Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
kmap() in page_follow_link_light() needed to go - allowing to hold
an arbitrary number of kmaps for long is a great way to deadlocking
the system.
new helper (inode_nohighmem(inode)) needs to be used for pagecache
symlinks inodes; done for all in-tree cases. page_follow_link_light()
instrumented to yell about anything missed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make DAX fault path use pre-zeroed blocks to avoid races with extent
conversion and zeroing when two page faults to the same block happen.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
DAX page fault path needs to get blocks that are pre-zeroed to avoid
races when two concurrent page faults happen in the same block of a
file. Implement support for this in ext4_map_blocks().
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Create new function ext4_issue_zeroout() to zeroout contiguous (both
logically and physically) part of inode data. We will need to issue
zeroout when extent structure is not readily available and this function
will allow us to do it without making up fake extent structures.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When dioread_nolock mode is enabled, we grab i_data_sem in
ext4_ext_direct_IO() and therefore we need to instruct _ext4_get_block()
not to grab i_data_sem again using EXT4_GET_BLOCKS_NO_LOCK. However
holding i_data_sem over overwrite direct IO isn't needed these days. We
have exclusion against truncate / hole punching because we increase
i_dio_count under i_mutex in ext4_ext_direct_IO() so once
ext4_file_write_iter() verifies blocks are allocated & written, they are
guaranteed to stay so during the whole direct IO even after we drop
i_mutex.
So we can just remove this locking abuse and the no longer necessary
EXT4_GET_BLOCKS_NO_LOCK flag.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When doing delayed allocation, update of on-disk inode size is postponed
until IO submission time. However hole punch or zero range fallocate
calls can end up discarding the tail page cache page and thus on-disk
inode size would never be properly updated.
Make sure the on-disk inode size is updated before truncating page
cache.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, page faults and hole punching are completely unsynchronized.
This can result in page fault faulting in a page into a range that we
are punching after truncate_pagecache_range() has been called and thus
we can end up with a page mapped to disk blocks that will be shortly
freed. Filesystem corruption will shortly follow. Note that the same
race is avoided for truncate by checking page fault offset against
i_size but there isn't similar mechanism available for punching holes.
Fix the problem by creating new rw semaphore i_mmap_sem in inode and
grab it for writing over truncate, hole punching, and other functions
removing blocks from extent tree and for read over page faults. We
cannot easily use i_data_sem for this since that ranks below transaction
start and we need something ranking above it so that it can be held over
the whole truncate / hole punching operation. Also remove various
workarounds we had in the code to reduce race window when page fault
could have created pages with stale mapping information.
Signed-off-by: Jan Kara <jack@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The function currently called "__block_page_mkwrite()" used to be called
"block_page_mkwrite()" until a wrapper for this function was added by:
commit 24da4fab5a ("vfs: Create __block_page_mkwrite() helper passing
error values back")
This wrapper, the current "block_page_mkwrite()", is currently unused.
__block_page_mkwrite() is used directly by ext4, nilfs2 and xfs.
Remove the unused wrapper, rename __block_page_mkwrite() back to
block_page_mkwrite() and update the comment above block_page_mkwrite().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge second patch-bomb from Andrew Morton:
- most of the rest of MM
- procfs
- lib/ updates
- printk updates
- bitops infrastructure tweaks
- checkpatch updates
- nilfs2 update
- signals
- various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
dma-debug, dma-mapping, ...
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
ipc,msg: drop dst nil validation in copy_msg
include/linux/zutil.h: fix usage example of zlib_adler32()
panic: release stale console lock to always get the logbuf printed out
dma-debug: check nents in dma_sync_sg*
dma-mapping: tidy up dma_parms default handling
pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
kexec: use file name as the output message prefix
fs, seqfile: always allow oom killer
seq_file: reuse string_escape_str()
fs/seq_file: use seq_* helpers in seq_hex_dump()
coredump: change zap_threads() and zap_process() to use for_each_thread()
coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
signals: kill block_all_signals() and unblock_all_signals()
nilfs2: fix gcc uninitialized-variable warnings in powerpc build
nilfs2: fix gcc unused-but-set-variable warnings
MAINTAINERS: nilfs2: add header file for tracing
nilfs2: add tracepoints for analyzing reading and writing metadata files
...
There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.
Let's introduce a helper function which makes the restriction explicit and
easier to track. This patch doesn't introduce any functional changes.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create separate predicate functions to test/set/clear feature flags,
thereby replacing the wordy old macros. Furthermore, clean out the
places where we open-coded feature tests.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of overloading EIO for CRC errors and corrupt structures,
return the same error codes that XFS returns for the same issues.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there is a error while copying data from userspace into the page
cache during a write(2) system call, in data=journal mode, in
ext4_journalled_write_end() were using page_zero_new_buffers() from
fs/buffer.c. Unfortunately, this sets the buffer dirty flag, which is
no good if journalling is enabled. This is a long-standing bug that
goes back for years and years in ext3, but a combination of (a)
data=journal not being very common, (b) in many case it only results
in a warning message. and (c) only very rarely causes the kernel hang,
means that we only really noticed this as a problem when commit
998ef75ddb caused this failure to happen frequently enough to cause
generic/208 to fail when run in data=journal mode.
The fix is to have our own version of this function that doesn't call
mark_dirty_buffer(), since we will end up calling
ext4_handle_dirty_metadata() on the buffer head(s) in questions very
shortly afterwards in ext4_journalled_write_end().
Thanks to Dave Hansen and Linus Torvalds for helping to identify the
root cause of the problem.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.com>
Since ext4_page_crypto() doesn't need an encryption context (at least
not any more), this allows us to simplify a number function signature
and also allows us to avoid needing to allocate a context in
ext4_block_write_begin(). It also means we no longer need a separate
ext4_decrypt_one() function.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In cases where the file system block size is the same as the page
size, and ext4_writepage() is asked to write out a page which is
either has the unwritten bit set in the extent tree, or which does not
yet have a block assigned due to delayed allocation, we can bail out
early and, unlocking the page earlier and avoiding a round trip
through ext4_bio_write_page() with the attendant calls to
set_page_writeback() and redirty_page_for_writeback().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
DAX wants different semantics from any currently-existing ext4 get_block
callback. Unlike ext4_get_block_write(), it needs to honour the
'create' flag, and unlike ext4_get_block(), it needs to be able to
return unwritten extents. So introduce a new ext4_get_block_dax() which
has those semantics.
We could also change ext4_get_block_write() to honour the 'create' flag,
but that might have consequences on other users that I do not currently
understand.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to handle the !CONFIG_TRANSPARENT_HUGEPAGES case, we need to
return VM_FAULT_FALLBACK from the inlined dax_pmd_fault(), which is
defined in linux/mm.h. Given that we don't want to include <linux/mm.h>
in <linux/fs.h>, the easiest solution is to move the DAX-related
functions to a new header, <linux/dax.h>. We could also have moved
VM_FAULT_* definitions to a new header, or a different header that isn't
quite such a boil-the-ocean header as <linux/mm.h>, but this felt like
the best option.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
features and other churn going into 4.2.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV55TlAAoJEPL5WVaVDYGjyzYH/1WtZpIzRjp7o+3H4/vFqONg
R1Fsw785C1w8WX2QuIK/m31u4XO+VeCV4jWA9DuqnSzWm9w9C/4kTqITd4Hwp416
/9gJvYoZHHaDikxpWWADptDi8IoLohTlcFVCHIvvf53cGehVEEsc2WOijUZo7Cgv
O454Nm3tK0CQ3yrCIlf5SyvkUZSMTiawLLJJzd4GCyvU13C1SnABNQj8UxKisBA5
cP8q4O2nPg/S9rkYxnFAifQyZppd3jMvorUaq9eHiWMjl95o6e/6+wYGnHhoFUvr
/P1dNjJYbzk+TUzlsDkq2zANK2UsB3iNNi8YwLFOpfFcuYopmUAYRIWOgIZWYUQ=
=ijuI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Pretty much all bug fixes and clean ups for 4.3, after a lot of
features and other churn going into 4.2"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Revert "ext4: remove block_device_ejected"
ext4: ratelimit the file system mounted message
ext4: silence a format string false positive
ext4: simplify some code in read_mmp_block()
ext4: don't manipulate recovery flag when freezing no-journal fs
jbd2: limit number of reserved credits
ext4 crypto: remove duplicate header file
ext4: update c/mtime on truncate up
jbd2: avoid infinite loop when destroying aborted journal
ext4, jbd2: add REQ_FUA flag when recording an error in the superblock
ext4 crypto: fix spelling typo in comment
ext4 crypto: exit cleanly if ext4_derive_key_aes() fails
ext4: reject journal options for ext2 mounts
ext4: implement cgroup writeback support
ext4: replace ext4_io_submit->io_op with ->io_wbc
ext4 crypto: check for too-short encrypted file names
ext4 crypto: use a jbd2 transaction when adding a crypto policy
jbd2: speedup jbd2_journal_dirty_metadata()
Commit 3da40c7b08 ("ext4: only call ext4_truncate when size <= isize")
introduced a bug that c/mtime is not updated on truncate up.
Fix the issue by setting c/mtime explicitly in the truncate up case.
Note that ftruncate(2) is not affected, so you won't see this bug using
truncate(1) and xfs_io(1).
Signed-off-by: Zirong Lang <zorro.lang@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* address corner cases for indirect blocks->extent migration
* fix reserved block accounting invalidate_page when
page_size != block_size (i.e., ppc or 1k block size file systems)
* fix deadlocks when a memcg is under heavy memory pressure
* fix fencepost error in lazytime optimization
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVmW27AAoJEPL5WVaVDYGjmEkIAJsGHVIKur1Kp//FhejSB/wI
B0d+UuQt5kdAE3lNxC7lHO1NqIhvnS7eBho+52LG8V4JDRrzTbE1GdbsBhAIk6FW
CcsQvsHAI99QJMdqOCachu/+nhCwIINGkxmbumhNaZoJPn6wmGQzCA3Cn5qmnGnK
Ctbk6li1HuMXyzbbvxCLfaD/xCUs1NCdufEnRU44i0U4OfaYNpiAhddeGIQ8WMEQ
G14l2JvhIfye6fG8lnCzfacFvnT9zvvSGfRO3ZQjC4Az1EogIUbhCPLvq0ebDbPp
i4eRfrSRdXmMojqmW/knET8skXQVZVnD7LWuvkue+n47UbTH2c0roTbp4l76W+U=
=x8Cc
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes (all for stable kernels) for ext4:
- address corner cases for indirect blocks->extent migration
- fix reserved block accounting invalidate_page when
page_size != block_size (i.e., ppc or 1k block size file systems)
- fix deadlocks when a memcg is under heavy memory pressure
- fix fencepost error in lazytime optimization"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: replace open coded nofail allocation in ext4_free_blocks()
ext4: correctly migrate a file with a hole at the beginning
ext4: be more strict when migrating to non-extent based file
ext4: fix reservation release on invalidatepage for delalloc fs
ext4: avoid deadlocks in the writeback path by using sb_getblk_gfp
bufferhead: Add _gfp version for sb_getblk()
ext4: fix fencepost error in lazytime optimization
On delalloc enabled file system on invalidatepage operation
in ext4_da_page_release_reservation() we want to clear the delayed
buffer and remove the extent covering the delayed buffer from the extent
status tree.
However currently there is a bug where on the systems with page size >
block size we will always remove extents from the start of the page
regardless where the actual delayed buffers are positioned in the page.
This leads to the errors like this:
EXT4-fs warning (device loop0): ext4_da_release_space:1225:
ext4_da_release_space: ino 13, to_free 1 with only 0 reserved data
blocks
This however can cause data loss on writeback time if the file system is
in ENOSPC condition because we're releasing reservation for someones
else delayed buffer.
Fix this by only removing extents that corresponds to the part of the
page we want to invalidate.
This problem is reproducible by the following fio receipt (however I was
only able to reproduce it with fio-2.1 or older.
[global]
bs=8k
iodepth=1024
iodepth_batch=60
randrepeat=1
size=1m
directory=/mnt/test
numjobs=20
[job1]
ioengine=sync
bs=1k
direct=1
rw=randread
filename=file1:file2
[job2]
ioengine=libaio
rw=randwrite
direct=1
filename=file1:file2
[job3]
bs=1k
ioengine=posixaio
rw=randwrite
direct=1
filename=file1:file2
[job5]
bs=1k
ioengine=sync
rw=randread
filename=file1:file2
[job7]
ioengine=libaio
rw=randwrite
filename=file1:file2
[job8]
ioengine=posixaio
rw=randwrite
filename=file1:file2
[job10]
ioengine=mmap
rw=randwrite
bs=1k
filename=file1:file2
[job11]
ioengine=mmap
rw=randwrite
direct=1
filename=file1:file2
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Commit 8f4d8558391: "ext4: fix lazytime optimization" was not a
complete fix. In the case where the inode number is a multiple of 16,
and we could still end up updating an inode with dirty timestamps
written to the wrong inode on disk. Oops.
This can be easily reproduced by using generic/005 with a file system
with metadata_csum and lazytime enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
This update contains:
o A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
o DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
o transaction commit interface cleanup
o removal of various unnecessary XFS specific type definitions
o cleanup and optimisation of freelist preparation before allocation
o various minor cleanups
o bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=3x+W
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pul xfs updates from Dave Chinner:
"There's a couple of small API changes to the core DAX code which
required small changes to the ext2 and ext4 code bases, but otherwise
everything is within the XFS codebase.
This update contains:
- A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
- DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
- transaction commit interface cleanup
- removal of various unnecessary XFS specific type definitions
- cleanup and optimisation of freelist preparation before allocation
- various minor cleanups
- bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues"
* tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
xfs: don't truncate attribute extents if no extents exist
xfs: clean up XFS_MIN_FREELIST macros
xfs: sanitise error handling in xfs_alloc_fix_freelist
xfs: factor out free space extent length check
xfs: xfs_alloc_fix_freelist() can use incore perag structures
xfs: remove xfs_caddr_t
xfs: use void pointers in log validation helpers
xfs: return a void pointer from xfs_buf_offset
xfs: remove inst_t
xfs: remove __psint_t and __psunsigned_t
xfs: fix remote symlinks on V5/CRC filesystems
xfs: fix xfs_log_done interface
xfs: saner xfs_trans_commit interface
xfs: remove the flags argument to xfs_trans_cancel
xfs: pass a boolean flag to xfs_trans_free_items
xfs: switch remaining xfs_trans_dup users to xfs_trans_roll
xfs: check min blks for random debug mode sparse allocations
xfs: fix sparse inodes 32-bit compile failure
xfs: add initial DAX support
xfs: add DAX IO path support
...
the ext4 encryption patches, which is a new feature added in the last
merge window. Also fix a number of long-standing xfstest failures.
(Quota writes failing due to ENOSPC, a race between truncate and
writepage in data=journalled mode that was causing generic/068 to
fail, and other corner cases.)
Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
performance eliminating locking when a buffer is modified more than
once during a transaction (which is very common for allocation
bitmaps, for example), in which case the state of the journalled
buffer head doesn't need to change.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVi3PeAAoJEPL5WVaVDYGj+I0H/jRPexvyvnGfxiqs1sxIlbSk
cwewFJSsuKsy/pGYdmHvozWZyWGGORc89NrxoNwdbG+axvHbgUWt/3+vF+rzmaek
vX4v9QvCEo4PfpRgzbnYJFhbxGMJtwci887sq1o/UoNXikFYT2kz8rpdf0++eO5W
/GJNRA5ZUY0L0eeloUILAMrBr7KjtkI2oXwOZt5q68jh7B3n3XdNQXyEiQS/28aK
QYcFrqA/e2Fiuk6l5OSGBCP38mySu+x0nBTLT5LFwwrUBnoZvGtdjM6Sj/yADDDn
uP/Zpq56aLzkFRwwItrDaF26BIf2MhIH/WUYs65CraEGxjMaiPuzAudGA/iUVL8=
=1BdR
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A very large number of cleanups and bug fixes --- in particular for
the ext4 encryption patches, which is a new feature added in the last
merge window. Also fix a number of long-standing xfstest failures.
(Quota writes failing due to ENOSPC, a race between truncate and
writepage in data=journalled mode that was causing generic/068 to
fail, and other corner cases.)
Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
performance eliminating locking when a buffer is modified more than
once during a transaction (which is very common for allocation
bitmaps, for example), in which case the state of the journalled
buffer head doesn't need to change"
[ I renamed "ext4_follow_link()" to "ext4_encrypted_follow_link()" in
the merge resolution, to make it clear that that function is _only_
used for encrypted symlinks. The function doesn't actually work for
non-encrypted symlinks at all, and they use the generic helpers
- Linus ]
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (52 commits)
ext4: set lazytime on remount if MS_LAZYTIME is set by mount
ext4: only call ext4_truncate when size <= isize
ext4: make online defrag error reporting consistent
ext4: minor cleanup of ext4_da_reserve_space()
ext4: don't retry file block mapping on bigalloc fs with non-extent file
ext4: prevent ext4_quota_write() from failing due to ENOSPC
ext4: call sync_blockdev() before invalidate_bdev() in put_super()
jbd2: speedup jbd2_journal_dirty_metadata()
jbd2: get rid of open coded allocation retry loop
ext4: improve warning directory handling messages
jbd2: fix ocfs2 corrupt when updating journal superblock fails
ext4: mballoc: avoid 20-argument function call
ext4: wait for existing dio workers in ext4_alloc_file_blocks()
ext4: recalculate journal credits as inode depth changes
jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()
ext4: use swap() in mext_page_double_lock()
ext4: use swap() in memswap()
ext4: fix race between truncate and __ext4_journalled_writepage()
ext4 crypto: fail the mount if blocksize != pagesize
ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate
...
Pull vfs updates from Al Viro:
"In this pile: pathname resolution rewrite.
- recursion in link_path_walk() is gone.
- nesting limits on symlinks are gone (the only limit remaining is
that the total amount of symlinks is no more than 40, no matter how
nested).
- "fast" (inline) symlinks are handled without leaving rcuwalk mode.
- stack footprint (independent of the nesting) is below kilobyte now,
about on par with what it used to be with one level of nested
symlinks and ~2.8 times lower than it used to be in the worst case.
- struct nameidata is entirely private to fs/namei.c now (not even
opaque pointers are being passed around).
- ->follow_link() and ->put_link() calling conventions had been
changed; all in-tree filesystems converted, out-of-tree should be
able to follow reasonably easily.
For out-of-tree conversions, see Documentation/filesystems/porting
for details (and in-tree filesystems for examples of conversion).
That has sat in -next since mid-May, seems to survive all testing
without regressions and merges clean with v4.1"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits)
turn user_{path_at,path,lpath,path_dir}() into static inlines
namei: move saved_nd pointer into struct nameidata
inline user_path_create()
inline user_path_parent()
namei: trim do_last() arguments
namei: stash dfd and name into nameidata
namei: fold path_cleanup() into terminate_walk()
namei: saner calling conventions for filename_parentat()
namei: saner calling conventions for filename_create()
namei: shift nameidata down into filename_parentat()
namei: make filename_lookup() reject ERR_PTR() passed as name
namei: shift nameidata inside filename_lookup()
namei: move putname() call into filename_lookup()
namei: pass the struct path to store the result down into path_lookupat()
namei: uninline set_root{,_rcu}()
namei: be careful with mountpoint crossings in follow_dotdot_rcu()
Documentation: remove outdated information from automount-support.txt
get rid of assorted nameidata-related debris
lustre: kill unused helper
lustre: kill unused macro (LOOKUP_CONTINUE)
...
At LSF we decided that if we truncate up from isize we shouldn't trim
fallocated blocks that were fallocated with KEEP_SIZE and are past the
new i_size. This patch fixes ext4 to do this.
[ Completely reworked patch so that i_disksize would actually get set
when truncating up. Also reworked the code for handling truncate so
that it's easier to handle. -- tytso ]
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Remove outdated comments and dead code from ext4_da_reserve_space.
Clean up its trace point, and relocate it to make it more useful.
While we're at it, fix a nearby conditional used to determine if
we have a non-bigalloc file system. It doesn't match usage elsewhere
in the code, and misleadingly suggests that an s_cluster_ratio value
of 0 would be legal.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In order to prevent quota block tracking to be inaccurate when
ext4_quota_write() fails with ENOSPC, we make two changes. The quota
file can now use the reserved block (since the quota file is arguably
file system metadata), and ext4_quota_write() now uses
ext4_should_retry_alloc() to retry the block allocation after a commit
has completed and released some blocks for allocation.
This fixes failures of xfstests generic/270:
Quota error (device vdc): write_blk: dquota write failed
Quota error (device vdc): qtree_write_dquot: Error -28 occurred while creating quota
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The commit cf108bca465d: "ext4: Invert the locking order of page_lock
and transaction start" caused __ext4_journalled_writepage() to drop
the page lock before the page was written back, as part of changing
the locking order to jbd2_journal_start -> page_lock. However, this
introduced a potential race if there was a truncate racing with the
data=journalled writeback mode.
Fix this by grabbing the page lock after starting the journal handle,
and then checking to see if page had gotten truncated out from under
us.
This fixes a number of different warnings or BUG_ON's when running
xfstests generic/086 in data=journalled mode, including:
jbd2_journal_dirty_metadata: vdc-8: bad jh for block 115643: transaction (ee3fe7
c0, 164), jh->b_transaction ( (null), 0), jh->b_next_transaction ( (null), 0), jlist 0
- and -
kernel BUG at /usr/projects/linux/ext4/fs/jbd2/transaction.c:2200!
...
Call Trace:
[<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117
[<c02b2de5>] __ext4_journalled_invalidatepage+0x10f/0x117
[<c02b2ded>] ? __ext4_journalled_invalidatepage+0x117/0x117
[<c027d883>] ? lock_buffer+0x36/0x36
[<c02b2dfa>] ext4_journalled_invalidatepage+0xd/0x22
[<c0229139>] do_invalidatepage+0x22/0x26
[<c0229198>] truncate_inode_page+0x5b/0x85
[<c022934b>] truncate_inode_pages_range+0x156/0x38c
[<c0229592>] truncate_inode_pages+0x11/0x15
[<c022962d>] truncate_pagecache+0x55/0x71
[<c02b913b>] ext4_setattr+0x4a9/0x560
[<c01ca542>] ? current_kernel_time+0x10/0x44
[<c026c4d8>] notify_change+0x1c7/0x2be
[<c0256a00>] do_truncate+0x65/0x85
[<c0226f31>] ? file_ra_state_init+0x12/0x29
- and -
WARNING: CPU: 1 PID: 1331 at /usr/projects/linux/ext4/fs/jbd2/transaction.c:1396
irty_metadata+0x14a/0x1ae()
...
Call Trace:
[<c01b879f>] ? console_unlock+0x3a1/0x3ce
[<c082cbb4>] dump_stack+0x48/0x60
[<c0178b65>] warn_slowpath_common+0x89/0xa0
[<c02ef2cf>] ? jbd2_journal_dirty_metadata+0x14a/0x1ae
[<c0178bef>] warn_slowpath_null+0x14/0x18
[<c02ef2cf>] jbd2_journal_dirty_metadata+0x14a/0x1ae
[<c02d8615>] __ext4_handle_dirty_metadata+0xd4/0x19d
[<c02b2f44>] write_end_fn+0x40/0x53
[<c02b4a16>] ext4_walk_page_buffers+0x4e/0x6a
[<c02b59e7>] ext4_writepage+0x354/0x3b8
[<c02b2f04>] ? mpage_release_unused_pages+0xd4/0xd4
[<c02b1b21>] ? wait_on_buffer+0x2c/0x2c
[<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8
[<c02b5a5b>] __writepage+0x10/0x2e
[<c0225956>] write_cache_pages+0x22d/0x32c
[<c02b5a4b>] ? ext4_writepage+0x3b8/0x3b8
[<c02b6ee8>] ext4_writepages+0x102/0x607
[<c019adfe>] ? sched_clock_local+0x10/0x10e
[<c01a8a7c>] ? __lock_is_held+0x2e/0x44
[<c01a8ad5>] ? lock_is_held+0x43/0x51
[<c0226dff>] do_writepages+0x1c/0x29
[<c0276bed>] __writeback_single_inode+0xc3/0x545
[<c0277c07>] writeback_sb_inodes+0x21f/0x36d
...
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
dax_fault() currently relies on the get_block callback to attach an
io completion callback to the mapping buffer head so that it can
run unwritten extent conversion after zeroing allocated blocks.
Instead of this hack, pass the conversion callback directly into
dax_fault() similar to the get_block callback. When the filesystem
allocates unwritten extents, it will set the buffer_unwritten()
flag, and hence the dax_fault code can call the completion function
in the contexts where it is necessary without overloading the
mapping buffer head.
Note: The changes to ext4 to use this interface are suspect at best.
In fact, the way ext4 did this end_io assignment in the first place
looks suspect because it only set a completion callback when there
wasn't already some other write() call taking place on the same
inode. The ext4 end_io code looks rather intricate and fragile with
all it's reference counting and passing to different contexts for
modification via inode private pointers that aren't protected by
locks...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We had a fencepost error in the lazytime optimization which means that
timestamp would get written to the wrong inode.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
for ext4 encryption which provide better security and performance.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVRsVDAAoJEPL5WVaVDYGj/UUIAI6zLGhq3I8uQLZQC22Ew2Ph
TPj6eABDuTrB/7QpAu21Dk59N70MQpsBTES6yLWWLf/eHp0gsH7gCNY/C9185vOh
tQjzw18hRH2IfPftOBrjDlPGbbBD8Gu9jAmpm5kKKOtBuSVbKQ4GeN6BTECkgwlg
U5EJHJJ5Ahl4MalODFreOE5ZrVC7FWGEpc1y/MquQ0qcGSGlNd35leK5FE2bfHWZ
M1IJfXH5RRVPUBp26uNvzEg0TtpqkigmCJUT6gOVLfSYBw+lYEbGl4lCflrJmbgt
8EZh3Q0plsDbNhMzqSvOE4RvsOZ28oMjRNbzxkAaoz/FlatWX2hrfAoI2nqRrKg=
=Unbp
-----END PGP SIGNATURE-----
Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Some miscellaneous bug fixes and some final on-disk and ABI changes
for ext4 encryption which provide better security and performance"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix growing of tiny filesystems
ext4: move check under lock scope to close a race.
ext4: fix data corruption caused by unwritten and delayed extents
ext4 crypto: remove duplicated encryption mode definitions
ext4 crypto: do not select from EXT4_FS_ENCRYPTION
ext4 crypto: add padding to filenames before encrypting
ext4 crypto: simplify and speed up filename encryption
Currently it is possible to lose whole file system block worth of data
when we hit the specific interaction with unwritten and delayed extents
in status extent tree.
The problem is that when we insert delayed extent into extent status
tree the only way to get rid of it is when we write out delayed buffer.
However there is a limitation in the extent status tree implementation
so that when inserting unwritten extent should there be even a single
delayed block the whole unwritten extent would be marked as delayed.
At this point, there is no way to get rid of the delayed extents,
because there are no delayed buffers to write out. So when a we write
into said unwritten extent we will convert it to written, but it still
remains delayed.
When we try to write into that block later ext4_da_map_blocks() will set
the buffer new and delayed and map it to invalid block which causes
the rest of the block to be zeroed loosing already written data.
For now we can fix this by simply not allowing to set delayed status on
written extent in the extent status tree. Also add WARN_ON() to make
sure that we notice if this happens in the future.
This problem can be easily reproduced by running the following xfs_io.
xfs_io -f -c "pwrite -S 0xaa 4096 2048" \
-c "falloc 0 131072" \
-c "pwrite -S 0xbb 65536 2048" \
-c "fsync" /mnt/test/fff
echo 3 > /proc/sys/vm/drop_caches
xfs_io -c "pwrite -S 0xdd 67584 2048" /mnt/test/fff
This can be theoretically also reproduced by at random by running fsx,
but it's not very reliable, though on machines with bigger page size
(like ppc) this can be seen more often (especially xfstest generic/127)
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
do_blockdev_direct_IO() increments and decrements the inode
->i_dio_count for each IO operation. It does this to protect against
truncate of a file. Block devices don't need this sort of protection.
For a capable multiqueue setup, this atomic int is the only shared
state between applications accessing the device for O_DIRECT, and it
presents a scaling wall for that. In my testing, as much as 30% of
system time is spent incrementing and decrementing this value. A mixed
read/write workload improved from ~2.5M IOPS to ~9.6M IOPS, with
better latencies too. Before:
clat percentiles (usec):
| 1.00th=[ 33], 5.00th=[ 34], 10.00th=[ 34], 20.00th=[ 34],
| 30.00th=[ 34], 40.00th=[ 34], 50.00th=[ 35], 60.00th=[ 35],
| 70.00th=[ 35], 80.00th=[ 35], 90.00th=[ 37], 95.00th=[ 80],
| 99.00th=[ 98], 99.50th=[ 151], 99.90th=[ 155], 99.95th=[ 155],
| 99.99th=[ 165]
After:
clat percentiles (usec):
| 1.00th=[ 95], 5.00th=[ 108], 10.00th=[ 129], 20.00th=[ 149],
| 30.00th=[ 155], 40.00th=[ 161], 50.00th=[ 167], 60.00th=[ 171],
| 70.00th=[ 177], 80.00th=[ 185], 90.00th=[ 201], 95.00th=[ 270],
| 99.00th=[ 390], 99.50th=[ 398], 99.90th=[ 418], 99.95th=[ 422],
| 99.99th=[ 438]
In other setups, Robert Elliott reported seeing good performance
improvements:
https://lkml.org/lkml/2015/4/3/557
The more applications accessing the device, the worse it gets.
Add a new direct-io flags, DIO_SKIP_DIO_COUNT, which tells
do_blockdev_direct_IO() that it need not worry about incrementing
or decrementing the inode i_dio_count for this caller.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Elliott, Robert (Server Storage) <elliott@hp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull third hunk of vfs changes from Al Viro:
"This contains the ->direct_IO() changes from Omar + saner
generic_write_checks() + dealing with fcntl()/{read,write}() races
(mirroring O_APPEND/O_DIRECT into iocb->ki_flags and instead of
repeatedly looking at ->f_flags, which can be changed by fcntl(2),
check ->ki_flags - which cannot) + infrastructure bits for dhowells'
d_inode annotations + Christophs switch of /dev/loop to
vfs_iter_write()"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (30 commits)
block: loop: switch to VFS ITER_BVEC
configfs: Fix inconsistent use of file_inode() vs file->f_path.dentry->d_inode
VFS: Make pathwalk use d_is_reg() rather than S_ISREG()
VFS: Fix up debugfs to use d_is_dir() in place of S_ISDIR()
VFS: Combine inode checks with d_is_negative() and d_is_positive() in pathwalk
NFS: Don't use d_inode as a variable name
VFS: Impose ordering on accesses of d_inode and d_flags
VFS: Add owner-filesystem positive/negative dentry checks
nfs: generic_write_checks() shouldn't be done on swapout...
ocfs2: use __generic_file_write_iter()
mirror O_APPEND and O_DIRECT into iocb->ki_flags
switch generic_write_checks() to iocb and iter
ocfs2: move generic_write_checks() before the alignment checks
ocfs2_file_write_iter: stop messing with ppos
udf_file_write_iter: reorder and simplify
fuse: ->direct_IO() doesn't need generic_write_checks()
ext4_file_write_iter: move generic_write_checks() up
xfs_file_aio_write_checks: switch to iocb/iov_iter
generic_write_checks(): drop isblk argument
blkdev_write_iter: expand generic_file_checks() call in there
...
The original dax patchset split the ext2/4_file_operations because of the
two NULL splice_read/splice_write in the dax case.
In the vfs if splice_read/splice_write are NULL we then call
default_splice_read/write.
What we do here is make generic_file_splice_read aware of IS_DAX() so the
original ext2/4_file_operations can be used as is.
For write it appears that iter_file_splice_write is just fine. It uses
the regular f_op->write(file,..) or new_sync_write(file, ...).
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pulls block_write_begin() into fs/ext4/inode.c because it might need
to do a low-level read of the existing data, in which case we need to
decrypt it.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This takes code from fs/mpage.c and optimizes it for ext4. Its
primary reason is to allow us to more easily add encryption to ext4's
read path in an efficient manner.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused header files and header files which are included in
ext4.h.
Signed-off-by: Sheng Yong <shengyong1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
and read-only images (for which the implementation is mostly just the
reserved code point for a read-only feature :-)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PF+t
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Ext4 bug fixes.
We also reserved code points for encryption and read-only images (for
which the implementation is mostly just the reserved code point for a
read-only feature :-)"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix indirect punch hole corruption
ext4: ignore journal checksum on remount; don't fail
ext4: remove duplicate remount check for JOURNAL_CHECKSUM change
ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize
ext4: support read-only images
ext4: change to use setup_timer() instead of init_timer()
ext4: reserve codepoints used by the ext4 encryption feature
jbd2: complain about descriptor block checksum errors
Pull lazytime mount option support from Al Viro:
"Lazytime stuff from tytso"
* 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4: add optimization for the lazytime mount option
vfs: add find_inode_nowait() function
vfs: add support for a lazytime mount option
This is a port of the DAX functionality found in the current version of
ext2.
[matthew.r.wilcox@intel.com: heavily tweaked]
[akpm@linux-foundation.org: remap_pages went away]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 90a8020 and d6320cb, Jan Kara has fixed this issue partially.
This mmap data corruption still exists in nodelalloc mode, fix this.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Add an optimization for the MS_LAZYTIME mount option so that we will
opportunistically write out any inodes with the I_DIRTY_TIME flag set
in a particular inode table block when we need to update some inode in
that inode table block anyway.
Also add some temporary code so that we can set the lazytime mount
option without needing a modified /sbin/mount program which can set
MS_LAZYTIME. We can eventually make this go away once util-linux has
added support.
Google-Bug-Id: 18297052
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new mount option which enables a new "lazytime" mode. This mode
causes atime, mtime, and ctime updates to only be made to the
in-memory version of the inode. The on-disk times will only get
updated when (a) if the inode needs to be updated for some non-time
related change, (b) if userspace calls fsync(), syncfs() or sync(), or
(c) just before an undeleted inode is evicted from memory.
This is OK according to POSIX because there are no guarantees after a
crash unless userspace explicitly requests via a fsync(2) call.
For workloads which feature a large number of random write to a
preallocated file, the lazytime mount option significantly reduces
writes to the inode table. The repeated 4k writes to a single block
will result in undesirable stress on flash devices and SMR disk
drives. Even on conventional HDD's, the repeated writes to the inode
table block will trigger Adjacent Track Interference (ATI) remediation
latencies, which very negatively impact long tail latencies --- which
is a very big deal for web serving tiers (for example).
Google-Bug-Id: 18297052
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ext4_delete_inode() has been renamed for a long time, update
comments for this.
Signed-off-by: Wang Shilong <wshilong@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently callers adding extents to extent status tree were responsible
for adding the inode to the list of inodes with freeable extents. This
is error prone and puts list handling in unnecessarily many places.
Just add inode to the list automatically when the first non-delay extent
is added to the tree and remove inode from the list when the last
non-delay extent is removed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In this commit we discard the lru algorithm for inodes with extent
status tree because it takes significant effort to maintain a lru list
in extent status tree shrinker and the shrinker can take a long time to
scan this lru list in order to reclaim some objects.
We replace the lru ordering with a simple round-robin. After that we
never need to keep a lru list. That means that the list needn't be
sorted if the shrinker can not reclaim any objects in the first round.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently extent status tree doesn't cache extent hole when a write
looks up in extent tree to make sure whether a block has been allocated
or not. In this case, we don't put extent hole in extent cache because
later this extent might be removed and a new delayed extent might be
added back. But it will cause a defect when we do a lot of writes. If
we don't put extent hole in extent cache, the following writes also need
to access extent tree to look at whether or not a block has been
allocated. It brings a cache miss. This commit fixes this defect.
Also if the inode doesn't have any extent, this extent hole will be
cached as well.
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For bigalloc filesystems we have to check whether newly requested inode
block isn't already part of a cluster for which we already have delayed
allocation reservation. This check happens in ext4_ext_map_blocks() and
that function sets EXT4_MAP_FROM_CLUSTER if that's the case. However if
ext4_da_map_blocks() finds in extent cache information about the block,
we don't call into ext4_ext_map_blocks() and thus we always end up
getting new reservation even if the space for cluster is already
reserved. This results in overreservation and premature ENOSPC reports.
Fix the problem by checking for existing cluster reservation already in
ext4_da_map_blocks(). That simplifies the logic and actually allows us
to get rid of the EXT4_MAP_FROM_CLUSTER flag completely.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When clearing inode journal flag, we call jbd2_journal_flush() to force
all the journalled data to their final locations. Currently we ignore
when this fails and continue clearing inode journal flag. This isn't a
big problem because when jbd2_journal_flush() fails, journal is likely
aborted anyway. But it can still lead to somewhat confusing results so
rather bail out early.
Coverity-id: 989044
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Besides the fact that this replacement improves code readability
it also protects from errors caused direct EXT4_S(sb)->s_es manipulation
which may result attempt to use uninitialized csum machinery.
#Testcase_BEGIN
IMG=/dev/ram0
MNT=/mnt
mkfs.ext4 $IMG
mount $IMG $MNT
#Enable feature directly on disk, on mounted fs
tune2fs -O metadata_csum $IMG
# Provoke metadata update, likey result in OOPS
touch $MNT/test
umount $MNT
#Testcase_END
# Replacement script
@@
expression E;
@@
- EXT4_HAS_RO_COMPAT_FEATURE(E, EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)
+ ext4_has_metadata_csum(E)
https://bugzilla.kernel.org/show_bug.cgi?id=82201
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Delalloc write journal reservations only reserve 1 credit,
to update the inode if necessary. However, it may happen
once in a filesystem's lifetime that a file will cross
the 2G threshold, and require the LARGE_FILE feature to
be set in the superblock as well, if it was not set already.
This overruns the transaction reservation, and can be
demonstrated simply on any ext4 filesystem without the LARGE_FILE
feature already set:
dd if=/dev/zero of=testfile bs=1 seek=2147483646 count=1 \
conv=notrunc of=testfile
sync
dd if=/dev/zero of=testfile bs=1 seek=2147483647 count=1 \
conv=notrunc of=testfile
leads to:
EXT4-fs: ext4_do_update_inode:4296: aborting transaction: error 28 in __ext4_handle_dirty_super
EXT4-fs error (device loop0) in ext4_do_update_inode:4301: error 28
EXT4-fs error (device loop0) in ext4_reserve_inode_write:4757: Readonly filesystem
EXT4-fs error (device loop0) in ext4_dirty_inode:4876: error 28
EXT4-fs error (device loop0) in ext4_da_write_end:2685: error 28
Adjust the number of credits based on whether the flag is
already set, and whether the current write may extend past the
LARGE_FILE limit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@vger.kernel.org
If there is a corrupted file system which has directory entries that
point at reserved, metadata inodes, prohibit them from being used by
treating them the same way we treat Boot Loader inodes --- that is,
mark them to be bad inodes. This prohibits them from being opened,
deleted, or modified via chmod, chown, utimes, etc.
In particular, this prevents a corrupted file system which has a
directory entry which points at the journal inode from being deleted
and its blocks released, after which point Much Hilarity Ensues.
Reported-by: Sami Liedes <sami.liedes@iki.fi>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
The boot loader inode (inode #5) should never be visible in the
directory hierarchy, but it's possible if the file system is corrupted
that there will be a directory entry that points at inode #5. In
order to avoid accidentally trashing it, when such a directory inode
is opened, the inode will be marked as a bad inode, so that it's not
possible to modify (or read) the inode from userspace.
Unfortunately, when we unlink this (invalid/illegal) directory entry,
we will put the bad inode on the ophan list, and then when try to
unlink the directory, we don't actually remove the bad inode from the
orphan list before freeing in-memory inode structure. This means the
in-memory orphan list is corrupted, leading to a kernel oops.
In addition, avoid truncating a bad inode in ext4_destroy_inode(),
since truncating the boot loader inode is not a smart thing to do.
Reported-by: Sami Liedes <sami.liedes@iki.fi>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
When ext4_do_update_inode() gets error from ext4_inode_blocks_set(),
error number should be returned.
Signed-off-by: Li Xi <lixi@ddn.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Use truncate_isize_extended() when hole is being created in a file so that
->page_mkwrite() will get called for the partial tail page if it is
mmaped (see the first patch in the series for details).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Having done a full regression test, we can now drop the
DELALLOC_RESERVED state flag.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
In case of delalloc block i_disksize may be less than i_size. So we
have to update i_disksize each time we allocated and submitted some
blocks beyond i_disksize. We weren't doing this on the error paths,
so fix this.
testcase: xfstest generic/019
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently punch hole code on files with direct/indirect mapping has some
problems which may lead to a data loss. For example (from Jan Kara):
fallocate -n -p 10240000 4096
will punch the range 10240000 - 12632064 instead of the range 1024000 -
10244096.
Also the code is a bit weird and it's not using infrastructure provided
by indirect.c, but rather creating it's own way.
This patch fixes the issues as well as making the operation to run 4
times faster from my testing (punching out 60GB file). It uses similar
approach used in ext4_ind_truncate() which takes advantage of
ext4_free_branches() function.
Also rename the ext4_free_hole_blocks() to something more sensible, like
the equivalent we have for extent mapped files. Call it
ext4_ind_remove_space().
This has been tested mostly with fsx and some xfstests which are testing
punch hole but does not require unwritten extents which are not
supported with direct/indirect mapping. Not problems showed up even with
1024k block size.
CC: stable@vger.kernel.org
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 27dd438542 ("ext4: introduce reserved space") reserves 2% of
the file system space to make sure metadata allocations will always
succeed. Given that, tracking the reservation of metadata blocks is
no longer necessary.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
This commit tries to fix a bug that we can't read symlink properly with
inline data feature when the length of symlink is greater than 60 bytes
but less than extra space.
The key issue is in ext4_inode_is_fast_symlink() that it doesn't check
whether or not an inode has inline data. When the user creates a new
symlink, an inode will be allocated with MAY_INLINE_DATA flag. Then
symlink will be stored in ->i_block and extended attribute space. In
the mean time, this inode is with inline data flag. After remounting
it, ext4_inode_is_fast_symlink() function thinks that this inode is a
fast symlink so that the data in ->i_block is copied to the user, and
the data in extra space is trimmed. In fact this inode should be as a
normal symlink.
The following script can hit this bug.
#!/bin/bash
cd ${MNT}
filename=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789
rm -rf test
mkdir test
cd test
echo "hello" >$filename
ln -s $filename symlinkfile
cd
sudo umount /mnt/sda1
sudo mount -t ext4 /dev/sda1 /mnt/sda1
readlink /mnt/sda1/test/symlinkfile
After applying this patch, it will break the assumption in e2fsck
because the original implementation doesn't want to support symlink
with inline data.
Reported-by: "Darrick J. Wong" <darrick.wong@oracle.com>
Reported-by: Ian Nartowicz <claws@nartowicz.co.uk>
Cc: Ian Nartowicz <claws@nartowicz.co.uk>
Cc: Tao Ma <tm@tao.ma>
Cc: "Darrick J. Wong" <darrick.wong@oracle.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I have been running make namespacecheck to look for unneeded globals, and
found these in ext4.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we perform a data integrity sync we tag all the dirty pages with
PAGECACHE_TAG_TOWRITE at start of ext4_da_writepages. Later we check
for this tag in write_cache_pages_da and creates a struct
mpage_da_data containing contiguously indexed pages tagged with this
tag and sync these pages with a call to mpage_da_map_and_submit. This
process is done in while loop until all the PAGECACHE_TAG_TOWRITE
pages are synced. We also do journal start and stop in each iteration.
journal_stop could initiate journal commit which would call
ext4_writepage which in turn will call ext4_bio_write_page even for
delayed OR unwritten buffers. When ext4_bio_write_page is called for
such buffers, even though it does not sync them but it clears the
PAGECACHE_TAG_TOWRITE of the corresponding page and hence these pages
are also not synced by the currently running data integrity sync. We
will end up with dirty pages although sync is completed.
This could cause a potential data loss when the sync call is followed
by a truncate_pagecache call, which is exactly the case in
collapse_range. (It will cause generic/127 failure in xfstests)
To avoid this issue, we can use set_page_writeback_keepwrite instead of
set_page_writeback, which doesn't clear TOWRITE tag.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
To avoid potential data races, use a spinlock which protects the raw
(on-disk) inode.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.
The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.
This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.
This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently EXT4_MAP_UNINIT is used in dioread_nolock case to mark the
cases where we're using dioread_nolock and we're writing into either
unallocated, or unwritten extent, because we need to make sure that
any DIO write into that inode will wait for the extent conversion.
However EXT4_MAP_UNINIT is not only entirely misleading name but also
unnecessary because we can check for EXT4_MAP_UNWRITTEN in the
dioread_nolock case instead.
This commit removes EXT4_MAP_UNINIT flag.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently in ext4_collapse_range() and ext4_punch_hole() we're
discarding preallocation twice. Once before we attempt to do any changes
and second time after we're done with the changes.
While the second call to ext4_discard_preallocations() in
ext4_punch_hole() case is not needed, we need to discard preallocation
right after ext4_ext_remove_space() in collapse range case because in
the case we had to restart a transaction in the middle of removing space
we might have new preallocations created.
Remove unneeded ext4_discard_preallocations() ext4_punch_hole() and move
it to the better place in ext4_collapse_range()
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently some file system have IS_SWAPFILE check in their fallocate
implementations and some do not. However we should really prevent any
fallocate operation on swapfile so move the check to vfs and remove the
redundant checks from the file systems fallocate implementations.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
All the checks IS_APPEND and IS_IMMUTABLE for the fallocate operation on
the inode are done in vfs. No need to do this again in ext4. Remove it.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_update_i_disksize() is used in only one place, in
the function mpage_map_and_submit_extent(). Move its code to simplify
the code paths, and also move the call to ext4_mark_inode_dirty() into
the i_data_sem's critical region, to be consistent with all of the
other places where we update i_disksize. That way, we also keep the
raw_inode's i_disksize protected, to avoid the following race:
CPU #1 CPU #2
down_write(&i_data_sem)
Modify i_disk_size
up_write(&i_data_sem)
down_write(&i_data_sem)
Modify i_disk_size
Copy i_disk_size to on-disk inode
up_write(&i_data_sem)
Copy i_disk_size to on-disk inode
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
The special handling of PF_MEMALLOC callers in ext4_write_inode()
shouldn't be necessary as there shouldn't be any. Warn about it. Also
update comment before the function as it seems somewhat outdated.
(Changes modeled on an ext3 patch posted by Jan Kara to the linux-ext4
mailing list on Februaryt 28, 2014, which apparently never went into
the ext3 tree.)
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Li Xi