This reverts commit 038586c343.
Fix the support of detailed/verbose PMU event description by using the
"Unit": keyword in the json files to address event names refering to the
/sys/devices/cpum_[cs]f devices.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180621080452.61012-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the instruction sample failure has happened, it isn't necessary to
execute to the end of the function cs_etm__flush(). This commit is to
bail out immediately and return the error code.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1529298599-3876-3-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch introduces invalid address macro and uses it to replace dummy
value '0xdeadbeefdeadbeefUL'.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1529298599-3876-2-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We want to allow having mixed events with/without callchains, not
using a global flag to show callchains, but allowing supressing
callchains when they are present.
So invert the logic of the last parameter to hists__fprint() to
that effect.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ohqyisr6qge79qa95ojslptx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the comments in the perf events code use articles incorrectly,
using 'a' for words beginning with a vowel sound, where 'an' should be
used.
Signed-off-by: Tobias Tefke <tobias.tefke@tutanota.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/20180709105715.22938-1-tobias.tefke@tutanota.com
[ Fix a few more perf related 'a event' typo fixes from all around the kernel and tooling tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf tool fixes from Ingo Molnar:
"Misc tooling fixes: python3 related fixes, gcc8 fix, bashism fixes and
some other smaller fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Use python-config --includes rather than --cflags
perf script python: Fix dict reference counting
perf stat: Fix --interval_clear option
perf tools: Fix compilation errors on gcc8
perf test shell: Prevent temporary editor files from being considered test scripts
perf llvm-utils: Remove bashism from kernel include fetch script
perf test shell: Make perf's inet_pton test more portable
perf test shell: Replace '|&' with '2>&1 |' to work with more shells
perf scripts python: Add Python 3 support to EventClass.py
perf scripts python: Add Python 3 support to sched-migration.py
perf scripts python: Add Python 3 support to Util.py
perf scripts python: Add Python 3 support to SchedGui.py
perf scripts python: Add Python 3 support to Core.py
perf tools: Generate a Python script compatible with Python 2 and 3
Commit 0c3b7e4261 ("tools build: Add support for host programs format")
introduced host_c_flags which referenced CHOSTFLAGS. The actual name of the
variable is HOSTCFLAGS. Fix this up.
Fixes: 0c3b7e4261 ("tools build: Add support for host programs format")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Builds started failing in Fedora on Python 3.7 with:
`.gnu.debuglto_.debug_macro' referenced in section
`.gnu.debuglto_.debug_macro' of
util/scripting-engines/trace-event-python.o: defined in discarded
section
In Fedora, Python 3.7 added -flto to the list of --cflags and since it
was only applied to util/scripting-engines/trace-event-python.c and
scripts/python/Perf-Trace-Util/Context.c, linking failed.
It's not the first time the addition of flags has broken builds: commit
c6707fdef7 ("perf tools: Fix up build in hardnened environments")
appears to have fixed a similar problem. "python-config --includes"
provides the proper -I flags and doesn't introduce additional CFLAGS.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180710154612.6285-1-jcline@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dictionaries are attached to the parameter tuple that steals the
references and takes care of releasing them when appropriate. The code
should not decrement the reference counts explicitly. E.g. if libpython
has been built with reference debugging enabled, the superfluous DECREFs
will trigger this error when running perf script:
Fatal Python error: Objects/tupleobject.c:238 object at
0x7f10f2041b40 has negative ref count -1
Aborted (core dumped)
If the reference debugging is not enabled, the superfluous DECREFs might
cause the dict objects to be silently released while they are still in
use. This may trigger various other assertions or just cause perf
crashes and/or weird and unexpected data changes in the stored Python
objects.
Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jaroslav Skarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531133990-17485-1-git-send-email-janne.huttunen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are getting following warnings on gcc8 that break compilation:
$ make
CC jvmti/jvmti_agent.o
jvmti/jvmti_agent.c: In function ‘jvmti_open’:
jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \
writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=]
snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());
There's no point in checking the result of snprintf call in
jvmti_open, the following open call will fail in case the
name is mangled or too long.
Using tools/lib/ function scnprintf that touches the return value from
the snprintf() calls and thus get rid of those warnings.
$ make DEBUG=1
CC arch/x86/util/perf_regs.o
arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’:
arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul
copying 2 bytes from a string of the same length [-Werror=stringop-truncation]
strncpy(prefix, "+0", 2);
^~~~~~~~~~~~~~~~~~~~~~~~
Using scnprintf instead of the strncpy (which we know is safe in here)
to get rid of that warning.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180702134202.17745-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allows a perf shell test developer to concurrently edit and run their
test scripts, avoiding perf test attempts to execute their editor
temporary files, such as seen here:
$ sudo taskset -c 0 ./perf test -vvvvvvvv -F 63
63: 0VIM 8.0 :
--- start ---
sh: 1: ./tests/shell/.record+probe_libc_inet_pton.sh.swp: Permission denied
---- end ----
0VIM 8.0: FAILED!
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124658.15a506b41fc4539c08eb9426@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like system(), popen() calls /bin/sh, which may/may not be bash.
Script when run on dash and encounters the line, yields:
exit: Illegal number: -1
checkbashisms report on script content:
possible bashism (exit|return with negative status code):
exit -1
Remove the bashism and use the more portable non-zero failure
status code 1.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Debian based systems such as Ubuntu have dash as their default shell.
Even if the normal or root user's shell is bash, certain scripts still
call /bin/sh, which points to dash, so we fix this perf test by
rewriting it in a more portable way.
BEFORE:
$ sudo perf test -v 64
64: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 31942
./tests/shell/record+probe_libc_inet_pton.sh: 18: ./tests/shell/record+probe_libc_inet_pton.sh: expected[0]=ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\): not found
./tests/shell/record+probe_libc_inet_pton.sh: 19: ./tests/shell/record+probe_libc_inet_pton.sh: expected[1]=.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so|inlined\)$: not found
./tests/shell/record+probe_libc_inet_pton.sh: 29: ./tests/shell/record+probe_libc_inet_pton.sh: expected[2]=getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/lib/x86_64-linux-gnu/libc-2.27.so\)$: not found
./tests/shell/record+probe_libc_inet_pton.sh: 30: ./tests/shell/record+probe_libc_inet_pton.sh: expected[3]=.*\+0x[[:xdigit:]]+[[:space:]]\(.*/bin/ping.*\)$: not found
ping 31963 [004] 83577.670613: probe_libc:inet_pton: (7fe15f87f4b0)
./tests/shell/record+probe_libc_inet_pton.sh: 39: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution
./tests/shell/record+probe_libc_inet_pton.sh: 41: ./tests/shell/record+probe_libc_inet_pton.sh: Bad substitution
test child finished with -2
---- end ----
probe libc's inet_pton & backtrace it with ping: Skip
AFTER:
$ sudo perf test -v 64
64: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 32277
ping 32295 [001] 83679.690020: probe_libc:inet_pton: (7ff244f504b0)
7ff244f504b0 __GI___inet_pton+0x0 (/lib/x86_64-linux-gnu/libc-2.27.so)
7ff244f14ce4 getaddrinfo+0x124 (/lib/x86_64-linux-gnu/libc-2.27.so)
556ac036b57d _init+0xb75 (/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124643.2089b3ce59960eba34e87b27@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
BEFORE:
$ sudo perf test -v 62
62: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 27305
./tests/shell/trace+probe_vfs_getname.sh: 20: ./tests/shell/trace+probe_vfs_getname.sh: Syntax error: "&" unexpected
test child finished with -2
---- end ----
Check open filename arg using perf trace + vfs_getname: Skip
AFTER:
$ sudo perf test -v 62
64: Check open filename arg using perf trace + vfs_getname :
--- start ---
test child forked, pid 23008
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
0.361 ( 0.008 ms): touch/23032 openat(dfd: CWD, filename: /tmp/temporary_file.VEh0n, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 4
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
Similar to commit 35435cd060, with the same title.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124633.0a9f4bea54b8d2c28f265de2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in EventClass.py. ``print`` is now a
function rather than a statement. This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a73aac-e0734bdc-dcab-4c61-8333-d8be97524aa0-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in the sched-migration.py script.
This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a737a5-44ec436f-3440-4cac-a03f-ddfa589bf308-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in Util.py. The dict class no longer
has a ``has_key`` method and print is now a function rather than a
statement. This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a730c6-8db8b9b1-da2d-4ee3-96bf-47e0ae9796bd-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a single syntax error in SchedGui.py to support both Python 2 and
Python 3. This should have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a72d26-75729663-fe55-4309-8c9b-302e065ed2f1-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in Core.py. This should have no
functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/0100016341a72ebe-e572899e-f445-4765-98f0-c314935727f9-000000@email.amazonses.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf bench: (Jiri Olsa):
. Fix NUMA report output code handling of less than 1s runtimes.
perf script: (Ravi Bangoria)
. Add missing output fields in a 'perf script -h' hint.
. Fix crash because of missing evsel->priv.
. Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE], which
is just a end of features header marker.
perf stat: (Thomas Richter)
. Remove duplicate event counting
perf test:
. Wire parsing error handling in 'parse events' test (Jiri Olsa)
. Fix 'session topology' test on s/390 (Thomas Richter)
eBPF: (Yonghong Song)
. Fix a clang 7.0 compilation error when building perf linking
with libclang
intel-pt: (Adrian Hunter)
. Fix packet decoding of CYC packets.
Copies of kernel files: (Arnaldo Carvalho de Melo)
. Synchronize drm/drm.h UAPI
. Update x86's syscall_64.tbl, adding support for 'io_pgetevents' and 'rseq'
in 'perf trace'.
. Update powerpc uapi/asm/unistd.h, adding support for the 'rseq' syscall.
. Update if_link.h and bpf.h, no effect on tool features.
PowerPC: (Sandipan Das)
. Fix crash if callchain is empty.
s/390: (Thomas Richter)
. Support random socked_id assignment in the perf header.
. Support s390 random socket_id assignment in perf.data file.
. Make PMU alias definitions taken from sysfs and JSON files comparable
by normalizing them wrt spaces and newlines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=96FW
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-4.18-20180625' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf bench: (Jiri Olsa):
- Fix NUMA report output code handling of less than 1s runtimes.
perf script: (Ravi Bangoria)
- Add missing output fields in a 'perf script -h' hint.
- Fix crash because of missing evsel->priv.
- Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE], which
is just a end of features header marker.
perf stat: (Thomas Richter)
- Remove duplicate event counting
perf test:
- Wire parsing error handling in 'parse events' test (Jiri Olsa)
- Fix 'session topology' test on s/390 (Thomas Richter)
eBPF: (Yonghong Song)
- Fix a clang 7.0 compilation error when building perf linking
with libclang
intel-pt: (Adrian Hunter)
- Fix packet decoding of CYC packets.
Copies of kernel files: (Arnaldo Carvalho de Melo)
- Synchronize drm/drm.h UAPI
- Update x86's syscall_64.tbl, adding support for 'io_pgetevents' and 'rseq'
in 'perf trace'.
- Update powerpc uapi/asm/unistd.h, adding support for the 'rseq' syscall.
- Update if_link.h and bpf.h, no effect on tool features.
PowerPC: (Sandipan Das)
- Fix crash if callchain is empty.
s/390: (Thomas Richter)
- Support random socked_id assignment in the perf header.
- Support s390 random socket_id assignment in perf.data file.
- Make PMU alias definitions taken from sysfs and JSON files comparable
by normalizing them wrt spaces and newlines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE]
which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is
used as an end marker for the perf report but it's unused for perf
script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate,
just like it is done in 'perf report'.
Before:
# perf record -o - ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
#
After:
# perf record -o - ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60
ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 57b5de4639 ("perf report: Support forced leader feature in pipe mode")
Link: http://lkml.kernel.org/r/20180625124220.6434-4-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A few fields are missing in a perf script -F hint. Add them.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20180625124220.6434-2-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we can hit following assert when running numa bench:
$ perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0cm --thp 1
perf: bench/numa.c:1577: __bench_numa: Assertion `!(!(((wait_stat) & 0x7f) == 0))' failed.
The assertion is correct, because we hit the SIGFPE in following line:
Thread 2.2 "thread 0/0" received signal SIGFPE, Arithmetic exception.
[Switching to Thread 0x7fffd28c6700 (LWP 11750)]
0x000.. in worker_thread (__tdata=0x7.. ) at bench/numa.c:1257
1257 td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9;
We don't check if the runtime is actually bigger than 1 second,
and thus this might end up with zero division within FPU.
Adding the check to prevent this.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180620094036.17278-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf stat' shows a mismatch in perf stat regarding counter names on
s390:
Run command:
[root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v --
~/mytesttx 1 >/tmp/111
tx_nc_tend: 1 573146 573146
tx_nc_tend: 1 573146 573146
Performance counter stats for '/root/mytesttx 1':
3 tx_nc_tend
0.001037252 seconds time elapsed
[root@s35lp76 perf]#
shows transaction counter tx_nc_tend with value 3 but it was triggered
only once as seen by the output of mytesttx.
When looking up the event name tx_nc_tend the following function
sequence is called:
parse_events_multi_pmu_add()
+--> perf_pmu__scan() being called with NULL argument
+--> pmu_read_sysfs() scans directory ../devices/ for
all PMUs
+--> perf_pmu__find() tries to find a PMU in the
global pmu list.
+--> pmu_lookup() called to read all file
entries when not in global
list.
pmu_lookup() causes the issue. It calls
+---> pmu_aliases() to read all the entries in the PMU directory.
On s390 this is named
/sys/devices/cpum_cf/events.
+--> pmu_aliases_parse() reads all files and creates an
alias for each file name.
So we end up with first entry created by
reading the sysfs file
[root@s35lp76 perf]# cat /sys/devices/cpum_cf
/events/TX_NC_TEND
event=0x008d
[root@s35lp76 perf]#
Debug output shows this entry
tx_nc_tend -> 'cpum_cf'/'event=0x008d
'/
After all files in this directory have been
read and aliases created this function is called:
+--> pmu_add_cpu_aliases()
This function looks up the CPU tables
created by the json files.
With json files for s390 now available all
the aliases are added to
the PMU alias list a second time.
The second entry is added by
reading the json file converted by jevent
resulting in file pmu-events/pmu-events.c:
{
.name = "tx_nc_tend",
.event = "event=0x8d",
.desc = "Unit: cpum_cf Completed TEND \
instructions \
in non-constrained TX mode",
.topic = "extended",
.long_desc = "A TEND instruction has \
completed in a \
non-constrained \
transactional-execution mode",
.pmu = "cpum_cf",
},
Debug output shows this entry
tx_nc_tend -> 'cpum_cf'/'event=0x8d'/
Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use
__perf_pmu__new_alias() to add an alias to the PMU alias list. There is
no check if an alias already exist
So we end up with 2 entries for tx_nc_tend in the PMU alias list.
Having set up the PMU alias list for this PMU now
parse_events_multi_add_pmu() reads the complete alias list and adds each
alias with parse_events_add_pmu() to the global perfev_list. This
causes the alias to be added multiple times to the event list.
Fix this by making __perf_pmu__new_alias() to merge alias definitions if
an alias is already on the alias list. Also print a debug message when
the alias has mismatches in some fields.
Output before:
[root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \
-- ~/mytesttx 1 >/tmp/111
tx_nc_tend: 1 551446 551446
Performance counter stats for '/root/mytesttx 1':
3 tx_nc_tend
0.000961134 seconds time elapsed
[root@s35lp76 perf]#
Output after:
[root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \
-- ~/mytesttx 1 >/tmp/111
tx_nc_tend: 1 551446 551446
Performance counter stats for '/root/mytesttx 1':
1 tx_nc_tend
0.000961134 seconds time elapsed
[root@s35lp76 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180615101105.47047-3-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PMU alias definitions in sysfs files may have spaces, newlines and
numbers with leading zeroes. Some alias definitions may also appear in
JSON files without spaces, etc.
Scan alias definitions and remove leading zeroes, spaces, newlines, etc
and rebuild string to make alias->str member comparable.
s390 for example has terms specified as event=0x0091 (read from files
../<PMU>/events/<FILE> and terms specified as event=0x91 (read from JSON
files).
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180615101105.47047-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove a trailing newline when reading sysfs file contents such as
/sys/devices/cpum_cf/events/TX_NC_TEND. This shows when verbose option
-v is used.
Output before:
tx_nc_tend -> 'cpum_cf'/'event=0x008d
'/
Output after:
tx_nc_tend -> 'cpum_cf'/'event=0x8d'/
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180615101105.47047-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported the perf build failure with latest llvm/clang compiler
(7.0).
$ make LIBCLANGLLVM=1 -C tools/perf/
<SNIP>
CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o
util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::SmallVectorImpl<char> >
perf::getBPFObjectFromModule(llvm::Module*)’:
util/c++/clang.cpp:150:43: error: no matching function for call to
‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&,
llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’
TargetMachine::CGFT_ObjectFile)) {
^
In file included from util/c++/clang.cpp:25:0:
/usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate:
virtual bool llvm::TargetMachine::addPassesToEmitFile(
llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&,
llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool,
llvm::MachineModuleInfo*)
virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &,
^~~~~~~~~~~~~~~~~~~
/usr/local/include/llvm/Target/TargetMachine.h:254:16: note:
candidate expects 6 arguments, 3 provided
mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory
make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101:
/tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1
make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2
make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2
make[5]: *** Waiting for unfinished jobs....
CC /tmp/tmp.t53Qo38zci/tests/thread-map.o
The function addPassesToEmitFile signature changed in llvm 7.0 and such
a change caused the failure. This patch fixed the issue with using
proper function signatures under different compiler versions.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20180616174739.1076733-1-yhs@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This updates the tools/perf/ copy of the system call table for x86 which makes
'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no
matter in which system it gets built, i.e. older systems where the syscalls are
not available in the running kernel (via tracefs) or in the system headers will
still be aware of these syscalls/.
These are the csets introducing the source drift:
05c17cedf8 ("x86: Wire up restartable sequence system call")
7a074e96de ("aio: implement io_pgetevents")
This results in this build time change:
$ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c
--- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300
+++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300
@@ -332,5 +332,7 @@
[330] = "pkey_alloc",
[331] = "pkey_free",
[332] = "statx",
+ [333] = "io_pgetevents",
+ [334] = "rseq",
};
-#define SYSCALLTBL_x86_64_MAX_ID 332
+#define SYSCALLTBL_x86_64_MAX_ID 334
$
This silences the following tools/perf/ build warning:
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-tfvyz51sabuzemrszbrhzxni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding optional 'valid' callback for events tests in parse-events
object, so we don't try to parse PMUs, which are not supported.
Following line is displayed for skipped test:
running test 52 'intel_pt//u'... SKIP
Committer note:
Use named initializers in the struct evlist_test variable to avoid
breaking the build on centos:5, 6 and others with a similar gcc:
cc1: warnings being treated as errors
tests/parse-events.c: In function 'test_pmu_events':
tests/parse-events.c:1817: error: missing initializer
tests/parse-events.c:1817: error: (near initialization for 'e.type')
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180611093422.1005-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing error handling for parse_events calls in test_event function
that led to following segfault on s390:
running test 52 'intel_pt//u'
perf: Segmentation fault
...
/lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106]
/lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96]
./perf(parse_events_add_pmu+0xb8) [0x80132088]
./perf(parse_events_parse+0xc62) [0x8019529a]
./perf(parse_events+0x98) [0x801341c0]
./perf(test__parse_events+0x48) [0x800cd140]
./perf(cmd_test+0x26a) [0x800bd44a]
test child interrupted
Adding the struct parse_events_error argument to parse_events call. Also
adding parse_events_print_error to get more details on the parsing
failures, like:
# perf test 6 -v
running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?'
event syntax error: 'intel_pt//u'
\___ Cannot find PMU `intel_pt'. Missing kernel support?
Committer note:
Use named initializers in the struct parse_events_error variable to
avoid breaking the build on centos5, 6 and others with a similar gcc:
cc1: warnings being treated as errors
tests/parse-events.c: In function 'test_event':
tests/parse-events.c:1696: error: missing initializer
tests/parse-events.c:1696: error: (near initialization for 'err.str')
Reported-by: Kim Phillips <kim.phillips@arm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180611093422.1005-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some cases, the callchain provided by the kernel may be empty. So,
the callchain ip filtering code will cause a crash if we do not check
whether the struct ip_callchain pointer is NULL before accessing any
members.
This can be observed on a powerpc64le system running Fedora 27 as shown
below.
# perf record -b -e cycles:u ls
Before:
# perf report --branch-history
perf: Segmentation fault
-------- backtrace --------
perf[0x1027615c]
linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8]
perf(arch_skip_callchain_idx+0x44)[0x10257c58]
perf[0x1017f2e4]
perf(thread__resolve_callchain+0x124)[0x1017ff5c]
perf(sample__resolve_callchain+0xf0)[0x10172788]
...
After:
# perf report --branch-history
Samples: 25 of event 'cycles:u', Event count (approx.): 2306870
Overhead Source:Line Symbol Shared Object
+ 11.60% _init+35736 [.] _init ls
+ 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so
+ 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so
+ 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so
+ 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so
+ 8.83% _init+236 [.] _init ls
...
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180611104049.11048-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 this test case fails because the socket identifiction numbers
assigned to the CPU are higher than the CPU identification numbers.
F/ix this by adding the platform architecture into the perf data header
flag information. This helps identifiing the test platform and handles
s390 specifics in process_cpu_topology().
Before:
[root@p23lp27 perf]# perf test -vvvvv -F 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-iUv755
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
After:
[root@p23lp27 perf]# perf test -vvvvv -F 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-8X8VTs
CPU 0, core 0, socket 6
CPU 1, core 1, socket 3
---- end ----
Session topology: Ok
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fixes: c84974ed9f ("perf test: Add entry to test cpu topology")
Link: http://lkml.kernel.org/r/20180611073153.15592-2-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On s390 the socket identifier assigned to a CPU identifier is random and
(depending on the configuration of the LPAR) may be higher than the CPU
identifier. This is currently not supported.
Fix this by allowing arbitrary socket identifiers being assigned to
CPU id.
Output before:
[root@p23lp27 perf]# ./perf report --header -I -v
...
socket_id number is too big.You may need to upgrade the perf tool.
Error:
The perf.data file has no samples!
# ========
# captured on : Tue May 29 09:29:57 2018
# header version : 1
...
# Core ID and Socket ID information is not available
...
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf report --header -I -v
...
Error:
The perf.data file has no samples!
# ========
# captured on : Tue May 29 09:29:57 2018
# header version : 1
...
# CPU 0: Core ID 0, Socket ID 6
# CPU 1: Core ID 1, Socket ID 3
# CPU 2: Core ID -1, Socket ID -1
...
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180611073153.15592-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
Kernel side:
- Remove an incorrect warning in uprobe_init_insn() when
insn_get_length() fails. The error return code is handled at the
call site.
- Move the inline keyword to the right place in the perf ringbuffer
code to address a W=1 build warning.
Tooling:
perf stat:
- Fix metric column header display alignment
- Improve error messages for default attributes, providing better
output for error in command line.
- Add --interval-clear option, to provide a 'watch' like printing
perf script:
- Show hw-cache events too
perf c2c:
- Fix data dependency problem in layout of 'struct c2c_hist_entry'
Core:
- Do not blindly assume that 'struct perf_evsel' can be obtained via
a straight forward container_of() as there are call sites which
hand in a plain 'struct hist' which is not part of a container.
- Fix error index in the PMU event parser, so that error messages can
point to the problematic token"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Move the inline keyword at the beginning of the function declaration
uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
perf script: Show hw-cache events
perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
perf stat: Add event parsing error handling to add_default_attributes
perf stat: Allow to specify specific metric column len
perf stat: Fix metric column header display alignment
perf stat: Use only color_fprintf call in print_metric_only
perf stat: Add --interval-clear option
perf tools: Fix error index for pmu event parser
perf hists: Reimplement hists__has_callchains()
perf hists browser gtk: Use hist_entry__has_callchains()
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
perf hists: Save the callchain_size in struct hist_entry
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Exactly as the comment just before 'struct c2c_hist_entry" says, i.e.
the last entry in struct hist_entry is a zero length array, that when
allocating space for hist_entry gets extra space if callchains are in
use, which, if hist_entry is not at the end of c2c_hist_entry, the
members after it gets corrupted when callchains get added to the rb
trees collecting them, etc.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Fixes: 7f834c2e84 ("perf c2c report: Display node for cacheline address")
Link: http://lkml.kernel.org/n/tip-bh0ke4fh2ygpj3yowna7o1di@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following change will introduce new metrics, that doesn't need such
wide hard coded spacing. Switch METRIC_ONLY_LEN macro usage with
metric_only_len variable.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can call color_fprintf also for non color case, it's handled
properly. This change simplifies following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding --interval-clear option to clear the screen before next interval.
Committer testing:
# perf stat -I 1000 --interval-clear
And, as expected, it behaves almost like:
# watch -n 0 perf stat -a sleep 1
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are places where we have only access to struct hists and need to
know if any of its hist_entries has callchains, like when drawing
headers for the various output modes (stdio, TUI, etc), so, when adding
a new hist_entry, check if it has callchains, storing this info for
later use by hists__has_callchains().
This reimplementation is necessary because not always a 'struct hists'
is allocated together with a 'struct perf evsel', so we can't go from
'hists' to 'perf_event_attr.sample_type & PERF_SAMPLE_CALLCHAIN'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hg5g7yddjio3ljwyqnnaj5dt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter