When we do IPsec offloading, we need a fallback for
packets that were targeted to be IPsec offloaded but
rerouted to a device that does not support IPsec offload.
For that we add a function that checks the offloading
features of the sending device and and flags the
requirement of a fallback before it calls the IPsec
output function. The IPsec output function adds the IPsec
trailer and does encryption if needed.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.
Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds a gso_segment and xmit callback for the
xfrm_mode and implement these functions for tunnel and
transport mode.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We add a struct xfrm_type_offload so that we have the offloaded
codepath separated to the non offloaded codepath. With this the
non offloade and the offloaded codepath can coexist.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Current addr4_match() code has special test for /0 prefixes because of
standard required undefined behaviour. However, it is possible to omit
it on 64-bit because shifting can be done within a 64-bit register and
then truncated to the expected value (which is 0 mask).
Implicit truncation by htonl() fits nicely into R32-within-R64 model
on x86-64.
Space savings: none (coincidence)
Branch savings: 1
Before:
movzx eax,BYTE PTR [rdi+0x2a] # ->prefixlen_d
test al,al
jne xfrm_selector_match + 0x23f
...
movzx eax,BYTE PTR [rbx+0x2b] # ->prefixlen_s
test al,al
je xfrm_selector_match + 0x1c7
After (no branches):
mov r8d,0x20
mov rdx,0xffffffffffffffff
mov esi,DWORD PTR [rsi+0x2c]
mov ecx,r8d
sub cl,BYTE PTR [rdi+0x2a]
xor esi,DWORD PTR [rbx]
mov rdi,rdx
xor eax,eax
shl rdi,cl
bswap edi
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
x86_64 is zero-extending arch so "unsigned int" is preferred over "int"
for address calculations and extending to size_t.
Space savings:
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-24 (-24)
function old new delta
xfrm_state_walk 708 696 -12
xfrm_selector_match 918 906 -12
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds GRO ifrastructure and callbacks for ESP on
ipv4 and ipv6.
In case the GRO layer detects an ESP packet, the
esp{4,6}_gro_receive() function does a xfrm state lookup
and calls the xfrm input layer if it finds a matching state.
The packet will be decapsulated and reinjected it into layer 2.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need to keep per packet offloading informations across
the layers. So we extend the sec_path to carry these for
the input and output offload codepath.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a new helper to set the secpath to the skb.
This avoids code duplication, as this is used
in multiple places.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Only needed it to register the policy backend at init time.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Just call xfrm_garbage_collect_deferred() directly.
This gets rid of a write to afinfo in register/unregister and allows to
constify afinfo later on.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Nothing checks the return value. Also, the errors returned on unregister
are impossible (we only support INET and INET6, so no way
xfrm_policy_afinfo[afinfo->family] can be anything other than 'afinfo'
itself).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Nothing writes to these structures (the module owner was not used).
While at it, size xfrm_input_afinfo[] by the highest existing xfrm family
(INET6), not AF_MAX.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch tries to avoid skb_cow_data on esp4.
On the encrypt side we add the IPsec tailbits
to the linear part of the buffer if there is
space on it. If there is no space on the linear
part, we add a page fragment with the tailbits to
the buffer and use separate src and dst scatterlists.
On the decrypt side, we leave the buffer as it is
if it is not cloned.
With this, we can avoid a linearization of the buffer
in most of the cases.
Joint work with:
Sowmini Varadhan <sowmini.varadhan@oracle.com>
Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_init_tempstate is always called from within rcu read side section.
We can thus use a simpler function that doesn't call rcu_read_lock
again.
While at it, also make xfrm_init_tempstate return value void, the
return value was never tested.
A followup patch will replace remaining callers of xfrm_state_get_afinfo
with xfrm_state_afinfo_get_rcu variant and then remove the 'old'
get_afinfo interface.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Since commit 1625f45299, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).
XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().
A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Fixes: 1625f45299 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The xfrm_replay structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the old days (before linux-3.0), SNMP counters were duplicated,
one for user context, and one for BH context.
After commit 8f0ea0fe3a ("snmp: reduce percpu needs by 50%")
we have a single copy, and what really matters is preemption being
enabled or disabled, since we use this_cpu_inc() or __this_cpu_inc()
respectively.
We therefore kill SNMP_INC_STATS_USER(), SNMP_ADD_STATS_USER(),
NET_INC_STATS_USER(), NET_ADD_STATS_USER(), SCTP_INC_STATS_USER(),
SNMP_INC_STATS64_USER(), SNMP_ADD_STATS64_USER(), TCP_ADD_STATS_USER(),
UDP_INC_STATS_USER(), UDP6_INC_STATS_USER(), and XFRM_INC_STATS_USER()
Following patches will rename __BH helpers to make clear their
usage is not tied to BH being disabled.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XFRM can deal with SYNACK messages, sent while listener socket
is not locked. We add proper rcu protection to __xfrm_sk_clone_policy()
and xfrm_sk_policy_lookup()
This might serve as the first step to remove xfrm.xfrm_policy_lock
use in fast path.
Fixes: fa76ce7328 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon switch sk->sk_policy[] to RCU protection,
as SYNACK packets are sent while listener socket is not locked.
This patch simply adds RCU grace period before struct xfrm_policy
freeing, and the corresponding rcu_head in struct xfrm_policy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The network namespace is already passed into dst_output pass it into
dst->output lwt->output and friends.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rules can be installed that direct route lookups to specific tables based
on oif. Plumb the oif through the xfrm lookups so it gets set in the flow
struct and passed to the resolver routines.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds IV generator information to xfrm_state. This
is currently obtained from our own list of algorithm descriptions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds IV generator information for each AEAD and block
cipher to xfrm_algo_desc. This will be used to access the new
AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On the output paths in particular, we have to sometimes deal with two
socket contexts. First, and usually skb->sk, is the local socket that
generated the frame.
And second, is potentially the socket used to control a tunneling
socket, such as one the encapsulates using UDP.
We do not want to disassociate skb->sk when encapsulating in order
to fix this, because that would break socket memory accounting.
The most extreme case where this can cause huge problems is an
AF_PACKET socket transmitting over a vxlan device. We hit code
paths doing checks that assume they are dealing with an ipv4
socket, but are actually operating upon the AF_PACKET one.
Signed-off-by: David S. Miller <davem@davemloft.net>
In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and
get rid of the typecasting.
Modifying the uapi header is okay, the union has still the same size.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having to say
> #ifdef CONFIG_NET_NS
> struct net *net;
> #endif
in structures is a little bit wordy and a little bit error prone.
Instead it is possible to say:
> typedef struct {
> #ifdef CONFIG_NET_NS
> struct net *net;
> #endif
> } possible_net_t;
And then in a header say:
> possible_net_t net;
Which is cleaner and easier to use and easier to test, as the
possible_net_t is always there no matter what the compile options.
Further this allows read_pnet and write_pnet to be functions in all
cases which is better at catching typos.
This change adds possible_net_t, updates the definitions of read_pnet
and write_pnet, updates optional struct net * variables that
write_pnet uses on to have the type possible_net_t, and finally fixes
up the b0rked users of read_pnet and write_pnet.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable to specify local and remote prefix length thresholds for the
policy hash table via a netlink XFRM_MSG_NEWSPDINFO message.
prefix length thresholds are specified by XFRMA_SPD_IPV4_HTHRESH and
XFRMA_SPD_IPV6_HTHRESH optional attributes (struct xfrmu_spdhthresh).
example:
struct xfrmu_spdhthresh thresh4 = {
.lbits = 0;
.rbits = 24;
};
struct xfrmu_spdhthresh thresh6 = {
.lbits = 0;
.rbits = 56;
};
struct nlmsghdr *hdr;
struct nl_msg *msg;
msg = nlmsg_alloc();
hdr = nlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, XFRMA_SPD_IPV4_HTHRESH, sizeof(__u32), NLM_F_REQUEST);
nla_put(msg, XFRMA_SPD_IPV4_HTHRESH, sizeof(thresh4), &thresh4);
nla_put(msg, XFRMA_SPD_IPV6_HTHRESH, sizeof(thresh6), &thresh6);
nla_send_auto(sk, msg);
The numbers are the policy selector minimum prefix lengths to put a
policy in the hash table.
- lbits is the local threshold (source address for out policies,
destination address for in and fwd policies).
- rbits is the remote threshold (destination address for out
policies, source address for in and fwd policies).
The default values are:
XFRMA_SPD_IPV4_HTHRESH: 32 32
XFRMA_SPD_IPV6_HTHRESH: 128 128
Dynamic re-building of the SPD is performed when the thresholds values
are changed.
The current thresholds can be read via a XFRM_MSG_GETSPDINFO request:
the kernel replies to XFRM_MSG_GETSPDINFO requests by an
XFRM_MSG_NEWSPDINFO message, with both attributes
XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH.
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit f1370cc4 "xfrm: Remove useless secid field from xfrm_audit." changed
"struct xfrm_audit" to have either
{ audit_get_loginuid(current) / audit_get_sessionid(current) } or
{ INVALID_UID / -1 } pair.
This means that we can represent "struct xfrm_audit" as "bool".
This patch replaces "struct xfrm_audit" argument with "bool".
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It seems to me that commit ab5f5e8b "[XFRM]: xfrm audit calls" is doing
something strange at xfrm_audit_helper_usrinfo().
If secid != 0 && security_secid_to_secctx(secid) != 0, the caller calls
audit_log_task_context() which basically does
secid != 0 && security_secid_to_secctx(secid) == 0 case
except that secid is obtained from current thread's context.
Oh, what happens if secid passed to xfrm_audit_helper_usrinfo() was
obtained from other thread's context? It might audit current thread's
context rather than other thread's context if security_secid_to_secctx()
in xfrm_audit_helper_usrinfo() failed for some reason.
Then, are all the caller of xfrm_audit_helper_usrinfo() passing either
secid obtained from current thread's context or secid == 0?
It seems to me that they are.
If I didn't miss something, we don't need to pass secid to
xfrm_audit_helper_usrinfo() because audit_log_task_context() will
obtain secid from current thread's context.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.
The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.
Fixes: 8f646c922d ("vxlan: keep original skb ownership")
Reported-by: lucien xin <lucien.xin@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
One patch to rename a newly introduced struct. The rest is
the rework of the IPsec virtual tunnel interface for ipv6 to
support inter address family tunneling and namespace crossing.
1) Rename the newly introduced struct xfrm_filter to avoid a
conflict with iproute2. From Nicolas Dichtel.
2) Introduce xfrm_input_afinfo to access the address family
dependent tunnel callback functions properly.
3) Add and use a IPsec protocol multiplexer for ipv6.
4) Remove dst_entry caching. vti can lookup multiple different
dst entries, dependent of the configured xfrm states. Therefore
it does not make to cache a dst_entry.
5) Remove caching of flow informations. vti6 does not use the the
tunnel endpoint addresses to do route and xfrm lookups.
6) Update the vti6 to use its own receive hook.
7) Remove the now unused xfrm_tunnel_notifier. This was used from vti
and is replaced by the IPsec protocol multiplexer hooks.
8) Support inter address family tunneling for vti6.
9) Check if the tunnel endpoints of the xfrm state and the vti interface
are matching and return an error otherwise.
10) Enable namespace crossing for vti devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This was used from vti and is replaced by the IPsec protocol
multiplexer hooks. It is now unused, so remove it.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds an IPsec protocol multiplexer for ipv6. With
this it is possible to add alternative protocol handlers, as
needed for IPsec virtual tunnel interfaces.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
IPv6 can be build as a module, so we need mechanism to access
the address family dependent callback functions properly.
Therefore we introduce xfrm_input_afinfo, similar to that
what we have for the address family dependent part of
policies and states.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
iproute2 already defines a structure with that name, let's use another one to
avoid any conflict.
CC: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Conflicts:
drivers/net/wireless/ath/ath9k/recv.c
drivers/net/wireless/mwifiex/pcie.c
net/ipv6/sit.c
The SIT driver conflict consists of a bug fix being done by hand
in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper
was created (netdev_alloc_pcpu_stats()) which takes care of this.
The two wireless conflicts were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
This was used from vti and is replaced by the IPsec protocol
multiplexer hooks. It is now unused, so remove it.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
IPsec vti_rcv needs to remind the tunnel pointer to
check it later at the vti_rcv_cb callback. So add
this pointer to the IPsec common buffer, initialize
it and check it to avoid transport state matching of
a tunneled packet.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch add an IPsec protocol multiplexer. With this
it is possible to add alternative protocol handlers as
needed for IPsec virtual tunnel interfaces.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We loose a lot of information of the original state if we
clone it with xfrm_state_clone(). In particular, there is
no crypto algorithm attached if the original state uses
an aead algorithm. This patch add the missing information
to the clone state.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The goal of this patch is to allow userland to dump only a part of SA by
specifying a filter during the dump.
The kernel is in charge to filter SA, this avoids to generate useless netlink
traffic (it save also some cpu cycles). This is particularly useful when there
is a big number of SA set on the system.
Note that I removed the union in struct xfrm_state_walk to fix a problem on arm.
struct netlink_callback->args is defined as a array of 6 long and the first long
is used in xfrm code to flag the cb as initialized. Hence, we must have:
sizeof(struct xfrm_state_walk) <= sizeof(long) * 5.
With the union, it was false on arm (sizeof(struct xfrm_state_walk) was
sizeof(long) * 7), due to the padding.
In fact, whatever the arch is, this union seems useless, there will be always
padding after it. Removing it will not increase the size of this struct (and
reduce it on arm).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In the case when KMs have no listeners, km_query() will fail and
temporary SAs are garbage collected immediately after their allocation.
This causes strain on memory allocation, leading even to OOM since
temporary SA alloc/free cycle is performed for every packet
and garbage collection does not keep up the pace.
The sane thing to do is to make sure we have audience before
temporary SA allocation.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert