Support for AMDGPU specific FreeSync properties and ioctls are dropped
from amdgpu_dm in favor of supporting drm variable refresh rate
properties.
The notify_freesync and set_freesync_property functions are dropped
from amdgpu_display_funcs.
The drm vrr_capable property is now attached to any DP/HDMI connector.
Its value is updated accordingly to the connector's FreeSync capabiltiy.
The freesync_enable logic and ioctl control has has been dropped in
favor of utilizing the vrr_enabled on the drm CRTC. This allows for more
fine grained atomic control over which CRTCs should support variable
refresh rate.
To handle state changes for vrr_enabled it was easiest to drop the
forced modeset on freesync_enabled change. This patch now performs the
required stream updates when planes are flipped.
This is done for a few reasons:
(1) VRR stream updates can be done in the fast update path
(2) amdgpu_dm_atomic_check would need to be hacked apart to check
desired variable refresh state and capability before the CRTC
disable pass.
(3) Performing VRR stream updates on-flip is needed for enabling BTR
support.
VRR packets and timing adjustments are now tracked and compared to
previous values sent to the hardware.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove drm/drm_fb_helper.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adaptive Backlight Management (ABM) is a feature
that reduces backlight level to save power, while
increasing pixel contrast and pixel luminance
to maintain readability and image quality.
ABM will adjust in response to the
pixel luminance of the displayed content.
ABM is made available as a drm property on eDP
monitors called "abm level", which ranges from 0 to 4.
When this property is set to 0, ABM is off. Levels 1
to 4 represent different ranges of backlight reduction.
At higher levels both the backlight reduction and pixel
adjustment will be greater.
ABM requires DMCU firmware, which is currently available for
Raven ASICs only. If the feature does not work, please
ensure your firmware is up to date.
v2:
Fix commit message, only attach property if DMCU loaded
v3:
Store ABM level in crtc state to accommodate dc
v4:
Fix ABM saving on dpms cycle
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.
This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.
This proprety should be removed once common drm support for max bpc
lands.
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since drm_framebuffer can now store GEM objects directly, place them
there rather than in our own subclass. As this makes the framebuffer
create_handle and destroy functions the same as the GEM framebuffer
helper, we can reuse those.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They were used by amdgpu_dm at some point but since it has its own
amdgpu_dm_connector now these aren't needed anymore.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Save/restore the backlight level scratch register in S3/S4 so the
backlight level comes back at the previously requested level.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047
Fixes: 4ec6ecf48c (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling)
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer used since we changed the MC programming sequence.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Remove the unused driver implementations.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used anymore.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's no longer used. In fact, there is no more dc_stream object.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No more need since Andrey's change to use drm_crtc's version
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hook up dc_surface creation/destruction to dm_plane_state.
Rename amdgpu_drm_plane_state to dm_plane_state and do
minor cleanups.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link index is an unnecessery level of inderection when
calling from kernel i2c/aux transfer into DAL.
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces amdgpu_drm_plane_state
structure, which subclasses drm_plane_state and
holds data suitable for configuring hardware.
It switches reset(), atomic_duplicate_state()
& atomic_destroy_state() functions to new internal
implementation, earlier they were pointing to
drm core functions.
TESTS(On Chromium OS on Stoney Only)
* Builds without compilation errors.
* 'plane_test' passes for XR24 format
based Overlay plane.
* Chromium OS ui comes up.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Current design has per-crtc-plane model.
As a result, for asic's that support underlay,
are unable to expose it to user space for modesetting.
To enable this, the drm driver intialisation now runs
for number of surfaces instead of stream/crtc.
This patch plumbs surface capabilities to drm framework
so that it can be effectively used by user space.
Tests: (On Chromium OS for Stoney Only)
* 'modetest -p' now shows additional plane
with YUV capabilities in case of CZ and ST.
* 'plane_test' fails with below error:
[drm:amdgpu_dm_connector_atomic_set_property [amdgpu]] *ERROR* Unsupported screen depth 0
as ther is no support for YUYV
* Checked multimonitor display works fine
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dc_target does not fit well into DRM framework so removed it.
This will prevent the driver from leveraging the pipe-split
code for tiled displays, so will have to be handled at a higher
level. Most places that used dc_target now directly use dc_stream
instead.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Supported DCE versions: 8.0, 10.0, 11.0, 11.2
v2: rebase against 4.11
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is needed to ensure every single DC commit builds. Reverting
this again when it's no longer needed by DC.
This reverts commit 98da65d5e3.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- vc4: Add ioctl to allow attaching a label to a bo (Eric)
- Add new format/modifier blob plane property (Ben)
- armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko)
- [kinda uapi] fb_helper: Expose display_info size via fb_info (David)
Core Changes:
- Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf)
- Simplify atomic properties by removing the helpers and handling in core (Daniel)
Driver Changes:
- stm: Add STM32 DSI controller driver (Phillipe)
- vc4: Add HDMI CEC support (Hans)
- rockchip: Refactor register init & soc version handling (Mark)
- misc: Remove .load_lut, .gamma_set, .gamma_get dead code (Peter)
- dw-hdmi: Add HDMI CEC support (Russell)
Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: David Lechner <david@lechnology.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits)
drm: Nuke drm_atomic_legacy_backoff
drm: Nuke drm_atomic_helper_connector_dpms
drm: Nuke drm_atomic_helper_connector_set_property
drm: Nuke drm_atomic_helper_plane_set_property
drm: Nuke drm_atomic_helper_crtc_set_property
drm: Handle properties in the core for atomic drivers
drm: Don't update property values for atomic drivers
drm/omap: Rework the rotation-on-crtc hack
drm/radeon: Use the drm_driver.dumb_destroy default
drm/i915: Use the drm_driver.dumb_destroy default
drm/sti: Use .dumb_map_offset and .dumb_destroy defaults
drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
drm/fb-helper: pass physical dimensions to fbdev
uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
drm/bridge: dw-hdmi: remove CEC engine register definitions
drm/bridge: dw-hdmi: add cec driver
drm/bridge: dw-hdmi: add missing cec_notifier_put
drm: remove unused and redundant callbacks
staging: vboxvideo: remove dead gamma lut code
drm: dw-hdmi-i2s: add missing company name on Copyright
...
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se
These are no longer needed now that we use the fb_location
programmed by the vbios.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Return -ENODEV instead of -ENXIO when creating cma fb w/o valid gem (Daniel)
- Add aspect ratio and custom scaling propertis to connector state (Maarten)
Cross-subsystem Changes:
- None
Core Changes:
- Add Laurent as bridge reviewer and Andrzej as bridge maintainer (Archit)
- Maintain new STM driver through -misc (Yannick)
- Misc doc improvements (as is tradition) (Daniel)
- Add driver-private objects to atomic state (Dhinakaran)
- Deprecate preclose hook in modern drivers (use postclose) (Daniel)
- Add hwmode to vblank struct. This fixes mode access in irq context and reduced
a bunch of boilerplate (Daniel)
Driver Changes:
- vc4: Add out-fence support to vc4 V3D rendering (Eric)
- stm: Add stm32f429 display hw and am-480272h3tmqw-t01h panel support (Yannick)
- vc4: Remove 256MB cma limit from vc4 (Eric)
- dw-hdmi: Disable audio when inactive, instead of always enabled (Romain)
- zte: Add support for VGA to the ZTE driver (Shawn)
- i915: Track DP MST bandwidth and check it in atomic_check (Dhinakaran)
- vgem: Enable gem dmabuf import iface to facilitate ion testing (Laura)
- vc4: Add support for Cygnus (new dt compat string + couple bug fixes) (Eric)
- pl111: Add driver for pl111 CLCD display controller (Eric/Tom)
- vgem: Subclass drm_device instead of standalone platform device (Chris)
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tom Cooksey <tom.cooksey@arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-next-2017-05-16' of git://anongit.freedesktop.org/git/drm-misc: (72 commits)
drm: add missing declaration to drm_blend.h
drm/dp: Wait up all outstanding tx waiters
drm/dp: Read the tx msg state once after checking for an event
drm/prime: Forward declare struct device
drm/vblank: Lock down vblank->hwmode more
drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos
drm/vblank: Add FIXME comments about moving the vblank ts hooks
drm/vblank: Switch to bool in_vblank_irq in get_vblank_timestamp
drm/vblank: Switch drm_driver->get_vblank_timestamp to return a bool
drm/vgem: Convert to a struct drm_device subclass
gpu: drm: gma500: remove dead code
drm/sti: Adjust two checks for null pointers in sti_hqvdp_probe()
drm/sti: Fix typos in a comment line
drm/sti: Fix a typo in a comment line
drm/sti: Replace 17 seq_puts() calls by seq_putc()
drm/sti: Reduce function calls for sequence output at five places
drm/sti: use seq_puts to display a string
drm: Nerf the preclose callback for modern drivers
drm/exynos: Merge pre/postclose hooks
drm/tegra: switch to postclose
...
If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:
- All legacy drivers look at crtc->hwmode. But that is updated already
at the beginning of the modeset helper, which means when we disable
a pipe. Hence the final timestamps might be a bit off. But since
this is an existing bug I'm not going to change it, but just try to
be bug-for-bug compatible with the current code. This only applies
to radeon&amdgpu.
- i915 tries to get it perfect by updating crtc->hwmode when the pipe
is off (i.e. vblank->enabled = false).
- All other atomic drivers look at crtc->state->adjusted_mode. Those
that look at state->requested_mode simply don't adjust their mode,
so it's the same. That has two problems: Accessing crtc->state from
interrupt handling code is unsafe, and it's updated before we shut
down the pipe. For nonblocking modesets it's even worse.
For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.
For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.
The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.
v2: Completely new approach, trying to mimick the i915 solution.
v3: Fixup kerneldoc.
v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.
v5: Fix typos and move misplaced hunks to the right patches (Neil).
v6: Undo hunk movement (kbuild).
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch
This reverts commit cb341a319f.
The purpose of the refactor was for amdgpu_crtc_prepare/submit_flip to
be used by the DC code, but that's no longer the case.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Surprisingly a lot of legacy drivers roll their own, for
runtime pm and because vmwgfx.
Also make nouveau's set_config static while at it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-19-daniel.vetter@ffwll.ch
Again just going through the motions, no functional changes in here.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch
Make pflip atomic friendly. Split the fuinction into
whatever can fail part and the actual flip submit part.
Call the pre-submit function before atomic states
are swapped so in case of error we can fail the
IOCTL.
v2:
Update due to target_vblank code change.
Fix identetation.
Change return type for amdgpu_crtc_submit_flip to void
v3: agd: fix formatting
Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
<drm/drm_crtc.h> used to define most of the in-kernel KMS API. It has
now been split into separate files for each object type, but still
includes most other KMS headers to avoid breaking driver compilation.
As a step towards fixing that problem, remove the inclusion of
<drm/drm_encoder.h> from <drm/drm_crtc.h> and include it instead where
appropriate. Also remove the forward declarations of the drm_encoder and
drm_encoder_helper_funcs structures from <drm/drm_crtc.h> as they're not
needed in the header.
<drm/drm_encoder.h> now has to include <drm/drm_mode.h> and contain a
forward declaration of struct drm_encoder in order to allow including it
as the first header in a compilation unit.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sinclair Yeh <syeh@vmware.com> # For vmwgfx
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1481709550-29226-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com
Enable multi crtcs for virtual display, user can set the number of crtcs
by amdgpu module parameter virtual_display.
v2: make timers per crtc
v3: agd: simplify implementation
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now we can program a flip during a vertical blank period, if it's the
one targeted by the flip (or a later one). This allows simplifying
amdgpu_flip_work_func considerably.
agd: update dce_virtual.c as well.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicholas Kazlauskas