According to the PMC Type C Subsystem (TCSS) Mux programming guide rev
0.6, when a device is transitioning to DP Alternate Mode state, if the
HPD_STATE (bit 7) field in the status update command VDO is set to
HPD_HIGH, the HPD_HIGH field in the Alternate Mode request “mode_data”
field (bit 14) should also be set. Ensure the bit is correctly handled
while issuing the Alternate Mode request.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Fixes: 6701adfa96 ("usb: typec: driver for Intel PMC mux control")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200429054432.134178-1-pmalani@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some architectures (e.g. arm64) requests for
IO coherent memory may use non-cachable attributes if
the relevant device isn't cache coherent. If these
pages are then remapped into userspace as cacheable,
they may not be coherent with the non-cacheable mappings.
In particular this happens with libusb, when it attempts
to create zero-copy buffers for use by rtl-sdr
(https://github.com/osmocom/rtl-sdr/). On low end arm
devices with non-coherent USB ports, the application will
be unexpectedly killed, while continuing to work fine on
arm machines with coherent USB controllers.
This bug has been discovered/reported a few times over
the last few years. In the case of rtl-sdr a compile time
option to enable/disable zero copy was implemented to
work around it.
Rather than relaying on application specific workarounds,
dma_mmap_coherent() can be used instead of remap_pfn_range().
The page cache/etc attributes will then be correctly set in
userspace to match the kernel mapping.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200504201348.1183246-1-jeremy.linton@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device property names for the port index number are
"usb2-port-number" and "usb3-port-number", not "usb2-port"
and "usb3-port".
Fixes: 6701adfa96 ("usb: typec: driver for Intel PMC mux control")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200430135657.45169-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The syzbot fuzzer found a race between URB submission to endpoint 0
and device reset. Namely, during the reset we call usb_ep0_reinit()
because the characteristics of ep0 may have changed (if the reset
follows a firmware update, for example). While usb_ep0_reinit() is
running there is a brief period during which the pointers stored in
udev->ep_in[0] and udev->ep_out[0] are set to NULL, and if an URB is
submitted to ep0 during that period, usb_urb_ep_type_check() will
report it as a driver bug. In the absence of those pointers, the
routine thinks that the endpoint doesn't exist. The log message looks
like this:
------------[ cut here ]------------
usb 2-1: BOGUS urb xfer, pipe 2 != type 2
WARNING: CPU: 0 PID: 9241 at drivers/usb/core/urb.c:478
usb_submit_urb+0x1188/0x1460 drivers/usb/core/urb.c:478
Now, although submitting an URB while the device is being reset is a
questionable thing to do, it shouldn't count as a driver bug as severe
as submitting an URB for an endpoint that doesn't exist. Indeed,
endpoint 0 always exists, even while the device is in its unconfigured
state.
To prevent these misleading driver bug reports, this patch updates
usb_disable_endpoint() to avoid clearing the ep_in[] and ep_out[]
pointers when the endpoint being disabled is ep0. There's no danger
of leaving a stale pointer in place, because the usb_host_endpoint
structure being pointed to is stored permanently in udev->ep0; it
doesn't get deallocated until the entire usb_device structure does.
Reported-and-tested-by: syzbot+db339689b2101f6f6071@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2005011558590.903-100000@netrider.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the return value of gasket_get_bar_index function as it can return
a negative one (-EINVAL). If this happens, a negative index is used in
the "gasket_dev->bar_data" array.
Addresses-Coverity-ID: 1438542 ("Negative array index read")
Fixes: 9a69f5087c ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Richard Yeh <rcy@google.com>
Link: https://lore.kernel.org/r/20200501155118.13380-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I lost interest in this driver years ago because I could't keep up with
testing the incoming janitorial patches. So, drop me from CC.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Link: https://lore.kernel.org/r/20200502112648.6942-1-wsa@the-dreams.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In LPAR we will only get an intercept for FC==3 for the PQAP
instruction. Running nested under z/VM can result in other intercepts as
well as ECA_APIE is an effective bit: If one hypervisor layer has
turned this bit off, the end result will be that we will get intercepts for
all function codes. Usually the first one will be a query like PQAP(QCI).
So the WARN_ON_ONCE is not right. Let us simply remove it.
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.3+
Fixes: e5282de931 ("s390: ap: kvm: add PQAP interception for AQIC")
Link: https://lore.kernel.org/kvm/20200505083515.2720-1-borntraeger@de.ibm.com
Reported-by: Qian Cai <cailca@icloud.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Pull HID fixes from Jiri Kosina:
- Wacom driver functional and regression fixes from Jason Gerecke
- race condition fix in usbhid, found by syzbot and fixed by Alan Stern
- a few device-specific quirks and ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dock
HID: mcp2221: add gpiolib dependency
HID: i2c-hid: reset Synaptics SYNA2393 on resume
HID: wacom: Report 2nd-gen Intuos Pro S center button status over BT
HID: usbhid: Fix race between usbhid_close() and usbhid_stop()
Revert "HID: wacom: generic: read the number of expected touches on a per collection basis"
HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY instead
HID: alps: Add AUI1657 device ID
HID: logitech: Add support for Logitech G11 extra keys
HID: multitouch: add eGalaxTouch P80H84 support
HID: wacom: Read HID_DG_CONTACTMAX directly for non-generic devices
Put __cpu_up_stack_pointer and __cpu_up_task_pointer in data section.
Currently, these two variables are put in bss section, there is a
potential risk that secondary harts get the uninitialized value before
main hart finishing the bss clearing. In this case, all secondary
harts would pass the waiting loop and enable the MMU before main hart
set up the page table.
This issue happens on random booting of multiple harts, which means
it will manifest for BBL and OpenSBI v0.6 (or older version). In OpenSBI
v0.7 (or higher version), we have HSM extension so all the secondary harts
are brought-up by Linux kernel in an orderly fashion. This means we don't
need this change for OpenSBI v0.7 (or higher version).
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The Linux note in the vdso allows glibc to check the running kernel
version without having to issue the uname syscall.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The RISC-V N-extension is still in draft state hence remove
N-extension related defines from asm/csr.h.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch adds riscv_isa bitmap which represents Host ISA features
common across all Host CPUs. The riscv_isa is not same as elf_hwcap
because elf_hwcap will only have ISA features relevant for user-space
apps whereas riscv_isa will have ISA features relevant to both kernel
and user-space apps.
One of the use-case for riscv_isa bitmap is in KVM hypervisor where
we will use it to do following operations:
1. Check whether hypervisor extension is available
2. Find ISA features that need to be virtualized (e.g. floating
point support, vector extension, etc.)
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The riscv_cpuid_to_hartid_mask() API should be exported to allow
building KVM RISC-V as loadable module.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
In function nfp_abm_vnic_set_mac, pointer nsp is allocated by nfp_nsp_open.
But when nfp_nsp_has_hwinfo_lookup fail, the pointer is not released,
which can lead to a memory leak bug. Fix this issue by adding
nfp_nsp_close(nsp) in the error path.
Fixes: f6e71efdf9 ("nfp: abm: look up MAC addresses via management FW")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gengming reported a UAF in lec_arp_clear_vccs(),
where we add a vcc socket to an entry in a per-device
list but free the socket without removing it from the
list when vcc->dev is NULL.
We need to call lec_vcc_close() to search and remove
those entries contain the vcc being destroyed. This can
be done by calling vcc->push(vcc, NULL) unconditionally
in vcc_destroy_socket().
Another issue discovered by Gengming's reproducer is
the vcc->dev may point to the static device lecatm_dev,
for which we don't need to register/unregister device,
so we can just check for vcc->dev->ops->owner.
Reported-by: Gengming Liu <l.dmxcsnsbh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The multiplication of cfg->ctr[1] by 1000000000 is performed using a
32 bit multiplication (since cfg->ctr[1] is a u32) and this can lead
to a potential overflow. Fix this by making the constant a ULL to
ensure a 64 bit multiply occurs.
Fixes: 504723af0d ("net: stmmac: Add basic EST support for GMAC5+")
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we tell kernel to dump filters from root (ffff:ffff),
those filters on ingress (ffff:0000) are matched, but their
true parents must be dumped as they are. However, kernel
dumps just whatever we tell it, that is either ffff:ffff
or ffff:0000:
$ nl-cls-list --dev=dummy0 --parent=root
cls basic dev dummy0 id none parent root prio 49152 protocol ip match-all
cls basic dev dummy0 id :1 parent root prio 49152 protocol ip match-all
$ nl-cls-list --dev=dummy0 --parent=ffff:
cls basic dev dummy0 id none parent ffff: prio 49152 protocol ip match-all
cls basic dev dummy0 id :1 parent ffff: prio 49152 protocol ip match-all
This is confusing and misleading, more importantly this is
a regression since 4.15, so the old behavior must be restored.
And, when tc filters are installed on a tc class, the parent
should be the classid, rather than the qdisc handle. Commit
edf6711c98 ("net: sched: remove classid and q fields from tcf_proto")
removed the classid we save for filters, we can just restore
this classid in tcf_block.
Steps to reproduce this:
ip li set dev dummy0 up
tc qd add dev dummy0 ingress
tc filter add dev dummy0 parent ffff: protocol arp basic action pass
tc filter show dev dummy0 root
Before this patch:
filter protocol arp pref 49152 basic
filter protocol arp pref 49152 basic handle 0x1
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
After this patch:
filter parent ffff: protocol arp pref 49152 basic
filter parent ffff: protocol arp pref 49152 basic handle 0x1
action order 1: gact action pass
random type none pass val 0
index 1 ref 1 bind 1
Fixes: a10fa20101 ("net: sched: propagate q and parent from caller down to tcf_fill_node")
Fixes: edf6711c98 ("net: sched: remove classid and q fields from tcf_proto")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-10 warns about functions that return a pointer to a stack
variable. In chcr_write_cpl_set_tcb_ulp(), this does not actually
happen, but it's too hard to see for the compiler:
drivers/crypto/chelsio/chcr_ktls.c: In function 'chcr_write_cpl_set_tcb_ulp.constprop':
drivers/crypto/chelsio/chcr_ktls.c:760:9: error: function may return address of local variable [-Werror=return-local-addr]
760 | return pos;
| ^~~
drivers/crypto/chelsio/chcr_ktls.c:712:5: note: declared here
712 | u8 buf[48] = {0};
| ^~~
Split the middle part of the function out into a helper to make
it easier to understand by both humans and compilers, which avoids
the warning.
Fixes: 5a4b9fe7fe ("cxgb4/chcr: complete record tx handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the introduction of TX coalescing, .ndo_start_xmit now potentially
starts the TX completion timer. So only kill the timer _after_ TX has
been disabled.
Fixes: ee1e52d1e4 ("s390/qeth: add TX IRQ coalescing support for IQD devices")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A couple of bug fixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6vmuYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp9n0H/3jlNn/NTaSpvHJUSfVl6jQRDXvfaDFRCjWO
30ueh+R+k0LnaL33XvWGLmfB0nQjnymYWhZT8MXwIG0iZUVDEMaiF3GV9SP+Ss6L
iDokQT3Xhc+bP3PC/kk/PFkrJFmkJHi6M5j6jSRhbWR/Krxy5+eveNlaD9W3cbY0
tMw61WZ+IyhTmBV6u79A8arjCu8ihTVX7EPCcQ4ZcWWpBmKYtXPoDj22ZsoB4IJK
cYM6XYmbnQ3ZTyL7EbgONgo8UvdkN2LN9L7CkdRVRrzMqWKkbJ3vbjanTtN+uOKA
ZRSuw10dfgzBF3Gl/8kRF2UASXpMQHaR5fiLjC4V2D1A65+F2aU=
=Ow6r
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"A couple of bug fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: vsock: kick send_pkt worker once device is started
virtio-blk: handle block_device_operations callbacks after hot unplug
the related system resources were not released when enetc_hw_alloc()
return error in the enetc_pci_mdio_probe(), add iounmap() for error
handling label "err_hw_alloc" to fix it.
Fixes: 6517798dd3 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hi Linus,
Please, pull the following patch that reverts changes in include/uapi/
These structures can get embedded in other structures in user-space
and cause all sorts of warnings and problems[1]. So, we better don't take
any chances and keep the zero-length arrays in place for now.
[1] https://lore.kernel.org/lkml/20200424121553.GE26002@ziepe.ca/
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=LYc+
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-member-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flex-array reverts from Gustavo Silva:
"This reverts flexible array changes in include/uapi/
These structures can get embedded in other structures in user-space
and cause all sorts of warnings and problems[1]. So, we better don't
take any chances and keep the zero-length arrays in place for now"
[1] https://lore.kernel.org/lkml/20200424121553.GE26002@ziepe.ca/
* tag 'flexible-array-member-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
uapi: revert flexible-array conversions
When ENOSPC is set the idx is still valid and gets set to the global
MLX4_SINK_COUNTER_INDEX. However gcc's static analysis cannot tell that
ENOSPC is impossible from mlx4_cmd_imm() and gives this warning:
drivers/net/ethernet/mellanox/mlx4/main.c:2552:28: warning: 'idx' may be
used uninitialized in this function [-Wmaybe-uninitialized]
2552 | priv->def_counter[port] = idx;
Also, when ENOSPC is returned mlx4_allocate_default_counters should not
fail.
Fixes: 6de5f7f6a1 ("net/mlx4_core: Allocate default counter per port")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink health core conditions the reporter's recovery with the
expiration of the grace period. This is not relevant for the first
recovery. Explicitly demand that the grace period will only apply to
recoveries other than the first.
Fixes: c8e1da0bf9 ("devlink: Add health report functionality")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The paranoidal pointer check in IRQ handler looks very strange - it
really protects us only against bogus drivers which request IRQ line
with null pointer dev_id. However, the code fragment is incorrect
because the dev pointer is used before the actual check which leads
to undefined behavior. Remove the check to avoid confusing people
with incorrect code.
Signed-off-by: Maxim Petrov <mmrmaximuzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an application connects to the TIPC topology server and subscribes
to some services, a new connection is created along with some objects -
'tipc_subscription' to store related data correspondingly...
However, there is one omission in the connection handling that when the
connection or application is orderly shutdown (e.g. via SIGQUIT, etc.),
the connection is not closed in kernel, the 'tipc_subscription' objects
are not freed too.
This results in:
- The maximum number of subscriptions (65535) will be reached soon, new
subscriptions will be rejected;
- TIPC module cannot be removed (unless the objects are somehow forced
to release first);
The commit fixes the issue by closing the connection if the 'recvmsg()'
returns '0' i.e. when the peer is shutdown gracefully. It also includes
the other unexpected cases.
Acked-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff, Ilya, and Dongsheng are doing all of the Ceph maintainance
these days.
[ idryomov: Remove Sage's git tree too, it hasn't been pushed to
in years. ]
Signed-off-by: Sage Weil <sage@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Prior to 1d27732f41 ("net: dsa: setup and teardown ports"), we would
not treat failures to set-up an user port as fatal, but after this
commit we would, which is a regression for some systems where interfaces
may be declared in the Device Tree, but the underlying hardware may not
be present (pluggable daughter cards for instance).
Fixes: 1d27732f41 ("net: dsa: setup and teardown ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the ceph_mdsc_open_export_target_session() return fails, it will
do a "goto retry", but the session mutex has already been unlocked.
Re-lock the mutex in that case to ensure that we don't unlock it
twice.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There are 3 speical error codes: -EAGAIN/-EFBIG/-ESTALE.
After calling try_get_cap_refs, ceph_try_get_caps test for the
-EAGAIN twice. Ensure that it tests for -ESTALE instead.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Eduard reported a problem mounting cephfs on s390 arch. The feature
mask sent by the MDS is little-endian, so we need to convert it
before storing and testing against it.
Cc: stable@vger.kernel.org
Reported-and-Tested-by: Eduard Shishkin <edward6@linux.ibm.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When serial console has been assigned to ttyPS1 (which is serial1 alias)
console index is not updated property and pointing to index -1 (statically
initialized) which ends up in situation where nothing has been printed on
the port.
The commit 18cc7ac8a2 ("Revert "serial: uartps: Register own uart console
and driver structures"") didn't contain this line which was removed by
accident.
Fixes: 18cc7ac8a2 ("Revert "serial: uartps: Register own uart console and driver structures"")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/ed3111533ef5bd342ee5ec504812240b870f0853.1588602446.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These structures can get embedded in other structures in user-space
and cause all sorts of warnings and problems. So, we better don't take
any chances and keep the zero-length arrays in place for now.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Commit f458d039db ("kvm: ioapic: Lazy update IOAPIC EOI") introduces
the following infinite loop:
BUG: stack guard page was hit at 000000008f595917 \
(stack is 00000000bdefe5a4..00000000ae2b06f5)
kernel stack overflow (double-fault): 0000 [#1] SMP NOPTI
RIP: 0010:kvm_set_irq+0x51/0x160 [kvm]
Call Trace:
irqfd_resampler_ack+0x32/0x90 [kvm]
kvm_notify_acked_irq+0x62/0xd0 [kvm]
kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm]
ioapic_set_irq+0x20e/0x240 [kvm]
kvm_ioapic_set_irq+0x5c/0x80 [kvm]
kvm_set_irq+0xbb/0x160 [kvm]
? kvm_hv_set_sint+0x20/0x20 [kvm]
irqfd_resampler_ack+0x32/0x90 [kvm]
kvm_notify_acked_irq+0x62/0xd0 [kvm]
kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm]
ioapic_set_irq+0x20e/0x240 [kvm]
kvm_ioapic_set_irq+0x5c/0x80 [kvm]
kvm_set_irq+0xbb/0x160 [kvm]
? kvm_hv_set_sint+0x20/0x20 [kvm]
....
The re-entrancy happens because the irq state is the OR of
the interrupt state and the resamplefd state. That is, we don't
want to show the state as 0 until we've had a chance to set the
resamplefd. But if the interrupt has _not_ gone low then
ioapic_set_irq is invoked again, causing an infinite loop.
This can only happen for a level-triggered interrupt, otherwise
irqfd_inject would immediately set the KVM_USERSPACE_IRQ_SOURCE_ID high
and then low. Fortunately, in the case of level-triggered interrupts the VMEXIT already happens because
TMR is set. Thus, fix the bug by restricting the lazy invocation
of the ack notifier to edge-triggered interrupts, the only ones that
need it.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reported-by: borisvk@bstnet.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://www.spinics.net/lists/kvm/msg213512.html
Fixes: f458d039db ("kvm: ioapic: Lazy update IOAPIC EOI")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207489
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c
Signed-off-by: Matt Jolly <Kangie@footclan.ninja>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Current logic incorrectly uses the enum ioapic_irq_destination_types
to check the posted interrupt destination types. However, the value was
set using APIC_DM_XXX macros, which are left-shifted by 8 bits.
Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead.
Fixes: (fdcf756213 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes')
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1586239989-58305-1-git-send-email-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Due to a bug-report that was compiler-dependent, I updated one of my
machines to gcc-10. That shows a lot of new warnings. Happily they
seem to be mostly the valid kind, but it's going to cause a round of
churn for getting rid of them..
This is the really low-hanging fruit of removing a couple of zero-sized
arrays in some core code. We have had a round of these patches before,
and we'll have many more coming, and there is nothing special about
these except that they were particularly trivial, and triggered more
warnings than most.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix compilation with Clang
- Correctly initialize GICv4.1 in the absence of a virtual ITS
- Move SP_EL0 save/restore to the guest entry/exit code
- Handle PC wrap around on 32bit guests, and narrow all 32bit
registers on userspace access
-----BEGIN PGP SIGNATURE-----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=455e
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm fixes for Linux 5.7, take #2
- Fix compilation with Clang
- Correctly initialize GICv4.1 in the absence of a virtual ITS
- Move SP_EL0 save/restore to the guest entry/exit code
- Handle PC wrap around on 32bit guests, and narrow all 32bit
registers on userspace access
- Prevent the userspace API from interacting directly with the HW
stage of the virtual GIC
- Fix a couple of vGIC memory leaks
- Tighten the rules around the use of the 32bit PSCI functions
for 64bit guest, as well as the opposite situation (matches the
specification)
-----BEGIN PGP SIGNATURE-----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=fh9d
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm fixes for Linux 5.7, take #1
- Prevent the userspace API from interacting directly with the HW
stage of the virtual GIC
- Fix a couple of vGIC memory leaks
- Tighten the rules around the use of the 32bit PSCI functions
for 64bit guest, as well as the opposite situation (matches the
specification)
The corresponding code was added for VMX in commit 42dbaa5a05
("KVM: x86: Virtualize debug registers, 2008-12-15) but never for AMD.
Fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use BUG() in the impossible-to-hit default case when switching on the
scope of INVEPT to squash a warning with clang 11 due to clang treating
the BUG_ON() as conditional.
>> arch/x86/kvm/vmx/nested.c:5246:3: warning: variable 'roots_to_free'
is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
BUG_ON(1);
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: ce8fe7b77b ("KVM: nVMX: Free only the affected contexts when emulating INVEPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200504153506.28898-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The prepare_to_wait() and finish_wait() calls in io_uring_cancel_files()
are mismatched. Currently I don't see any issues related this bug, just
find it by learning codes.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Older compilers warn about initializers with incorrect curly
braces:
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c: In function 'sun6i_dsi_encoder_enable':
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: missing braces around initializer [-Werror=missing-braces]
union phy_configure_opts opts = { 0 };
^
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c:720:8: error: (near initialization for 'opts.mipi_dphy') [-Werror=missing-braces]
Use the GNU empty initializer extension to avoid this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428215105.3928459-1-arnd@arndb.de
By directly using kfree() in different places we risk missing one if
it is switched to using vfree(), especially if the corresponding
vmalloc() is hidden away within a common abstraction.
Oh wait, that's exactly what happened here.
So let's fix this by creating a common abstraction for the free case
as well.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reported-by: syzbot+0bfda3ade1ee9288a1be@syzkaller.appspotmail.com
Fixes: 9a98e7a80f ("vt: don't use kmalloc() for the unicode screen buffer")
Cc: <stable@vger.kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2005021043110.2671@knanqh.ubzr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 580d952e44 ("tty:
serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") because we
should not be doing a clk_put() if we were not successful in getting a
valid clock reference via clk_get() in the first place.
Fixes: 580d952e44 ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200501013904.1394-1-f.fainelli@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock,
which can be used with various Dell Venue 11 models.
Without this quirk the keyboard/touchpad combo works fine when connected
at boot, but when hotplugged 9 out of 10 times it will not work properly.
Adding the quirk fixes this.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Prashant Malani