local_bh_disable() + spin_lock() is equivalent to spin_lock_bh(), same for
the unlock/enable case, so replace the calls by the appropriate wrappers.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS/OVS updates for net-next
The following patchset contains Netfilter/IPVS fixes and OVS NAT
support, more specifically this batch is composed of:
1) Fix a crash in ipset when performing a parallel flush/dump with
set:list type, from Jozsef Kadlecsik.
2) Make sure NFACCT_FILTER_* netlink attributes are in place before
accessing them, from Phil Turnbull.
3) Check return error code from ip_vs_fill_iph_skb_off() in IPVS SIP
helper, from Arnd Bergmann.
4) Add workaround to IPVS to reschedule existing connections to new
destination server by dropping the packet and wait for retransmission
of TCP syn packet, from Julian Anastasov.
5) Allow connection rescheduling in IPVS when in CLOSE state, also
from Julian.
6) Fix wrong offset of SIP Call-ID in IPVS helper, from Marco Angaroni.
7) Validate IPSET_ATTR_ETHER netlink attribute length, from Jozsef.
8) Check match/targetinfo netlink attribute size in nft_compat,
patch from Florian Westphal.
9) Check for integer overflow on 32-bit systems in x_tables, from
Florian Westphal.
Several patches from Jarno Rajahalme to prepare the introduction of
NAT support to OVS based on the Netfilter infrastructure:
10) Schedule IP_CT_NEW_REPLY definition for removal in
nf_conntrack_common.h.
11) Simplify checksumming recalculation in nf_nat.
12) Add comments to the openvswitch conntrack code, from Jarno.
13) Update the CT state key only after successful nf_conntrack_in()
invocation.
14) Find existing conntrack entry after upcall.
15) Handle NF_REPEAT case due to templates in nf_conntrack_in().
16) Call the conntrack helper functions once the conntrack has been
confirmed.
17) And finally, add the NAT interface to OVS.
The batch closes with:
18) Cleanup to use spin_unlock_wait() instead of
spin_lock()/spin_unlock(), from Nicholas Mc Guire.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The spin_lock()/spin_unlock() is synchronizing on the
nf_conntrack_locks_all_lock which is equivalent to
spin_unlock_wait() but the later should be more efficient.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On loaded TCP servers, looking at millions of sockets can hold
cpu for many seconds, if the lookup condition is very narrow.
(eg : ss dst 1.2.3.4 )
Better add a cond_resched() to allow other processes to access
the cpu.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend OVS conntrack interface to cover NAT. New nested
OVS_CT_ATTR_NAT attribute may be used to include NAT with a CT action.
A bare OVS_CT_ATTR_NAT only mangles existing and expected connections.
If OVS_NAT_ATTR_SRC or OVS_NAT_ATTR_DST is included within the nested
attributes, new (non-committed/non-confirmed) connections are mangled
according to the rest of the nested attributes.
The corresponding OVS userspace patch series includes test cases (in
tests/system-traffic.at) that also serve as example uses.
This work extends on a branch by Thomas Graf at
https://github.com/tgraf/ovs/tree/nat.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There is no need to help connections that are not confirmed, so we can
delay helping new connections to the time when they are confirmed.
This change is needed for NAT support, and having this as a separate
patch will make the following NAT patch a bit easier to review.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Repeat the nf_conntrack_in() call when it returns NF_REPEAT. This
avoids dropping a SYN packet re-opening an existing TCP connection.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new function ovs_ct_find_existing() to find an existing
conntrack entry for which this packet was already applied to. This is
only to be called when there is evidence that the packet was already
tracked and committed, but we lost the ct reference due to an
userspace upcall.
ovs_ct_find_existing() is called from skb_nfct_cached(), which can now
hide the fact that the ct reference may have been lost due to an
upcall. This allows ovs_ct_commit() to be simplified.
This patch is needed by later "openvswitch: Interface with NAT" patch,
as we need to be able to pass the packet through NAT using the
original ct reference also after the reference is lost after an
upcall.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only a successful nf_conntrack_in() call can effect a connection state
change, so it suffices to update the key only after the
nf_conntrack_in() returns.
This change is needed for the later NAT patches.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This makes the code easier to understand and the following patches
more focused.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
NAT checksum recalculation code assumes existence of skb_dst, which
becomes a problem for a later patch in the series ("openvswitch:
Interface with NAT."). Simplify this by removing the check on
skb_dst, as the checksum will be dealt with later in the stack.
Suggested-by: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Remove the definition of IP_CT_NEW_REPLY from the kernel as it does
not make sense. This allows the definition of IP_CT_NUMBER to be
simplified as well.
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Rework the netdev event handler, similar to what the Mellanox Spectrum
driver does, to easily welcome more events later (for example
NETDEV_PRECHANGEUPPER) and use netdev helpers (such as
netif_is_bridge_master).
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
netdev_upper_dev_unlink() which notifies NETDEV_CHANGEUPPER, returns
void, as well as del_nbp(). So there's no advantage to catch an eventual
error from the port_bridge_leave routine at the DSA level.
Make this routine void for the DSA layer and its existing drivers.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename DSA port_join_bridge and port_leave_bridge routines to
respectively port_bridge_join and port_bridge_leave in order to respect
an implicit Port::Bridge namespace.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zefir Kurtisi reported kernel panic with an openwrt specific patch.
However, it turns out that mainline has a similar bug waiting to happen.
Once NF_HOOK() returns the skb is in undefined state and must not be
used. Moreover, the okfn must consume the skb to support async
processing (NF_QUEUE).
Current okfn in this spot doesn't consume it and caller assumes that
NF_HOOK return value tells us if skb was freed or not, but thats wrong.
It "works" because no in-tree user registers a NFPROTO_BRIDGE hook at
LOCAL_IN that returns STOLEN or NF_QUEUE verdicts.
Once we add NF_QUEUE support for nftables bridge this will break --
NF_QUEUE holds the skb for async processing, caller will erronoulsy
return RX_HANDLER_PASS and on reinject netfilter will access free'd skb.
Fix this by pushing skb up the stack in the okfn instead.
NB: It also seems dubious to use LOCAL_IN while bypassing PRE_ROUTING
completely in this case but this is how its been forever so it seems
preferable to not change this.
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2016-03-12
Here's the last bluetooth-next pull request for the 4.6 kernel.
- New USB ID for AR3012 in btusb
- New BCM2E55 ACPI ID
- Buffer overflow fix for the Add Advertising command
- Support for a new Bluetooth LE limited privacy mode
- Fix for firmware activation in btmrvl_sdio
- Cleanups to mac802154 & 6lowpan code
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The fixed phys delete function simply removed the fixed phy from the
internal linked list and freed the memory. It however did not
unregister the associated phy device. This meant it was still possible
to find the phy device on the mdio bus.
Make fixed_phy_del() an internal function and add a
fixed_phy_unregister() to unregisters the phy device and then uses
fixed_phy_del() to free resources.
Modify DSA to use this new API function, so we don't leak phys.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
All ports types can have a fixed PHY associated with it. Remove the
check which limits removal to only CPU and DSA ports.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phy is disconnected from the slave in dsa_slave_destroy(). Don't
destroy fixed link phys until after this, since there can be fixed
linked phys connected to ports.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the phy is disconnected, the parent pointer to the netdev it was
attached to is set to NULL. The code then tries to suspend the phy,
but dsa_slave_fixed_link_update needs the parent pointer to determine
which switch the phy is connected to. So it dereferenced a NULL
pointer. Check for this condition.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per RFC4898, they count segments sent/received
containing a positive length data segment (that includes
retransmission segments carrying data). Unlike
tcpi_segs_out/in, tcpi_data_segs_out/in excludes segments
carrying no data (e.g. pure ack).
The patch also updates the segs_in in tcp_fastopen_add_skb()
so that segs_in >= data_segs_in property is kept.
Together with retransmission data, tcpi_data_segs_out
gives a better signal on the rxmit rate.
v6: Rebase on the latest net-next
v5: Eric pointed out that checking skb->len is still needed in
tcp_fastopen_add_skb() because skb can carry a FIN without data.
Hence, instead of open coding segs_in and data_segs_in, tcp_segs_in()
helper is used. Comment is added to the fastopen case to explain why
segs_in has to be reset and tcp_segs_in() has to be called before
__skb_pull().
v4: Add comment to the changes in tcp_fastopen_add_skb()
and also add remark on this case in the commit message.
v3: Add const modifier to the skb parameter in tcp_segs_in()
v2: Rework based on recent fix by Eric:
commit a9d99ce28e ("tcp: fix tcpi_segs_in after connection establishment")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Chris Rapier <rapier@psc.edu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc points out code that is not indented the way it is
interpreted:
net/caif/cfpkt_skbuff.c: In function 'cfpkt_setlen':
net/caif/cfpkt_skbuff.c:289:4: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation]
return cfpkt_getlen(pkt);
^~~~~~
net/caif/cfpkt_skbuff.c:286:3: note: ...this 'else' clause, but it is not
else
^~~~
It is clear from the context that not returning here would be
a bug, as we'd end up passing a negative length into a function
that takes a u16 length, so it is not missing curly braces
here, and I'm assuming that the indentation is the only part
that's wrong about it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The syzkaller fuzzer hit the following use-after-free:
Call Trace:
[<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295
[<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261
[< inline >] SYSC_recvmmsg net/socket.c:2281
[<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270
[<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a
arch/x86/entry/entry_64.S:185
And, as Dmitry rightly assessed, that is because we can drop the
reference and then touch it when the underlying recvmsg calls return
some packets and then hit an error, which will make recvmmsg to set
sock->sk->sk_err, oops, fix it.
Reported-and-Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Fixes: a2e2725541 ("net: Introduce recvmmsg socket syscall")
http://lkml.kernel.org/r/20160122211644.GC2470@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand headroom further in order to be able to fit the larger IPv6
header. Prior to this patch this caused a skb under panic for certain
tipc packets when using IPv6 UDP bearer(s).
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This basic implementation allows to share code between driver using
hardware buffer management. As the code is hardware agnostic, there is
few helpers, most of the optimization brought by the an HW BM has to be
done at driver level.
Tested-by: Sebastian Careba <nitroshift@yahoo.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible for tunnels to end up generating IP or IPv6 datagrams that
are larger than 64K and expecting to be segmented. As such we need to deal
with length values greater than 64K. In order to accommodate this we need
to update the code to work with a 32b length value instead of a 16b one.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates csum_ipv6_magic so that it correctly recognizes that
protocol is a unsigned 8 bit value.
This will allow us to better understand what limitations may or may not be
present in how we handle the data. For example there are a number of
places that call htonl on the protocol value. This is likely not necessary
and can be replaced with a multiplication by ntohl(1) which will be
converted to a shift by the compiler.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an inetdev is destroyed, every address assigned to the interface
is removed. And in this scenerio we do two pointless things which can
be very expensive if the number of assigned interfaces is large:
1) Address promotion. We are deleting all addresses, so there is no
point in doing this.
2) A full nf conntrack table purge for every address. We only need to
do this once, as is already caught by the existing
masq_dev_notifier so masq_inet_event() can skip this.
Reported-by: Solar Designer <solar@openwall.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
This is a very small one this time, with only 5 patches.
There are a couple of big items that could not be merged/finished
on time.
We have:
- 2 LLCP fixes for a race and a potential OOM.
- 2 cleanups for the pn544 and microread drivers.
- 1 Maintainer addition for the s3fwrn5 driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W1gM
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.6 pull request
This is a very small one this time, with only 5 patches.
There are a couple of big items that could not be merged/finished
on time.
We have:
- 2 LLCP fixes for a race and a potential OOM.
- 2 cleanups for the pn544 and microread drivers.
- 1 Maintainer addition for the s3fwrn5 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to use the static variable here, pr_info_once is more
concise.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some drivers reuse/share code paths that free SKBs between NAPI
and non-NAPI calls. Adjust napi_consume_skb to handle this
use-case.
Before, calls from netpoll (w/ IRQs disabled) was handled and
indicated with a budget zero indication. Use the same zero
indication to handle calls not originating from NAPI/softirq.
Simply handled by using dev_consume_skb_any().
This adds an extra branch+call for the netpoll case (checking
in_irq() + irqs_disabled()), but that is okay as this is a slowpath.
Suggested-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently sctp_sendmsg() triggers some calls that will allocate memory
with GFP_ATOMIC even when not necessary. In the case of
sctp_packet_transmit it will allocate a linear skb that will be used to
construct the packet and this may cause sends to fail due to ENOMEM more
often than anticipated specially with big MTUs.
This patch thus allows it to inherit gfp flags from upper calls so that
it can use GFP_KERNEL if it was triggered by a sctp_sendmsg call or
similar. All others, like retransmits or flushes started from BH, are
still allocated using GFP_ATOMIC.
In netperf tests this didn't result in any performance drawbacks when
memory is not too fragmented and made it trigger ENOMEM way less often.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we want to change a flow using netlink, we have to identify it to
be able to perform a lookup. Both the flow key and unique flow ID
(ufid) are valid identifiers, but we always have to specify the flow
key in the netlink message. When both attributes are there, the ufid
is used. The flow key is used to validate the actions provided by
the userland.
This commit allows to use the ufid without having to provide the flow
key, as it is already done in the netlink 'flow get' and 'flow del'
path. The flow key remains mandatory when an action is provided.
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds macro NETCONFA_ALL to represent all type of netconf
attributes for IPv4 and IPv6.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
prior to this patch, at the beginning if we have two paths in one assoc,
they may have the same params other than the last_time_heard, it will try
the paths like this:
1st cycle
try trans1 fail.
then trans2 is selected.(cause it's last_time_heard is after trans1).
2nd cycle:
try trans2 fail
then trans2 is selected.(cause it's last_time_heard is after trans1).
3rd cycle:
try trans2 fail
then trans2 is selected.(cause it's last_time_heard is after trans1).
....
trans1 will never have change to be selected, which is not what we expect.
we should keeping round robin all the paths if they are just added at the
beginning.
So at first every tranport's last_time_heard should be initialized 0, so
that we ensure they have the same value at the beginning, only by this,
all the transports could get equal chance to be selected.
Then for sctp_trans_elect_best, it should return the trans_next one when
*trans == *trans_next, so that we can try next if it fails, but now it
always return trans. so we can fix it by exchanging these two params when
we calls sctp_trans_elect_tie().
Fixes: 4c47af4d5e ('net: sctp: rework multihoming retransmission path selection to rfc4960')
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace all "unsigned" types with "unsigned int" types.
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates the GRO handlers for GRE, VXLAN, GENEVE, and FOU so that
we do not clear the flush bit until after we have called the next level GRO
handler. Previously this was being cleared before parsing through the list
of frames, however this resulted in several paths where either the bit
needed to be reset but wasn't as in the case of FOU, or cases where it was
being set as in GENEVE. By just deferring the clearing of the bit until
after the next level protocol has been parsed we can avoid any unnecessary
bit twiddling and avoid bugs.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ben Hawkes says:
integer overflow in xt_alloc_table_info, which on 32-bit systems can
lead to small structure allocation and a copy_from_user based heap
corruption.
Reported-by: Ben Hawkes <hawkes@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch extends bpf_tunnel_key with a tunnel_label member, that maps
to ip_tunnel_key's label so underlying backends like vxlan and geneve
can propagate the label to udp_tunnel6_xmit_skb(), where it's being set
in the IPv6 header. It allows for having 20 more bits to encode/decode
flow related meta information programmatically. Tested with vxlan and
geneve.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch extends udp_tunnel6_xmit_skb() to pass in the IPv6 flow label
from call sites. Currently, there's no such option and it's always set to
zero when writing ip6_flow_hdr(). Add a label member to ip_tunnel_key, so
that flow-based tunnels via collect metadata frontends can make use of it.
vxlan and geneve will be converted to add flow label support separately.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a regression in the bridge ageing time caused by:
commit c62987bbd8 ("bridge: push bridge setting ageing_time down to switchdev")
There are users of Linux bridge which use the feature that if ageing time
is set to 0 it causes entries to never expire. See:
https://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
For a pure software bridge, it is unnecessary for the code to have
arbitrary restrictions on what values are allowable.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cast pointer to unsigned long instead of u64, to fix compilation warning
on 32 bit arch, spotted by 0day build.
Fixes: 5b33f48 ("net/flower: Introduce hardware offload support")
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Add Advertising command handler does the appropriate checks for
the AD and Scan Response data, however fails to take into account the
general length of the mgmt command itself, which could lead to
potential buffer overflows. This patch adds the necessary check that
the mgmt command length is consistent with the given ad and scan_rsp
lengths.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
A recent change added MGMT_ADV_FLAG_DISCOV to the flags returned by
get_adv_instance_flags(), however failed to take into account limited
discoverable mode. This patch fixes the issue by setting the correct
discoverability flag in the AD data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We copy according to ->target|matchsize, so check that the netlink attribute
(which can include padding and might be larger) contains enough data.
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Simon Horman says:
====================
please consider these IPVS fixes for v4.5 or
if it is too late please consider them for v4.6.
* Arnd Bergman has corrected an error whereby the SIP persistence engine
may incorrectly access protocol fields
* Julian Anastasov has corrected a problem reported by Jiri Bohac with the
connection rescheduling mechanism added in 3.10 when new SYNs in
connection to dead real server can be redirected to another real server.
* Marco Angaroni resolved a problem in the SIP persistence engine
whereby the Call-ID could not be found if it was at the beginning of a
SIP message.
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Will be used in a following patch to query if a key is being used, and
what it's value in the target object.
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is based on a patch made by John Fastabend.
It adds support for offloading cls_flower.
when NETIF_F_HW_TC is on:
flags = 0 => Rule will be processed twice - by hardware, and if
still relevant, by software.
flags = SKIP_HW => Rull will be processed by software only
If hardware fail/not capabale to apply the rule, operation will NOT
fail. Filter will be processed by SW only.
Acked-by: Jiri Pirko <jiri@mellanox.com>
Suggested-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Amir Vadai <amir@vadai.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial commit badly merged into the dsa_resume method instead
of the dsa_remove_dst method.
As consequence, the dst->master_netdev->dsa_ptr is not set to NULL on
removal and re-bind of the dsa device fails with error -17.
Fixes: b0dc635d92 ("net: dsa: cleanup resources upon module removal ")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicholas Mc Guire