SMB3 servers can respond with MaxTransactSize of more than 4M
that can cause a memory allocation error returned from kmalloc
in a lock codepath. Also the client doesn't support multicredit
requests now and allows buffer sizes of 65536 bytes only. Set
MaxTransactSize to this maximum supported value.
Cc: stable@vger.kernel.org # 3.7+
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
In the event that a send fails in an uncached write, or we end up
needing to reissue it (-EAGAIN case), we'll kfree the wdata but
the pages currently leak.
Fix this by adding a new kref release routine for uncached writedata
that releases the pages, and have the uncached codepaths use that.
[original patch by Jeff modified to fix minor formatting problems]
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
When we are running SMB3 or SMB3.02 connections which are signed
we need to validate the protocol negotiation information,
to ensure that the negotiate protocol response was not tampered with.
Add the missing FSCTL which is sent at mount time (immediately after
the SMB3 Tree Connect) to validate that the capabilities match
what we think the server sent.
"Secure dialect negotiation is introduced in SMB3 to protect against
man-in-the-middle attempt to downgrade dialect negotiation.
The idea is to prevent an eavesdropper from downgrading the initially
negotiated dialect and capabilities between the client and the server."
For more explanation see 2.2.31.4 of MS-SMB2 or
http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
This third version of the patch, incorparating feedback from David Disseldorp
extends the ability of copychunk (refcopy) over smb2/smb3 mounts to
handle servers with smaller than usual maximum chunk sizes
and also fixes it to handle files bigger than the maximum chunk sizes
In the future this can be extended further to handle sending
multiple chunk requests in on SMB2 ioctl request which will
further improve performance, but even with one 1MB chunk per
request the speedup on cp is quite large.
Reviewed-by: David Disseldorp <ddiss@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Patch 2 of the copy chunk series (the final patch will
use these to handle copies of files larger than the chunk size.
We set the same defaults that Windows and Samba expect for
CopyChunk.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
In SMB3 it is now possible to query the file system
alignment info, and the preferred (for performance)
sector size and whether the underlying disk
has no seek penalty (like SSD).
Query this information at mount time for SMB3,
and make it visible in /proc/fs/cifs/DebugData
for debugging purposes.
This alignment information and preferred sector
size info will be helpful for the copy offload
patches to setup the right chunks in the CopyChunk
requests. Presumably the knowledge that the
underlying disk is SSD could also help us
make better readahead and writebehind
decisions (something to look at in the future).
Signed-off-by: Steve French <smfrench@gmail.com>
Currently SMB2 and SMB3 mounts do not query the device information at mount time
from the server as is done for cifs. These can be useful for debugging.
This is a minor patch, that extends the previous one (which added ability to
query file system attributes at mount time - this returns the device
characteristics - also via in /proc/fs/cifs/DebugData)
Signed-off-by: Steve French <smfrench@gmail.com>
Currently SMB2 and SMB3 mounts do not query the file system attributes
from the server at mount time as is done for cifs. These can be useful for debugging.
Signed-off-by: Steve French <smfrench@gmail.com>
Allow cifs/smb2/smb3 to return whether or not a file is compressed
via lsattr, and allow SMB2/SMB3 to set the per-file compression
flag ("chattr +c filename" on an smb3 mount).
Windows users often set the compressed flag (it can be
done from the desktop and file manager). David Disseldorp
has patches to Samba server to support this (at least on btrfs)
which are complementary to this
Signed-off-by: Steve French <smfrench@gmail.com>
We were off by one calculating the length of ioctls in some cases
because the protocol specification for SMB2 ioctl includes a mininum
one byte payload but not all SMB2 ioctl requests actually have
a data buffer to send. We were also not zeroing out the
return buffer (in case of error this is helpful).
Signed-off-by: Steve French <smfrench@gmail.com>
Do not send SMB2 Logoff command when reconnecting, the way smb1
code base works.
Also, no need to wait for a credit for an echo command when one is already
in flight.
Without these changes, umount command hangs if the server is unresponsive
e.g. hibernating.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@us.ibm.com>
that force a client to purge cache pages when a server requests it.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
to make adding new types of lease buffers easier.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Switch smb2 code to use per session session key and smb3 code to
use per session signing key instead of per connection key to
generate signatures.
For that, we need to find a session to fetch the session key to
generate signature to match for every request and response packet.
We also forgo checking signature for a session setup response
from the server.
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Add a variable specific to NTLMSSP authentication to determine
whether to exchange keys during negotiation and authentication phases.
Since session key for smb1 is per smb connection, once a very first
sesion is established, there is no need for key exchange during
subsequent session setups. As a result, smb1 session setup code sets this
variable as false.
Since session key for smb2 and smb3 is per smb connection, we need to
exchange keys to generate session key for every sesion being established.
As a result, smb2/3 session setup code sets this variable as true.
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the post (successful) session setup code to respective dialect routines.
For smb1, session key is per smb connection.
For smb2/smb3, session key is per smb session.
If client and server do not require signing, free session key for smb1/2/3.
If client and server require signing
smb1 - Copy (kmemdup) session key for the first session to connection.
Free session key of that and subsequent sessions on this connection.
smb2 - For every session, keep the session key and free it when the
session is being shutdown.
smb3 - For every session, generate the smb3 signing key using the session key
and then free the session key.
There are two unrelated line formatting changes as well.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Convert cpu_to_le32(le32_to_cpu(E1) + E2) to use le32_add_cpu().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
that allows to access files through symlink created on a server.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Fix endian warning:
CHECK fs/cifs/smb2pdu.c
fs/cifs/smb2pdu.c:1068:40: warning: incorrect type in assignment (different base types)
fs/cifs/smb2pdu.c:1068:40: expected restricted __le32 [usertype] Next
fs/cifs/smb2pdu.c:1068:40: got unsigned long
Signed-off-by: Steve French <smfrench@gmail.com>
On reconnects, we need to reopen file and then obtain all byte-range
locks held by the client. SMB2 protocol provides feature to make
this process atomic by reconnecting to the same file handle
with all it's byte-range locks. This patch adds this capability
for SMB2 shares.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
to prepare it for further durable handle reconnect processing.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
by passing durable context together with a handle caching lease or
batch oplock.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
to make it easier to add other create context further.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
by passing a filename to a separate iovec regardless of its length.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
and eliminated unused file_attribute parms of SMB2_open.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
to prevent missing RqLs context if it's not the first one.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
If we would set SMB2_FLAGS_DFS_OPERATIONS on open we also would have
to pass the path on the Open SMB prefixed by \\server\share.
Not sure when we would need to do the augmented path (if ever) and
setting this flag breaks the SMB2 open operation since it is
illegal to send an empty path name (without \\server\share prefix)
when the DFS flag is set in the SMB open header. We could
consider setting the flag on all operations other than open
but it is safer to net set it for now.
Signed-off-by: Steve French <smfrench@gmail.com>
Dan Carpenter wrote:
The patch 7f420cee8bd6: "[CIFS] Charge at least one credit, if server
says that it supports multicredit" from Jun 23, 2013, leads to the
following Smatch complaint:
fs/cifs/smb2pdu.c:120 smb2_hdr_assemble()
warn: variable dereferenced before check 'tcon->ses' (see line 115)
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <smfrench@gmail.com>
According to MS-SMB2 section 2.2.4: if no blob, client picks default which
for us will be
ses->sectype = RawNTLMSSP;
but for time being this is also our only auth choice so doesn't matter
as long as we include this fix (which does not treat the empty
SecurityBuffer as an error as the code had been doing).
We just found a server which sets blob length to zero expecting raw so
this fixes negotiation with that server.
Signed-off-by: Steve French <smfrench@gmail.com>
This worker function is needed to send SMB2 fsctl
(and ioctl) requests including:
validating negotiation info (secure negotiate)
querying the servers network interfaces
copy offload (refcopy)
Followon patches for the above three will use this.
This patch also does general validation of the response.
In the future, as David Disseldorp notes, for the copychunk ioctl
case, we will want to enhance the response processing to allow
returning the chunk request limits to the caller (even
though the server returns an error, in that case we would
return data that the caller could use - see 2.2.32.1).
See MS-SMB2 Section 2.2.31 for more details on format of fsctl.
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
In SMB2.1 and later the server will usually set the large MTU flag, and
we need to charge at least one credit, if server says that since
it supports multicredit. Windows seems to let us get away with putting
a zero there, but they confirmed that it is wrong and the spec says
to put one there (if the request is under 64K and the CAP_LARGE_MTU
was returned during protocol negotiation by the server.
CC: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
for NUL terminated string, need alway set '\0' in the end.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Steve French <smfrench@gmail.com>
SMB3 protocol adds various optional per-share capabilities (and
SMB3.02 adds one more beyond that). Add ability to dump
(/proc/fs/cifs/DebugData) the share capabilities and share flags to
improve debugging.
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
The new Windows update supports SMB3.02 dialect, a minor update to SMB3.
This patch adds support for mounting with vers=3.02
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Now that we track what sort of NEGOTIATE response was received, stop
mandating that every session on a socket use the same type of auth.
Push that decision out into the session setup code, and make the sectype
a per-session property. This should allow us to mix multiple sectypes on
a socket as long as they are compatible with the NEGOTIATE response.
With this too, we can now eliminate the ses->secFlg field since that
info is redundant and harder to work with than a securityEnum.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.
Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.
This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Track what sort of NEGOTIATE response we get from the server, as that
will govern what sort of authentication types this socket will support.
There are three possibilities:
LANMAN: server sent legacy LANMAN-type response
UNENCAP: server sent a newer-style response, but extended security bit
wasn't set. This socket will only support unencapsulated auth types.
EXTENDED: server sent a newer-style response with the extended security
bit set. This is necessary to support krb5 and ntlmssp auth types.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Move the sanity checks for signed connections into a separate function.
SMB2's was a cut-and-paste job from CIFS code, so we can make them use
the same function.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
These look pretty cargo-culty to me, but let's be certain. Leave
them in place for now. Pop a WARN if it ever does happen. Also,
move to a more standard idiom for setting the "server" pointer.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
It's not obvious from reading the macro names that these macros
are for debugging. Convert the names to a single more typical
kernel style cifs_dbg macro.
cERROR(1, ...) -> cifs_dbg(VFS, ...)
cFYI(1, ...) -> cifs_dbg(FYI, ...)
cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...)
Move the terminating format newline from the macro to the call site.
Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the
"CIFS VFS: " prefix for VFS messages.
Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y)
$ size fs/cifs/cifs.ko*
text data bss dec hex filename
265245 2525 132 267902 4167e fs/cifs/cifs.ko.new
268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old
Other miscellaneous changes around these conversions:
o Miscellaneous typo fixes
o Add terminating \n's to almost all formats and remove them
from the macros to be more kernel style like. A few formats
previously had defective \n's
o Remove unnecessary OOM messages as kmalloc() calls dump_stack
o Coalesce formats to make grep easier,
added missing spaces when coalescing formats
o Use %s, __func__ instead of embedded function name
o Removed unnecessary "cifs: " prefixes
o Convert kzalloc with multiply to kcalloc
o Remove unused cifswarn macro
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Diana Vasile <kill.elohim@hotmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Steve French <smfrench@gmail.com>
SMB2 and later will return only 1 credit for session setup (phase 1)
not just for the negotiate protocol response. Do not disable
echoes and oplocks on session setup (we only need one credit
for tree connection anyway) as a resonse with only 1 credit
on phase 1 of sessionsetup is expected.
Fixes the "CIFS VFS: disabling echoes and oplocks" message
logged to dmesg.
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
We were checking incorrectly if signatures were required to be sent,
so were always sending signatures after the initial session establishment.
For SMB3 mounts (vers=3.0) this was a problem because we were putting
SMB2 signatures in SMB3 requests which would cause access denied
on mount (the tree connection would fail).
This might also be worth considering for stable (for 3.7), as the
error message on mount (access denied) is confusing to users and
there is no workaround if the server is configured to only
support smb3.0. I am ok either way.
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Based on whether the user (on mount command) chooses:
vers=3.0 (for smb3.0 support)
vers=2.1 (for smb2.1 support)
or (with subsequent patch, which will allow SMB2 support)
vers=2.0 (for original smb2.02 dialect support)
send only one dialect at a time during negotiate (we
had been sending a list).
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
and remove redundant (rsp == NULL) checks after SendReceive2.
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Pavel Shilovsky