Commit Graph

148 Commits

Author SHA1 Message Date
Nikolay Aleksandrov b6cb5ac833 net: bridge: add per-port multicast flood flag
Add a per-port flag to control the unknown multicast flood, similar to the
unknown unicast flood flag and break a few long lines in the netlink flag
exports.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01 22:48:33 -07:00
Ido Schimmel 6bc506b4fb bridge: switchdev: Add forward mark support for stacked devices
switchdev_port_fwd_mark_set() is used to set the 'offload_fwd_mark' of
port netdevs so that packets being flooded by the device won't be
flooded twice.

It works by assigning a unique identifier (the ifindex of the first
bridge port) to bridge ports sharing the same parent ID. This prevents
packets from being flooded twice by the same switch, but will flood
packets through bridge ports belonging to a different switch.

This method is problematic when stacked devices are taken into account,
such as VLANs. In such cases, a physical port netdev can have upper
devices being members in two different bridges, thus requiring two
different 'offload_fwd_mark's to be configured on the port netdev, which
is impossible.

The main problem is that packet and netdev marking is performed at the
physical netdev level, whereas flooding occurs between bridge ports,
which are not necessarily port netdevs.

Instead, packet and netdev marking should really be done in the bridge
driver with the switch driver only telling it which packets it already
forwarded. The bridge driver will mark such packets using the mark
assigned to the ingress bridge port and will prevent the packet from
being forwarded through any bridge port sharing the same mark (i.e.
having the same parent ID).

Remove the current switchdev 'offload_fwd_mark' implementation and
instead implement the proposed method. In addition, make rocker - the
sole user of the mark - use the proposed method.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26 13:13:36 -07:00
Nikolay Aleksandrov 1080ab95e3 net: bridge: add support for IGMP/MLD stats and export them via netlink
This patch adds stats support for the currently used IGMP/MLD types by the
bridge. The stats are per-port (plus one stat per-bridge) and per-direction
(RX/TX). The stats are exported via netlink via the new linkxstats API
(RTM_GETSTATS). In order to minimize the performance impact, a new option
is used to enable/disable the stats - multicast_stats_enabled, similar to
the recent vlan stats. Also in order to avoid multiple IGMP/MLD type
lookups and checks, we make use of the current "igmp" member of the bridge
private skb->cb region to record the type on Rx (both host-generated and
external packets pass by multicast_rcv()). We can do that since the igmp
member was used as a boolean and all the valid IGMP/MLD types are positive
values. The normal bridge fast-path is not affected at all, the only
affected paths are the flooding ones and since we make use of the IGMP/MLD
type, we can quickly determine if the packet should be counted using
cache-hot data (cb's igmp member). We add counters for:
* IGMP Queries
* IGMP Leaves
* IGMP v1/v2/v3 reports

* MLD Queries
* MLD Leaves
* MLD v1/v2 reports

These are invaluable when monitoring or debugging complex multicast setups
with bridges.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-30 06:18:24 -04:00
Eric Dumazet ae74f10068 bridge: update max_gso_segs and max_gso_size
It can be useful to lower max_gso_segs on NIC with very low
number of TX descriptors like bcmgenet.

However, this is defeated by bridge since it does not propagate
the lower value of max_gso_segs and max_gso_size.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-21 13:35:56 -04:00
Paolo Abeni 45493d47c3 bridge: notify enslaved devices of headroom changes
On bridge needed_headroom changes, the enslaved devices are
notified via the ndo_set_rx_headroom method

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-01 15:54:30 -05:00
David Decotigny 702b26a24d net: bridge: use __ethtool_get_ksettings
Signed-off-by: David Decotigny <decot@googlers.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-25 22:06:46 -05:00
Elad Raz 08474cc1e6 bridge: Propagate vlan add failure to user
Disallow adding interfaces to a bridge when vlan filtering operation
failed. Send the failure code to the user.

Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06 14:42:40 -05:00
Jiri Pirko 29bf24afb2 net: add possibility to pass information about upper device via notifier
Sometimes the drivers and other code would find it handy to know some
internal information about upper device being changed. So allow upper-code
to pass information down to notifier listeners during linking.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00
Jiri Pirko 6dffb0447c net: propagate upper priv via netdev_master_upper_dev_link
Eliminate netdev_master_upper_dev_link_private and pass priv directly as
a parameter of netdev_master_upper_dev_link.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03 11:49:25 -05:00
Jiri Pirko 56607386e8 bridge: defer switchdev fdb del call in fdb_del_external_learn
Since spinlock is held here, defer the switchdev operation. Also, ensure
that defered switchdev ops are processed before port master device
is unlinked.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15 06:09:50 -07:00
Nikolay Aleksandrov f409d0ed87 bridge: vlan: move back vlan_flush
Ido Schimmel reported a problem with switchdev devices because of the
order change of del_nbp operations, more specifically the move of
nbp_vlan_flush() which deletes all vlans and frees vlgrp after the
rx_handler has been unregistered. So in order to fix this move
vlan_flush back where it was and make it destroy the rhtable after
NULLing vlgrp and waiting a grace period to make sure noone can see it.

Reported-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13 04:57:58 -07:00
Nikolay Aleksandrov 263344e64c bridge: vlan: fix possible null ptr derefs on port init and deinit
When a new port is being added we need to make vlgrp available after
rhashtable has been initialized and when removing a port we need to
flush the vlans and free the resources after we're sure noone can use
the port, i.e. after it's removed from the port list and synchronize_rcu
is executed.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01 18:24:05 -07:00
Satish Ashok e10177abf8 bridge: multicast: fix handling of temp and perm entries
When the bridge (or port) is brought down/up flush only temp entries and
leave the perm ones. Flush perm entries only when deleting the bridge
device or the associated port.

Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20 12:49:10 -07:00
Nikolay Aleksandrov 1ea2d020ba bridge: vlan: flush the dynamically learned entries on port vlan delete
Add a new argument to br_fdb_delete_by_port which allows to specify a
vid to match when flushing entries and use it in nbp_vlan_delete() to
flush the dynamically learned entries of the vlan/port pair when removing
a vlan from a port. Before this patch only the local mac was being
removed and the dynamically learned ones were left to expire.
Note that the do_all argument is still respected and if specified, the
vid will be ignored.

Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24 05:40:55 -07:00
Venkat Venkatsubra 4c906c2798 bridge: reset bridge mtu after deleting an interface
On adding an interface br_add_if() sets the MTU to the min of
all the interfaces. Do the same thing on removing an interface too
in br_del_if.

Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14 19:12:38 -04:00
Florian Fainelli 8db0a2ee2c net: bridge: reject DSA-enabled master netdevices as bridge members
DSA-enabled master network devices with a switch tagging protocol should
strip the protocol specific format before handing the frame over to
higher layer.

When adding such a DSA master network device as a bridge member, we go
through the following code path when receiving a frame:

__netif_receive_skb_core
	-> first ptype check against ptype_all is not returning any
	   handler for this skb

	-> check and invoke rx_handler:
		-> deliver frame to the bridge layer: br_handle_frame

DSA registers a ptype handler with the fake ETH_XDSA ethertype, which is
called *after* the bridge-layer rx_handler has run. br_handle_frame()
tries to parse the frame it received from the DSA master network device,
and will not be able to match any of its conditions and jumps straight
at the end of the end of br_handle_frame() and returns
RX_HANDLER_CONSUMED there.

Since we returned RX_HANDLER_CONSUMED, __netif_receive_skb_core() stops
RX processing for this frame and returns NET_RX_SUCCESS, so we never get
a chance to call our switch tag packet processing logic and deliver
frames to the DSA slave network devices, and so we do not get any
functional bridge members at all.

Instead of cluttering the bridge receive path with DSA-specific checks,
and rely on assumptions about how __netif_receive_skb_core() is
processing frames, we simply deny adding the DSA master network device
(conduit interface) as a bridge member, leaving only the slave DSA
network devices to be bridge members, since those will work correctly in
all circumstances.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-19 15:45:10 -05:00
Toshiaki Makita f902e8812e bridge: Add ability to enable TSO
Currently a bridge device turns off TSO feature if no bridge ports
support it. We can always enable it, since packets can be segmented on
ports by software as well as on the bridge device.
This will reduce the number of packets processed in the bridge.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12 16:18:09 -05:00
Vlad Yasevich 5be5a2df40 bridge: Add filtering support for default_pvid
Currently when vlan filtering is turned on on the bridge, the bridge
will drop all traffic untill the user configures the filter.  This
isn't very nice for ports that don't care about vlans and just
want untagged traffic.

A concept of a default_pvid was recently introduced.  This patch
adds filtering support for default_pvid.   Now, ports that don't
care about vlans and don't define there own filter will belong
to the VLAN of the default_pvid and continue to receive untagged
traffic.

This filtering can be disabled by setting default_pvid to 0.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-05 21:21:37 -04:00
Florian Fainelli 775dd692bd net: bridge: add a br_set_state helper function
In preparation for being able to propagate port states to e.g: notifiers
or other kernel parts, do not manipulate the port state directly, but
instead use a helper function which will allow us to do a bit more than
just setting the state.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01 22:03:50 -04:00
Jiri Pirko 0f49579a39 bridge: switch order of rx_handler reg and upper dev link
The thing is that netdev_master_upper_dev_link calls
call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev). That generates rtnl
link message and during that, rtnl_link_ops->fill_slave_info is called.
But with current ordering, rx_handler and IFF_BRIDGE_PORT are not set
yet so there would have to be check for that in fill_slave_info callback.

Resolve this by reordering to similar what bonding and team does to
avoid the check.

Also add removal of IFF_BRIDGE_PORT flag into error path.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09 11:29:54 -07:00
Tom Gundersen c835a67733 net: set name_assign_type in alloc_netdev()
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert
all users to pass NET_NAME_UNKNOWN.

Coccinelle patch:

@@
expression sizeof_priv, name, setup, txqs, rxqs, count;
@@

(
-alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs)
+alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs)
|
-alloc_netdev_mq(sizeof_priv, name, setup, count)
+alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count)
|
-alloc_netdev(sizeof_priv, name, setup)
+alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup)
)

v9: move comments here from the wrong commit

Signed-off-by: Tom Gundersen <teg@jklm.no>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:12:48 -07:00
Toshiaki Makita e0a47d1f78 bridge: Fix incorrect judgment of promisc
br_manage_promisc() incorrectly expects br_auto_port() to return only 0
or 1, while it actually returns flags, i.e., a subset of BR_AUTO_MASK.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05 15:20:31 -07:00
wangweidong 019ee792d7 bridge: fix the unbalanced promiscuous count when add_if failed
As commit 2796d0c648 ("bridge: Automatically manage port
promiscuous mode."), make the add_if use dev_set_allmulti
instead of dev_set_promiscuous, so when add_if failed, we
should do dev_set_allmulti(dev, -1).

Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-01 22:05:16 -07:00
stephen hemminger 025559eec8 bridge: fix spelling of promiscuous
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18 21:10:08 -04:00
Vlad Yasevich 2796d0c648 bridge: Automatically manage port promiscuous mode.
There exist configurations where the administrator or another management
entity has the foreknowledge of all the mac addresses of end systems
that are being bridged together.

In these environments, the administrator can statically configure known
addresses in the bridge FDB and disable flooding and learning on ports.
This makes it possible to turn off promiscuous mode on the interfaces
connected to the bridge.

Here is why disabling flooding and learning allows us to control
promiscuity:
 Consider port X.  All traffic coming into this port from outside the
bridge (ingress) will be either forwarded through other ports of the
bridge (egress) or dropped.  Forwarding (egress) is defined by FDB
entries and by flooding in the event that no FDB entry exists.
In the event that flooding is disabled, only FDB entries define
the egress.  Once learning is disabled, only static FDB entries
provided by a management entity define the egress.  If we provide
information from these static FDBs to the ingress port X, then we'll
be able to accept all traffic that can be successfully forwarded and
drop all the other traffic sooner without spending CPU cycles to
process it.
 Another way to define the above is as following equations:
    ingress = egress + drop
 expanding egress
    ingress = static FDB + learned FDB + flooding + drop
 disabling flooding and learning we a left with
    ingress = static FDB + drop

By adding addresses from the static FDB entries to the MAC address
filter of an ingress port X, we fully define what the bridge can
process without dropping and can thus turn off promiscuous mode,
thus dropping packets sooner.

There have been suggestions that we may want to allow learning
and update the filters with learned addresses as well.  This
would require mac-level authentication similar to 802.1x to
prevent attacks against the hw filters as they are limited
resource.

Additionally, if the user places the bridge device in promiscuous mode,
all ports are placed in promiscuous mode regardless of the changes
to flooding and learning.

Since the above functionality depends on full static configuration,
we have also require that vlan filtering be enabled to take
advantage of this.  The reason is that the bridge has to be
able to receive and process VLAN-tagged frames and the there
are only 2 ways to accomplish this right now: promiscuous mode
or vlan filtering.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 17:06:33 -04:00
Vlad Yasevich f3a6ddf152 bridge: Introduce BR_PROMISC flag
Introduce a BR_PROMISC per-port flag that will help us track if the
current port is supposed to be in promiscuous mode or not.  For now,
always start in promiscuous mode.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 17:06:33 -04:00
Vlad Yasevich e028e4b8dc bridge: Keep track of ports capable of automatic discovery.
By default, ports on the bridge are capable of automatic
discovery of nodes located behind the port.  This is accomplished
via flooding of unknown traffic (BR_FLOOD) and learning the
mac addresses from these packets (BR_LEARNING).
If the above functionality is disabled by turning off these
flags, the port requires static configuration in the form
of static FDB entries to function properly.

This patch adds functionality to keep track of all ports
capable of automatic discovery.  This will later be used
to control promiscuity settings.

Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 17:06:33 -04:00
Eric W. Biederman a8779ec1c5 netpoll: Remove gfp parameter from __netpoll_setup
The gfp parameter was added in:
commit 47be03a28c
Author: Amerigo Wang <amwang@redhat.com>
Date:   Fri Aug 10 01:24:37 2012 +0000

    netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()

    slave_enable_netpoll() and __netpoll_setup() may be called
    with read_lock() held, so should use GFP_ATOMIC to allocate
    memory. Eric suggested to pass gfp flags to __netpoll_setup().

    Cc: Eric Dumazet <eric.dumazet@gmail.com>
    Cc: "David S. Miller" <davem@davemloft.net>
    Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
    Signed-off-by: Eric Dumazet <edumazet@google.com>
    Signed-off-by: Cong Wang <amwang@redhat.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

The reason for the gfp parameter was removed in:
commit c4cdef9b71
Author: dingtianhong <dingtianhong@huawei.com>
Date:   Tue Jul 23 15:25:27 2013 +0800

    bonding: don't call slave_xxx_netpoll under spinlocks

    The slave_xxx_netpoll will call synchronize_rcu_bh(),
    so the function may schedule and sleep, it should't be
    called under spinlocks.

    bond_netpoll_setup() and bond_netpoll_cleanup() are always
    protected by rtnl lock, it is no need to take the read lock,
    as the slave list couldn't be changed outside rtnl lock.

    Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
    Cc: Jay Vosburgh <fubar@us.ibm.com>
    Cc: Andy Gospodarek <andy@greyhouse.net>
    Signed-off-by: David S. Miller <davem@davemloft.net>

Nothing else that calls __netpoll_setup or ndo_netpoll_setup
requires a gfp paramter, so remove the gfp parameter from both
of these functions making the code clearer.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29 17:58:37 -04:00
Toshiaki Makita a4b816d8ba bridge: Change local fdb entries whenever mac address of bridge device changes
Vlan code may need fdb change when changing mac address of bridge device
even if it is caused by the mac address changing of a bridge port.

Example configuration:
  ip link set eth0 address 12:34:56:78:90:ab
  ip link set eth1 address aa:bb:cc:dd:ee:ff
  brctl addif br0 eth0
  brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab
  bridge vlan add dev br0 vid 10 self
  bridge vlan add dev eth0 vid 10
We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and
f->addr == 12:34:56:78:90:ab at this time.
Next, change the mac address of eth0 to greater value.
  ip link set eth0 address ee:ff:12:34:56:78
Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff.
However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not
able to communicate using br0 on vlan 10.

Address this issue by deleting and adding local entries whenever
changing the mac address of the bridge device.

If there already exists an entry that has the same address, for example,
in case that br_fdb_changeaddr() has already inserted it,
br_fdb_change_mac_address() will simply fail to insert it and no
duplicated entry will be made, as it was.

This approach also needs br_add_if() to call br_fdb_insert() before
br_stp_recalculate_bridge_id() so that we don't create an entry whose
dst == NULL in this function to preserve previous behavior.

Note that this is a slight change in behavior where the bridge device can
receive the traffic to the new address before calling
br_stp_recalculate_bridge_id() in br_add_if().
However, it is not a problem because we have already the address on the
new port and such a way to insert new one before recalculating bridge id
is taken in br_device_event() as well.

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-10 14:34:33 -08:00
WANG Cong b86f81cca9 bridge: move br_net_exit() to br.c
And it can become static.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13 23:42:39 -08:00
tanxiaojun 1a81a2e0db bridge: spelling fixes
Fix spelling errors in bridge driver.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18 17:53:22 -05:00
Ding Tianhong f873042093 bridge: flush br's address entry in fdb when remove the
bridge dev

When the following commands are executed:

brctl addbr br0
ifconfig br0 hw ether <addr>
rmmod bridge

The calltrace will occur:

[  563.312114] device eth1 left promiscuous mode
[  563.312188] br0: port 1(eth1) entered disabled state
[  563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects
[  563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G           O 3.12.0-0.7-default+ #9
[  563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[  563.468200]  0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8
[  563.468204]  ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8
[  563.468206]  ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78
[  563.468209] Call Trace:
[  563.468218]  [<ffffffff814d1c92>] dump_stack+0x6a/0x78
[  563.468234]  [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100
[  563.468242]  [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge]
[  563.468247]  [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge]
[  563.468254]  [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0
[  563.468259]  [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b
[  570.377958] Bridge firewalling registered

--------------------------- cut here -------------------------------

The reason is that when the bridge dev's address is changed, the
br_fdb_change_mac_address() will add new address in fdb, but when
the bridge was removed, the address entry in the fdb did not free,
the bridge_fdb_cache still has objects when destroy the cache, Fix
this by flushing the bridge address entry when removing the bridge.

v2: according to the Toshiaki Makita and Vlad's suggestion, I only
    delete the vlan0 entry, it still have a leak here if the vlan id
    is other number, so I need to call fdb_delete_by_port(br, NULL, 1)
    to flush all entries whose dst is NULL for the bridge.

Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Suggested-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20 15:31:11 -05:00
Toshiaki Makita b4e09b29c7 bridge: Fix memory leak when deleting bridge with vlan filtering enabled
We currently don't call br_vlan_flush() when deleting a bridge, which
leads to memory leak if br->vlan_info is allocated.

Steps to reproduce:
  while :
  do
    brctl addbr br0
    bridge vlan add dev br0 vid 10 self
    brctl delbr br0
  done
We can observe the cache size of corresponding slab entry
(as kmalloc-2048 in SLUB) is increased.

kmemleak output:
unreferenced object 0xffff8800b68a7000 (size 2048):
  comm "bridge", pid 2086, jiffies 4295774704 (age 47.656s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 48 9b 36 00 88 ff ff  .........H.6....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff815eb6ae>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff8116a1ca>] kmem_cache_alloc_trace+0xca/0x220
    [<ffffffffa03eddd6>] br_vlan_add+0x66/0xe0 [bridge]
    [<ffffffffa03e543c>] br_setlink+0x2dc/0x340 [bridge]
    [<ffffffff8150e481>] rtnl_bridge_setlink+0x101/0x200
    [<ffffffff8150d9d9>] rtnetlink_rcv_msg+0x99/0x260
    [<ffffffff81528679>] netlink_rcv_skb+0xa9/0xc0
    [<ffffffff8150d938>] rtnetlink_rcv+0x28/0x30
    [<ffffffff81527ccd>] netlink_unicast+0xdd/0x190
    [<ffffffff8152807f>] netlink_sendmsg+0x2ff/0x740
    [<ffffffff814e8368>] sock_sendmsg+0x88/0xc0
    [<ffffffff814e8ac8>] ___sys_sendmsg.part.14+0x298/0x2b0
    [<ffffffff814e91de>] __sys_sendmsg+0x4e/0x90
    [<ffffffff814e922e>] SyS_sendmsg+0xe/0x10
    [<ffffffff81601669>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 16:16:34 -05:00
Florian Fainelli fd094808a0 bridge: inherit slave devices needed_headroom
Some slave devices may have set a dev->needed_headroom value which is
different than the default one, most likely in order to prepend a
hardware descriptor in front of the Ethernet frame to send. Whenever a
new slave is added to a bridge, ensure that we update the
needed_headroom value accordingly to account for the slave
needed_headroom value.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29 15:17:09 -04:00
stephen hemminger 93d8bf9fb8 bridge: cleanup netpoll code
This started out with fixing a sparse warning, then I realized that
the wrapper function br_netpoll_info could just be collapsed away
by rolling it into the enable code.

Also, eliminate unnecessary goto's

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26 15:24:32 -07:00
Vlad Yasevich 867a59436f bridge: Add a flag to control unicast packet flood.
Add a flag to control flood of unicast traffic.  By default, flood is
on and the bridge will flood unicast traffic if it doesn't know
the destination.  When the flag is turned off, unicast traffic
without an FDB will not be forwarded to the specified port.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 02:04:32 -07:00
Vlad Yasevich 9ba18891f7 bridge: Add flag to control mac learning.
Allow user to control whether mac learning is enabled on the port.
By default, mac learning is enabled.  Disabling mac learning will
cause new dynamic FDB entries to not be created for a particular port.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-11 02:04:32 -07:00
David S. Miller 6e0895c2ea Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	drivers/net/ethernet/emulex/benet/be_main.c
	drivers/net/ethernet/intel/igb/igb_main.c
	drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
	include/net/scm.h
	net/batman-adv/routing.c
	net/ipv4/tcp_input.c

The e{uid,gid} --> {uid,gid} credentials fix conflicted with the
cleanup in net-next to now pass cred structs around.

The be2net driver had a bug fix in 'net' that overlapped with the VLAN
interface changes by Patrick McHardy in net-next.

An IGB conflict existed because in 'net' the build_skb() support was
reverted, and in 'net-next' there was a comment style fix within that
code.

Several batman-adv conflicts were resolved by making sure that all
calls to batadv_is_my_mac() are changed to have a new bat_priv first
argument.

Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO
rewrite in 'net-next', mostly overlapping changes.

Thanks to Stephen Rothwell and Antonio Quartulli for help with several
of these merge resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22 20:32:51 -04:00
stephen hemminger 8f3359bdc8 bridge: make user modified path cost sticky
Keep a STP port path cost value if it was set by a user.
Don't replace it with the link-speed based path cost
whenever the link goes down and comes back up.

Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15 14:03:44 -04:00
Eric Dumazet 4a0b5ec12f bridge: remove a redundant synchronize_net()
commit 00cfec3748 (net: add a synchronize_net() in
netdev_rx_handler_unregister())
allows us to remove the synchronized_net() call from del_nbp()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-02 12:10:58 -04:00
Vlad Yasevich bc9a25d21e bridge: Add vlan support for local fdb entries
When VLAN is added to the port, a local fdb entry for that port
(the entry with the mac address of the port) is added for that
VLAN.  This way we can correctly determine if the traffic
is for the bridge itself.  If the address of the port changes,
we try to change all the local fdb entries we have for that port.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 19:42:16 -05:00
Vlad Yasevich 407af3299e bridge: Add netlink interface to configure vlans on bridge ports
Add a netlink interface to add and remove vlan configuration on bridge port.
The interface uses the RTM_SETLINK message and encodes the vlan
configuration inside the IFLA_AF_SPEC.  It is possble to include multiple
vlans to either add or remove in a single message.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 19:41:46 -05:00
Vlad Yasevich 243a2e63f5 bridge: Add vlan filtering infrastructure
Adds an optional infrustructure component to bridge that would allow
native vlan filtering in the bridge.  Each bridge port (as well
as the bridge device) now get a VLAN bitmap.  Each bit in the bitmap
is associated with a vlan id.  This way if the bit corresponding to
the vid is set in the bitmap that the packet with vid is allowed to
enter and exit the port.

Write access the bitmap is protected by RTNL and read access
protected by RCU.

Vlan functionality is disabled by default.

Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 19:41:46 -05:00
Jiri Pirko 74fdd93fbc bridge: remove usage of netdev_set_master()
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04 13:31:50 -08:00
stephen hemminger 576eb62598 bridge: respect RFC2863 operational state
The bridge link detection should follow the operational state
of the lower device, rather than the carrier bit. This allows devices
like tunnels that are controlled by userspace control plane to work
with bridge STP link management.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-30 02:31:43 -08:00
Gao feng 9b1536c490 bridge: call br_netpoll_disable in br_add_if
When netdev_set_master faild in br_add_if, we should
call br_netpoll_disable to do some cleanup jobs,such
as free the memory of struct netpoll which allocated
in br_netpoll_enable.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-21 13:17:07 -08:00
Amerigo Wang d30362c071 bridge: add some comments for NETDEV_RELEASE
Add comments on why we don't notify NETDEV_RELEASE.

Cc: David Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14 14:33:31 -07:00
Amerigo Wang 47be03a28c netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup()
slave_enable_netpoll() and __netpoll_setup() may be called
with read_lock() held, so should use GFP_ATOMIC to allocate
memory. Eric suggested to pass gfp flags to __netpoll_setup().

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-14 14:33:30 -07:00
stephen hemminger 149ddd83a9 bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2)
This ensures that bridges created with brctl(8) or ioctl(2) directly
also carry IFLA_LINKINFO when dumped over netlink. This also allows
to create a bridge with ioctl(2) and delete it with RTM_DELLINK.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 21:12:32 -07:00
Michał Mirosław c8f44affb7 net: introduce and use netdev_features_t for device features sets
v2:	add couple missing conversions in drivers
	split unexporting netdev_fix_features()
	implemented %pNF
	convert sock::sk_route_(no?)caps

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16 17:43:10 -05:00