Commit Graph

1568 Commits

Author SHA1 Message Date
Thomas Gleixner 3ef9dff4ae treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 137
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify it
  under the terms of the gnu general public license as published by the
  free software foundation either version 2 of the license or at your
  option any later version this program is distributed in the hope that it
  will be useful but without any warranty without even the implied warranty
  of merchantability or fitness for a particular purpose see the gnu
  general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190524100843.971812365@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:25:16 -07:00
Thomas Gleixner 112a732834 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 68
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license vs published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  675 mvss ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 2 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071859.384981802@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:36:46 +02:00
Thomas Gleixner 74ba9207e1 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24 17:36:45 +02:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Masahiro Yamada 14340de506 media: prefix header search paths with $(srctree)/
Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf5b
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2019-05-18 11:49:56 +09:00
Mickael Guene 642bb5e88f media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver
This V4L2 subdev driver enables STMicroelectronics MIPID02 device.

Signed-off-by: Mickael Guene <mickael.guene@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 11:39:20 -04:00
Akinobu Mita 384538bda1 media: ov2659: fix unbalanced mutex_lock/unlock
Avoid returning with mutex locked.

Fixes: fa8cb6444c ("[media] ov2659: Don't depend on subdev API")

Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 11:35:11 -04:00
Akinobu Mita bccb89cf9c media: ov2659: make S_FMT succeed even if requested format doesn't match
This driver returns an error if unsupported media bus pixel code is
requested by VIDIOC_SUBDEV_S_FMT.

But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst,

Drivers must not return an error solely because the requested format
doesn't match the device capabilities. They must instead modify the
format to match what the hardware can provide.

So select default format code and return success in that case.

This is detected by v4l2-compliance.

Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 11:34:50 -04:00
Janusz Krzysztofik c62b96050b media: ov6650: Register with asynchronous subdevice framework
Register V4L2 subdevice implemented by the driver to the V4L2
asynchronous subdevice framework.

[Sakari Ailus: Remove extra call to v4l2_i2c_subdev_set_name]

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 11:33:46 -04:00
Janusz Krzysztofik ccdd85d518 media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper
In preparation for adding asynchronous subdevice support to the driver,
don't acquire v4l2_clk from the driver .probe() callback as that may
fail if the clock is provided by a bridge driver which may be not yet
initialized.  Move the v4l2_clk_get() to ov6650_video_probe() helper
which is going to be converted to v4l2_subdev_internal_ops.registered()
callback, executed only when the bridge driver is ready.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 11:33:03 -04:00
Janusz Krzysztofik 933c132084 media: ov6650: Fix sensor possibly not detected on probe
After removal of clock_start() from before soc_camera_init_i2c() in
soc_camera_probe() by commit 9aea470b39 ("[media] soc-camera: switch
I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650
driver could no longer probe the sensor successfully because its clock
was no longer turned on in advance.  The issue was initially worked
around by adding that missing clock_start() equivalent to OMAP1 camera
interface driver - the only user of this sensor - but a propoer fix
should be rather implemented in the sensor driver code itself.

Fix the issue by inserting a delay between the clock is turned on and
the sensor I2C registers are read for the first time.

Tested on Amstrad Delta with now out of tree but still locally
maintained omap1_camera host driver.

Fixes: 9aea470b39 ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk")

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22 11:32:36 -04:00
Akinobu Mita c4b50cabd6 media: ov7740: enable to get exposure control in autoexposure mode
The exposure control is clustered with the autoexposure control and
flagged as volatile, but the g_volatile_ctrl() doesn't handle
V4L2_CID_EXPOSURE_AUTO.  So, the value of the exposure control can't be
read in autoexposure mode.

This enables to get the exposure control in autoexposure mode by making
ov7740_get_volatile_ctrl() deal with V4L2_CID_EXPOSURE_AUTO.

This also sets the exposure control as volatile by specifying the
argument to v4l2_ctrl_auto_cluster() instead of manually flagging it.

Cc: Wenyou Yang <wenyou.yang@microchip.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-29 10:44:47 -04:00
Koen Vandeputte 5f2efda71c media: i2c: tda1997x: select V4L2_FWNODE
Building tda1997x fails now unless V4L2_FWNODE is selected:

drivers/media/i2c/tda1997x.o: in function `tda1997x_parse_dt'
undefined reference to `v4l2_fwnode_endpoint_parse'

While at it, also sort the selections alphabetically

Fixes: 9ac0038db9 ("media: i2c: Add TDA1997x HDMI receiver driver")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Cc: stable@vger.kernel.org # v4.17+
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-29 07:38:50 -04:00
Mauro Carvalho Chehab 153d11cc53 media: imx214: don't de-reference a NULL pointer
As warned by smatch:
	drivers/media/i2c/imx214.c:591 imx214_set_format() warn: variable dereferenced before check 'format' (see line 589)

It turns that the code at imx214_set_format() has support for being
called with the format being NULL. I've no idea why, as it is only
called internally with the pointer set, and via subdev API (with
should also set it).

Also, the entire logic there depends on having format != NULL, so
just remove the bogus broken support for a null format.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ricardo Ribalda Delgado <ricardo@ribalda.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-25 14:40:56 -04:00
Mauro Carvalho Chehab b60a5b8dcf media: Kconfig files: use the right help coding style
Checkpatch wants to use 'help' instead of '---help---':

	WARNING: prefer 'help' over '---help---' for new help texts

Let's change it globally at the media subsystem, as otherwise people
would keep using the old way.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:47:51 -04:00
Sakari Ailus 0d0d87fbf4 media: v4l: i2c: Regroup lens drivers under their own section
The lens drivers had ended up under the video decoder section; add a new
one just for them, between the camera sensors and flash drivers.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:36:51 -04:00
Akinobu Mita 12f6153d45 media: ov7670: don't access registers when the device is powered off
Since commit 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core"),
the device is actually powered off while the video stream is stopped.

So now set_format and s_frame_interval could be called while the device
is powered off, but these callbacks try to change the register settings
at this time.

The frame format and framerate will be restored right after power-up, so
we can just postpone applying these changes at these callbacks if the
device is not powered up.

Fixes: 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core")

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:34:09 -04:00
Akinobu Mita 32ab688b28 media: ov7670: restore default settings after power-up
Since commit 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core"),
the device is actually powered off while the video stream is stopped.

The frame format and framerate are restored right after power-up, but
restoring the default register settings is forgotten.

Fixes: 3d6a8fe256 ("media: ov7670: hook s_power onto v4l2 core")

Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-20 06:33:29 -04:00
Arnd Bergmann 6685d51515 media: i2c: adv748x: select V4L2_FWNODE
Building adv748x fails now unless V4L2_FWNODE is selected:

drivers/media/i2c/adv748x/adv748x-core.o: In function `adv748x_probe':
adv748x-core.c:(.text+0x1b2c): undefined reference to `v4l2_fwnode_endpoint_parse'

Fixes: 6a18865da8 ("media: i2c: adv748x: store number of CSI-2 lanes described in device tree")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19 16:35:09 -04:00
Mauro Carvalho Chehab f8a7647d31 media: i2c: fix several typos
Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01 09:29:58 -05:00
Akinobu Mita 12aceee1f4 media: ov7740: fix runtime pm initialization
The runtime PM of this device is enabled after v4l2_ctrl_handler_setup(),
and this makes this device's runtime PM usage count a negative value.

The ov7740_set_ctrl() tries to do something only if the device's runtime
PM usage counter is nonzero.

ov7740_set_ctrl()
{
	if (!pm_runtime_get_if_in_use(&client->dev))
		return 0;

	<do something>;

	pm_runtime_put(&client->dev);

	return ret;
}

However, the ov7740_set_ctrl() is called by v4l2_ctrl_handler_setup()
while the runtime PM of this device is not yet enabled.  In this case,
the pm_runtime_get_if_in_use() returns -EINVAL (!= 0).

Therefore we can't bail out of this function and the usage count is
decreased by pm_runtime_put() without increment.

This fixes this problem by enabling the runtime PM of this device before
v4l2_ctrl_handler_setup() so that the ov7740_set_ctrl() is always called
when the runtime PM is enabled.

Cc: Wenyou Yang <wenyou.yang@microchip.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 15:38:23 -05:00
Tim Harvey 0806bc0afb media: tda1997x: fix get_edid
set_edid never wrote the new EDID to state->edid.edid, it was only
written to the hardware. Since get_edid returned state->edid.edid,
it was never returning the right EDID.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: added missing commit log]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 15:27:35 -05:00
Cody P Schafer 46c039d06b media: cx25840: mark pad sig_types to fix cx231xx init
Without this, we get failures like this when the kernel attempts to
initialize a cx231xx device:

	[16046.153653] cx231xx 3-1.2:1.1: New device Hauppauge Hauppauge Device @ 480 Mbps (2040:c200) with 6 interfaces
	[16046.153900] cx231xx 3-1.2:1.1: can't change interface 3 alt no. to 3: Max. Pkt size = 0
	[16046.153907] cx231xx 3-1.2:1.1: Identified as Hauppauge USB Live 2 (card=9)
	[16046.154350] i2c i2c-11: Added multiplexed i2c bus 13
	[16046.154379] i2c i2c-11: Added multiplexed i2c bus 14
	[16046.267194] cx25840 10-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
	[16048.424551] cx25840 10-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
	[16048.463224] cx231xx 3-1.2:1.1: v4l2 driver version 0.0.3
	[16048.567878] cx231xx 3-1.2:1.1: Registered video device video2 [v4l2]
	[16048.568001] cx231xx 3-1.2:1.1: Registered VBI device vbi0
	[16048.568419] cx231xx 3-1.2:1.1: audio EndPoint Addr 0x83, Alternate settings: 3
	[16048.568425] cx231xx 3-1.2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
	[16048.568431] cx231xx 3-1.2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
	[16048.568436] cx231xx 3-1.2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
	[16048.568448] usb 3-1.2: couldn't get decoder output pad for V4L I/O
	[16048.568453] cx231xx 3-1.2:1.1: V4L2 device vbi0 deregistered
	[16048.568579] cx231xx 3-1.2:1.1: V4L2 device video2 deregistered
	[16048.569001] cx231xx: probe of 3-1.2:1.1 failed with error -22

Likely a regession since Commit 9d6d20e652
("media: v4l2-mc: switch it to use the new approach to setup pipelines")
(v4.19-rc1-100-g9d6d20e652c0), which introduced the use of
PAD_SIGNAL_DV within v4l2_mc_create_media_graph().

This also modifies cx25840 to remove the VBI pad, matching the action
taken in Commit 092a37875a ("media: v4l2: remove VBI output pad").

Fixes: 9d6d20e652 ("media: v4l2-mc: switch it to use the new approach to setup pipelines")

Cc: stable@vger.kernel.org
Signed-off-by: Cody P Schafer <dev@codyps.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:33:20 -05:00
Sakari Ailus 280de94a65 media: soc_camera: Move to the staging tree
The SoC camera framework has no functional drivers left, something that
has not changed for years. Move the leftovers to the staging tree.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:09:19 -05:00
Sakari Ailus 3c32db82df media: soc_camera: Remove the rj45n1 SoC camera sensor driver
There is a V4L2 sub-device sensor driver for the rj45n1.
As there is already another driver, remove the SoC camera one.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:08:18 -05:00
Sakari Ailus f47c34be55 media: soc_camera: Remove the mt9m001 SoC camera sensor driver
There is a V4L2 sub-device sensor driver for the mt9m001.
There is already a non-soc_camera driver. So, remove the SoC camera
one.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 12:07:18 -05:00
Loic Poulain 1d4c41f3d8 media: i2c: ov5640: Fix post-reset delay
According to the ov5640 specification (2.7 power up sequence), host can
access the sensor's registers 20ms after reset. Trying to access them
before leads to undefined behavior and result in sporadic initialization
errors.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:38:58 -05:00
Jagan Teki 6530a5eb99 media: ov5640: Fix set 15fps regression
The ov5640_try_frame_interval operation updates the FPS as per user
input based on default ov5640_frame_rate, OV5640_30_FPS which is failed
to update when user trigger 15fps.

So, initialize the default ov5640_frame_rate to OV5640_15_FPS so-that
it can satisfy to update all fps.

Fixes: 5a3ad937bc ("media: ov5640: Make the return rate type more explicit")

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:38:28 -05:00
Chen-Yu Tsai 2b5c18f964 media: ov5640: Consolidate JPEG compression mode setting
The register value lists for all the supported resolution settings all
include a register address/value pair for setting the JPEG compression
mode. With the exception of 1080p (which sets mode 2), all resolutions
use mode 3.

The only difference between mode 2 and mode 3 is that mode 2 may have
padding data on the last line, while mode 3 does not add padding data.

As these register values were from dumps of running systems, and the
difference between the modes is quite small, using mode 3 for all
configurations should be OK.

[Sakari Ailus: Align OV5640_REG_JPG_MODE_SELECT register naming.]

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:31:38 -05:00
Chen-Yu Tsai 7cb013b104 media: ov5640: Set JPEG output timings when outputting JPEG data
When compression is turned on, the on-bus data is framed according to
the compression mode, and the height and width set in VFIFO_VSIZE and
VFIFO_HSIZE. If these are not updated correctly, the sensor will send
data framed in a manner unexpected by the capture interface, such as
having more bytes per line than expected, and having the extra data
dropped. This ultimately results in corrupted data.

Set the two values when the media bus is configured for JPEG data,
meaning the sensor would be in JPEG mode.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:29:56 -05:00
Chen-Yu Tsai bddc5cdfc8 media: ov5640: Add three more test patterns
The OV5640 driver currently supports a static color bar pattern with a
small vertical gamma gradient. The hardware also supports a color square
pattern, as well as having a rolling bar for dynamic sequences.

Add three more test patterns:

  - color bars with a rolling bar (but without the gamma gradient)
  - static color squares
  - color squares with a rolling bar

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:29:30 -05:00
Chen-Yu Tsai 2aff1fc365 media: ov5640: Disable transparent feature for test pattern
The transparent feature for test patterns blends the test pattern with
an actual captured image. This makes the result non-static, subject to
changes in the sensor's field of view.

Test patterns should be predictable and deterministic, even if they are
dynamic patterns. Disable the transparent feature of the test pattern.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:28:49 -05:00
Chen-Yu Tsai a0c29afb50 media: ov5640: Add register definition for test pattern register
The OV5640 can generate many types of test patterns, some with
additional modifiers, such as a rolling bar, or gamma gradients.

Add the bit definitions for all bits in the test pattern register,
and use them to compose the values to be written to the register.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:28:20 -05:00
Chen-Yu Tsai 9f6d7bacc7 media: ov5640: Move test_pattern_menu before ov5640_set_ctrl_test_pattern
The OV5640 has many options for generating test patterns. Unfortunately
there is only one V4L2 control for it. Thus the driver would need to
list some or all combinations.

Move the test_pattern_menu list before the ov5640_set_ctrl_test_pattern
function that programs the hardware. This would allow us to add a
matching list of values to program into the hardware, while keeping the
two lists together for ease of maintenance.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:27:18 -05:00
Kieran Bingham 16597c2744 media: i2c: adv748x: Remove PAGE_WAIT
The ADV748X_PAGE_WAIT is a fake page to insert arbitrary delays in the
register tables.

Its only usage was removed, so we can remove the handling and simplify
the code.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:25:30 -05:00
Kieran Bingham ac105ab213 media: i2c: adv748x: Convert SW reset routine to function
The ADV748x is currently reset by writting a small table of registers to
the device.

The table lacks documentation and contains magic values to perform the
actions, including using a fake register address to introduce a delay
loop.

Remove the table, and convert to code, documenting the purpose of the
specific writes along the way.

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:24:49 -05:00
Jacopo Mondi 9423ca350d media: adv748x: Implement TX link_setup callback
When the adv748x driver is informed about a link being created from HDMI or
AFE to a CSI-2 TX output, the 'link_setup()' callback is invoked. Make
sure to implement proper routing management at link setup time, to route
the selected video stream to the desired TX output.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:23:44 -05:00
Jacopo Mondi a33df6ac31 media: adv748x: Store the TX sink in HDMI/AFE
Both the AFE and HDMI s_stream routines (adv748x_afe_s_stream() and
adv748x_hdmi_s_stream()) have to enable the CSI-2 TX they are streaming video
data to.

With the introduction of dynamic routing between HDMI and AFE entities to
TXA, the video stream sink needs to be set at run time, and not statically
selected as the s_stream functions are currently doing.

To fix this, store a reference to the active CSI-2 TX sink for both HDMI and
AFE sources, and operate on it when starting/stopping the stream.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:03:52 -05:00
Jacopo Mondi 3361b9c4ed media: adv748x: Store the source subdevice in TX
The power_up_tx() procedure needs to set a few registers conditionally to
the selected video source, but it currently checks for the provided tx to
be either TXA or TXB.

With the introduction of dynamic routing between HDMI and AFE entities to
TXA, checking which TX the function is operating on is not meaningful anymore.

To fix this, store the subdevice of the source providing video data to the
CSI-2 TX in the 'struct adv748x_csi2' representing the TX and check on it.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:03:21 -05:00
Jacopo Mondi 21325e19ca media: adv748x: csi2: Link AFE with TXA and TXB
The ADV748x chip supports routing AFE output to either TXA or TXB.
In order to support run-time configuration of video stream path, create an
additional (not enabled) "AFE:8->TXA:0" link, and remove the IMMUTABLE flag
from existing ones.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:02:47 -05:00
Jacopo Mondi 29166e0f8f media: adv748x: Rename reset procedures
Rename the chip reset procedure as they configure the CP (HDMI) and SD
(AFE) cores.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 11:01:31 -05:00
Jacopo Mondi bc2dea9e51 media: adv748x: Add is_txb()
Add small is_txb() macro to the existing is_txa() and use it where
appropriate.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-02-18 10:59:54 -05:00
Akinobu Mita adbd2969af media: ov2640: fix initial try format
Set initial try format with default configuration instead of current one.

Fixes: 8d3b307a15 ("media: ov2640: make VIDIOC_SUBDEV_G_FMT ioctl work with V4L2_SUBDEV_FORMAT_TRY")

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 11:02:04 -02:00
Dan Carpenter 61c1baa634 media: s5k4ecgx: delete a bogus error message
This function prints an error message on success.  I don't have the
hardware, I just noticed this while reading the code.

Fixes: 8b99312b72 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 11:01:42 -02:00
Akinobu Mita 2985630813 media: mt9m111: set initial frame size other than 0x0
This driver sets initial frame width and height to 0x0, which is invalid.
So set it to selection rectangle bounds instead.

This is detected by v4l2-compliance detected.

Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 11:01:12 -02:00
Akinobu Mita 2e1566abe5 media: mt9m111: set all mbus format field when G_FMT and S_FMT ioctls
This driver doesn't set all members of mbus format field when the
VIDIOC_SUBDEV_{S,G}_FMT ioctls are called.

This is detected by v4l2-compliance.

Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 11:00:39 -02:00
Akinobu Mita 49410d3abf media: mt9m111: make SUBDEV_G_FMT ioctl work with SUBDEV_FORMAT_TRY
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize
V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE
is specified.

Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 10:59:51 -02:00
Akinobu Mita 772f63c00c media: mt9m001: set all mbus format field when G_FMT and S_FMT ioctls
This driver doesn't set all members of mbus format field when the
VIDIOC_SUBDEV_{S,G}_FMT ioctls are called.

This is detected by v4l2-compliance.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 10:59:51 -02:00
Akinobu Mita 71f247daf0 media: mt9m001: make SUBDEV_G_FMT ioctl work with SUBDEV_FORMAT_TRY
The VIDIOC_SUBDEV_G_FMT ioctl for this driver doesn't recognize
V4L2_SUBDEV_FORMAT_TRY and always works as if V4L2_SUBDEV_FORMAT_ACTIVE
is specified.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 10:59:41 -02:00
Akinobu Mita dd15f0702f media: mt9m001: support log_status ioctl and event interface
This adds log_status ioctl and event interface for mt9m001's v4l2 controls.

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-25 10:56:00 -02:00