The V4L2_INPUT_TYPE_CAMERA and V4L2_OUTPUT_TYPE_ANALOG descriptions were
hopelessly out of date. Fix this, and also fix a few style issues in these
documents. Finally add the missing documentation for V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY
(only used by the zoran driver).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the line "Camera sensors are also considered to be a video input."
In practice all non-MC drivers for sensors support the input ioctls, and the
compliance test actually tests for the presence of these ioctls. So clarify
the documentation by explicitly mentioning sensors.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document the new cec_get_drvdata() helper function.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for added Bus Formats to describe RGB and YUV formats used
as input to the Synopsys DesignWare HDMI TX Controller.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491230558-10804-4-git-send-email-narmstrong@baylibre.com
LIRC_MODE_MODE2 and LIRC_MODE_LIRCCODE were not covered at all.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CEC documentation added two sections on the main media kAPI level.
There should be only one.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Skipping, which is sometimes used in terminology related to sensors when
referring to sub-sampling is replaced by more suitable sub-sampling
instead. Skipping is retained in a note in parentheses.
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Even when the CEC device is unconfigured due to an invalid physical
address it is still allowed to send a message from 0xf (Unregistered)
to 0 (TV). This is a corner case explicitly allowed by the CEC specification.
Document this corner case.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document all the various error codes returned by the CEC ioctls.
These were never documented, instead the documentation relied on a reference
to the generic error codes, but that's not sufficient.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fixed a few spelling mistakes, but mostly incorrect rst syntax that caused wrong
references or font style.
No actual documentation changes, just fixes.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The xvYCC601/709 encodings were mapped by default to full range quantization.
This is actually wrong since these encodings use limited range quantization,
but accept values outside of the limited range.
This makes sense since for values within the limited range it behaves exactly
the same as BT.601 or Rec. 709. The only difference is that with the xvYCC
encodings the values outside of the limited range also produce value colors.
Talking to people who know a lot more about this than I do made me realize
that mapping xvYCC to full range quantization was wrong, so this patch corrects
this and also improves the documentation.
These formats are very rare, and since the formula for decoding these Y'CbCr
encodings is actually fixed and independent of the quantization field value
it is safe to make this change.
The main advantage is that keeps the V4L2 specification in sync with the
corresponding colorspace, HDMI and CEA861 standards when it comes to these
xvYCC formats.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that we have an extension to handle images, use it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----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=tZdW
-----END PGP SIGNATURE-----
Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A few fixes for the docs tree, including one for a 4.11 build
regression"
* tag 'docs-4.11-fixes' of git://git.lwn.net/linux:
Documentation/sphinx: fix primary_domain configuration
docs: Fix htmldocs build failure
doc/ko_KR/memory-barriers: Update control-dependencies section
pcieaer doc: update the link
Documentation: Update path to sysrq.txt
Commit 9d85025b04 ("docs-rst: create an user's manual book") moved the
sysrq.txt leaving old paths in the kernel docs.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The new picture_aspect, cea861_vic and hdmi_vic fields were not documented,
even though the corresponding flags were.
Add documentation for these new fields.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It allows to simulate the behavior of hardware with such limitations or
to connect vivid to real hardware with such limitations.
Add the "allocators" module parameter option to let vivid use the
dma-contig instead of vmalloc.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix typos and add the following to the scripts/spelling.txt:
an union||a union
Link: http://lkml.kernel.org/r/1481573103-11329-5-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos and add the following to the scripts/spelling.txt:
an user||a user
an userspace||a userspace
I also added "userspace" to the list since it is a common word in Linux.
I found some instances for "an userfaultfd", but I did not add it to the
list. I felt it is endless to find words that start with "user" such as
"userland" etc., so must draw a line somewhere.
Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Three more DocBook template files have been converted to RST; only 21 to
go. There are various build improvements and the usual array of
documentation improvements and fixes.
-----BEGIN PGP SIGNATURE-----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=C5nd
-----END PGP SIGNATURE-----
Merge tag 'docs-4.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A slightly quieter cycle for documentation this time around.
Three more DocBook template files have been converted to RST; only 21
to go. There are various build improvements and the usual array of
documentation improvements and fixes"
* tag 'docs-4.11' of git://git.lwn.net/linux: (44 commits)
docs / driver-api: Fix structure references in device_link.rst
PM / docs: Fix structure references in device.rst
Add a target to check broken external links in the Documentation
Documentation: Fix linux-api list typo
Documentation: DocBook/Makefile comment typo
Improve sparse documentation
Documentation: make Makefile.sphinx no-ops quieter
Documentation: DMA-ISA-LPC.txt
Documentation: input: fix path to input code definitions
docs: Remove the copyright year from conf.py
docs: Fix a warning in the Korean HOWTO.rst translation
PM / sleep / docs: Convert PM notifiers document to reST
PM / core / docs: Convert sleep states API document to reST
PM / core: Update kerneldoc comments in pm.h
doc-rst: Fix recursive make invocation from macros
doc-rst: Delete output of failed dot-SVG conversion
doc-rst: Break shell command sequences on failure
Documentation/sphinx: make targets independent of Sphinx work for HAVE_SPHINX=0
doc-rst: fixed cleandoc target when used with O=dir
Documentation/sphinx: prevent generation of .pyc files in the source tree
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYqh1gAAoJEHm+PkMAQRiGMlYH/A1GkDfcx5wmdc6wuMit2vim
O/8aGsq2m+TyfjNmMR51nXroZaziW/zTtOyiBgaEEK9HAuEJhd1omq6TvLbeIoF2
QBQKUsu06jsxtYazm91XOCHBHy0uKunkSsv+NmAWBOGVtkja3pzn+qAFsfqNAx5Y
CTwNR1/fasA8OgXMRyhC3dcatY2iwXkVZ7BSut0Umcug3D69V8GbCDjqZg5hmlD2
v8yk7i58CtKezKK9pBHAE5qQyFTl5T77paLB49sLZ9PQU33uafSOm8spxzO4Z1Is
8QyHyUtdcJStRCPeOgOlFGjB+WpOKHXDA1LjshhC0P9U6AmU+hR0X5wSx8dp1s4=
=Tjmr
-----END PGP SIGNATURE-----
Merge tag 'v4.10' into patchwork
Linux 4.10
* tag 'v4.10': (1558 commits)
Linux 4.10
Fix missing sanity check in /dev/sg
scsi: don't BUG_ON() empty DMA transfers
ipv6: release dst on error in ip6_dst_lookup_tail
printk: use rcuidle console tracepoint
ARM: multi_v7_defconfig: enable Qualcomm RPMCC
irda: Fix lockdep annotations in hashbin_delete().
vxlan: fix oops in dev_fill_metadata_dst
dccp: fix freeing skb too early for IPV6_RECVPKTINFO
dpaa_eth: small leak on error
packet: Do not call fanout_release from atomic contexts
reset: fix shared reset triggered_count decrement on error
ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly
ntb_transport: Pick an unused queue
ntb: ntb_perf missing dmaengine_unmap_put
NTB: ntb_transport: fix debugfs_remove_recursive
Revert "nohz: Fix collision between tick and other hrtimers"
vfs: fix uninitialized flags in splice_to_pipe()
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
...
Documentation shouldn't have broken links.
sphinx linkcheck builder scans all documents for external links, tries
to open them with urllib2, and writes an overview which ones are broken
and redirected to standard output and to output.txt in the output
directory.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rémy Léone <remy.leone@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This reverts 'commit 7e0739cd9c ("[media] videodev2.h: fix
sYCC/AdobeYCC default quantization range").
The problem is that many drivers can convert R'G'B' content (often
from sensors) to Y'CbCr, but they all produce limited range Y'CbCr.
To stay backwards compatible the default quantization range for
sRGB and AdobeRGB Y'CbCr encoding should be limited range, not full
range, even though the corresponding standards specify full range.
Update the V4L2_MAP_QUANTIZATION_DEFAULT define accordingly and
also update the documentation.
Fixes: 7e0739cd9c ("[media] videodev2.h: fix sYCC/AdobeYCC default quantization range")
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.9 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we use redirection to create the SVG file, even a failed conversion
will create the file and 'make' will consider it up-to-date if the
build is retried. We should delete it in case of failure.
Fixes: ec868e4ee2 ("docs-rst: media: build SVG from graphviz files")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document the EIO error since this can happen anywhere anytime and applications
should be aware of this.
Also fix typo: exaustive -> exhaustive
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
For IR wakeup, a driver has to program the hardware to wakeup at a
specific IR sequence, so it makes no sense to allow multiple wakeup
protocols to be selected. In the same manner the sysfs interface only
allows one scancode to be provided.
In addition, we need to know the specific variant of the protocol.
In short, these changes are made to the wakeup_protocols sysfs entry:
- list all the protocol variants rather than the protocol groups,
e.g. "nec nec-x nec-32" rather than just "nec".
- only allow one protocol variant to be selected rather than multiple
- wakeup_filter can only be set once a protocol has been selected in
wakeup_protocols.
This is an API change, however the only user of this API is the img-ir,
but the wakeup code was never merged to mainline, so it was never used.
Signed-off-by: Sean Young <sean@mess.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sifan Naeem <sifan.naeem@imgtec.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Mention where to find the CEC utilities.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The API is now finalized, so this notice should be dropped.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The media_entity_pipeline_start() and media_entity_pipeline_stop()
functions are renamed as media_pipeline_start() and media_pipeline_stop(),
respectively. The reason is two-fold: the pipeline struct is, rightly,
already called media_pipeline (rather than media_entity_pipeline) and what
this really is about is a pipeline. A pipeline consists of entities ---
and, well, other objects embedded in these entities.
As the pipeline object will be in the future moved from entities to pads
in order to support multiple pipelines through a single entity, do the
renaming now.
Similarly, functions operating on struct media_entity_graph as well as the
struct itself are renamed by dropping the "entity_" part from the prefix
of the function family and the data structure. The graph traversal which
is what the functions are about is not specifically about entities only
and will operate on pads for the same reason as the media pipeline.
The patch has been generated using the following command:
git grep -l media_entity |xargs perl -i -pe '
s/media_entity_pipeline/media_pipeline/g;
s/media_entity_graph/media_graph/g'
And a few manual edits related to line start alignment and line wrapping.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* patchwork: (496 commits)
[media] v4l: tvp5150: Add missing break in set control handler
[media] v4l: tvp5150: Don't inline the tvp5150_selmux() function
[media] v4l: tvp5150: Compile tvp5150_link_setup out if !CONFIG_MEDIA_CONTROLLER
[media] em28xx: don't store usb_device at struct em28xx
[media] em28xx: use usb_interface for dev_foo() calls
[media] em28xx: don't change the device's name
[media] mn88472: fix chip id check on probe
[media] mn88473: fix chip id check on probe
[media] lirc: fix error paths in lirc_cdev_add()
[media] s5p-mfc: Add support for MFC v8 available in Exynos 5433 SoCs
[media] s5p-mfc: Rework clock handling
[media] s5p-mfc: Don't keep clock prepared all the time
[media] s5p-mfc: Kill all IS_ERR_OR_NULL in clocks management code
[media] s5p-mfc: Remove dead conditional code
[media] s5p-mfc: Ensure that clock is disabled before turning power off
[media] s5p-mfc: Remove special clock rate management
[media] s5p-mfc: Use printk_ratelimited for reporting ioctl errors
[media] s5p-mfc: Set DMA_ATTR_ALLOC_SINGLE_PAGES
[media] vivid: Set color_enc on HSV formats
[media] v4l2-tpg: Init hv_enc field with a valid value
...
This corrects a set of spelling mistakes, probably from an
automated conversion.
Signed-off-by: Sanjeev Gupta <ghane0@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The builddir prefix was missing on make cleandocs. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Better organize the media/Makefile, in order to better
split what's related to image conversion from the ones
related to parse-headers.pl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Instead of keeping both SVG and graphviz files, dynamically
build SVG from its graphviz sources.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
SVG images are scalable, with makes easier to output on
different formats.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
bitmap images don't scale too well. So, replace it by a SVG
image, written in inkscape. I'm using the 2009's temporary
logo.svg image from 8032b526d1 ("linux.conf.au 2009: Tuz"),
with a Tasmanian Devil wearing a tux mask.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The pipeline image was produced from some dot file that has
long missed. Create a pipeline.dot with the graph and convert
it to SVG. As we're planning to add future support for graphviz
graphics, also store the .dot file on the tree, as this will
make easier when we add such Sphinx extension.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Instead of using bitmap images to show the zigzag macroblock
parsing, replace it by a SVG ones, with is scalable.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Use sans-serif font on all documents, split text lines,
ungroup elements, and do other misc cleanups, in order to make
all of them to look better, and to have smaller columns inside
their lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Using vectorial graphics provide a better visual. As those images
are originally using a vectorial graphics input at the pdf files,
use them, from an old media tree repository, converting them to SVG.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.
Drop the cec_devnode parent field, since devnode.dev.parent can be used
instead.
This change makes the framework consistent with other frameworks where the
parent device is not used until the device is registered.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The documentation simply mentioned that one of the four pixel orders was
used in the example. Now specify the exact pixelformat instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The formats added by this patch are:
V4L2_PIX_FMT_SBGGR16
V4L2_PIX_FMT_SGBRG16
V4L2_PIX_FMT_SGRBG16
V4L2_PIX_FMT_SRGGB16 already existed before the patch. Rework the
documentation to match that of the other sample depths.
Also align the description of V4L2_PIX_FMT_SRGGB16 to match with other
similar formats.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a typo on a word inside it.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document the interface between the CSI-2 transmitter and receiver drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The SVG files are larger than the draw dimentions, have long
lines and aren't cleaned. Use inkscape to automatically fix
those issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Somehow, two DVB headers were included twice. Remove the
duplication
Reported-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Recent Makefile changes added an rm command without the requisite "-f",
leading to warnings if the files do not exist. Make it be quiet again.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The PDF files that contain media images were actually generated
offline from their SVG or PNG source files.
Sphinx can handle PNG sources automatially. So, let's just
drop their PDF counterparts.
For SVG, however, Sphinx doesn't produce the right tags to
use the TexLive SVG support. Also, the SVG support is done via
shell execution, with is not nice.
So, while we don't have any support for SVG inside Sphinx
core or as an extension, move the logic to build them to Makefile,
producing the PDF images on runtime.
NOTE: due to the way Sphinx works, the PDF images should be
generated inside the Kernel source tree, as otherwise Sphinx
won't find it, not obeying what's specified by "O=" makefile
parameter.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Right now, media is using two different formats for bitmap
images: GIF and PNG. Let's use just one, to make it simpler when
building with Sphinx.
As PNG is usually better than GIF, let's use it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
SVG images are nicer, as they can easily be scaled. Also, they're
written in text, with makes easier to work.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are several missing columns on the size specification,
causing LaTeX to complain on interactive mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
adjustbox doesn't work on longtables. Also, this
causes an error on LaTeX in interactive mode.
So, use, instead, a tiny font.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
PDF build on Kernel 4.9-rc? returns an error with Sphinx 1.3.x
and Sphinx 1.4.x, when trying to solve some cross-references.
The solution is to redefine the \DURole macro.
However, this is redefined too late. Move such redefinition to
LaTeX preamble and bind it to just the Sphinx versions where the
error is known to be present.
Tested by building the documentation on interactive mode:
make PDFLATEX=xelatex -C Documentation/output/./latex
Fixes: e61a39baf7 ("[media] index.rst: Fix LaTeX error in interactive mode on Sphinx 1.4.x")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The FDP1 driver performs advanced de-interlacing on a memory 2 memory
based video stream, and supports conversion from YCbCr/YUV
to RGB pixel formats
Signed-off-by: Kieran Bingham <kieran+renesas@bingham.xyz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The menu control selects the operation mode of a video deinterlacer. The
menu entries are driver specific.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CEC_LOG_ADDRS_FL_CDC_ONLY flag is missing at the documentation,
causing this warning:
Documentation/output/cec.h.rst:6: WARNING: undefined label: cec-log-addrs-fl-cdc-only (if the link has no caption the label must precede a section header)
Add a documentation for it, based on the commit that introduced the
flag.
Fixes: a69a168a1b ("[media] cec: add proper support for CDC-Only CEC devices")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The last open issues have been addressed, so it is time to move
this out of staging and into the mainline and to move the public
cec headers to include/uapi/linux.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CEC_MSG_INITIATE_ARC message is special since it is the ONLY
CEC message that accepts two possible valid replies:
CEC_MSG_REPORT_ARC_INITIATED and CEC_MSG_REPORT_ARC_TERMINATED.
So if the transmitted message is CEC_MSG_INITIATE_ARC and the remote
side replied with CEC_MSG_REPORT_ARC_INITIATED or CEC_MSG_REPORT_ARC_TERMINATED,
then a msg->reply value of CEC_MSG_REPORT_ARC_INITIATED or
CEC_MSG_REPORT_ARC_TERMINATED will match either reply.
I thought about either adding a second reply2 field, but that's ugly
for all other messages that have only one reply, and what if in the
future a new message is added that can have three replies?
Another option would be to add a cec_msg flag, but really, the combination
of CEC_MSG_REPORT_ARC_INITIATED and a reply value of one of the two
possible replies already functions as a flag.
Another advantage of this approach is that it is safe to re-use a
cec_msg struct. No need to zero a flags field or a reply2 field.
So since this really is an exception in the CEC specification, I
decided to implement it as an exception as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Give the caller more control over how replies to a transmit are
handled. By default the reply will only go to the filehandle that
called CEC_TRANSMIT. If this new flag is set, then the reply will
also go to all followers.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
By default the CEC_MSG_USER_CONTROL_PRESSED/RELEASED messages
are passed on to the follower(s) only. If the new
CEC_LOG_ADDRS_FL_ALLOW_RC_PASSTHRU flag is set in the
flags field of struct cec_log_addrs then these messages are also
passed on to the remote control input subsystem and they will appear
as keystrokes.
This used to be the default behavior, but now you have to explicitly
enable it. This is done to force the caller to think about possible
security issues (e.g. if these messages are used to enter passwords).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This uses Laurent's python script to convert all tables, dropping
the useless 'row' comments.
See commit c2b66cafdf ("[media] v4l: doc: Remove row numbers from tables")
for the script that was used.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The code examples on how to enumerate controls were really long in the
tooth. Update them.
Using FLAG_NEXT_CTRL is preferred these days, so give that example first.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Improve the internal CEC documentation. In particular add a section
that specifies that transmit-related interrupts should be processed
before receive interrupts.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Memory-to-memory V4L2 devices all have file handle specific context.
Say this in the API documentation so that the user space may rely on it
being the case.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The previous patch renamed several files that are cross-referenced
along the Kernel documentation. Adjust the links to point to
the right places.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using codeblock for the cardlists, use tables, in
order to improve their visual when presenting them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some entries are out of order.
While here, clear spaces/tabs.
The content remains the same, with the exeption of one duplicated
entry from the same driver, where two different brand names share
the same entry. The content of such cell was merged, using a
comma.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Describe the hsv_enc field and its use.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
My initials were on the Changelog, but there was no link to my name.
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Improve the MT21C documentation, making it clearer that this format
requires the MDP for further processing.
Also fix the fourcc (it was a fivecc :-) )
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJX8Zc4AAoJEHm+PkMAQRiGQG8H/2Hd4IwJh75snGY5LAiWt6ra
kGM/SobvLAMtcoxXCeHqf2bZrxa2Zz9tnEzhuLMGaf9a3l79xHa8YumK5KS1JPGV
6lZBvuPi8BIyT0cpYH000e5ehHfhP6pSGJKZ2EuLv43HcBeVZEGAf3/8jSAlNA15
bwFy2ZEkwJGThbnT6au0Y3s9h8LcNjtllu9hjfb+/9oNGvp8r4QhdVodIqIQ4cv6
SeUfv7Pn2LZDMCSaTP9bh2KaR4dwYZHFsVe75x2wND5Sfq7DVBBfFkAoV/RwJDTM
gBc3PNnmzb/tix6ohOrSQnSiGsXv1uASxvHH3RD2zG6g7Aj9Eq/+Z7ZdPu2+o+U=
=U+ef
-----END PGP SIGNATURE-----
Merge tag 'v4.8' into patchwork
Linux 4.8
* tag 'v4.8': (1761 commits)
Linux 4.8
ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
MIPS: CM: Fix mips_cm_max_vp_width for non-MT kernels on MT systems
include/linux/property.h: fix typo/compile error
ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()
mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
MAINTAINERS: Switch to kernel.org email address for Javi Merino
x86/entry/64: Fix context tracking state warning when load_gs_index fails
x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
x86/vdso: Fix building on big endian host
x86/boot: Fix another __read_cr4() case on 486
sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock
sctp: change to check peer prsctp_capable when using prsctp polices
sctp: remove prsctp_param from sctp_chunk
sctp: move sent_count to the memory hole in sctp_chunk
tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
x86/init: Fix cr4_init_shadow() on CR4-less machines
MIPS: Fix detection of unsupported highmem with cache aliases
MIPS: Malta: Fix IOCU disable switch read for MIPS64
MIPS: Fix BUILD_ROLLBACK_PROLOGUE for microMIPS
...
As warned by linuxdoc[1] tool, using:
$ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done
include/media/v4l2-dev.h:118 :WARN: function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs: if_vid_dec_index <--> if_vid_dec_pad_index
include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs: if_aud_dec_index <--> if_aud_dec_pad_index
include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs: v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready
drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs: cintlog2 <--> intlog2
include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs: s_radio <--> v4l2_subdev_tuner_ops
include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs: v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata
include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs: v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata
drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs: dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user
include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs: vb2_ops <--> vb2_buf_ops
include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source'
include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs: media_entity_enum_test <--> media_entity_enum_test_and_set
include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_pad
include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_link
include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_intf
include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> intf_to_devnode
include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs: rc_open <--> rc_close
include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init'
include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe'
[1] https://return42.github.io/linuxdoc/linux.html
The above are real issues at the documentation. On several cases,
caused by cut-and-paste.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix a few indentation issues to enable automated table reorganization
by a regex-based script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Changeset ab6343956f9c ("[media] V4L2: Add documentation for SDI timings
and related flags") added documentation for new V4L2 defines, but
it forgot to update videodev2.h.rst.exceptions to point to where
the documentation for those new values will be inside the book,
causing those warnings:
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-bt-std-sdi (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-fl-first-field-extra-line (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-in-st-no-v-lock (if the link has no caption the label must precede a section header)
Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-in-st-no-std-lock (if the link has no caption the label must precede a section header)
Fixes: ab6343956f9c ("[media] V4L2: Add documentation for SDI timings and related flags")
Cc: Charles-Antoine Couret <charles-antoine.couret@nexvision.fr>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The codes will be called:
MEDIA_BUS_FMT_SBGGR16_1X16
MEDIA_BUS_FMT_SGBRG16_1X16
MEDIA_BUS_FMT_SGRBG16_1X16
MEDIA_BUS_FMT_SRGGB16_1X16
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The V4L2_PIX_FMT_SBGGR16 format is documented to contain samples of fewer
than 16 bits. However, we do have specific definitions for smaller sample
sizes. Therefore, this note is redundant from the API point of view.
Currently only two drivers, am437x and davinci, use the
V4L2_PIX_FMT_SBGGR16 pixelformat currently. The sampling precision is
understood to be 16 bits in all current cases.
Remove the note on sampling precision.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The other raw bayer formats had a single sample depth dependent definition
whereas the 8-bit formats had one page for each. Unify the documentation
of the 8-bit formats.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- Explicitly state that the most significant n bits are zeroed on 10 and
12 bpp formats.
- Remove extra comma from the last entry of the format list
- Add a missing colon before a list
- Use figures versus word numerals consistently
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The number of high order bits in samples was documented to be 6 for 12-bit
data. This is clearly wrong, fix it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The 10-bit packed raw bayer format documented that the data of the first
pixel of a four-pixel group was found in the first byte and the two
highest bits of the fifth byte. This was not entirely correct. The two
bits in the fifth byte are the two lowest bits. The second pixel occupies
the second byte and third and fourth least significant bits and so on.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The v4l2_m2m_dev is opaque: its meaning is only known by
v4l2-mem2mem.c. Ignore it on nitpick mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
One reference there is still using :ref:. Fix it, to solve this
warning:
Documentation/media/uapi/mediactl/media-ioc-g-topology.rst:236: WARNING: undefined label: media-v2-intf-devnode (if the link has no caption the label must precede a section header)
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The struct v4l2_mpeg_vbi_ITV0 is identical to struct v4l2_mpeg_vbi_itv0,
except by its size, and it is documented at the same place at the
book.
Fix cross reference for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several broken references there, due to the conversion to
C domain. Fix them using this shell script and manually adjust what's
broken:
# funcs is a file with the broken functions/references
for i in $(cat funcs|sort|uniq|perl -ne 'print "$1\n" if (m/(\S+)$/)'); do
i=${i//-/_}
echo $i
j=${i//_/-}
for k in $(git grep -l "_$j:" Documentation/); do
sed s,\_$j\:,"c\:type\:\: $i", <$k >a && mv a $k
done
for k in $(git grep -l "$j" Documentation/media/*.exceptions); do
sed s,$j,":c\:type\:\`$i\`", <$k >a && mv a $k
done
for k in $(git grep -l "$j" Documentation/); do
sed "s,:ref:\`$i <$j>\`,:c:type:\`$i\`," <$k >a && mv a $k
sed "s,:ref:\`$j\`,:c:type:\`$i\`," <$k >a && mv a $k
sed -E "s,:ref:\`(.*)<$j>\`,:c:type:\`\1<$i>\`," <$k >a && mv a $k
done
for k in $(git grep -l "<$j>" include/media); do
sed -E "s,:ref:\`(.*)<$j>\`,enum \&$i," <$k >a && mv a $k
done
done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several structs were renamed or removed during V4L2 development.
Don't try to cross-reference the legacy ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use C cross-references to mention the V4L2 API calls on all
places it occurs inside this file.
While here, also mark constants as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix those warnings:
Documentation/media/uapi/cec/cec-ioc-dqevent.rst:124: WARNING: c:func reference target not found: clock_gettime(2)
By replacing it with the right function name, using this shell script:
for i in `find Documentation/media -type f`; do sed 's,clock_gettime(2),clock_gettime,' <$i >a && mv a $i; done
Please notice that this will make the nitpick mode to shut up
complaining about that, becasue clock_gettime is on its exclude list,
but the cross reference will be undefined until someone documents
this function at the core documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The :c:type: references point to the structure name, and not to
struct foo.
Fixed via this shell script:
for i in `find Documentation/media -type f`; do perl -ne 'if (s/\:c\:type\:\`struct\s*(\S+)\`/struct :c:type:`$1`/) { s/struct\s+struct/struct/; s/(struct\s+\:c\:type\:\`\S+\`)\s+structure/$1/; } print $_' <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using c:type:`struct foo <foo>`, use:
struct c:type:`foo`
This patch was generated via this shell script:
for i in `find Documentation/media -type f`; do perl -ne 'if (m/\:c\:type\:\`struct\s+(\S+)\s*\<(\S+)\>\`/) { $s=$1; $r=$2; if ($s eq $r) { s/\:c\:type\:\`struct\s+(\S+)\s*\<(\S+)\>\`/struct :c:type:`$2`/; s/struct\s+struct/struct/; s/(struct\s+\:c\:type\:\`\S+\`)\s+structure/$1/; }} print $_' <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Trivially fix those broken references, by copying the structs
fron the header, just like other API documentation at the
DVB side.
This doesn't have the level of quality used at the V4L2 side
of the API, but, as this documents a deprecated API, used
only by av7110 driver, it doesn't make much sense to invest
time making it better.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several links are broken, as they were using the typedef
name, instead of using the corresponding structs. Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for struct ca_slot_info and for the two
sets of define used by it, according with what's there at the
ca.h header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are no descriptions at ca.h header for this struct.
Yet, as we want to get rid of the warnings, let's add a
boilerplate, with just the struct types and fields.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that we moved away from the :ref: type of references,
we need to update the exceptions lists.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two warnings that are due to functions that has long
gone:
Documentation/media/kapi/v4l2-subdev.rst:417: WARNING: c:func reference target not found: v4l2_i2c_new_subdev_cfg
Documentation/media/kapi/v4l2-subdev.rst:436: WARNING: c:func reference target not found: v4l2_i2c_new_probed_subdev
Update the documentation to remove those.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The "struct" were inside the reference, causing it to break.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several undocumented functions here; document them.
While here, make checkpatch.pl happy.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Change the parse-headers.pl and the corresponding files to use
the C domain for enum references.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The V4L version 1 structures had long gone from the Linux Kernel.
It doesn't make sense to use cross-references for them, as they
won't be found.
So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
instead of declaring the uAPI structs using usual refs, e. g.:
.. _foo-struct:
Use the C domain way:
.. c:type:: foo_struct
This way, the kAPI documentation can use cross-references to
point to the uAPI symbols.
That solves about ~100 undefined warnings like:
WARNING: c:type reference target not found: foo_struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some functions/macros used by the mediactl documentation
that are alien to the media subsystem. Ignore them.
After this patch, the media core will only complain about this
static function:
Documentation/media/kapi/mc-core.rst:97: WARNING: c:func reference target not found: media_devnode_release
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cross-reference to "struct media_pad" was pointing to
a place that doesn't exist. Fix it, and adjust the second
reference on the same paragraph to use the same text.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of keeping those notes at the file on a non-structured
way, move them to dtv-core.rst, using the proper ReST tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There a some other types and functions that aren't declared
inside the media document but are elsewhere. Add them to the
ignore list.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* 'docs-next' of git://git.lwn.net/linux:
doc-rst: define PDF's of the media folder
doc-rst: generic way to build PDF of sub-folders
docs: sphinx-extensions: add metadata parallel-safe
docs-rst: kernel-doc: fix typedef output in RST format
docs-rst: improve typedef parser
docs: kernel-parameter: Improve the description of nr_cpus and maxcpus
docs-rst: kernel-doc: better output struct members
To build only the PDF of the media folder run::
make SPHINXDIRS=media pdfdocs
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix copy-and-paste error: the radio devices are /dev/radio, not /dev/vbi.
Signed-off-by: Hans Verkuil <<hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add support for the Hauppauge WinTV quadHD ATSC version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.
Signed-off-by: Stephen Backway <stev391@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This field was never documented, and neither was it mentioned that
it should be zeroed by the application.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
V4L2_CTRL_FLAG_VOLATILE behaviour when V4L2_CTRL_FLAG_EXECUTE_ON_WRITE
is set was not properly explained.
Also set some hyperlink to ease the Documentation browsing.
Credit-to: Hans Verkuil <hansverk@cisco.com>
[mchehab@s-opensource.com: fix a trivial merge conflict]
Reported-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document that the cropping ioctls can return ENODATA if the operation
isn't supported for the current input or output.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of referring to Y', Cb and Cr, it referred to Yc', Cbc and
Crc, which were accidentally copied from the BT.2020 constant luminance
text.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The text of the note included text that shouldn't have been part
of the note. Move that out of the note into the proper place.
[mchehab@s-opensource.com: fix a trivial merge conflict]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The V4L2_YCBCR_ENC_SYCC encoding is identical to V4L2_YCBCR_ENC_601.
Remove V4L2_YCBCR_ENC_SYCC from the documentation since it should not
be used.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The SYCC Y'CbCr encoding is identical to the 601 encoding. Since the
SYCC define is about to be removed for use in the kernel we need to
drop it in the TPG code as well.
This patch also adds a 4th decimal to the 601 conversion matrix.
That was specified by the sYCC spec and it makes sense to use this
across the board.
[mchehab@s-opensource.com: fix conflicts with LaTeX math expression patch]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The default quantization range of the Y'CbCr encodings of sRGB
and AdobeRGB are full range instead of limited range according to
the corresponding standards.
Fix this in the V4L2_MAP_QUANTIZATION_DEFAULT macro.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some touch controllers send out touch data in a similar way to a
greyscale frame grabber.
Add new device type VFL_TYPE_TOUCH:
- This uses a new device prefix v4l-touch for these devices, to stop
generic capture software from treating them as webcams. Otherwise,
touch is treated similarly to video capture.
- Add V4L2_INPUT_TYPE_TOUCH
- Add MEDIA_INTF_T_V4L_TOUCH
- Add V4L2_CAP_TOUCH to indicate device is a touch device
Add formats:
- V4L2_TCH_FMT_DELTA_TD16 for signed 16-bit touch deltas
- V4L2_TCH_FMT_DELTA_TD08 for signed 16-bit touch deltas
- V4L2_TCH_FMT_TU16 for unsigned 16-bit touch data
- V4L2_TCH_FMT_TU08 for unsigned 8-bit touch data
This support will be used by:
- Atmel maXTouch (atmel_mxt_ts)
- Synaptics RMI4.
- sur40
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Sphinx 1.4.x definition for \DUrole is:
\providecommand*{\DUrole}[2]{%
\ifcsname DUrole#1\endcsname%
\csname DUrole#1\endcsname{#2}%
\else% backwards compatibility: try \docutilsrole#1{#2}
\ifcsname docutilsrole#1\endcsname%
\csname docutilsrole#1\endcsname{#2}%
\else%
#2%
\fi%
\fi%
}
This is broken when it is used inside a \begin{alltt} block.
So, replace it by just "#2", as this won't cause troubles, and
it is one of the fallback methods for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.
While here, improve the documentation to make them to look more
like the rest of the document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.
While here, improve the documentation to make them to look more
like the rest of the document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.
While here, improve the documentation to make them to look more
like the rest of the document.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.
While here, improve the documentation, marking the deprecated
ioctls, and making the non-deprecated ones more like the rest
of the media book.
Also, add a notice for ioctls that still require documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Name all ioctl references and make them match the ioctls that
are documented. That will improve the cross-reference index,
as it will have all ioctls and syscalls there.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that we have an override for the c domain that will do
the right thing for the Kernel, stop abusing on the cpp
domain.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Enrich math formulas by using the Sphinx math. That will allow
using those formulas on pdf documents as well.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* docs-next/docs-next: (51 commits)
docs-rst: add package adjustbox
docs-rst: Fix an warning when in interactive mode
docs-rst: Use better colors for note/warning/attention boxes
docs-rst: conf.py: adjust the size of .. note:: tag
docs-rst: add support for LaTeX output
doc-rst: migrate ioctl CEC_DQEVENT to c-domain
doc-rst: Revert "kernel-doc: fix handling of address_space tags"
doc-rst: moved *duplicate* warnings to nitpicky mode
doc-rst:c-domain: ref-name of a function declaration
doc-rst: add boilerplate to customize c-domain
docs: Sphinxify gdb-kernel-debugging.txt and move to dev-tools
docs: sphinxify kmemcheck.txt and move to dev-tools
docs: sphinxify kmemleak.txt and move it to dev-tools
docs: sphinxify ubsan.txt and move it to dev-tools
docs: sphinxify kasan.txt and move to dev-tools
docs: sphinixfy gcov.txt and move to dev-tools
docs: sphinxify kcov.txt and move to dev-tools
docs: sphinxify sparse.txt and move to dev-tools
docs: sphinxify coccinelle.txt and add it to dev-tools
docs: create a new dev-tools directory
...
This is only one example, demonstrating the benefits of the patch
series. The CEC_DQEVENT ioctl is migrated to the sphinx c-domain and
referred by ":name: CEC_DQEVENT".
With this change the indirection using ":ref:`CEC_DQEVENT` is no longer
needed, we can refer the ioctl directly with ":c:func:`CEC_DQEVENT`". As
addition in the index, there is a entry "CEC_DQEVENT (C function)".
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Currently if none of the requested logical addresses can be claimed, the
framework will fall back to the Unregistered logical address.
Add a flag to enable this explicitly. By default it will just go back to
the unconfigured state.
Usually Unregistered is not something you want since the functionality is
very limited. Unless the application has support for this, it will fail
to work correctly. So require that the application explicitly requests
this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The documentation for the cec_event_state_change struct was incomplete.
This patch documents what happens in the corner cases.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are several minor issues that are seen when building
PDF on interactive mode.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two big tables here that are very hard to adjust its
size.
The first one would fit into one page, but the latex.py logic
at Sphinx auto-switches to longtable when there are more than 30
rows. There's no way to override without coding.
The second one is really big, and won't fit on a single page.
So, it has to use tiny font to fit.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is painful to put code/verbatim code in bold. It seems that
the only way is to arrange it like:
``foo``
bar
At least on LaTeX output, when this happens, the "foo" string
is not hidentable/breakable. The entire string should fit into
a single line.
Add a workaround for this ReST limitation by splitting the
foo string into two strings, on separate lines. The output
is not the best, but it works.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx is really pedantic with respect to the order where
table tags and references are created. Putting things at
the wrong order causes troubles.
The order that seems to work is:
.. raw:: latex
.. tabularcolumns::
.. _foo_name:
.. cssclass: longtable
.. flat-table::
Reorder the tags to the above order, to avoid troubles, and
fix remaining warnings introduced by media recent patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A few tables at the media uAPI documentation have columns
not well dimentioned. Adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add position hints for some tables, in order for them to be
shown properly on LaTeX output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Several tables are missing column definitions and/or are too big
to fit into the page. Adjust them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tuner type table misses descriptions for each type. While
most of stuff are obvious, the two SDR definitions aren't.
So, add descriptions to all of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adjust simple cases where the columns on some vidioc files
are overriding their neighbours.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The tables don't fit at the page on this file. As noticed
before, Sphinx (or LaTeX?) does a crap job on tables with
cell span, and some work has to be done to make it fit.
Move the see also reference to a footnote, break one paragraph
into two and adjust the table columns to make it visible.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This table is too big for LaTeX output, and lacks columns
specs for LaTeX format.
Also, it has a hidden column, as there are some cell spans
with the wrong values.
Fix it, so it can be displayed properly on LaTeX/PDF.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This table has several troubles:
- a duplicated "struct" on its name;
- a reference to a V4L version 1 struct that will never
point to something (as we got rid of V4L1 API a long
time ago);
- misses hints for LaTeX output (column size and longtable
style).
Fix them.
It should be noticed that the first column of this table is
not aligned with the rest. I suspect that this is a bug at
the flat-table extension.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix mosto fo the tables there in order to make them fit at the
page size.
There are, however, two exceptions: RGB and YUV big tables,
where adding the raw latex adjustbox caused the tables to not
be properly formatted. I suspect that the problem is because
those are long tables, but not really sure.
The thing is that Sphinx lacks an "adjustbox" tag that would
avoid the raw latex hacks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Just like on dvb-raw-vbi.rst, the LaTeX output doesn't work
well with cell spans. Also, this is actually a note, so, move
it to a footnote.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Originally, each image were one page big, causing them to be
displayed on separate pages at the PDF output. Re-generate
them from the gif files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There's a bug with LaTeX output on flat-tables with Sphinx 1.4.5
that prevents references at a cell span to be broken. As the
text is indeed too long, it makes sense to place the reference
to the pictures showing the VBI limits as a footnote.
That makes the text easier to read and also solves the issue
with LaTeX output.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The table columns are not properly displayed. Also, some
tables are too big to fit into just one page. So, fix them,
in order to better display the tables.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Those hints are wrong, and doesn't really improve the look
of those tables. So, keep them only when they're useful.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adjust the table to fit at the LaTeX and PDF outputs, just like
what was done with pixfmt-packed-rgb.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Adjust the tables to fit at the LaTeX and PDF outputs.
I wrote a previous patch RFC to show the big table in landscape,
but it makes harder to read on displays.
So, instead, let's use the adjustbox to shrink the size of those
long tables, as the table size can still be visible on screen,
and it is a way better to read in horizontal position and
visible if printed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There is an extra column just before eack pack of bits, to
improve table reading, but the header file didn't take this
into account.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add column hints for LaTeX to format columns on the tables inside
pixfmt-002.rst and pixfmt-006.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Lots of tables at extended-controls.rst need explicit hints for
LaTeX to adjust their widths. Provide that.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
LaTeX doesn't handle too well auto-width on tables, and ReST
markup requires an special tag to give it the needed hints.
As we're using A4 paper, we have 17cm of useful spaces. As
most media tables have widths, let's use it to generate the
needed via the following perl script:
my ($line_size, $table_header, $has_cols) = (17.5, 0, 0);
my $out;
my $header = "";
my @widths = ();
sub round { $_[0] > 0 ? int($_[0] + .5) : -int(-$_[0] + .5) }
while (<>) {
if (!$table_header) {
$has_cols = 1 if (m/..\s+tabularcolumns::/);
if (m/..\s+flat-table::/) {
$table_header = 1;
$header = $_;
next;
}
$out .= $_;
next;
}
$header .= $_;
@widths = split(/ /, $1) if (m/:widths:\s+(.*)/);
if (m/^\n$/) {
if (!$has_cols && @widths) {
my ($tot, $t, $i) = (0, 0, 0);
foreach my $v(@widths) { $tot += $v; };
$out .= ".. tabularcolumns:: |";
for ($i = 0; $i < scalar @widths - 1; $i++) {
my $v = $widths[$i];
my $w = round(10 * ($v * $line_size) / $tot) / 10;
$out .= sprintf "p{%.1fcm}|", $w;
$t += $w;
}
my $w = $line_size - $t;
$out .= sprintf "p{%.1fcm}|\n\n", $w;
}
$out .= $header;
$table_header = 0;
$has_cols = 0;
$header = "";
@widths = ();
}
}
print $out;
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Hans Verkuil