BCM7211 supports wake-up interrupts in the form of optional interrupt
lines, one per bank, plus the "all banks" interrupt line.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200531001101.24945-3-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Driver use interrupt-parent field so update the bindings to allow it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200513145935.22493-15-benjamin.gaignard@st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update.
-----BEGIN PGP SIGNATURE-----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=1bkc
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Enable erase/discard/trim support for all (e)MMC/SD hosts
- Export information through sysfs about enhanced RPMB support (eMMC v5.1+)
- Align the initialization commands for SDIO cards
- Fix SDIO initialization to prevent memory leaks and NULL pointer errors
- Do not export undefined MMC_NAME/MODALIAS for SDIO cards
- Export device/vendor field from common CIS for SDIO cards
- Move SDIO IDs from functional drivers to the common SDIO header
- Introduce the ->request_atomic() host ops
MMC host:
- Improve support for HW busy signaling for several hosts
- Converting some DT bindings to the json-schema
- meson-mx-sdhc: Add driver and DT doc for the Amlogic Meson SDHC controller
- meson-mx-sdio: Run a soft reset to recover from timeout/CRC error
- mmci: Convert to use mmc_regulator_set_vqmmc()
- mmci_stm32_sdmmc: Fix a couple of DMA bugs
- mmci_stm32_sdmmc: Fix power on issue
- renesas,mmcif,sdhci: Document r8a7742 DT bindings
- renesas_sdhi: Add support for M3-W ES1.2 and 1.3 revisions
- renesas_sdhi: Improvements to the TAP selection
- renesas_sdhi/tmio: Further fixup runtime PM management at ->remove()
- sdhci: Introduce ops to dump vendor specific registers
- sdhci-cadence: Fix PHY write sequence
- sdhci-esdhc-imx: Improve tunings
- sdhci-esdhc-imx: Enable GPIO card detect as system wakeup
- sdhci-esdhc-imx: Add HS400 support for i.MX6SLL
- sdhci-esdhc-mcf: Add driver for the Coldfire/M5441X esdhc controller
- m68k: mcf5441x: Add platform data to enable esdhc mmc controller
- sdhci-msm: Improve HS400 tuning
- sdhci-msm: Dump vendor specific registers at error
- sdhci-msm: Add support for DLL/DDR properties provided from DT
- sdhci-msm: Add support for the sm8250 variant
- sdhci-msm: Add support for DVFS by converting to dev_pm_opp_set_rate()
- sdhci-of-arasan: Add support for Intel Keem Bay variant
- sdhci-of-arasan: Add support for Xilinx Versal SD variant
- sdhci-of-dwcmshc: Add support for system suspend/resume
- sdhci-of-dwcmshc: Fix UHS signaling support
- sdhci-of-esdhc: Fix tuning for eMMC HS400 mode
- sdhci-pci-gli: Add Genesys Logic GL9763E support
- sdhci-sprd: Add support for the ->request_atomic() ops
- sdhci-tegra: Avoid reading autocal timeout values when not applicable
MEMSTICK:
- Minor trivial update"
* tag 'mmc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (127 commits)
dt-bindings: mmc: Convert sdhci-pxa to json-schema
mmc: sdhci-msm: Clear tuning done flag while hs400 tuning
mmc: core: Export device/vendor ids from Common CIS for SDIO cards
mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cards
mmc: sdhci-of-at91: fix CALCR register being rewritten
mmc: sdhci-esdhc-imx: disable the CMD CRC check for standard tuning
mmc: sdhci-esdhc-imx: fix the mask for tuning start point
mmc: host: sdhci-esdhc-imx: add wakeup feature for GPIO CD pin
mmc: mmci_sdmmc: fix DMA API warning max segment size
mmc: mmci_sdmmc: fix DMA API warning overlapping mappings
mmc: sdhci-of-arasan: Add support for Intel Keem Bay
dt-bindings: mmc: arasan: Add compatible strings for Intel Keem Bay
mmc: sdhci-cadence: fix PHY write
mmc: sdio: Sort all SDIO IDs in common include file
mmc: sdio: Fix Cypress SDIO IDs macros in common include file
mmc: sdio: Move SDIO IDs from b43-sdio driver to common include file
mmc: sdio: Move SDIO IDs from ath10k driver to common include file
mmc: sdio: Move SDIO IDs from ath6kl driver to common include file
mmc: sdio: Move SDIO IDs from smssdio driver to common include file
mmc: sdio: Move SDIO IDs from btmtksdio driver to common include file
...
Convert the i.MX MU binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX GPCv2 binding to DT schema format using json-schema
Example is updated based on latest DT file and consumer's example is
removed since it is NOT that useful.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX GPC binding to DT schema format using json-schema
>From latest reference manual, there is actually ONLY 1 interrupt for
GPC, so the additional GPC interrupt is removed.
Consumer's example is also removed since it is NOT that useful.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
- Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
- Add support for X1830 and X1000 Ingenic SoC clk controllers
- Add support for Qualcomm's MSM8939 Generic Clock Controller
- Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
- Enable supply regulators for GPU gdscs on Qualcomm SoCs
- Add support for Si5342, Si5344 and Si5345 chips
* clk-mmp:
clk: mmp2: Add audio clock controller driver
dt-bindings: clock: Add Marvell MMP Audio Clock Controller binding
clk: mmp2: Add support for power islands
dt-bindings: marvell,mmp2: Add ids for the power domains
dt-bindings: clock: Make marvell,mmp2-clock a power controller
clk: mmp2: Add the audio clock
clk: mmp2: Add the I2S clocks
clk: mmp2: Rename mmp2_pll_init() to mmp2_main_clk_init()
clk: mmp2: Move thermal register defines up a bit
dt-bindings: marvell,mmp2: Add clock id for the Audio clock
dt-bindings: marvell,mmp2: Add clock id for the I2S clocks
clk: mmp: frac: Allow setting bits other than the numerator/denominator
clk: mmp: frac: Do not lose last 4 digits of precision
* clk-intel:
clk: intel: remove redundant initialization of variable rate64
clk: intel: Add CGU clock driver for a new SoC
dt-bindings: clk: intel: Add bindings document & header file for CGU
* clk-ingenic:
clk: ingenic: Mark ingenic_tcu_of_match as __maybe_unused
clk: X1000: Add FIXDIV for SSI clock of X1000.
dt-bindings: clock: Add and reorder ABI for X1000.
clk: Ingenic: Add CGU driver for X1830.
dt-bindings: clock: Add X1830 clock bindings.
clk: Ingenic: Adjust cgu code to make it compatible with X1830.
clk: Ingenic: Remove unnecessary spinlock when reading registers.
* clk-qcom:
clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src
dt-bindings: clock: Add YAML schemas for QCOM A53 PLL
clk: qcom: gcc-msm8939: Add MSM8939 Generic Clock Controller
clk: qcom: gcc: Add support for Secure control source clock
dt-bindings: clock: Add gcc_sec_ctrl_clk_src clock ID
clk: qcom: gcc: Add support for a new frequency for SC7180
clk: qcom: Add DT bindings for MSM8939 GCC
clk: qcom: gcc: Add missing UFS clocks for SM8150
clk: qcom: gcc: Add GPU and NPU clocks for SM8150
clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc
clk: qcom: gdsc: Handle GDSC regulator supplies
clk: qcom: msm8916: Fix the address location of pll->config_reg
* clk-silabs:
clk: clk-si5341: Add support for the Si5345 series
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage (WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)
-----BEGIN PGP SIGNATURE-----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=7s1u
-----END PGP SIGNATURE-----
Merge tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
"Fixes and new features for pstore.
This is a pretty big set of changes (relative to past pstore pulls),
but it has been in -next for a while. The biggest change here is the
ability to support a block device as a pstore backend, which has been
desired for a while. A lot of additional fixes and refactorings are
also included, mostly in support of the new features.
- refactor pstore locking for safer module unloading (Kees Cook)
- remove orphaned records from pstorefs when backend unloaded (Kees
Cook)
- refactor dump_oops parameter into max_reason (Pavel Tatashin)
- introduce pstore/zone for common code for contiguous storage
(WeiXiong Liao)
- introduce pstore/blk for block device backend (WeiXiong Liao)
- introduce mtd backend (WeiXiong Liao)"
* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
mtd: Support kmsg dumper based on pstore/blk
pstore/blk: Introduce "best_effort" mode
pstore/blk: Support non-block storage devices
pstore/blk: Provide way to query pstore configuration
pstore/zone: Provide way to skip "broken" zone for MTD devices
Documentation: Add details for pstore/blk
pstore/zone,blk: Add ftrace frontend support
pstore/zone,blk: Add console frontend support
pstore/zone,blk: Add support for pmsg frontend
pstore/blk: Introduce backend for block devices
pstore/zone: Introduce common layer to manage storage zones
ramoops: Add "max-reason" optional field to ramoops DT node
pstore/ram: Introduce max_reason and convert dump_oops
pstore/platform: Pass max_reason to kmesg dump
printk: Introduce kmsg_dump_reason_str()
printk: honor the max_reason field in kmsg_dumper
printk: Collapse shutdown types into a single dump reason
pstore/ftrace: Provide ftrace log merging routine
pstore/ram: Refactor ftrace buffer merging
pstore/ram: Refactor DT size parsing
...
Pull crypto updates from Herbert Xu:
"API:
- Introduce crypto_shash_tfm_digest() and use it wherever possible.
- Fix use-after-free and race in crypto_spawn_alg.
- Add support for parallel and batch requests to crypto_engine.
Algorithms:
- Update jitter RNG for SP800-90B compliance.
- Always use jitter RNG as seed in drbg.
Drivers:
- Add Arm CryptoCell driver cctrng.
- Add support for SEV-ES to the PSP driver in ccp"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
crypto: hisilicon - fix driver compatibility issue with different versions of devices
crypto: engine - do not requeue in case of fatal error
crypto: cavium/nitrox - Fix a typo in a comment
crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
crypto: hisilicon/qm - add debugfs to the QM state machine
crypto: hisilicon/qm - add debugfs for QM
crypto: stm32/crc32 - protect from concurrent accesses
crypto: stm32/crc32 - don't sleep in runtime pm
crypto: stm32/crc32 - fix multi-instance
crypto: stm32/crc32 - fix run-time self test issue.
crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
crypto: hisilicon/zip - Use temporary sqe when doing work
crypto: hisilicon - add device error report through abnormal irq
crypto: hisilicon - remove codes of directly report device errors through MSI
crypto: hisilicon - QM memory management optimization
crypto: hisilicon - unify initial value assignment into QM
...
The big change in this release is that Matti Vaittinen has factored out
the linear ranges support into a separate library in lib/ since it is
also useful for at least the power subsystem (and most likely others
too), it helps subsystems which need to map register values into more
useful real world values do so with minimal per-driver code.
- Factoring out of the linear ranges support into a library in lib/
from Matti Vaittinen.
- Trace points for bypass mode.
- Use the consumer name in debugfs to make it easier to understand.
- New drivers for Maxim MAX77826 and MAX8998.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U8oETHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Fi+B/47cqB4/3uchKAXCHn4WE0hDANfeK4k
SkyBl9OH/UC0I/+V/nFrl1CfZgPMm18MuXG+D6fO+qqd1Df7EIgtehxh3MOjD15m
ZFFGybKBG2xg5G/dULE58/N5ZNTd03x8kgYePFmJEFe+m4qUvuICDEoOTHq+tvOO
sgeZPKYuipmGNrUAV4l49SSPuTFBhvAIg5VoR+K9TxxWAacMu7JM7GuGUMij8XwR
i1AryKGvDuCa7hfdWGVwbE+W/XmXiAWsmyz04YDXsYLTk9TjqviCJgf1Bst5EphP
ACr+KMDUIl+Y06wd7DE1UYnXtIxQg/MQ6wlJxG+wtIiZUt2vZcP2pbT6
=w291
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is that Matti Vaittinen has factored
out the linear ranges support into a separate library in lib/ since it
is also useful for at least the power subsystem (and most likely
others too), it helps subsystems which need to map register values
into more useful real world values do so with minimal per-driver code.
- Factoring out of the linear ranges support into a library in lib/
from Matti Vaittinen.
- Trace points for bypass mode.
- Use the consumer name in debugfs to make it easier to understand.
- New drivers for Maxim MAX77826 and MAX8998"
* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: max8998: max8998_set_current_limit() can be static
dt-bindings: regulator: Convert anatop regulator to json-schema
regulator: core: Add regulator bypass trace points
regulator: extract voltage balancing code to the separate function
regulator/mfd: max8998: Document charger regulator
regulator: max8998: Add charger regulator
MAINTAINERS: Add maintainer entry for linear ranges helper
regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
lib: linear_ranges: Add missing MODULE_LICENSE()
regulator: use linear_ranges helper
power: supply: bd70528: rename linear_range to avoid collision
lib/test_linear_ranges: add a test for the 'linear_ranges'
lib: add linear ranges helpers
regulator: db8500-prcmu: Use true,false for bool variable
regulator: bd718x7: remove voltage change restriction from BD71847
regulator: max77826: Remove erroneous additionalProperties
regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
regulator: Document bindings for max77826
regulator: max77826: Add max77826 regulator driver
regulator: tps80031: remove redundant assignment to variables ret and val
...
This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with some
of that work still not landed. Otherwise it's been fairly quiet for the
subsystem. Highlights include:
- Lots of performance improvements and fixes for the DesignWare driver
from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement Leger,
Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4,
and Intel Elkhart Lake.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl7U6r0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LasB/9npXOMe6tOT03YqtIhN4pxrdUo+LsN
A5Rc8prfQo7srnIZMndt5/wcTftomVdvjSNrtyXMXtzj+Logx01Pndrr6UVUP6Qq
Sy0R+4QXBSlj5QtUOBvGFTlzKw2BEaOBYftxVKQM6s4eoefvl0BFALHpEeaHvsDO
YXfwU8EK6sZylDzvsuVy2uoJlTcY4+wKop7JWY5Ze+LTUjsuJQVEG9zbxpZNEpOn
ZHO3FVS2MlIAuhcVmy0TfvYxTldTrT89zv8x4sKaPaXwDJFzYjJBwz77vYAjD8u5
i52JhrAMkZyU4SZdnciJLJx9oTdT8+Rj32oQBU6uK8nRN7U3zflNHHQw
=qm1J
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been a very active release for the DesignWare driver in
particular - after a long period of inactivity we have had a lot of
people actively working on it for unrelated reasons this cycle with
some of that work still not landed.
Otherwise it's been fairly quiet for the subsystem.
Highlights include:
- Lots of performance improvements and fixes for the DesignWare
driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
Leger, Dinh Nguyen and Jarkko Nikula.
- Support for octal mode transfers in spidev.
- Slave mode support for the Rockchip drivers.
- Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
Intel Elkhart Lake"
* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
spi: spi-fsl-dspi: fix native data copy
spi: Convert DW SPI binding to DT schema
spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
spi: dw: Make DMA request line assignments explicit for Intel Medfield
spi: bcm2835: Remove shared interrupt support
dt-bindings: snps,dw-apb-ssi: add optional reset property
spi: dw: add reset control
spi: bcm2835: Enable shared interrupt support
spi: bcm2835: Implement shutdown callback
spi: dw: Use regset32 DebugFS method to create regdump file
spi: dw: Add DMA support to the DW SPI MMIO driver
spi: dw: Cleanup generic DW DMA code namings
spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
spi: dw: Add core suffix to the DW APB SSI core source file
spi: dw: Fix Rx-only DMA transfers
spi: dw: Use DMA max burst to set the request thresholds
spi: dw: Parameterize the DMA Rx/Tx burst length
spi: dw: Add SPI Rx-done wait method to DMA-based transfer
...
Infrastructure
- Add notification support
New drivers
- Baikal-T1 PVT sensor driver
- amd_energy driver to report energy counters
- Driver for Maxim MAX16601
- Gateworks System Controller
Various
- applesmc: avoid overlong udelay()
- dell-smm: Use one DMI match for all XPS models
- ina2xx: Implement alert functions
- lm70: Add support for ACPI
- lm75: Fix coding-style warnings
- lm90: Add max6654 support to lm90 driver
- nct7802: Replace container_of() API
- nct7904: Set default timeout
- nct7904: Add watchdog function
- pmbus: Improve initialization of 'currpage' and 'currphase'
-----BEGIN PGP SIGNATURE-----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=QZKO
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Infrastructure:
- Add notification support
New drivers:
- Baikal-T1 PVT sensor driver
- amd_energy driver to report energy counters
- Driver for Maxim MAX16601
- Gateworks System Controller
Various:
- applesmc: avoid overlong udelay()
- dell-smm: Use one DMI match for all XPS models
- ina2xx: Implement alert functions
- lm70: Add support for ACPI
- lm75: Fix coding-style warnings
- lm90: Add max6654 support to lm90 driver
- nct7802: Replace container_of() API
- nct7904: Set default timeout
- nct7904: Add watchdog function
- pmbus: Improve initialization of 'currpage' and 'currphase'"
* tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits)
hwmon: Add Baikal-T1 PVT sensor driver
hwmon: Add notification support
dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
hwmon: (applesmc) avoid overlong udelay()
hwmon: (nct7904) Set default timeout
hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init()
MAINTAINERS: add entry for AMD energy driver
hwmon: (amd_energy) Add documentation
hwmon: Add amd_energy driver to report energy counters
hwmon: (nct7802) Replace container_of() API
hwmon: (lm90) Add max6654 support to lm90 driver
hwmon : (nct6775) Use kobj_to_dev() API
hwmon: (pmbus) Driver for Maxim MAX16601
hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'
hwmon: (adt7411) update contact email
hwmon: (lm75) Fix all coding-style warnings on lm75 driver
hwmon: Reduce indentation level in __hwmon_device_register()
hwmon: (ina2xx) Implement alert functions
hwmon: (lm70) Add support for ACPI
hwmon: (dell-smm) Use one DMI match for all XPS models
...
* Stop using nand_release(), patched all drivers.
* Give more information about the ECC weakness when not matching the
chip's requirement.
* MAINTAINERS updates.
* Support emulated SLC mode on MLC NANDs.
* Support "constrained" controllers, adapt the core and ONFI/JEDEC
table parsing and Micron's code.
* Take check_only into account.
* Add an invalid ECC mode to discriminate with valid ones.
* Return an enum from of_get_nand_ecc_algo().
* Drop OOB_FIRST placement scheme.
* Introduce nand_extract_bits().
* Ensure a consistent bitflips numbering.
* BCH lib:
- Allow easy bit swapping.
- Rework a little bit the exported function names.
* Fix nand_gpio_waitrdy().
* Propage CS selection to sub operations.
* Add a NAND_NO_BBM_QUIRK flag.
* Give the possibility to verify a read operation is supported.
* Add a helper to check supported operations.
* Avoid indirect access to ->data_buf().
* Rename the use_bufpoi variables.
* Fix comments about the use of bufpoi.
* Rename a NAND chip option.
* Reorder the nand_chip->options flags.
* Translate obscure bitfields into readable macros.
* Timings:
- Fix default values.
- Add mode information to the timings structure.
Raw NAND controller driver changes:
* Fixed many error paths.
* Arasan
- New driver
* Au1550nd:
- Various cleanups
- Migration to ->exec_op()
* brcmnand:
- Misc cleanup.
- Support v2.1-v2.2 controllers.
- Remove unused including <linux/version.h>.
- Correctly verify erased pages.
- Fix Hamming OOB layout.
* Cadence
- Make cadence_nand_attach_chip static.
* Cafe:
- Set the NAND_NO_BBM_QUIRK flag
* cmx270:
- Remove this controller driver.
* cs553x:
- Misc cleanup
- Migration to ->exec_op()
* Davinci:
- Misc cleanup.
- Migration to ->exec_op()
* Denali:
- Add more delays before latching incoming data
* Diskonchip:
- Misc cleanup
- Migration to ->exec_op()
* Fsmc:
- Change to non-atomic bit operations.
* GPMI:
- Use nand_extract_bits()
- Fix runtime PM imbalance.
* Ingenic:
- Migration to exec_op()
- Fix the RB gpio active-high property on qi, lb60
- Make qi_lb60_ooblayout_ops static.
* Marvell:
- Misc cleanup and small fixes
* Nandsim:
- Fix the error paths, driver wide.
* Omap_elm:
- Fix runtime PM imbalance.
* STM32_FMC2:
- Misc cleanups (error cases, comments, timeout valus, cosmetic
changes).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl7TdZMACgkQJWrqGEe9
VoRthQgAttWsImXpEUa8C8CXvPhjpb6uZ7QYM4PSE0bheuVi7ivoDPyYWopno30h
R6UntGbsBqPyvDFDUxUEvyvn5F0JQK1dLif+7X0Ki5on6LkYdEuanHaSMZmSIXD8
atNhLVO1FeD3EulN8Dw9hGy6OrNT8O2bESbiJrCpOk9s6yAPINhKqZVJsyShcTs5
tc94/J0DIF7og8cdH4wYoz+AWw0WaHvPsn5VWnTy08gk7dB7hsq/DeftZmrJLL0g
B7Et1pvcLBSNBGBpzS6rEjXb/e3+wdKnNy0AQvrMdEZUzN3h9aY5sCLSFOsFfKQ+
xjxJgmyoKk0C9uCeNaPt8c7gTgAZAA==
=Gz6y
-----END PGP SIGNATURE-----
Merge tag 'nand/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next
Raw NAND core changes:
* Stop using nand_release(), patched all drivers.
* Give more information about the ECC weakness when not matching the
chip's requirement.
* MAINTAINERS updates.
* Support emulated SLC mode on MLC NANDs.
* Support "constrained" controllers, adapt the core and ONFI/JEDEC
table parsing and Micron's code.
* Take check_only into account.
* Add an invalid ECC mode to discriminate with valid ones.
* Return an enum from of_get_nand_ecc_algo().
* Drop OOB_FIRST placement scheme.
* Introduce nand_extract_bits().
* Ensure a consistent bitflips numbering.
* BCH lib:
- Allow easy bit swapping.
- Rework a little bit the exported function names.
* Fix nand_gpio_waitrdy().
* Propage CS selection to sub operations.
* Add a NAND_NO_BBM_QUIRK flag.
* Give the possibility to verify a read operation is supported.
* Add a helper to check supported operations.
* Avoid indirect access to ->data_buf().
* Rename the use_bufpoi variables.
* Fix comments about the use of bufpoi.
* Rename a NAND chip option.
* Reorder the nand_chip->options flags.
* Translate obscure bitfields into readable macros.
* Timings:
- Fix default values.
- Add mode information to the timings structure.
Raw NAND controller driver changes:
* Fixed many error paths.
* Arasan
- New driver
* Au1550nd:
- Various cleanups
- Migration to ->exec_op()
* brcmnand:
- Misc cleanup.
- Support v2.1-v2.2 controllers.
- Remove unused including <linux/version.h>.
- Correctly verify erased pages.
- Fix Hamming OOB layout.
* Cadence
- Make cadence_nand_attach_chip static.
* Cafe:
- Set the NAND_NO_BBM_QUIRK flag
* cmx270:
- Remove this controller driver.
* cs553x:
- Misc cleanup
- Migration to ->exec_op()
* Davinci:
- Misc cleanup.
- Migration to ->exec_op()
* Denali:
- Add more delays before latching incoming data
* Diskonchip:
- Misc cleanup
- Migration to ->exec_op()
* Fsmc:
- Change to non-atomic bit operations.
* GPMI:
- Use nand_extract_bits()
- Fix runtime PM imbalance.
* Ingenic:
- Migration to exec_op()
- Fix the RB gpio active-high property on qi, lb60
- Make qi_lb60_ooblayout_ops static.
* Marvell:
- Misc cleanup and small fixes
* Nandsim:
- Fix the error paths, driver wide.
* Omap_elm:
- Fix runtime PM imbalance.
* STM32_FMC2:
- Misc cleanups (error cases, comments, timeout valus, cosmetic
changes).
Pull operating performance points (OPP) framework changes for v5.8
from Viresh Kumar:
"This contains:
- support for interconnect bandwidth in the OPP core (Georgi Djakov,
Saravana Kannan, Sibi Sankar, Viresh Kumar).
- support for regulator enable/disable (Kamil Konieczny).
This is based on three patches from the interconnect tree which
shall get merged via Greg's tree."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
Convert the sdhci-pxa binding to DT schema format using json-schema.
At the same time, fix a couple of issues with the examples discovered by
the validation tool -- a semicolon instead of a comma and wrong node names.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200521091356.2211020-2-lkundrak@v3.sk
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add brcm,brcmnand-v2.1 and brcm,brcmnand-v2.2 as possible compatible
strings to support brcmnand controllers v2.1 and v2.2.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-5-noltari@gmail.com
It is useful to know if we are the only master on a given bus. Because
this is a HW description of the bus, add it to the generic bindings.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
IDT VersaClock 5 5P49V6965 has 5 clock outputs, 4 fractional dividers.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lkml.kernel.org/r/20200404161537.2312297-2-aford173@gmail.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After being gained by the CCU PLLs the signals must be transformed to
be suitable for the clock-consumers. This is done by a set of dividers
embedded into the CCU. A first block of dividers is used to create
reference clocks for AXI-bus of high-speed peripheral IP-cores of the
chip. The second block dividers alter the PLLs output signals to be then
consumed by SoC peripheral devices. Both block DT nodes are ordinary
clock-providers with standard set of properties supported. But in addition
to that each clock provider can be used to reset the corresponding clock
domain. This makes the AXI-bus and System Devices CCU DT nodes to be also
reset-providers.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-3-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Baikal-T1 Clocks Control Unit is responsible for transformation of a
signal coming from an external oscillator into clocks of various
frequencies to propagate them then to the corresponding clocks
consumers (either individual IP-blocks or clock domains). In order
to create a set of high-frequency clocks the external signal is
firstly handled by the embedded into CCU PLLs. So the corresponding
dts-node is just a normal clock-provider node with standard set of
properties. Note as being part of the Baikal-T1 System Controller its
DT node is supposed to be a child the system controller node.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200526222056.18072-2-Sergey.Semin@baikalelectronics.ru
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently, it is only possible to get kmsg dumps for panic and oops,
or just panic, via "no-dump-oops". With "max-reason" it is possible to
dump messages for other kmsg_dump events, for example emerg and shutdown.
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/lkml/20200515184434.8470-7-keescook@chromium.org/
Signed-off-by: Kees Cook <keescook@chromium.org>
Add the "baikal,bt1-sys-i2c" compatible string to the DW I2C binding. Even
though the corresponding node is supposed to be a child of the Baikal-T1
System Controller, its reg property is left required for compatibility.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
dtc currently doesn't support I2C_OWN_SLAVE_ADDRESS flag set in the
i2c "reg" property. If dtc finds an i2c-slave sub-node having an address
higher than ten-bits wide it'll print an ugly warning:
Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64: I2C bus unit address format error, expected "40000064"
Warning (i2c_bus_reg): /example-2/i2c@1120000/eeprom@64:reg: I2C address must be less than 10-bits, got "0x40000064"
In order to silence dtc up let's replace the corresponding DT binding
example with a normal DW I2C master mode-based one. It's done by clearing
the I2C_OWN_SLAVE_ADDRESS bit in the reg property and converting the
sub-node to be compatible with normal EEPROM like "atmel,24c02".
Just revert this commit when dtc is fixed.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces Synopsys DW I2C
legacy bare text bindings with YAML file. As before the bindings file
states that the corresponding dts node is supposed to be compatible
either with generic DW I2C controller or with Microsemi Ocelot SoC I2C
one, to have registers, interrupts and clocks properties. In addition
the node may have clock-frequency, i2c-sda-hold-time-ns,
i2c-scl-falling-time-ns and i2c-sda-falling-time-ns optional properties.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI)
- A cleanup of the __irq_domain_add() API
- A cleanup of the IRQ simulator to actually use some of
the irq infrastructure
- Some fixes for the Sifive PLIC when used in a multi-controller
context
- Fixes for the GICv3 ITS to spread interrupts according to the
load of each CPU, and to honor managed interrupts
- Numerous cleanups and documentation fixes
-----BEGIN PGP SIGNATURE-----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=RX31
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- A few new drivers for the Loongson MIPS platform (HTVEC, PIC, MSI)
- A cleanup of the __irq_domain_add() API
- A cleanup of the IRQ simulator to actually use some of
the irq infrastructure
- Some fixes for the Sifive PLIC when used in a multi-controller
context
- Fixes for the GICv3 ITS to spread interrupts according to the
load of each CPU, and to honor managed interrupts
- Numerous cleanups and documentation fixes
The driver itself was renamed before getting merged into mainline, but
the binding document kept the old name. This makes both names consistent.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add description for NXP imx8 families like imx8mp/imx8dxl
that integrate the Synopsys gmac IP version 5.10a.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The binding for usb-connector is a superset of gpio-usb-b-connector. One
major difference is that gpio-usb-b-connector requires at least one of
the vbus-gpios and id-gpios properties to be specified. Merge the two
bindings by adding the compatible string combination for the GPIO USB-B
variant and an extra conditional for the required properties list to the
usb-connector.yaml file.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas Compare Match Timer (CMT) Device Tree binding
documentation to json-schema.
Document missing properties.
Update the example to match reality.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX8QXP LPCG binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[robh: add additionalProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX GPT binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add thermal sensor support for r8a7742 SoC. The Renesas RZ/G1H
(r8a7742) thermal sensor module is identical to the R-Car Gen2 family.
No driver change is needed due to the fallback compatible value
"renesas,rcar-gen2-thermal".
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add documentation for the interconnect and interconnect-names properties
for the GENI QUP.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert QUP geni-se bindings to DT schema format using json-schema.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[robh: Fix up example warnings]
Signed-off-by: Rob Herring <robh@kernel.org>
Modern device tree bindings are supposed to be created as YAML-files
in accordance with dt-schema. This commit replaces two DW SPI legacy
bare text bindings with YAML file. As before the bindings file states
that the corresponding dts node is supposed to be compatible either
with generic DW APB SSI controller or with Microsemi/Amazon/Renesas/Intel
vendors-specific controllers, to have registers, interrupts and clocks
properties. Though in case of Microsemi version of the controller
there must be two registers resources specified. Properties like
clock-names, reg-io-width, cs-gpio, num-cs, DMA and slave device
sub-nodes are optional.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200529182544.9807-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Silex Insight is a microelectronic company whose headquarter is located
in Belgium.
Web site of the company: https://www.silexinsight.com/
Signed-off-by: Olivier Sobrie <olivier.sobrie@silexinsight.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A test with the command below gives this error:
arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml:
touchscreen@3e: reg:0:0: 56 was expected
The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models
was shipped with different addresses then the binding currently allows.
Change the reg property that any address will pass.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/
edt-ft5x06.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Add documentation for the interconnects and interconnect-names
properties for USB.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Fix dt-binding-check issue
ti,gpi-config:0:0: 4 is greater than the maximum of 1
ti,gpi-config:0:1: 5 is greater than the maximum of 1
ti,gpi-config:0:2: 6 is greater than the maximum of 1
ti,gpi-config:0:3: 7 is greater than the maximum of 1
Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200528144711.18065-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series of uart controllers is able to work in IrDA mode.
This adds a property to the device tree to enable that feature on
selected ports if needed.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200529055058.1606910-2-daniel@zonque.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e8759ad17d ("serial: uapi: Add support for bus termination")
introduced the ability to enable rs485 bus termination from user space.
So far the feature is only used by a single driver, 8250_exar.c, using a
hardcoded GPIO pin specific to Siemens IOT2040 products.
Provide for a more generic solution by allowing specification of an
rs485 bus termination GPIO pin in the device tree. An upcoming commit
implements support for this pin for any 8250 driver. The binding is
used in device trees of the "Revolution Pi" PLCs offered by KUNBUS.
[Heiko Stuebner converted the binding to YAML, hence his Signed-off-by.]
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/4f4411895dc52c846f766e7f7207ec412c4811b6.1589811297.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit cd4b54e2ae as the
change should be coming in through Rob's tree instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit b88035625e as the file
should be coming in through Rob's tree instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1805cdde37 as it
should be going in through Rob's tree instead to resolve conflicts.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sandeep Maheswaram <sanm@codeaurora.org>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the binding documentation for vcodecsys.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1582278742-1626-4-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch adds the binding documentation for mipi0a.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Owen Chen <owen.chen@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1582278742-1626-3-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the Si5342, Si5344 and Si5345 chips. These are equivalent
to the Si5341 family, but with more clock input options (which are not
supported yet by this driver).
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Link: https://lkml.kernel.org/r/20200507061544.11388-1-mike.looijmans@topic.nl
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Renesas Multi-Function Timer Pulse Unit 2 (MTU2) Device Tree
binding documentation to json-schema.
Add missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX1 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX21 clock binding to DT schema format using json-schema,
can NOT find any CCM interrupt info from reference manual and DT file,
so interrupts property is removed from original binding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX25 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX27 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX23 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX28 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX31 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX35 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX5 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Converts documentation from txt format to yaml.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Document r8a7742 xhci support. The driver will use the fallback
compatible string "renesas,rcar-gen2-xhci", therefore no driver
change is needed.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Add USB PHY support for r8a7742 SoC. Renesas RZ/G1H (R8A7742)
USB PHY is identical to the R-Car Gen2 family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
The binding example is missing the fallback compatible.
This is needed as the driver only matches against mt6577.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>
A straightforward conversion of the ehci-mv binding to DT schema format
using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add unevaluatedProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
A straightforward conversion of the the spi-pxa2xx binding to DT schema
format using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add unevaluatedProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the marvell,mmp2-ccic binding to DT schema format using
json-schema. While at that this drops the "func" and "phy" clocks.
The driver consumes clocks with those names, but it's not clear
what are they for and they are not used in DT systems. "phy" is
probably a clock for the sensor and it would belong in the sensor
node.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add additionalProperties]
Signed-off-by: Rob Herring <robh@kernel.org>
In certain designs, it is possible to add a battery on a populated i2c
bus without an sbs compliant charger. In that case, the battery will
unnecessarily and sometimes undesirably master the bus trying to write
info in the charger.
It is observed in many occasion that these battery "broadcasts" are even
corrupting other ongoing master to slave communication. I.e. the
multi-master support in the battery is inadequate.
Thankfully, the CHARGER_MODE bit allows designers to disable that SBS
battery behaviour.
This needs to be done once when the battery is first seen on the bus.
Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
[rebased code]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Convert the i.MX thermal binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the ingenic,jz4780-nemc.txt doc file to ingenic,nemc.yaml.
The ingenic,jz4725b-nemc compatible string was added in the process,
with a fallback to ingenic,jz4740-nemc.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the MXS GPIO binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Document Device Tree bindings for the Renesas EMMA Mobile UART
Interface.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Renesas DDR Bus Controller Device Tree binding documentation
to json-schema.
Drop referrals to driver behavior.
Make power-domains required, as it is present for all current users.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
A generic GIC block embedded in an SoC may be connected to an on-SoC
reset controller. Hence allow the DTS writer to describe this relation,
by documenting the optional presence of a "reset" property.
This gets rid of "make dtbs_check" warnings like:
arch/arm/boot/dts/r8a7791-porter.dt.yaml: interrupt-controller@f1001000: 'resets' does not match any of the regexes: '^v2m@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm/boot/dts/r8a7740-armadillo800eva.dt.yaml: sound@fe1f0000: '#sound-dai-cells', 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the missing properties.
Update the example to match reality.
While at it, improve the document title, and comment the various
compatible values with the corresponding SoC names.
Fixes: 2f52475bac ("ASoC: fsi: switch to yaml base Documentation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm/boot/dts/r7s72100-rskrza1.dt.yaml: rtc@fcff1000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the missing power-domains property.
Update the example to match reality.
Fixes: 7ae8b2f5df ("dt-bindings: rtc: rtc-sh: convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
make dtbs_check:
arch/arm/boot/dts/r7s72100-genmai.dt.yaml: camera@e8210000: 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the missing properties.
Update the example to match reality.
Fixes: 58361eaa11 ("dt-bindings: media: renesas,ceu: Convert to yaml")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i.MX SYSCTR binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Florian Fainelli