 -05:00
Robert Baldyga e117e742d3 usb: gadget: add "maxpacket_limit" field to struct usb_ep
This patch adds "maxpacket_limit" to struct usb_ep. This field contains
maximum value of maxpacket supported by driver, and is set in driver probe.
This value should be used by autoconfig() function, because value of field
"maxpacket" is set to value from endpoint descriptor when endpoint becomes
enabled. So when autoconfig() function will be called again for this endpoint,
"maxpacket" value will contain wMaxPacketSize from descriptior instead of
maximum packet size for this endpoint.

For this reason this patch adds new field "maxpacket_limit" which contains
value of maximum packet size (which defines maximum endpoint capabilities).
This value is used in ep_matches() function used by autoconfig().

Value of "maxpacket_limit" should be set in UDC driver probe function, using
usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function
set choosen value to both "maxpacket_limit" and "maxpacket" fields.

This patch modifies UDC drivers by adding support for maxpacket_limit.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-17 13:17:41 -06:00
Dave Jones dfe2902032 USB: Faraday fotg210: fix email addresses
Update the MODULE_AUTHOR field of the Faraday OTG drivers to reflect
current maintainers email address.

Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17 09:36:10 -07:00
Jingoo Han 93487aa163 usb: gadget: fusb300_udc: Staticize fusb300_rdcxf()
fusb300_rdcxf() used only in this file.
Fix the following sparse warning:

drivers/usb/gadget/fusb300_udc.c:560:6: warning: symbol 'fusb300_rdcxf' was not declared. Should it be static?

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02 11:19:52 +03:00
Jingoo Han dae8eadf2a usb: gadget: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-28 20:16:56 +03:00
Wei Yongjun c366195103 usb: gadget: fusb300_udc: fix error return code in fusb300_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-05-15 17:25:19 +03:00
Yuan-Hsin Chen 1cb5e9ee03 usb: gadget: fusb300_udc: bug fix of not doing idma reset for each time
Enter IDMA_RESET only when the controller has been reset or
the device has been plugged in to or out from a host. In
IDMA_RESET, we should disable the corresponding PRD interrupt.
Also there is a redundant space eliminated.

fusb300_udc driver is tested on FARADAY platform a369 with
FUSB300 FPGA v1.8

Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-02 16:58:39 +03:00
Yuan-Hsin Chen 9770a16fd9 usb: gadget: fusb300_udc: add FUSB300_EPSET0_STL_CLR for clearing EP0 stall
The final version of fusb300 controller adds EPSET0_STL_CLR
for clearing EP0 stall and also removes EPSET0_EPn_TX0BYTE.

fusb300_udc driver is tested on FARADAY platform a369 with
FUSB300 FPGA v1.8

Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-02 16:57:24 +03:00
Felipe Balbi 509d986a37 usb: gadget: fusb300_udc: don't assign gadget.dev.release directly
udc-core provides a better way to handle release
methods, let's use it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:48 +02:00
Felipe Balbi 6a609129c2 usb: gadget: fusb300_udc: don't touch gadget.dev.driver
udc-core now handles that for us, which means
we can remove it from our driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:35 +02:00
Felipe Balbi 9502d03c42 usb: gadget: fusb300_udc: remove unnecessary initializations
udc-core nos sets dma-related and parent fields
for us, we don't need to do it ourselves.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:20 +02:00
Felipe Balbi 0324f25fc6 usb: gadget: fusb300: switch over to usb_gadget_map/unmap_request()
we have generic implementations for a reason,
let's use them

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:16:58 +02:00
Felipe Balbi 7bce401cc6 usb: gadget: drop now unnecessary flag
We don't need the ->register_my_device flag
anymore because all UDC drivers have been
properly converted.

Let's remove every history of it.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:16:55 +02:00
Felipe Balbi fc84d2fbe7 usb: gadget: fusb300_udc: let udc-core manage gadget->dev
By simply setting a flag, we can drop some
boilerplate code.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:16:45 +02:00
Linus Torvalds 74e1a2a393 USB patches for 3.9-rc1
Here's the big USB merge for 3.9-rc1
 
 Nothing major, lots of gadget fixes, and of course, xhci stuff.
 
 All of this has been in linux-next for a while, with the exception of
 the last 3 patches, which were reverts of patches in the tree that
 caused problems, they went in yesterday.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZ/kACgkQMUfUDdst+ylEhwCgyM0JEOgLuW7M8D+oNcitZn51
 g7oAniD0IkLG8RCB8plLj+82AvthalCo
 =bHSs
 -----END PGP SIGNATURE-----

Merge tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB patches from Greg Kroah-Hartman:
 "Here's the big USB merge for 3.9-rc1

  Nothing major, lots of gadget fixes, and of course, xhci stuff.

  All of this has been in linux-next for a while, with the exception of
  the last 3 patches, which were reverts of patches in the tree that
  caused problems, they went in yesterday."

* tag 'usb-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (190 commits)
  Revert "USB: EHCI: make ehci-vt8500 a separate driver"
  Revert "USB: EHCI: make ehci-orion a separate driver"
  Revert "USB: update host controller Kconfig entries"
  USB: update host controller Kconfig entries
  USB: EHCI: make ehci-orion a separate driver
  USB: EHCI: make ehci-vt8500 a separate driver
  USB: usb-storage: unusual_devs update for Super TOP SATA bridge
  USB: ehci-omap: Fix autoloading of module
  USB: ehci-omap: Don't free gpios that we didn't request
  USB: option: add Huawei "ACM" devices using protocol = vendor
  USB: serial: fix null-pointer dereferences on disconnect
  USB: option: add Yota / Megafon M100-1 4g modem
  drivers/usb: add missing GENERIC_HARDIRQS dependencies
  USB: storage: properly handle the endian issues of idProduct
  testusb: remove all mentions of 'usbfs'
  usb: gadget: imx_udc: make it depend on BROKEN
  usb: omap_control_usb: fix compile warning
  ARM: OMAP: USB: Add phy binding information
  ARM: OMAP2: MUSB: Specify omap4 has mailbox
  ARM: OMAP: devices: create device for usb part of control module
  ...
2013-02-21 12:20:00 -08:00
Felipe Balbi eeef458766 usb: gadget: constify all struct usb_gadget_ops
Add the missing 'const' keyword to all struct
usb_gadget_ops in the gadget framework.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24 21:11:35 +02:00
Felipe Balbi 8de94fffad usb: gadget: fusb300_udc: convert to udc_start/udc_stop
Mechanical change making use of the new (can we
still call it new ?) interface for registering
UDC drivers.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-24 21:11:28 +02:00
Fabio Porcedda 52f7a82b59 usb: converto drivers/usb/* to use module_platform_driver_probe()
This patch converts the drivers in drivers/usb/* to use the
module_platform_driver_probe() macro which makes the code smaller and
a bit simpler.

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 17:39:34 -08:00
Sebastian Andrzej Siewior ffe0b33506 usb: gadget: remove global variable composite in composite.c
This patch removes the global variable composite in composite.c.
The private data which was saved there is now passed via an additional
argument to the bind() function in struct usb_gadget_driver.

Only the "old-style" UDC drivers have to be touched here, new style are
doing it right because this change is made in udc-core.

Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 15:35:41 +03:00
Ido Shayevitz fab1137f63 usb: gadget: Update fusb300_udc to use usb_endpoint_descriptor inside the struct usb_ep
Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04 15:52:55 +03:00
Michal Nazarewicz 7177aed44f usb: gadget: rename usb_gadget_driver::speed to max_speed
This commit renames the “speed” field of the usb_gadget_driver
structure to “max_speed”.  This is so that to make it more
apparent that the field represents the maximum speed gadget
driver can support.

This also make the field look more like fields with the same
name in usb_gadget and usb_composite_driver structures.  All
of those represent the *maximal* speed given entity supports.

After this commit, there are the following fields in various
structures:
* usb_gadget::speed - the current connection speed,
* usb_gadget::max_speed - maximal speed UDC supports,
* usb_gadget_driver::max_speed - maximal speed gadget driver
  supports, and
* usb_composite_driver::max_speed - maximal speed composite
  gadget supports.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:12 +02:00
Michal Nazarewicz d327ab5b6d usb: gadget: replace usb_gadget::is_dualspeed with max_speed
This commit replaces usb_gadget's is_dualspeed field with
a max_speed field.

[ balbi@ti.com : Fixed DWC3 driver ]

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:45:11 +02:00
Paul Gortmaker 6eb0de8270 usb: Add module.h to drivers/usb consumers who really use it.
The situation up to this point meant that module.h was pretty
much everywhere, regardless of whether you asked for it or not.
We are fixing that, so give the USB folks who want it an actual
include of it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:25 -04:00
Yong Zhang b5dd18d874 USB: irq: Remove IRQF_DISABLED
This flag is a NOOP and can be removed now.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-18 01:39:36 -07:00
Klaus Schwarzkopf 28c9fc68eb usb gadget: clean up FSF boilerplate text
remove the following two paragraphs as they are not needed:

This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
License for more details.

You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,59
Temple Place - Suite 330, Boston, MA  02111-1307, USA.

Signed-off-by: Klaus Schwarzkopf <schwarzkopf@sensortherm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-09 16:00:09 -07:00
Kuninori Morimoto 29cc88979a USB: use usb_endpoint_maxp() instead of le16_to_cpu()
Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size
instead of le16_to_cpu(desc->wMaxPacketSize).
This patch fix it up

Cc: Armin Fuerst <fuerst@in.tum.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Erdfelt <johannes@erdfelt.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: David Kubicek <dave@awk.cz>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Brad Hards <bhards@bigpond.net.au>
Acked-by: Felipe Balbi <balbi@ti.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Lopo <dlopo@chipidea.mips.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Xie Xiaobo <X.Xie@freescale.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Jiang Bo <tanya.jiang@freescale.com>
Cc: Yuan-hsin Chen <yhchen@faraday-tech.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Herbert Pötzl <herbert@13thfloor.at>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Roman Weissgaerber <weissg@vienna.at>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: Florian Floe Echtler <echtler@fs.tum.de>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Juergen Stuber <starblue@sourceforge.net>
Cc: Georges Toth <g.toth@e-biz.lu>
Cc: Bill Ryder <bryder@sgi.com>
Cc: Kuba Ober <kuba@mareimbrium.org>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 09:47:40 -07:00
Sebastian Andrzej Siewior 9c5ea0ea27 usb: gadget: fusb300: remove #if 0 block
The code in this block is unused and the Author is fine with removing:

| These functions were used to debug unstable hw fifo while developing
| fusb300.  It's much more stable now.
| So these functions can be removed.

Cc: "Wendy Yuan-Hsin Chen" <yhchen@faraday-tech.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-08-01 22:06:33 +03:00
Sebastian Andrzej Siewior 1425b80e0d usb: gadget: fusb300_udc: fix compile warnings
- remove pointer u32 abuse in fusb300_fill_idma_prdtbl().
  It is assigned the dma_addr to a pointer and then back.
  Poor families may have to recycle variables but we don't

- don't free req.buf in error case. We don't do it in the
  ok case so it is probably wrong to do it in error case.

- return in error case. There is no reason to continue
  without data and performing ops on an invalid pointer.

- The if (d) statement is bogus since an invalid DMA pointer
  is ~0 on some architecutres. And since we return for the
  invalid case we don't need it.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-05 16:41:15 +03:00
Felipe Balbi 4dbafd3dce usb: gadget: fusb300_udc: drop dead code
that code has been dead forever. Since the
first commit (0fe6f1d1) the use of that code
has been commented out. Let's drop the dead
code already and fix the following compile
warning:

| drivers/usb/gadget/fusb300_udc.c: At top level:
| drivers/usb/gadget/fusb300_udc.c:771:13: warning: ‘fusb300_wrfifo’ defined but not used [-Wunused-function]
| drivers/usb/gadget/fusb300_udc.c:1027:13: warning: ‘fusb300_set_ep_bycnt’ defined but not used [-Wunused-function]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-05 16:41:12 +03:00
Sebastian Andrzej Siewior 0f91349b89 usb: gadget: convert all users to the new udc infrastructure
peripheral drivers are using usb_add_gadget()/usb_del_gadget() to
register/unregister to the udc-core.

The udc-core will take the first available gadget driver and attach
function driver which is calling usb_gadget_register_driver(). This is
the same behaviour we have right now.

Only dummy_hcd was tested, the others were compiled tested.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Roy Huang <roy.huang@analog.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: cxie4 <cxie4@marvell.com>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-28 11:13:35 -07:00
Guenter Roeck 680681747f usb/gadget: (fusb300_udc) Remove unused function fusb300_ep0_complete
fusb300_ep0_complete() is an empty function, not called from anywhere,
and causes the following build warning.

fusb300_udc.c:983: warning: fusb300_ep0_complete defined but not used

Remove it.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-06 16:32:36 -07:00
Dan Carpenter 6b2e30c07f usb: fusb300_udc: add more "ep%d" names
We need FUSB300_MAX_NUM_EP (16) names otherwise the last 8 names get
initialized to garbage values in fusb300_probe().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 10:47:55 -08:00
Yuan-Hsin Chen 0fe6f1d1f6 usb: udc: add Faraday fusb300 driver
USB2.0 device controller driver for Faraday fubs300

Signed-off-by: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-22 19:45:36 -08:00