Commit a695cb5816 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do echo 1 > foo/events/sched/sched_switch 2> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the write to the event
is opened, but before the enabling happens.
The solution is to make sure the trace_array is available before succeeding in
opening for write, and incerment the ref counter while opened.
Now the instance can be deleted when the events are writing to the buffer,
but the deletion of the instance will disable all events before the instance
is actually deleted.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a trace file is opened that may access a trace array, it must
increment its ref count to prevent it from being deleted.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit a695cb5816 "tracing: Prevent deleting instances when they are being read"
tried to fix a race between deleting a trace instance and reading contents
of a trace file. But it wasn't good enough. The following could crash the kernel:
# cd /sys/kernel/debug/tracing/instances
# ( while :; do mkdir foo; rmdir foo; done ) &
# ( while :; do cat foo/trace &> /dev/null; done ) &
Luckily this can only be done by root user, but it should be fixed regardless.
The problem is that a delete of the file can happen after the reader starts
to open the file but before it grabs the trace_types_mutex.
The solution is to validate the trace array before using it. If the trace
array does not exist in the list of trace arrays, then it returns -ENODEV.
There's a possibility that a trace_array could be deleted and a new one
created and the open would open its file instead. But that is very minor as
it will just return the data of the new trace array, it may confuse the user
but it will not crash the system. As this can only be done by root anyway,
the race will only occur if root is deleting what its trying to read at
the same time.
Cc: stable@vger.kernel.org # 3.10
Reported-by: Alexander Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are multiple places where the ftrace_trace_arrays list is accessed in
trace_events.c without the trace_types_lock held.
Link: http://lkml.kernel.org/r/1372732674-22726-1-git-send-email-azl@google.com
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_marker file was present for each new instance created, but it
added the trace mark to the global trace buffer instead of to
the instance's buffer.
Link: http://lkml.kernel.org/r/1372717885-4543-2-git-send-email-azl@google.com
Cc: David Sharp <dhsharp@google.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Alexander Z Lam <lambchop468@gmail.com>
Cc: stable@vger.kernel.org # 3.10
Signed-off-by: Alexander Z Lam <azl@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the kernel command line ftrace filter parameters are set
(ftrace_filter or ftrace_notrace), force the function self test to
pass, with a warning why it was forced.
If the user adds a filter to the kernel command line, it is assumed
that they know what they are doing, and the self test should just not
run instead of failing (which disables function tracing) or clearing
the filter, as that will probably annoy the user.
If the user wants the selftest to run, the message will tell them why
it did not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kprobe_perf_func() and kretprobe_perf_func() pass addr=ip to
perf_trace_buf_submit() for no reason.
This sets perf_sample_data->addr for PERF_SAMPLE_ADDR, we already
have perf_sample_data->ip initialized if PERF_SAMPLE_IP.
Link: http://lkml.kernel.org/r/20130620173811.GA13161@redhat.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ring buffer is disabled and the irqsoff tracer records a trace it
will clear out its buffer and lose the data it had previously recorded.
Currently there's a callback when writing to the tracing_of file, but if
tracing is disabled via the function tracer trigger, it will not inform
the irqsoff tracer to stop recording.
By using the "mirror" flag (buffer_disabled) in the trace_array, that keeps
track of the status of the trace_array's buffer, it gives the irqsoff
tracer a fast way to know if it should record a new trace or not.
The flag may be a little behind the real state of the buffer, but it
should not affect the trace too much. It's more important for the irqsoff
tracer to be fast.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I think that "ftrace_event_file *trace_probe[]" complicates the
code for no reason, turn it into list_head to simplify the code.
enable_trace_probe() no longer needs synchronize_sched().
This needs the extra sizeof(list_head) memory for every attached
ftrace_event_file, hopefully not a problem in this case.
Link: http://lkml.kernel.org/r/20130620173814.GA13165@redhat.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The comment on the soft disable 'disable' case of
__ftrace_event_enable_disable() states that the soft disable bit
should be cleared in that case, but currently only the soft mode bit
is actually cleared.
This essentially leaves the standard non-soft-enable enable/disable
paths as the only way to clear the soft disable flag, but the soft
disable bit should also be cleared when removing a trigger with '!'.
Also, the SOFT_DISABLED bit should never be set if SOFT_MODE is
cleared.
This fixes the above discrepancies.
Link: http://lkml.kernel.org/r/b9c68dd50bc07019e6c67d3f9b29be4ef1b2badb.1372479499.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
enable_trace_probe() and disable_trace_probe() should not worry about
serialization, the caller (perf_trace_init or __ftrace_set_clr_event)
holds event_mutex.
They are also called by kprobe_trace_self_tests_init(), but this __init
function can't race with itself or trace_events.c
And note that this code depended on event_mutex even before 41a7dd420c
which introduced probe_enable_lock. In fact it assumes that the caller
kprobe_register() can never race with itself. Otherwise, say, tp->flags
manipulations are racy.
Link: http://lkml.kernel.org/r/20130620173809.GA13158@redhat.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
perf_trace_buf_prepare() + perf_trace_buf_submit() make no sense
if this task/CPU has no active counters. Change kprobe_perf_func()
and kretprobe_perf_func() to check call->perf_events beforehand
and return if this list is empty.
For example, "perf record -e some_probe -p1". Only /sbin/init will
report, all other threads which hit the same probe will do
perf_trace_buf_prepare/perf_trace_buf_submit just to realize that
nobody wants perf_swevent_event().
Link: http://lkml.kernel.org/r/20130620173806.GA13151@redhat.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running the following:
# cd /sys/kernel/debug/tracing
# echo p:i do_sys_open > kprobe_events
# echo p:j schedule >> kprobe_events
# cat kprobe_events
p:kprobes/i do_sys_open
p:kprobes/j schedule
# echo p:i do_sys_open >> kprobe_events
# cat kprobe_events
p:kprobes/j schedule
p:kprobes/i do_sys_open
# ls /sys/kernel/debug/tracing/events/kprobes/
enable filter j
Notice that the 'i' is missing from the kprobes directory.
The console produces:
"Failed to create system directory kprobes"
This is because kprobes passes in a allocated name for the system
and the ftrace event subsystem saves off that name instead of creating
a duplicate for it. But the kprobes may free the system name making
the pointer to it invalid.
This bug was introduced by 92edca073c "tracing: Use direct field, type
and system names" which switched from using kstrdup() on the system name
in favor of just keeping apointer to it, as the internal ftrace event
system names are static and exist for the life of the computer being booted.
Instead of reverting back to duplicating system names again, we can use
core_kernel_data() to determine if the passed in name was allocated or
static. Then use the MSB of the ref_count to be a flag to keep track if
the name was allocated or not. Then we can still save from having to duplicate
strings that will always exist, but still copy the ones that may be freed.
Cc: stable@vger.kernel.org # 3.10
Reported-by: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com>
Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since tp->flags assignment was moved into function enable_trace_probe(),
there is no need to use trace_probe_is_enabled to check flags
in the same function.
Remove the unnecessary checking.
Link: http://lkml.kernel.org/r/51BA7B9E.3040807@huawei.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a traceoff_on_warning option in both the kernel command line as well
as a sysctl option. When set, any WARN*() function that is hit will cause
the tracing_on variable to be cleared, which disables writing to the
ring buffer.
This is useful especially when tracing a bug with function tracing. When
a warning is hit, the print caused by the warning can flood the trace with
the functions that producing the output for the warning. This can make the
resulting trace useless by either hiding where the bug happened, or worse,
by overflowing the buffer and losing the trace of the bug totally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are some cases when filtering on a set flag of a field of a tracepoint
is useful. But currently the only filtering commands for numbered fields
is ==, !=, <, <=, >, >=. This does not help when you just want to trace if
a specific flag is set. For example:
> # sudo trace-cmd record -e brcmfmac:brcmf_dbg -f 'level & 0x40000'
> disable all
> enable brcmfmac:brcmf_dbg
> path = /sys/kernel/debug/tracing/events/brcmfmac/brcmf_dbg/enable
> (level & 0x40000)
> ^
> parse_error: Invalid operator
>
When trying to trace brcmf_dbg when level has its 1 << 18 bit set, the
filter fails to perform.
By allowing a binary '&' operation, this gives the user the ability to
test a bit.
Note, a binary '|' is not added, as it doesn't make sense as fields must
be compared to constants (for now), and ORing a constant will always return
true.
Link: http://lkml.kernel.org/r/1371057385.9844.261.camel@gandalf.local.home
Suggested-by: Arend van Spriel <arend@broadcom.com>
Tested-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer uses preempt_disable/enable_notrace() for
synchronization between reading registered ftrace_ops and unregistering
them.
Most of the ftrace_ops are global permanent structures that do not
require this synchronization. That is, ops may be added and removed from
the hlist but are never freed, and wont hurt if a synchronization is
missed.
But this is not true for dynamically created ftrace_ops or control_ops,
which are used by the perf function tracing.
The problem here is that the function tracer can be used to trace
kernel/user context switches as well as going to and from idle.
Basically, it can be used to trace blind spots of the RCU subsystem.
This means that even though preempt_disable() is done, a
synchronize_sched() will ignore CPUs that haven't made it out of user
space or idle. These can include functions that are being traced just
before entering or exiting the kernel sections.
To implement the RCU synchronization, instead of using
synchronize_sched() the use of schedule_on_each_cpu() is performed. This
means that when a dynamically allocated ftrace_ops, or a control ops is
being unregistered, all CPUs must be touched and execute a ftrace_sync()
stub function via the work queues. This will rip CPUs out from idle or
in dynamic tick mode. This only happens when a user disables perf
function tracing or other dynamically allocated function tracers, but it
allows us to continue to debug RCU and context tracking with function
tracing.
Link: http://lkml.kernel.org/r/1369785676.15552.55.camel@gandalf.local.home
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 4f271a2a60
(tracing: Add a proc file to stop tracing and free buffer)
implement a method to free up ring buffer in kernel memory
in the release code path of free_buffer's fd.
Then we don't need read/write support for free_buffer,
indeed we just have a dummy write fop, and don't implement read fop.
So the 0200 is more reasonable file mode for free_buffer than
the current file mode 0644.
Link: http://lkml.kernel.org/r/20130526085201.GA3183@udknight
Acked-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Acked-by: David Sharp <dhsharp@google.com>
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "cpudump" command to have the current CPU ftrace buffer dumped
to console if a function is hit. This is useful when debugging a
tripple fault, where you have an idea of a function that is called
just before the tripple fault occurs, and can tell ftrace to dump its
content out to the console before it continues.
This differs from the "dump" command as it only dumps the content of
the ring buffer for the currently executing CPU, and does not show
the contents of the other CPUs.
Format is:
<function>:cpudump
echo 'bad_address:cpudump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:cpudump' > /debug/tracing/set_ftrace_filter
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "dump" command to have the ftrace buffer dumped to console if
a function is hit. This is useful when debugging a tripple fault,
where you have an idea of a function that is called just before the
tripple fault occurs, and can tell ftrace to dump its content out
to the console before it continues.
Format is:
<function>:dump
echo 'bad_address:dump' > /debug/tracing/set_ftrace_filter
To remove this:
echo '!bad_address:dump' > /debug/tracing/set_ftrace_filter
Requested-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Outputting formats of x86-tsc and counter should be a raw format, but after
applying the patch(2b6080f28c), the format was
changed to nanosec. This is because the global variable trace_clock_id was used.
When we use multiple buffers, clock_id of each sub-buffer should be used. Then,
this patch uses tr->clock_id instead of the global variable trace_clock_id.
[ Basically, this fixes a regression where the multibuffer code changed the
trace_clock file to update tr->clock_id but the traces still use the old
global trace_clock_id variable, negating the file's effect. The global
trace_clock_id variable is obsolete and removed. - SR ]
Link: http://lkml.kernel.org/r/20130423013239.22334.7394.stgit@yunodevel
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The irqsoff tracer records the max time that interrupts are disabled.
There are hooks in the assembly code that calls back into the tracer when
interrupts are disabled or enabled.
When they are enabled, the tracer checks if the amount of time they
were disabled is larger than the previous recorded max interrupts off
time. If it is, it creates a snapshot of the currently running trace
to store where the last largest interrupts off time was held and how
it happened.
During testing, this RCU lockdep dump appeared:
[ 1257.829021] ===============================
[ 1257.829021] [ INFO: suspicious RCU usage. ]
[ 1257.829021] 3.10.0-rc1-test+ #171 Tainted: G W
[ 1257.829021] -------------------------------
[ 1257.829021] /home/rostedt/work/git/linux-trace.git/include/linux/rcupdate.h:780 rcu_read_lock() used illegally while idle!
[ 1257.829021]
[ 1257.829021] other info that might help us debug this:
[ 1257.829021]
[ 1257.829021]
[ 1257.829021] RCU used illegally from idle CPU!
[ 1257.829021] rcu_scheduler_active = 1, debug_locks = 0
[ 1257.829021] RCU used illegally from extended quiescent state!
[ 1257.829021] 2 locks held by trace-cmd/4831:
[ 1257.829021] #0: (max_trace_lock){......}, at: [<ffffffff810e2b77>] stop_critical_timing+0x1a3/0x209
[ 1257.829021] #1: (rcu_read_lock){.+.+..}, at: [<ffffffff810dae5a>] __update_max_tr+0x88/0x1ee
[ 1257.829021]
[ 1257.829021] stack backtrace:
[ 1257.829021] CPU: 3 PID: 4831 Comm: trace-cmd Tainted: G W 3.10.0-rc1-test+ #171
[ 1257.829021] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
[ 1257.829021] 0000000000000001 ffff880065f49da8 ffffffff8153dd2b ffff880065f49dd8
[ 1257.829021] ffffffff81092a00 ffff88006bd78680 ffff88007add7500 0000000000000003
[ 1257.829021] ffff88006bd78680 ffff880065f49e18 ffffffff810daebf ffffffff810dae5a
[ 1257.829021] Call Trace:
[ 1257.829021] [<ffffffff8153dd2b>] dump_stack+0x19/0x1b
[ 1257.829021] [<ffffffff81092a00>] lockdep_rcu_suspicious+0x109/0x112
[ 1257.829021] [<ffffffff810daebf>] __update_max_tr+0xed/0x1ee
[ 1257.829021] [<ffffffff810dae5a>] ? __update_max_tr+0x88/0x1ee
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810dbf85>] update_max_tr_single+0x11d/0x12d
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e2b15>] stop_critical_timing+0x141/0x209
[ 1257.829021] [<ffffffff8109569a>] ? trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810e3057>] time_hardirqs_on+0x2a/0x2f
[ 1257.829021] [<ffffffff811002b9>] ? user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff8109550c>] trace_hardirqs_on_caller+0x16/0x197
[ 1257.829021] [<ffffffff8109569a>] trace_hardirqs_on+0xd/0xf
[ 1257.829021] [<ffffffff811002b9>] user_enter+0xfd/0x107
[ 1257.829021] [<ffffffff810029b4>] do_notify_resume+0x92/0x97
[ 1257.829021] [<ffffffff8154bdca>] int_signal+0x12/0x17
What happened was entering into the user code, the interrupts were enabled
and a max interrupts off was recorded. The trace buffer was saved along with
various information about the task: comm, pid, uid, priority, etc.
The uid is recorded with task_uid(tsk). But this is a macro that uses rcu_read_lock()
to retrieve the data, and this happened to happen where RCU is blind (user_enter).
As only the preempt and irqs off tracers can have this happen, and they both
only have the tsk == current, if tsk == current, use current_uid() instead of
task_uid(), as current_uid() does not use RCU as only current can change its uid.
This fixes the RCU suspicious splat.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The branch selftest calls trace_test_buffer(), but with the new code
it expects the first parameter to be a pointer to a struct trace_buffer.
All self tests were changed but the branch selftest was missed.
This caused either a crash or failed test when the branch selftest was
enabled.
Link: http://lkml.kernel.org/r/20130529141333.GA24064@localhost
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As rcu_dereference_raw() under RCU debug config options can add quite a
bit of checks, and that tracing uses rcu_dereference_raw(), these checks
happen with the function tracer. The function tracer also happens to trace
these debug checks too. This added overhead can livelock the system.
Have the function tracer use the new RCU _notrace equivalents that do
not do the debug checks for RCU.
Link: http://lkml.kernel.org/r/20130528184209.467603904@goodmis.org
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing infrastructure sets up for possible CPUs, but it uses
the ring buffer polling, it is possible to call the ring buffer
polling code with a CPU that hasn't been allocated. This will cause
a kernel oops when it access a ring buffer cpu buffer that is part
of the possible cpus but hasn't been allocated yet as the CPU has never
been online.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If ftrace=<tracer> is on the kernel command line, when that tracer is
registered, it will be initiated by tracing_set_tracer() to execute that
tracer.
The nop tracer is just a stub tracer that is used to have no tracer
enabled. It is assigned at early bootup as it is the default tracer.
But if ftrace=nop is on the kernel command line, the registering of the
nop tracer will call tracing_set_tracer() which will try to execute
the nop tracer. But it expects tr->current_trace to be assigned something
as it usually is assigned to the nop tracer. As it hasn't been assigned
to anything yet, it causes the system to crash.
The simple fix is to move the tr->current_trace = nop before registering
the nop tracer. The functionality is still the same as the nop tracer
doesn't do anything anyway.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since try_module_get() returns false( = 0) when it fails to
pindown a module, event_enable_func() returns 0 which means
"succeed". This can cause a kernel panic when the entry
is removed, because the event is already released.
This fixes the bug by returning -EBUSY, because the reason
why it fails is that the module is being removed at that time.
Link: http://lkml.kernel.org/r/20130516114848.13508.97899.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to sparse warning, print_*probe_event static because
those functions are not directly called from outside.
Link: http://lkml.kernel.org/r/20130513115839.6545.83067.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use rcu_dereference_raw() for accessing tp->files. Because the
write-side uses rcu_assign_pointer() for memory barrier,
the read-side also has to use rcu_dereference_raw() with
read memory barrier.
Link: http://lkml.kernel.org/r/20130513115834.6545.17022.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Special preds are created when folding a series of preds that
can be done in serial. These are allocated in an ops field of
the pred structure. But they were never freed, causing memory
leaks.
This was discovered using the kmemleak checker:
unreferenced object 0xffff8800797fd5e0 (size 32):
comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s)
hex dump (first 32 bytes):
00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff814b52af>] kmemleak_alloc+0x73/0x98
[<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18
[<ffffffff81120e68>] __kmalloc+0xd7/0x125
[<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f
[<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4
[<ffffffff810d3781>] walk_pred_tree+0x47/0xcc
[<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f
[<ffffffff810d50b5>] create_filter+0x4e/0x8b
[<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155
[<ffffffff8100028d>] do_one_initcall+0xa0/0x137
[<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc
[<ffffffff814b24b7>] kernel_init+0xe/0xdb
[<ffffffff814d539c>] ret_from_fork+0x7c/0xb0
[<ffffffffffffffff>] 0xffffffffffffffff
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
kprobes up to par with the latest changes to ftrace (multi buffering
and the new function probes).
He also discovered and fixed some bugs in doing so. When pulling in his
patches, I also found a few minor bugs as well and fixed them.
This also includes a compile fix for some archs that select the ring buffer
but not tracing.
I based this off of the last patch you took from me that fixed the merge
conflict error, as that was the commit that had all the changes I needed
for this set of changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRjYnJAAoJEOdOSU1xswtMg9EH/iFs438FgrNMk2ZdQftmqcqA
cqcactHo1mmoHjAoLZT/oDBjEThhVUuqzMXrFRutSYcTh4PsQEC3arX0mpsC+T12
UEEV/tZS3TXH+GXEyrOit/O3kzntQcDHwJDV4+0n80IrJmw4IDZbnV3R8DWjS6wp
so+dq0A1pwehcG/upgpw1oTKsGv1G/p6vyf968B6W44icHEClLiph4JE2kzE6D3r
fzSpOLaQoBEvwIRf6xRKxi240VqIItXwfG7pwNpPpSC37gRLzm74zGr+Sj93/k1y
pARbZ/5XO7/pcVYQYupErRAoV5in+QMZ67k5G1vQIvyOS9r039catbQf/7PkzcI=
=EZCE
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing/kprobes update from Steven Rostedt:
"The majority of these changes are from Masami Hiramatsu bringing
kprobes up to par with the latest changes to ftrace (multi buffering
and the new function probes).
He also discovered and fixed some bugs in doing so. When pulling in
his patches, I also found a few minor bugs as well and fixed them.
This also includes a compile fix for some archs that select the ring
buffer but not tracing.
I based this off of the last patch you took from me that fixed the
merge conflict error, as that was the commit that had all the changes
I needed for this set of changes."
* tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Support soft-mode disabling
tracing/kprobes: Support ftrace_event_file base multibuffer
tracing/kprobes: Pass trace_probe directly from dispatcher
tracing/kprobes: Increment probe hit-count even if it is used by perf
tracing/kprobes: Use bool for retprobe checker
ftrace: Fix function probe when more than one probe is added
ftrace: Fix the output of enabled_functions debug file
ftrace: Fix locking in register_ftrace_function_probe()
tracing: Add helper function trace_create_new_event() to remove duplicate code
tracing: Modify soft-mode only if there's no other referrer
tracing: Indicate enabled soft-mode in enable file
tracing/kprobes: Fix to increment return event probe hit-count
ftrace: Cleanup regex_lock and ftrace_lock around hash updating
ftrace, kprobes: Fix a deadlock on ftrace_regex_lock
ftrace: Have ftrace_regex_write() return either read or error
tracing: Return error if register_ftrace_function_probe() fails for event_enable_func()
tracing: Don't succeed if event_enable_func did not register anything
ring-buffer: Select IRQ_WORK
Support soft-mode disabling on kprobe-based dynamic events.
Soft-disabling is just ignoring recording if the soft disabled
flag is set.
Link: http://lkml.kernel.org/r/20130509054454.30398.7237.stgit@mhiramat-M0-7522
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Increment probe hit-count for profiling even if it is used
by perf tool. Same thing has already done in trace_uprobe.
Link: http://lkml.kernel.org/r/20130509054436.30398.21133.stgit@mhiramat-M0-7522
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The enabled_functions debugfs file was created to be able to see
what functions have been modified from nops to calling a tracer.
The current method uses the counter in the function record.
As when a ftrace_ops is registered to a function, its count
increases. But that doesn't mean that the function is actively
being traced. /proc/sys/kernel/ftrace_enabled can be set to zero
which would disable it, as well as something can go wrong and
we can think its enabled when only the counter is set.
The record's FTRACE_FL_ENABLED flag is set or cleared when its
function is modified. That is a much more accurate way of knowing
what function is enabled or not.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The iteration of the ftrace function list and the call to
ftrace_match_record() need to be protected by the ftrace_lock.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both __trace_add_new_event() and __trace_early_add_new_event() do
basically the same thing, except that __trace_add_new_event() does
a little more.
Instead of having duplicate code between the two functions, add
a helper function trace_create_new_event() that both can use.
This will help against having bugs fixed in one function but not
the other.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Modify soft-mode flag only if no other soft-mode referrer
(currently only the ftrace triggers) by using a reference
counter in each ftrace_event_file.
Without this fix, adding and removing several different
enable/disable_event triggers on the same event clear
soft-mode bit from the ftrace_event_file. This also
happens with a typo of glob on setting triggers.
e.g.
# echo vfs_symlink:enable_event:net:netif_rx > set_ftrace_filter
# cat events/net/netif_rx/enable
0*
# echo typo_func:enable_event:net:netif_rx > set_ftrace_filter
# cat events/net/netif_rx/enable
0
# cat set_ftrace_filter
#### all functions enabled ####
vfs_symlink:enable_event:net:netif_rx:unlimited
As above, we still have a trigger, but soft-mode is gone.
Link: http://lkml.kernel.org/r/20130509054429.30398.7464.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Indicate enabled soft-mode event as "1*" in "enable" file
for each event, because it can be soft-disabled when disable_event
trigger is hit.
Link: http://lkml.kernel.org/r/20130509054426.30398.28202.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cleanup regex_lock and ftrace_lock locking points around
ftrace_ops hash update code.
The new rule is that regex_lock protects ops->*_hash
read-update-write code for each ftrace_ops. Usually,
hash update is done by following sequence.
1. allocate a new local hash and copy the original hash.
2. update the local hash.
3. move(actually, copy) back the local hash to ftrace_ops.
4. update ftrace entries if needed.
5. release the local hash.
This makes regex_lock protect #1-#4, and ftrace_lock
to protect #3, #4 and adding and removing ftrace_ops from the
ftrace_ops_list. The ftrace_lock protects #3 as well because
the move functions update the entries too.
Link: http://lkml.kernel.org/r/20130509054421.30398.83411.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix a deadlock on ftrace_regex_lock which happens when setting
an enable_event trigger on dynamic kprobe event as below.
----
sh-2.05b# echo p vfs_symlink > kprobe_events
sh-2.05b# echo vfs_symlink:enable_event:kprobes:p_vfs_symlink_0 > set_ftrace_filter
=============================================
[ INFO: possible recursive locking detected ]
3.9.0+ #35 Not tainted
---------------------------------------------
sh/72 is trying to acquire lock:
(ftrace_regex_lock){+.+.+.}, at: [<ffffffff810ba6c1>] ftrace_set_hash+0x81/0x1f0
but task is already holding lock:
(ftrace_regex_lock){+.+.+.}, at: [<ffffffff810b7cbd>] ftrace_regex_write.isra.29.part.30+0x3d/0x220
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(ftrace_regex_lock);
lock(ftrace_regex_lock);
*** DEADLOCK ***
----
To fix that, this introduces a finer regex_lock for each ftrace_ops.
ftrace_regex_lock is too big of a lock which protects all
filter/notrace_hash operations, but it doesn't need to be a global
lock after supporting multiple ftrace_ops because each ftrace_ops
has its own filter/notrace_hash.
Link: http://lkml.kernel.org/r/20130509054417.30398.84254.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ Added initialization flag and automate mutex initialization for
non ftrace.c ftrace_probes. ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_regex_write() reads the result of ftrace_process_regex()
which can sometimes return a positive number, only consider a
failure if the return is negative. Otherwise, it will skip possible
other registered probes and by returning a positive number that
wasn't read, it will confuse the user processes doing the writing.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
register_ftrace_function_probe() returns the number of functions
it registered, which can be zero, it can also return a negative number
if something went wrong. But event_enable_func() only checks for
the case that it didn't register anything, it needs to also check
for the case that something went wrong and return that error code
as well.
Added some comments about the code as well, to make it more
understandable.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Return 0 instead of the number of activated ftrace function probes if
event_enable_func succeeded and return an error code if it failed or
did not register any functions. But it currently returns the number
of registered functions and if it didn't register anything, it returns 0,
but that is considered success.
This also fixes the return value. As if it succeeds, it returns the
number of functions that were enabled, which is returned back to
the user in ftrace_regex_write (the write() return code). If only
one function is enabled, then the return code of the write is one,
and this can confuse the user program in thinking it only wrote 1
byte.
Link: http://lkml.kernel.org/r/20130509054413.30398.55650.stgit@mhiramat-M0-7522
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
[ Rewrote change log to reflect that this fixes two bugs - SR ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block driver updates from Jens Axboe:
"It might look big in volume, but when categorized, not a lot of
drivers are touched. The pull request contains:
- mtip32xx fixes from Micron.
- A slew of drbd updates, this time in a nicer series.
- bcache, a flash/ssd caching framework from Kent.
- Fixes for cciss"
* 'for-3.10/drivers' of git://git.kernel.dk/linux-block: (66 commits)
bcache: Use bd_link_disk_holder()
bcache: Allocator cleanup/fixes
cciss: bug fix to prevent cciss from loading in kdump crash kernel
cciss: add cciss_allow_hpsa module parameter
drivers/block/mg_disk.c: add CONFIG_PM_SLEEP to suspend/resume functions
mtip32xx: Workaround for unaligned writes
bcache: Make sure blocksize isn't smaller than device blocksize
bcache: Fix merge_bvec_fn usage for when it modifies the bvm
bcache: Correctly check against BIO_MAX_PAGES
bcache: Hack around stuff that clones up to bi_max_vecs
bcache: Set ra_pages based on backing device's ra_pages
bcache: Take data offset from the bdev superblock.
mtip32xx: mtip32xx: Disable TRIM support
mtip32xx: fix a smatch warning
bcache: Disable broken btree fuzz tester
bcache: Fix a format string overflow
bcache: Fix a minor memory leak on device teardown
bcache: Documentation updates
bcache: Use WARN_ONCE() instead of __WARN()
bcache: Add missing #include <linux/prefetch.h>
...
As the wake up logic for waiters on the buffer has been moved
from the tracing code to the ring buffer, it requires also adding
IRQ_WORK as the wake up code is performed via irq_work.
This fixes compile breakage when a user of the ring buffer is selected
but tracing and irq_work are not.
Link http://lkml.kernel.org/r/20130503115332.GT8356@rric.localhost
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Robert Richter <rric@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf updates from Ingo Molnar:
"Features:
- Add "uretprobes" - an optimization to uprobes, like kretprobes are
an optimization to kprobes. "perf probe -x file sym%return" now
works like kretprobes. By Oleg Nesterov.
- Introduce per core aggregation in 'perf stat', from Stephane
Eranian.
- Add memory profiling via PEBS, from Stephane Eranian.
- Event group view for 'annotate' in --stdio, --tui and --gtk, from
Namhyung Kim.
- Add support for AMD NB and L2I "uncore" counters, by Jacob Shin.
- Add Ivy Bridge-EP uncore support, by Zheng Yan
- IBM zEnterprise EC12 oprofile support patchlet from Robert Richter.
- Add perf test entries for checking breakpoint overflow signal
handler issues, from Jiri Olsa.
- Add perf test entry for for checking number of EXIT events, from
Namhyung Kim.
- Add perf test entries for checking --cpu in record and stat, from
Jiri Olsa.
- Introduce perf stat --repeat forever, from Frederik Deweerdt.
- Add --no-demangle to report/top, from Namhyung Kim.
- PowerPC fixes plus a couple of cleanups/optimizations in uprobes
and trace_uprobes, by Oleg Nesterov.
Various fixes and refactorings:
- Fix dependency of the python binding wrt libtraceevent, from
Naohiro Aota.
- Simplify some perf_evlist methods and to allow 'stat' to share code
with 'record' and 'trace', by Arnaldo Carvalho de Melo.
- Remove dead code in related to libtraceevent integration, from
Namhyung Kim.
- Revert "perf sched: Handle PERF_RECORD_EXIT events" to get 'perf
sched lat' back working, by Arnaldo Carvalho de Melo
- We don't use Newt anymore, just plain libslang, by Arnaldo Carvalho
de Melo.
- Kill a bunch of die() calls, from Namhyung Kim.
- Fix build on non-glibc systems due to libio.h absence, from Cody P
Schafer.
- Remove some perf_session and tracing dead code, from David Ahern.
- Honor parallel jobs, fix from Borislav Petkov
- Introduce tools/lib/lk library, initially just removing duplication
among tools/perf and tools/vm. from Borislav Petkov
... and many more I missed to list, see the shortlog and git log for
more details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (136 commits)
perf/x86/intel/P4: Robistify P4 PMU types
perf/x86/amd: Fix AMD NB and L2I "uncore" support
perf/x86/amd: Remove old-style NB counter support from perf_event_amd.c
perf/x86: Check all MSRs before passing hw check
perf/x86/amd: Add support for AMD NB and L2I "uncore" counters
perf/x86/intel: Add Ivy Bridge-EP uncore support
perf/x86/intel: Fix SNB-EP CBO and PCU uncore PMU filter management
perf/x86: Avoid kfree() in CPU_{STARTING,DYING}
uprobes/perf: Avoid perf_trace_buf_prepare/submit if ->perf_events is empty
uprobes/tracing: Don't pass addr=ip to perf_trace_buf_submit()
uprobes/tracing: Change create_trace_uprobe() to support uretprobes
uprobes/tracing: Make seq_printf() code uretprobe-friendly
uprobes/tracing: Make register_uprobe_event() paths uretprobe-friendly
uprobes/tracing: Make uprobe_{trace,perf}_print() uretprobe-friendly
uprobes/tracing: Introduce is_ret_probe() and uretprobe_dispatcher()
uprobes/tracing: Introduce uprobe_{trace,perf}_print() helpers
uprobes/tracing: Generalize struct uprobe_trace_entry_head
uprobes/tracing: Kill the pointless local_save_flags/preempt_count calls
uprobes/tracing: Kill the pointless seq_print_ip_sym() call
uprobes/tracing: Kill the pointless task_pt_regs() calls
...
During the 3.10 merge, a conflict happened and the resolution was
almost, but not quite, correct. An if statement was reversed.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
[ Duh. That was just silly of me - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few years.
I even heard that Google was about to implement it themselves. I finally
had time and cleaned up the code such that you can now create multiple
instances of the ftrace buffer and have different events go to different
buffers. This way, a low frequency event will not be lost in the noise
of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie. function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will make
it easier to interleave the perf and ftrace data for analysis.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJRfnTPAAoJEOdOSU1xswtMqYYH/1WIdrwXmxHflErnYkCIr3sU
QtYae2K5A1HcgiqOvRJrdWMOt016iMx5CaQQyBFM1vvMiPY0sTWRmwNxDfZzz9LN
10jRvWEzZSLtzl+a9mkFWLEpr5nR/QODOxkWFCnRWscp46sp04LSTxGDYsOnPQZB
sam/AQ1h4xA+DqDBChm9BDEUEPorGleTlN54LBaCGgSFGvrbF+eAg2s4vHNAQAvQ
8d5xjSE9zC7J+FqbVxvJTbKI3+EqKL6hMsJKsKfi0SI+FuxBaFMSltXck5zKyTI4
HpNJzXCmw+v90Tju7oMkPHh6RTbESPCHoGU+wqE52fM6m7oScVeuI/kfc6USwU4=
=W1n+
-----END PGP SIGNATURE-----
Merge tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Along with the usual minor fixes and clean ups there are a few major
changes with this pull request.
1) Multiple buffers for the ftrace facility
This feature has been requested by many people over the last few
years. I even heard that Google was about to implement it themselves.
I finally had time and cleaned up the code such that you can now
create multiple instances of the ftrace buffer and have different
events go to different buffers. This way, a low frequency event will
not be lost in the noise of a high frequency event.
Note, currently only events can go to different buffers, the tracers
(ie function, function_graph and the latency tracers) still can only
be written to the main buffer.
2) The function tracer triggers have now been extended.
The function tracer had two triggers. One to enable tracing when a
function is hit, and one to disable tracing. Now you can record a
stack trace on a single (or many) function(s), take a snapshot of the
buffer (copy it to the snapshot buffer), and you can enable or disable
an event to be traced when a function is hit.
3) A perf clock has been added.
A "perf" clock can be chosen to be used when tracing. This will cause
ftrace to use the same clock as perf uses, and hopefully this will
make it easier to interleave the perf and ftrace data for analysis."
* tag 'trace-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (82 commits)
tracepoints: Prevent null probe from being added
tracing: Compare to 1 instead of zero for is_signed_type()
tracing: Remove obsolete macro guard _TRACE_PROFILE_INIT
ftrace: Get rid of ftrace_profile_bits
tracing: Check return value of tracing_init_dentry()
tracing: Get rid of unneeded key calculation in ftrace_hash_move()
tracing: Reset ftrace_graph_filter_enabled if count is zero
tracing: Fix off-by-one on allocating stat->pages
kernel: tracing: Use strlcpy instead of strncpy
tracing: Update debugfs README file
tracing: Fix ftrace_dump()
tracing: Rename trace_event_mutex to trace_event_sem
tracing: Fix comment about prefix in arch_syscall_match_sym_name()
tracing: Convert trace_destroy_fields() to static
tracing: Move find_event_field() into trace_events.c
tracing: Use TRACE_MAX_PRINT instead of constant
tracing: Use pr_warn_once instead of open coded implementation
ring-buffer: Add ring buffer startup selftest
tracing: Bring Documentation/trace/ftrace.txt up to date
tracing: Add "perf" trace_clock
...
Conflicts:
kernel/trace/ftrace.c
kernel/trace/trace.c
Conflicts:
arch/x86/kernel/cpu/perf_event_intel.c
Merge in the latest fixes before applying new patches, resolve the conflict.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 3a366e614d.
Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.
Jens says:
"It's not quite clear why that is yet, so I think we should just revert
the commit for 3.9 final (which I'm assuming is pretty close).
The wifi is crap at the LSF hotel, so sending this email instead of
queueing up a revert and pull request."
Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perf_trace_buf_prepare() + perf_trace_buf_submit() make no sense
if this task/CPU has no active counters. Change uprobe_perf_print()
to return if hlist_empty(call->perf_events).
Note: this is not uprobe-specific, we can change other users too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
uprobe_perf_print() passes addr=ip to perf_trace_buf_submit() for
no reason. This sets perf_sample_data->addr for PERF_SAMPLE_ADDR,
we already have perf_sample_data->ip initialized if PERF_SAMPLE_IP.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Finally change create_trace_uprobe() to check if argv[0][0] == 'r'
and pass the correct "is_ret" to alloc_trace_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change probes_seq_show() and print_uprobe_event() to check
is_ret_probe() and print the correct data.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change uprobe_event_define_fields(), and __set_print_fmt() to check
is_ret_probe() and use the appropriate format/fields.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Change uprobe_trace_print() and uprobe_perf_print() to check
is_ret_probe() and fill ring_buffer_event accordingly.
Also change uprobe_trace_func() and uprobe_perf_func() to not
_print() if is_ret_probe() is true. Note that we keep ->handler()
nontrivial even for uretprobe, we need this for filtering and for
other potential extensions.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Create the new functions we need to support uretprobes, and change
alloc_trace_uprobe() to initialize consumer.ret_handler if the new
"is_ret" argument is true. Curently this argument is always false,
so the new code is never called and is_ret_probe(tu) is false too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
Extract the output code from uprobe_trace_func() and uprobe_perf_func()
into the new helpers, they will be used by ->ret_handler() too. We also
add the unused "unsigned long func" argument in advance, to simplify the
next changes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
struct uprobe_trace_entry_head has a single member for reporting,
"unsigned long ip". If we want to support uretprobes we need to
create another struct which has "func" and "ret_ip" and duplicate
a lot of functions, like trace_kprobe.c does.
To avoid this copy-and-paste horror we turn ->ip into ->vaddr[]
and add couple of trivial helpers to calculate sizeof/data. This
uglifies the code a bit, but this allows us to avoid a lot more
complications later, when we add the support for ret-probes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
uprobe_trace_func() is never called with irqs or preemption
disabled, no need to ask preempt_count() or local_save_flags().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Anton Arapov <anton@redhat.com>
seq_print_ip_sym(ip) in print_uprobe_event() is pointless,
kallsyms_lookup(ip) can not resolve a user-space address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
uprobe_trace_func() and uprobe_perf_func() do not need task_pt_regs(),
we already have "struct pt_regs *regs".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Anton Arapov <anton@redhat.com>
It seems that function profiler's hash size is fixed at 1024. Add and
use FTRACE_PROFILE_HASH_BITS instead and update hash size macro.
Link: http://lkml.kernel.org/r/1365551750-4504-1-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_graph_count can be decreased with a "!" pattern, so that
the enabled flag should be updated too.
Link: http://lkml.kernel.org/r/1365663698-2413-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.
Cc: stable@vger.kernel.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops. However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.
It can be easily reproduced with following command:
$ cd /sys/kernel/debug/tracing
$ echo 1234 | sudo tee -a set_ftrace_pid
In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().
Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On the failure path, stat->start and stat->pages will refer same page.
So it'll attempt to free the same page again and get kernel panic.
Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use strlcpy() instead of strncpy() as it will always add a '\0'
to the end of the string even if the buffer is smaller than what
is being copied.
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing control loop used by perf spits out a warning
if the called function is not a control function. This is because
the control function references a per cpu allocated data structure
on struct ftrace_ops that is not allocated for other types of
functions.
commit 0a016409e4 "ftrace: Optimize the function tracer list loop"
Had an optimization done to all function tracing loops to optimize
for a single registered ops. Unfortunately, this allows for a slight
race when tracing starts or ends, where the stub function might be
called after the current registered ops is removed. In this case we
get the following dump:
root# perf stat -e ftrace:function sleep 1
[ 74.339105] WARNING: at include/linux/ftrace.h:209 ftrace_ops_control_func+0xde/0xf0()
[ 74.349522] Hardware name: PRIMERGY RX200 S6
[ 74.357149] Modules linked in: sg igb iTCO_wdt ptp pps_core iTCO_vendor_support i7core_edac dca lpc_ich i2c_i801 coretemp edac_core crc32c_intel mfd_core ghash_clmulni_intel dm_multipath acpi_power_meter pcspk
r microcode vhost_net tun macvtap macvlan nfsd kvm_intel kvm auth_rpcgss nfs_acl lockd sunrpc uinput xfs libcrc32c sd_mod crc_t10dif sr_mod cdrom mgag200 i2c_algo_bit drm_kms_helper ttm qla2xxx mptsas ahci drm li
bahci scsi_transport_sas mptscsih libata scsi_transport_fc i2c_core mptbase scsi_tgt dm_mirror dm_region_hash dm_log dm_mod
[ 74.446233] Pid: 1377, comm: perf Tainted: G W 3.9.0-rc1 #1
[ 74.453458] Call Trace:
[ 74.456233] [<ffffffff81062e3f>] warn_slowpath_common+0x7f/0xc0
[ 74.462997] [<ffffffff810fbc60>] ? rcu_note_context_switch+0xa0/0xa0
[ 74.470272] [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[ 74.478117] [<ffffffff81062e9a>] warn_slowpath_null+0x1a/0x20
[ 74.484681] [<ffffffff81102ede>] ftrace_ops_control_func+0xde/0xf0
[ 74.491760] [<ffffffff8162f400>] ftrace_call+0x5/0x2f
[ 74.497511] [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[ 74.503486] [<ffffffff8162f400>] ? ftrace_call+0x5/0x2f
[ 74.509500] [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[ 74.516088] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.522268] [<ffffffff810fbc65>] ? synchronize_sched+0x5/0x50
[ 74.528837] [<ffffffff811041a2>] ? __unregister_ftrace_function+0xa2/0x1a0
[ 74.536696] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.542878] [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[ 74.548869] [<ffffffff81105c67>] unregister_ftrace_function+0x27/0x50
[ 74.556243] [<ffffffff8111eadf>] perf_ftrace_event_register+0x9f/0x140
[ 74.563709] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.569887] [<ffffffff8162402d>] ? mutex_lock+0x1d/0x50
[ 74.575898] [<ffffffff8111e94e>] perf_trace_destroy+0x2e/0x50
[ 74.582505] [<ffffffff81127ba9>] tp_perf_event_destroy+0x9/0x10
[ 74.589298] [<ffffffff811295d0>] free_event+0x70/0x1a0
[ 74.595208] [<ffffffff8112a579>] perf_event_release_kernel+0x69/0xa0
[ 74.602460] [<ffffffff816254d5>] ? _cond_resched+0x5/0x40
[ 74.608667] [<ffffffff8112a640>] put_event+0x90/0xc0
[ 74.614373] [<ffffffff8112a740>] perf_release+0x10/0x20
[ 74.620367] [<ffffffff811a3044>] __fput+0xf4/0x280
[ 74.625894] [<ffffffff811a31de>] ____fput+0xe/0x10
[ 74.631387] [<ffffffff81083697>] task_work_run+0xa7/0xe0
[ 74.637452] [<ffffffff81014981>] do_notify_resume+0x71/0xb0
[ 74.643843] [<ffffffff8162fa92>] int_signal+0x12/0x17
To fix this a new ftrace_ops flag is added that denotes the ftrace_list_end
ftrace_ops stub as just that, a stub. This flag is now checked in the
control loop and the function is not called if the flag is set.
Thanks to Jovi for not just reporting the bug, but also pointing out
where the bug was in the code.
Link: http://lkml.kernel.org/r/514A8855.7090402@redhat.com
Link: http://lkml.kernel.org/r/1364377499-1900-15-git-send-email-jovi.zhangwei@huawei.com
Tested-by: WANG Chao <chaowang@redhat.com>
Reported-by: WANG Chao <chaowang@redhat.com>
Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If we reenable ftrace via syctl, we currently set ftrace_trace_function
based on the previous simplistic algorithm. This is inconsistent with
what update_ftrace_function does. So better call that helper instead.
Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.com
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit 34600f0e9 "tracing: Fix race with max_tr and changing tracers"
fixed the updating of the main buffers with the race of changing
tracers, but left out the fix to the updating of just a per cpu buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/516243B7.9020405@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For NUL terminated string we always need to set '\0' at the end.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: rostedt@goodmis.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/51624254.30301@asianux.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Exported so it can be used by bcache's tracepoints
Signed-off-by: Kent Overstreet <koverstreet@google.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
Update the README file in debugfs/tracing to something more useful.
What's currently in the file is very old and what it shows doesn't
have much use. Heck, it tells you how to mount debugfs! But to read
this file you would have already needed to mount it.
Replace the file with current up-to-date information. It's rather
limited, but what do you expect from a pseudo README file.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_dump() had a lot of issues. What ftrace_dump() does, is when
ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it
will dump out the ftrace buffers to the console when either a oops,
panic, or a sysrq-z occurs.
This was written a long time ago when ftrace was fragile to recursion.
But it wasn't written well even for that.
There's a possible deadlock that can occur if a ftrace_dump() is happening
and an NMI triggers another dump. This is because it grabs a lock
before checking if the dump ran.
It also totally disables ftrace, and tracing for no good reasons.
As the ring_buffer now checks if it is read via a oops or NMI, where
there's a chance that the buffer gets corrupted, it will disable
itself. No need to have ftrace_dump() do the same.
ftrace_dump() is now cleaned up where it uses an atomic counter to
make sure only one dump happens at a time. A simple atomic_inc_return()
is enough that is needed for both other CPUs and NMIs. No need for
a spinlock, as if one CPU is running the dump, no other CPU needs
to do it too.
The tracing_on variable is turned off and not turned on. The original
code did this, but it wasn't pretty. By just disabling this variable
we get the result of not seeing traces that happen between crashes.
For sysrq-z, it doesn't get turned on, but the user can always write
a '1' to the tracing_on file. If they are using sysrq-z, then they should
know about tracing_on.
The new code is much easier to read and less error prone. No more
deadlock possibility when an NMI triggers here.
Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_event_mutex is an rw semaphore now, not a mutex, change the name.
Link: http://lkml.kernel.org/r/513D843B.40109@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ Forward ported to my new code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ppc64 has its own syscall prefix like ".SyS" or ".sys". Make the
comment in arch_syscall_match_sym_name() more understandable.
Link: http://lkml.kernel.org/r/513D842F.40205@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_destroy_fields() is not used outside of the file. It can be
a static function.
Link: http://lkml.kernel.org/r/513D842A.2000907@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
By moving find_event_field() and trace_find_field() into trace_events.c,
the ftrace_common_fields list and trace_get_fields() can become local to
the trace_events.c file.
find_event_field() is renamed to trace_find_event_field() to conform to
the tracing global function names.
Link: http://lkml.kernel.org/r/513D8426.9070109@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
[ rostedt: Modified trace_find_field() to trace_find_event_field() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
TRACE_MAX_PRINT macro is defined, but is not used.
Link: http://lkml.kernel.org/r/513D8421.4070404@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use pr_warn_once, instead of making an open coded implementation.
Link: http://lkml.kernel.org/r/513D8419.20400@huawei.com
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When testing my large changes to the ftrace system, there was
a bug that looked like the ring buffer was dropping events.
I wrote up a quick integrity checker of the ring buffer to
see if it was.
Although the bug ended up being something stupid I did in ftrace,
and had nothing to do with the ring buffer, I figured if I spent
the time to write up this test, I might as well include it in the
kernel.
I cleaned it up a bit, as the original version was rather ugly.
Not saying this version is pretty, but it's a beauty queen
compared to what I original wrote.
To enable the start up test, set CONFIG_RING_BUFFER_STARTUP_TEST.
Note, it runs for 10 seconds, so it will slow your boot time
by at least 10 more seconds.
What it does is documented in both the comments and the Kconfig
help.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function trace_clock() calls "local_clock()" which is exactly
the same clock that perf uses. I'm not sure why perf doesn't call
trace_clock(), as trace_clock() doesn't have any users.
But now it does. As trace_clock() calls local_clock() like perf does,
I added the trace_clock "perf" option that uses trace_clock().
Now the ftrace buffers can use the same clock as perf uses. This
will be useful when perf starts reading the ftrace buffers, and will
be able to interleave them with the same clock data.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a simple trace clock called "uptime" for those that are
interested in the uptime of the trace. It uses jiffies as that's
the safest method, as other uptime clocks grab seq locks, which could
cause a deadlock if taken from an event or function tracer.
Requested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the only way to stop the latency tracers from doing function
tracing is to fully disable the function tracer from the proc file
system:
echo 0 > /proc/sys/kernel/ftrace_enabled
This is a big hammer approach as it disables function tracing for
all users. This includes kprobes, perf, stack tracer, etc.
Instead, create a function-trace option that the latency tracers can
check to determine if it should enable function tracing or not.
This option can be set or cleared even while the tracer is active
and the tracers will disable or enable function tracing depending
on how the option was set.
Instead of using the proc file, disable latency function tracing with
echo 0 > /debug/tracing/options/function-trace
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the depth reported in the stack tracer stack_trace file
does not match the stack_max_size file. This is because the stack_max_size
includes the overhead of stack tracer itself while the depth does not.
The first time a max is triggered, a calculation is not performed that
figures out the overhead of the stack tracer and subtracts it from
the stack_max_size variable. The overhead is stored and is subtracted
from the reported stack size for comparing for a new max.
Now the stack_max_size corresponds to the reported depth:
# cat stack_max_size
4640
# cat stack_trace
Depth Size Location (48 entries)
----- ---- --------
0) 4640 32 _raw_spin_lock+0x18/0x24
1) 4608 112 ____cache_alloc+0xb7/0x22d
2) 4496 80 kmem_cache_alloc+0x63/0x12f
3) 4416 16 mempool_alloc_slab+0x15/0x17
[...]
While testing against and older gcc on x86 that uses mcount instead
of fentry, I found that pasing in ip + MCOUNT_INSN_SIZE let the
stack trace show one more function deep which was missing before.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When gcc 4.6 on x86 is used, the function tracer will use the new
option -mfentry which does a call to "fentry" at every function
instead of "mcount". The significance of this is that fentry is
called as the first operation of the function instead of the mcount
usage of being called after the stack.
This causes the stack tracer to show some bogus results for the size
of the last function traced, as well as showing "ftrace_call" instead
of the function. This is due to the stack frame not being set up
by the function that is about to be traced.
# cat stack_trace
Depth Size Location (48 entries)
----- ---- --------
0) 4824 216 ftrace_call+0x5/0x2f
1) 4608 112 ____cache_alloc+0xb7/0x22d
2) 4496 80 kmem_cache_alloc+0x63/0x12f
The 216 size for ftrace_call includes both the ftrace_call stack
(which includes the saving of registers it does), as well as the
stack size of the parent.
To fix this, if CC_USING_FENTRY is defined, then the stack_tracer
will reserve the first item in stack_dump_trace[] array when
calling save_stack_trace(), and it will fill it in with the parent ip.
Then the code will look for the parent pointer on the stack and
give the real size of the parent's stack pointer:
# cat stack_trace
Depth Size Location (14 entries)
----- ---- --------
0) 2640 48 update_group_power+0x26/0x187
1) 2592 224 update_sd_lb_stats+0x2a5/0x4ac
2) 2368 160 find_busiest_group+0x31/0x1f1
3) 2208 256 load_balance+0xd9/0x662
I'm Cc'ing stable, although it's not urgent, as it only shows bogus
size for item #0, the rest of the trace is legit. It should still be
corrected in previous stable releases.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Use the stack of stack_trace_call() instead of check_stack() as
the test pointer for max stack size. It makes it a bit cleaner
and a little more accurate.
Adding stable, as a later fix depends on this patch.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Altough the trace_dump_stack() already skips three functions in
the call to stack trace, which gets the stack trace to start
at the caller of the function, the caller may want to skip some
more too (as it may have helper functions).
Add a skip argument to the trace_dump_stack() that lets the caller
skip back tracing functions that it doesn't care about.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add triggers to function tracer that lets an event get enabled or
disabled when a function is called:
format is:
<function>:enable_event:<system>:<event>[:<count>]
<function>:disable_event:<system>:<event>[:<count>]
echo 'schedule:enable_event:sched:sched_switch' > /debug/tracing/set_ftrace_filter
Every time schedule is called, it will enable the sched_switch event.
echo 'schedule:disable_event:sched:sched_switch:2' > /debug/tracing/set_ftrace_filter
The first two times schedule is called while the sched_switch
event is enabled, it will disable it. It will not count for a time
that the event is already disabled (or enabled for enable_event).
[ fixed return without mutex_unlock() - thanks to Dan Carpenter and smatch ]
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to let triggers enable or disable events, we need a 'soft'
method for doing so. For example, if a function probe is added that
lets a user enable or disable events when a function is called, that
change must be done without taking locks or a mutex, and definitely
it can't sleep. But the full enabling of a tracepoint is expensive.
By adding a 'SOFT_DISABLE' flag, and converting the flags to be updated
without the protection of a mutex (using set/clear_bit()), this soft
disable flag can be used to allow critical sections to enable or disable
events from being traced (after the event has been placed into "SOFT_MODE").
Some caveats though: The comm recorder (to map pids with a comm) can not
be soft disabled (yet). If you disable an event with with a "soft"
disable and wait a while before reading the trace, the comm cache may be
replaced and you'll get a bunch of <...> for comms in the trace.
Reading the "enable" file for an event that is disabled will now give
you "0*" where the '*' denotes that the tracepoint is still active but
the event itself is "disabled".
[ fixed _BIT used in & operation : thanks to Dan Carpenter and smatch ]
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The entries to the probe hash must be freed after a synchronize_sched()
after the entry has been removed from the hash.
As the entries are registered with ops that may have their own callbacks,
and these callbacks may sleep, we can not use call_rcu_sched() because
the rcu callbacks registered with that are called from a softirq context.
Instead of using call_rcu_sched(), manually save the entries on a free_list
and at the end of the loop that removes the entries, do a synchronize_sched()
and then go through the free_list, freeing the entries.
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a function probe is created, each function that the probe is
attached to, a "callback" method is called. On release of the probe,
each function entry calls the "free" method.
First, "callback" is a confusing name and does not really match what
it does. Callback sounds like it will be called when the probe
triggers. But that's not the case. This is really an "init" function,
so lets rename it as such.
Secondly, both "init" and "free" do not pass enough information back
to the handlers. Pass back the ops, ip and data for each time the
method is called. We have the information, might as well use it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
echo 'schedule:snapshot:1' > /debug/tracing/set_ftrace_filter
This will cause the scheduler to trigger a snapshot the next time
it's called (you can use any function that's not called by NMI).
Even though it triggers only once, you still need to remove it with:
echo '!schedule:snapshot:0' > /debug/tracing/set_ftrace_filter
The :1 can be left off for the first command:
echo 'schedule:snapshot' > /debug/tracing/set_ftrace_filter
But this will cause all calls to schedule to trigger a snapshot.
This must be removed without the ':0'
echo '!schedule:snapshot' > /debug/tracing/set_ftrace_filter
As adding a "count" is a different operation (internally).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add alloc_snapshot() and free_snapshot() to allocate and free the
snapshot buffer respectively, and use these to remove duplicate
code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the function probe enables all functions and runs a "hash"
against every function call to see if it should call a probe. This
is extremely wasteful.
Note, a probe is something like:
echo schedule:traceoff > /debug/tracing/set_ftrace_filter
When schedule is called, the probe will disable tracing. But currently,
it has a call back for *all* functions, and checks to see if the
called function is the probe that is needed.
The probe function has been created before ftrace was rewritten to
allow for more than one "op" to be registered by the function tracer.
When probes were created, it couldn't limit the functions without also
limiting normal function calls. But now we can, it's about time
to update the probe code.
Todo, have separate ops for different entries. That is, assign
a ftrace_ops per probe, instead of one op for all probes. But
as there's not many probes assigned, this may not be that urgent.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing probes that trigger traceon or traceoff can be
set to unlimited, or given a count of # of times to execute.
By separating these two types of probes, we can then use the dynamic
ftrace function filtering directly, and remove the brute force
"check if this function called is my probe" routines in ftrace.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The only thing ftrace_trace_onoff_unreg() does is to do a strcmp()
against the cmd parameter to determine what op to unregister. But
this compare is also done after the location that this function is
called (and returns). By moving the check for '!' to unregister after
the strcmp(), the callback function itself can just do the unregister
and we can get rid of the helper function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove some duplicate code and replace it with a helper function.
This makes the code a it cleaner.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add EXPORT_SYMBOL_GPL() to let the tracing_snapshot() functions be
called from modules.
Also add a test to see if the snapshot was called from NMI context
and just warn in the tracing buffer if so, and return.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a few places that ftrace uses trace_printk() for internal
use, but this requires context (normal, softirq, irq, NMI) buffers
to keep things lockless. But the trace_puts() does not, as it can
write the string directly into the ring buffer. Make a internal helper
for trace_puts() and have the internal functions use that.
This way the extra context buffers are not used.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_printk() is extremely fast and is very handy as it can be
used in any context (including NMIs!). But it still requires scanning
the fmt string for parsing the args. Even the trace_bprintk() requires
a scan to know what args will be saved, although it doesn't copy the
format string itself.
Several times trace_printk() has no args, and wastes cpu cycles scanning
the fmt string.
Adding trace_puts() allows the developer to use an even faster
tracing method that only saves the pointer to the string in the
ring buffer without doing any format parsing at all. This will
help remove even more of the "Heisenbug" effect, when debugging.
Also fixed up the F_printk()s for the ftrace internal bprint and print events.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The changce to add the trace_buffer struct to have the trace array
have both the main buffer and max buffer broke the branch tracer
because the change did not update that code. As the branch tracer
adds a significant amount of overhead, and must be selected via
a selection (not a allyesconfig) it was missed in testing.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If debugging the kernel, and the developer wants to use
tracing_snapshot() in places where tracing_snapshot_alloc() may
be difficult (or more likely, the developer is lazy and doesn't
want to bother with tracing_snapshot_alloc() at all), then adding
alloc_snapshot
to the kernel command line parameter will tell ftrace to allocate
the snapshot buffer (if configured) when it allocates the main
tracing buffer.
I also noticed that ring_buffer_expanded and tracing_selftest_disabled
had inconsistent use of boolean "true" and "false" with "0" and "1".
I cleaned that up too.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the tracing startup selftest code into its own function and
when not enabled, always have that function succeed.
This makes the register_tracer() function much more readable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring buffer updates when done while the ring buffer is active,
needs to be completed on the CPU that is used for the ring buffer
per_cpu buffer. To accomplish this, schedule_work_on() is used to
schedule work on the given CPU.
Now there's no reason to use schedule_work_on() if the process
doing the update happens to be on the CPU that it is processing.
It has already filled the requirement. Instead, just do the work
and continue.
This is needed for tracing_snapshot_alloc() where it may be called
really early in boot, where the work queues have not been set up yet.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new snapshot feature is quite handy. It's a way for the user
to take advantage of the spare buffer that, until then, only
the latency tracers used to "snapshot" the buffer when it hit
a max latency. Now users can trigger a "snapshot" manually when
some condition is hit in a program. But a snapshot currently can
not be triggered by a condition inside the kernel.
With the addition of tracing_snapshot() and tracing_snapshot_alloc(),
snapshots can now be taking when a condition is hit, and the
developer wants to snapshot the case without stopping the trace.
Note, any snapshot will overwrite the old one, so take care
in how this is done.
These new functions are to be used like tracing_on(), tracing_off()
and trace_printk() are. That is, they should never be called
in the mainline Linux kernel. They are solely for the purpose
of debugging.
The tracing_snapshot() will not allocate a buffer, but it is
safe to be called from any context (except NMIs). But if a
snapshot buffer isn't allocated when it is called, it will write
to the live buffer, complaining about the lack of a snapshot
buffer, and then stop tracing (giving you the "permanent snapshot").
tracing_snapshot_alloc() will allocate the snapshot buffer if
it was not already allocated and then take the snapshot. This routine
*may sleep*, and must be called from context that can sleep.
The allocation is done with GFP_KERNEL and not atomic.
If you need a snapshot in an atomic context, say in early boot,
then it is best to call the tracing_snapshot_alloc() before then,
where it will allocate the buffer, and then you can use the
tracing_snapshot() anywhere you want and still get snapshots.
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a ref count to the trace_array structure and prevent removal
of instances that have open descriptors.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the per_cpu directory to the created tracing instances:
cd /sys/kernel/debug/tracing/instances
mkdir foo
ls foo/per_cpu/cpu0
buffer_size_kb snapshot_raw trace trace_pipe_raw
snapshot stats trace_pipe
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the "snapshot" file to the the multi-buffer instances.
cd /sys/kernel/debug/tracing/instances
mkdir foo
ls foo
buffer_size_kb buffer_total_size_kb events free_buffer set_event
snapshot trace trace_clock trace_marker trace_options trace_pipe
tracing_on
cat foo/snapshot
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a bit of duplicate code in creating the trace buffers for
the normal trace buffer and the max trace buffer among the instances
and the main global_trace. This code can be consolidated and cleaned
up a bit making the code cleaner and more readable as well as less
duplication.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The snapshot buffer belongs to the trace array not the tracer that is
running. The trace array should be the data structure that keeps track
of whether or not the snapshot buffer is allocated, not the tracer
desciptor. Having the trace array keep track of it makes modifications
so much easier.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a 'snapshot_raw' per_cpu file that allows tools to read the raw
binary data of the snapshot buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the preempt or irq latency tracers are enabled, they require
the ring buffer to be able to swap the per cpu sub buffers between
two main buffers. This adds a slight overhead to tracing as the
trace recording needs to perform some checks to synchronize
between recording and swaps that might be happening on other CPUs.
The config RING_BUFFER_ALLOW_SWAP is set when a user of the ring
buffer needs the "swap cpu" feature, otherwise the extra checks
are not implemented and removed from the tracing overhead.
The snapshot feature will swap per CPU if the RING_BUFFER_ALLOW_SWAP
config is set. But that only gets set by things like OPROFILE
and the irqs and preempt latency tracers.
This config is added to let the user decide to include this feature
with the snapshot agnostic from whether or not another user of
the ring buffer sets this config.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the snapshot file into the per_cpu tracing directories to allow
them to be read for an individual cpu. This also allows to clear
an individual cpu from the snapshot buffer.
If the kernel allows it (CONFIG_RING_BUFFER_ALLOW_SWAP is set), then
echoing in '1' into one of the per_cpu snapshot files will do an
individual cpu buffer swap instead of the entire file.
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.
The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.
This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.
The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The snapshot utility is extremely useful, and does not add any more
overhead in memory when another latency tracer is enabled. They use
the snapshot underneath. There's no reason to hide the snapshot file
when a latency tracer has been enabled in the kernel.
If any of the latency tracers (irq, preempt or wakeup) is enabled
then also select the snapshot facility.
Note, snapshot can be enabled without the latency tracers enabled.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we do not know what buffer a module event was enabled in.
On unload, it is safest to clear all buffer instances, not just the
top level buffer.
Todo: Clear only the buffer that the event was used in. The
infrastructure is there to do this, but it makes the code a bit
more complex. Lets get the current code vetted before we add that.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently, when a module with events is unloaded, the trace buffer is
cleared. This is just a safety net in case the module might have some
strange callback when its event is outputted. But there's no reason
to reset the buffer if the module didn't have any of its events traced.
Add a flag to the event "call" structure called WAS_ENABLED and gets set
when the event is ever enabled, and this flag never gets cleared. When a
module gets unloaded, if any of its events have this flag set, then the
trace buffer will get cleared.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The move of blocked readers to the ring buffer left out the
init of the wait queue that is used. Tests missed this due to running
stress tests against the buffers, which didn't allow for any
readers to end up waiting. Running a simple read and wait triggered
a bug.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.
Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.com
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The new multi-buffers added a descriptor that kept track of module
events, and the directories they use, with struct ftace_module_file_ops.
This is used to add a ref count to keep modules from unloading while
their files are being accessed.
As the descriptor is only needed when CONFIG_MODULES is enabled, it
is only declared when the config is enabled. But that struct is
dereferenced in a few areas outside the #ifdef CONFIG_MODULES.
By adding some helper routines and moving code around a little,
events can be compiled again without modules.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the conversion of the data array to per cpu, sparse now complains
about the use of per_cpu_ptr() on the variable. But The variable is
allocated with alloc_percpu() and is fine to use. But since the structure
that contains the data variable does not annotate it as such, sparse
gives out a lot of false warnings.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
These two functions are called during kernel boot only.
Link: http://lkml.kernel.org/r/51258796.7020704@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move duplicate code in event print functions to a helper function.
This shrinks the size of the kernel by ~13K.
text data bss dec hex filename
6596137 1743966 10138672 18478775 119f6b7 vmlinux.o.old
6583002 1743849 10138672 18465523 119c2f3 vmlinux.o.new
Link: http://lkml.kernel.org/r/51258746.2060304@huawei.com
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move the logic to wake up on ring buffer data into the ring buffer
code itself. This simplifies the tracing code a lot and also has the
added benefit that waiters on one of the instance buffers can be woken
only when data is added to that instance instead of data added to
any instance.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the ring buffer is empty, a read to trace_pipe_raw wont block.
The tracing code has the infrastructure to wake up waiting readers,
but the trace_pipe_raw doesn't take advantage of that.
When a read is done to trace_pipe_raw without the O_NONBLOCK flag
set, have the read block until there's data in the requested buffer.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace_pipe_raw never implemented polling and this was casing
issues for several utilities. This is now implemented.
Blocked reads still are on the TODO list.
Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently only the splice NONBLOCK flag is checked to determine if
the splice read should block or not. But the file descriptor NONBLOCK
flag also needs to be checked.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The names used to display the field and type in the event format
files are copied, as well as the system name that is displayed.
All these names are created by constant values passed in.
If one of theses values were to be removed by a module, the module
would also be required to remove any event it created.
By using the strings directly, we can save over 100K of memory.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The event structures used by the trace events are mostly persistent,
but they are also allocated by kmalloc, which is not the best at
allocating space for what is used. By converting these kmallocs
into kmem_cache_allocs, we can save over 50K of space that is
permanently allocated.
After boot we have:
slab name active allocated size
--------- ------ --------- ----
ftrace_event_file 979 1005 56 67 1
ftrace_event_field 2301 2310 48 77 1
The ftrace_event_file has at boot up 979 active objects out of
1005 allocated in the slabs. Each object is 56 bytes. In a normal
kmalloc, that would allocate 64 bytes for each object.
1005 - 979 = 26 objects not used
26 * 56 = 1456 bytes wasted
But if we used kmalloc:
64 - 56 = 8 bytes unused per allocation
8 * 979 = 7832 bytes wasted
7832 - 1456 = 6376 bytes in savings
Doing the same for ftrace_event_field where there's 2301 objects
allocated in a slab that can hold 2310 with 48 bytes each we have:
2310 - 2301 = 9 objects not used
9 * 48 = 432 bytes wasted
A kmalloc would also use 64 bytes per object:
64 - 48 = 16 bytes unused per allocation
16 * 2301 = 36816 bytes wasted!
36816 - 432 = 36384 bytes in savings
This change gives us a total of 42760 bytes in savings. At least
on my machine, but as there's a lot of these persistent objects
for all configurations that use trace points, this is a net win.
Thanks to Ezequiel Garcia for his trace_analyze presentation which
pointed out the wasted space in my code.
Cc: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With the new descriptors used to allow multiple buffers in the
tracing directory added, the kernel command line parameter
trace_events=... no longer works. This is because the top level
(global) trace array now has a list of descriptors associated
with the events and the files in the debugfs directory. But in
early bootup, when the command line is processed and the events
enabled, the trace array list of events has not been set up yet.
Without the list of events in the trace array, the setting of
events to record will fail because it would not match any events.
The solution is to set up the top level array in two stages.
The first is to just add the ftrace file descriptors that just point
to the events. This will allow events to be enabled and start tracing.
The second stage is called after the filesystem is set up, and this
stage will create the debugfs event files and directories associated
with the trace array events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a method to the hijacked dentry descriptor of the
"instances" directory to allow for rmdir to remove an
instance of a multibuffer.
Example:
cd /debug/tracing/instances
mkdir hello
ls
hello/
rmdir hello
ls
Like the mkdir method, the i_mutex is dropped for the instances
directory. The instances directory is created at boot up and can
not be renamed or removed. The trace_types_lock mutex is used to
synchronize adding and removing of instances.
I've run several stress tests with different threads trying to
create and delete directories of the same name, and it has stood
up fine.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the interface ("instances" directory) to add multiple buffers
to ftrace. To create a new instance, simply do a mkdir in the
instances directory:
This will create a directory with the following:
# cd instances
# mkdir foo
# ls foo
buffer_size_kb free_buffer trace_clock trace_pipe
buffer_total_size_kb set_event trace_marker tracing_enabled
events/ trace trace_options tracing_on
Currently only events are able to be set, and there isn't a way
to delete a buffer when one is created (yet).
Note, the i_mutex lock is dropped from the parent "instances"
directory during the mkdir operation. As the "instances" directory
can not be renamed or deleted (created on boot), I do not see
any harm in dropping the lock. The creation of the sub directories
is protected by trace_types_lock mutex, which only lets one
instance get into the code path at a time. If two tasks try to
create or delete directories of the same name, only one will occur
and the other will fail with -EEXIST.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the syscall events record into the global buffer. But if
multiple buffers are in place, then we need to have syscall events
record in the proper buffers.
By adding descriptors to pass to the syscall event functions, the
syscall events can now record into the buffers that have been assigned
to them (one event may be applied to mulitple buffers).
This will allow tracing high volume syscalls along with seldom occurring
syscalls without losing the seldom syscall events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global and max-tr currently use static per_cpu arrays for the CPU data
descriptors. But in order to get new allocated trace_arrays, they need to
be allocated per_cpu arrays. Instead of using the static arrays, switch
the global and max-tr to use allocated data.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).
The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.
Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The global_trace variable in kernel/trace/trace.c has been kept 'static' and
local to that file so that it would not be used too much outside of that
file. This has paid off, even though there were lots of changes to make
the trace_array structure more generic (not depending on global_trace).
Removal of a lot of direct usages of global_trace is needed to be able to
create more trace_arrays such that we can add multiple buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both RING_BUFFER_ALL_CPUS and TRACE_PIPE_ALL_CPU are defined as
-1 and used to say that all the ring buffers are to be modified
or read (instead of just a single cpu, which would be >= 0).
There's no reason to keep TRACE_PIPE_ALL_CPU as it is also started
to be used for more than what it was created for, and now that
the ring buffer code added a generic RING_BUFFER_ALL_CPUS define,
we can clean up the trace code to use that instead and remove
the TRACE_PIPE_ALL_CPU macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).
By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latency tracers require the buffers to be in overwrite mode,
otherwise they get screwed up. Force the buffers to stay in overwrite
mode when latency tracers are enabled.
Added a flag_changed() method to the tracer structure to allow
the tracers to see what flags are being changed, and also be able
to prevent the change from happing.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Changing the overwrite mode for the ring buffer via the trace
option only sets the normal buffer. But the snapshot buffer could
swap with it, and then the snapshot would be in non overwrite mode
and the normal buffer would be in overwrite mode, even though the
option flag states otherwise.
Keep the two buffers overwrite modes in sync.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seems that the tracer flags have never been protected from
synchronous writes. Luckily, admins don't usually modify the
tracing flags via two different tasks. But if scripts were to
be used to modify them, then they could get corrupted.
Move the trace_types_lock that protects against tracers changing
to also protect the flags being set.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because function tracing is very invasive, and can even trace
calls to rcu_read_lock(), RCU access in function tracing is done
with preempt_disable_notrace(). This requires a synchronize_sched()
for updates and not a synchronize_rcu().
Function probes (traceon, traceoff, etc) must be freed after
a synchronize_sched() after its entry has been removed from the
hash. But call_rcu() is used. Fix this by using call_rcu_sched().
Also fix the usage to use hlist_del_rcu() instead of hlist_del().
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Although the swap is wrapped with a spin_lock, the assignment
of the temp buffer used to swap is not within that lock.
It needs to be moved into that lock, otherwise two swaps
happening on two different CPUs, can end up using the wrong
temp buffer to assign in the swap.
Luckily, all current callers of the swap function appear to have
their own locks. But in case something is added that allows two
different callers to call the swap, then there's a chance that
this race can trigger and corrupt the buffers.
New code is coming soon that will allow for this race to trigger.
I've Cc'd stable, so this bug will not show up if someone backports
one of the changes that can trigger this bug.
Cc: stable@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf fixes from Ingo Molnar:
"Misc minor fixes mostly related to tracing"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
s390: Fix a header dependencies related build error
tracing: update documentation of snapshot utility
tracing: Do not return EINVAL in snapshot when not allocated
tracing: Add help of snapshot feature when snapshot is empty
ftrace: Update the kconfig for DYNAMIC_FTRACE
To use the tracing snapshot feature, writing a '1' into the snapshot
file causes the snapshot buffer to be allocated if it has not already
been allocated and dose a 'swap' with the main buffer, so that the
snapshot now contains what was in the main buffer, and the main buffer
now writes to what was the snapshot buffer.
To free the snapshot buffer, a '0' is written into the snapshot file.
To clear the snapshot buffer, any number but a '0' or '1' is written
into the snapshot file. But if the file is not allocated it returns
-EINVAL error code. This is rather pointless. It is better just to
do nothing and return success.
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When cat'ing the snapshot file, instead of showing an empty trace
header like the trace file does, show how to use the snapshot
feature.
Also, this is a good place to show if the snapshot has been allocated
or not. Users may want to "pre allocate" the snapshot to have a fast
"swap" of the current buffer. Otherwise, a swap would be slow and might
fail as it would need to allocate the snapshot buffer, and that might
fail under tight memory constraints.
Here's what it looked like before:
# tracer: nop
#
# entries-in-buffer/entries-written: 0/0 #P:4
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# ||| / delay
# TASK-PID CPU# |||| TIMESTAMP FUNCTION
# | | | |||| | |
Here's what it looks like now:
# tracer: nop
#
#
# * Snapshot is freed *
#
# Snapshot commands:
# echo 0 > snapshot : Clears and frees snapshot buffer
# echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
# Takes a snapshot of the main buffer.
# echo 2 > snapshot : Clears snapshot buffer (but does not allocate)
# (Doesn't have to be '2' works with any number that
# is not a '0' or '1')
Acked-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()
Signed-off-by: James Hogan <james.hogan@imgtec.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=65cR
-----END PGP SIGNATURE-----
Merge tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull new ImgTec Meta architecture from James Hogan:
"This adds core architecture support for Imagination's Meta processor
cores, followed by some later miscellaneous arch/metag cleanups and
fixes which I kept separate to ease review:
- Support for basic Meta 1 (ATP) and Meta 2 (HTP) core architecture
- A few fixes all over, particularly for symbol prefixes
- A few privilege protection fixes
- Several cleanups (setup.c includes, split out a lot of
metag_ksyms.c)
- Fix some missing exports
- Convert hugetlb to use vm_unmapped_area()
- Copy device tree to non-init memory
- Provide dma_get_sgtable()"
* tag 'metag-v3.9-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (61 commits)
metag: Provide dma_get_sgtable()
metag: prom.h: remove declaration of metag_dt_memblock_reserve()
metag: copy devicetree to non-init memory
metag: cleanup metag_ksyms.c includes
metag: move mm/init.c exports out of metag_ksyms.c
metag: move usercopy.c exports out of metag_ksyms.c
metag: move setup.c exports out of metag_ksyms.c
metag: move kick.c exports out of metag_ksyms.c
metag: move traps.c exports out of metag_ksyms.c
metag: move irq enable out of irqflags.h on SMP
genksyms: fix metag symbol prefix on crc symbols
metag: hugetlb: convert to vm_unmapped_area()
metag: export clear_page and copy_page
metag: export metag_code_cache_flush_all
metag: protect more non-MMU memory regions
metag: make TXPRIVEXT bits explicit
metag: kernel/setup.c: sort includes
perf: Enable building perf tools for Meta
metag: add boot time LNKGET/LNKSET check
metag: add __init to metag_cache_probe()
...
Some 32 bit architectures require 64 bit values to be aligned (for
example Meta which has 64 bit read/write instructions). These require 8
byte alignment of event data too, so use
!CONFIG_HAVE_64BIT_ALIGNED_ACCESS instead of !CONFIG_64BIT ||
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to decide alignment, and align
buffer_data_page::data accordingly.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org> (previous version subtly different)
Pull block IO core bits from Jens Axboe:
"Below are the core block IO bits for 3.9. It was delayed a few days
since my workstation kept crashing every 2-8h after pulling it into
current -git, but turns out it is a bug in the new pstate code (divide
by zero, will report separately). In any case, it contains:
- The big cfq/blkcg update from Tejun and and Vivek.
- Additional block and writeback tracepoints from Tejun.
- Improvement of the should sort (based on queues) logic in the plug
flushing.
- _io() variants of the wait_for_completion() interface, using
io_schedule() instead of schedule() to contribute to io wait
properly.
- Various little fixes.
You'll get two trivial merge conflicts, which should be easy enough to
fix up"
Fix up the trivial conflicts due to hlist traversal cleanups (commit
b67bfe0d42ca: "hlist: drop the node parameter from iterators").
* 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits)
block: remove redundant check to bd_openers()
block: use i_size_write() in bd_set_size()
cfq: fix lock imbalance with failed allocations
drivers/block/swim3.c: fix null pointer dereference
block: don't select PERCPU_RWSEM
block: account iowait time when waiting for completion of IO request
sched: add wait_for_completion_io[_timeout]
writeback: add more tracepoints
block: add block_{touch|dirty}_buffer tracepoint
buffer: make touch_buffer() an exported function
block: add @req to bio_{front|back}_merge tracepoints
block: add missing block_bio_complete() tracepoint
block: Remove should_sort judgement when flush blk_plug
block,elevator: use new hashtable implementation
cfq-iosched: add hierarchical cfq_group statistics
cfq-iosched: collect stats from dead cfqgs
cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats()
blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock
block: RCU free request_queue
blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge()
...
I'm not sure why, but the hlist for each entry iterators were conceived
list_for_each_entry(pos, head, member)
The hlist ones were greedy and wanted an extra parameter:
hlist_for_each_entry(tpos, pos, head, member)
Why did they need an extra pos parameter? I'm not quite sure. Not only
they don't really need it, it also prevents the iterator from looking
exactly like the list iterator, which is unfortunate.
Besides the semantic patch, there was some manual work required:
- Fix up the actual hlist iterators in linux/list.h
- Fix up the declaration of other iterators based on the hlist ones.
- A very small amount of places were using the 'node' parameter, this
was modified to use 'obj->member' instead.
- Coccinelle didn't handle the hlist_for_each_entry_safe iterator
properly, so those had to be fixed up manually.
The semantic patch which is mostly the work of Peter Senna Tschudin is here:
@@
iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host;
type T;
expression a,c,d,e;
identifier b;
statement S;
@@
-T b;
<+... when != b
(
hlist_for_each_entry(a,
- b,
c, d) S
|
hlist_for_each_entry_continue(a,
- b,
c) S
|
hlist_for_each_entry_from(a,
- b,
c) S
|
hlist_for_each_entry_rcu(a,
- b,
c, d) S
|
hlist_for_each_entry_rcu_bh(a,
- b,
c, d) S
|
hlist_for_each_entry_continue_rcu_bh(a,
- b,
c) S
|
for_each_busy_worker(a, c,
- b,
d) S
|
ax25_uid_for_each(a,
- b,
c) S
|
ax25_for_each(a,
- b,
c) S
|
inet_bind_bucket_for_each(a,
- b,
c) S
|
sctp_for_each_hentry(a,
- b,
c) S
|
sk_for_each(a,
- b,
c) S
|
sk_for_each_rcu(a,
- b,
c) S
|
sk_for_each_from
-(a, b)
+(a)
S
+ sk_for_each_from(a) S
|
sk_for_each_safe(a,
- b,
c, d) S
|
sk_for_each_bound(a,
- b,
c) S
|
hlist_for_each_entry_safe(a,
- b,
c, d, e) S
|
hlist_for_each_entry_continue_rcu(a,
- b,
c) S
|
nr_neigh_for_each(a,
- b,
c) S
|
nr_neigh_for_each_safe(a,
- b,
c, d) S
|
nr_node_for_each(a,
- b,
c) S
|
nr_node_for_each_safe(a,
- b,
c, d) S
|
- for_each_gfn_sp(a, c, d, b) S
+ for_each_gfn_sp(a, c, d) S
|
- for_each_gfn_indirect_valid_sp(a, c, d, b) S
+ for_each_gfn_indirect_valid_sp(a, c, d) S
|
for_each_host(a,
- b,
c) S
|
for_each_host_safe(a,
- b,
c, d) S
|
for_each_mesh_entry(a,
- b,
c, d) S
)
...+>
[akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c]
[akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c]
[akpm@linux-foundation.org: checkpatch fixes]
[akpm@linux-foundation.org: fix warnings]
[akpm@linux-foudnation.org: redo intrusive kvm changes]
Tested-by: Peter Senna Tschudin <peter.senna@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prompt to enable DYNAMIC_FTRACE (the ability to nop and
enable function tracing at run time) had a confusing statement:
"enable/disable ftrace tracepoints dynamically"
This was written before tracepoints were added to the kernel,
but now that tracepoints have been added, this is very confusing
and has confused people enough to give wrong information during
presentations.
Not only that, I looked at the help text, and it still references
that dreaded daemon that use to wake up once a second to update
the nop locations and brick NICs, that hasn't been around for over
five years.
Time to bring the text up to the current decade.
Cc: stable@vger.kernel.org
Reported-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from
Rafael J. Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng
with contributions from Aaron Lu, Chao Guan, Jesper Juhl, and
Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri
with contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from
Dirk Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King,
Davidlohr Bueso, Joseph Salisbury, Kees Cook, Li Fei,
Nishanth Menon, ShuoX Liu, Srinivas Pandruvada, Tejun Heo,
Thomas Renninger, and Yasuaki Ishimatsu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=wijn
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
- Rework of the ACPI namespace scanning code from Rafael J. Wysocki
with contributions from Bjorn Helgaas, Jiang Liu, Mika Westerberg,
Toshi Kani, and Yinghai Lu.
- ACPI power resources handling and ACPI device PM update from Rafael
J Wysocki.
- ACPICA update to version 20130117 from Bob Moore and Lv Zheng with
contributions from Aaron Lu, Chao Guan, Jesper Juhl, and Tim Gardner.
- Support for Intel Lynxpoint LPSS from Mika Westerberg.
- cpuidle update from Len Brown including Intel Haswell support, C1
state for intel_idle, removal of global pm_idle.
- cpuidle fixes and cleanups from Daniel Lezcano.
- cpufreq fixes and cleanups from Viresh Kumar and Fabio Baltieri with
contributions from Stratos Karafotis and Rickard Andersson.
- Intel P-states driver for Sandy Bridge processors from Dirk
Brandewie.
- cpufreq driver for Marvell Kirkwood SoCs from Andrew Lunn.
- cpufreq fixes related to ordering issues between acpi-cpufreq and
powernow-k8 from Borislav Petkov and Matthew Garrett.
- cpufreq support for Calxeda Highbank processors from Mark Langsdorf
and Rob Herring.
- cpufreq driver for the Freescale i.MX6Q SoC and cpufreq-cpu0 update
from Shawn Guo.
- cpufreq Exynos fixes and cleanups from Jonghwan Choi, Sachin Kamat,
and Inderpal Singh.
- Support for "lightweight suspend" from Zhang Rui.
- Removal of the deprecated power trace API from Paul Gortmaker.
- Assorted updates from Andreas Fleig, Colin Ian King, Davidlohr Bueso,
Joseph Salisbury, Kees Cook, Li Fei, Nishanth Menon, ShuoX Liu,
Srinivas Pandruvada, Tejun Heo, Thomas Renninger, and Yasuaki
Ishimatsu.
* tag 'pm+acpi-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (267 commits)
PM idle: remove global declaration of pm_idle
unicore32 idle: delete stray pm_idle comment
openrisc idle: delete pm_idle
mn10300 idle: delete pm_idle
microblaze idle: delete pm_idle
m32r idle: delete pm_idle, and other dead idle code
ia64 idle: delete pm_idle
cris idle: delete idle and pm_idle
ARM64 idle: delete pm_idle
ARM idle: delete pm_idle
blackfin idle: delete pm_idle
sparc idle: rename pm_idle to sparc_idle
sh idle: rename global pm_idle to static sh_idle
x86 idle: rename global pm_idle to static x86_idle
APM idle: register apm_cpu_idle via cpuidle
cpufreq / intel_pstate: Add kernel command line option disable intel_pstate.
cpufreq / intel_pstate: Change to disallow module build
tools/power turbostat: display SMI count by default
intel_idle: export both C1 and C1E
ACPI / hotplug: Fix concurrency issues and memory leaks
...
Pull scheduler changes from Ingo Molnar:
"Main changes:
- scheduler side full-dynticks (user-space execution is undisturbed
and receives no timer IRQs) preparation changes that convert the
cputime accounting code to be full-dynticks ready, from Frederic
Weisbecker.
- Initial sched.h split-up changes, by Clark Williams
- select_idle_sibling() performance improvement by Mike Galbraith:
" 1 tbench pair (worst case) in a 10 core + SMT package:
pre 15.22 MB/sec 1 procs
post 252.01 MB/sec 1 procs "
- sched_rr_get_interval() ABI fix/change. We think this detail is not
used by apps (so it's not an ABI in practice), but lets keep it
under observation.
- misc RT scheduling cleanups, optimizations"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched/rt: Add <linux/sched/rt.h> header to <linux/init_task.h>
cputime: Remove irqsave from seqlock readers
sched, powerpc: Fix sched.h split-up build failure
cputime: Restore CPU_ACCOUNTING config defaults for PPC64
sched/rt: Move rt specific bits into new header file
sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice
sched: Move sched.h sysctl bits into separate header
sched: Fix signedness bug in yield_to()
sched: Fix select_idle_sibling() bouncing cow syndrome
sched/rt: Further simplify pick_rt_task()
sched/rt: Do not account zero delta_exec in update_curr_rt()
cputime: Safely read cputime of full dynticks CPUs
kvm: Prepare to add generic guest entry/exit callbacks
cputime: Use accessors to read task cputime stats
cputime: Allow dynamic switch between tick/virtual based cputime accounting
cputime: Generic on-demand virtual cputime accounting
cputime: Move default nsecs_to_cputime() to jiffies based cputime file
cputime: Librarize per nsecs resolution cputime definitions
cputime: Avoid multiplication overflow on utime scaling
context_tracking: Export context state for generic vtime
...
Fix up conflict in kernel/context_tracking.c due to comment additions.
Pull perf changes from Ingo Molnar:
"There are lots of improvements, the biggest changes are:
Main kernel side changes:
- Improve uprobes performance by adding 'pre-filtering' support, by
Oleg Nesterov.
- Make some POWER7 events available in sysfs, equivalent to what was
done on x86, from Sukadev Bhattiprolu.
- tracing updates by Steve Rostedt - mostly misc fixes and smaller
improvements.
- Use perf/event tracing to report PCI Express advanced errors, by
Tony Luck.
- Enable northbridge performance counters on AMD family 15h, by Jacob
Shin.
- This tracing commit:
tracing: Remove the extra 4 bytes of padding in events
changes the ABI. All involved parties (PowerTop in particular)
seem to agree that it's safe to do now with the introduction of
libtraceevent, but the devil is in the details ...
Main tooling side changes:
- Add 'event group view', from Namyung Kim:
To use it, 'perf record' should group events when recording. And
then perf report parses the saved group relation from file header
and prints them together if --group option is provided. You can
use the 'perf evlist' command to see event group information:
$ perf record -e '{ref-cycles,cycles}' noploop 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.385 MB perf.data (~16807 samples) ]
$ perf evlist --group
{ref-cycles,cycles}
With this example, default perf report will show you each event
separately.
You can use --group option to enable event group view:
$ perf report --group
...
# group: {ref-cycles,cycles}
# ========
# Samples: 7K of event 'anon group { ref-cycles, cycles }'
# Event count (approx.): 6876107743
#
# Overhead Command Shared Object Symbol
# ................ ....... ................. ..........................
99.84% 99.76% noploop noploop [.] main
0.07% 0.00% noploop ld-2.15.so [.] strcmp
0.03% 0.00% noploop [kernel.kallsyms] [k] timerqueue_del
0.03% 0.03% noploop [kernel.kallsyms] [k] sched_clock_cpu
0.02% 0.00% noploop [kernel.kallsyms] [k] account_user_time
0.01% 0.00% noploop [kernel.kallsyms] [k] __alloc_pages_nodemask
0.00% 0.00% noploop [kernel.kallsyms] [k] native_write_msr_safe
0.00% 0.11% noploop [kernel.kallsyms] [k] _raw_spin_lock
0.00% 0.06% noploop [kernel.kallsyms] [k] find_get_page
0.00% 0.02% noploop [kernel.kallsyms] [k] rcu_check_callbacks
0.00% 0.02% noploop [kernel.kallsyms] [k] __current_kernel_time
As you can see the Overhead column now contains both of ref-cycles
and cycles and header line shows group information also - 'anon
group { ref-cycles, cycles }'. The output is sorted by period of
group leader first.
- Initial GTK+ annotate browser, from Namhyung Kim.
- Add option for runtime switching perf data file in perf report,
just press 's' and a menu with the valid files found in the current
directory will be presented, from Feng Tang.
- Add support to display whole group data for raw columns, from Jiri
Olsa.
- Add per processor socket count aggregation in perf stat, from
Stephane Eranian.
- Add interval printing in 'perf stat', from Stephane Eranian.
- 'perf test' improvements
- Add support for wildcards in tracepoint system name, from Jiri
Olsa.
- Add anonymous huge page recognition, from Joshua Zhu.
- perf build-id cache now can show DSOs present in a perf.data file
that are not in the cache, to integrate with build-id servers being
put in place by organizations such as Fedora.
- perf top now shares more of the evsel config/creation routines with
'record', paving the way for further integration like 'top'
snapshots, etc.
- perf top now supports DWARF callchains.
- Fix mmap limitations on 32-bit, fix from David Miller.
- 'perf bench numa mem' NUMA performance measurement suite
- ... and lots of fixes, performance improvements, cleanups and other
improvements I failed to list - see the shortlog and git log for
details."
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (270 commits)
perf/x86/amd: Enable northbridge performance counters on AMD family 15h
perf/hwbp: Fix cleanup in case of kzalloc failure
perf tools: Fix build with bison 2.3 and older.
perf tools: Limit unwind support to x86 archs
perf annotate: Make it to be able to skip unannotatable symbols
perf gtk/annotate: Fail early if it can't annotate
perf gtk/annotate: Show source lines with gray color
perf gtk/annotate: Support multiple event annotation
perf ui/gtk: Implement basic GTK2 annotation browser
perf annotate: Fix warning message on a missing vmlinux
perf buildid-cache: Add --update option
uprobes/perf: Avoid uprobe_apply() whenever possible
uprobes/perf: Teach trace_uprobe/perf code to use UPROBE_HANDLER_REMOVE
uprobes/perf: Teach trace_uprobe/perf code to pre-filter
uprobes/perf: Teach trace_uprobe/perf code to track the active perf_event's
uprobes: Introduce uprobe_apply()
perf: Introduce hw_perf_event->tp_target and ->tp_list
uprobes/perf: Always increment trace_uprobe->nhit
uprobes/tracing: Kill uprobe_trace_consumer, embed uprobe_consumer into trace_uprobe
uprobes/tracing: Introduce is_trace_uprobe_enabled()
...
Commit: c1bf08ac "ftrace: Be first to run code modification on modules"
changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.
Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.
Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.
By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.
Cc: stable@vger.kernel.org
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing of ia32 compat system calls has been a bit of a pain as they
use different system call numbers than the 64bit equivalents.
I wrote a simple 'lls' program that lists files. I compiled it as a i686
ELF binary and ran it under a x86_64 box. This is the result:
echo 0 > /debug/tracing/tracing_on
echo 1 > /debug/tracing/events/syscalls/enable
echo 1 > /debug/tracing/tracing_on ; ./lls ; echo 0 > /debug/tracing/tracing_on
grep lls /debug/tracing/trace
[.. skipping calls before TS_COMPAT is set ...]
lls-1127 [005] d... 936.409188: sys_recvfrom(fd: 0, ubuf: 4d560fc4, size: 0, flags: 8048034, addr: 8, addr_len: f7700420)
lls-1127 [005] d... 936.409190: sys_recvfrom -> 0x8a77000
lls-1127 [005] d... 936.409211: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
lls-1127 [005] d... 936.409215: sys_lgetxattr -> 0xf76ff000
lls-1127 [005] d... 936.409223: sys_dup2(oldfd: 4d55ae9b, newfd: 4)
lls-1127 [005] d... 936.409228: sys_dup2 -> 0xfffffffffffffffe
lls-1127 [005] d... 936.409236: sys_newfstat(fd: 4d55b085, statbuf: 80000)
lls-1127 [005] d... 936.409242: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409243: sys_removexattr(pathname: 3, name: ffcd0060)
lls-1127 [005] d... 936.409244: sys_removexattr -> 0x0
lls-1127 [005] d... 936.409245: sys_lgetxattr(pathname: 0, name: 19614, value: 1, size: 2)
lls-1127 [005] d... 936.409248: sys_lgetxattr -> 0xf76e5000
lls-1127 [005] d... 936.409248: sys_newlstat(filename: 3, statbuf: 19614)
lls-1127 [005] d... 936.409249: sys_newlstat -> 0x0
lls-1127 [005] d... 936.409262: sys_newfstat(fd: f76fb588, statbuf: 80000)
lls-1127 [005] d... 936.409279: sys_newfstat -> 0x3
lls-1127 [005] d... 936.409279: sys_close(fd: 3)
lls-1127 [005] d... 936.421550: sys_close -> 0x200
lls-1127 [005] d... 936.421558: sys_removexattr(pathname: 3, name: ffcd00d0)
lls-1127 [005] d... 936.421560: sys_removexattr -> 0x0
lls-1127 [005] d... 936.421569: sys_lgetxattr(pathname: 4d564000, name: 1b1abc, value: 5, size: 802)
lls-1127 [005] d... 936.421574: sys_lgetxattr -> 0x4d564000
lls-1127 [005] d... 936.421575: sys_capget(header: 4d70f000, dataptr: 1000)
lls-1127 [005] d... 936.421580: sys_capget -> 0x0
lls-1127 [005] d... 936.421580: sys_lgetxattr(pathname: 4d710000, name: 3000, value: 3, size: 812)
lls-1127 [005] d... 936.421589: sys_lgetxattr -> 0x4d710000
lls-1127 [005] d... 936.426130: sys_lgetxattr(pathname: 4d713000, name: 2abc, value: 3, size: 32)
lls-1127 [005] d... 936.426141: sys_lgetxattr -> 0x4d713000
lls-1127 [005] d... 936.426145: sys_newlstat(filename: 3, statbuf: f76ff3f0)
lls-1127 [005] d... 936.426146: sys_newlstat -> 0x0
lls-1127 [005] d... 936.431748: sys_lgetxattr(pathname: 0, name: 1000, value: 3, size: 22)
Obviously I'm not calling newfstat with a fd of 4d55b085. The calls are
obviously incorrect, and confusing.
Other efforts have been made to fix this:
https://lkml.org/lkml/2012/3/26/367
But the real solution is to rewrite the syscall internals and come up
with a fixed solution. One that doesn't require all the kluge that the
current solution has.
Thus for now, instead of outputting incorrect data, simply ignore them.
With this patch the changes now have:
#> grep lls /debug/tracing/trace
#>
Compat system calls simply are not traced. If users need compat
syscalls, then they should just use the raw syscall tracepoints.
For an architecture to make their compat syscalls ignored, it must
define ARCH_TRACE_IGNORE_COMPAT_SYSCALLS (done in asm/ftrace.h) and also
define an arch_trace_is_compat_syscall() function that will return true
if the current task should ignore tracing the syscall.
I want to stress that this change does not affect actual syscalls in any
way, shape or form. It is only used within the tracing system and
doesn't interfere with the syscall logic at all. The changes are
consolidated nicely into trace_syscalls.c and asm/ftrace.h.
I had to make one small modification to asm/thread_info.h and that was
to remove the include of asm/ftrace.h. As asm/ftrace.h required the
current_thread_info() it was causing include hell. That include was
added back in 2008 when the function graph tracer was added:
commit caf4b323 "tracing, x86: add low level support for ftrace return tracing"
It does not need to be included there.
Link: http://lkml.kernel.org/r/1360703939.21867.99.camel@gandalf.local.home
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
uprobe_perf_open/close call the costly uprobe_apply() every time,
we can avoid it if:
- "nr_systemwide != 0" is not changed.
- There is another process/thread with the same ->mm.
- copy_proccess() does inherit_event(). dup_mmap() preserves the
inserted breakpoints.
- event->attr.enable_on_exec == T, we can rely on uprobe_mmap()
called by exec/mmap paths.
- tp_target is exiting. Only _close() checks PF_EXITING, I don't
think TRACE_REG_PERF_OPEN can hit the dying task too often.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Change uprobe_trace_func() and uprobe_perf_func() to return "int". Change
uprobe_dispatcher() to return "trace_ret | perf_ret" although this is not
needed, currently TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive.
The only functional change is that uprobe_perf_func() checks the filtering
too and returns UPROBE_HANDLER_REMOVE if nobody wants to trace current.
Testing:
# perf probe -x /lib/libc.so.6 syscall
# perf record -e probe_libc:syscall -i perl -e 'fork; syscall -1 for 1..10; wait'
# perf report --show-total-period
100.00% 10 perl libc-2.8.so [.] syscall
Before this patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 20
A child process doesn't have a counter, but still it hits this breakoint
"copied" by dup_mmap().
After the patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 11
The child process hits this int3 only once and does unapply_uprobe().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Finally implement uprobe_perf_filter() which checks ->nr_systemwide or
->perf_events to figure out whether we need to insert the breakpoint.
uprobe_perf_open/close are changed to do uprobe_apply(true/false) when
the new perf event comes or goes away.
Note that currently this is very suboptimal:
- uprobe_register() called by TRACE_REG_PERF_REGISTER becomes a
heavy nop, consumer->filter() always returns F at this stage.
As it was already discussed we need uprobe_register_only() to
avoid the costly register_for_each_vma() when possible.
- uprobe_apply() is oftenly overkill. Unless "nr_systemwide != 0"
changes we need uprobe_apply_mm(), unapply_uprobe() is almost
what we need.
- uprobe_apply() can be simply avoided sometimes, see the next
changes.
Testing:
# perf probe -x /lib/libc.so.6 syscall
# perl -e 'syscall -1 while 1' &
[1] 530
# perf record -e probe_libc:syscall perl -e 'syscall -1 for 1..10; sleep 1'
# perf report --show-total-period
100.00% 10 perl libc-2.8.so [.] syscall
Before this patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 79291
A huge ->nrhit == 79291 reflects the fact that the background process
530 constantly hits this breakpoint too, even if doesn't contribute to
the output.
After the patch:
# cat /sys/kernel/debug/tracing/uprobe_profile
/lib/libc.so.6 syscall 10
This shows that only the target process was punished by int3.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Introduce "struct trace_uprobe_filter" which records the "active"
perf_event's attached to ftrace_event_call. For the start we simply
use list_head, we can optimize this later if needed. For example, we
do not really need to record an event with ->parent != NULL, we can
rely on parent->child_list. And we can certainly do some optimizations
for the case when 2 events have the same ->tp_target or tp_target->mm.
Change trace_uprobe_register() to process TRACE_REG_PERF_OPEN/CLOSE
and add/del this perf_event to the list.
We can probably avoid any locking, but lets start with the "obvioulsy
correct" trace_uprobe_filter->rwlock which protects everything.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Move tu->nhit++ from uprobe_trace_func() to uprobe_dispatcher().
->nhit counts how many time we hit the breakpoint inserted by this
uprobe, we do not want to loose this info if uprobe was enabled by
sys_perf_event_open().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
trace_uprobe->consumer and "struct uprobe_trace_consumer" add the
unnecessary indirection and complicate the code for no reason.
This patch simply embeds uprobe_consumer into "struct trace_uprobe",
all other changes only fix the compilation errors.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
probe_event_enable/disable() check tu->consumer != NULL to avoid the
wrong uprobe_register/unregister().
We are going to kill this pointer and "struct uprobe_trace_consumer",
so we add the new helper, is_trace_uprobe_enabled(), which can rely
on TP_FLAG_TRACE/TP_FLAG_PROFILE instead.
Note: the current logic doesn't look optimal, it is not clear why
TP_FLAG_TRACE/TP_FLAG_PROFILE are mutually exclusive, we will probably
change this later.
Also kill the unused TP_FLAG_UPROBE.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
probe_event_enable/disable() check tu->inode != NULL at the start.
This is ugly, if igrab() can fail create_trace_uprobe() should not
succeed and "postpone" the failure.
And S_ISREG(inode->i_mode) check added by d24d7dbf is not safe.
Note: alloc_uprobe() should probably check igrab() != NULL as well.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
probe_event_enable() does uprobe_register() and only after that sets
utc->tu and tu->consumer/flags. This can race with uprobe_dispatcher()
which can miss these assignments or see them out of order. Nothing
really bad can happen, but this doesn't look clean/safe.
And this does not allow to use uprobe_consumer->filter() we are going
to add, it is called by uprobe_register() and it needs utc->tu.
Change this code to initialize everything before uprobe_register(), and
reset tu->consumer/flags if it fails. We can't race with event_disable(),
the caller holds event_mutex, and if we could the code would be wrong
anyway.
In fact I think uprobe_trace_consumer should die, it buys nothing but
complicates the code. We can simply add uprobe_consumer into trace_uprobe.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
create_trace_uprobe() does kern_path() to find ->d_inode, but forgets
to do path_put(). We can do this right after igrab().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Change handle_swbp() to set regs->ip = bp_vaddr in advance, this is
what consumer->handler() needs but uprobe_get_swbp_addr() is not
exported.
This also simplifies the code and makes it more consistent across
the supported architectures. handle_swbp() becomes the only caller
of uprobe_get_swbp_addr().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
uprobe_consumer->filter() is pointless in its current form, kill it.
We will add it back, but with the different signature/semantics. Perhaps
we will even re-introduce the callsite in handler_chain(), but not to
just skip uc->handler().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Move rt scheduler definitions out of include/linux/sched.h into
new file include/linux/sched/rt.h
Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20130207094707.7b9f825f@riff.lan
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On early boot up, when the ftrace ring buffer is initialized, the
static variable current_trace is initialized to &nop_trace.
Before this initialization, current_trace is NULL and will never
become NULL again. It is always reassigned to a ftrace tracer.
Several places check if current_trace is NULL before it uses
it, and this check is frivolous, because at the point in time
when the checks are made the only way current_trace could be
NULL is if ftrace failed its allocations at boot up, and the
paths to these locations would probably not be possible.
By initializing current_trace to &nop_trace where it is declared,
current_trace will never be NULL, and we can remove all these
checks of current_trace being NULL which never needed to be
checked in the first place.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ftrace has a snapshot feature available from kernel space and
latency tracers (e.g. irqsoff) are using it. This patch enables
user applictions to take a snapshot via debugfs.
Add "snapshot" debugfs file in "tracing" directory.
snapshot:
This is used to take a snapshot and to read the output of the
snapshot.
# echo 1 > snapshot
This will allocate the spare buffer for snapshot (if it is
not allocated), and take a snapshot.
# cat snapshot
This will show contents of the snapshot.
# echo 0 > snapshot
This will free the snapshot if it is allocated.
Any other positive values will clear the snapshot contents if
the snapshot is allocated, or return EINVAL if it is not allocated.
Link: http://lkml.kernel.org/r/20121226025300.3252.86850.stgit@liselsia
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
[
Fixed irqsoff selftest and also a conflict with a change
that fixes the update_max_tr.
]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the trace buffer read functions use a static variable
"old_tracer" for detecting if the current tracer changes. This
was suitable for a single trace file ("trace"), but to add a
snapshot feature that will use the same function for its file,
a check against a static variable is not sufficient.
To use the output functions for two different files, instead of
storing the current tracer in a static variable, as the trace
iterator descriptor contains a pointer to the original current
tracer's name, that pointer can now be used to check if the
current tracer has changed between different reads of the trace
file.
Link: http://lkml.kernel.org/r/20121226025252.3252.9276.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
For systems with an unstable sched_clock, all cpu_clock() does is enable/
disable local irq during the call to sched_clock_cpu(). And for stable
systems they are same.
trace_clock_global() already disables interrupts, so it can call
sched_clock_cpu() directly.
Link: http://lkml.kernel.org/r/1356576585-28782-2-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a stat about the number of events read from the ring buffer:
# cat /debug/tracing/per_cpu/cpu0/stats
entries: 39869
overrun: 870512
commit overrun: 0
bytes: 1449912
oldest event ts: 6561.368690
now ts: 6565.246426
dropped events: 0
read events: 112 <-- Added
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
While debugging the virtual cputime with the function graph tracer
with a max_depth of 1 (most common use of the max_depth so far),
I found that I was missing kernel execution because of a race condition.
The code for the return side of the function has a slight race:
ftrace_pop_return_trace(&trace, &ret, frame_pointer);
trace.rettime = trace_clock_local();
ftrace_graph_return(&trace);
barrier();
current->curr_ret_stack--;
The ftrace_pop_return_trace() initializes the trace structure for
the callback. The ftrace_graph_return() uses the trace structure
for its own use as that structure is on the stack and is local
to this function. Then the curr_ret_stack is decremented which
is what the trace.depth is set to.
If an interrupt comes in after the ftrace_graph_return() but
before the curr_ret_stack, then the called function will get
a depth of 2. If max_depth is set to 1 this function will be
ignored.
The problem is that the trace has already been called, and the
timestamp for that trace will not reflect the time the function
was about to re-enter userspace. Calls to the interrupt will not
be traced because the max_depth has prevented this.
To solve this issue, the ftrace_graph_return() can safely be
moved after the current->curr_ret_stack has been updated.
This way the timestamp for the return callback will reflect
the actual time.
If an interrupt comes in after the curr_ret_stack update and
ftrace_graph_return(), it will be traced. It may look a little
confusing to see it within the other function, but at least
it will not be lost.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
__this_cpu_inc_return() or __this_cpu_dec generates a single instruction,
which is faster than __get_cpu_var operation.
Link: http://lkml.kernel.org/r/50A9C1BD.1060308@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The text in Documentation said it would be removed in 2.6.41;
the text in the Kconfig said removal in the 3.1 release. Either
way you look at it, we are well past both, so push it off a cliff.
Note that the POWER_CSTATE and the POWER_PSTATE are part of the
legacy tracing API. Remove all tracepoints which use these flags.
As can be seen from context, most already have a trace entry via
trace_cpu_idle anyways.
Also, the cpufreq/cpufreq.c PSTATE one is actually unpaired, as
compared to the CSTATE ones which all have a clear start/stop.
As part of this, the trace_power_frequency also becomes orphaned,
so it too is deleted.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dan's smatch found a compare bug with the result of the
trace_test_and_set_recursion() and comparing to less than
zero. If the function fails, it returns -1, but was saved in
an unsigned int, which will never be less than zero and will
ignore the result of the test if a recursion did happen.
Luckily this is the last of the recursion tests, as the
infrastructure of ftrace would catch recursions before it
got here, except for some few exceptions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring_buffer.c use to require declarations from trace.h, but
these have moved to the generic header files. There's nothing
in trace.h that ring_buffer.c requires.
There's some headers that trace.h included that ring_buffer.c
needs, but it's best that it includes them directly, and not
include trace.h.
Also, some things may use ring_buffer.c without having tracing
configured. This removes the dependency that may come in the
future.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Using context bit recursion checking, we can help increase the
performance of the ring buffer.
Before this patch:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253
(average: 10.3012)
Now we have:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 9.712
Time: 9.824
Time: 9.861
Time: 9.827
Time: 9.962
Time: 9.905
Time: 9.886
Time: 10.088
Time: 9.861
Time: 9.834
(average: 9.876)
a 4% savings!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracer had two different versions of function tracing.
The disabling of irqs version and the preempt disable version.
As function tracing in very intrusive and can cause nasty recursion
issues, it has its own recursion protection. But the old method to
do this was a flat layer. If it detected that a recursion was happening
then it would just return without recording.
This made the preempt version (much faster than the irq disabling one)
not very useful, because if an interrupt were to occur after the
recursion flag was set, the interrupt would not be traced at all,
because every function that was traced would think it recursed on
itself (due to the context it preempted setting the recursive flag).
Now that we have a recursion flag for every context level, we
no longer need to worry about that. We can disable preemption,
set the current context recursion check bit, and go on. If an
interrupt were to come along, it would check its own context bit
and happily continue to trace.
As the preempt version is faster than the irq disable version,
there's no more reason to keep the preempt version around.
And the irq disable version still had an issue with missing
out on tracing NMI code.
Remove the irq disable function tracer version and have the
preempt disable version be the default (and only version).
Before this patch we had from running:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 12.028
Time: 11.945
Time: 11.925
Time: 11.964
Time: 12.002
Time: 11.910
Time: 11.944
Time: 11.929
Time: 11.941
Time: 11.924
(average: 11.9512)
Now we have:
# echo function > /debug/tracing/current_tracer
# for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253
(average: 10.3012)
a 13.8% savings!
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When function tracing occurs, the following steps are made:
If arch does not support a ftrace feature:
call internal function (uses INTERNAL bits) which calls...
If callback is registered to the "global" list, the list
function is called and recursion checks the GLOBAL bits.
then this function calls...
The function callback, which can use the FTRACE bits to
check for recursion.
Now if the arch does not suppport a feature, and it calls
the global list function which calls the ftrace callback
all three of these steps will do a recursion protection.
There's no reason to do one if the previous caller already
did. The recursion that we are protecting against will
go through the same steps again.
To prevent the multiple recursion checks, if a recursion
bit is set that is higher than the MAX bit of the current
check, then we know that the check was made by the previous
caller, and we can skip the current check.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently for recursion checking in the function tracer, ftrace
tests a task_struct bit to determine if the function tracer had
recursed or not. If it has, then it will will return without going
further.
But this leads to races. If an interrupt came in after the bit
was set, the functions being traced would see that bit set and
think that the function tracer recursed on itself, and would return.
Instead add a bit for each context (normal, softirq, irq and nmi).
A check of which context the task is in is made before testing the
associated bit. Now if an interrupt preempts the function tracer
after the previous context has been set, the interrupt functions
can still be traced.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is lots of places that perform:
op = rcu_dereference_raw(ftrace_control_list);
while (op != &ftrace_list_end) {
Add a helper macro to do this, and also optimize for a single
entity. That is, gcc will optimize a loop for either no iterations
or more than one iteration. But usually only a single callback
is registered to the function tracer, thus the optimized case
should be a single pass. to do this we now do:
op = rcu_dereference_raw(list);
do {
[...]
} while (likely(op = rcu_dereference_raw((op)->next)) &&
unlikely((op) != &ftrace_list_end));
An op is always registered (ftrace_list_end when no callbacks is
registered), thus when a single callback is registered, the link
list looks like:
top => callback => ftrace_list_end => NULL.
The likely(op = op->next) still must be performed due to the race
of removing the callback, where the first op assignment could
equal ftrace_list_end. In that case, the op->next would be NULL.
But this is unlikely (only happens in a race condition when
removing the callback).
But it is very likely that the next op would be ftrace_list_end,
unless more than one callback has been registered. This tells
gcc what the most common case is and makes the fast path with
the least amount of branches.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function tracing recursion self test should not crash
the machine if the resursion test fails. If it detects that
the function tracing is recursing when it should not be, then
bail, don't go into an infinite recursive loop.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If one of the function tracers set by the global ops is not recursion
safe, it can still be called directly without the added recursion
supplied by the ftrace infrastructure.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The test that checks function recursion does things differently
if the arch does not support all ftrace features. But that really
doesn't make a difference with how the test runs, and either way
the count variable should be 2 at the end.
Currently the test wrongly fails for archs that don't support all
the ftrace features.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's a race condition between the setting of a new tracer and
the update of the max trace buffers (the swap). When a new tracer
is added, it sets current_trace to nop_trace before disabling
the old tracer. At this moment, if the old tracer uses update_max_tr(),
the update may trigger the warning against !current_trace->use_max-tr,
as nop_trace doesn't have that set.
As update_max_tr() requires that interrupts be disabled, we can
add a check to see if current_trace == nop_trace and bail if it
does. Then when disabling the current_trace, set it to nop_trace
and run synchronize_sched(). This will make sure all calls to
update_max_tr() have completed (it was called with interrupts disabled).
As a clean up, this commit also removes shrinking and recreating
the max_tr buffer if the old and new tracers both have use_max_tr set.
The old way use to always shrink the buffer, and then expand it
for the next tracer. This is a waste of time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As trace_clock is used by other things besides tracing, and it
does not require anything from trace.h, it is best not to include
the header file in trace_clock.c.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Due to a userspace issue with PowerTop v2beta, which hardcoded
the offset of event fields that it was using, it broke when
we removed the Big Kernel Lock counter from the event header.
(commit e6e1e2593 "tracing: Remove lock_depth from event entry")
Because this broke userspace, it was determined that we must
keep those 4 bytes around.
(commit a3a4a5acd "Regression: partial revert "tracing: Remove lock_depth from event entry"")
This unfortunately wastes space in the ring buffer. 4 bytes per
event, where a lot of events are just 24 bytes. That's 16% of the
buffer wasted. A million events will add 4 megs of white space
into the buffer.
It was later noticed that PowerTop v2beta could not work on systems
where the kernel was 64 bit but the userspace was 32 bits.
The reason was because the offsets are different between the
two and the hard coded offset of one would not work with the other.
With PowerTop v2 final, it implemented the same interface that both
perf and trace-cmd use. That is, it reads the format file of
the event to find the offsets of the fields it needs. This fixes
the problem with running powertop on a 32 bit userspace running
on a 64 bit kernel. It also no longer requires the 4 byte padding.
As PowerTop v2 has been out for a while, and is included in all
major distributions, it is time that we can safely remove the
4 bytes of padding. Users of PowerTop v2beta should upgrade to
PowerTop v2 final.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Move SAVE_REGS support flag into Kconfig and rename
it to CONFIG_DYNAMIC_FTRACE_WITH_REGS. This also introduces
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which indicates
the architecture depending part of ftrace has a code
that saves full registers.
On the other hand, CONFIG_DYNAMIC_FTRACE_WITH_REGS indicates
the code is enabled.
Link: http://lkml.kernel.org/r/20120928081516.3560.72534.stgit@ltc138.sdl.hitachi.co.jp
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the file max_graph_depth to the debug tracing directory that lets
the user define the depth of the function graph.
A very useful operation is to set the depth to 1. Then it traces only
the first function that is called when entering the kernel. This can
be used to determine what system operations interrupt a process.
For example, to work on NOHZ processes (single tasks running without
a timer tick), if any interrupt goes off and preempts that task, this
code will show it happening.
# cd /sys/kernel/debug/tracing
# echo 1 > max_graph_depth
# echo function_graph > current_tracer
# cat per_cpu/cpu/<cpu-of-process>/trace
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's now a check in tracing_reset_online_cpus() if the buffer is
allocated or NULL. No need to do a check before calling it with max_tr.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
max_tr->buffer could be NULL in the tracing_reset{_online_cpus}. In this
case, a NULL pointer dereference happens, so we should return immediately
from these functions.
Note, the current code does not call tracing_reset*() with max_tr when
its buffer is NULL, but future code will. This patch is needed to prevent
the future code from crashing.
Link: http://lkml.kernel.org/r/20121219070234.31200.93863.stgit@liselsia
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Some functions in the syscall tracing is used only locally to
the file, but they are labeled global. Convert them to static functions.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Without this patch, we can register a uprobe event for a directory.
Enabling such a uprobe event would anyway fail.
Example:
$ echo 'p /bin:0x4245c0' > /sys/kernel/debug/tracing/uprobe_events
However dirctories cannot be valid targets for uprobe.
Hence verify if the target is a regular file during the probe
registration.
Link: http://lkml.kernel.org/r/20130103004212.690763002@goodmis.org
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[ cleaned up whitespace and removed redundant IS_DIR() check ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
typeof(&buffer) is a pointer to array of 1024 char, or char (*)[1024].
But, typeof(&buffer[0]) is a pointer to char which match the return type of get_trace_buf().
As well-known, the value of &buffer is equal to &buffer[0].
so return this_cpu_ptr(&percpu_buffer->buffer[0]) can avoid type cast.
Link: http://lkml.kernel.org/r/50A1A800.3020102@gmail.com
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The original ring-buffer code had special checks at the start
of rb_advance_iter() and instead of repeating them again at the
end of the function if a certain condition existed, I just did
a recursive call to rb_advance_iter() because the special condition
would cause rb_advance_iter() to return early (after the checks).
But as things have changed, the special checks no longer exist
and the only thing done for the special_condition is to call
rb_inc_iter() and return. Instead of doing a confusing recursive call,
just call rb_inc_iter instead.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If some other kernel subsystem has a module notifier, and adds a kprobe
to a ftrace mcount point (now that kprobes work on ftrace points),
when the ftrace notifier runs it will fail and disable ftrace, as well
as kprobes that are attached to ftrace points.
Here's the error:
WARNING: at kernel/trace/ftrace.c:1618 ftrace_bug+0x239/0x280()
Hardware name: Bochs
Modules linked in: fat(+) stap_56d28a51b3fe546293ca0700b10bcb29__8059(F) nfsv4 auth_rpcgss nfs dns_resolver fscache xt_nat iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack lockd sunrpc ppdev parport_pc parport microcode virtio_net i2c_piix4 drm_kms_helper ttm drm i2c_core [last unloaded: bid_shared]
Pid: 8068, comm: modprobe Tainted: GF 3.7.0-0.rc8.git0.1.fc19.x86_64 #1
Call Trace:
[<ffffffff8105e70f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff81134106>] ? __probe_kernel_read+0x46/0x70
[<ffffffffa0180000>] ? 0xffffffffa017ffff
[<ffffffffa0180000>] ? 0xffffffffa017ffff
[<ffffffff8105e76a>] warn_slowpath_null+0x1a/0x20
[<ffffffff810fd189>] ftrace_bug+0x239/0x280
[<ffffffff810fd626>] ftrace_process_locs+0x376/0x520
[<ffffffff810fefb7>] ftrace_module_notify+0x47/0x50
[<ffffffff8163912d>] notifier_call_chain+0x4d/0x70
[<ffffffff810882f8>] __blocking_notifier_call_chain+0x58/0x80
[<ffffffff81088336>] blocking_notifier_call_chain+0x16/0x20
[<ffffffff810c2a23>] sys_init_module+0x73/0x220
[<ffffffff8163d719>] system_call_fastpath+0x16/0x1b
---[ end trace 9ef46351e53bbf80 ]---
ftrace failed to modify [<ffffffffa0180000>] init_once+0x0/0x20 [fat]
actual: cc:bb:d2:4b:e1
A kprobe was added to the init_once() function in the fat module on load.
But this happened before ftrace could have touched the code. As ftrace
didn't run yet, the kprobe system had no idea it was a ftrace point and
simply added a breakpoint to the code (0xcc in the cc:bb:d2:4b:e1).
Then when ftrace went to modify the location from a call to mcount/fentry
into a nop, it didn't see a call op, but instead it saw the breakpoint op
and not knowing what to do with it, ftrace shut itself down.
The solution is to simply give the ftrace module notifier the max priority.
This should have been done regardless, as the core code ftrace modification
also happens very early on in boot up. This makes the module modification
closer to core modification.
Link: http://lkml.kernel.org/r/20130107140333.593683061@goodmis.org
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 0fb9656d "tracing: Make tracing_enabled be equal to tracing_on"
changes the behaviour of trace_pipe, ie. it makes trace_pipe return if
we've read something and tracing is enabled, and this means that we have
to 'cat trace_pipe' again and again while running tests.
IMO the right way is if tracing is enabled, we always block and wait for
ring buffer, or we may lose what we want since ring buffer's size is limited.
Link: http://lkml.kernel.org/r/1358132051-5410-1-git-send-email-bo.li.liu@oracle.com
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
bio_{front|back}_merge tracepoints report a bio merging into an
existing request but didn't specify which request the bio is being
merged into. Add @req to it. This makes it impossible to share the
event template with block_bio_queue - split it out.
@req isn't used or exported to userland at this point and there is no
userland visible behavior change. Later changes will make use of the
extra parameter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio completion didn't kick block_bio_complete TP. Only dm was
explicitly triggering the TP on IO completion. This makes
block_bio_complete TP useless for tracers which want to know about
bios, and all other bio based drivers skip generating blktrace
completion events.
This patch makes all bio completions via bio_endio() generate
block_bio_complete TP.
* Explicit trace_block_bio_complete() invocation removed from dm and
the trace point is unexported.
* @rq dropped from trace_block_bio_complete(). bios may fly around
w/o queue associated. Verifying and accessing the assocaited queue
belongs to TP probes.
* blktrace now gets both request and bio completions. Make it ignore
bio completions if request completion path is happening.
This makes all bio based drivers generate blktrace completion events
properly and makes the block_bio_complete TP actually useful.
v2: With this change, block_bio_complete TP could be invoked on sg
commands which have bio's with %NULL bi_bdev. Update TP
assignment code to check whether bio->bi_bdev is %NULL before
dereferencing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Original-patch-by: Namhyung Kim <namhyung@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 02404baf1b "tracing: Remove deprecated tracing_enabled file"
removed the tracing_enabled file as it never worked properly and
the tracing_on file should be used instead. But the tracing_on file
didn't call into the tracers start/stop routines like the
tracing_enabled file did. This caused trace-cmd to break when it
enabled the irqsoff tracer.
If you just did "echo irqsoff > current_tracer" then it would work
properly. But the tool trace-cmd disables tracing first by writing
"0" into the tracing_on file. Then it writes "irqsoff" into
current_tracer and then writes "1" into tracing_on. Unfortunately,
the above commit changed the irqsoff tracer to check the tracing_on
status instead of the tracing_enabled status. If it's disabled then
it does not start the tracer internals.
The problem is that writing "1" into tracing_on does not call the
tracers "start" routine like writing "1" into tracing_enabled did.
This makes the irqsoff tracer not start when using the trace-cmd
tool, and is a regression for userspace.
Simple fix is to have the tracing_on file call the tracers start()
method when being enabled (and the stop() method when disabled).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The latest change to allow trace options to be set on the command
line also broke the trace_options file.
The zeroing of the last byte of the option name that is echoed into
the trace_option file was removed with the consolidation of some
of the code. The compare between the option and what was written to
the trace_options file fails because the string holding the data
written doesn't terminate with a null character.
A zero needs to be added to the end of the string copied from
user space.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The rcutorture tests need to be able to trace the time of the
beginning of an RCU read-side critical section, and thus need access
to trace_clock_local(). This commit therefore adds a the needed
EXPORT_SYMBOL_GPL().
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Pull minor tracing updates and fixes from Steven Rostedt:
"It seems that one of my old pull requests have slipped through.
The changes are contained to just the files that I maintain, and are
changes from others that I told I would get into this merge window.
They have already been in linux-next for several weeks, and should be
well tested."
* 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove unnecessary WARN_ONCE's from tracing_buffers_splice_read
tracing: Remove unneeded checks from the stack tracer
tracing: Add a resize function to make one buffer equivalent to another buffer
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial branch from Jiri Kosina:
"Usual stuff -- comment/printk typo fixes, documentation updates, dead
code elimination."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
HOWTO: fix double words typo
x86 mtrr: fix comment typo in mtrr_bp_init
propagate name change to comments in kernel source
doc: Update the name of profiling based on sysfs
treewide: Fix typos in various drivers
treewide: Fix typos in various Kconfig
wireless: mwifiex: Fix typo in wireless/mwifiex driver
messages: i2o: Fix typo in messages/i2o
scripts/kernel-doc: check that non-void fcts describe their return value
Kernel-doc: Convention: Use a "Return" section to describe return values
radeon: Fix typo and copy/paste error in comments
doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
various: Fix spelling of "asynchronous" in comments.
Fix misspellings of "whether" in comments.
eisa: Fix spelling of "asynchronous".
various: Fix spelling of "registered" in comments.
doc: fix quite a few typos within Documentation
target: iscsi: fix comment typos in target/iscsi drivers
treewide: fix typo of "suport" in various comments and Kconfig
treewide: fix typo of "suppport" in various comments
...
Pull perf fixes from Ingo Molnar:
"These are late-v3.7 pending fixes for tracing."
Fix up trivial conflict in kernel/trace/ring_buffer.c: the NULL pointer
fix clashed with the change of type of the 'ret' variable.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ring-buffer: Fix race between integrity check and readers
ring-buffer: Fix NULL pointer if rb_set_head_page() fails
ftrace: Clear bits properly in reset_iter_read()
I've legally changed my name with New York State, the US Social Security
Administration, et al. This patch propagates the name change and change
in initials and login to comments in the kernel source as well.
Signed-off-by: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The function rb_check_pages() was added to make sure the ring buffer's
pages were sane. This check is done when the ring buffer size is modified
as well as when the iterator is released (closing the "trace" file),
as that was considered a non fast path and a good place to do a sanity
check.
The problem is that the check does not have any locks around it.
If one process were to read the trace file, and another were to read
the raw binary file, the check could happen while the reader is reading
the file.
The issues with this is that the check requires to clear the HEAD page
before doing the full check and it restores it afterward. But readers
require the HEAD page to exist before it can read the buffer, otherwise
it gives a nasty warning and disables the buffer.
By adding the reader lock around the check, this keeps the race from
happening.
Cc: stable@vger.kernel.org # 3.6
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function rb_set_head_page() searches the list of ring buffer
pages for a the page that has the HEAD page flag set. If it does
not find it, it will do a WARN_ON(), disable the ring buffer and
return NULL, as this should never happen.
But if this bug happens to happen, not all callers of this function
can handle a NULL pointer being returned from it. That needs to be
fixed.
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
WARN shouldn't be used as a means of communicating failure to a userspace programmer.
Link: http://lkml.kernel.org/r/20120725153908.GA25203@redhat.com
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
It seems that 'ftrace_enabled' flag should not be used inside the tracer
functions. The ftrace core is using this flag for internal purposes, and
the flag wasn't meant to be used in tracers' runtime checks.
stack tracer is the only tracer that abusing the flag. So stop it from
serving as a bad example.
Also, there is a local 'stack_trace_disabled' flag in the stack tracer,
which is never updated; so it can be removed as well.
Link: http://lkml.kernel.org/r/1342637761-9655-1-git-send-email-anton.vorontsov@linaro.org
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Trace buffer size is now per-cpu, so that there are the following two
patterns in resizing of buffers.
(1) resize per-cpu buffers to same given size
(2) resize per-cpu buffers to another trace_array's buffer size
for each CPU (such as preparing the max_tr which is equivalent
to the global_trace's size)
__tracing_resize_ring_buffer() can be used for (1), and had
implemented (2) inside it for resetting the global_trace to the
original size.
(2) was also implemented in another place. So this patch assembles
them in a new function - resize_buffer_duplicate_size().
Link: http://lkml.kernel.org/r/20121017025616.2627.91226.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There is a typo here where '&' is used instead of '|' and it turns the
statement into a noop. The original code is equivalent to:
iter->flags &= ~((1 << 2) & (1 << 4));
Link: http://lkml.kernel.org/r/20120609161027.GD6488@elgon.mountain
Cc: stable@vger.kernel.org # all of them
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Show raw time stamp values for stats per cpu if you choose counter or tsc mode
for trace_clock. Although a unit of tracing time stamp is nsec in local or global mode,
the units in counter and TSC mode are tracing counter and cycles respectively.
Link: http://lkml.kernel.org/r/1352837903-32191-3-git-send-email-dhsharp@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to promote interoperability between userspace tracers and ftrace,
add a trace_clock that reports raw TSC values which will then be recorded
in the ring buffer. Userspace tracers that also record TSCs are then on
exactly the same time base as the kernel and events can be unambiguously
interlaced.
Tested: Enabled a tracepoint and the "tsc" trace_clock and saw very large
timestamp values.
v2:
Move arch-specific bits out of generic code.
v3:
Rename "x86-tsc", cleanups
v7:
Generic arch bits in Kbuild.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1352837903-32191-1-git-send-email-dhsharp@google.com
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add trace_options to the kernel command line parameter to be able to
set options at early boot. For example, to enable stack dumps of
events, add the following:
trace_options=stacktrace
This along with the trace_event option, you can get not only
traces of the events but also the stack dumps with them.
Requested-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Have the ring buffer commit function use the irq_work infrastructure to
wake up any waiters waiting on the ring buffer for new data. The irq_work
was created for such a purpose, where doing the actual wake up at the
time of adding data is too dangerous, as an event or function trace may
be in the midst of the work queue locks and cause deadlocks. The irq_work
will either delay the action to the next timer interrupt, or trigger an IPI
to itself forcing an interrupt to do the work (in a safe location).
With irq_work, all ring buffer commits can safely do wakeups, removing
the need for the ring buffer commit "nowake" variants, which were used
by events and function tracing. All commits can now safely use the
normal commit, and the "nowake" variants can be removed.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file was used as a quick way to stop
tracers, and try to bring down overhead for things like
the latency tracers (irqsoff, wakeup, etc). But it didn't
work that well.
The tracing_on file was created as a really fast way to
stop recording into the ftrace ring buffer and can interact
with the kernel. That is a tracing_off() call in the kernel
can disable recording of events, and then from userspace one
could echo 1 into the tracing_on file to continue it. The
tracing_enabled function did too much to allow for this.
The tracing_on has taken over as a way to start and stop tracing
and the tracing_enabled file should not be used. But because of
its existance, it still confuses people. Over a year ago the
following commit was added:
commit 6752ab4a9c
Author: Steven Rostedt <srostedt@redhat.com>
Date: Tue Feb 8 13:54:06 2011 -0500
tracing: Deprecate tracing_enabled for tracing_on
This commit added a WARN_ON() if the tracing_enabled file's variable
was changed. After this was added, only LatencyTop complained, and
they soon fixed their tool as there was no reason that LatencyTop
should touch this file as it was using the perf ring buffers which
this file does not interact with. But since that time no one else
has complained about this WARN_ON(). Thus it is safe to assume that
this file is no longer needed. Time to get rid of it.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The tracing_enabled file has been deprecated as it never was able
to serve its purpose well. The tracing_on file has taken over.
Instead of having code to keep tracing_enabled, have the tracing_enabled
file just set tracing_on, and remove the tracing_enabled variable.
This allows us to remove the tracing_enabled file. The reason that
the remove is in a different change set and not removed here is
in case we find some lonely userspace tool that requires the file
to exist. Then the removal patch will get reverted, but this one
will not.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function register_tracer() is only used by kernel core code,
that never needs to remove the tracer. As trace_events have become
the main way to add new tracing to the kernel, the need to
unregister a tracer has diminished. Remove the unused function
unregister_tracer(). If a need arises where we need it, then we
can always add it back.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The open function used by available_events is the same as set_event even
though it uses different seq functions. This causes a side effect of
writing into available_events clearing all events, even though
available_events is suppose to be read only.
There's no reason to keep a single function for just the open and have
both use different functions for everything else. It is a little
confusing and causes strange behavior. Just have each have their own
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ring_buffer_oldest_event_ts() should return a value of u64 type, because
ring_buffer_per_cpu->buffer_page->buffer_data_page->time_stamp is u64 type.
Link: http://lkml.kernel.org/r/1349998076-15495-5-git-send-email-dhsharp@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Because the "tsc" clock isn't in nanoseconds, the ring buffer must be
reset when changing clocks so that incomparable timestamps don't end up
in the same trace.
Tested: Confirmed switching clocks resets the trace buffer.
Google-Bug-Id: 6980623
Link: http://lkml.kernel.org/r/1349998076-15495-3-git-send-email-dhsharp@google.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functions defined in include/trace/syscalls.h are not used directly
since struct ftrace_event_class was introduced. Remove them from the
header file and rearrange the ftrace_event_class declarations in
trace_syscalls.c.
Link: http://lkml.kernel.org/r/1339112785-21806-2-git-send-email-vnagarnaik@google.com
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove ftrace_format_syscall() declaration; it is neither defined nor
used. Also update a comment and formatting.
Link: http://lkml.kernel.org/r/1339112785-21806-1-git-send-email-vnagarnaik@google.com
Signed-off-by: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Whenever an event is registered, the comm of tasks are saved at
every task switch instead of saving them at every event. But if
an event isn't executed much, the comm cache will be filled up
by tasks that did not record the event and you lose out on the comms
that did.
Here's an example, if you enable the following events:
echo 1 > /debug/tracing/events/kvm/kvm_cr/enable
echo 1 > /debug/tracing/events/net/net_dev_xmit/enable
Note, there's no kvm running on this machine so the first event will
never be triggered, but because it is enabled, the storing of comms
will continue. If we now disable the network event:
echo 0 > /debug/tracing/events/net/net_dev_xmit/enable
and look at the trace:
cat /debug/tracing/trace
sshd-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
sshd-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
sshd-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
sshd-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
We see that process 2672 which triggered the events has the comm "sshd".
But if we run hackbench for a bit and look again:
cat /debug/tracing/trace
<...>-2672 [001] ..s2 375.731616: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.731617: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.859356: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.859357: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 375.947351: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 375.947352: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 376.035383: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s1 376.035383: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=242 rc=0
<...>-2672 [001] ..s2 377.563806: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s1 377.563807: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6de0 len=226 rc=0
<...>-2672 [001] ..s2 377.563834: net_dev_xmit: dev=eth0 skbaddr=ffff88005cbb6be0 len=114 rc=0
<...>-2672 [001] ..s1 377.563842: net_dev_xmit: dev=br0 skbaddr=ffff88005cbb6be0 len=114 rc=0
The stored "sshd" comm has been flushed out and we get a useless "<...>".
But by only storing comms after a trace event occurred, we can run
hackbench all day and still get the same output.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The functon tracing_sched_wakeup_trace() does an open coded unlock
commit and save stack. This is what the trace_nowake_buffer_unlock_commit()
is for.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If comm recording is not enabled when trace_printk() is used then
you just get this type of output:
[ adding trace_printk("hello! %d", irq); in do_IRQ ]
<...>-2843 [001] d.h. 80.812300: do_IRQ: hello! 14
<...>-2734 [002] d.h2 80.824664: do_IRQ: hello! 14
<...>-2713 [003] d.h. 80.829971: do_IRQ: hello! 14
<...>-2814 [000] d.h. 80.833026: do_IRQ: hello! 14
By enabling the comm recorder when trace_printk is enabled:
hackbench-6715 [001] d.h. 193.233776: do_IRQ: hello! 21
sshd-2659 [001] d.h. 193.665862: do_IRQ: hello! 21
<idle>-0 [001] d.h1 193.665996: do_IRQ: hello! 21
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since tracing is not used by 99% of Linux users, even though tracing
may be configured in, it does not make sense to allocate 1.4 Megs
per CPU for the ring buffers if they are not used. Thus, on boot up
the ring buffers are set to a minimal size until something needs the
and they are expanded.
This works well for events and tracers (function, etc), but for the
asynchronous use of trace_printk() which can write to the ring buffer
at any time, does not expand the buffers.
On boot up a check is made to see if any trace_printk() is used to
see if the trace_printk() temp buffer pages should be allocated. This
same code can be used to expand the buffers as well.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The existing 'overrun' counter is incremented when the ring
buffer wraps around, with overflow on (the default). We wanted
a way to count requests lost from the buffer filling up with
overflow off, too. I decided to add a new counter instead
of retro-fitting the existing one because it seems like a
different statistic to count conceptually, and also because
of how the code was structured.
Link: http://lkml.kernel.org/r/1310765038-26399-1-git-send-email-slavapestov@google.com
Signed-off-by: Slava Pestov <slavapestov@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
print_max and use_max_tr in struct tracer are "int" variables and
used like flags. This is wasteful, so change the type to "bool".
Link: http://lkml.kernel.org/r/20121002082710.9807.86393.stgit@falsita
Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There's times during debugging that it is helpful to see traces of early
boot functions. But the tracers are initialized at device_initcall()
which is quite late during the boot process. Setting the kernel command
line parameter ftrace=function will not show anything until the function
tracer is initialized. This prevents being able to trace functions before
device_initcall().
There's no reason that the tracers need to be initialized so late in the
boot process. Move them up to core_initcall() as they still need to come
after early_initcall() which initializes the tracing buffers.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There don't have any 'r' prefix in uprobe event naming, remove it.
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
With a system where, num_present_cpus < num_possible_cpus, even if all
CPUs are online, non-present CPUs don't have per_cpu buffers allocated.
If per_cpu/<cpu>/buffer_size_kb is modified for such a CPU, it can cause
a panic due to NULL dereference in ring_buffer_resize().
To fix this, resize operation is allowed only if the per-cpu buffer has
been initialized.
Link: http://lkml.kernel.org/r/1349912427-6486-1-git-send-email-vnagarnaik@google.com
Cc: stable@vger.kernel.org # 3.5+
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull virtio changes from Rusty Russell:
"New workflow: same git trees pulled by linux-next get sent straight to
Linus. Git is awkward at shuffling patches compared with quilt or mq,
but that doesn't happen often once things get into my -next branch."
* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
lguest: fix occasional crash in example launcher.
virtio-blk: Disable callback in virtblk_done()
virtio_mmio: Don't attempt to create empty virtqueues
virtio_mmio: fix off by one error allocating queue
drivers/virtio/virtio_pci.c: fix error return code
virtio: don't crash when device is buggy
virtio: remove CONFIG_VIRTIO_RING
virtio: add help to CONFIG_VIRTIO option.
virtio: support reserved vqs
virtio: introduce an API to set affinity for a virtqueue
virtio-ring: move queue_index to vring_virtqueue
virtio_balloon: not EXPERIMENTAL any more.
virtio-balloon: dependency fix
virtio-blk: fix NULL checking in virtblk_alloc_req()
virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
virtio-blk: Add bio-based IO path for virtio-blk
virtio: console: fix error handling in init() function
tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
tools: Add guest trace agent as a user tool
virtio/console: Allocate scatterlist according to the current pipe size
...
and no longer use its debugfs knobs. The change slightly touches
kernel/trace directory, but it got the needed ack from Steven Rostedt:
http://lkml.org/lkml/2012/8/21/688
2. Added maintainers entry;
3. A bunch of fixes, nothing special.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=1HAE
-----END PGP SIGNATURE-----
Merge tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore
Pull pstore changes from Anton Vorontsov:
1) We no longer ad-hoc to the function tracer "high level"
infrastructure and no longer use its debugfs knobs. The change
slightly touches kernel/trace directory, but it got the needed ack
from Steven Rostedt:
http://lkml.org/lkml/2012/8/21/688
2) Added maintainers entry;
3) A bunch of fixes, nothing special.
* tag 'for-v3.7' of git://git.infradead.org/users/cbou/linux-pstore:
pstore: Avoid recursive spinlocks in the oops_in_progress case
pstore/ftrace: Convert to its own enable/disable debugfs knob
pstore/ram: Add missing platform_device_unregister
MAINTAINERS: Add pstore maintainers
pstore/ram: Mark ramoops_pstore_write_buf() as notrace
pstore/ram: Fix printk format warning
pstore/ram: Fix possible NULL dereference
Pull user namespace changes from Eric Biederman:
"This is a mostly modest set of changes to enable basic user namespace
support. This allows the code to code to compile with user namespaces
enabled and removes the assumption there is only the initial user
namespace. Everything is converted except for the most complex of the
filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
nfs, ocfs2 and xfs as those patches need a bit more review.
The strategy is to push kuid_t and kgid_t values are far down into
subsystems and filesystems as reasonable. Leaving the make_kuid and
from_kuid operations to happen at the edge of userspace, as the values
come off the disk, and as the values come in from the network.
Letting compile type incompatible compile errors (present when user
namespaces are enabled) guide me to find the issues.
The most tricky areas have been the places where we had an implicit
union of uid and gid values and were storing them in an unsigned int.
Those places were converted into explicit unions. I made certain to
handle those places with simple trivial patches.
Out of that work I discovered we have generic interfaces for storing
quota by projid. I had never heard of the project identifiers before.
Adding full user namespace support for project identifiers accounts
for most of the code size growth in my git tree.
Ultimately there will be work to relax privlige checks from
"capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
root in a user names to do those things that today we only forbid to
non-root users because it will confuse suid root applications.
While I was pushing kuid_t and kgid_t changes deep into the audit code
I made a few other cleanups. I capitalized on the fact we process
netlink messages in the context of the message sender. I removed
usage of NETLINK_CRED, and started directly using current->tty.
Some of these patches have also made it into maintainer trees, with no
problems from identical code from different trees showing up in
linux-next.
After reading through all of this code I feel like I might be able to
win a game of kernel trivial pursuit."
Fix up some fairly trivial conflicts in netfilter uid/git logging code.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
userns: Convert the ufs filesystem to use kuid/kgid where appropriate
userns: Convert the udf filesystem to use kuid/kgid where appropriate
userns: Convert ubifs to use kuid/kgid
userns: Convert squashfs to use kuid/kgid where appropriate
userns: Convert reiserfs to use kuid and kgid where appropriate
userns: Convert jfs to use kuid/kgid where appropriate
userns: Convert jffs2 to use kuid and kgid where appropriate
userns: Convert hpfs to use kuid and kgid where appropriate
userns: Convert btrfs to use kuid/kgid where appropriate
userns: Convert bfs to use kuid/kgid where appropriate
userns: Convert affs to use kuid/kgid wherwe appropriate
userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
userns: On ia64 deal with current_uid and current_gid being kuid and kgid
userns: On ppc convert current_uid from a kuid before printing.
userns: Convert s390 getting uid and gid system calls to use kuid and kgid
userns: Convert s390 hypfs to use kuid and kgid where appropriate
userns: Convert binder ipc to use kuids
userns: Teach security_path_chown to take kuids and kgids
userns: Add user namespace support to IMA
userns: Convert EVM to deal with kuids and kgids in it's hmac computation
...
Use generic steal operation on pipe buffer to allow stealing
ring buffer's read page from pipe buffer.
Note that this could reduce the performance of splice on the
splice_write side operation without affinity setting.
Since the ring buffer's read pages are allocated on the
tracing-node, but the splice user does not always execute
splice write side operation on the same node. In this case,
the page will be accessed from the another node.
Thus, it is strongly recommended to assign the splicing
thread to corresponding node.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch splits trace event initialization in two stages:
* ftrace enable
* sysfs event entry creation
This allows to capture trace events from an earlier point
by using 'trace_event' kernel parameter and is important
to trace boot-up allocations.
Note that, in order to enable events at core_initcall,
it's necessary to move init_ftrace_syscalls() from
core_initcall to early_initcall.
Link: http://lkml.kernel.org/r/1347461277-25302-1-git-send-email-elezegarcia@gmail.com
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In our application, we have trace markers spread through user-space.
We have markers in GL, X, etc. These are super handy for Chrome's
about:tracing feature (Chrome + system + kernel trace view), but
can be very distracting when you're trying to debug a kernel issue.
I normally, use "grep -v tracing_mark_write" but it would be nice
if I could just temporarily disable markers all together.
Link: http://lkml.kernel.org/r/1347066739-26285-1-git-send-email-msb@chromium.org
CC: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- When tracing capture the kuid.
- When displaying the data to user space convert the kuid into the
user namespace of the process that opened the report file.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Commit 56449f437 "tracing: make the trace clocks available generally",
in April 2009, made trace_clock available unconditionally, since
CONFIG_X86_DS used it too.
Commit faa4602e47 "x86, perf, bts, mm: Delete the never used BTS-ptrace code",
in March 2010, removed CONFIG_X86_DS, and now only CONFIG_RING_BUFFER (split
out from CONFIG_TRACING for general use) has a dependency on trace_clock. So,
only compile in trace_clock with CONFIG_RING_BUFFER or CONFIG_TRACING
enabled.
Link: http://lkml.kernel.org/r/20120903024513.GA19583@leaf
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With this patch we no longer reuse function tracer infrastructure, now
we register our own tracer back-end via a debugfs knob.
It's a bit more code, but that is the only downside. On the bright side we
have:
- Ability to make persistent_ram module removable (when needed, we can
move ftrace_ops struct into a module). Note that persistent_ram is still
not removable for other reasons, but with this patch it's just one
thing less to worry about;
- Pstore part is more isolated from the generic function tracer. We tried
it already by registering our own tracer in available_tracers, but that
way we're loosing ability to see the traces while we record them to
pstore. This solution is somewhere in the middle: we only register
"internal ftracer" back-end, but not the "front-end";
- When there is only pstore tracing enabled, the kernel will only write
to the pstore buffer, omitting function tracer buffer (which, of course,
still can be enabled via 'echo function > current_tracer').
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
The function graph has a test to check if the frame pointer is
corrupted, which can happen with various options of gcc with mcount.
But this is not an issue with -mfentry as -mfentry does not need nor use
frame pointers for function graph tracing.
Link: http://lkml.kernel.org/r/20120807194059.773895870@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Thanks to Andi Kleen, gcc 4.6.0 now supports -mfentry for x86
(and hopefully soon for other archs). What this does is to have
the function profiler start at the beginning of the function
instead of after the stack is set up. As plain -pg (mcount) is
called after the stack is set up, and in some cases can have issues
with the function graph tracer. It also requires frame pointers to
be enabled.
The -mfentry now calls __fentry__ at the beginning of the function.
This allows for compiling without frame pointers and even has the
ability to access parameters if needed.
If the architecture and the compiler both support -mfentry then
use that instead.
Link: http://lkml.kernel.org/r/20120807194059.392617243@goodmis.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
. Fix include order for bison/flex-generated C files, from Ben Hutchings
. Build fixes and documentation corrections from David Ahern
. Group parsing support, from Jiri Olsa
. UI/gtk refactorings and improvements from Namhyung Kim
. NULL deref fix for perf script, from Namhyung Kim
. Assorted cleanups from Robert Richter
. Let O= makes handle relative paths, from Steven Rostedt
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=0a2X
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Fix include order for bison/flex-generated C files, from Ben Hutchings
* Build fixes and documentation corrections from David Ahern
* Group parsing support, from Jiri Olsa
* UI/gtk refactorings and improvements from Namhyung Kim
* NULL deref fix for perf script, from Namhyung Kim
* Assorted cleanups from Robert Richter
* Let O= makes handle relative paths, from Steven Rostedt
* perf script python fixes, from Feng Tang.
* Improve 'perf lock' error message when the needed tracepoints
are not present, from David Ahern.
* Initial bash completion support, from Frederic Weisbecker
* Allow building without libelf, from Namhyung Kim.
* Support DWARF CFI based unwind to have callchains when %bp
based unwinding is not possible, from Jiri Olsa.
* Symbol resolution fixes, while fixing support PPC64 files with an .opt ELF
section was the end goal, several fixes for code that handles all
architectures and cleanups are included, from Cody Schafer.
* Add a description for the JIT interface, from Andi Kleen.
* Assorted fixes for Documentation and build in 32 bit, from Robert Richter
* Add support for non-tracepoint events in perf script python, from Feng Tang
* Cache the libtraceevent event_format associated to each evsel early, so that we
avoid relookups, i.e. calling pevent_find_event repeatedly when processing
tracepoint events.
[ This is to reduce the surface contact with libtraceevents and make clear what
is that the perf tools needs from that lib: so far parsing the common and per
event fields. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
syscall_get_nr can return -1 in the case that the task is not executing
a system call.
This patch fixes perf_syscall_{enter,exit} to check that the syscall
number is valid before using it as an index into a bitmap.
Link: http://lkml.kernel.org/r/1345137254-7377-1-git-send-email-will.deacon@arm.com
Cc: Jason Baron <jbaron@redhat.com>
Cc: Wade Farnsworth <wade_farnsworth@mentor.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add missing initialization for ret variable. Its initialization
is based on the re_cnt variable, which is being set deep down
in the ftrace_function_filter_re function.
I'm not sure compilers would be smart enough to see this in near
future, so killing the warning this way.
Link: http://lkml.kernel.org/r/1340120894-9465-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The warkeup_rt self test used msleep() calls to wait for real time
tasks to wake up and run. On bare-metal hardware, this was enough as
the scheduler should let the RT task run way before the non-RT task
wakes up from the msleep(). If it did not, then that would mean the
scheduler was broken.
But when dealing with virtual machines, this is a different story.
If the RT task wakes up on a VCPU, it's up to the host to decide when
that task gets to schedule, which can be far behind the time that the
non-RT task wakes up. In this case, the test would fail incorrectly.
As we are not testing the scheduler, but instead the wake up tracing,
we can use completions to wait and not depend on scheduler timings
to see if events happen on time.
Link: http://lkml.kernel.org/r/1343663105.3847.7.camel@fedora
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull perf fixes from Ingo Molnar:
"Fix merge window fallout and fix sleep profiling (this was always
broken, so it's not a fix for the merge window - we can skip this one
from the head of the tree)."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/trace: Add ability to set a target task for events
perf/x86: Fix USER/KERNEL tagging of samples properly
perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bit
A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.
Now a target task can be set by using __perf_task().
The original idea and a draft patch belongs to Peter Zijlstra.
I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a new filter update interface ftrace_set_filter_ip()
to set ftrace filter by ip address, not only glob pattern.
Link: http://lkml.kernel.org/r/20120605102808.27845.67952.stgit@localhost.localdomain
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add selftests to test the save-regs functionality of ftrace.
If the arch supports saving regs, then it will make sure that regs is
at least not NULL in the callback.
If the arch does not support saving regs, it makes sure that the
registering of the ftrace_ops that requests saving regs fails.
It then tests the registering of the ftrace_ops succeeds if the
'IF_SUPPORTED' flag is set. Then it makes sure that the regs passed to
the function is NULL.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add selftests to test the function tracing recursion protection actually
does work. It also tests if a ftrace_ops states it will perform its own
protection. Although, even if the ftrace_ops states it will protect itself,
the ftrace infrastructure may still provide protection if the arch does
not support all features or another ftrace_ops is registered.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As more users of the function tracer utility are being added, they do
not always add the necessary recursion protection. To protect from
function recursion due to tracing, if the callback ftrace_ops does not
specifically specify that it protects against recursion (by setting
the FTRACE_OPS_FL_RECURSION_SAFE flag), the list operation will be
called by the mcount trampoline which adds recursion protection.
If the flag is set, then the function will be called directly with no
extra protection.
Note, the list operation is called if more than one function callback
is registered, or if the arch does not support all of the function
tracer features.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Here's the big staging tree merge for the 3.6-rc1 merge window.
There are some patches in here outside of drivers/staging/, notibly the iio
code (which is still stradeling the staging / not staging boundry), the pstore
code, and the tracing code. All of these have gotten ackes from the various
subsystem maintainers to be included in this tree. The pstore and tracing
patches are related, and are coming here as they replace one of the android
staging drivers.
Otherwise, the normal staging mess. Lots of cleanups and a few new drivers
(some iio drivers, and the large csr wireless driver abomination.)
Note, you will get a merge issue with the following files:
drivers/staging/comedi/drivers/s626.h
drivers/staging/gdm72xx/netlink_k.c
both of which should be trivial for you to handle.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)
iEYEABECAAYFAlAQiD8ACgkQMUfUDdst+ykxhgCeMUjvc+1RTtSprzvkzpejgoUU
6A4AnAleWMnkaCD8vruGnRdGl/Qtz51+
=mN6M
-----END PGP SIGNATURE-----
Merge tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree patches from Greg Kroah-Hartman:
"Here's the big staging tree merge for the 3.6-rc1 merge window.
There are some patches in here outside of drivers/staging/, notibly
the iio code (which is still stradeling the staging / not staging
boundry), the pstore code, and the tracing code. All of these have
gotten acks from the various subsystem maintainers to be included in
this tree. The pstore and tracing patches are related, and are coming
here as they replace one of the android staging drivers.
Otherwise, the normal staging mess. Lots of cleanups and a few new
drivers (some iio drivers, and the large csr wireless driver
abomination.)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
Fixed up trivial conflicts in drivers/staging/comedi/drivers/s626.h and
drivers/staging/gdm72xx/netlink_k.c
* tag 'staging-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1108 commits)
staging: csr: delete a bunch of unused library functions
staging: csr: remove csr_utf16.c
staging: csr: remove csr_pmem.h
staging: csr: remove CsrPmemAlloc
staging: csr: remove CsrPmemFree()
staging: csr: remove CsrMemAllocDma()
staging: csr: remove CsrMemCalloc()
staging: csr: remove CsrMemAlloc()
staging: csr: remove CsrMemFree() and CsrMemFreeDma()
staging: csr: remove csr_util.h
staging: csr: remove CsrOffSetOf()
stating: csr: remove unneeded #includes in csr_util.c
staging: csr: make CsrUInt16ToHex static
staging: csr: remove CsrMemCpy()
staging: csr: remove CsrStrLen()
staging: csr: remove CsrVsnprintf()
staging: csr: remove CsrStrDup
staging: csr: remove CsrStrChr()
staging: csr: remove CsrStrNCmp
staging: csr: remove CsrStrCmp
...
Add a way to have different functions calling different trampolines.
If a ftrace_ops wants regs saved on the return, then have only the
functions with ops registered to save regs. Functions registered by
other ops would not be affected, unless the functions overlap.
If one ftrace_ops registered functions A, B and C and another ops
registered fucntions to save regs on A, and D, then only functions
A and D would be saving regs. Function B and C would work as normal.
Although A is registered by both ops: normal and saves regs; this is fine
as saving the regs is needed to satisfy one of the ops that calls it
but the regs are ignored by the other ops function.
x86_64 implements the full regs saving, and i386 just passes a NULL
for regs to satisfy the ftrace_ops passing. Where an arch must supply
both regs and ftrace_ops parameters, even if regs is just NULL.
It is OK for an arch to pass NULL regs. All function trace users that
require regs passing must add the flag FTRACE_OPS_FL_SAVE_REGS when
registering the ftrace_ops. If the arch does not support saving regs
then the ftrace_ops will fail to register. The flag
FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED may be set that will prevent the
ftrace_ops from failing to register. In this case, the handler may
either check if regs is not NULL or check if ARCH_SUPPORTS_FTRACE_SAVE_REGS.
If the arch supports passing regs it will set this macro and pass regs
for ops that request them. All other archs will just pass NULL.
Link: Link: http://lkml.kernel.org/r/20120711195745.107705970@goodmis.org
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Return as the 4th paramater to the function tracer callback the pt_regs.
Later patches that implement regs passing for the architectures will require
having the ftrace_ops set the SAVE_REGS flag, which will tell the arch
to take the time to pass a full set of pt_regs to the ftrace_ops callback
function. If the arch does not support it then it should pass NULL.
If an arch can pass full regs, then it should define:
ARCH_SUPPORTS_FTRACE_SAVE_REGS to 1
Link: http://lkml.kernel.org/r/20120702201821.019966811@goodmis.org
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt (Red Hat)