Commit Graph

104 Commits

Author SHA1 Message Date
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Jiri Olsa d0e35234f6 perf hists: Add extra integrity checks to fmt_free()
Make sure the struct perf_hpp_fmt is properly unhooked before we free
it.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-13 16:43:42 -03:00
Jiri Olsa 70b01dfd76 perf hists: Fix crash in perf_hpp__reset_output_field()
Du Changbin reported crash [1] when calling perf_hpp__reset_output_field()
after unregistering field via perf_hpp__column_unregister().

This ends up in calling following list_del* sequence on
the same format:

  perf_hpp__column_unregister:
    list_del(&format->list);
  perf_hpp__reset_output_field:
    list_del_init(&fmt->list);

where the later list_del_init might touch already freed formats.

Fixing this by replacing list_del() with list_del_init() in
perf_hpp__column_unregister().

[1] http://marc.info/?l=linux-kernel&m=149059595826019&w=2

Reported-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20171013083736.15037-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-13 16:43:33 -03:00
Namhyung Kim 7111ffff60 perf tools: Put caller above callee in --children mode
The __hpp__sort_acc() sorts entries using callchain depth in order to
put callers above in children mode.  But it assumed the callchain order
was callee-first.  Now default (for children) is caller-first so the
order of entries is reverted.

For example, consider following case:

  $ perf report --no-children
  ..l
  # Overhead  Command  Shared Object        Symbol
  # ........  .......  ...................  ..........................
  #
      99.44%  a.out    a.out                [.] main
              |
              ---main
                 __libc_start_main
                 _start

Then children mode should show 'start' above '__libc_start_main' since
it's the caller (parent) of the __libc_start_main.  But it's reversed:

  # Children      Self  Command  Shared Object    Symbol
  # ........  ........  .......  ...............  .....................
  #
      99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
      99.61%     0.00%  a.out    a.out            [.] _start
      99.54%    99.44%  a.out    a.out            [.] main

This patch fixes it.

  # Children      Self  Command  Shared Object    Symbol
  # ........  ........  .......  ...............  .....................
  #
      99.61%     0.00%  a.out    a.out            [.] _start
      99.61%     0.00%  a.out    libc-2.25.so     [.] __libc_start_main
      99.54%    99.44%  a.out    a.out            [.] main

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524062129.32529-8-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-24 08:41:49 +02:00
Arnaldo Carvalho de Melo fd20e8111c perf tools: Including missing inttypes.h header
Needed to use the PRI[xu](32,64) formatting macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19 13:01:46 -03:00
Namhyung Kim bb963e1650 perf utils: Check verbose flag properly
It now can have negative value to suppress the message entirely.  So it
needs to check it being positive.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-20 11:35:54 -03:00
Namhyung Kim a1c9f97f0b perf diff: Fix -o/--order option behavior (again)
Commit 21e6d84286 ("perf diff: Use perf_hpp__register_sort_field
interface") changed list_add() to perf_hpp__register_sort_field().

This resulted in a behavior change since the field was added to the tail
instead of the head.  So the -o option is mostly ignored due to its
order in the list.

This patch fixes it by adding perf_hpp__prepend_sort_field().

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 21e6d84286 ("perf diff: Use perf_hpp__register_sort_field interface")
Link: http://lkml.kernel.org/r/20170118051457.30946-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02 11:39:09 -03:00
Namhyung Kim 8381cdd0e3 perf diff: Fix segfault on 'perf diff -o N' option
The -o/--order option is to select column number to sort a diff result.

It does the job by adding a hpp field at the beginning of the sort list.
But it should not be added to the output field list as it has no
callbacks required by a output field.

During the setup_sorting(), the perf_hpp__setup_output_field() appends
the given sort keys to the output field if it's not there already.

Originally it was checked by fmt->list being non-empty.  But commit
3f931f2c42 ("perf hists: Make hpp setup function generic") changed it
to check the ->equal callback.

Anyways, we don't need to add the pseudo hpp field to the output field
list since it won't be used for output.  So just skip fields if they
have no ->color or ->entry callbacks.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 3f931f2c42 ("perf hists: Make hpp setup function generic")
Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-02 11:39:04 -03:00
Jiri Olsa 98ba160929 perf tools: Make several display functions global
Will be used from external places in the upcoming c2c patch series.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474558645-19956-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-22 13:08:58 -03:00
Namhyung Kim e3b60bc93d perf hists: Factor out hists__reset_column_width()
The stdio and tui has same code to reset hpp format column width.
Factor it out as a new function.

Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160920053025.13989-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-20 16:13:37 -03:00
Jiri Olsa 29659ab4e7 perf hists: Add support for header span
Add span argument for header callback function.

The handling of this argument is completely in the hands of the
callback. The only thing the caller ensures is it's zeroed on the
beginning.

Omitting span skipping in hierarchy headers and gtk code.

The c2c code use this to span header lines based on the entries span
configuration.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa 74bb43f29e perf hists: Add line argument into perf_hpp_fmt's header callback
Adding line argument into perf_hpp_fmt's header callback to be able to
request specific header line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Jiri Olsa f8e6710de8 perf hists: Introduce nr_header_lines into struct perf_hpp_list
Currently we support just single line headers, this is first step to
allow more.

Store the number of header lines in perf_hpp_list, which encompasses all
the display/sort entries and is thus suitable to hold this value.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470583710-1649-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-23 15:37:33 -03:00
Arnaldo Carvalho de Melo e5cadb93d0 perf evlist: Rename for_each() macros to for_each_entry()
To match the semantics for list.h in the kernel, that are used to
implement those macros.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 11:26:15 -03:00
Jiri Olsa da1b0407c8 perf hists: Replace perf_evsel arg perf_hpp_fmt's width callback
Replacing perf_evsel arg perf_hpp_fmt's width callback with hists
object.

This will be helpful in future for non evsel related hist browsers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:50:04 -03:00
Jiri Olsa 0537217360 perf hists: Replace perf_evsel arg perf_hpp_fmt's header callback
Replacing perf_evsel arg perf_hpp_fmt's header callback with hists
object.

None of the actual callbacks actually use evsel object, also this will
be helpful in future for non evsel related hist browsers.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 10:49:18 -03:00
Jiri Olsa 2e0453af4e perf hists: Move sort__has_sym into struct perf_hpp_list
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.

Moving sort__has_sym into struct perf_hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-05 21:03:59 -03:00
Namhyung Kim 86e3ee5224 perf tools: Remove nr_sort_keys field
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore.  Let's get rid of it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10 16:46:08 -03:00
Namhyung Kim 2dbbe9f26c perf hists: Fix indent for multiple hierarchy sort key
When multiple sort keys are used in a single hierarchy, it should indent
using number of hierarchy levels instead of number of sort keys.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-5-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:20 +01:00
Namhyung Kim 1b2dbbf41a perf hists: Use own hpp_list for hierarchy mode
Now each hists has its own hpp lists in hierarchy.  So instead of having
a pointer to a single perf_hpp_fmt in a hist entry, make it point the
hpp_list for its level.  This will be used to support multiple sort keys
in a single hierarchy level.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-3-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:19 +01:00
Namhyung Kim c3bc0c4368 perf hists: Introduce perf_hpp__setup_hists_formats()
The perf_hpp__setup_hists_formats() is to build hists-specific output
formats (and sort keys).  Currently it's only used in order to build the
output format in a hierarchy with same sort keys, but it could be used
with different sort keys in non-hierarchy mode later.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457361308-514-2-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-08 10:11:19 +01:00
Namhyung Kim a7b5895b91 perf hists: Add more helper functions for the hierarchy mode
The hists__overhead_width() is to calculate width occupied by the
overhead (and others) columns before the sort columns.

The hist_entry__has_hiearchy_children() is to check whether an entry has
lower entries (children) in the hierarchy to be shown in the output.
This means the children should not be filtered out and above the percent
limit.

These two functions will be used to show information when all children
of an entry is omitted by the percent limit (or filter).

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456488800-28124-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-26 11:20:35 -03:00
Namhyung Kim 1f2d72cf32 perf hists: Count number of sort keys
It'll be used for hierarchy output mode to indent entries properly.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1456326830-30456-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-24 20:21:11 -03:00
Namhyung Kim dd42baf1f6 perf tools: Fix assertion failure on dynamic entry
The dynamic entry is created for each field in a tracepoint event.
Since they have no fixed hpp format index, it should skip when
perf_hpp__reset_width() is called.

This caused following assertion failure..

  $ perf record -e sched:sched_switch -a sleep 1

  $ perf report -s comm,next_pid --stdio
  perf: ui/hist.c:651: perf_hpp__reset_width:
    Assertion `!(fmt->idx >= PERF_HPP__MAX_INDEX)' failed.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1456064558-13086-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-22 12:07:14 -03:00
Jiri Olsa f0786af536 perf hists: Introduce hists__for_each_format macro
With the hist object having the perf_hpp_list we can now iterate output
format entries based in the hists object. Adding hists__for_each_format
macro to do that.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-26-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:19 -03:00
Jiri Olsa 43e0a68f13 perf hists: Add struct perf_hpp_list argument to helper functions
Adding struct perf_hpp_list argument to following helper functions:

  void perf_hpp__setup_output_field(struct perf_hpp_list *list);
  void perf_hpp__reset_output_field(struct perf_hpp_list *list);
  void perf_hpp__append_sort_keys(struct perf_hpp_list *list);

so they could be used on hists's hpp_list.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-24-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:17 -03:00
Jiri Olsa 1a8ebd243a perf hists: Introduce perf_hpp_list__for_each_sort_list_safe macro
Introducing perf_hpp_list__for_each_sort_list_safe macro
to iterate perf_hpp_list object's sort entries safely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-23-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:16 -03:00
Jiri Olsa d29a497090 perf hists: Introduce perf_hpp_list__for_each_sort_list macro
Introducing perf_hpp_list__for_each_sort_list macro to iterate
perf_hpp_list object's sort entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-22-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:15 -03:00
Jiri Olsa 7a1799e0a2 perf hists: Introduce perf_hpp_list__for_each_format_safe macro
Introducing perf_hpp_list__for_each_format_safe macro to iterate
perf_hpp_list object's output entries safely.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-21-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:14 -03:00
Jiri Olsa cf094045d7 perf hists: Introduce perf_hpp_list__for_each_format macro
Introducing perf_hpp_list__for_each_format macro to iterate
perf_hpp_list object's output entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-20-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:14 -03:00
Jiri Olsa ebdd98e030 perf hists: Add perf_hpp_list register helpers
Adding 2 perf_hpp_list register helpers:

  perf_hpp_list__column_register()
  perf_hpp_list__register_sort_field()

to be called within existing helpers:

  perf_hpp__column_register()
  perf_hpp__register_sort_field()

to register format entries within global perf_hpp_list object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-17-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:12 -03:00
Jiri Olsa 7c31e10266 perf hists: Introduce struct perf_hpp_list
Gather output and sort lists under struct perf_hpp_list, so we could
have multiple instancies of sort/output format entries.

Replacing current perf_hpp__list and perf_hpp__sort_list lists with
single perf_hpp_list instance.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-15-git-send-email-jolsa@kernel.org
[ Renamed fields to .{fields,sorts} as suggested by Namhyung and acked by Jiri ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:10 -03:00
Jiri Olsa 564132f311 perf hists: Properly release format fields
With multiple list holding format entries, we need the support properly
releasing format output/sort fields.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:08 -03:00
Jiri Olsa 12cb4397fb perf hists: Remove perf_hpp__column_(disable|enable)
Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:08 -03:00
Jiri Olsa 1945c3e734 perf hists: Allocate output sort field
Currently we use static output fields, because we have single global
list of all sort/output fields.

We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:07 -03:00
Jiri Olsa 3f931f2c42 perf hists: Make hpp setup function generic
Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:

  perf_hpp__setup_output_field
  perf_hpp__append_sort_keys

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:02 -03:00
Jiri Olsa c0020efa07 perf hists: Add 'hpp__equal' callback function
Adding 'hpp__equal' callback function to compare hpp output format
entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 12:24:01 -03:00
Jiri Olsa 97358084b9 perf hists: Add 'equal' method to perf_hpp_fmt struct
To easily compare format entries and make it available for all kinds of
format entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 11:13:12 -03:00
Jiri Olsa 2e8b79e706 perf hists: Use struct perf_hpp_fmt::idx in perf_hpp__reset_width
We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 11:13:12 -03:00
Jiri Olsa b21a763edd perf hists: Add _idx fields into struct perf_hpp_fmt
Currently there's no way of comparing hpp format entries, which is
needed in following patches.

Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-03 11:13:11 -03:00
Jiri Olsa b97511c5bc perf tools: Add overhead/overhead_children keys defaults via string
We currently set 'overhead' and 'overhead_children' as default sort keys
within perf_hpp__init function by directly adding into the sort list.

This patch adds 'overhead' and 'overhead_children' in text form into
sort_keys and let them be added by standard sort dimension interface.

We need to eliminate dirrect sort_list additions to be able to add
support for hists specific sort keys.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452158050-28061-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08 12:58:58 -03:00
Namhyung Kim 361459f163 perf tools: Skip dynamic fields not defined for current event
When there are multiple events, each dynamic sort key is defined just
for one event.  In this case other events will always show "N/A" for
those fields.  But they are meaningless and consume precious screen
width.

Let's skip those undefined dynamic fields.

  $ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1

  $ perf report -s 'comm,kmalloc.*' --stdio
  # To display the perf.data header info, please use --header/--header-only options.
  #
  #
  # Total Lost Samples: 0
  #
  # Samples: 20K of event 'kmem:kmalloc'
  # Event count (approx.): 20533
  #
  # Overhead  Command           call_site                 ptr  bytes_req  bytes_alloc            gfp_flags
  # ........  .......  ..................  ..................  .........  ...........  ...................
  #
      99.89%  perf       ffffffffa01d4396  0xffff8803ffb79720         96           96    GFP_NOFS|GFP_ZERO
       0.06%  sleep      ffffffff8114e1cd  0xffff8803d228a000       4096         4096           GFP_KERNEL
       0.03%  perf       ffffffff811d6ae6  0xffff8803f7678f00        240          256  GFP_KERNEL|GFP_ZERO
       0.00%  perf       ffffffff812263c1  0xffff880406172380        128          128           GFP_KERNEL
       0.00%  perf       ffffffff812264b9  0xffff8803ffac1600        504          512           GFP_KERNEL
       0.00%  perf       ffffffff81226634  0xffff880401dc5280         28           32           GFP_KERNEL
       0.00%  sleep      ffffffff81226da9  0xffff8803ffac3a00        392          512           GFP_KERNEL

  # Samples: 20K of event 'kmem:kfree'
  # Event count (approx.): 20597
  #
  # Overhead  Command
  # ........  ..............
  #
      99.63%  perf
       0.14%  sleep
       0.11%  irq/36-iwlwifi
       0.11%  kworker/u16:0
       0.01%  Xorg
       0.00%  firefox

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-06 20:11:12 -03:00
Jiri Olsa 1178bfd41f perf tools: Use hpp_dimension__add_output to register hpp columns
The perf_hpp__init currently does not respect sorting dimensions and the
setup_sorting function could endup queueing same format twice. That
screwed up the perf_hpp__list and got stuck in loop within
perf_hpp__setup_output_field function.

  $ perf report -F +overhead

  0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
  1506    {

     #0  0x00000000004c1355 in perf_hpp__is_sort_entry (format=format@entry=0x880440 <perf_hpp.format>) at util/sort.c:1506
     #1  0x00000000004c139d in perf_hpp__same_sort_entry (a=a@entry=0x880440 <perf_hpp.format>, b=b@entry=0x2bb2fe0) at util/sort.c:1380
     #2  0x00000000004f8d3c in perf_hpp__setup_output_field () at ui/hist.c:554
     #3  0x00000000004c1d1e in setup_sorting () at util/sort.c:1984
     #4  0x000000000042efbf in cmd_report (argc=0, argv=0x7ffea5a0e790, prefix=<optimized out>) at builtin-report.c:874
     #5  0x0000000000476f13 in run_builtin (p=p@entry=0x875628 <commands+168>, argc=argc@entry=3, argv=argv@entry=0x7ffea5a0e790) at perf.c:385
     #6  0x000000000047710b in handle_internal_command (argc=3, argv=0x7ffea5a0e790) at perf.c:445
     #7  0x0000000000477176 in run_argv (argcp=argcp@entry=0x7ffea5a0e5fc, argv=argv@entry=0x7ffea5a0e5f0) at perf.c:489
     #8  0x00000000004773e7 in main (argc=3, argv=0x7ffea5a0e790) at perf.c:606

Using hpp_dimension__add_output function to register the output column.
It will also mark the dimension as taken and omit above stuck.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1444134312-29136-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-06 18:04:59 -03:00
Namhyung Kim 87bbdf768f perf tools: Pass struct perf_hpp_fmt to its callbacks
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt.  But it'll be needed by upcoming changes in
perf diff command.

Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-21 13:24:34 -03:00
Namhyung Kim 5ca8271022 perf hists: Fix children sort key behavior
When perf report --children resorts output fields, it tries to put
caller above the callee.  But this was only meaningful for a same thread
and doing this requires callchain enabled.  So fix its check before
comparing the callchain depth.

This also changes the hist accumulation tests: In test 3, xmalloc in
bash thread should be above than other perf threads due to alphabetical
order of comm string.  Also it's under page_fault in bash thread since
alphabetical order of dso name.  The sys_perf_event_open in perf thread
is put on the last line since it's self overhead is 0.

In test 4, the sys_perf_event_open is put above other perf entries that
have same children overhead since its callchain depth is smaller.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1419309381-2593-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-08 11:26:56 -03:00
Arjun Sreedharan e4e458b45c calloc/xcalloc: Fix argument order
The calloc() and xcalloc() functions takes @nmemb first and then @size.  Fix all w/
pattern "calloc\s*(\s*sizeof".

Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-12-09 10:06:29 -03:00
Jiri Olsa 2f3f9bcf00 perf tools: Add +field argument support for --field option
Adding support to add field(s) to default field order via using the '+'
prefix, like for report:

  $ perf report
  Samples: 10  of event 'cycles', Event count (approx.): 4463799
  Overhead  Command  Shared Object      Symbol
    32.40%  ls       [kernel.kallsyms]  [k] filemap_fault
    28.19%  ls       [kernel.kallsyms]  [k] get_page_from_freelist
    23.38%  ls       [kernel.kallsyms]  [k] enqueue_entity
    15.04%  ls       [kernel.kallsyms]  [k] mmap_region

  $ perf report -F +period,sample
  Samples: 10  of event 'cycles', Event count (approx.): 4463799
  Overhead        Period       Samples  Command  Shared Object      Symbol
    32.40%       1446493             1  ls       [kernel.kallsyms]  [k] filemap_fault
    28.19%       1258486             1  ls       [kernel.kallsyms]  [k] get_page_from_freelist
    23.38%       1043754             1  ls       [kernel.kallsyms]  [k] enqueue_entity
    15.04%        671160             1  ls       [kernel.kallsyms]  [k] mmap_region

Works in general for commands using --field option.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408715919-25990-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-24 08:11:19 -03:00
Namhyung Kim 2bfa152839 perf hists browser: Fix children overhead dump
When perf report runs on TUI, 'P' key dumps current screen to a file but
it incorrectly displayed children overhead (as same of self overhead).
This was because it fetched the value from self stats.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408522080-26556-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-20 12:14:14 -03:00
Namhyung Kim 1ecd44533a perf tools: Add name field into perf_hpp_fmt
It makes the code a bit simpler and easier to debug IMHO.

I guess it can also remove similar code in perf diff, but let's keep
it for a future work. :)

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 12:03:07 -03:00
Namhyung Kim 5b59166960 perf report: Honor column width setting
Set column width and do not change it if user gives -w/--column-widths
option.  It'll truncate longer symbols than the width if exists.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-08-12 12:03:06 -03:00