uClibc Linuxthreads.old doesn't support the pthread_attr_setaffinity_np()
functioo:
----------------->8-----------------------
CC bench/futex-hash.o
CC bench/futex-wake.o
bench/futex-hash.c: In function 'bench_futex_hash':
bench/futex-hash.c:161:3: error: implicit declaration of function
'pthread_attr_setaffinity_np' [-Werror=implicit-function-declaration]
ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cpu_set_t),
&cpu);
^
bench/futex-hash.c:161:3: error: nested extern declaration of
'pthread_attr_setaffinity_np' [-Werror=nested-externs]
----------------->8-----------------------
So introduce a test to check that and if not available provide a stub.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1421156604-30603-6-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build with 'make ARCH=x86' and dwarf unwind is on, there is a
compiling error:
CC /home/wn/perf/arch/x86/util/unwind-libdw.o
CC /home/wn/perf/arch/x86/tests/regs_load.o
arch/x86/tests/regs_load.S: Assembler messages:
arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push'
arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop'
make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1
make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24!
make: *** [all] Error 2
...
Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT.
'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'.
However, when building x86_64 kernel, ARCH=x86 is valid and commonly
used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86'
to build x86_64 perf, which causes mismatching.
As __LP64__ is defined for x86_64 as well, we can consolidate the
__x86_64__ check to the __LP64__ check and get rid of the IS_X86_64
IMHO.
(This patch is made by Namhyung Kim when replying my v1 patch:
https://lkml.org/lkml/2015/1/7/17
I modified the code to remove dependency on RAW_ARCH:
https://lkml.org/lkml/2015/1/7/865
Namhyung Kim didn't provide his SOB in his original email. I add
mine only for my modification.)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com
[ Namhyung provided his S-o-B on a followup to this patch thread on lkml ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current EXTLIBS contains -lelf by default and removes it when libelf is
not detected.
This is little bit confusing since we can now build perf without libelf
so there's no need to handle it differently than other libraries.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1415337606-2186-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now my Archlinux box shows module symbols correctly.
Before:
$ perf report --stdio
Failed to open /tmp/perf-3477.map, continuing without symbols
no symbols found in /usr/bin/date, maybe install a debug package?
No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found
[drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols
No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found
[jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols
No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found
[ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols
No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found
[scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols
No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found
[libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols
No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found
[libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols
No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found
[mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols
No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found
[iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols
No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found
[cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols
No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found
[iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols
...
#
# Overhead Command Shared Object Symbol
# ........ ............... ....................... ........................................................
#
0.03% swapper [ext4] [k] 0x000000000000fe2e
0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue
0.03% swapper [ext4] [k] 0x000000000000fc2b
0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b
0.03% swapper [kernel.kallsyms] [k] ktime_add_safe
0.03% swapper [kernel.kallsyms] [k] elv_completed_request
0.03% swapper [libata] [k] 0x0000000000003997
0.03% swapper [libahci] [k] 0x0000000000001f25
0.03% swapper [kernel.kallsyms] [k] rb_next
0.03% swapper [kernel.kallsyms] [k] blk_finish_request
0.03% swapper [ext4] [k] 0x0000000000010248
0.00% perf [kernel.kallsyms] [k] native_write_msr_safe
After:
$ perf report --stdio
Failed to open /tmp/perf-3477.map, continuing without symbols
no symbols found in /usr/bin/tr, maybe install a debug package?
...
#
# Overhead Command Shared Object Symbol
# ........ ............... ........................... ......................................................
#
0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap
0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor
0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid
0.02% firefox [e1000e] [k] __ew32_prepare
0.02% swapper [libahci] [k] ahci_handle_port_interrupt
0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock
0.02% swapper [e1000e] [k] e1000_clean_tx_irq
0.02% dwm [kernel.kallsyms] [k] __schedule
0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime
0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers
0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx
0.01% firefox [vdso] [.] __vdso_gettimeofday
0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
popen() causes an error message to print if perf-read-vdso32 does not
run. Avoid that by not trying to run it if it was not built. Ditto
perf-read-vdsox32.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414061124-26830-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools copy VDSO out of memory. However, on 64-bit machines there
may be 32-bit compatibility VDOs also. To copy those requires separate
32-bit executables.
This patch adds to the build additional programs perf-read-vdso32 and
perf-read-vdsox32 for 32-bit and x32 respectively.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>,
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1414061124-26830-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This makes it work with non-GNU grep's as well.
Signed-off-by: John Spencer <maillist-linux@barfooze.de>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://thread.gmane.org/gmane.linux.kernel.perf.user/1686
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need a way to specify $(lib) part of the installation path for
traceevent plugin libraries. Currently we use 'lib64' for x86_64 and
'lib' otherwise.
Instead of listing all possible values, this change allows the rpm spec
code to specify the correct $(lib) part based on processed architecture,
like
$ make ... lib=%{_lib}
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408978552-17131-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The powerpc skip callchain code uses DWARF, so we must disable it if
DWARF is disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140825182506.2be6512d@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to PEP 394 recommendation [1], it's more portable to use
python2 rather than plain python to refer python binary version 2.
Since there're distros using python3 by default like Arch, and we don't
support python3 (yet), it'd be better using python2 explicitly.
But older versions (prior to 2.7) seem not to provide python2 but just
python. Given that it's only old version, try python2 first and then
fallback to python. It'll ensure that it always points to python 2.x.
I tested (compiles and perf script runs) with the combinations:
1) python -> python2.x, python-config -> python2.x-config
python2 N/A, python2-config N/A
2) python -> python3.x, python-config -> python3.x-config
python2 -> python2.x, python2-config -> python2.x-config
3) python -> python2.x, python-config -> python2.x-config
python2 -> python2.x, python2-config -> python2.x-config
4) python -> python2.x, python-config -> python2.x-config
python2 -> python2.x, python2-config N/A
Based on / replaces the patch 2/2 by Namhyung Kim.
[1] https://www.python.org/dev/peps/pep-0394
Based-on-patch-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/53DF8493.6070206@tu-dresden.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas reported that make PYTHON=python2 is not work on some systems. I
can reproduce it on my ArchLinux box too.
This is because it's overridden by config/feature-checks/Makefile
regardless of PYTHON setting. I guess it's a bug slipped into during
the feature checking change.
Actually, we don't need to check python-config in the feature-checks.
We can just pass appropriate FEATURE_CHECK_*FLAGS.
Reported-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Ilsche <thomas.ilsche@tu-dresden.de>
Link: http://lkml.kernel.org/r/1406617040-26909-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a feature test for __sync_val_compare_and_swap() and
__sync_bool_compare_and_swap()
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1405332185-4050-30-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
kvm stat support is currently conditional on i386/x86_64. Let's abstract
this into a HAVE_KVM_STAT_SUPPORT flag, so that other architectures can
support kvm stat as well.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1404395992-17095-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When saving the callchain on Power, the kernel conservatively saves excess
entries in the callchain. A few of these entries are needed in some cases
but not others. We should use the DWARF debug information to determine
when the entries are needed.
Eg: the value in the link register (LR) is needed only when it holds the
return address of a function. At other times it must be ignored.
If the unnecessary entries are not ignored, we end up with duplicate arcs
in the call-graphs.
Use the DWARF debug information to determine if any callchain entries
should be ignored when building call-graphs.
Callgraph before the patch:
14.67% 2234 sprintft libc-2.18.so [.] __random
|
--- __random
|
|--61.12%-- __random
| |
| |--97.15%-- rand
| | do_my_sprintf
| | main
| | generic_start_main.isra.0
| | __libc_start_main
| | 0x0
| |
| --2.85%-- do_my_sprintf
| main
| generic_start_main.isra.0
| __libc_start_main
| 0x0
|
--38.88%-- rand
|
|--94.01%-- rand
| do_my_sprintf
| main
| generic_start_main.isra.0
| __libc_start_main
| 0x0
|
--5.99%-- do_my_sprintf
main
generic_start_main.isra.0
__libc_start_main
0x0
Callgraph after the patch:
14.67% 2234 sprintft libc-2.18.so [.] __random
|
--- __random
|
|--95.93%-- rand
| do_my_sprintf
| main
| generic_start_main.isra.0
| __libc_start_main
| 0x0
|
--4.07%-- do_my_sprintf
main
generic_start_main.isra.0
__libc_start_main
0x0
TODO: For split-debug info objects like glibc, we can only determine
the call-frame-address only when both .eh_frame and .debug_info
sections are available. We should be able to determin the CFA
even without the .eh_frame section.
Fix suggested by Anton Blanchard.
Thanks to valuable input on DWARF debug information from Ulrich Weigand.
Reported-by: Maynard Johnson <maynard@us.ibm.com>
Tested-by: Maynard Johnson <maynard@us.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140625154903.GA29607@us.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
When the user does:
make -C tools/perf LDFLAGS=-static
asking for a static build, and the glibc-static (or equivalent) is not
found, the message wasn't clear, stating that one of glibc-devel or
glibc-static wasn't installed, clarify it checking if -static is
present in LDFLAGS.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-7e0sfobbzgeydzi9gsz8ss3m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently 'make help' message has such hint:
use "make prefix=<path> <install target>" to install to a particular
path like make prefix=/usr/local install install-doc
But this is misleading, when I specify "prefix=/usr/local", it has got no
respect at all.
This is because that, "DESTDIR" is considered first. In this case, "DESTDIR"
has an empty value, so "prefix" is honored. However, "prefix" is unconditionally
assigned to $HOME, regardless of what it is set to from command line. So our
"prefix" setting got no respect and the actual destination falls back to $HOME.
This patch fixes this issue and corrects the help message.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1401727474-19370-1-git-send-email-nasa4836@gmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
We were just showing "libperl: OFF", unlike other features where we
present the user with a message helping have a feature built in.
Fix it by adding the following message:
config/Makefile:450: Missing perl devel files. Disabling perl scripting support, consider installing perl-ExtUtils-Embed
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-t7yeud34ehimlfi6pklb29p7@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding dwarf unwind test, that setups live machine data over
the perf test thread and does the remote unwind.
Need to use -fno-optimize-sibling-calls for test compilation,
otherwise 'krava_*' function calls are optimized into jumps
and omitted from the stack unwind.
So far it was enabled only for x86.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-3-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The on_exit() function was only used in perf record but it's gone in
previous patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Link: http://lkml.kernel.org/r/1399855645-25815-2-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
. Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
. Move u64_swap union to its single user's header, evsel.h (Borislav Petkov)
. Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin)
. Handle EINTR error for readn/writen (Namhyung Kim)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z16U
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
* Move u64_swap union to its single user's header, evsel.h (Borislav Petkov)
* Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin)
* Handle EINTR error for readn/writen (Namhyung Kim)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arch/x86/tests/regs_load.S is missing the linker note about the stack
requirements, therefore making the linker fall back to an executable
stack. As this object gets linked against the final perf binary, it'll
needlessly end up with an executable stack. Fix this by adding the
appropriate linker note.
Also add a global linker flag to prevent future regressions, as
suggested by Jiri. This way perf won't get an executable stack even if
we fail to add the .GNU-stack linker note to future assembler files.
Though, doing so might create regressions the other way around, when
(statically) linking against libraries needing an executable stack.
But, apparently, regressing in that direction is wanted as it is an
indicator of poor code quality -- or just missing linker notes.
Fixes: 3c8b06f981 ("perf tests x86: Introduce perf_regs_load function")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398617466-22749-1-git-send-email-minipli@googlemail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
There's false assumption in the library detection code
assuming -liberty and -lz are always present once bfd
is detected. The fails on Ubuntu (14.04) as reported
by Ingo.
Forcing the bdf dependency libraries detection any
time bfd library is detected.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398676935-6615-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This patch hooks in the perf_regs and libunwind code for ARM64.
The tools/perf/arch/arm64 is created; it contains the arch specific
code for DWARF unwinding.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1398688353-3737-1-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
So far there's only x86 libdw unwind support merged in perf.
Disable it on all other architectures in case libdw unwind
support is detected in system.
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1397988006-14158-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
The Makefile logic sets FEATURE_CHECKS_CFLAGS-libdw-dwarf-unwind and
FEATURE_CHECKS_LDFLAGS-libdw-dwarf-unwind only if LIBDW_DIR is
defined. This means that under a normal setup,
$ make NO_LIBUNWIND=1
won't automatically pick up libdw. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395873845-466-1-git-send-email-artagnon@gmail.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
I.e. do the same as when NO_LIBELF is explicitely passed in the 'make'
command line, fixing this:
Auto-detecting system features:
... dwarf: [ OFF ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ OFF ]
... DWARF post unwind library: libdw
<SNIP>
CC /tmp/build/perf/util/symbol-minimal.o
CC /tmp/build/perf/util/unwind-libdw.o
arch/x86/util/unwind-libdw.c:1:30: fatal error: elfutils/libdwfl.h: No such file or directory
compilation terminated.
CC /tmp/build/perf/tests/keep-tracking.o
util/unwind-libdw.c:2:28: fatal error: elfutils/libdw.h: No such file or directory
compilation terminated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e39j1yxanltjx4t0msse63ax@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Pull arch/tile updates from Chris Metcalf:
"These fix a few stray build issues seen in linux-next, and also add
the minimal required support for perf to tilegx"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: remove unused variable 'devcap'
tile: Fix vDSO compilation issue with allyesconfig
perf tools: Allow building for tile
tile/perf: Support perf_events on tilegx and tilepro
tile: Enable NMIs on return from handle_nmi() without errors
tile: Add support for handling PMC hardware
tile: don't use __get_cpu_var() with structure-typed arguments
tile: avoid overflow in ns2cycles
Tested by building perf:
- Cross-compiled for tile on x86_64
- Built natively on tile
Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects
default DWARf post unwinder based on detected features (libdw and
libunwind support)
If both are detected the libunwind is selected as default. Simple
'make' will try to add:
- libunwind unwinder if present
- libdw unwinder if present
- disable dwarf unwind if non of libunwind and libdw
libraries are present
If one of the DWARF unwind libraries is detected, message is displayed
which one (libunwind/libdw) is compiled in.
Examples:
- compile in libdw unwinder if present:
$ make NO_LIBUNWIND=1
- compile in libdw (with libdw installation directory) unwinder if present:
$ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... DWARF post unwind library: libdw
- disable post dwarf unwind completely:
$ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... DWARF post unwind library: libunwind
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com
[ Add suggestion about setting LIBDW_DIR when not finding libdw ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding libdw DWARF post unwind support, which is part of
elfutils-devel/libdw-dev package from version 0.158.
The new code is contained in unwin-libdw.c object, and implements
unwind__get_entries unwind interface function.
New Makefile variable NO_LIBDW_DWARF_UNWIND was added to control its
compilation, and is marked as disabled now. It's factored with the rest
of the Makefile unwind build code in the next patch.
Arch specific code was added for x86.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When one has libunwind installed somewhere the perf tools build process
doesn't expects it to be, this happens:
[acme@ssdandy linux]$ make O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
config/Makefile:312: No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1
Auto-detecting system features:
<SNIP>
... libunwind: [ OFF ]
Change the message so that it tells how to use a non-standard libunwind
install directory:
config/Makefile:312: No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
[acme@ssdandy linux]$ make LIBUNWIND_DIR=/opt/libunwind-git/ O=/tmp/build/perf -C tools/perf/ install-bin
make: Entering directory `/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
<SNIP>
... libunwind: [ on ]
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-huoxnou7sw85lm58k3pi1xhw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dump of interesting build directories to the make VF=1 output.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... backtrace: [ on ]
... fortify-source: [ on ]
... gtk2-infobar: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... libpython-version: [ on ]
... on-exit: [ on ]
... stackprotector-all: [ on ]
... timerfd: [ on ]
... libunwind-debug-frame: [ OFF ]
... bionic: [ OFF ]
... prefix: /home/jolsa
... bindir: /home/jolsa/bin
... libdir: /home/jolsa/lib64
... sysconfdir: /home/jolsa/etc
Adding functions to print variable/text in features display -
feature_print_var/feature_print_text (feature_print_text is used in next
patches).
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the we display all detected features/libraries by following
rules:
- if one of the features is missing
- if it's build from clean tree
This patch changes changes this behavior in several ways.
- We no longer display all detected features, only detected libraries
are displayed by default:
$ make
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
The assumption is, that above libraries are the most interesting part
of the detection, while we don't care much about detection of on-exit
support.
- If all above libraries are detected, the default is not shown on
subsequent builds.
- If one of the above libraries is missing, the detection output is
forced.
- The features status is stored in PERF-FEATURES file and the detection
output is forced in case the there's difference between the file
contents and currently detected features.
- If you want to see all detected features, you can use VF=1 make
variable, that forces the detected features output.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libunwind: [ on ]
... backtrace: [ on ]
... fortify-source: [ on ]
... gtk2-infobar: [ on ]
... libelf-getphdrnum: [ on ]
... libelf-mmap: [ on ]
... libpython-version: [ on ]
... on-exit: [ on ]
... stackprotector-all: [ on ]
... timerfd: [ on ]
... libunwind-debug-frame: [ OFF ]
... bionic: [ OFF ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing global macro HAVE_DWARF_UNWIND_SUPPORT to indicate we have
dwarf unwind support. Any library providing the dwarf post unwind
support will enable this macro.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The plugindir_SQ definition contains $(prefix) which is not needed as
the $(libdir) definition already contains prefix in it. This leads to
the path including an extra prefix in it, e.g. /usr/usr/lib64.
The -DPLUGIN_DIR defintion includes DESTDIR. This is incorrect, as it
sets the plugin search path to include the value of DESTDIR. DESTDIR is
a mechanism to install in a non-standard location such as a chroot or an
RPM build root. In the RPM case, this leads to the search path being
incorrect after the resulting RPM is installed (or in some cases an RPM
build failure).
Remove both of these unnecessary inclusions.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140122150147.GK16455@hansolo.jdub.homelinux.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the feature-checks Makefile does not inherit $(CC), and calls
cc rather than $(CROSS_COMPILE)gcc. Thus the feature checks invoke the
native toolchain rather than the cross toolchain, and can identify
features as available when they are not. This can break the build.
Additionally the native pkg-config is always called as opposed to
$(CROSS_COMPILE)pkg-config, so the wrong flags and paths may be passed
to the cross compiler.
This patch passes CROSS_COMPILE down to the feature-checks Makefile, and
forces its use. Additionally pkg-config is replaced with
$(CROSS_COMPILE)pkg-config via a new $(PKG_CONFIG) variable. This patch
has been build tested on x86_64 and arm.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1389782648-4417-4-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 01287e2cb7, test-volatile-register-var.c is no more built
as part of the automatic feature check.
This patch remove the unneeded file.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/339d86ad76741ed929defd18541f774b404003b4.1389461371.git.ydroneaud@opteya.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that it can be shared with others like libtraceevent.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1389276059-8829-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of explicitly adding same value into
FEATURE_CHECK_(C|LD)FLAGS-all variables we can do that automatically.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1389098853-14466-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I need to use arch related setup in the tests/make, so moving arch setup
into Makefile.arch.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1388759553-12974-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving QUIET_(CLEAN|INSTAL) variables into:
tools/scripts/Makefile.include
to be usable by other tools. The change to use them in libtraceevent is
in following patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1387460527-15030-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the per-feature check flags for the unwinding feature in order to
correctly compile the test-all, libunwind and libunwind-debug-frame
feature checks.
Tested on x86_64, ARMv7 and ARMv8 with and without LIBUNWIND_DIR set in
'make -C tools/perf'
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-3-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add CFLAGS and LDFLAGS for each feature to be checked. This allows to
pass flags and parameters to the feature checks compilation. Also
simplifies the feature check makefile, to come in a subsequent patch.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-2-git-send-email-jean.pihet@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use -fstack-protector-all option to enable stack protecting for all
available functions. There's no reason for enabling -Wstack-protector to
get warning for unprotected functions.
Removing stackprotector feature check which was used to enable the
-Wstack-protector option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The package required for numa is named numactl-devel in Fedora or RHEL,
and libnuma-devel in OpenSuSE, and libnuma-dev in Ubuntu.
This patch corrects the package name in warning message in
feature-libnuma checking.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Link: http://lkml.kernel.org/r/1385998008-6851-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set feature-libunwind-debug-frame. We don't want it in
CORE_FEATURE_TESTS because it's not the generic case, but we
need to set it in the !feature-libunwind case.
Also, because x86 distributions typically don't have
dwarf_find_debug_frame() unwinding method:
test-libunwind-debug-frame.c:(.text+0x31): undefined reference to `_Ux86_64_dwarf_find_debug_frame'
Restrict this new API to ARM for the time being.
With this patch test-all.c works again, so repeat perf builds
are fast again:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,452899660 seconds time elapsed ( +- 0,11% )
While with before it was:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
1,674001829 seconds time elapsed ( +- 0,16% )
[ Includes fix to config/feature-checks/Makefile from Will Deacon. ]
Tested-by: Will Deacon <will.deacon@arm.com>
Tested-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-scsoctqzmou3rpkixCHezy9e@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'feature_timerfd' is checked all the time and calculated explicitly,
in a serial fashion. Add it to CORE_FEATURE_TESTS which causes it to
be built in parallel, using the newfangled parallel build autodetection
code.
This shaves 137 msecs off the perf build time on my system, which
speeds up the common case cached build by 43%:
Before:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,453771441 seconds time elapsed ( +- 0,09% )
After:
comet:~/tip> perf stat --null --repeat 5 make -C tools/perf/
[...]
0,316290185 seconds time elapsed ( +- 0,24% )
Cc: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-bb92CmexihopoSyqnkqepvsy@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull ARM updates from Russell King:
"Included in this series are:
1. BE8 (modern big endian) changes for ARM from Ben Dooks
2. big.Little support from Nicolas Pitre and Dave Martin
3. support for LPAE systems with all system memory above 4GB
4. Perf updates from Will Deacon
5. Additional prefetching and other performance improvements from Will.
6. Neon-optimised AES implementation fro Ard.
7. A number of smaller fixes scattered around the place.
There is a rather horrid merge conflict in tools/perf - I was never
notified of the conflict because it originally occurred between Will's
tree and other stuff. Consequently I have a resolution which Will
forwarded me, which I'll forward on immediately after sending this
mail.
The other notable thing is I'm expecting some build breakage in the
crypto stuff on ARM only with Ard's AES patches. These were merged
into a stable git branch which others had already pulled, so there's
little I can do about this. The problem is caused because these
patches have a dependency on some code in the crypto git tree - I
tried requesting a branch I can pull to resolve these, and all I got
each time from the crypto people was "we'll revert our patches then"
which would only make things worse since I still don't have the
dependent patches. I've no idea what's going on there or how to
resolve that, and since I can't split these patches from the rest of
this pull request, I'm rather stuck with pushing this as-is or
reverting Ard's patches.
Since it should "come out in the wash" I've left them in - the only
build problems they seem to cause at the moment are with randconfigs,
and since it's a new feature anyway. However, if by -rc1 the
dependencies aren't in, I think it'd be best to revert Ard's patches"
I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences. Any errors are likely mine. Let's
see how the crypto issues work out..
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
ARM: 7871/1: amba: Extend number of IRQS
ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
ARM: 7878/1: nommu: Implement dummy early_paging_init()
ARM: 7876/1: clear Thumb-2 IT state on exception handling
ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
ARM: footbridge: fix build warnings for netwinder
ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
ARM: fix misplaced arch_virt_to_idmap()
ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
ARM: 7862/1: pcpu: replace __get_cpu_var_uses
ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
...
feature_check needs to be invoked through call, and LDFLAGS may not be
set so quotes are needed.
Thanks to Jiri for spotting the quotes around LDFLAGS; that one was
driving me nuts with the upcoming timerfd feature detection.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383064996-20933-1-git-send-email-dsahern@gmail.com
[ Fixed conflict with 8a0c4c2843 ("perf tools: Fix libunwind build and feature detection for 32-bit build") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the OS does not have timerfd support (e.g., older OS'es like RHEL5)
disable perf kvm stat live.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383064996-20933-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use -lunwind-x86 instead of -lunwind-x86_64 for 32-bit build.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Setting EXTRA_CFLAGS=-m32 did not work because it was not passed around.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1383313899-15987-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the absence of s DEBUG variable definition on the command line perf
tools was building without optimization. Fix by assigning DEBUG if it
is not defined.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
builtin-record.c:42:12: error: static declaration of 'on_exit' follows non-static declaration
In file included from util/util.h:51:0,
from builtin.h:4,
from builtin-record.c:8:
/usr/include/stdlib.h:536:12: note: previous declaration of 'on_exit' was here
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382099356-4918-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim noticed that the autodep .d file inclusion rule was
unnecessarily complicated:
> > +-include *.d */*.d
>
> Hmm.. this */*.d part is really needed?
Only include *.d files.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim noticed that the stackprotector testcase was incomplete:
> The flag being checked should be -"W"stack-protector instead of
> -"f"stack-protector. And the gcc manpage says that -Wstack-protector is
> only active when -fstack-protector is active. So the end result should
> look like
>
> $(BUILD) -Werror -fstack-protector -Wstack-protector
Add -Wstack-protector.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim noticed that the volatile-register-var feature check
is superfluous:
> The gcc manpage says this warning is enabled by -Wall, and we add -Wall
> to CFLAGS before doing feature checks. So all gcc versions that support
> -Wvolatile-register-var enables it by default without this check and
> older gcc versions will always fail the feature check.
Remove it - this will further speed up feature checks.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ulrich Drepper and Namhyung Kim reported that the libelf logic in
config/Makefile is duplicated in part.
Remove the duplication, and also remove the now unused FLAGS_LIBELF
variable.
Reported-by: Ulrich Drepper <drepper@gmail.com>
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim reported these duplicate DPACKAGE definitions:
test-libbfd:
$(BUILD) -DPACKAGE='perf' -DPACKAGE=perf -lbfd -ldl
Fix all affected places and use Namhyung's suggestion that the
definition should look like a normal C string: -DPACKAGE='"perf"'.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported that 'make DEBUG=1' does not work anymore.
The reason is that 'Makefile' only passes it through to
'Makefile.perf' via the environment, but 'Makefile.perf'
checks that it's a command line option:
ifeq ("$(origin DEBUG)", "command line")
PERF_DEBUG = $(DEBUG)
endif
So pass it through properly, and also clean up DEBUG parameter
handling while at it and fix a couple of annoyances:
- DEBUG=0 used to be interpreted as 'debugging on'. Turn it
into 'debugging off' instead.
- Same was the case for 'DEBUG=' - turn that into debug-off
as well.
- Pass in just a clean, sanitized 'DEBUG' value and get rid of
the intermediate, unnecessary PERF_DEBUG variable.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We fail build with NO_DEMANGLE with missing -lbfd externals error.
The reason is that we now use bfd code in srcline object:
perf tools: Implement addr2line directly using libbfd
So we need to check/add -lbfd always now.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
'make install' used to show all the install lines, which is way too
verbose to be really informative to the user.
Implement summary output instead:
comet:~/tip/tools/perf> make install
BUILD: Doing 'make -j12' parallel build
SUBDIR Documentation
INSTALL Documentation-man
INSTALL binaries
INSTALL libexec
INSTALL perf-archive
INSTALL perl-scripts
INSTALL python-scripts
INSTALL bash_completion-script
INSTALL tests
'make install V=1' will still show the old, detailed output.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1381312169-17354-5-git-send-email-mingo@kernel.org
[ Fixed conflict with libperf-gtk patches in acme/perf/core, cope with 'trace' alias ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make clean' used to show all the rm lines, which isn't really
informative in any way and spams the console.
Implement summary output:
comet:~/tip/tools/perf> make clean
CLEAN libtraceevent
CLEAN liblk
CLEAN config
CLEAN core-objs
CLEAN core-progs
CLEAN core-gen
CLEAN Documentation
CLEAN python
'make clean V=1' will still show the old, detailed output.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381312169-17354-2-git-send-email-mingo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we build perf with NO_LIBPYTHON=1 NO_LIBPERL=1 the '-ldl' is not
added to libs build fails if we have gtk2 code in, because it depends on
it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1380221754-29865-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the srcline sort key is used , the external addr2line utility needs
to be run for each hist entry to get the srcline info. This can consume
quite a time if one has a huge perf.data file.
So rather than executing the external utility, implement it internally
and just call it. We can do it since we've linked with libbfd already.
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-9-git-send-email-namhyung@kernel.org
[ Use a2l_data struct instead of static globals ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separate out GTK codes to a shared object called libperf-gtk.so. This
time only GTK codes are built with -fPIC and libperf remains as is. Now
run GTK hist and annotation browser using libdl.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1379053663-13706-1-git-send-email-namhyung@kernel.org
[ Fix it up wrt Ingo's tools/perf build speedups ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove DUMMY by making sure 'feature_print' is evaluated and thus
all messages are printed.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20131008155110.GA15558@krava.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Ahern reported that when passing in LDFLAGS=-static then
the feature checks still succeed - causing build failures down
the line because the static libraries are missing.
Solve this by passing through LDFLAGS to the feature-check
Makefile.
Reported-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20131007155129.GA1066@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The various testcases used different styles, which was not really
visible as long as they hid in feature-tests.mak. Now that they
are out in the open make them prettier.
( Also delete the leftover, empty feature-tests.mak file. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-drDWk8xltndjdsespzjbhu6w@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo noticed that the feature-check binaries are generated in the
config/check-features/ directory even if O= is specified.
Implement $(OUTPUT) logic for config/check-features/Makefile.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-NLwlnv5prsubuey0vfocebym@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Simplify test-all.c by including it all the testcases via #include.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pcZlwqq5ou7Ebvkekvhtzfbm@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to include them into test-all.c directly, by making sure
that they build cleanly and without warnings.
Also make sure they make a certain amount of sense and don't crash
when executed.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Mn9gsdutzopoowk3xurqpsxE@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Also remove try-cc et al. These got obsoleted by the split-out feature checks in
config/feature-checks/.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-Y6ailbiranadqlrl8Dfivjbi@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Note that these are rarely executed tests, so we call feature_check() explicitly
and don't have them in CORE_FEATURE_CHECKS.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-pvumlx6mbtfxffgrlwO2mRcx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Change the print-out of auto-detected features by making sure that
repeat invocations of 'make' when all features are successfully
detected do not produce the (rather lengthy) autodetection printout.
( When one or more features are missing then we still print out the
feature detection table, to make sure people are aware of the
resulting limitations. )
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-qd8sMsshcjomxqx9bQcufmaa@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The detection of certain rarely detected features can be delayed
to when they are actually needed.
So speed up the common case of auto-detection by pre-building only
a core set of features and populating only their feature-flags.
[ Features not listed in CORE_FEATURES need to built explicitly
via the feature_check() function. ]
(Also order the feature names alphabetically, while at it.)
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-xQkuveknd0gqla1dfxrqKpkl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Concatenate all feature checks into test-all.c.
This can be built and checked faster than all the individual tests.
If test-all fails then we still check all the individual features, so
this is a pure speedup, it should have no effects on functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-5hlcb2qorzwfwrWTjiygjjih@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The strlcpy() feature check slows every build unnecessarily - so make it
a __weak function so it does not have to be auto-detected.
If the libc (or any other library) has an strlcpy() implementation it will
be used - otherwise our fallback is active.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-zjbrcupapu08ePsyYhhhxiwk@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nest the rules properly. No change in functionality.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-jjlmizjmhockUs04wqnScnkl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vineet Gupta