This patch makes the msm ehci driver available to use on QCOM SOCs,
which have the same IP.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some buggy JMicron USB-ATA bridges don't know how to translate the FUA
bit in READs or WRITEs. This patch adds an entry in unusual_devs.h
and a blacklist flag to tell the sd driver not to use FUA.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Michael Büsch <m@bues.ch>
Tested-by: Michael Büsch <m@bues.ch>
Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A few more fixes for this RC cycle. There's a revert of a previous patch
which ended up being the wrong version, so we reverted that commit and
applied a better fix.
CPPI41 got a race condition fix which was found by Thomas Gleixner.
The MSM PHY driver got a runtime pm usage fix so that it wouldn't
kill the PHY while it was still being used.
We also have a fix for a panic caused when removing musb_am335x driver.
Other than that, a few other minor fixes.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7Mt5
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v3.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.16-rc4
A few more fixes for this RC cycle. There's a revert of a previous patch
which ended up being the wrong version, so we reverted that commit and
applied a better fix.
CPPI41 got a race condition fix which was found by Thomas Gleixner.
The MSM PHY driver got a runtime pm usage fix so that it wouldn't
kill the PHY while it was still being used.
We also have a fix for a panic caused when removing musb_am335x driver.
Other than that, a few other minor fixes.
Signed-of-by: Felipe Balbi <balbi@ti.com>
commit 943c13971c "usb: musb: dsps: implement ->set_mode()"
should have made it possible to use the driver with boards that have
the USBID pin unconnected. This doesn't actually work, since the
driver uses the wrong base address to access the mode register.
Furthermore it uses different base addresses in different places to
access the same register (phy_utmi).
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
It appears that no one ever run ffs-test on a big-endian machine,
since it used cpu-endianess for fs_count and hs_count fields which
should be in little-endian format. Fix by wrapping the numbers in
cpu_to_le32.
Cc: stable@vger.kernel.org
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Use case is when the phy is configured in host mode and a usb device is
attached to board before bootup. On bootup, with the existing code and
runtime pm enabled, the driver would decrement the pm usage count
without checking the current state of the phy. This pm usage count
decrement would trigger the runtime pm which than would abort the
usb enumeration which was in progress. In my case a usb stick gets
detected and then immediatly the driver goes to low power mode which is
not correct.
log:
[ 1.631412] msm_hsusb_host 12520000.usb: EHCI Host Controller
[ 1.636556] msm_hsusb_host 12520000.usb: new USB bus registered, assigned bus number 1
[ 1.642563] msm_hsusb_host 12520000.usb: irq 220, io mem 0x12520000
[ 1.658197] msm_hsusb_host 12520000.usb: USB 2.0 started, EHCI 1.00
[ 1.659473] hub 1-0:1.0: USB hub found
[ 1.663415] hub 1-0:1.0: 1 port detected
...
[ 1.973352] usb 1-1: new high-speed USB device number 2 using msm_hsusb_host
[ 2.107707] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.108993] scsi0 : usb-storage 1-1:1.0
[ 2.678341] msm_otg 12520000.phy: USB in low power mode
[ 3.168977] usb 1-1: USB disconnect, device number 2
This issue was detected on IFC6410 board.
This patch fixes the intial runtime pm trigger by checking the phy
state and decrementing the pm use count only when the phy state is IDLE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
On Marvell Armada XP, when a CPU comes back from deep idle state of
cpuidle, it restarts its execution at armada_370_xp_cpu_resume(),
which puts back the CPU into the coherency, and then calls the generic
cpu_resume() function.
While this works on little-endian configurations, it doesn't work on
big-endian configurations because the CPU restarts in little-endian,
and therefore must be switched back to big-endian to operate
properly. To achieve this, a 'setend be' instruction must be executed
in big-endian configurations. However, the ARM_BE8() macro that is
used to implement nice compile-time conditional for ARM LE vs. ARM BE8
is not easily usable in inline assembly.
Therefore, this patch moves the armada_370_xp_cpu_resume() C function,
which was anyway just a block of inline assembly, into a proper
pmsu_ll.S file, and adds the appropriate ARM_BE8(setend be)
instruction.
Without this patch, an Armada XP big endian configuration with cpuidle
enabled fails to boot, as it hangs as soon as one of the CPU hits the
deep idle state.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1404130165-3593-1-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Commit 497a92308a ("ARM: mvebu:
implement L2/PCIe deadlock workaround") introduced some logic in
coherency.c to adjust the PL310 cache controller Device Tree node of
Armada 375 and Armada 38x platform to include the 'arm,io-coherent'
property if the system is running with hardware I/O coherency enabled.
However, with the L2CC driver cleanup done by Russell King, the
initialization of the L2CC driver has been moved earlier, and is now
part of the init_IRQ() ARM function in
arch/arm/kernel/irq.c. Therefore, calling coherency_init() in
->init_time() is now too late, as the Device Tree property gets added
too late (after the L2CC driver has been initialized).
In order to fix this, this commit removes the ->init_time() callback
use in board-v7.c and replaces it with an ->init_irq() callback. We
therefore no longer use the default ->init_irq() callback, but we now
use the default ->init_time() callback.
In this newly introduced ->init_irq() callback, we call irqchip_init()
which is the default behavior when ->init_irq() isn't defined, and
then do the initialization related to the coherency: SCU, coherency
fabric, and mvebu-mbus (which is needed to start secondary CPUs).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1402585772-10405-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
In preparation to a small re-organization of the initialization
sequence in board-v7.c, this commit moves the registration of the
custom external abort handler on Armada 375 later in the boot
sequence, and makes it more similar to the other quirks that we
already have. There is indeed no need to register this abort handler
particularly early, it simply needs to be registered before switching
to userspace.
In addition to this, this commit makes the registration of the custom
abort handler conditional on Armada 375 Z1, because Armada 375 A0 and
later iterations are not affected by the issue.
This commit was tested on both Armada 375 Z1 and Armada 375 A0
platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1402585772-10405-3-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The usage of uprobe_buffer_enable() added by dcad1a20 is very wrong,
1. uprobe_buffer_enable() and uprobe_buffer_disable() are not balanced,
_enable() should be called only if !enabled.
2. If uprobe_buffer_enable() fails probe_event_enable() should clear
tp.flags and free event_file_link.
3. If uprobe_register() fails it should do uprobe_buffer_disable().
Link: http://lkml.kernel.org/p/20140627170146.GA18332@redhat.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Fixes: dcad1a204f "tracing/uprobes: Fetch args before reserving a ring buffer"
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I do not know why dd9fa555d7 "tracing/uprobes: Move argument fetching
to uprobe_dispatcher()" added the UPROBE_HANDLER_REMOVE, but it looks
wrong.
OK, perhaps it makes sense to avoid store_trace_args() if the tracee is
nacked by uprobe_perf_filter(). But then we should kill the same code
in uprobe_perf_func() and unify the TRACE/PROFILE filtering (we need to
do this anyway to mix perf/ftrace). Until then this code actually adds
the pessimization because uprobe_perf_filter() will be called twice and
return T in likely case.
Link: http://lkml.kernel.org/p/20140627170143.GA18329@redhat.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add WARN_ON's into uprobe_unregister() and uprobe_apply() to ensure
that nobody tries to play with the dead uprobe/consumer. This helps
to catch the bugs like the one fixed by the previous patch.
In the longer term we should fix this poorly designed interface.
uprobe_register() should return "struct uprobe *" which should be
passed to apply/unregister. Plus other semantic changes, see the
changelog in commit 41ccba029e.
Link: http://lkml.kernel.org/p/20140627170140.GA18322@redhat.com
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This reverts commit 43fe98913c.
This patch is very wrong. Firstly, this change leads to unbalanced
uprobe_unregister(). Just for example,
# perf probe -x /lib/libc.so.6 syscall
# echo 1 >> /sys/kernel/debug/tracing/events/probe_libc/enable
# perf record -e probe_libc:syscall whatever
after that uprobe is dead (unregistered) but the user of ftrace/perf
can't know this, and it looks as if nobody hits this probe.
This would be easy to fix, but there are other reasons why it is not
simple to mix ftrace and perf. If nothing else, they can't share the
same ->consumer.filter. This is fixable too, but probably we need to
fix the poorly designed uprobe_register() interface first. At least
"register" and "apply" should be clearly separated.
Link: http://lkml.kernel.org/p/20140627170136.GA18319@redhat.com
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>
Cc: stable@vger.kernel.org # v3.14
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
We import the CPL via SS.DPL since ae9fedc793. However, we fail to
export it this way so far. This caused spurious guest crashes, e.g. of
Linux when accessing the vmport from guest user space which triggered
register saving/restoring to/from host user space.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently we can't trust this field on other platforms and need to find
some other way.
This fixes a regression introduced in
commit 27da3bdfcf
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri Apr 4 16:12:07 2014 -0700
drm/i915: use VBT to determine whether to enumerate the VGA port
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Fix a number of miscellaneous bugs for punch hole as well as a
long-standing potential double buffer head release when failing a
block allocation for an indirect-mapped file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=X4vY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Fix a regression when trying to compile ext4 on older versions gcc.
Fix a number of miscellaneous bugs for punch hole as well as a
long-standing potential double buffer head release when failing a
block allocation for an indirect-mapped file"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix hole punching for files with indirect blocks
ext4: Fix block zeroing when punching holes in indirect block files
ext4: decrement free clusters/inodes counters when block group declared bad
fs/mbcache: replace __builtin_log2() with ilog2()
ext4: Fix buffer double free in ext4_alloc_branch()
Pull ARM fixes from Russell King:
"Another round of ARM fixes. The largest change here is the L2 changes
to work around problems for the Armada 37x/380 devices, where most of
the size comes down to comments rather than code.
The other significant fix here is for the ptrace code, to ensure that
rewritten syscalls work as intended. This was pointed out by Kees
Cook, but Will Deacon reworked the patch to be more elegant.
The remainder are fairly trivial changes"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8087/1: ptrace: reload syscall number after secure_computing() check
ARM: 8086/1: Set memblock limit for nommu
ARM: 8085/1: sa1100: collie: add top boot mtd partition
ARM: 8084/1: sa1100: collie: revert back to cfi_probe
ARM: 8080/1: mcpm.h: remove unused variable declaration
ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache
Note that I don't maintain Documentation/ABI/,
Documentation/devicetree/, or the language translation files.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These days most people use git to send patches so I have added a section
about that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* A fix for a bug in setting threshold levels within the ad799x driver
which prevents correct setting of the thresholds.
* In ad7291 fix an case where a ERR_PTR value was returned directly
instead of having PTR_ERR applied. Hence it would report success
instead of failure.
* of_iio_channel_get_by_name returned a non null pointer if it fails
and the callee was expecting NULL to indicate failure. Fixed by
returning NULL in the error cases.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJTsCLrAAoJEFSFNJnE9BaI0VYQAKLnNrpueb63Yuh+GHg0Qpps
8sOUzPYf3x4NYHoQ4iI/ZTMVRneY1tO9AdweTnHlDJrtUnzBvpi53ctxu5dG0e+P
FvarQ7cMni0lWumC9VeBMaBZclT6ReyWEpQQKfPI+EeCaatlBtgzfe76SpRqSaMc
9lSwFTVCU0S3wSWIfa24rLTt0YPmNfLe31htjoY7nqdi2FRGTeARySCaIR9KAMmt
uZDcFNcZ0b5FvO8EZIXzp0Y9GqkLqjYeBMeuduOAIB/ukgTKV4z41vZG/zAy034O
EE0XTp1wyR1sHAk2xnYzAd8kpCsqGHYxJc287MsgQAfS1nuayzRByraxA+7XhLIy
kWHT8qXT3OvQ39iq/xQH2xL3V3NGXF/h+apRlEdNOnXDP8xVTI4ue4IdoiLNG4z0
UdybXjJshsWUOWZS6sVITPmj2RCnTqoPsO+fJRHA0Ws9sGDFpM+B1D3SONudfU/a
I3B7C3rJfGdONS99sDqq0i+cyTe5LzSl1Yb9es+iUfrtQ7NVmX1jbtT33wgTzgqZ
mbf0PBr+QWCS6KeWVl7zUJDv1iN7m0jX8gfjWHdWRWDJMriM2d23O4YLXjR7nMYM
uOr80Tg1yHPs9uAv3Qfa0iG2ippZ68M0dEKbButDbwg2ex1tmghnR3qjGag+Yeme
dxnW1PLYQpGQaEilYByZ
=a4UI
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-3.16b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
Second set of IIO fixes for the 3.16 cycle.
* A fix for a bug in setting threshold levels within the ad799x driver
which prevents correct setting of the thresholds.
* In ad7291 fix an case where a ERR_PTR value was returned directly
instead of having PTR_ERR applied. Hence it would report success
instead of failure.
* of_iio_channel_get_by_name returned a non null pointer if it fails
and the callee was expecting NULL to indicate failure. Fixed by
returning NULL in the error cases.
On the syscall tracing path, we call out to secure_computing() to allow
seccomp to check the syscall number being attempted. As part of this, a
SIGTRAP may be sent to the tracer and the syscall could be re-written by
a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall
is ignored by the current code unless TIF_SYSCALL_TRACE is also set on
the current thread.
This patch slightly reworks the enter path of the syscall tracing code
so that we always reload the syscall number from
current_thread_info()->syscall after the potential ptrace traps.
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits
to use memblock_get_current_limit for calculating the max_low pfn.
nommu targets never actually set a limit on memblock though which
means memblock_get_current_limit will just return the default
value. Set the memblock_limit to be the end of DDR to make sure
bounds are calculated correctly.
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The CFI mapping is now perfect so we can expose the top block, read only.
There isn't much to read, though, just the sharpsl_params values.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reverts commit d26b17edaf
ARM: sa1100: collie.c: fall back to jedec_probe flash detection
Unfortunately the detection was challenged on the defective unit used for tests:
one of the NOR chips did not respond to the CFI query.
Moreover that bad device needed extra delays on erase-suspend/resume cycles.
Tested personally on 3 different units and with feedback of two other users.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The sync_phys variable has been replaced by link time computation in
mcpm_head.S before the code was submitted upstream.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When a PL310 cache is used on a system that provides hardware
coherency, the outer cache sync operation is useless, and can be
skipped. Moreover, on some systems, it is harmful as it causes
deadlocks between the Marvell coherency mechanism, the Marvell PCIe
controller and the Cortex-A9.
To avoid this, this commit introduces a new Device Tree property
'arm,io-coherent' for the L2 cache controller node, valid only for the
PL310 cache. It identifies the usage of the PL310 cache in an I/O
coherent configuration. Internally, it makes the driver disable the
outer cache sync operation.
Note that technically speaking, a fully coherent system wouldn't
require any of the other .outer_cache operations. However, in
practice, when booting secondary CPUs, these are not yet coherent, and
therefore a set of cache maintenance operations are necessary at this
point. This explains why we keep the other .outer_cache operations and
only ->sync is disabled.
While in theory any write to a PL310 register could cause the
deadlock, in practice, disabling ->sync is sufficient to workaround
the deadlock, since the other cache maintenance operations are only
used in very specific situations.
Contrary to previous versions of this patch, this new version does not
simply NULL-ify the ->sync member, because the l2c_init_data
structures are now 'const' and therefore cannot be modified, which is
a good thing. Therefore, this patch introduces a separate
l2c_init_data instance, called of_l2c310_coherent_data.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is a regression from my patch a26e8c9f75, we
need to only unlock the block if we were the one who locked it. Otherwise this
will trip BUG_ON()'s in locking.c Thanks,
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
When starting a transaction just assert that current->journal_info
doesn't contain a send transaction stub, since send isn't supposed
to start transactions and when it finishes (either successfully or
not) it's supposed to set current->journal_info to NULL.
This is motivated by the change titled:
Btrfs: fix crash when starting transaction
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Chris Mason <clm@fb.com>
Add compression `workspace' in free_workspace() to
`idle_workspace' list head, instead of tail. So we have
better chances to reuse most recently used `workspace'.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Creating sprout will change the fsid of the mounted root.
do the same on the sysfs as well.
reproducer:
mount /dev/sdb /btrfs (seed disk)
btrfs dev add /dev/sdc /btrfs
mount -o rw,remount /btrfs
btrfs dev del /dev/sdb /btrfs
mount /dev/sdb /btrfs
Error:
kobject_add_internal failed for fe350492-dc28-4051-a601-e017b17e6145 with -EEXIST, don't try to register things with the same name in the same directory.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
when we replace the device its corresponding sysfs
entry has to be replaced as well
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
we would need the device links to be created,
when device is added.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
when we delete the device from the mounted btrfs,
we would need its corresponding sysfs enty to
be removed as well.
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
A few driver specific fixes, the biggest one being a fix for the newly
added Qualcomm SPI controller driver to make it not use its internal
chip select due to hardware bugs, replacing it with GPIOs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Jdak
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes, the biggest one being a fix for the newly
added Qualcomm SPI controller driver to make it not use its internal
chip select due to hardware bugs, replacing it with GPIOs"
* tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: qup: Remove chip select function
spi: qup: Fix order of spi_register_master
spi: sh-sci: fix use-after-free in sh_sci_spi_remove()
spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI
Several driver specific fixes here, the palmas fixes being especially
important for a range of boards - the recent updates to support new
devices have introduced several regressions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K0Hp
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Several driver specific fixes here, the palmas fixes being especially
important for a range of boards - the recent updates to support new
devices have introduced several regressions"
* tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65218: Correct the the config register for LDO1
regulator: tps65218: Add the missing of_node assignment in probe
regulator: palmas: fix typo in enable_reg calculation
regulator: bcm590xx: fix vbus name
regulator: palmas: Fix SMPS enable/disable/is_enabled
Pull SCSI target fixes from Nicholas Bellinger:
"Mostly minor fixes this time around. The highlights include:
- iscsi-target CHAP authentication fixes to enforce explicit key
values (Tejas Vaykole + rahul.rane)
- fix a long-standing OOPs in target-core when a alua configfs
attribute is accessed after port symlink has been removed.
(Sebastian Herbszt)
- fix a v3.10.y iscsi-target regression causing the login reject
status class/detail to be ignored (Christoph Vu-Brugier)
- fix a v3.10.y iscsi-target regression to avoid rejecting an
existing ITT during Data-Out when data-direction is wrong (Santosh
Kulkarni + Arshad Hussain)
- fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas
Patocka)
- fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iscsi-target: fix iscsit_del_np deadlock on unload
iovec: move memcpy_from/toiovecend to lib/iovec.c
iscsi-target: Avoid rejecting incorrect ITT for Data-Out
tcm_loop: Fix memory leak in tcm_loop_submission_work error path
iscsi-target: Explicily clear login response PDU in exception path
target: Fix left-over se_lun->lun_sep pointer OOPs
iscsi-target; Enforce 1024 byte maximum for CHAP_C key value
iscsi-target: Convert chap_server_compute_md5 to use kstrtoul
On uniprocessor preemptible kernel, target core deadlocks on unload. The
following events happen:
* iscsit_del_np is called
* it calls send_sig(SIGINT, np->np_thread, 1);
* the scheduler switches to the np_thread
* the np_thread is woken up, it sees that kthread_should_stop() returns
false, so it doesn't terminate
* the np_thread clears signals with flush_signals(current); and goes back
to sleep in iscsit_accept_np
* the scheduler switches back to iscsit_del_np
* iscsit_del_np calls kthread_stop(np->np_thread);
* the np_thread is waiting in iscsit_accept_np and it doesn't respond to
kthread_stop
The deadlock could be resolved if the administrator sends SIGINT signal to
the np_thread with killall -INT iscsi_np
The reproducible deadlock was introduced in commit
db6077fd0b, but the thread-stopping code was
racy even before.
This patch fixes the problem. Using kthread_should_stop to stop the
np_thread is unreliable, so we test np_thread_state instead. If
np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* Fix VT-d regression with handling multiple RMRR entries per
device
* Fix a small race that was left in the mmu_notifier handling in
the AMD IOMMUv2 driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ZWyp
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- fix VT-d regression with handling multiple RMRR entries per device
- fix a small race that was left in the mmu_notifier handling in the
AMD IOMMUv2 driver
* tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix small race between invalidate_range_end/start
iommu/vt-d: fix bug in handling multiple RMRRs for the same PCI device
Pull x86 fixes from Peter Anvin:
"A pile of fixes related to the VDSO, EFI and 32-bit badsys handling.
It turns out that removing the section headers from the VDSO breaks
gdb, so this puts back most of them. A very simple typo broke
rt_sigreturn on some versions of glibc, with obviously disastrous
results. The rest is pretty much fixes for the corresponding fallout.
The EFI fixes fixes an arithmetic overflow on 32-bit systems and
quiets some build warnings.
Finally, when invoking an invalid system call number on x86-32, we
bypass a bunch of handling, which can make the audit code oops"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi-pstore: Fix an overflow on 32-bit builds
x86/vdso: Error out in vdso2c if DT_RELA is present
x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile
x86_32, signal: Fix vdso rt_sigreturn
x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)
x86/vdso: Create .build-id links for unstripped vdso files
x86/vdso: Remove some redundant in-memory section headers
x86/vdso: Improve the fake section headers
x86/vdso2c: Use better macros for ELF bitness
x86/vdso: Discard the __bug_table section
efi: Fix compiler warnings (unused, const, type)
Pull MIPS fixes from Ralf Baechle:
"This is dominated by a large number of changes necessary for the MIPS
BPF code. code. Aside of that there are
- a fix for the MSC system controller support code.
- a Turbochannel fix.
- a recordmcount fix that's MIPS-specific.
- barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere
in the kernel.
- revert support for MSA registers in the signal frames. The
reverted patch did modify the signal stack frame which of course is
inacceptable.
- fix math-emu build breakage with older compilers.
- some related cleanup.
- fix Lasat build error if CONFIG_CRC32 isn't set to y by the user"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits)
MIPS: Lasat: Fix build error if CRC32 is not enabled.
TC: Handle device_register() errors.
MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region
MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64
MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register
MIPS: bpf: Fix PKT_TYPE case for big-endian cores
MIPS: BPF: Prevent kernel fall over for >=32bit shifts
MIPS: bpf: Drop update_on_xread and always initialize the X register
MIPS: bpf: Fix is_range() semantics
MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes
MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case
MIPS: bpf: Use correct mask for VLAN_TAG case
MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases
MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE
MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases
MIPS: bpf: Return error code if the offset is a negative number
MIPS: bpf: Use the LO register to get division's quotient
MIPS: mm: uasm: Fix lh micro-assembler instruction
MIPS: uasm: Add SLT uasm instruction
MIPS: uasm: Add s3s1s2 instruction builder
...
Here is another lz4 bugfix for 3.16-rc3 that resolves a reported issue
with that compression algorithm.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlOuGXoACgkQMUfUDdst+ym2ggCgyo0pzGL72nt2lT4QjriPhLAq
3nwAnjB4x3sezmwoqlkqfhKGuRon2lMw
=Tcxf
-----END PGP SIGNATURE-----
Merge tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull compress bugfix from Greg KH:
"Here is another lz4 bugfix for 3.16-rc3 that resolves a reported issue
with that compression algorithm"
* tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
lz4: fix another possible overrun
* Don't assume that 0 as a physical address is incorrect and fail the request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTpJSbAAoJEFjIrFwIi8fJSDQH/3wm3iDUrW+yxxXofTG056v3
mO4Yl2xAuP5bTVIQWEGU/3hxkfuHF4fKdHYULbZGmVMDfmT7SfnkT67i2uCFu3y5
H7/GjZwbo5Oz6PCWrR+xAd2Xp3TuDhs24/wi7xFhWswgacZWEJzjC41jGqJEZbpB
iidyI3z7/LppJcJAxzeBjCuqj//zL26Bk2nOKNtZIdRX4G+bEpRVRDLDBo7wSUmN
BIZysIsQtid24GwiV3FsG5WQypdIFSDJRNlkIeUHOEpVd9QDuTZLU5xbtM0suwHy
mAjaNTg3uGUoUbTrvf/lNmaxg1546moj2z2gKWCYJ9aEI28kNxI/G/mJ4ml2hWQ=
=wH3p
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb bugfix from Konrad Rzeszutek Wilk:
"One bug-fix that had been in tree for quite some time. We had assumed
that the physical address zero was invalid and would fail it. But
that is not true and on some architectures it is not reserved and
valid. This fixes it"
* tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't assume PA 0 is invalid
Here includes a few patchset for fixing mostly HD-audio issues in
addition to a patch assuring the compress API bytes alignment and a
fix for the die-hard existing race condition at USB-audio
disconnection. The volume looks big in Realtek HD-audio code, but
it's just a translation of the fixup tables, and the actual changes
are rather trivial.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iKT+
-----END PGP SIGNATURE-----
Merge tag 'sound-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here includes a few patchset for fixing mostly HD-audio issues in
addition to a patch assuring the compress API bytes alignment and a
fix for the die-hard existing race condition at USB-audio
disconnection. The volume looks big in Realtek HD-audio code, but
it's just a translation of the fixup tables, and the actual changes
are rather trivial"
* tag 'sound-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - restore BCLK M/N values when resuming HSW/BDW display controller
ALSA: usb-audio: Fix races at disconnection and PCM closing
ALSA: hda - Adjust speaker HPF and add LED support for HP Spectre 13
ALSA: hda - Make the pin quirk tables use the SND_HDA_PIN_QUIRK macro
ALSA: hda - Make a SND_HDA_PIN_QUIRK macro
ALSA: hda - Add pin quirk for Dell XPS 15
ALSA: hda - hdmi: call overridden init on resume
ALSA: hda - Fix usage of "model" module parameter
ALSA: compress: fix the struct alignment to 4 bytes
Srinivas Kandagatla