Commit Graph

9 Commits

Author SHA1 Message Date
Sakari Ailus debc313a18 media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
There appears to be an issue in using \small in certain cases on Sphinx
1.4 and 1.5. Other format documents don't use \small either, remove it
from here as well.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

[mchehab@s-opensource.com: kept tabularcolumns - readjusted - and
 add a few blank lines for it to display better]
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-09-05 06:32:54 -04:00
Mauro Carvalho Chehab 70b074df4e media: fix pdf build with Spinx 1.6
Sphinx 1.6 generates some LaTeX code before each table,
starting its own environment before calling tabulary,
apparently to improve table layout.

The problem is that such environment is incompatible with
adjustbox. While, in thesis, it should be possible to override
it or to redefine tabulary, I was unable to produce such patch.

Also, that would likely break on some future Sphinx version.

So, instead, let's just change the font size on bigger tables,
in order for them to fit into the page size. That is not as
good as adjustbox, and require some manual work, but it should
be less sensitive to Sphinx changes.

While here, adjust a few other tables whose text is exceeding
the cell boundaries.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26 20:13:22 -04:00
Sakari Ailus 5bbced125a [media] doc-rst: Specify raw bayer format variant used in the examples
The documentation simply mentioned that one of the four pixel orders was
used in the example. Now specify the exact pixelformat instead.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-11-23 20:05:25 -02:00
Laurent Pinchart c2b66cafdf [media] v4l: doc: Remove row numbers from tables
Shorten the tables by removing row numbers in comments, allowing for
later insertion of rows with minimal diffs.

All changes have been generated by the following script.

import io
import re
import sys

def process_table(fname, data):
	if fname.endswith('hist-v4l2.rst'):
		data = re.sub(u'\n{1,2}\t( ?)  -( ?) ?', u'\n\t\\1 -\\2', data, flags = re.MULTILINE)
		data = re.sub(u'\n(\t|       )-  \.\. row [0-9]+\n\t  ?-( ?) ?', u'\\1* -\\2', data, flags = re.MULTILINE)
	else:
		data = re.sub(u'\n{1,2}       -( ?) ?', u'\n      -\\1', data, flags = re.MULTILINE)
		data = re.sub(u'(\n?)(\n\n    -  \.\. row 1\n)', u'\n\\2', data, flags = re.MULTILINE)
		data = re.sub(u'\n    -  \.\. row [0-9]+\n      -( ?) ?', u'    * -\\1', data, flags = re.MULTILINE)
		data = re.sub(u'\n    -  \.\. row [0-9]+\n       \.\. (_[A-Z0-9_`-]*:)', u'\n    -  .. \\1', data, flags = re.MULTILINE)
		data = re.sub(u'\n    -  \.\. (_[A-Z0-9_`-]*:)\n      -', u'    * .. \\1\n\n      -', data, flags = re.MULTILINE)
		data = re.sub(u'^       - ', u'      -', data, flags = re.MULTILINE)
		data = re.sub(u'^(\t{1,2})  ', u'\\1', data, flags = re.MULTILINE)

	return data

def process_file(fname, data):
	buf = io.StringIO(data)
	output = ''
	in_table = False
	table_separator = 0

	for line in buf.readlines():
		if line.find('.. flat-table::') != -1:
			in_table = True
			table = ''
		elif in_table and not re.match('^[\t\n]|(    )', line):
			in_table = False
			output += process_table(fname, table)

		if in_table:
			table += line
		else:
			output += line

	if in_table:
		in_table = False
		output += process_table(fname, table)

	return output

fname = sys.argv[1]

data = file(fname, 'rb').read().decode('utf-8')
data = process_file(fname, data)
file(fname, 'wb').write(data.encode('utf-8'))

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-09-22 07:03:14 -03:00
Sakari Ailus 88646d37da [media] doc-rst: Clean up raw bayer pixel format definitions
- Explicitly state that the most significant n bits are zeroed on 10 and
  12 bpp formats.
- Remove extra comma from the last entry of the format list
- Add a missing colon before a list
- Use figures versus word numerals consistently

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 11:07:29 -03:00
Sakari Ailus 72e8138c5d [media] doc-rst: Correct the ordering of LSBs of the 10-bit raw packed formats
The 10-bit packed raw bayer format documented that the data of the first
pixel of a four-pixel group was found in the first byte and the two
highest bits of the fifth byte. This was not entirely correct. The two
bits in the fifth byte are the two lowest bits. The second pixel occupies
the second byte and third and fourth least significant bits and so on.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-09 11:04:04 -03:00
Mauro Carvalho Chehab 4810923765 [media] docs-rst: remove width hints from pixfmt byte order tables
Those hints are wrong, and doesn't really improve the look
of those tables. So, keep them only when they're useful.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-22 10:16:18 -03:00
Mauro Carvalho Chehab 5bd4bb7817 [media] docs-rst: add tabularcolumns to all tables
LaTeX doesn't handle too well auto-width on tables, and ReST
markup requires an special tag to give it the needed hints.

As we're using A4 paper, we have 17cm of useful spaces. As
most media tables have widths, let's use it to generate the
needed via the following perl script:

my ($line_size, $table_header, $has_cols) = (17.5, 0, 0);
my $out;
my $header = "";
my @widths = ();
sub round { $_[0] > 0 ? int($_[0] + .5) : -int(-$_[0] + .5) }
while (<>) {
	if (!$table_header) {
		$has_cols = 1 if (m/..\s+tabularcolumns::/);
		if (m/..\s+flat-table::/) {
			$table_header = 1;
			$header = $_;
			next;
		}
		$out .= $_;
		next;
	}
	$header .= $_;
	@widths = split(/ /, $1) if (m/:widths:\s+(.*)/);
	if (m/^\n$/) {
		if (!$has_cols && @widths) {
			my ($tot, $t, $i) = (0, 0, 0);
			foreach my $v(@widths) { $tot += $v; };
			$out .= ".. tabularcolumns:: |";
			for ($i = 0; $i < scalar @widths - 1; $i++) {
				my $v = $widths[$i];
				my $w = round(10 * ($v * $line_size) / $tot) / 10;
				$out .= sprintf "p{%.1fcm}|", $w;
				$t += $w;
			}
			my $w = $line_size - $t;
			$out .= sprintf "p{%.1fcm}|\n\n", $w;
		}
		$out .= $header;
		$table_header = 0;
		$has_cols = 0;
		$header = "";
		@widths = ();
	}
}
print $out;

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-08-22 10:07:12 -03:00
Mauro Carvalho Chehab 60c2820d0f doc_rst: rename the media Sphinx suff to Documentation/media
The name of the subsystem is "media", and not "linux_tv". Also,
as we plan to add other stuff there in the future, let's
rename also the media uAPI book to media_uapi, to make it
clearer.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-07-08 11:59:40 -03:00