This patch adapts handling of local interrupts to be more compliant with
the z/Architecture Principles of Operation and introduces a data
structure
which allows more efficient handling of interrupts.
* get rid of li->active flag, use bitmap instead
* Keep interrupts in a bitmap instead of a list
* Deliver interrupts in the order of their priority as defined in the
PoP
* Use a second bitmap for sigp emergency requests, as a CPU can have
one request pending from every other CPU in the system.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
A couple of our interception handlers rewind the PSW to the beginning
of the instruction to run the intercepted instruction again during the
next SIE entry. This normally works fine, but there is also the
possibility that the instruction did not get run directly but via an
EXECUTE instruction.
In this case, the PSW does not point to the instruction that caused the
interception, but to the EXECUTE instruction! So we've got to rewind the
PSW to the beginning of the EXECUTE instruction instead.
This is now accomplished with a new helper function kvm_s390_rewind_psw().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Using the new kvm_register_device_ops() interface makes us get rid of
an #ifdef in common code.
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We now propagate interrupt injection errors back to the ioctl. We
should mark functions that might fail with __must_check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Currently we just kill the userspace process and exit the thread
immediatly without making sure that we don't hold any locks etc.
Improve this by making KVM_RUN return -EFAULT if the lowcore is not
mapped during interrupt delivery. To achieve this we need to pass
the return code of guest memory access routines used in interrupt
delivery all the way back to the KVM_RUN ioctl.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Use the KVM_REQ_TLB_FLUSH request in order to trigger tlb flushes instead
of manipulating the SIE control block whenever we need it. Also trigger it for
a control register sync directly instead of (ab)using kvm_s390_set_prefix().
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The load PSW handler does not have to inject pending machine checks.
This can wait until the CPU runs the generic interrupt injection code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We can get rid of the tasklet used for waking up a VCPU in the hrtimer
code but wakeup the VCPU directly.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Let's move the vcpu wakeup code to a central point.
We should set the vcpu->preempted flag only if the target is actually sleeping
and before the real wakeup happens. Otherwise the preempted flag might be set,
when not necessary. This may result in immediate reschedules after schedule()
in some scenarios.
The wakeup code doesn't require the local_int.lock to be held.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch
- adds s390 specific MP states to linux headers and documents them
- implements the KVM_{SET,GET}_MP_STATE ioctls
- enables KVM_CAP_MP_STATE
- allows user space to control the VCPU state on s390.
If user space sets the VCPU state using the ioctl KVM_SET_MP_STATE, we can disable
manual changing of the VCPU state and trust user space to do the right thing.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function "__cpu_is_stopped" is not used any more. Let's remove it and
expose the function "is_vcpu_stopped" instead, which is actually what we want.
This patch also converts an open coded check for CPUSTAT_STOPPED to
is_vcpu_stopped().
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch splits the SIE state guest prefix at offset 4
into a prefix bit field. Additionally it provides the
access functions:
- kvm_s390_get_prefix()
- kvm_s390_set_prefix()
to access the prefix per vcpu.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL
operations will be interpreted instead of intercepted. A partial execution
interception will occurr at the sending cpu only if the target cpu is in the
wait state ("W" bit in the cpuflags set). Instruction interception will only
happen in error cases (e.g. cpu addr invalid).
As a sending cpu might set the external call interrupt pending flags at the
target cpu at every point in time, we can't handle this kind of interrupt using
our kvm interrupt injection mechanism. The injection will be done automatically
by the SIE when preparing the start of the target cpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Thomas Huth <thuth@linux.vnet.ibm.com>
[Adopt external call injection to check for sigp interpretion]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Rework the function kvm_arch_fault_in_sync() to become a proper helper
function for faulting-in a guest page. Now it takes the guest address as
a parameter and does not ignore the possible error code from gmap_fault()
anymore (which could cause undetected error conditions before).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
As a program status word is also invalid (and thus generates an
specification exception) if the instruction address is not even,
we should test this in is_valid_psw(), too. This patch also exports
the function so that it becomes available for other parts of the
S390 KVM code as well.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch introduces two new functions to set/clear the CPUSTAT_STOPPED bit and
makes use of it at all applicable places. These functions prepare the additional
execution of code when starting/stopping a vcpu.
The CPUSTAT_STOPPED bit should not be touched outside of these functions.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The generically assembled low core labels already contain the
address for the TDB.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
On hard exits (abort, sigkill) we have have some kvm_s390_interrupt_info
structures hanging around. Delete those on exit to avoid memory leaks.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: stable@vger.kernel.org
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).
All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The tpi instruction should be suppressed on addressing and protection
exceptions, so we need to re-inject the dequeued io interrupt in that
case.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add a 'struct kvm_s390_pgm_info pgm' member to kvm_vcpu_arch. This
structure will be used if during instruction emulation in the context
of a vcpu exception data needs to be stored somewhere.
Also add a helper function kvm_s390_inject_prog_cond() which can inject
vcpu's last exception if needed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Make test_vfacility() available for other files. This is needed for the
new guest access functions, which test if certain facilities are available
for a guest.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add a new data structure and function that allows to inject
all kinds of interrupt as defined in the PoP
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When userspace reset the guest without notifying kvm, the CMMA state
of the pages might be unused, resulting in guest data corruption.
To avoid this, CMMA must be enabled only if userspace understands
the implications.
CMMA must be enabled before vCPU creation. It can't be switched off
once enabled. All subsequently created vCPUs will be enabled for
CMMA according to the CMMA state of the VM.
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[remove now unnecessary calls to page_table_reset_pgste]
Pull kvm updates from Paolo Bonzini:
"PPC and ARM do not have much going on this time. Most of the cool
stuff, instead, is in s390 and (after a few releases) x86.
ARM has some caching fixes and PPC has transactional memory support in
guests. MIPS has some fixes, with more probably coming in 3.16 as
QEMU will soon get support for MIPS KVM.
For x86 there are optimizations for debug registers, which trigger on
some Windows games, and other important fixes for Windows guests. We
now expose to the guest Broadwell instruction set extensions and also
Intel MPX. There's also a fix/workaround for OS X guests, nested
virtualization features (preemption timer), and a couple kvmclock
refinements.
For s390, the main news is asynchronous page faults, together with
improvements to IRQs (floating irqs and adapter irqs) that speed up
virtio devices"
* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
KVM: PPC: Book3S HV: Add transactional memory support
KVM: Specify byte order for KVM_EXIT_MMIO
KVM: vmx: fix MPX detection
KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
KVM: s390: clear local interrupts at cpu initial reset
KVM: s390: Fix possible memory leak in SIGP functions
KVM: s390: fix calculation of idle_mask array size
KVM: s390: randomize sca address
KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
KVM: Bump KVM_MAX_IRQ_ROUTES for s390
KVM: s390: irq routing for adapter interrupts.
KVM: s390: adapter interrupt sources
...
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=7smd
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-20140325' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
3 fixes
- memory leak on certain SIGP conditions
- wrong size for idle bitmap (always too big)
- clear local interrupts on initial CPU reset
1 performance improvement
- improve performance with many guests on certain workloads
Empty list of local interrupts when vcpu goes through initial reset
to provide a clean state
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Add a new interface to register/deregister sources of adapter interrupts
identified by an unique id via the flic. Adapters may also be maskable
and carry a list of pinned pages.
These adapters will be used by irq routing later.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch enables Collaborative Memory Management (CMM) for kvm
on s390. CMM allows the guest to inform the host about page usage
(see arch/s390/mm/cmm.c). The host uses this information to avoid
swapping in unused pages in the page fault handler. Further, a CPU
provided list of unused invalid pages is processed to reclaim swap
space of not yet accessed unused pages.
[ Martin Schwidefsky: patch reordering and cleanup ]
Signed-off-by: Konstantin Weitz <konstantin.weitz@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch enables async page faults for s390 kvm guests.
It provides the userspace API to enable and disable_wait this feature.
The disable_wait will enforce that the feature is off by waiting on it.
Also it includes the diagnose code, called by the guest to enable async page faults.
The async page faults will use an already existing guest interface for this
purpose, as described in "CP Programming Services (SC24-6084)".
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
This patch enables transactional execution for KVM guests
on s390 systems zec12 or later.
We rework the allocation of the page containing the sie_block
to also back the Interception Transaction Diagnostic Block.
If available the TE facilities will be enabled.
Setting bit 73 and 50 in vfacilities bitmask reveals the HW
facilities Transactional Memory and Constraint Transactional
Memory respectively to the KVM guest.
Furthermore, the patch restores the Program-Interruption TDB
from the Interception TDB in case a program interception has
occurred and the ITDB has a valid format.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
The function kvm_s390_inject_sigp_stop() as been unused since the
removal of the old mmu reload code and thus can be removed safely.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIGP order STOP_AND_STORE_STATUS is defined to stop a CPU and store
its status. However, we only stored the status if the CPU was still
running, so make sure that the status is now also stored if the CPU was
already stopped. This fixes the problem that the CPU information was
not stored correctly in kdump files, rendering them unreadable.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
VIRTIODESCSPACE is completely unused nowadays and thus can be removed
without any problems.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIE_INTERCEPT_UCONTROL can be removed by moving the related code
from kvm_arch_vcpu_ioctl_run() to vcpu_post_run().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We're not always interested in both registers that are specified
for an RRE instruction. So allow NULL as parameter, too, to indicate
that we do not need the corresponding value.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The need for SIE_INTERCEPT_RERUNVCPU has been removed long ago already,
with the following commit:
f7850c9288
[S390] remove kvm mmu reload on s390
Since the remainders are dead code, they are now removed by this patch.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduced a helper function for setting the CC in the
guest PSW to improve the readability of the code.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The patch renames the array holding the HW facility bitmaps.
This allows to interprete the variable as set of virtual
machine specific "virtual" facilities. The basic idea is
to make virtual facilities externally managable in future.
An availability test for virtual facilites has been added
as well.
Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LCTL and LCTLG are also privileged instructions, thus there is no need for
treating them separately from the other instructions in priv.c. So this
patch moves these two instructions to priv.c, adds a check for supervisor
state and simplifies the "handle_eb" instruction decoding by merging the
two eb_handlers jump tables from intercept.c and priv.c into one table only.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch enables kvm to give large pages to the guest. The heavy
lifting is done by the hardware, the host only has to take care
of the PFMF instruction, which is also part of EDAT-1.
We also support the non-quiescing key setting facility if the host
supports it, to behave similar to the interpretation of sske.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest prefix pages must be mapped writeable all the time
while SIE is running, otherwise the guest might see random
behaviour. (pinned at the pte level) Turns out that mlocking is
not enough, the page table entry (not the page) might change or
become r/o. This patch uses the gmap notifiers to kick guest
cpus out of SIE.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Lets provide functions to prevent KVM from reentering SIE and
to kick cpus out of SIE. We cannot use the common kvm_vcpu_kick code,
since we need to kick out guests in places that hold architecture
specific locks (e.g. pgste lock) which might be necessary on the
other cpus - so no waiting possible.
So lets provide a bit in a private field of the sie control block
that acts as a gate keeper, after we claimed we are in SIE.
Please note that we do not reuse prog0c, since we want to access
that bit without atomic ops.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
kvm_s390_inject_program_int() and friends may fail if no memory is available.
This must be reported to the calling functions, so that this gets passed
down to user space which should fix the situation.
Alternatively we end up with guest state corruption.
So fix this and enforce return value checking by adding a __must_check
annotation to all of these function prototypes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Instructions with long displacement have a signed displacement.
Currently the sign bit is interpreted as 2^20: Lets fix it by doing the
sign extension from 20bit to 32bit and then use it as a signed variable
in the addition (see kvm_s390_get_base_disp_rsy).
Furthermore, there are lots of "int" in that code. This is problematic,
because shifting on a signed integer is undefined/implementation defined
if the bit value happens to be negative.
Fortunately the promotion rules will make the right hand side unsigned
anyway, so there is no real problem right now.
Let's convert them anyway to unsigned where appropriate to avoid
problems if the code is changed or copy/pasted later on.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:
- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
related processing.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Explicitely catch all channel I/O related instructions intercepts
in the kernel and set condition code 3 for them.
This paves the way for properly handling these instructions later
on.
Note: This is not architecture compliant (the previous code wasn't
either) since setting cc 3 is not the correct thing to do for some
of these instructions. For Linux guests, however, it still has the
intended effect of stopping css probing.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Add support for injecting machine checks (only repressible
conditions for now).
This is a bit more involved than I/O interrupts, for these reasons:
- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
a roundabout approach with trapping PSW changing instructions and
watching for opened machine checks.
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jens Freimann