While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
connected with resolution 2560x1600, following error occured even with
IOMMU enabled:
[0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
[0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0
To address the cases where physically contiguous memory MAY NOT be a
mandatory requirement for fb, the patch adds a feature to get non physically
contiguous memory for fb if physically contiguous memory allocation fails
and if IOMMU is supported.
Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
Signed-off-by: Arun Kumar <arun.kk@samsung.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes tracking log functions which were used to debug
in the early development stage and are not so important as were.
So remove them for code clean up.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The fb helper lost its support for reallocating an fb completely, so
no need to return special success values any more.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This should be done in the drivers for two reasons:
- it gets in the way of fastboot efforts
- it links the fb helpers with the crtc helpers instead of going
through the real interface vfuncs, forcing i915 to fake all the
->disable callbacks used by the crtc helper to avoid ugly Oopsen
v2: Resolve conflicts since drivers still call
drm_fb_helper_single_add_all_connectors.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
... it's required. Fix up exynos and the cma helper, and add a
corresponding WARN_ON to drm_fb_helper_restore_fbdev_mode.
Note that tegra calls the fbdev cma helper restore function also from
it's driver-load callback. Which is a bit against current practice,
since usually the call is only from ->lastclose, and initial setup is
done by drm_fb_helper_initial_config.
Also add the relevant drm DocBook entry.
v2: Add promised WARN to restore_fbdev_mode.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We have two classes of framebuffer
- Created by the driver (atm only for fbdev), and the driver holds
onto the last reference count until destruction.
- Created by userspace and associated with a given fd. These
framebuffers will be reaped when their assoiciated fb is closed.
Now these two cases are set up differently, the framebuffers are on
different lists and hence destruction needs to clean up different
things. Also, for userspace framebuffers we remove them from any
current usage, whereas for internal framebuffers it is assumed that
the driver has done this already.
Long story short, we need two different ways to cleanup such drivers.
Three functions are involved in total:
- drm_framebuffer_remove: Convenience function which removes the fb
from all active usage and then drops the passed-in reference.
- drm_framebuffer_unregister_private: Will remove driver-private
framebuffers from relevant lists and drop the corresponding
references. Should be called for driver-private framebuffers before
dropping the last reference (or like for a lot of the drivers where
the fbdev is embedded someplace else, before doing the cleanup
manually).
- drm_framebuffer_cleanup: Final cleanup for both classes of fbs,
should be called by the driver's ->destroy callback once the last
reference is gone.
This patch just rolls out the new interfaces and updates all drivers
(by adding calls to drm_framebuffer_unregister_private at all the
right places)- no functional changes yet. Follow-on patches will move
drm core code around and update the lifetime management for
framebuffers, so that we are no longer required to keep framebuffers
alive by locking mode_config.mutex.
I've also updated the kerneldoc already.
vmwgfx seems to again be a bit special, at least I haven't figured out
how the fbdev support in that driver works. It smells like it's
external though.
v2: The i915 driver creates another private framebuffer in the
load-detect code. Adjust its cleanup code, too.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch changes file license to GPL
Most of exynos files had been copied from some random
file and not updated correctly. So this patch corrects
the file license.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
This patch considers no iommu support to kernel space mapping
of console framebuffer.
Without iommu, we get physical address instead of device address
after dma_alloc_attrs function is called. So we should consider
the case without iommu when it maps console framebuffer with
kernel space.
Changelog v2:
- calll vunmap function only with iommu support.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Changelog v3:
just code cleanup.
Changelog v2:
fix argument to dma_mmap_attr function.
- use pages instead of kvaddr because kvaddr is 0 with
DMA_ATTR_NO_KERNEL_MAPPING.
Changelog v1:
When gem allocation is requested, kernel space mapping isn't needed.
But if need, such as console framebuffer, the physical pages would be
mapped with kernel space though vmap function.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
The 'pages' structure in the exynos gem buffer has been
removed. So we get the fix.smem_start from the first sgl
of the scatter gather table.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Changelog v3:
Passing the actual buffer size instead of vm_size to dma_mmap_attrs.
Changelog v2:
Extracting the private data from fb_info structure to obtain the exynos
gem buffer structure. Now, dma address is obtained from the exynos gem
buffer structure and not from smem_start. Also calling dma_mmap_attrs
(instead of dma_mmap_writecombine) with the same attributes used
during allocation.
Changelog v1:
This patch adds a exynos drm specific implementation of fb_mmap
which supports mapping a non-contiguous buffer to user space.
This new function does not assume that the frame buffer is contiguous
and calls dma_mmap_writecombine for mapping the buffer to user space.
dma_mmap_writecombine will be able to map a contiguous buffer as well
as non-contig buffer depending on whether an IOMMU mapping is created
for drm or not.
Signed-off-by: Prathyush K <prathyush.k@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
With iommu, buffer->dma_addr has device addres so this patch
fixes for physical address to be set to fix.smem_start always.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Inki writes:
"this patch set updates exynos drm framework and includes minor fixups.
and this pull request except hdmi device tree support patch set posted
by Rahul Sharma because that includes media side patch so for this
patch set, we may have git pull one more time in addition, if we get
an agreement with media guys. for this patch, you can refer to below link,
http://comments.gmane.org/gmane.comp.video.dri.devel/74504
this pull request adds hdmi device tree support
and includes related patch set such as disabling of hdmi internal
interrupt, suppport for platform variants for hdmi and mixer,
support to disable video processor based on platform type and
removal of drm common platform data. as you know, this patch
set was delayed because it included an media side patch. so for this,
we got an ack from v4l2-based hdmi driver author, Tomasz Stanislawski."
* 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung: (34 commits)
drm: exynos: hdmi: remove drm common hdmi platform data struct
drm: exynos: hdmi: add support for exynos5 hdmi
drm: exynos: hdmi: replace is_v13 with version check in hdmi
drm: exynos: hdmi: add support for exynos5 mixer
drm: exynos: hdmi: add support to disable video processor in mixer
drm: exynos: hdmi: add support for platform variants for mixer
drm: exynos: hdmi: add support for exynos5 hdmiphy
drm: exynos: hdmi: add support for exynos5 ddc
drm: exynos: remove drm hdmi platform data struct
drm: exynos: hdmi: turn off HPD interrupt in HDMI chip
drm: exynos: hdmi: use s5p-hdmi platform data
drm: exynos: hdmi: fix interrupt handling
drm: exynos: hdmi: support for platform variants
media: s5p-hdmi: add HPD GPIO to platform data
drm/exynos: fix kcalloc size of g2d cmdlist node
drm/exynos: fix to calculate CRTC shown via screen
drm/exynos: fix display power call issue.
drm/exynos: add platform_device_id table and driver data for drm fimd
drm/exynos: Fix potential NULL pointer dereference
drm/exynos: support drm_wait_vblank feature for VIDI
...
Conflicts:
include/drm/exynos_drm.h
Pull drm merge (part 1) from Dave Airlie:
"So first of all my tree and uapi stuff has a conflict mess, its my
fault as the nouveau stuff didn't hit -next as were trying to rebase
regressions out of it before we merged.
Highlights:
- SH mobile modesetting driver and associated helpers
- some DRM core documentation
- i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
combined pte writing, ilk rc6 support,
- nouveau: major driver rework into a hw core driver, makes features
like SLI a lot saner to implement,
- psb: add eDP/DP support for Cedarview
- radeon: 2 layer page tables, async VM pte updates, better PLL
selection for > 2 screens, better ACPI interactions
The rest is general grab bag of fixes.
So why part 1? well I have the exynos pull req which came in a bit
late but was waiting for me to do something they shouldn't have and it
looks fairly safe, and David Howells has some more header cleanups
he'd like me to pull, that seem like a good idea, but I'd like to get
this merge out of the way so -next dosen't get blocked."
Tons of conflicts mostly due to silly include line changes, but mostly
mindless. A few other small semantic conflicts too, noted from Dave's
pre-merged branch.
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
drm/nv98/crypt: fix fuc build with latest envyas
drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
drm/nv41/vm: fix and enable use of "real" pciegart
drm/nv44/vm: fix and enable use of "real" pciegart
drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
drm/nouveau: store supported dma mask in vmmgr
drm/nvc0/ibus: initial implementation of subdev
drm/nouveau/therm: add support for fan-control modes
drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
drm/nouveau/therm: calculate the pwm divisor on nv50+
drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
drm/nouveau/therm: move thermal-related functions to the therm subdev
drm/nouveau/bios: parse the pwm divisor from the perf table
drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
drm/nouveau/therm: rework thermal table parsing
drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
drm/nouveau: fix pm initialization order
drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
drm/nouveau: log channel debug/error messages from client object rather than drm client
drm/nouveau: have drm debugging macros build on top of core macros
...
this patch adds buf_cnt variable in exynos_drm_fb structure and
that means a buffer count to drm framebuffer and also adds two
functions to get/set the buffer count from/to exynos_drm_fb structure.
if pixel format is not DRM_FORMAT_NV12MT then it gets a buffer count
to drm framebuffer refering to mode_cmd->handles and offsets.
but when booted, the buffer count will always be 1 because pixel
format of console framebuffer is RGB format.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
This simplifies drm fb lifetime, and if the crtc/plane needs to hold
a ref to the fb when disabling a pipe until the next vblank, this
avoids the need to make disabling an overlay synchronous. This is a
problem that shows up when userspace is using a drm plane to
implement a hw cursor.. making overlay disable synchronous causes
a performance problem when x11 is rapidly enabling/disabling the
hw cursor. But not making it synchronous opens up a race condition
for crashing if userspace turns around and immediately deletes the
fb. Refcnt'ing the fb makes it possible to solve this problem.
v1: original
v2: add drm_framebuffer_remove() which is called in all paths where
fb->funcs->destroy() was directly called before. This cleans
up the CRTCs/planes that the fb was attached to. You should
only directly use drm_framebuffer_unreference() if you are also
using drm_framebuffer_reference() to keep a ref to the fb.
v3: add comment explaining the fb refcount
v4: remove duplicate 'list_del(&fb->filp_head)'
[airlied: v4.1: fix local rejection]
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The exynos drm driver has several subdrv. They each can be module but it
causes unfixed probe order of exynodr drm driver and each subdrv. It
also needs some weird codes such as exynos_drm_fbdev_reinit and
exynos_drm_mode_group_reinit. This patch can remove weird codes and
clear codes through we doesn't modularity each subdrv.
Also this removes unnecessary codes related module.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
with this patch, we can allocate physically continuous or non-continuous
memory and also it creates scatterlist for iommu support so allocated
memory region can be mapped to iommu page table using scatterlist.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this function ins't needed anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
info->fix.visual already is correctly set from drm_fb_helper_fill_fix.
info->fix.line_length is also set from drm_fb_helper_fill_fix,
so drm_fb_helper_set_par directly instead of a custom
exynos_drm_fbdev_set_par.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These formats(NV12M, NV12MT and YUV420M) have non contiguous multi
planes, so each plane uses different buffer. The exynos drm should
support multi buffer for them.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
The fbdev fb and the user fb is created from same function -
exynos_drm_fb_create, but this function creates not only drm framebuffer
but buffer of fbdev. Remove it because it complicates codes and use
exynos_drm_gem_create() than exynos_drm_buf_create() to create buffer of
fbdev, it give better consistency of codes and more clear
implementation.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
The exynos drm also should use struct drm_mode_fb_cmd2 by changes of
308e5bcbdb commit(drm: add an fb creation
ioctl that takes a pixel format v5).
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Merge in the upstream tree to bring in the mainline fixes.
Conflicts:
drivers/gpu/drm/exynos/exynos_drm_fbdev.c
drivers/gpu/drm/nouveau/nouveau_sgdma.c
Otherwise each driver would need to keep the information inside
their own framebuffer object structure. Also add offsets[]. BOs
on the other hand are driver specific, so those can be kept in
driver specific structures.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
the purpose of this patch is to consider IOMMU support in the future.
EXYNOS4 SoC supports IOMMU also so the address for DMA could be
physical address with IOMMU or device address with IOMMU.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
drm_framebuffer already has width and height so they are meaningless as
parameters when updating fb_info.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
during recreating exynos_drm_fbdev as a new display device probes,
fb_helper is reinitialized but kernel fb is not changed
so kernel_fb_list should be restored after fb_helper is reinitialized.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
this patch adds the following comments and code clean.
- add comment of exynos_drm_crtc_apply() call at page flip time.
- add comment that when exynos_drm_fbdev_reinit() is called,
why num_connector is 0 and also the framebuffers should be destroyed.
- remove buf_off member from struct exynos_drm_overlay because this member
isn't used anymore.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this patch solves the problem that fb_helper is released
when exynos_drm_fbdev_reinit() was called. if this function call
is ok then just return.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
this patch adds common members to overlay structure and
makes each driver such as fimd or hdmi driver set them to
its own structure.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch is a DRM Driver for Samsung SoC Exynos4210 and now enables
only FIMD yet but we will add HDMI support also in the future.
this patch is based on git repository below:
git://people.freedesktop.org/~airlied/linux.git
branch name: drm-next
commit-id: 88ef4e3f4f
you can refer to our working repository below:
http://git.infradead.org/users/kmpark/linux-2.6-samsung
branch name: samsung-drm
We tried to re-use lowlevel codes of the FIMD driver(s3c-fb.c
based on Linux framebuffer) but couldn't so because lowlevel codes
of s3c-fb.c are included internally and so FIMD module of this driver has
its own lowlevel codes.
We used GEM framework for buffer management and DMA APIs(dma_alloc_*)
for buffer allocation so we can allocate physically continuous memory
for DMA through it and also we could use CMA later if CMA is applied to
mainline.
Refer to this link for CMA(Continuous Memory Allocator):
http://lkml.org/lkml/2011/7/20/45
this driver supports only physically continuous memory(non-iommu).
Links to previous versions of the patchset:
v1: < https://lwn.net/Articles/454380/ >
v2: < http://www.spinics.net/lists/kernel/msg1224275.html >
v3: < http://www.spinics.net/lists/dri-devel/msg13755.html >
v4: < http://permalink.gmane.org/gmane.comp.video.dri.devel/60439 >
v5: < http://comments.gmane.org/gmane.comp.video.dri.devel/60802 >
Changelog v2:
DRM: add DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl command.
this feature maps user address space to physical memory region
once user application requests DRM_IOCTL_SAMSUNG_GEM_MMAP ioctl.
DRM: code clean and add exception codes.
Changelog v3:
DRM: Support multiple irq.
FIMD and HDMI have their own irq handler but DRM Framework can regiter
only one irq handler this patch supports mutiple irq for Samsung SoC.
DRM: Consider modularization.
each DRM, FIMD could be built as a module.
DRM: Have indenpendent crtc object.
crtc isn't specific to SoC Platform so this patch gets a crtc
to be used as common object.
created crtc could be attached to any encoder object.
DRM: code clean and add exception codes.
Changelog v4:
DRM: remove is_defult from samsung_fb.
is_default isn't used for default framebuffer.
DRM: code refactoring to fimd module.
this patch is be considered with multiple display objects and
would use its own request_irq() to register a irq handler instead of
drm framework's one.
DRM: remove find_samsung_drm_gem_object()
DRM: move kernel private data structures and definitions to driver folder.
samsung_drm.h would contain only public information for userspace
ioctl interface.
DRM: code refactoring to gem modules.
buffer module isn't dependent of gem module anymore.
DRM: fixed security issue.
DRM: remove encoder porinter from specific connector.
samsung connector doesn't need to have generic encoder.
DRM: code clean and add exception codes.
Changelog v5:
DRM: updated fimd(display controller) driver.
added various pixel formats, color key and pixel blending features.
DRM: removed end_buf_off from samsung_drm_overlay structure.
this variable isn't used and end buffer address would be
calculated by each sub driver.
DRM: use generic function for mmap_offset.
replaced samsung_drm_gem_create_mmap_offset() and
samsung_drm_free_mmap_offset() with generic ones applied
to mainline recentrly.
DRM: removed unnecessary codes and added exception codes.
DRM: added comments and code clean.
Changelog v6:
DRM: added default config options.
DRM: added padding for 64-bit align.
DRM: changed prefix 'samsung' to 'exynos'
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vikas Sajjan