Commit Graph

395 Commits

Author SHA1 Message Date
Steve French ebcc943c11 Add missing end of line termination to some cifs messages
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Gregor Beck <gbeck@sernet.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
2013-12-27 15:14:44 -06:00
Steve French b1d9335642 setfacl removes part of ACL when setting POSIX ACLs to Samba
setfacl over cifs mounts can remove the default ACL when setting the
(non-default part of) the ACL and vice versa (we were leaving at 0
rather than setting to -1 the count field for the unaffected
half of the ACL.  For example notice the setfacl removed
the default ACL in this sequence:

steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir ; setfacl
-m default:user:test:rwx,user:test:rwx /mnt/test-dir
getfacl: Removing leading '/' from absolute path names
user::rwx
group::r-x
other::r-x
default:user::rwx
default:user:test:rwx
default:group::r-x
default😷:rwx
default:other::r-x

steven@steven-GA-970A-DS3:~/cifs-2.6$ getfacl /mnt/test-dir
getfacl: Removing leading '/' from absolute path names
user::rwx
user:test:rwx
group::r-x
mask::rwx
other::r-x

CC: Stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeremy Allison <jra@samba.org>
2013-11-15 20:50:58 -06:00
Steve French c7f508a99b Allow setting per-file compression via CIFS protocol
An earlier patch allowed setting the per-file compression flag

"chattr +c filename"

on an smb2 or smb3 mount, and also allowed lsattr to return
whether a file on a cifs, or smb2/smb3 mount was compressed.

This patch extends the ability to set the per-file
compression flag to the cifs protocol, which uses a somewhat
different IOCTL mechanism than SMB2, although the payload
(the flags stored in the compression_state) are the same.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02 12:52:44 -05:00
Steve French c31f330719 do not treat non-symlink reparse points as valid symlinks
Windows 8 and later can create NFS symlinks (within reparse points)
which we were assuming were normal NTFS symlinks and thus reporting
corrupt paths for.  Add check for reparse points to make sure that
they really are normal symlinks before we try to parse the pathname.

We also should not be parsing other types of reparse points (DFS
junctions etc) as if they were a  symlink so return EOPNOTSUPP
on those.  Also fix endian errors (we were not parsing symlink
lengths as little endian).

This fixes commit d244bf2dfb
which implemented follow link for non-Unix CIFS mounts

CC: Stable <stable@kernel.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-10-05 21:54:18 -05:00
Jeff Layton 9ae6cf606a cifs: stop trying to use virtual circuits
Currently, we try to ensure that we use vcnum of 0 on the first
established session on a connection and then try to use a different
vcnum on each session after that.

This is a little odd, since there's no real reason to use a different
vcnum for each SMB session. I can only assume there was some confusion
between SMB sessions and VCs. That's somewhat understandable since they
both get created during SESSION_SETUP, but the documentation indicates
that they are really orthogonal. The comment on max_vcs in particular
looks quite misguided. An SMB session is already uniquely identified
by the SMB UID value -- there's no need to again uniquely ID with a
VC.

Furthermore, a vcnum of 0 is a cue to the server that it should release
any resources that were previously held by the client. This sounds like
a good thing, until you consider that:

a) it totally ignores the fact that other programs on the box (e.g.
smbclient) might have connections established to the server. Using a
vcnum of 0 causes them to get kicked off.

b) it causes problems with NAT. If several clients are connected to the
same server via the same NAT'ed address, whenever one connects to the
server it kicks off all the others, which then reconnect and kick off
the first one...ad nauseum.

I don't see any reason to ignore the advice in "Implementing CIFS" which
has a comprehensive treatment of virtual circuits. In there, it states
"...and contrary to the specs the client should always use a VcNumber of
one, never zero."

Have the client just use a hardcoded vcnum of 1, and stop abusing the
special behavior of vcnum 0.

Reported-by: Sauron99@gmx.de <sauron99@gmx.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-18 10:23:44 -05:00
Pavel Shilovsky d244bf2dfb CIFS: Implement follow_link for nounix CIFS mounts
by using a query reparse ioctl request.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:27:41 -05:00
David Disseldorp 7ac0febb81 cifs: fill TRANS2_QUERY_FILE_INFO ByteCount fields
Currently the trans2 ByteCount field is incorrectly left zero in
TRANS2_QUERY_FILE_INFO info_level=SMB_QUERY_FILE_ALL_INFO and
info_level=SMB_QUERY_FILE_UNIX_BASIC requests. The field should properly
reflect the FID, information_level and padding bytes carried in these
requests.

Leaving this field zero causes such requests to fail against Novell CIFS
servers. Other SMB servers (e.g. Samba) use the parameter count fields
for data length calculations instead, so do not suffer the same fate.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-29 00:09:44 -05:00
Jeff Layton 50285882fd cifs: fix SMB2 signing enablement in cifs_enable_signing
Commit 9ddec56131 (cifs: move handling of signed connections into
separate function) broke signing on SMB2/3 connections. While the code
to enable signing on the connections was very similar between the two,
the bits that get set in the sec_mode are different.

Declare a couple of new smb_version_values fields and set them
appropriately for SMB1 and SMB2/3. Then change cifs_enable_signing to
use those instead.

Reported-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-27 23:42:18 -05:00
Jeff Layton 3f618223dc move sectype to the cifs_ses instead of TCP_Server_Info
Now that we track what sort of NEGOTIATE response was received, stop
mandating that every session on a socket use the same type of auth.

Push that decision out into the session setup code, and make the sectype
a per-session property. This should allow us to mix multiple sectypes on
a socket as long as they are compatible with the NEGOTIATE response.

With this too, we can now eliminate the ses->secFlg field since that
info is redundant and harder to work with than a securityEnum.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:44 -05:00
Jeff Layton 38d77c50b4 cifs: track the enablement of signing in the TCP_Server_Info
Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.

Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.

This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:43 -05:00
Jeff Layton e598d1d8fb cifs: track the flavor of the NEGOTIATE reponse
Track what sort of NEGOTIATE response we get from the server, as that
will govern what sort of authentication types this socket will support.

There are three possibilities:

LANMAN: server sent legacy LANMAN-type response

UNENCAP: server sent a newer-style response, but extended security bit
wasn't set. This socket will only support unencapsulated auth types.

EXTENDED: server sent a newer-style response with the extended security
bit set. This is necessary to support krb5 and ntlmssp auth types.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:42 -05:00
Jeff Layton 9193400b69 cifs: factor out check for extended security bit into separate function
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:42 -05:00
Jeff Layton 9ddec56131 cifs: move handling of signed connections into separate function
Move the sanity checks for signed connections into a separate function.
SMB2's was a cut-and-paste job from CIFS code, so we can make them use
the same function.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:41 -05:00
Jeff Layton 2190eca1d0 cifs: break out lanman NEGOTIATE handling into separate function
...this also gets rid of some #ifdef ugliness too.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-06-24 01:56:41 -05:00
Jeff Layton 31d9e2bd5f cifs: break out decoding of security blob into separate function
...cleanup.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-06-24 01:56:41 -05:00
Jeff Layton 3534b8508e cifs: throw a warning if negotiate or sess_setup ops are passed NULL server or session pointers
These look pretty cargo-culty to me, but let's be certain. Leave
them in place for now. Pop a WARN if it ever does happen. Also,
move to a more standard idiom for setting the "server" pointer.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-06-24 01:56:40 -05:00
Jeff Layton 0124cc4511 cifs: store the real expected sequence number in the mid
Currently, the signing routines take a pointer to a place to store the
expected sequence number for the mid response. It then stores a value
that's one below what that sequence number should be, and then adds one
to it when verifying the signature on the response.

Increment the sequence number before storing the value in the mid, and
eliminate the "+1" when checking the signature.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:18:01 -05:00
Joe Perches f96637be08 [CIFS] cifs: Rename cERROR and cFYI to cifs_dbg
It's not obvious from reading the macro names that these macros
are for debugging.  Convert the names to a single more typical
kernel style cifs_dbg macro.

	cERROR(1, ...)   -> cifs_dbg(VFS, ...)
	cFYI(1, ...)     -> cifs_dbg(FYI, ...)
	cFYI(DBG2, ...)  -> cifs_dbg(NOISY, ...)

Move the terminating format newline from the macro to the call site.

Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.

Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)

$ size fs/cifs/cifs.ko*
   text    data     bss     dec     hex filename
 265245	   2525	    132	 267902	  4167e	fs/cifs/cifs.ko.new
 268359    2525     132  271016   422a8 fs/cifs/cifs.ko.old

Other miscellaneous changes around these conversions:

o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
  from the macros to be more kernel style like.  A few formats
  previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
  added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:17:23 -05:00
Silviu-Mihai Popescu f7f7c1850e fs: cifs: use kmemdup instead of kmalloc + memcpy
This replaces calls to kmalloc followed by memcpy with a single call to
kmemdup. This was found via make coccicheck.

Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-05-04 22:08:19 -05:00
Jeff Layton 94e1800768 cifs: don't try to unlock pagecache page after releasing it
We had a recent fix to fix the release of pagecache pages when
cifs_writev_requeue writes fail. Unfortunately, it releases the page
before trying to unlock it. At that point, the page might be gone by the
time the unlock comes in.

Unlock the page first before checking the value of "rc", and only then
end writeback and release the pages. The page lock isn't required for
any of those operations so this should be safe.

Reported-by: Anton Altaparmakov <aia21@cam.ac.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-03-06 19:03:57 -06:00
Ouyang Maochun c51bb0ea40 cifs: bugfix for unreclaimed writeback pages in cifs_writev_requeue()
Pages get the PG_writeback flag set before cifs sends its
request to SMB server in cifs_writepages(), if the SMB service
goes down, cifs may try to recommit the writing requests in
cifs_writev_requeue(). However, it does not clean its PG_writeback
flag and relaimed the pages even if it fails again in
cifs_writev_requeue(), which may lead to the hanging of the
processes accessing the cifs directory. This patch just cleans
the PG_writeback flags and reclaims the pages under that circumstances.

    Steps to reproduce the bug(trying serveral times may trigger the issue):
    1.Write from cifs client continuously.(e.g dd if=/dev/zero of=<cifs file>)
    2.Stop SMB service from server.(e.g service smb stop)
    3.Wait for two minutes, and then start SMB service from
server.(e.g service smb start)
    4.The processes which are accessing cifs directory may hang up.

Signed-off-by: Ouyang Maochun <ouyang.maochun@zte.com.cn>
Signed-off-by: Jiang Yong <jian.yong5@zte.com.cn>
Tested-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Reviewed-by: Wang Liang <wang.liang82@zte.com.cn>
Reviewed-by: Cai Qu <cai.qu@zte.com.cn>
Reviewed-by: Jiang Biao <jiang.biao2@zte.com.cn>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-02-28 09:01:47 -06:00
Eric W. Biederman 49418b2c28 cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
Use INVALID_UID and INVALID_GID instead of NO_CHANGE_64 to indicate
the value should not be changed.

In cifs_fill_unix_set_info convert from kuids and kgids into uids and
gids that will fit in FILE_UNIX_BASIC_INFO.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:49 -08:00
Shirish Pargaonkar c052e2b423 cifs: obtain file access during backup intent lookup (resend)
Rebased and resending the patch.

Path based queries can fail for lack of access, especially during lookup
during open.
open itself would actually succeed becasue of back up intent bit
but queries (either path or file handle based) do not have a means to
specifiy backup intent bit.
So query the file info during lookup using
 trans2 / findfirst / file_id_full_dir_info
to obtain file info as well as file_id/inode value.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-28 15:32:28 -05:00
Jeff Layton 5819575ec6 cifs: replace kvec array in readdata with a single kvec
The array is no longer needed. We just need a single kvec to hold the
header for signature checking.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-09-24 21:46:32 -05:00
Jeff Layton 8321fec436 cifs: convert async read code to use pages array without kmapping
Replace the "marshal_iov" function with a "read_into_pages" function.
That function will copy the read data off the socket and into the
pages array, kmapping and reading pages one at a time.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-09-24 21:46:32 -05:00
Jeff Layton eddb079deb cifs: convert async write code to pass in data via rq_pages array
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:31 -05:00
Jeff Layton fec344e3f3 cifs: change cifs_call_async to use smb_rqst structs
For now, none of the callers populate rq_pages. That will be done for
writes in a later patch. While we're at it, change the prototype of
setup_async_request not to need a return pointer argument. Just
return the pointer to the mid_q_entry or an ERR_PTR.

Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:31 -05:00
Jeff Layton bf5ea0e2f2 cifs: change signing routines to deal with smb_rqst structs
We need a way to represent a call to be sent on the wire that does not
require having all of the page data kmapped. Behold the smb_rqst struct.
This new struct represents an array of kvecs immediately followed by an
array of pages.

Convert the signing routines to use these structs under the hood and
turn the existing functions for this into wrappers around that. For now,
we're just changing these functions to take different args. Later, we'll
teach them how to deal with arrays of pages.

Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:30 -05:00
Pavel Shilovsky d143341815 CIFS: Move set_file_size to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:29 -05:00
Steve French d6e906f1b5 CIFS: Move hardlink to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:29 -05:00
Pavel Shilovsky 8ceb984379 CIFS: Move rename to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky ba9ad7257a CIFS: Move writepage to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky 3331914125 CIFS: Add SMB2 support for cifs_iovec_write
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky c9de5c80d5 CIFS: Move async write to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:28 -05:00
Pavel Shilovsky 09a4707e76 CIFS: Add SMB2 support for cifs_iovec_read
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:27 -05:00
Pavel Shilovsky 4b4de76e35 CIFS: Replace netfid with cifs_fid struct in cifsFileInfo
This is help us to extend the code for future protocols that can use
another fid mechanism (as SMB2 that has it divided into two parts:
persistent and violatile).

Also rename variables and refactor the code around the changes.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:26 -05:00
Pavel Shilovsky ed6875e0d6 CIFS: Move unlink code to ops struct
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-09-24 21:46:26 -05:00
Steve French 985e4ff016 cifs: print error code if smb signature verification fails
While trying to debug a SMB signature related issue with Windows Servers
figured out it might be easier to debug if we print the error code from
cifs_verify_signature(). Also, fix indendation while at it.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-08-19 22:30:13 -05:00
Pavel Shilovsky f958ca5d88 CIFS: Move rmdir code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27 15:17:47 -05:00
Pavel Shilovsky f436720e94 CIFS: Separate protocol specific part from mkdir
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27 15:17:40 -05:00
Pavel Shilovsky ff691e9694 CIFS: Simplify cifs_mkdir call
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-27 15:17:16 -05:00
Pavel Shilovsky 44c581866e CIFS: Move clear/print_stats code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:55:18 +04:00
Pavel Shilovsky 1208ef1f76 CIFS: Move query inode info code to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:55:07 +04:00
Pavel Shilovsky 68889f269b CIFS: Move is_path_accessible to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:55:04 +04:00
Pavel Shilovsky b669f33ca6 CIFS: Move getting dfs referalls to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:55:01 +04:00
Pavel Shilovsky aa24d1e969 CIFS: Process reconnects for SMB2 shares
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:54:59 +04:00
Pavel Shilovsky ec2e4523fd CIFS: Add capability to send SMB2 negotiate message
and add negotiate request type to let set_credits know that
we are only on negotiate stage and no need to make a decision
about disabling echos and oplocks.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 21:54:55 +04:00
Pavel Shilovsky 6d5786a34d CIFS: Rename Get/FreeXid and make them work with unsigned int
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 10:25:08 -05:00
Pavel Shilovsky 2e6e02ab6d CIFS: Move protocol specific tcon/tdis code to ops struct
and rename variables around the code changes.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 10:25:06 -05:00
Pavel Shilovsky 58c45c58a1 CIFS: Move protocol specific session setup/logoff code to ops struct
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 10:25:03 -05:00
Pavel Shilovsky 286170aa24 CIFS: Move protocol specific negotiate code to ops struct
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 00:33:26 -05:00
Pavel Shilovsky a891f0f895 CIFS: Extend credit mechanism to process request type
Split all requests to echos, oplocks and others - each group uses
its own credit slot. This is indicated by new flags

CIFS_ECHO_OP and CIFS_OBREAK_OP

that are not used now for CIFS. This change is required to support
SMB2 protocol because of different processing of these commands.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-24 00:32:48 -05:00
Jeff Layton c5fd363d77 cifs: move file_lock off stack in cifs_push_posix_locks
struct file_lock is pretty large, so we really don't want that on the
stack in a potentially long call chain. Reorganize the arguments to
CIFSSMBPosixLock to eliminate the need for that.

Eliminate the get_flag and simply use a non-NULL pLockInfo to indicate
that this is a "get" operation. In order to do that, need to add a new
loff_t argument for the start_offset.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-23 16:36:29 -05:00
Jeff Layton ac3aa2f8ae cifs: remove extraneous newlines from cERROR and cFYI calls
Those macros add a newline on their own, so there's not any need to
embed one in the message itself.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-23 16:36:26 -05:00
Jeff Layton 3cf003c08b cifs: when CONFIG_HIGHMEM is set, serialize the read/write kmaps
Jian found that when he ran fsx on a 32 bit arch with a large wsize the
process and one of the bdi writeback kthreads would sometimes deadlock
with a stack trace like this:

crash> bt
PID: 2789   TASK: f02edaa0  CPU: 3   COMMAND: "fsx"
 #0 [eed63cbc] schedule at c083c5b3
 #1 [eed63d80] kmap_high at c0500ec8
 #2 [eed63db0] cifs_async_writev at f7fabcd7 [cifs]
 #3 [eed63df0] cifs_writepages at f7fb7f5c [cifs]
 #4 [eed63e50] do_writepages at c04f3e32
 #5 [eed63e54] __filemap_fdatawrite_range at c04e152a
 #6 [eed63ea4] filemap_fdatawrite at c04e1b3e
 #7 [eed63eb4] cifs_file_aio_write at f7fa111a [cifs]
 #8 [eed63ecc] do_sync_write at c052d202
 #9 [eed63f74] vfs_write at c052d4ee
#10 [eed63f94] sys_write at c052df4c
#11 [eed63fb0] ia32_sysenter_target at c0409a98
    EAX: 00000004  EBX: 00000003  ECX: abd73b73  EDX: 012a65c6
    DS:  007b      ESI: 012a65c6  ES:  007b      EDI: 00000000
    SS:  007b      ESP: bf8db178  EBP: bf8db1f8  GS:  0033
    CS:  0073      EIP: 40000424  ERR: 00000004  EFLAGS: 00000246

Each task would kmap part of its address array before getting stuck, but
not enough to actually issue the write.

This patch fixes this by serializing the marshal_iov operations for
async reads and writes. The idea here is to ensure that cifs
aggressively tries to populate a request before attempting to fulfill
another one. As soon as all of the pages are kmapped for a request, then
we can unlock and allow another one to proceed.

There's no need to do this serialization on non-CONFIG_HIGHMEM arches
however, so optimize all of this out when CONFIG_HIGHMEM isn't set.

Cc: <stable@vger.kernel.org>
Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-07-16 23:57:14 -05:00
Pavel Shilovsky 8825736060 CIFS: Move get_next_mid to ops struct
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-06-01 12:35:19 -05:00
Pavel Shilovsky 452757897a CIFS: Move add/set_credits and get_credits_field to ops structure
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23 12:33:12 +04:00
Pavel Shilovsky eb37871118 CIFS: Move protocol specific part from cifs_readv_receive to ops struct
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23 12:33:09 +04:00
Pavel Shilovsky 1887f60103 CIFS: Move header_size/max_header_size to ops structure
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-23 12:33:08 +04:00
Shirish Pargaonkar 2608bee744 cifs: Include backup intent search flags during searches {try #2)
As observed and suggested by Tushar Gosavi...

---------
readdir calls these function to send TRANS2_FIND_FIRST and
TRANS2_FIND_NEXT command to the server. The current cifs module is
not specifying CIFS_SEARCH_BACKUP_SEARCH flag while sending these
command when backupuid/backupgid is specified. This can be resolved
by specifying CIFS_SEARCH_BACKUP_SEARCH flag.
---------

Cc: <stable@kernel.org>
Reported-and-Tested-by: Tushar Gosavi <tugosavi@in.ibm.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-17 13:07:49 +04:00
Jeff Layton 6993f74a5b cifs: add refcounting to cifs_readdata structures
This isn't strictly necessary for the async readpages code, but the
uncached version will need to be able to collect the replies after
issuing the calls. Add a kref to cifs_readdata and use change the
code to take and put references appropriately.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16 20:13:30 -05:00
Jeff Layton 8d5ce4d23c cifs: abstract out function to marshal the iovec for readv receives
Cached and uncached reads will need to do different things here to
handle the difference when the pages are in pagecache and not. Abstract
out the function that marshals the page list into a kvec array.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16 20:13:29 -05:00
Jeff Layton 0471ca3fe4 cifs: make cifs_readdata_alloc take a work_func_t arg
We'll need different completion routines for an uncached read. Allow
the caller to set the one he needs at allocation time. Also, move
most of these functions to file.c so we can make more of them static.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-05-16 20:13:29 -05:00
Stefan Metzmacher d8f2799b10 fs/cifs: fix parsing of dfs referrals
The problem was that the first referral was parsed more than once
and so the caller tried the same referrals multiple times.

The problem was introduced partly by commit
066ce68994,
where 'ref += le16_to_cpu(ref->Size);' got lost,
but that was also wrong...

Cc: <stable@vger.kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Tested-by: Björn Jacke <bj@sernet.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-05-03 22:47:39 -05:00
Jeff Layton b2a3ad9ca5 cifs: silence compiler warnings showing up with gcc-4.7.0
gcc-4.7.0 has started throwing these warnings when building cifs.ko.

  CC [M]  fs/cifs/cifssmb.o
fs/cifs/cifssmb.c: In function ‘CIFSSMBSetCIFSACL’:
fs/cifs/cifssmb.c:3905:9: warning: array subscript is above array bounds [-Warray-bounds]
fs/cifs/cifssmb.c: In function ‘CIFSSMBSetFileInfo’:
fs/cifs/cifssmb.c:5711:8: warning: array subscript is above array bounds [-Warray-bounds]
fs/cifs/cifssmb.c: In function ‘CIFSSMBUnixSetFileInfo’:
fs/cifs/cifssmb.c:6001:25: warning: array subscript is above array bounds [-Warray-bounds]

This patch cleans up the code a bit by using the offsetof macro instead
of the funky "&pSMB->hdr.Protocol" construct.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-31 17:31:25 -05:00
Jeff Layton da82f7e755 cifs: convert cifs_iovec_write to use async writes
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:40:56 -04:00
Jeff Layton 597b027f69 cifs: call cifs_update_eof with i_lock held
cifs_update_eof has the potential to be racy if multiple threads are
trying to modify it at the same time. Protect modifications of the
server_eof value with the inode->i_lock.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
2012-03-23 14:40:56 -04:00
Jeff Layton e9492871fb cifs: abstract out function to marshal up the iovec array for async writes
We'll need to do something a bit different depending on the caller.
Abstract the code that marshals the page array into an iovec.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:40:56 -04:00
Jeff Layton c2e8764009 cifs: allow caller to specify completion op when allocating writedata
We'll need a different set of write completion ops when not writing out
of the pagecache.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:40:55 -04:00
Jeff Layton fe5f5d2e90 cifs: add pid field to cifs_writedata
We'll need this to handle rwpidforward option correctly when we use
async writes in the aio_write op.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:40:55 -04:00
Jeff Layton da472fc847 cifs: add new cifsiod_wq workqueue
...and convert existing cifs users of system_nrt_wq to use that instead.

Also, make it freezable, and set WQ_MEM_RECLAIM since we use it to
deal with write reply handling.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
2012-03-23 14:40:53 -04:00
Pavel Shilovsky 7c9421e1a9 CIFS: Change mid_q_entry structure fields
to be protocol-unspecific and big enough to keep both CIFS
and SMB2 values.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:28:03 -04:00
Pavel Shilovsky 5ffef7bf1d CIFS: Separate protocol-specific code from cifs_readv_receive code
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:28:03 -04:00
Pavel Shilovsky 792af7b05b CIFS: Separate protocol-specific code from transport routines
that lets us use this functions for SMB2.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
2012-03-23 14:28:02 -04:00
Pavel Shilovsky 2d86dbc970 CIFS: Introduce credit-based flow control
and send no more than credits value requests at once. For SMB/CIFS
it's trivial: increment this value by receiving any message and
decrement by sending one.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-21 11:35:03 -05:00
Pavel Shilovsky fc40f9cf82 CIFS: Simplify inFlight logic
by making it as unsigned integer and surround access with req_lock
from server structure.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2012-03-21 11:27:35 -05:00
Pavel Shilovsky 10b9b98e41 CIFS: Respect negotiated MaxMpxCount
Some servers sets this value less than 50 that was hardcoded and
we lost the connection if when we exceed this limit. Fix this by
respecting this value - not sending more than the server allows.

Cc: stable@kernel.org
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <stevef@smf-gateway.(none)>
2012-03-20 10:17:40 -05:00
Steve French acbbb76a26 CIFS: Rename *UCS* functions to *UTF16*
to reflect the unicode encoding used by CIFS protocol.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@samba.org>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
2012-01-18 22:32:33 -06:00
Pavel Shilovsky 9ee305b70e CIFS: Send as many mandatory unlock ranges at once as possible
that reduces a traffic and increases a performance.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24 13:11:52 -05:00
Pavel Shilovsky 4f6bcec910 CIFS: Implement caching mechanism for posix brlocks
to handle all lock requests on the client in an exclusive oplock case.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-24 12:29:27 -05:00
Pavel Shilovsky a2d6b6cacb CIFS: Fix error handling in cifs_readv_complete
In cifs_readv_receive we don't update rdata->result to error value
after kmap'ing a page. We should kunmap the page in the no error
case only.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-21 09:21:04 -05:00
Jeff Layton e28bc5b1fd cifs: add cifs_async_readv
...which will allow cifs to do an asynchronous read call to the server.
The caller will allocate and set up cifs_readdata for each READ_AND_X
call that should be issued on the wire. The pages passed in are added
to the pagecache, but not placed on the LRU list yet (as we need the
page->lru to keep the pages on the list in the readdata).

When cifsd identifies the mid, it will see that there is a special
receive handler for the call, and use that to receive the rest of the
frame. cifs_readv_receive will then marshal up a kvec array with
kmapped pages from the pagecache, which eliminates one copy of the
data. Once the data is received, the pages are added to the LRU list,
set uptodate, and unlocked.

Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2011-10-19 15:30:07 -04:00
Jeff Layton 44d22d846f cifs: add a callback function to receive the rest of the frame
In order to handle larger SMBs for readpages and other calls, we want
to be able to read into a preallocated set of buffers. Rather than
changing all of the existing code to preallocate buffers however, we
instead add a receive callback function to the MID.

cifsd will call this function once the mid_q_entry has been identified
in order to receive the rest of the SMB. If the mid can't be identified
or the receive pointer is unset, then the standard 3rd phase receive
function will be called.

Reviewed-and-Tested-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2011-10-19 15:29:49 -04:00
Shirish Pargaonkar a5ff376966 cifs: Call id to SID mapping functions to change owner/group (try #4 repost)
Now build security descriptor to change either owner or group at the
server.  Initially security descriptor was built to change only
(D)ACL, that functionality has been extended.

When either an Owner or a Group of a file object at the server is changed,
rest of security descriptor remains same (DACL etc.).

To set security descriptor, it is necessary to open that file
with permission bits of either WRITE_DAC if DACL is being modified or
WRITE_OWNER (Take Ownership) if Owner or Group is being changed.

It is the server that decides whether a set security descriptor with
either owner or group change succeeds or not.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-17 09:11:11 -05:00
Pavel Shilovsky 03776f4516 CIFS: Simplify byte range locking code
Split cifs_lock into several functions and let CIFSSMBLock get pid
as an argument.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-13 17:16:28 -05:00
Jeff Layton c974befa40 cifs: untangle server->maxBuf and CIFSMaxBufSize
server->maxBuf is the maximum SMB size (including header) that the
server can handle. CIFSMaxBufSize is the maximum amount of data (sans
header) that the client can handle. Currently maxBuf is being capped at
CIFSMaxBufSize + the max headers size, and the two values are used
somewhat interchangeably in the code.

This makes little sense as these two values are not related at all.
Separate them and make sure the code uses the right values in the right
places.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-12 23:41:32 -05:00
Jeff Layton ac423446d8 cifs: switch CIFSSMBQAllEAs to use memcmp
...as that's more efficient when we know that the lengths are equal.

Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2011-10-12 23:41:14 -05:00
Jeff Layton 9438fabb73 cifs: fix possible memory corruption in CIFSFindNext
The name_len variable in CIFSFindNext is a signed int that gets set to
the resume_name_len in the cifs_search_info. The resume_name_len however
is unsigned and for some infolevels is populated directly from a 32 bit
value sent by the server.

If the server sends a very large value for this, then that value could
look negative when converted to a signed int. That would make that
value pass the PATH_MAX check later in CIFSFindNext. The name_len would
then be used as a length value for a memcpy. It would then be treated
as unsigned again, and the memcpy scribbles over a ton of memory.

Fix this by making the name_len an unsigned value in CIFSFindNext.

Cc: <stable@kernel.org>
Reported-by: Darren Lavender <dcl@hppine99.gbr.hp.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-09-19 21:14:40 -05:00
Jeff Layton c4a5534a1b cifs: remove unneeded variable initialization in cifs_reconnect_tcon
Reported-and-acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-07-31 21:27:16 +00:00
Jeff Layton 5980fc966b cifs: fix compiler warning in CIFSSMBQAllEAs
The recent fix to the above function causes this compiler warning to pop
on some gcc versions:

  CC [M]  fs/cifs/cifssmb.o
fs/cifs/cifssmb.c: In function ‘CIFSSMBQAllEAs’:
fs/cifs/cifssmb.c:5708: warning: ‘ea_name_len’ may be used uninitialized in
this function

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-07-31 21:21:13 +00:00
Jeff Layton 91d065c473 cifs: fix name parsing in CIFSSMBQAllEAs
The code that matches EA names in CIFSSMBQAllEAs is incorrect. It
uses strncmp to do the comparison with the length limited to the
name_len sent in the response.

Problem: Suppose we're looking for an attribute named "foobar" and
have an attribute before it in the EA list named "foo". The
comparison will succeed since we're only looking at the first 3
characters. Fix this by also comparing the length of the provided
ea_name with the name_len in the response. If they're not equal then
it shouldn't match.

Reported-by: Jian Li <jiali@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-07-31 21:21:09 +00:00
Steve French 96daf2b091 [CIFS] Rename three structures to avoid camel case
secMode to sec_mode
and
cifsTconInfo to cifs_tcon
and
cifsSesInfo to cifs_ses

Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-27 04:34:02 +00:00
Steve French 07cc6cf9ef Fix extended security auth failure
Fix authentication failures using extended security mechanisms.
cifs client does not take into consideration extended security bit
in capabilities field in negotiate protocol response from the server.

Please refer to Samba bugzilla 8046.

Reported-and-tested by: Werner Maes <Werner.Maes@icts.kuleuven.be>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-27 04:21:29 +00:00
Pavel Shilovsky d4ffff1fa9 CIFS: Add rwpidforward mount option
Add rwpidforward mount option that switches on a mode when we forward
pid of a process who opened a file to any read and write operation.

This can prevent applications like WINE from failing on read or write
operation on a previously locked file region from the same netfd from
another process if we use mandatory brlock style.

It is actual for WINE because during a run of WINE program two processes
work on the same netfd - share the same file struct between several VFS
fds:
1) WINE-server does open and lock;
2) WINE-application does read and write.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-27 03:57:16 +00:00
Pavel Shilovsky fa2989f447 CIFS: Use pid saved from cifsFileInfo in writepages and set_file_size
We need it to make them work with mandatory locking style because
we can fail in a situation like when kernel need to flush dirty pages
and there is a lock held by a process who opened file.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-26 18:07:02 +00:00
Jeff Layton c28c89fc43 cifs: add cifs_async_writev
Add the ability for CIFS to do an asynchronous write. The kernel will
set the frame up as it would for a "normal" SMBWrite2 request, and use
cifs_call_async to send it. The mid callback will then be configured to
handle the result.

Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-25 20:38:33 +00:00
Jeff Layton 59ffd84141 cifs: add ignore_pend flag to cifs_call_async
The current code always ignores the max_pending limit. Have it instead
only optionally ignore the pending limit. For CIFSSMBEcho, we need to
ignore it to make sure they always can go out. For async reads, writes
and potentially other calls, we need to respect it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-23 02:59:16 +00:00
Jeff Layton fcc31cb6f1 cifs: make cifs_send_async take a kvec array
We'll need this for async writes, so convert the call to take a kvec
array. CIFSSMBEcho is changed to put a kvec on the stack and pass
in the SMB buffer using that.

Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-23 02:58:26 +00:00
Jeff Layton 820a803ffa cifs: keep BCC in little-endian format
This is the same patch as originally posted, just with some merge
conflicts fixed up...

Currently, the ByteCount is usually converted to host-endian on receive.
This is confusing however, as we need to keep two sets of routines for
accessing it, and keep track of when to use each routine. Munging
received packets like this also limits when the signature can be
calulated.

Simplify the code by keeping the received ByteCount in little-endian
format. This allows us to eliminate a set of routines for accessing it
and we can now drop the *_le suffixes from the accessor functions since
that's now implied.

While we're at it, switch all of the places that read the ByteCount
directly to use the get_bcc inline which should also clean up some
unaligned accesses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:53 +00:00
Steve French be8e3b0044 consistently use smb_buf_length as be32 for cifs (try 3)
There is one big endian field in the cifs protocol, the RFC1001
       length, which cifs code (unlike in the smb2 code) had been handling as
       u32 until the last possible moment, when it was converted to be32 (its
       native form) before sending on the wire.   To remove the last sparse
       endian warning, and to make this consistent with the smb2
       implementation  (which always treats the fields in their
       native size and endianness), convert all uses of smb_buf_length to
       be32.

       This version incorporates Christoph's comment about
       using be32_add_cpu, and fixes a typo in the second
       version of the patch.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2011-05-19 14:10:51 +00:00