clock_nanosleep() accepts absolute values of expiration time, if the
TIMER_ABSTIME flag is set. This value is in the tasks time namespace,
which has to be converted to the host time namespace.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-18-dima@arista.com
clock_nanosleep() accepts absolute values of expiration time when
TIMER_ABSTIME flag is set. This absolute value is inside the task's
time namespace, and has to be converted to the host's time.
There is timens_ktime_to_host() helper for converting time, but
it accepts ktime argument.
As a preparation, make hrtimer_nanosleep() accept a clock value in ktime
instead of timespec64.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-17-dima@arista.com
Wire timer_settime() syscall into time namespace virtualization.
sys_timer_settime() calls the ktime->timer_set() callback. Right now,
common_timer_set() is the only implementation for the callback.
The user-supplied expiry value is converted from timespec64 to ktime and
then timens_ktime_to_host() can be used to convert namespace's time to the
host time.
Inside a time namespace kernel's time differs by a fixed offset from a
user-supplied time, but only absolute values (TIMER_ABSTIME) must be
converted.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-15-dima@arista.com
Adjust monotonic and boottime clocks with per-timens offsets. As the
result a process inside time namespace will see timers and clocks corrected
to offsets that were set when the namespace was created
Note that applications usually go through vDSO to get time, which is not
yet adjusted. Further changes will complete time namespace virtualisation
with vDSO support.
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-12-dima@arista.com
Now, when the clock_get_ktime() callback exists, the suboptimal
timespec64-based conversion can be removed from common_timer_get().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-11-dima@arista.com
The callsite in common_timer_get() has already a comment:
/*
* The timespec64 based conversion is suboptimal, but it's not
* worth to implement yet another callback.
*/
kc->clock_get(timr->it_clock, &ts64);
now = timespec64_to_ktime(ts64);
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-10-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format in (struct k_clock).
As a preparation ground for introducing clock_get_ktime(), the original
callback clock_get() was renamed into clock_get_timespec().
Reflect the renaming into the callback implementations.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-7-dima@arista.com
The upcoming support for time namespaces requires to have access to:
- The time in a task's time namespace for sys_clock_gettime()
- The time in the root name space for common_timer_get()
That adds a valid reason to finally implement a separate callback which
returns the time in ktime_t format, rather than in (struct timespec).
Rename the clock_get() callback to clock_get_timespec() as a preparation
for introducing clock_get_ktime().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-6-dima@arista.com
The handling of a priority inversion between timer cancelling and a a not
well defined possible preemption of softirq kthread is not very clear.
Especially in the posix timers side it's unclear why there is a specific RT
wait callback.
All the nice explanations can be found in the initial changelog of
f61eff83ce (hrtimer: Prepare support for PREEMPT_RT").
Extract the detailed informations from there and put it into comments.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190820132656.GC2093@lenoir
Posix timer delete retry loops are affected by the same priority inversion
and live lock issues as the other timers.
Provide a RT specific synchronization function which keeps a reference to
the timer by holding rcu read lock to prevent the timer from being freed,
dropping the timer lock and invoking the timer specific wait function via a
new callback.
This does not yet cover posix CPU timers because they need more special
treatment on PREEMPT_RT.
[ This is folded into the original attempt which did not use a callback. ]
Originally-by: Anna-Maria Gleixenr <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lkml.kernel.org/r/20190819143801.656864506@linutronix.de
Timer deletion on PREEMPT_RT is prone to priority inversion and live
locks. The hrtimer code has a synchronization mechanism for this. Posix CPU
timers will grow one.
But that mechanism cannot be invoked while holding the k_itimer lock
because that can deadlock against the running timer callback. So the lock
must be dropped which allows the timer to be freed.
The timer free can be prevented by taking RCU readlock before dropping the
lock, but because the rcu_head is part of the 'it' union a concurrent free
will overwrite the hrtimer on which the task is trying to synchronize.
Move the rcu_head out of the union to prevent this.
[ tglx: Fixed up kernel-doc. Rewrote changelog ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.965541887@linutronix.de
As a preparatory step for adding the PREEMPT RT specific synchronization
mechanism to wait for a running timer callback, rework the timer cancel
retry loops so they call a common function. This allows trivial
substitution in one place.
Originally-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.874901027@linutronix.de
do_timer_settime() has a 'flags' argument and uses 'flag' for the interrupt
flags, which is confusing at best.
Rename the argument so 'flags' can be used for interrupt flags as usual.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190730223828.782664411@linutronix.de
itimer_delete() uses spin_lock_irqsave() to obtain a `flags' variable
which can then be passed to unlock_timer(). It uses already spin_lock
locking for the structure instead of lock_timer() because it has a timer
which can not be removed by others at this point. The cleanup is always
performed with enabled interrupts.
Use spin_lock_irq() / spin_unlock_irq() so the `flags' variable can be
removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190621143643.25649-3-bigeasy@linutronix.de
itimer_delete() is invoked during do_exit(). At this point it is the
last thread in the group dying and doing the clean up.
Since it is the last thread in the group, there can not be any other
task attempting to lock the itimer which means the NULL assignment (which
avoids lookups in __lock_timer()) is not required.
The assignment and comment was copied in commit 0e568881178ff ("[PATCH]
fix posix-timers to have proper per-process scope") from
sys_timer_delete() which was/is the syscall interface and requires the
assignment.
Remove the superfluous ->it_signal = NULL assignment.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190621143643.25649-2-bigeasy@linutronix.de
A lot of system calls that pass a time_t somewhere have an implementation
using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have
been reworked so that this implementation can now be used on 32-bit
architectures as well.
The missing step is to redefine them using the regular SYSCALL_DEFINEx()
to get them out of the compat namespace and make it possible to build them
on 32-bit architectures.
Any system call that ends in 'time' gets a '32' suffix on its name for
that version, while the others get a '_time32' suffix, to distinguish
them from the normal version, which takes a 64-bit time argument in the
future.
In this step, only 64-bit architectures are changed, doing this rename
first lets us avoid touching the 32-bit architectures twice.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex is not y2038 safe.
Switch all the syscall apis to use y2038 safe __kernel_timex.
Note that sys_adjtimex() does not have a y2038 safe solution. C libraries
can implement it by calling clock_adjtime(CLOCK_REALTIME, ...).
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
struct timex is not y2038 safe.
Replace all uses of timex with y2038 safe __kernel_timex.
Note that struct __kernel_timex is an ABI interface definition.
We could define a new structure based on __kernel_timex that
is only available internally instead. Right now, there isn't
a strong motivation for this as the structure is isolated to
a few defined struct timex interfaces and such a structure would
be exactly the same as struct timex.
The patch was generated by the following coccinelle script:
virtual patch
@depends on patch forall@
identifier ts;
expression e;
@@
(
- struct timex ts;
+ struct __kernel_timex ts;
|
- struct timex ts = {};
+ struct __kernel_timex ts = {};
|
- struct timex ts = e;
+ struct __kernel_timex ts = e;
|
- struct timex *ts;
+ struct __kernel_timex *ts;
|
(memset \| copy_from_user \| copy_to_user \)(...,
- sizeof(struct timex))
+ sizeof(struct __kernel_timex))
)
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts,
+ struct __kernel_timex *ts,
...) {
...
}
@depends on patch forall@
identifier ts;
identifier fn;
@@
fn(...,
- struct timex *ts) {
+ struct __kernel_timex *ts) {
...
}
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: linux-alpha@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sparc64 is the only architecture on Linux that has a 'timeval'
definition with a 32-bit tv_usec but a 64-bit tv_sec. This causes
problems for sparc32 compat mode when we convert it to use the
new __kernel_timex type that has the same layout as all other
64-bit architectures.
To avoid adding sparc64 specific code into the generic adjtimex
implementation, this adds a wrapper in the sparc64 system call handling
that converts the sparc64 'timex' into the new '__kernel_timex'.
At this point, the two structures are defined to be identical,
but that will change in the next step once we convert sparc32.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We want to reuse the compat_timex handling on 32-bit architectures the
same way we are using the compat handling for timespec when moving to
64-bit time_t.
Move all definitions related to compat_timex out of the compat code
into the normal timekeeping code, along with a rename to old_timex32,
corresponding to the timespec/timeval structures, and make it controlled
by CONFIG_COMPAT_32BIT_TIME, which 32-bit architectures will then select.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull timer updates from Thomas Gleixner:
"The timer department delivers the following christmas presents:
Core code:
- Use proper seqcount initializer to make lockdep happy
- SPDX annotations and cleanup of license boilerplates
- Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it
- Minor cleanups
Driver code:
- Add the sched_clock for the arc timer (Alexey Brodkin)
- Change the file timer names for riscv, rockchip, tegra20, sun4i and
meson6 (Daniel Lezcano)
- Add the DT bindings for r8a7796, r8a77470 and r8a774a1 (Biju Das)
- Remove the early platform driver registration for timer-ti-dm
(Bartosz Golaszewski)
- Provide the sched_clock for the riscv timer (Anup Patel)
- Add support for ARM64 for the imx-gpt and convert the imx-tpm to
the timer-of API (Anson Huang)
- Remove useless irq protection for the imx-gpt (Clément Péron)
- Remove a duplicate function name for the vt8500 (Dan Carpenter)
- Remove obsolete inclusion of <asm/smp_twd.h> for the tegra20 (Geert
Uytterhoeven)
- Demote the prcmu and the custom sched_clock for the dbx500 and the
ux500 (Linus Walleij)
- Add a new timer clock for the RDA8810PL (Manivannan Sadhasivam)
- Rename the macro to stick to the register name and add the delay
timer (Martin Blumenstingl)
- Switch the bcm2835 to the SPDX identifier (Stefan Wahren)
- Fix the interrupt register access on the fttmr010 (Tao Ren)
- Add missing of_node_put in the initialization path on the
integrator-ap (Yangtao Li)"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
dt-bindings: timer: Document RDA8810PL SoC timer
clocksource/drivers/rda: Add clock driver for RDA8810PL SoC
clocksource/drivers/meson6: Change name meson6_timer timer-meson6
clocksource/drivers/sun4i: Change name sun4i_timer to timer-sun4i
clocksource/drivers/tegra20: Change name tegra20_timer to timer-tegra20
clocksource/drivers/rockchip: Change name rockchip_timer to timer-rockchip
clocksource/drivers/riscv: Change name riscv_timer to timer-riscv
clocksource/drivers/riscv_timer: Provide the sched_clock
clocksource/drivers/timer-imx-tpm: Specify clock name for timer-of
clocksource/drivers/fttmr010: Fix invalid interrupt register access
clocksource/drivers/integrator-ap: Add missing of_node_put()
clocksource/drivers/bcm2835: Switch to SPDX identifier
dt-bindings: timer: renesas, cmt: Document r8a774a1 CMT support
clocksource/drivers/timer-imx-tpm: Convert the driver to timer-of
clocksource/drivers/arc_timer: Utilize generic sched_clock
dt-bindings: timer: renesas, cmt: Document r8a77470 CMT support
dt-bindings: timer: renesas, cmt: Document r8a7796 CMT support
clocksource/drivers/imx-gpt: Remove unnecessary irq protection
clocksource/drivers/imx-gpt: Add support for ARM64
clocksource/drivers/meson6_timer: Implement the ARM delay timer
...
The signal delivery path of posix-timers can try to rearm the timer even if
the interval is zero. That's handled for the common case (hrtimer) but not
for alarm timers. In that case the forwarding function raises a division by
zero exception.
The handling for hrtimer based posix timers is wrong because it marks the
timer as active despite the fact that it is stopped.
Move the check from common_hrtimer_rearm() to posixtimer_rearm() to cure
both issues.
Reported-by: syzbot+9d38bedac9cc77b8ad5e@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: sboyd@kernel.org
Cc: stable@vger.kernel.org
Cc: syzkaller-bugs@googlegroups.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1812171328050.1880@nanos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The SPDX identifier defines the license of the file already. No need for
the boilerplate.
Remove also the completely outdated Montavista snail mail address.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: David Riley <davidriley@chromium.org>
Cc: Colin Cross <ccross@android.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lkml.kernel.org/r/20181031182253.479792883@linutronix.de
Update the time(r) core files files with the correct SPDX license
identifier based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of the
full boiler plate text.
This work is based on a script and data from Philippe Ombredanne, Kate
Stewart and myself. The data has been created with two independent license
scanners and manual inspection.
The following files do not contain any direct license information and have
been omitted from the big initial SPDX changes:
timeconst.bc: The .bc files were not touched
time.c, timer.c, timekeeping.c: Licence was deduced from EXPORT_SYMBOL_GPL
As those files do not contain direct license references they fall under the
project license, i.e. GPL V2 only.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: David Riley <davidriley@chromium.org>
Cc: Colin Cross <ccross@android.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20181031182252.879109557@linutronix.de
Remove the pointless filenames in the top level comments. They have no
value at all and just occupy space. While at it tidy up some of the
comments and remove a stale one.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: David Riley <davidriley@chromium.org>
Cc: Colin Cross <ccross@android.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lkml.kernel.org/r/20181031182252.794898238@linutronix.de
Pull timekeeping updates from Thomas Gleixner:
"The timers and timekeeping departement provides:
- Another large y2038 update with further preparations for providing
the y2038 safe timespecs closer to the syscalls.
- An overhaul of the SHCMT clocksource driver
- SPDX license identifier updates
- Small cleanups and fixes all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tick/sched : Remove redundant cpu_online() check
clocksource/drivers/dw_apb: Add reset control
clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
clocksource/drivers: Unify the names to timer-* format
clocksource/drivers/sh_cmt: Add R-Car gen3 support
dt-bindings: timer: renesas: cmt: document R-Car gen3 support
clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
clocksource/drivers/sh_cmt: Fixup for 64-bit machines
clocksource/drivers/sh_tmu: Convert to SPDX identifiers
clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
clocksource/drivers/sh_cmt: Convert to SPDX identifiers
clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
clocksource: Convert to using %pOFn instead of device_node.name
tick/broadcast: Remove redundant check
RISC-V: Request newstat syscalls
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
y2038: socket: Change recvmmsg to use __kernel_timespec
y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
y2038: utimes: Rework #ifdef guards for compat syscalls
...
Linus recently observed that if we did not worry about the padding
member in struct siginfo it is only about 48 bytes, and 48 bytes is
much nicer than 128 bytes for allocating on the stack and copying
around in the kernel.
The obvious thing of only adding the padding when userspace is
including siginfo.h won't work as there are sigframe definitions in
the kernel that embed struct siginfo.
So split siginfo in two; kernel_siginfo and siginfo. Keeping the
traditional name for the userspace definition. While the version that
is used internally to the kernel and ultimately will not be padded to
128 bytes is called kernel_siginfo.
The definition of struct kernel_siginfo I have put in include/signal_types.h
A set of buildtime checks has been added to verify the two structures have
the same field offsets.
To make it easy to verify the change kernel_siginfo retains the same
size as siginfo. The reduction in size comes in a following change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Christoph Hellwig suggested a slightly different path for handling
backwards compatibility with the 32-bit time_t based system calls:
Rather than simply reusing the compat_sys_* entry points on 32-bit
architectures unchanged, we get rid of those entry points and the
compat_time types by renaming them to something that makes more sense
on 32-bit architectures (which don't have a compat mode otherwise),
and then share the entry points under the new name with the 64-bit
architectures that use them for implementing the compatibility.
The following types and interfaces are renamed here, and moved
from linux/compat_time.h to linux/time32.h:
old new
--- ---
compat_time_t old_time32_t
struct compat_timeval struct old_timeval32
struct compat_timespec struct old_timespec32
struct compat_itimerspec struct old_itimerspec32
ns_to_compat_timeval() ns_to_old_timeval32()
get_compat_itimerspec64() get_old_itimerspec32()
put_compat_itimerspec64() put_old_itimerspec32()
compat_get_timespec64() get_old_timespec32()
compat_put_timespec64() put_old_timespec32()
As we already have aliases in place, this patch addresses only the
instances that are relevant to the system call interface in particular,
not those that occur in device drivers and other modules. Those
will get handled separately, while providing the 64-bit version
of the respective interfaces.
I'm not renaming the timex, rusage and itimerval structures, as we are
still debating what the new interface will look like, and whether we
will need a replacement at all.
This also doesn't change the names of the syscall entry points, which can
be done more easily when we actually switch over the 32-bit architectures
to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to
SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull core signal handling updates from Eric Biederman:
"It was observed that a periodic timer in combination with a
sufficiently expensive fork could prevent fork from every completing.
This contains the changes to remove the need for that restart.
This set of changes is split into several parts:
- The first part makes PIDTYPE_TGID a proper pid type instead
something only for very special cases. The part starts using
PIDTYPE_TGID enough so that in __send_signal where signals are
actually delivered we know if the signal is being sent to a a group
of processes or just a single process.
- With that prep work out of the way the logic in fork is modified so
that fork logically makes signals received while it is running
appear to be received after the fork completes"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (22 commits)
signal: Don't send signals to tasks that don't exist
signal: Don't restart fork when signals come in.
fork: Have new threads join on-going signal group stops
fork: Skip setting TIF_SIGPENDING in ptrace_init_task
signal: Add calculate_sigpending()
fork: Unconditionally exit if a fatal signal is pending
fork: Move and describe why the code examines PIDNS_ADDING
signal: Push pid type down into complete_signal.
signal: Push pid type down into __send_signal
signal: Push pid type down into send_signal
signal: Pass pid type into do_send_sig_info
signal: Pass pid type into send_sigio_to_task & send_sigurg_to_task
signal: Pass pid type into group_send_sig_info
signal: Pass pid and pid type into send_sigqueue
posix-timers: Noralize good_sigevent
signal: Use PIDTYPE_TGID to clearly store where file signals will be sent
pid: Implement PIDTYPE_TGID
pids: Move the pgrp and session pid pointers from task_struct to signal_struct
kvm: Don't open code task_pid in kvm_vcpu_ioctl
pids: Compute task_tgid using signal->leader_pid
...
Pull parisc updates from Helge Deller:
- parisc now uses the generic dma_noncoherent_ops implementation
(Christoph Hellwig)
- further memory barrier and spinlock improvements (John David Anglin)
- prepare removal of current_text_addr() functions (Nick Desaulniers)
- improve kernel stack unwinding on parisc (me)
- drop ENOTSUP which was defined on parisc only (me)
* 'parisc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix and improve kernel stack unwinding
parisc: Remove unnecessary barriers from spinlock.h
parisc: Remove ordered stores from syscall.S
parisc: prefer _THIS_IP_ and _RET_IP_ statement expressions
parisc: Add HAVE_REGS_AND_STACK_ACCESS_API feature
parisc: Drop architecture-specific ENOTSUP define
parisc: use generic dma_noncoherent_ops
parisc: always use flush_kernel_dcache_range for DMA cache maintainance
parisc: merge pcx_dma_ops and pcxl_dma_ops
parisc is the only Linux architecture which has defined a value for ENOTSUP.
All other architectures #define ENOTSUP as EOPNOTSUPP in their libc headers.
Having an own value for ENOTSUP which is different than EOPNOTSUPP often gives
problems with userspace programs which expect both to be the same. One such
example is a build error in the libuv package, as can be seen in
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900237.
Since we dropped HP-UX support, there is no real benefit in keeping an own
value for ENOTSUP. This patch drops the parisc value for ENOTSUP from the
kernel sources. glibc needs no patch, it reuses the exported headers.
Signed-off-by: Helge Deller <deller@gmx.de>
Make the code more maintainable by performing more of the signal
related work in send_sigqueue.
A quick inspection of do_timer_create will show that this code path
does not lookup a thread group by a thread's pid. Making it safe
to find the task pointed to by it_pid with "pid_task(it_pid, type)";
This supports the changes needed in fork to tell if a signal was sent
to a single process or a group of processes.
Having the pid to task transition in signal.c will also make it easier
to sort out races with de_thread and and the thread group leader
exiting when it comes time to address that.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In good_sigevent directly compute the default return value as
"task_tgid(current)". This is exactly the same as
"task_pid(current->group_leader)" but written more clearly.
In the thread case first compute the thread's pid. Then veify that
attached to that pid is a thread of the current thread group.
This has the net effect of making the code a little clearer, and
making it obvious that posix timers never look up a process by a the
pid of a thread.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The posix timer overrun handling is broken because the forwarding functions
can return a huge number of overruns which does not fit in an int. As a
consequence timer_getoverrun(2) and siginfo::si_overrun can turn into
random number generators.
The k_clock::timer_forward() callbacks return a 64 bit value now. Make
k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal
accounting is correct. 3Remove the temporary (int) casts.
Add a helper function which clamps the overrun value returned to user space
via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value
between 0 and INT_MAX. INT_MAX is an indicator for user space that the
overrun value has been clamped.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de
The posix timer ti_overrun handling is broken because the forwarding
functions can return a huge number of overruns which does not fit in an
int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn
into random number generators.
As a first step to address that let the timer_forward() callbacks return
the full 64 bit value.
Cast it to (int) temporarily until k_itimer::ti_overrun is converted to
64bit and the conversion to user space visible values is sanitized.
Reported-by: Team OWL337 <icytxw@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Link: https://lkml.kernel.org/r/20180626132704.922098090@linutronix.de
Some of the oddly named time accessor functions now have a more consistent
naming, which should be used from now on so the aliases can be removed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: y2038@lists.linaro.org
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/20180618143246.3865099-1-arnd@arndb.de
Revert commits
92af4dcb4e ("tracing: Unify the "boot" and "mono" tracing clocks")
127bfa5f43 ("hrtimer: Unify MONOTONIC and BOOTTIME clock behavior")
7250a4047a ("posix-timers: Unify MONOTONIC and BOOTTIME clock behavior")
d6c7270e91 ("timekeeping: Remove boot time specific code")
f2d6fdbfd2 ("Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior")
d6ed449afd ("timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock")
72199320d4 ("timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock")
As stated in the pull request for the unification of CLOCK_MONOTONIC and
CLOCK_BOOTTIME, it was clear that we might have to revert the change.
As reported by several folks systemd and other applications rely on the
documented behaviour of CLOCK_MONOTONIC on Linux and break with the above
changes. After resume daemons time out and other timeout related issues are
observed. Rafael compiled this list:
* systemd kills daemons on resume, after >WatchdogSec seconds
of suspending (Genki Sky). [Verified that that's because systemd uses
CLOCK_MONOTONIC and expects it to not include the suspend time.]
* systemd-journald misbehaves after resume:
systemd-journald[7266]: File /var/log/journal/016627c3c4784cd4812d4b7e96a34226/system.journal
corrupted or uncleanly shut down, renaming and replacing.
(Mike Galbraith).
* NetworkManager reports "networking disabled" and networking is broken
after resume 50% of the time (Pavel). [May be because of systemd.]
* MATE desktop dims the display and starts the screensaver right after
system resume (Pavel).
* Full system hang during resume (me). [May be due to systemd or NM or both.]
That happens on debian and open suse systems.
It's sad, that these problems were neither catched in -next nor by those
folks who expressed interest in this change.
Reported-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Reported-by: Genki Sky <sky@genki.is>,
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Change over clock_nanosleep syscalls to use y2038 safe
__kernel_timespec times. This will enable changing over
of these syscalls to use new y2038 safe syscalls when
the architectures define the CONFIG_64BIT_TIME.
Note that nanosleep syscall is deprecated and does not have a
plan for making it y2038 safe. But, the syscall should work as
before on 64 bit machines and on 32 bit machines, the syscall
works correctly until y2038 as before using the existing compat
syscall version. There is no new syscall for supporting 64 bit
time_t on 32 bit architectures.
Cc: linux-api@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change over clock_settime, clock_gettime and clock_getres
syscalls to use __kernel_timespec times. This will enable
changing over of these syscalls to use new y2038 safe syscalls
when the architectures define the CONFIG_64BIT_TIME.
Cc: linux-api@vger.kernel.org
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
clock_gettime, clock_settime, clock_getres and clock_nanosleep
compat syscalls are also repurposed to provide backward compatibility
to support 32 bit time_t on 32 bit systems.
Note that nanosleep compat syscall will also be treated the same way
as the above syscalls as it shares common handler functions with
clock_nanosleep. But, there is no plan to provide y2038 safe solution
for nanosleep.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull time(r) updates from Thomas Gleixner:
"A small set of updates for timers and timekeeping:
- The most interesting change is the consolidation of clock MONOTONIC
and clock BOOTTIME.
Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
not longer ignore the time spent in suspend. A new clock
MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
kernels before this change. This allows applications to
programmatically check for the clock MONOTONIC behaviour.
As discussed in the review thread, this has the potential of
breaking user space and we might have to revert this. Knock on wood
that we can avoid that exercise.
- Updates to the NTP mechanism to improve accuracy
- A new kernel internal data structure to aid the ongoing Y2038 work.
- Cleanups and simplifications of the clocksource code.
- Make the alarmtimer code play nicely with debugobjects"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Init nanosleep alarm timer on stack
y2038: Introduce struct __kernel_old_timeval
tracing: Unify the "boot" and "mono" tracing clocks
hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Remove boot time specific code
Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
timekeeping/ntp: Determine the multiplier directly from NTP tick length
timekeeping/ntp: Don't align NTP frequency adjustments to ticks
clocksource: Use ATTRIBUTE_GROUPS
clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
clocksource: Don't walk the clocksource list for empty override
The clockid argument of clockid_to_kclock() comes straight from user space
via various syscalls and is used as index into the posix_clocks array.
Protect it against spectre v1 array out of bounds speculation. Remove the
redundant check for !posix_clock[id] as this is another source for
speculation and does not provide any advantage over the return
posix_clock[id] path which returns NULL in that case anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802151718320.1296@nanos.tec.linutronix.de
Now that the MONOTONIC and BOOTTIME clocks are indentical remove all the special
casing.
The user space visible interfaces still support both clocks, but their behavior
is identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165150.315745557@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The planned change to unify the behaviour of the MONOTONIC and BOOTTIME
clocks vs. suspend removes the ability to retrieve the active
non-suspended time of a system.
Provide a new CLOCK_MONOTONIC_ACTIVE clock which returns the active
non-suspended time of the system via clock_gettime().
This preserves the old behaviour of CLOCK_MONOTONIC before the
BOOTTIME/MONOTONIC unification.
This new clock also allows applications to detect programmatically that
the MONOTONIC and BOOTTIME clocks are identical.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20180301165149.965235774@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The function clear_siginfo is just a nice wrapper around memset so
this results in no functional change. This change makes mistakes
a little more difficult and it makes it clearer what is going on.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
timer_create() specifies via sigevent->sigev_notify the signal delivery for
the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD
and (SIGEV_SIGNAL | SIGEV_THREAD_ID).
The sanity check in good_sigevent() is only checking the valid combination
for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is
not set it accepts any random value.
This has no real effects on the posix timer and signal delivery code, but
it affects show_timer() which handles the output of /proc/$PID/timers. That
function uses a string array to pretty print sigev_notify. The access to
that array has no bound checks, so random sigev_notify cause access beyond
the array bounds.
Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID
masking from various code pathes as SIGEV_NONE can never be set in
combination with SIGEV_THREAD_ID.
Reported-by: Eric Biggers <ebiggers3@gmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: stable@vger.kernel.org
Usage of these apis and their compat versions makes
the syscalls: timer_settime and timer_gettime and their
compat implementations simpler.
This patch also serves as a preparatory patch for changing
syscalls to use new time_t data types to support the
y2038 effort by isolating the processing of user pointers
through these apis.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Usage of these apis and their compat versions makes
the syscalls: clock_nanosleep and nanosleep and
their compat implementations simpler.
This is a preparatory patch to isolate data conversions to
struct timespec64 at userspace boundaries. This helps contain
the changes needed to transition to new y2038 safe types.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrei Vagin