Commit Graph

245 Commits

Author SHA1 Message Date
H. Peter Anvin de65d816aa Merge remote-tracking branch 'origin/x86/boot' into x86/mm2
Coming patches to x86/mm2 require the changes and advanced baseline in
x86/boot.

Resolved Conflicts:
	arch/x86/kernel/setup.c
	mm/nobootmem.c

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-29 15:10:15 -08:00
Greg Kroah-Hartman a18e3690a5 X86: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitconst,
and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Shérab 88d67ee3ec arch/x86/platform/iris/iris.c: register a platform device and a platform driver
This makes the iris driver use the platform API, so it is properly exposed
in /sys.

[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout]
Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 15:02:11 -08:00
Linus Torvalds 11520e5e7c Revert "x86-64/efi: Use EFI to deal with platform wall clock (again)"
This reverts commit bd52276fa1 ("x86-64/efi: Use EFI to deal with
platform wall clock (again)"), and the two supporting commits:

  da5a108d05b4: "x86/kernel: remove tboot 1:1 page table creation code"

  185034e72d59: "x86, efi: 1:1 pagetable mapping for virtual EFI calls")

as they all depend semantically on commit 53b87cf088 ("x86, mm:
Include the entire kernel memory map in trampoline_pgd") that got
reverted earlier due to the problems it caused.

This was pointed out by Yinghai Lu, and verified by me on my Macbook Air
that uses EFI.

Pointed-out-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-15 15:20:41 -08:00
Linus Torvalds d42b3a2906 Merge branch 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 EFI update from Peter Anvin:
 "EFI tree, from Matt Fleming.  Most of the patches are the new efivarfs
  filesystem by Matt Garrett & co.  The balance are support for EFI
  wallclock in the absence of a hardware-specific driver, and various
  fixes and cleanups."

* 'core-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  efivarfs: Make efivarfs_fill_super() static
  x86, efi: Check table header length in efi_bgrt_init()
  efivarfs: Use query_variable_info() to limit kmalloc()
  efivarfs: Fix return value of efivarfs_file_write()
  efivarfs: Return a consistent error when efivarfs_get_inode() fails
  efivarfs: Make 'datasize' unsigned long
  efivarfs: Add unique magic number
  efivarfs: Replace magic number with sizeof(attributes)
  efivarfs: Return an error if we fail to read a variable
  efi: Clarify GUID length calculations
  efivarfs: Implement exclusive access for {get,set}_variable
  efivarfs: efivarfs_fill_super() ensure we clean up correctly on error
  efivarfs: efivarfs_fill_super() ensure we free our temporary name
  efivarfs: efivarfs_fill_super() fix inode reference counts
  efivarfs: efivarfs_create() ensure we drop our reference on inode on error
  efivarfs: efivarfs_file_read ensure we free data in error paths
  x86-64/efi: Use EFI to deal with platform wall clock (again)
  x86/kernel: remove tboot 1:1 page table creation code
  x86, efi: 1:1 pagetable mapping for virtual EFI calls
  x86, mm: Include the entire kernel memory map in trampoline_pgd
  ...
2012-12-14 10:08:40 -08:00
Linus Torvalds c6bd5bcc49 TTY/Serial merge for 3.8-rc1
Here's the big tty/serial tree set of changes for 3.8-rc1.
 
 Contained in here is a bunch more reworks of the tty port layer from Jiri and
 bugfixes from Alan, along with a number of other tty and serial driver updates
 by the various driver authors.
 
 Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the TTY
 layer, which is much appreciated by me.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHhgwACgkQMUfUDdst+ynI6wCcC+YeBwncnoWHvwLAJOwAZpUL
 bysAn28o780/lOsTzp3P1Qcjvo69nldo
 =hN/g
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...
2012-12-11 14:08:47 -08:00
Jacob Shin dda56e1340 x86, mm: Fixup code testing if a pfn is direct mapped
Update code that previously assumed pfns [ 0 - max_low_pfn_mapped ) and
[ 4GB - max_pfn_mapped ) were always direct mapped, to now look up
pfn_mapped ranges instead.

-v2: change applying sequence to keep git bisecting working.
     so add dummy pfn_range_is_mapped(). - Yinghai Lu

Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Link: http://lkml.kernel.org/r/1353123563-3103-12-git-send-email-yinghai@kernel.org
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-17 11:59:09 -08:00
Jan Beulich 5d6d578c17 x86, efi: Check table header length in efi_bgrt_init()
Header length should be validated for all ACPI tables before accessing
any non-header field.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/509A9E6002000078000A7079@nat28.tlf.novell.com
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-11-14 08:49:34 -08:00
Jan Beulich bd52276fa1 x86-64/efi: Use EFI to deal with platform wall clock (again)
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.

Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).

Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).

Also make the two EFI functions in question here static -
they're not being referenced elsewhere.

History:

    This commit was originally merged as bacef661ac ("x86-64/efi:
    Use EFI to deal with platform wall clock") but it resulted in some
    ASUS machines no longer booting due to a firmware bug, and so was
    reverted in f026cfa82f. A pre-emptive fix for the buggy ASUS
    firmware was merged in 03a1c254975e ("x86, efi: 1:1 pagetable
    mapping for virtual EFI calls") so now this patch can be
    reapplied.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com> [added commit history]
2012-10-30 10:39:20 +00:00
Matt Fleming 185034e72d x86, efi: 1:1 pagetable mapping for virtual EFI calls
Some firmware still needs a 1:1 (virt->phys) mapping even after we've
called SetVirtualAddressMap(). So install the mapping alongside our
existing kernel mapping whenever we make EFI calls in virtual mode.

This bug was discovered on ASUS machines where the firmware
implementation of GetTime() accesses the RTC device via physical
addresses, even though that's bogus per the UEFI spec since we've
informed the firmware via SetVirtualAddressMap() that the boottime
memory map is no longer valid.

This bug seems to be present in a lot of consumer devices, so there's
not a lot we can do about this spec violation apart from workaround
it.

Cc: JérômeCarretero <cJ-ko@zougloub.eu>
Cc: Vasco Dias <rafa.vasco@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2012-10-30 10:39:19 +00:00
Maxime Bizon d795991602 x86/ce4100: Fix reboot by forcing the reboot method to be KBD
The default reboot is via ACPI for this platform, and the CEFDK
bootloader actually supports this, but will issue a system power
off instead of a real reboot. Setting the reboot method to be
KBD instead of ACPI ensures proper system reboot.

Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Cc: rui.zhang@intel.com
Cc: alan@linux.intel.com
Link: http://lkml.kernel.org/r/1351518020-25556-3-git-send-email-ffainelli@freebox.fr
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-30 10:16:46 +01:00
Florian Fainelli f49f4ab95c x86/ce4100: Fix pm_poweroff
The CE4100 platform is currently missing a proper pm_poweroff
implementation leading to poweroff making the CPU spin forever
and the CE4100 platform does not enter a low-power mode where
the external Power Management Unit can properly power off the
system. Power off on this platform is implemented pretty much
like reboot, by writing to the SoC built-in 8051 microcontroller
mapped at I/O port 0xcf9, the value 0x4.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: rui.zhang@intel.com
Cc: alan@linux.intel.com
Link: http://lkml.kernel.org/r/1351518020-25556-2-git-send-email-ffainelli@freebox.fr
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-30 10:16:46 +01:00
Greg Kroah-Hartman ca364d8388 Merge 3.7-rc3 into tty-next
This merges the tty changes in 3.7-rc3 into tty-next

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-29 09:00:57 -07:00
Ingo Molnar 8b724e2a12 EFI updates for 3.7
Fix oops with EFI variables on mixed 32/64-bit firmware/kernels and
 document EFI git repository location on kernel.org.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQiatJAAoJEC84WcCNIz1VaCwP/RkNLYRGruxPFD0gf9ainwVQ
 qSXfpYLmpZeU+TcIBx6aG7PjzQsitvMU9YBtqvIN5uoYHuDjy2vDT52WBqg2Fn5k
 HYW13m/Pex+kCEpV4n6uYi9NM5mJeR/+QlpfQOcofxuqsvG6WUY1l55SF5+V/Dd/
 Dv94yO21JNiBumPM7KadFl5EIZ53j8OdQhEJB0jnomC0cDAWnbIHk97XPrSp6+rf
 03AQrYLnDNHq0HJo44LdoJleiRuxHBC6FrhCsrctvpVLd6iVNIGbJupNTBPvvAxl
 zY4aBoYym87uYo6y3LMevD+L2fkTC3qE6iQilYVbShkoYLnDTOnTCcuwUkRGQ/yX
 vBAHH/FNw2uUKSBeTdbA2/5OEctZ+GVEgkCkplAUfwJAxidyygBn9jD/YXHL+Fu+
 fDMvVnZTKbTQmOOP9cpYbebqAGykyST97HuDxOZ8mha5UP0QhCz5CbRfENdbP8w9
 00+hjEIkS0fjfjaSeCzp5tpkAVovzhZyoVZRCwoe42bZ7SAreDzNTYEnbK6G4owo
 x2mFXGlcTeZCmTNgQEmzby71tuAK+/+UEEXuoYV42wNda52iyvv7xkHJ/Q4li3um
 k0jjFFcqwd3mJC+OrJHr4LTCB1tvNgbpgsDUuUYckwPIIkWa7ZOF9xCWpiu2nC08
 4TI5A5DXf1n5i9sX4aw5
 =oM9H
 -----END PGP SIGNATURE-----

Merge tag 'efi-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fixes from Matt Fleming:

 "Fix oops with EFI variables on mixed 32/64-bit firmware/kernels and
  document EFI git repository location on kernel.org."

Conflicts:
	arch/x86/include/asm/efi.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-26 10:17:38 +02:00
Olof Johansson 5189c2a7c7 x86: efi: Turn off efi_enabled after setup on mixed fw/kernel
When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off
efi_enabled once setup is done. Beyond setup, it is normally used to
determine if runtime services are available and we will have none.

This will resolve issues stemming from efivars modprobe panicking on a
32/64-bit setup, as well as some reboot issues on similar setups.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991

Reported-by: Marko Kohtala <marko.kohtala@gmail.com>
Reported-by: Maxim Kammerer <mk@dee.su>
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: stable@kernel.org # 3.4 - 3.6
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2012-10-25 19:09:40 +01:00
Maxime Bizon 08ec212c0f x86: ce4100: allow second UART usage
The current CE4100 and 8250_pci code have both a limitation preventing the
registration and usage of CE4100's second UART. This patch changes the
platform code fixing up the UART port to work on a relative UART port
base address, as well as the 8250_pci code to make it register 2 UART ports
for CE4100 and pass the port index down to all consumers.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-24 11:34:51 -07:00
Matt Fleming 3e8fa263a9 x86/efi: Fix oops caused by incorrect set_memory_uc() usage
Calling __pa() with an ioremap'd address is invalid. If we
encounter an efi_memory_desc_t without EFI_MEMORY_WB set in
->attribute we currently call set_memory_uc(), which in turn
calls __pa() on a potentially ioremap'd address.

On CONFIG_X86_32 this results in the following oops:

  BUG: unable to handle kernel paging request at f7f22280
  IP: [<c10257b9>] reserve_ram_pages_type+0x89/0x210
  *pdpt = 0000000001978001 *pde = 0000000001ffb067 *pte = 0000000000000000
  Oops: 0000 [#1] PREEMPT SMP
  Modules linked in:

  Pid: 0, comm: swapper Not tainted 3.0.0-acpi-efi-0805 #3
   EIP: 0060:[<c10257b9>] EFLAGS: 00010202 CPU: 0
   EIP is at reserve_ram_pages_type+0x89/0x210
   EAX: 0070e280 EBX: 38714000 ECX: f7814000 EDX: 00000000
   ESI: 00000000 EDI: 38715000 EBP: c189fef0 ESP: c189fea8
   DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 0, ti=c189e000 task=c18bbe60 task.ti=c189e000)
  Stack:
   80000200 ff108000 00000000 c189ff00 00038714 00000000 00000000 c189fed0
   c104f8ca 00038714 00000000 00038715 00000000 00000000 00038715 00000000
   00000010 38715000 c189ff48 c1025aff 38715000 00000000 00000010 00000000
  Call Trace:
   [<c104f8ca>] ? page_is_ram+0x1a/0x40
   [<c1025aff>] reserve_memtype+0xdf/0x2f0
   [<c1024dc9>] set_memory_uc+0x49/0xa0
   [<c19334d0>] efi_enter_virtual_mode+0x1c2/0x3aa
   [<c19216d4>] start_kernel+0x291/0x2f2
   [<c19211c7>] ? loglevel+0x1b/0x1b
   [<c19210bf>] i386_start_kernel+0xbf/0xc8

The only time we can call set_memory_uc() for a memory region is
when it is part of the direct kernel mapping. For the case where
we ioremap a memory region we must leave it alone.

This patch reimplements the fix from e8c7106280 ("x86, efi:
Calling __pa() with an ioremap()ed address is invalid") which
was reverted in e1ad783b12 because it caused a regression on
some MacBooks (they hung at boot). The regression was caused
because the commit only marked EFI_RUNTIME_SERVICES_DATA as
E820_RESERVED_EFI, when it should have marked all regions that
have the EFI_MEMORY_RUNTIME attribute.

Despite first impressions, it's not possible to use
ioremap_cache() to map all cached memory regions on
CONFIG_X86_64 because of the way that the memory map might be
configured as detailed in the following bug report,

	https://bugzilla.redhat.com/show_bug.cgi?id=748516

e.g. some of the EFI memory regions *need* to be mapped as part
of the direct kernel mapping.

Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Huang Ying <huang.ying.caritas@gmail.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1350649546-23541-1-git-send-email-matt@console-pimps.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-24 12:48:47 +02:00
Josh Triplett 2223af3890 efi: Fix the ACPI BGRT driver for images located in EFI boot services memory
The ACPI BGRT driver accesses the BIOS logo image when it initializes.
However, ACPI 5.0 (which introduces the BGRT) recommends putting the
logo image in EFI boot services memory, so that the OS can reclaim that
memory.  Production systems follow this recommendation, breaking the
ACPI BGRT driver.

Move the bulk of the BGRT code to run during a new EFI late
initialization phase, which occurs after switching EFI to virtual mode,
and after initializing ACPI, but before freeing boot services memory.
Copy the BIOS logo image to kernel memory at that point, and make it
accessible to the BGRT driver.  Rework the existing ACPI BGRT driver to
act as a simple wrapper exposing that image (and the properties from the
BGRT) via sysfs.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/93ce9f823f1c1f3bb88bdd662cce08eee7a17f5d.1348876882.git.josh@joshtriplett.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29 12:21:03 -07:00
Josh Triplett 7bc90e01c3 efi: Add a function to look up existing IO memory mappings
The EFI initialization creates virtual mappings for EFI boot services
memory, so if a driver wants to access EFI boot services memory, it
cannot call ioremap itself; doing so will trip the WARN about mapping
RAM twice.  Thus, a driver accessing EFI boot services memory must do so
via the existing mapping already created during EFI intiialization.
Since the EFI code already maintains a memory map for that memory, add a
function efi_lookup_mapped_addr to look up mappings in that memory map.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/0eb48ae012797912874919110660ad420b90268b.1348876882.git.josh@joshtriplett.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29 12:21:02 -07:00
Josh Triplett 785107923a efi: Defer freeing boot services memory until after ACPI init
Some new ACPI 5.0 tables reference resources stored in boot services
memory, so keep that memory around until we have ACPI and can extract
data from it.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: http://lkml.kernel.org/r/baaa6d44bdc4eb0c58e5d1b4ccd2c729f854ac55.1348876882.git.josh@joshtriplett.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-09-29 12:21:01 -07:00
Seiji Aguchi d6cf86d8f2 efi: initialize efi.runtime_version to make query_variable_info/update_capsule workable
A value of efi.runtime_version is checked before calling
update_capsule()/query_variable_info() as follows.
But it isn't initialized anywhere.

<snip>
static efi_status_t virt_efi_query_variable_info(u32 attr,
                                                 u64 *storage_space,
                                                 u64 *remaining_space,
                                                 u64 *max_variable_size)
{
        if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
                return EFI_UNSUPPORTED;
<snip>

This patch initializes a value of efi.runtime_version at boot time.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2012-09-17 13:29:22 +01:00
H. Peter Anvin f026cfa82f Revert "x86-64/efi: Use EFI to deal with platform wall clock"
This reverts commit bacef661ac.

This commit has been found to cause serious regressions on a number of
ASUS machines at the least.  We probably need to provide a 1:1 map in
addition to the EFI virtual memory map in order for this to work.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Reported-and-bisected-by: Jérôme Carretero <cJ-ko@zougloub.eu>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120805172903.5f8bb24c@zougloub.eu
2012-08-14 09:58:25 -07:00
Andres Salomon 1fcfd08bd0 x86: OLPC: move s/r-related EC cmds to EC driver
The new EC driver calls platform-specific suspend and resume hooks; run
XO-1-specific EC commands from there, rather than deep in s/r code.  If we
attempt to run EC commands after the new EC driver has suspended, it is
refused by the ec->suspended checks.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:31 -04:00
Andres Salomon 6cca83d498 Platform: OLPC: move debugfs support from x86 EC driver
There's nothing about the debugfs interface for the EC driver that is
architecture-specific, so move it into the arch-independent driver.

The code is mostly unchanged with the exception of renamed variables, coding
style changes, and API updates.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:31 -04:00
Andres Salomon 85f90cf6ca x86: OLPC: switch over to using new EC driver on x86
This uses the new EC driver framework in drivers/platform/olpc.  The
XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff
(including a new workqueue; no more running EC commands with IRQs disabled!)
can be shared with other architectures.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:30 -04:00
Andres Salomon 3bf9428f22 drivers: OLPC: update various drivers to include olpc-ec.h
Switch over to using olpc-ec.h in multiple steps, so as not to break builds.
This covers every driver that calls olpc_ec_cmd().

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:29 -04:00
Andres Salomon 392a325c43 Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
The OLPC EC driver has outgrown arch/x86/platform/.  It's time to both
share common code amongst different architectures, as well as move it out
of arch/x86/.  The XO-1.75 is ARM-based, and the EC driver shares a lot of
code with the x86 code.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Paul Fox <pgf@laptop.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31 23:27:29 -04:00
Linus Torvalds 4cb38750d4 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/mm changes from Peter Anvin:
 "The big change here is the patchset by Alex Shi to use INVLPG to flush
  only the affected pages when we only need to flush a small page range.

  It also removes the special INVALIDATE_TLB_VECTOR interrupts (32
  vectors!) and replace it with an ordinary IPI function call."

Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next
to changed line)

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tlb: Fix build warning and crash when building for !SMP
  x86/tlb: do flush_tlb_kernel_range by 'invlpg'
  x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR
  x86/tlb: enable tlb flush range support for x86
  mm/mmu_gather: enable tlb flush range in generic mmu_gather
  x86/tlb: add tlb_flushall_shift knob into debugfs
  x86/tlb: add tlb_flushall_shift for specific CPU
  x86/tlb: fall back to flush all when meet a THP large page
  x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range
  x86/tlb_info: get last level TLB entry number of CPU
  x86: Add read_mostly declaration/definition to variables from smp.h
  x86: Define early read-mostly per-cpu macros
2012-07-26 13:17:17 -07:00
Linus Torvalds 0a2fe19ccc Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pul x86/efi changes from Ingo Molnar:
 "This tree adds an EFI bootloader handover protocol, which, once
  supported on the bootloader side, will make bootup faster and might
  result in simpler bootloaders.

  The other change activates the EFI wall clock time accessors on x86-64
  as well, instead of the legacy RTC readout."

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Handover Protocol
  x86-64/efi: Use EFI to deal with platform wall clock
2012-07-26 13:13:25 -07:00
Linus Torvalds 7100e505b7 Power management updates for 3.6
* ACPI conversion to PM handling based on struct dev_pm_ops.
 * Conversion of a number of platform drivers to PM handling based on struct
   dev_pm_ops and removal of empty legacy PM callbacks from a couple of PCI
   drivers.
 * Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 * cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti U Murthy.
 * cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 * Suspend and hibernate fixes from Srivatsa S. Bhat and Colin Cross.
 * Generic PM domains framework updates.
 * RTC CMOS wakeup signaling update from Paul Fox.
 * sparse warnings fixes from Sachin Kamat.
 * Build warnings fixes for the generic PM domains framework and PM sysfs code.
 * sysfs switch for printing device suspend times from Sameer Nanda.
 * Documentation fix from Oskar Schirmer.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJQDF5eAAoJEKhOf7ml8uNsEaAP/2wg4faoOGob5A0/7tLqG3Cw
 xnTmGsfL7wG07Q8ykCL1BSlBb1VeJz8L6LTmUpaABI4M//oIBlcYQKyCE0Tat1AO
 9bJXFzK7qcHMhkTz6d6LDqtVzR3NGM3ypjZqj8aEXBov07LMR1AXvgNwXXhv25zM
 0unwrh1XNinBN3n+oaktpWk1YHUjsa5IMU+2tQJrocuHXcgK30vGXZVrZ4g9w1c2
 eS+ED1oKUqOYtFzIUX+aCtaDDheGaPlugk/GOtIB7Sae0s0vMlxH/T5ncB4SxRC+
 v3s4OykqQc5Dc8+0bNlBH7ykSVNB0PoQiyKDY67CxtH+q1xQSc9/f3XJqnGMaVDE
 17eZUZsL4qSyzRuCbPCGAgwBHmx3qNCMu1i1BcmnSxU+ikPUeCR7mYOP0mRThwPH
 OSfs+c/vZ+Ow6CwVE4UFrbm9Jve7ADnCrlZzT2m6XjhHGyjKP7SJlzP9TPsZ0LRk
 oxgQDYHmxbo50t9tBCz5L4ZTMKkDp28e78x84/CteP85srcW3GqDxrPyp2uzJu5O
 tvIEBvVlc4ucq8sG83RkugQwrG/2cQwG2HO9ERAwq01HHA1BYsuU3A961Jqf5CZo
 nFRSnByvVj/imPf47OWpDPAbVEs7jxufJuLEbPwGj1MkttTGDBIRu3zldXt2S6kP
 Q4qYU6fDaQQHFc90pqxQ
 =vC4/
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:

 - ACPI conversion to PM handling based on struct dev_pm_ops.
 - Conversion of a number of platform drivers to PM handling based on
   struct dev_pm_ops and removal of empty legacy PM callbacks from a
   couple of PCI drivers.
 - Suspend-to-both for in-kernel hibernation from Bojan Smojver.
 - cpuidle fixes and cleanups from ShuoX Liu, Daniel Lezcano and Preeti
   Murthy.
 - cpufreq bug fixes from Jonghwa Lee and Stephen Boyd.
 - Suspend and hibernate fixes from Srivatsa Bhat and Colin Cross.
 - Generic PM domains framework updates.
 - RTC CMOS wakeup signaling update from Paul Fox.
 - sparse warnings fixes from Sachin Kamat.
 - Build warnings fixes for the generic PM domains framework and PM
   sysfs code.
 - sysfs switch for printing device suspend times from Sameer Nanda.
 - Documentation fix from Oskar Schirmer.

* tag 'pm-for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (70 commits)
  cpufreq: Fix sysfs deadlock with concurrent hotplug/frequency switch
  EXYNOS: bugfix on retrieving old_index from freqs.old
  PM / Sleep: call early resume handlers when suspend_noirq fails
  PM / QoS: Use NULL pointer instead of plain integer in qos.c
  PM / QoS: Use NULL pointer instead of plain integer in pm_qos.h
  PM / Sleep: Require CAP_BLOCK_SUSPEND to use wake_lock/wake_unlock
  PM / Sleep: Add missing static storage class specifiers in main.c
  cpuilde / ACPI: remove time from acpi_processor_cx structure
  cpuidle / ACPI: remove usage from acpi_processor_cx structure
  cpuidle / ACPI : remove latency_ticks from acpi_processor_cx structure
  rtc-cmos: report wakeups from interrupt handler
  PM / Sleep: Fix build warning in sysfs.c for CONFIG_PM_SLEEP unset
  PM / Domains: Fix build warning for CONFIG_PM_RUNTIME unset
  olpc-xo15-sci: Use struct dev_pm_ops for power management
  PM / Domains: Replace plain integer with NULL pointer in domain.c file
  PM / Domains: Add missing static storage class specifier in domain.c file
  PM / crypto / ux500: Use struct dev_pm_ops for power management
  PM / IPMI: Remove empty legacy PCI PM callbacks
  tpm_nsc: Use struct dev_pm_ops for power management
  tpm_tis: Use struct dev_pm_ops for power management
  ...
2012-07-22 13:36:52 -07:00
Linus Torvalds 2bd3488fcf Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/uv changes from Ingo Molnar:
 "UV2 BAU productization fixes.

  The BAU (Broadcast Assist Unit) is SGI's fancy out of line way on UV
  hardware to do TLB flushes, instead of the normal APIC IPI methods.
  The commits here fix / work around hangs in their latest hardware
  iteration (UV2).

  My understanding is that the main purpose of the out of line
  signalling channel is to improve scalability: the UV APIC hardware
  glue does not handle broadcasting to many CPUs very well, and this
  matters most for TLB shootdowns.

  [ I don't agree with all aspects of the current approach: in hindsight
    it would have been better to link the BAU at the IPI/APIC driver
    level instead of the TLB shootdown level, where TLB flushes are
    really just one of the uses of broadcast SMP messages.  Doing that
    would improve scalability in some other ways and it would also
    remove a few uglies from the TLB path.  It would also be nice to
    push more is_uv_system() tests into proper x86_init or x86_platform
    callbacks.  Cliff? ]"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/uv: Work around UV2 BAU hangs
  x86/uv: Implement UV BAU runtime enable and disable control via /proc/sgi_uv/
  x86/uv: Fix the UV BAU destination timeout period
2012-07-22 12:37:15 -07:00
Linus Torvalds bd3e57f913 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform changes from Ingo Molnar:
 "This tree mostly involves various APIC driver cleanups/robustization,
  and vSMP motivated platform callback improvements/cleanups"

Fix up trivial conflict due to printk cleanup right next to return value
change.

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  Revert "x86/early_printk: Replace obsolete simple_strtoul() usage with kstrtoint()"
  x86/apic/x2apic: Use multiple cluster members for the irq destination only with the explicit affinity
  x86/apic/x2apic: Limit the vector reservation to the user specified mask
  x86/apic: Optimize cpu traversal in __assign_irq_vector() using domain membership
  x86/vsmp: Fix vector_allocation_domain's return value
  irq/apic: Use config_enabled(CONFIG_SMP) checks to clean up irq_set_affinity() for UP
  x86/vsmp: Fix linker error when CONFIG_PROC_FS is not set
  x86/apic/es7000: Make apicid of a cluster (not CPU) from a cpumask
  x86/apic/es7000+summit: Always make valid apicid from a cpumask
  x86/apic/es7000+summit: Fix compile warning in cpu_mask_to_apicid()
  x86/apic: Fix ugly casting and branching in cpu_mask_to_apicid_and()
  x86/apic: Eliminate cpu_mask_to_apicid() operation
  x86/x2apic/cluster: Vector_allocation_domain() should return a value
  x86/apic/irq_remap: Silence a bogus pr_err()
  x86/vsmp: Ignore IOAPIC IRQ affinity if possible
  x86/apic: Make cpu_mask_to_apicid() operations check cpu_online_mask
  x86/apic: Make cpu_mask_to_apicid() operations return error code
  x86/apic: Avoid useless scanning thru a cpumask in assign_irq_vector()
  x86/apic: Try to spread IRQ vectors to different priority levels
  x86/apic: Factor out default vector_allocation_domain() operation
  ...
2012-07-22 12:19:36 -07:00
Rafael J. Wysocki 18468843fa olpc-xo15-sci: Use struct dev_pm_ops for power management
Make the OLPC XO15 SCI driver define its resume callback through
a struct dev_pm_ops object rather than by using a legacy PM hook
in struct acpi_device_ops.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
2012-07-12 22:36:28 +02:00
Alex Shi e7b52ffd45 x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range
x86 has no flush_tlb_range support in instruction level. Currently the
flush_tlb_range just implemented by flushing all page table. That is not
the best solution for all scenarios. In fact, if we just use 'invlpg' to
flush few lines from TLB, we can get the performance gain from later
remain TLB lines accessing.

But the 'invlpg' instruction costs much of time. Its execution time can
compete with cr3 rewriting, and even a bit more on SNB CPU.

So, on a 512 4KB TLB entries CPU, the balance points is at:
	(512 - X) * 100ns(assumed TLB refill cost) =
		X(TLB flush entries) * 100ns(assumed invlpg cost)

Here, X is 256, that is 1/2 of 512 entries.

But with the mysterious CPU pre-fetcher and page miss handler Unit, the
assumed TLB refill cost is far lower then 100ns in sequential access. And
2 HT siblings in one core makes the memory access more faster if they are
accessing the same memory. So, in the patch, I just do the change when
the target entries is less than 1/16 of whole active tlb entries.
Actually, I have no data support for the percentage '1/16', so any
suggestions are welcomed.

As to hugetlb, guess due to smaller page table, and smaller active TLB
entries, I didn't see benefit via my benchmark, so no optimizing now.

My micro benchmark show in ideal scenarios, the performance improves 70
percent in reading. And in worst scenario, the reading/writing
performance is similar with unpatched 3.4-rc4 kernel.

Here is the reading data on my 2P * 4cores *HT NHM EP machine, with THP
'always':

multi thread testing, '-t' paramter is thread number:
	       	        with patch   unpatched 3.4-rc4
./mprotect -t 1           14ns		24ns
./mprotect -t 2           13ns		22ns
./mprotect -t 4           12ns		19ns
./mprotect -t 8           14ns		16ns
./mprotect -t 16          28ns		26ns
./mprotect -t 32          54ns		51ns
./mprotect -t 128         200ns		199ns

Single process with sequencial flushing and memory accessing:

		       	with patch   unpatched 3.4-rc4
./mprotect		    7ns			11ns
./mprotect -p 4096  -l 8 -n 10240
			    21ns		21ns

[ hpa: http://lkml.kernel.org/r/1B4B44D9196EFF41AE41FDA404FC0A100BFF94@SHSMSX101.ccr.corp.intel.com
  has additional performance numbers. ]

Signed-off-by: Alex Shi <alex.shi@intel.com>
Link: http://lkml.kernel.org/r/1340845344-27557-3-git-send-email-alex.shi@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-06-27 19:29:07 -07:00
Cliff Wickman 8b6e511e51 x86/uv: Work around UV2 BAU hangs
On SGI's UV2 the BAU (Broadcast Assist Unit) driver can hang
under a heavy load. To cure this:

- Disable the UV2 extended status mode (see UV2_EXT_SHFT), as
  this mode changes BAU behavior in more ways then just delivering
  an extra bit of status.  Revert status to just two meaningful bits,
  like UV1.

- Use no IPI-style resets on UV2.  Just give up the request for
  whatever the reason it failed and let it be accomplished with
  the legacy IPI method.

- Use no alternate sending descriptor (the former UV2 workaround
  bcp->using_desc and handle_uv2_busy() stuff).  Just disable the
  use of the BAU for a period of time in favor of the legacy IPI
  method when the h/w bug leaves a descriptor busy.

  -- new tunable: giveup_limit determines the threshold at which a hub is
     so plugged that it should do all requests with the legacy IPI method for a
     period of time
  -- generalize disable_for_congestion() (renamed disable_for_period()) for
     use whenever a hub should avoid using the BAU for a period of time

Also:

 - Fix find_another_by_swack(), which is part of the UV2 bug workaround

 - Correct and clarify the statistics (new stats s_overipilimit, s_giveuplimit,
   s_enters, s_ipifordisabled, s_plugged, s_congested)

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120622131459.GC31884@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-25 14:45:05 +02:00
Cliff Wickman 26ef85770c x86/uv: Implement UV BAU runtime enable and disable control via /proc/sgi_uv/
This patch enables the BAU to be turned on or off dynamically.

  echo "on"  > /proc/sgi_uv/ptc_statistics
  echo "off" > /proc/sgi_uv/ptc_statistics

The system may be booted with or without the nobau option.

Whether the system currently has the BAU off can be seen in
the /proc file -- normally with the baustats script.
Each cpu will have a 1 in the bauoff field if the BAU was turned
off, so baustats will give a count of cpus that have it off.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120622131330.GB31884@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-25 14:45:04 +02:00
Cliff Wickman 11cab711f6 x86/uv: Fix the UV BAU destination timeout period
Correct the calculation of a destination timeout period, which
is used to distinguish between a destination timeout and the
situation where all the target software ack resources are full
and a request is returned immediately.

The problem is that integer arithmetic was overflowing, yielding
a very large result.

Without this fix destination timeouts are identified as resource
'plugged' events and an ipi method of resource releasing is
unnecessarily employed.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Link: http://lkml.kernel.org/r/20120622131212.GA31884@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-25 14:45:04 +02:00
Kay Sievers e2ae715d66 kmsg - kmsg_dump() use iterator to receive log buffer content
Provide an iterator to receive the log buffer content, and convert all
kmsg_dump() users to it.

The structured data in the kmsg buffer now contains binary data, which
should no longer be copied verbatim to the kmsg_dump() users.

The iterator should provide reliable access to the buffer data, and also
supports proper log line-aware chunking of data while iterating.

Signed-off-by: Kay Sievers <kay@vrfy.org>
Tested-by: Tony Luck <tony.luck@intel.com>
Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-15 14:53:59 -07:00
Ingo Molnar 879060d574 Merge branch 'x86/cleanups' into x86/apic
Merge in the cleanups because a followup x86/apic change relies on them.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-15 14:17:01 +02:00
Alexander Gordeev a5a391561b x86/apic: Eliminate cpu_mask_to_apicid() operation
Since there are only two locations where cpu_mask_to_apicid() is
called from, remove the operation and use only
cpu_mask_to_apicid_and() instead.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Suggested-and-acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120614074935.GE3383@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-14 12:53:13 +02:00
Cliff Wickman d5d2d2eea8 x86/uv: Fix UV2 BAU legacy mode
The SGI Altix UV2 BAU (Broadcast Assist Unit) as used for
tlb-shootdown (selective broadcast mode) always uses UV2
broadcast descriptor format. There is no need to clear the
'legacy' (UV1) mode, because the hardware always uses UV2 mode
for selective broadcast.

But the BIOS uses general broadcast and legacy mode, and the
hardware pays attention to the legacy mode bit for general
broadcast. So the kernel must not clear that mode bit.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/E1SccoO-0002Lh-Cb@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-08 11:48:28 +02:00
Alexander Gordeev ff16432412 x86/apic: Make cpu_mask_to_apicid() operations return error code
Current cpu_mask_to_apicid() and cpu_mask_to_apicid_and()
implementations have few shortcomings:

1. A value returned by cpu_mask_to_apicid() is written to
hardware registers unconditionally. Should BAD_APICID get ever
returned it will be written to a hardware too. But the value of
BAD_APICID is not universal across all hardware in all modes and
might cause unexpected results, i.e. interrupts might get routed
to CPUs that are not configured to receive it.

2. Because the value of BAD_APICID is not universal it is
counter- intuitive to return it for a hardware where it does not
make sense (i.e. x2apic).

3. cpu_mask_to_apicid_and() operation is thought as an
complement to cpu_mask_to_apicid() that only applies a AND mask
on top of a cpumask being passed. Yet, as consequence of 18374d8
commit the two operations are inconsistent in that of:
  cpu_mask_to_apicid() should not get a offline CPU with the cpumask
  cpu_mask_to_apicid_and() should not fail and return BAD_APICID
These limitations are impossible to realize just from looking at
the operations prototypes.

Most of these shortcomings are resolved by returning a error
code instead of BAD_APICID. As the result, faults are reported
back early rather than possibilities to cause a unexpected
behaviour exist (in case of [1]).

The only exception is setup_timer_IRQ0_pin() routine. Although
obviously controversial to this fix, its existing behaviour is
preserved to not break the fragile check_timer() and would
better addressed in a separate fix.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20120607131559.GF4759@dhcp-26-207.brq.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-08 11:44:29 +02:00
Sebastian Andrzej Siewior 7071f6b288 x86/intel/moorestown: Change intel_scu_devices_create() to __devinit
The allmodconfig hits:

 WARNING: vmlinux.o(.text+0x6553d): Section mismatch in
          reference from the function intel_scu_devices_create() to the
          function .devinit.text: spi_register_board_info()
	  [...]

This patch marks intel_scu_devices_create() as devinit because
it only calls a devinit function, spi_register_board_info().

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/20120531212025.GA8519@breakpoint.cc
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06 11:58:40 +02:00
Jan Beulich bacef661ac x86-64/efi: Use EFI to deal with platform wall clock
Other than ix86, x86-64 on EFI so far didn't set the
{g,s}et_wallclock accessors to the EFI routines, thus
incorrectly using raw RTC accesses instead.

Simply removing the #ifdef around the respective code isn't
enough, however: While so far early get-time calls were done in
physical mode, this doesn't work properly for x86-64, as virtual
addresses would still need to be set up for all runtime regions
(which wasn't the case on the system I have access to), so
instead the patch moves the call to efi_enter_virtual_mode()
ahead (which in turn allows to drop all code related to calling
efi-get-time in physical mode).

Additionally the earlier calling of efi_set_executable()
requires the CPA code to cope, i.e. during early boot it must be
avoided to call cpa_flush_array(), as the first thing this
function does is a BUG_ON(irqs_disabled()).

Also make the two EFI functions in question here static -
they're not being referenced elsewhere.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FBFBF5F020000780008637F@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-06 11:48:05 +02:00
Jiang Liu f841d792e3 x86: Return IRQ_SET_MASK_OK_NOCOPY from irq affinity functions
The interrupt chip irq_set_affinity() functions copy the affinity mask
to irq_data->affinity but return 0, i.e. IRQ_SET_MASK_OK.
IRQ_SET_MASK_OK causes the core code to do another redundant copy.

Return IRQ_SET_MASK_OK_NOCOPY to avoid this.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Cliff Wickman <cpw@sgi.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Keping Chen <chenkeping@huawei.com>
Link: http://lkml.kernel.org/r/1333120296-13563-4-git-send-email-jiang.liu@huawei.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-24 23:16:33 +02:00
Linus Torvalds 44bc40e148 Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform changes from Ingo Molnar:
 "This tree includes assorted platform driver updates and a preparatory
  series for a platform with custom DMA remapping semantics (sta2x11 I/O
  hub)."

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsmp: Fix number of CPUs when vsmp is disabled
  keyboard: Use BIOS Keyboard variable to set Numlock
  x86/olpc/xo1/sci: Report RTC wakeup events
  x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
  x86, platform: Initial support for sta2x11 I/O hub
  x86: Introduce CONFIG_X86_DMA_REMAP
  x86-32: Introduce CONFIG_X86_DEV_DMA_OPS
2012-05-23 11:16:40 -07:00
Michael S. Tsirkin c8f64bf7df x86/apic: Fix typo EIO_ACK -> EOI_ACK and document it
Fix typo in the macro name and document the
reason it has this value. Update users.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: gleb@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/37867b31b9330690af2e60a2a7c4cb4b1b070caf.1337184153.git.mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18 09:46:07 +02:00
Daniel Drake c2c21e9bb1 x86/olpc/xo1/sci: Report RTC wakeup events
When the system is woken due to a RTC event, report the wakeup
event on the relevant rtc device (if it can be found).

Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: dilinger@queued.net
Cc: pgf@laptop.org
Link: http://lkml.kernel.org/r/20120418223402.D73249D401E@zog.reactivated.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 15:02:26 +02:00
Daniel Drake d2aa37411b x86/olpc/xo1/sci: Produce wakeup events for buttons and switches
Produce wakeup events for the XO-1's power button, lid switch
and ebook switch, taking care to only produce events when the
states have changed.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: dilinger@queued.net
Cc: pgf@laptop.org
Link: http://lkml.kernel.org/r/20120412171824.D14C49D401E@zog.reactivated.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 15:02:25 +02:00
Bjarke Istrup Pedersen d1d0589a56 arch/x86/platform/geode/net5501.c: change active_low to 0 for LED driver
It seems that there was an error with the active_low = 1 for the
LED, since it should be set to 0 (meaning that active is high,
since 0 is false, hence the confusion.

The wiki article about it confuses it, since it contradicts itself,
regarding what turns on the LED.

I have tested 3.4-rc2 on my net5501 with this patch, and it makes the LED
behave correctly, where "none" turns it off, and "default-on" turns it on,
when echoed onto the trigger "file" in /sys/class/leds.

Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org>
Link: http://lkml.kernel.org/r/20120504210146.62186A018B@akpm.mtv.corp.google.com
Cc: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-05-04 14:40:07 -07:00