Commit Graph

9 Commits

Author SHA1 Message Date
Linus Torvalds ea584595fc This is the bulk of GPIO changes for the v3.18 development
cycle:
 
 - Increase the default ARCH_NR_GPIO from 256 to 512. This
   was done to avoid having a custom <asm/gpio.h> header for
   the x86 architecture - GPIO is custom and complicated
   enough as it is already! We want to move to a radix to
   store the descriptors going forward, and finally get rid
   of this fixed array size altogether.
 
 - Endgame patching of the gpio_remove() semantics initiated
   by Abdoulaye Berthe. It is not accepted by the system that
   the removal of a GPIO chip fails during e.g. reboot or
   shutdown, and therefore the return value has now painfully
   been refactored away. For special cases like GPIO expanders
   on a hot-pluggable bus like USB, we may later add some
   gpiochip_try_remove() call, but for the cases we have now,
   return values are moot.
 
 - Some incremental refactoring of the gpiolib core and ACPI
   GPIO library for more descriptor usage.
 
 - Refactor the chained IRQ handler set-up method to handle
   also threaded, nested interrupts and set up the parent IRQ
   correctly. Switch STMPE and TC3589x drivers to use this
   registration method.
 
 - Add a .irq_not_threaded flag to the struct gpio_chip, so
   that also GPIO expanders that block but are still not
   using threaded IRQ handlers.
 
 - New drivers for the ARM64 X-Gene SoC GPIO controller.
 
 - The syscon GPIO driver has been improved to handle the
   "DSP GPIO" found on the TI Keystone 2 SoC:s.
 
 - ADNP driver switched to use gpiolib irqchip helpers.
 
 - Refactor the DWAPB driver to support being instantiated
   from and MFD cell (platform device).
 
 - Incremental feature improvement in the Zynq, MCP23S08,
   DWAPB, OMAP, Xilinx and Crystalcove drivers.
 
 - Various minor fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNOr0AAoJEEEQszewGV1z9toP/2ISXRnsi3+jlqVmEGm/y6EA
 PPwJOiYnOhZR2/fTCHIF0PNbIi9pw7xKnzxttYCu4uCz7geHX+FfTwUZ2/KWMfqi
 ZJ9kEoOVVKzKjmL/m2a2tO4IRSBHqJ8dF3yvaNjS3AL7EDfG6F5STErQurdLEynK
 SeJZ2OwM/vRFCac6F7oDlqAUTu3xYGbVD8+zI0H0V/ReocosFlEwcbl2S8ctDWUd
 h98M+gY+A8rxkvVMnmQ/k7rUTme/glDQ3z5xVx+uHbS2/a5M1jSM/71cXE6YnSrR
 it0CK7CHomq2RzHsKf7oH7GD4kFkukMwFKeMoqz75JWz3352VZPTF53chCIqRSgO
 hrgGwZ7WF6pUUUhsn1ZdZsnBPA2Fou2uwslyLSAiE+OYEH2/NSVIOUcorjQcWqU/
 0Kix5yb8X1ZzRMhR+TVrTD5V0jguqp2buXq+0P2XlU6MoO2vy7iNf2eXvPg8sF8C
 anjTCKgmkzy7eyT2uzfDaNZAyfSBKb1TiKiR9zA0SRChJkCi1ErJEXDGeHiptvSA
 +D2k68Ils2LqsvdrnEd2XvVFMllh0iq7b+16o7D+Els0WRbnHpfYCaqfOuF5F4U0
 SmeyI0ruawNDc5e9EBKXstt0/R9AMOetyTcTu29U2ZVo90zGaT1ofT8+R1jJ0kGa
 bPARJZrgecgv1E9Qnnnd
 =8InA
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 "This is the bulk of GPIO changes for the v3.18 development cycle:

   - Increase the default ARCH_NR_GPIO from 256 to 512.  This was done
     to avoid having a custom <asm/gpio.h> header for the x86
     architecture - GPIO is custom and complicated enough as it is
     already! We want to move to a radix to store the descriptors going
     forward, and finally get rid of this fixed array size altogether.

   - Endgame patching of the gpio_remove() semantics initiated by
     Abdoulaye Berthe.  It is not accepted by the system that the
     removal of a GPIO chip fails during eg reboot or shutdown, and
     therefore the return value has now painfully been refactored away.
     For special cases like GPIO expanders on a hot-pluggable bus like
     USB, we may later add some gpiochip_try_remove() call, but for the
     cases we have now, return values are moot.

   - Some incremental refactoring of the gpiolib core and ACPI GPIO
     library for more descriptor usage.

   - Refactor the chained IRQ handler set-up method to handle also
     threaded, nested interrupts and set up the parent IRQ correctly.
     Switch STMPE and TC3589x drivers to use this registration method.

   - Add a .irq_not_threaded flag to the struct gpio_chip, so that also
     GPIO expanders that block but are still not using threaded IRQ
     handlers.

   - New drivers for the ARM64 X-Gene SoC GPIO controller.

   - The syscon GPIO driver has been improved to handle the "DSP GPIO"
     found on the TI Keystone 2 SoC:s.

   - ADNP driver switched to use gpiolib irqchip helpers.

   - Refactor the DWAPB driver to support being instantiated from and
     MFD cell (platform device).

   - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP,
     Xilinx and Crystalcove drivers.

   - Various minor fixes"

* tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits)
  gpio: pch: Build context save/restore only for PM
  pinctrl: abx500: get rid of unused variable
  gpio: ks8695: fix 'else should follow close brace '}''
  gpio: stmpe: add verbose debug code
  gpio: stmpe: fix up interrupt enable logic
  gpio: staticize xway_stp_init()
  gpio: handle also nested irqchips in the chained handler set-up
  gpio: set parent irq on chained handlers
  gpiolib: irqchip: use irq_find_mapping while removing irqchip
  gpio: crystalcove: support virtual GPIO
  pinctrl: bcm281xx: make Kconfig dependency more strict
  gpio: kona: enable only on BCM_MOBILE or for compile testing
  gpio, bcm-kona, LLVMLinux: Remove use of __initconst
  gpio: Fix ngpio in gpio-xilinx driver
  gpio: dwapb: fix pointer to integer cast
  gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard
  gpio: xgene: Remove unneeded forward declation for struct xgene_gpio
  gpio: xgene: Fix missing spin_lock_init()
  gpio: ks8695: fix switch case indentation
  gpiolib: add irq_not_threaded flag to gpio_chip
  ...
2014-10-09 14:58:15 -04:00
Linus Torvalds 2b425a3f11 This is the bulk of pin control changes for the v3.18
development series:
 
 - New drivers for the Freescale i.MX21, Qualcomm APQ8084
   pin controllers.
 
 - Incremental new features on the Rockchip, atlas 6,
   OMAP, AM437x, APQ8064, prima2, AT91, Tegra, i.MX, Berlin
   and Nomadik.
 
 - Push Freescale drivers down into their own subdirectory.
 
 - Assorted sprays of syntax and semantic fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUMkr3AAoJEEEQszewGV1z/xsP/1EFR6zyriyup3TuWw1kiqwH
 wGuEK3i0v99INcK46l9xD65aZLaK60Z6llYAmwa2wmFCDotOr46GSW2V9bqd0RHg
 6EZdDATo8Ge8j86L9oUMElbMJoKMQiVC6+YeiuhQRrFuq8TpXGoTMPeQlaEslR08
 MUjIVcxRbFeQCWOgkaqjjxwgX1FPU1S9aQNxDDDPuWSwTowV0nwBpdFviAgWlouY
 DDG4/WPWH7s/Ujv0MJ7MQR9Hkl6WYlcuhGWDUkcIj7f1lvxTTB37Em7daBUBwhQo
 PEYmf1AtwMEWF2y1i99ExFE/YSBQjjslYe29uECvaH63PVgfRMrWgJl199NOed8Q
 9GfEa+uwiV4Z4PxFZqcvsjUiNQg8SoijP4UTf9AJTuQZtebVia8OS9AFsN3XULHJ
 zXGKbCUd2kH+p/0/MJUePQEDoi9bPrsIhNG/s3KYmawQ6Ua4uytPgG0lF91dvP6m
 LvCnsGNDvGQUk1UUG3Lj4ZDCP42TAbjNyr27Ot/oUAygjHfjsXsZ6FFmlMCOeCRx
 tV+qjW9Ng69CSLPLKHCHVMsXKliJ2Vp2Mt8cr8yFyHaMDIneRx3IqUvrZ0dzfVLq
 /H3/7usvR/sEV23AI920mfPVYruIJESpBh6NKt66tPSSV2C6HP/qRTN/6tAwXqBL
 rzwv2t8qu5+ic2Ae5/wk
 =b4Tn
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.18 development
  series:

   - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin
     controllers.

   - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x,
     APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik.

   - Push Freescale drivers down into their own subdirectory.

   - Assorted sprays of syntax and semantic fixes"

* tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: specify bindings for pins and groups
  pinctrl: nomadik: improve GPIO debug prints
  pinctrl: abx500: refactor DT parser to take two paths
  pinctrl: abx500: use helpers for map allocation/free
  pinctrl: alter device tree bindings for functions
  pinctrl: nomadik: refactor DT parser to take two paths
  pinctrl: nomadik: use utils map free function
  pinctrl: nomadik: use util function to reserve maps
  pinctrl: qcom: use restart_notifier mechanism for ps_hold
  pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation
  pinctrl: berlin: fix the dt_free_map function
  pinctrl: at91: disable PD or PU before enabling PU or PD
  pinctrl: st: remove gpiochip in failure cases
  pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add
  pinctrl: at91: Fix failure path in at91_gpio_probe path
  pinctrl: lantiq: Release gpiochip resources in fail case
  pinctrl: imx: detect uninitialized pins
  pinctrl: tegra: Add MIPI pad control
  pinctrl: at91: Switch to using managed clk_get
  pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges
  ...
2014-10-07 20:56:28 -04:00
Linus Walleij 3a4b094d5d pinctrl: abx500: get rid of unused variable
commit 2fcea6cecb
"pinctrl: remove remaining users of gpiochip_remove() retval"
removed the use of the return value from gpiochip_remove()
but missed to delete the dangling "err" variable:

drivers/pinctrl/nomadik/pinctrl-abx500.c:
In function 'abx500_gpio_probe':
drivers/pinctrl/nomadik/pinctrl-abx500.c:1208:11:
warning: unused variable 'err' [-Wunused-variable]

Fix this by getting rid of the dangling variable.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-02 16:07:00 +02:00
Linus Walleij 259145feff pinctrl: abx500: refactor DT parser to take two paths
We refactor the DT parser to look for either a config or a
function and then look for further nodes and reserve maps,
not the two things mixed up like prior to this patch.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-30 11:23:28 +02:00
Linus Walleij b07f92a220 pinctrl: abx500: use helpers for map allocation/free
This switches the abx500 driver to use the pin control helper
utils for allocating and free:ing maps.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-30 11:23:19 +02:00
Linus Walleij 2fcea6cecb pinctrl: remove remaining users of gpiochip_remove() retval
Some drivers accidentally still use the return value from
gpiochip_remove(). Get rid of them so we can simplify this function
and get rid of the return value.

Cc: Abdoulaye Berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23 17:51:12 +02:00
Linus Walleij 03e9f0cac5 pinctrl: clean up after enable refactoring
commit 2243a87d90
"pinctrl: avoid duplicated calling enable_pinmux_setting for a pin"
removed the .disable callback from the struct pinmux_ops,
making the .enable() callback the only remaining callback.

However .enable() is a bad name as it seems to imply that a
muxing can also be disabled. Rename the callback to .set_mux()
and also take this opportunity to clean out any remaining
mentions of .disable() from the documentation.

Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Acked-by: Fan Wu <fwu@marvell.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04 10:05:07 +02:00
Patrice CHOTARD 1d54f0fd58 pinctrl: abx500: remove useless check
pctldev can't be NULL at this stage so remove the check

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17 09:15:44 -05:00
Linus Walleij 3a19805920 pinctrl: nomadik: move all Nomadik drivers to subdir
We have a bunch of Nomadik family pin control drivers, so let's
move them into their own subdirectory.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 15:01:35 +02:00