Handling of special clock operations on power domain on/off sequences has
been moved to respective Exynos clock controller drivers, so there is no
need to keep the duplicated (and conflicting) code in Exynos power domain
driver. Mark clock related properties in Exynos power domain bindings as
deprecated. This change has no inpact on backwards-compatibility, as the
new drivers properly work with old DTBs (deprecated properties are
ignored).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Clocks related to DISP1 block require special handling for power domain
turn on/off sequences. Till now this was handled by Exynos power domain
driver, but that approach was limited only to some special cases. This
patch moves handling of those operations to clock controller driver.
This gives more flexibility and allows fine tune values of some
clock-specific registers. This patch moves handling of those mentioned
clocks to Exynos5 sub-CMU driver instantiated from Exynos5250 driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Clocks related to DISP, GSC and MFC blocks require special handling for
power domain turn on/off sequences. Till now this was handled by Exynos
power domain driver, but that approach was limited only to some special
cases. This patch moves handling of those operations to clock controller
driver. This gives more flexibility and allows fine tune values of some
clock-specific registers. This patch moves handling of those mentioned
clocks to Exynos5 sub-CMU driver instantiated from Exynos5420 driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Handling of clock reparenting will be move to clock controller driver,
so add possibility to blacklist clock handling on systems, where the
clock controller already does all needed operations. This is needed
to avoid potential deadlock on clock reparenting during power domain
on/off procedure.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Conversion to kbasename from Rob Herring.
-----BEGIN PGP SIGNATURE-----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=gwbs
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Pull "Samsung soc drivers changes for v4.14" from Krzysztof Kozłowski:
Conversion to kbasename from Rob Herring.
* tag 'samsung-drivers-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: Use kbasename instead of open coding
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Cc: Scott Wood <oss@buserror.net>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation to not store the full path of nodes in full_name, use
kbasename instead as it will work either with the full path or not.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
power domain. Till now, the name of node from DT was used which mostly is just
"power-domain". We need more than that.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJYk3brAAoJEME3ZuaGi4PXlLQP/jmi+uKo+1Ofc/X4r5flKuy7
s66sklaVUTFdZVDe7WjR8TW8alau90yM7mXSLi6iQkSBzoRgmkfB1j97PdzKiYj8
TKVGOfQSLcL/PqD0og+4yicPgaD2YfIJyeE5E0k3ETxQDi3+EVxdvcsjNEsYKA3n
V4TuWlTTbdOSRlqQBmH+VvECWMaYrT0Fn2j7lUX4jeAqlAj6NsQ7Ogq8pGPhikmF
rp2e/SMP1ZdylPsmHTTynpLE0PlkQ8Rwz2vYAu0YDL0rTCgqhIqctwZqPJ1pHwHW
/pw6X2nssPz3nzySWAvRQ3oyW2akWMq2Xibuu7RVI+iEj+rR5AeI6UUTZJ8DyY1H
uhzvXLMJ0XgkN5sobC+WUmA8T17s9tsYQHyFIOZdG8RmPwNa8zP4lJmBG4xOyfNG
xAJl/KhGJHIOrDotGpiovf8MqNEn/jPuiSK0jsFo2sLDNhdxJnOkcchAyGIGUGh1
b74TCgtMNTES50BZbWm0ijaSqk10CrI8wgkVomNLXdW7eGLLvISzLD5Fz/SNQev7
OJporWHONEFWWiH90hPns1ENW3KuEK29yZto9KtyojPAgWBCjSN2/X4vjH3h3rTv
Vca8ArtboFmLA1175oqvX+g6BGw4A0iCvQCgrZoTNRZSTwrbC4IEgImtWpg+n6YO
E5CNm5MIGjPlz9tSu1mX
=1AMJ
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-soc-pm-domains-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers
Pull "soc: samsung: pm_domains for v4.11" from Krzysztof Kozłowski:
Improve the PM domains driver for Exynos by displaying a user-friendly name of
power domain. Till now, the name of node from DT was used which mostly is just
"power-domain". We need more than that.
* tag 'samsung-drivers-soc-pm-domains-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: pm_domains: Read domain name from the new label property
soc: samsung: pm_domains: Remove message about failed memory allocation
soc: samsung: pm_domains: Remove unused name field
soc: samsung: pm_domains: Use full names in subdomains registration log
Device tree nodes for each power domain should use generic "power-domain"
name, so using it as a domain name doesn't give much benefits. This patch
adds support for human readable names defined in 'label' property. Such
names are visible to userspace and makes debugging much easier. When no
'label' property is found, driver keeps using the name constructed from
full node name.
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Memory subsystem already prints message about failed memory
allocation, there is no need to do it in the drivers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Name is now in generic pm domain structure, so there is no need to
duplicate it in private data.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Device tree none name for each power domain should be "power-domain", so
use a bit more descriptive full node name in messages about subdomain
registration. This way the following meaningless message:
power-domain has as child subdomain: power-domain.
is changed to a bit more meaningful one:
/soc/power-domain@105c40a0 has as child subdomain: /soc/power-domain@105c4020.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add a new compatible string for Exynos5433 because it uses the 0xf
value instead of 0x7 for domain on/off registers.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Update the EXYNOS PM domain code to use the of_genpd_add_subdomain()
and remove any calls to of_genpd_get_from_provider().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we merge
through arm-soc for historical reasons, is also sizable this time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=O8+y
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Driver updates for ARM SoCs.
A slew of changes this release cycle. The reset driver tree, that we
merge through arm-soc for historical reasons, is also sizable this
time around.
Among the changes:
- clps711x: Treewide changes to compatible strings, merged here for simplicity.
- Qualcomm: SCM firmware driver cleanups, move to platform driver
- ux500: Major cleanups, removal of old mach-specific infrastructure.
- Atmel external bus memory driver
- Move of brcmstb platform to the rest of bcm
- PMC driver updates for tegra, various fixes and improvements
- Samsung platform driver updates to support 64-bit Exynos platforms
- Reset controller cleanups moving to devm_reset_controller_register() APIs
- Reset controller driver for Amlogic Meson
- Reset controller driver for Hisilicon hi6220
- ARM SCPI power domain support"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits)
ARM: ux500: consolidate base platform files
ARM: ux500: move soc_id driver to drivers/soc
ARM: ux500: call ux500_setup_id later
ARM: ux500: consolidate soc_device code in id.c
ARM: ux500: remove cpu_is_u* helpers
ARM: ux500: use CLK_OF_DECLARE()
ARM: ux500: move l2x0 init to .init_irq
mfd: db8500 stop passing around platform data
ASoC: ab8500-codec: remove platform data based probe
ARM: ux500: move ab8500_regulator_plat_data into driver
ARM: ux500: remove unused regulator data
soc: raspberrypi-power: add CONFIG_OF dependency
firmware: scpi: add CONFIG_OF dependency
video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip
input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip
pwm: clps711x: Changing the compatibility string to match with the smallest supported chip
serial: clps711x: Changing the compatibility string to match with the smallest supported chip
irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip
clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip
clk: clps711x: Changing the compatibility string to match with the smallest supported chip
...
The ARMv8 Exynos family (Exynos5433 and Exynos7420) uses different value
(0xf instead of 0x7) for controlling the power domain on/off registers
(both for control and for status).
Choose the value depending on the compatible. This prepares the driver
for supporting ARMv8 SoCs.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Exynos PM domains driver does not have mach-specific dependencies so it
can be safely moved out of arm/mach-exynos to drivers/soc. This in
future will allow re-using it on ARM64 boards.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Marek Szyprowski