Pull thermal management fixes from Zhang Rui:
- Fix a race condition that sysfs could be accessed before necessary
initialization in int340x thermal driver. (Aaron Hill)
- Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan
Carpenter)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
drivers: thermal: int340x_thermal: Fix sysfs race condition
thermal: int340x_thermal: Fix a NULL vs IS_ERR() check
Changes since V1:
* Use dev_info instead of printk
* Use dev_warn instead of BUG_ON
Previously, sysfs_create_group was called before all initialization had
fully run - specifically, before pci_set_drvdata was called. Since the
sysctl group is visible to userspace as soon as sysfs_create_group
returns, a small window of time existed during which a process could read
from an uninitialized/partially-initialized device.
This commit moves the creation of the sysctl group to after all
initialized is completed. This ensures that it's impossible for
userspace to read from a sysctl file before initialization has fully
completed.
To catch any future regressions, I've added a check to ensure
that proc_thermal_emum_mode is never PROC_THERMAL_NONE when a process
tries to read from a sysctl file. Previously, the aforementioned race
condition could result in the 'else' branch
running while PROC_THERMAL_NONE was set,
leading to a null pointer deference.
Signed-off-by: Aaron Hill <aa1ronham@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
After commit 5d32a66541 (PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set) dependencies on CONFIG_PCI that previously were
satisfied implicitly through dependencies on CONFIG_ACPI have to be
specified directly.
IOSF_CORE depends on PCI. For this reason, add a direct dependency on
CONFIG_PCI.
Fixes: 5d32a66541 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull thermal management updates from Zhang Rui:
- Add locking for cooling device sysfs attribute in case the cooling
device state is changed by userspace and thermal framework
simultaneously. (Thara Gopinath)
- Fix a problem that passive cooling is reset improperly after system
suspend/resume. (Wei Wang)
- Cleanup the driver/thermal/ directory by moving intel and qcom
platform specific drivers to platform specific sub-directories. (Amit
Kucheria)
- Some trivial cleanups. (Lukasz Luba, Wolfram Sang)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal/intel: fixup for Kconfig string parsing tightening up
drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir
drivers: thermal: Move various drivers for intel platforms into a subdir
thermal: Fix locking in cooling device sysfs update cur_state
Thermal: do not clear passive state during system sleep
thermal: zx2967_thermal: simplify getting .driver_data
thermal: st: st_thermal: simplify getting .driver_data
thermal: spear_thermal: simplify getting .driver_data
thermal: rockchip_thermal: simplify getting .driver_data
thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data
thermal: remove unused function parameter
Pull thermal SoC updates from Eduardo Valentin:
- Tegra DT binding documentation for Tegra194
- Armada now supports ap806 and cp110
- RCAR thermal now supports R8A774C0 and R8A77990
- Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom,
Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers.
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits)
thermal: generic-adc: Fix adc to temp interpolation
thermal: rcar_thermal: add R8A77990 support
dt-bindings: thermal: rcar-thermal: add R8A77990 support
thermal: rcar_thermal: add R8A774C0 support
dt-bindings: thermal: rcar-thermal: add R8A774C0 support
dt-bindings: cp110: document the thermal interrupt capabilities
dt-bindings: ap806: document the thermal interrupt capabilities
MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver
thermal: armada: add overheat interrupt support
thermal: st: fix Makefile typo
thermal: uniphier: Convert to SPDX identifier
thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro
thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
thermal: imx: save one condition block for normal case of nvmem initialization
thermal: imx: fix for dependency on cpu-freq
thermal: tsens: qcom: do not create duplicate regmap debugfs entries
thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()
dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts
thermal: broadcom: use devm_thermal_zone_of_sensor_register
...
First correct the edge case to return the last element if we're
outside the range, rather than at the last element, so that
interpolation is not omitted for points between the two last entries in
the table.
Then correct the formula to perform linear interpolation based the two
points surrounding the read ADC value. The indices for temp are kept as
"hi" and "lo" to pair with the adc indices, but there's no requirement
that the temperature is provided in descendent order. mult_frac() is
used to prevent issues with overflowing the int.
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The IP can manage to trigger interrupts on overheat situation from all
the sensors.
However, the interrupt source changes along with the last selected
source (ie. the last read sensor), which is an inconsistent behavior.
Avoid possible glitches by always selecting back only one channel which
will then be referenced as the "overheat_sensor" (arbitrarily: the first
in the DT which has a critical trip point filled in).
It is possible that the scan of all thermal zone nodes did not bring a
critical trip point from which the overheat interrupt could be
configured. In this case just complain but do not fail the probe.
Also disable sensor switch during overheat situations because changing
the channel while the system is too hot could clear the overheat state
by changing the source while the temperature is still very high.
Even if the overheat state is not declared, overheat interrupt must be
cleared by reading the DFX interrupt cause _after_ the temperature has
fallen down to the low threshold, otherwise future possible interrupts
would not be served. A work polls the corresponding register until the
overheat flag gets cleared in this case.
Suggested-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When STM32_THERMAL is enabled, this overrides all previously
enabled files in the same directory, as seen from this link failure:
ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined!
The correct syntax in Makefile requires using += instead of :=.
Fixes: 1d69315560 ("thermal: add stm32 thermal driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Put return value checks of calling imx_init_from_nvmem_cells()
into one block to save one condition block for normal case.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal driver is a standalone driver for monitoring SoC temperature
by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ
is NOT set. So remove the dependency with CPU_THERMAL.
Introduce dummy function of legacy cooling register/unregister to make
thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Regmap would use device name to create debugfs entries. If the device
has multiple regmaps it is recommended to use name field in regmap_config.
Fix this by providing name to the regmap configs correctly.
Without this patch we would see below error on DB820c.
qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor
debugfs directory
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Using devm_thermal_zone_of_sensor_register allows to simplify some
error handling code, drop a label, and drop the remove function.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
By defaul of-based thermal driver do not enable hwmon.
This patch does this explicitly, so that the temperature can be read
through the common hwmon sysfs.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Avoid warnings like this:
thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function]
thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
Fixes: 0dd88793aa ("thermal: hwmon: move hwmon support to single file")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3Fl
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Adding brackets allows to multiply the register value,
masked by TS1_RAMP_COEFF_MASK, by an ADJUST value
properly and not to multiply ADJUST by register value and
then mask the whole.
Fixes: 1d693155 ("thermal: add stm32 thermal driver")
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Calling stm_thermal_read_factory_settings before clocking
internal peripheral causes bad register values and makes
temperature computation wrong.
Calling stm_thermal_read_factory_settings inside
stm_thermal_prepare fixes this problem as internal
peripheral is well clocked at this stage.
Fixes: 1d693155 ("thermal: add stm32 thermal driver")
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: David Hernandez Sanchez <david.hernandezsanchez@st.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Without this patch the thermal driver is broken on hi3660.
The dual sensors support patchset was partially merged, unfortunately
the dual thermal zones definition is not available in the DT yet, so
when the driver tries to register all the sensors that fails.
By reducing to 1 the number of sensors on the hi3660, we switch back
to the previous functionnality.
Fixes: 8c6c36846f (thermal/drivers/hisi: Add the dual clusters sensors for hi3660)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Without this patch, the thermal driver on hi6220 and hi3660 is broken.
That is due because part of the posted patchset was merged but a small
change in the DT was dropped.
The hi6220 and hi3660 do not have an interrupt name in the DT, so
finding interrupt by name fails.
Fix this by returning back to the platform_get_irq() function call.
Fixes: 2cffaeff08 (thermal/drivers/hisi: Use platform_get_irq_byname)
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This cleans up the directory a bit allowing just one place to look for
thermal related drivers for QCOM platforms instead of being scattered in
the root directory and the qcom/ subdirectory. Compile-tested with
ARCH=arm64 defconfig and the driver explicitly enabled with menuconfig.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This cleans up the directory a bit, now that we have several other
platforms using platform-specific sub-directories. Compile-tested with
ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
The thermal_zone_of_device_ops structure can be const as it is only
passed as the last argument of devm_thermal_zone_of_sensor_register
and the corresponding parameter is declared as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When the armada thermal module is inserted, removed and then reinserted,
the system panics as per the messages below. The reason is that "edit"
a live resource in the resource tree twice, and end up with it pointing
to some other hardware.
Editing live resources (resources that are part of the registered
resource tree) is not permissible - the resource tree is an ordered
set of resources, sorted by start address, and when a new resource is
inserted, it is validated that it (a) fits within its parent resource
and (b) does not overlap a neighbouring resource.
Get rid of this resource editing. We can instead adjust the return
value from ioremap() as ioremap() deals with the creation of page-
based mappings - provided the adjustment does not cross a page
boundary.
SError Interrupt on CPU1, code 0xbf000000 -- SError
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
pstate: 20400085 (nzCv daIf +PAN -UAO)
pc : regmap_mmio_read+0x3c/0x60
lr : regmap_mmio_read+0x3c/0x60
sp : ffffff800d453900
x29: ffffff800d453900 x28: ffffff800096a1d0
x27: 0000000000000100 x26: ffffff80009696d8
x25: ffffff8000969000 x24: ffffffc13a588918
x23: ffffffc13a9a28a8 x22: ffffff800d4539dc
x21: 0000000000000084 x20: ffffff800d4539dc
x19: ffffffc13a5d5480 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000030
x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
x9 : 0000000000000000 x8 : ffffffc13a5d5a80
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffff800851be70 x2 : ffffff800851bd60
x1 : ffffff800d492ff8 x0 : 0000000000000000
Kernel panic - not syncing: Asynchronous SError Interrupt
CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175
Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT)
Call trace:
dump_backtrace+0x0/0x158
show_stack+0x14/0x1c
dump_stack+0x90/0xb0
panic+0x128/0x298
print_tainted+0x0/0xa8
arm64_serror_panic+0x74/0x80
do_serror+0x5c/0xb8
el1_error+0xb4/0x144
regmap_mmio_read+0x3c/0x60
_regmap_bus_reg_read+0x18/0x20
_regmap_read+0x64/0x180
regmap_read+0x44/0x6c
armada_ap806_init+0x24/0x5c [armada_thermal]
armada_thermal_probe+0x2c8/0x37c [armada_thermal]
platform_drv_probe+0x4c/0xb0
really_probe+0x21c/0x2b4
driver_probe_device+0x58/0xfc
__driver_attach+0xd4/0xd8
bus_for_each_dev+0x50/0xa0
driver_attach+0x20/0x28
bus_add_driver+0x1c4/0x228
driver_register+0x6c/0x124
__platform_driver_register+0x4c/0x54
armada_thermal_driver_init+0x20/0x1000 [armada_thermal]
do_one_initcall+0x30/0x204
do_init_module+0x5c/0x1d4
load_module+0x1a88/0x212c
__se_sys_finit_module+0xa0/0xac
__arm64_sys_finit_module+0x1c/0x24
el0_svc_common+0x94/0xf0
el0_svc_handler+0x24/0x80
el0_svc+0x8/0x3c0
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x0,21806000
Memory Limit: none
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Commit 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid()
pointer") removed the unnecessary indirection through a function
pointer, but in doing so, also removed the negation operator too:
- if (priv->data->is_valid && !priv->data->is_valid(priv)) {
+ if (armada_is_valid(priv)) {
which results in:
armada_thermal f06f808c.thermal: Temperature sensor reading not valid
armada_thermal f2400078.thermal: Temperature sensor reading not valid
armada_thermal f4400078.thermal: Temperature sensor reading not valid
at boot, or whenever the "temp" sysfs file is read. Replace the
negation operator.
Fixes: 8c0e64ac40 ("thermal: armada: get rid of the ->is_valid() pointer")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Sysfs interface to update cooling device cur_state does not
currently holding cooling device lock sometimes leading to
stale values in cur_state if getting updated simultanelously
from user space and thermal framework. Adding the proper locking
code fixes this issue.
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
commit ff140fea84 ("Thermal: handle thermal zone device properly
during system sleep") added PM hook to call thermal zone reset during
sleep. However resetting thermal zone will also clear the passive state
and thus cancel the polling queue which leads the passive cooling device
state not being cleared properly after sleep.
thermal_pm_notify => thermal_zone_device_reset set passive to 0
thermal_zone_trip_update will skip update passive as `old_target ==
instance->target'.
monitor_thermal_zone => thermal_zone_device_set_polling will cancel
tz->poll_queue, so the cooling device state will not be changed
afterwards.
Reported-by: Kame Wang <kamewang@google.com>
Signed-off-by: Wei Wang <wvw@google.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Pull thermal management updates from Zhang Rui:
- Fix a use-after-free issue when unregistering a thermal cooling
device (Dmitry Osipenko)
- use power_efficient_wq for thermal worker to save more power (Jeson
Gao)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: core: using power_efficient_wq for thermal worker
thermal: core: Fix use-after-free in thermal_cooling_device_destroy_sysfs
Pull thermal SoC updates from Eduardo Valentin:
"Several new things coming up. Specifics:
- Rework of tsens and hisi thermal drivers
- OF-thermal now allows sharing multiple cooling devices on maps
- Added support for r8a7744 and R8A77970 on rcar thermal driver
- Added support for r8a774a1 on rcar_gen3 thermal driver
- New thermal driver stm32
- Fixes on multiple thermal drivers: of-thermal, imx, qoriq, armada,
qcom-spmi, rcar, da9062/61"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (41 commits)
thermal: da9062/61: Prevent hardware access during system suspend
thermal: rcar_thermal: Prevent doing work after unbind
thermal: rcar_thermal: Prevent hardware access during system suspend
thermal: rcar_gen3_thermal: add R8A77980 support
dt-bindings: thermal: rcar-gen3-thermal: document R8A77980 bindings
thermal: add stm32 thermal driver
dt-bindings: stm32-thermal: add binding documentation
thermal: rcar_thermal: add R8A77970 support
dt-bindings: thermal: rcar-thermal: document R8A77970 bindings
thermal: rcar_thermal: fix duplicate IRQ request
dt-bindings: thermal: rcar: Add device tree support for r8a7744
thermal/drivers/hisi: Add the dual clusters sensors for hi3660
thermal/drivers/hisi: Add more sensors channel
thermal/drivers/hisi: Remove pointless irq field
thermal/drivers/hisi: Use platform_get_irq_byname
thermal/drivers/hisi: Replace macro name with relevant sensor location
thermal/drivers/hisi: Add multiple sensors support
thermal/drivers/hisi: Prepare to support multiple sensors
thermal/drivers/hisi: Factor out the probe functions
thermal/drivers/hisi: Set the thermal zone private data to the sensor pointer
...
The workqueue used for monitoring the hardware may run while the device
is already suspended. Fix this by using the freezable system workqueue
instead, cfr. commit 51e20d0e3a ("thermal: Prevent polling from
happening during system suspend").
Fixes: 608567aac3 ("thermal: da9062/61: Thermal junction temperature monitoring driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
When testing bind/unbind on r8a7791/koelsch:
WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10
This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.
Fixes: e0a5172e9e ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
On r8a7791/koelsch, sometimes the following message is printed during
system suspend:
rcar_thermal e61f0000.thermal: thermal sensor was broken
This happens if the workqueue runs while the device is already
suspended. Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a ("thermal: Prevent polling from happening
during system suspend").
Fixes: e0a5172e9e ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Add the R-Car V3H (R8A77980) SoC support to the R-Car gen3 thermal driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Linus Torvalds