Delete a superfluous semicolon in getBPFObjectFromModule().
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Wei <albin_yang@163.com>
Link: http://lkml.kernel.org/r/1551710174-3349-1-git-send-email-albin_yang@163.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libbpf loader expects that some __btf_map_<MAP_NAME> structs be in
place with the keys and values types of maps so that one can store the
struct definitions and have them sent to the kernel via sys_bpf(fd, cmd
= BTF_LOAD) and then later be retrievable via sys_bpf(fd, cmd =
BPF_OBJ_GET_INFO_BY_FD) for use by tools such as 'bpftool map dump id
MAP_ID'.
Since we already have this for defining maps in 'perf trace' BPF events:
bpf_map(name, _type, type_key, type_val, _max_entries)
As used in the tools/perf/examples/bpf/augmented_raw_syscalls.c:
--- 8< ---
struct syscall {
bool enabled;
};
bpf_map(syscalls, ARRAY, int, struct syscall, 512);
--- 8< ---
All we need is to get all that already available info, piggyback on the
'bpf_map' define in tools/perf/include/bpf/bpf.h, that is included by
'perf trace' BPF programs and do that without requiring changes to the
BPF programs already defining maps using 'bpf_map()'.
So this is what we have before this patch:
1) With this in ~/.perfconfig to dump .c events as .o, aka save a copy
so that we can use the .o later as a pre-compiled BPF bytecode:
# grep '\[llvm\]' -A2 ~/.perfconfig
[llvm]
dump-obj = true
clang-opt = -g
#
# clang --version
clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/llvm/bin
2) Note the -g there so that we get clang to generate debuginfo, and
since the target is 'bpf' it will generate the BTF info in this
clang version (9.0).
3) Run a simple 'perf record' specifiying as an event the augmented_raw_syscalls.c
source code:
# perf record -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data ]
# file /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped
4) Look at the BTF structs encoded in it:
# pahole -F btf --sizes /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
syscall_enter_args 64 0
augmented_filename 264 0
syscall 1 0
syscall_exit_args 24 0
bpf_map 28 0
#
# pahole -F btf -C syscalls /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
# pahole -F btf -C syscall /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct syscall {
bool enabled; /* 0 1 */
/* size: 1, cachelines: 1, members: 1 */
/* last cacheline: 1 bytes */
};
#
5) Ok, with just this we don't have the markers expected by the libbpf
loader and when we run with this BPF bytecode, because we have:
# grep '\[trace\]' -A1 ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
6) Lets do a 'perf trace' system wide session using this BPF program:
# perf trace -e *mmsg,open*
Cache2 I/O/6885 openat(AT_FDCWD, "/home/acme/.cache/mozilla/firefox/ina67tev.default/cache2/entries/BA220AB2914006A7AE96D27BE6EA13DD77519FCA", O_RDWR|O_CREAT|O_TRUNC, S_IRUSR|S_IWUSR) = 106
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
DNS Res~ver #3/23340 openat(AT_FDCWD, "/etc/hosts", O_RDONLY|O_CLOEXEC) = 106
DNS Res~ver #3/23340 sendmmsg(106<socket:[3482690]>, 0x7f252f1fcaf0, 2, MSG_NOSIGNAL) = 2
Cache2 I/O/6885 openat(AT_FDCWD, "/home/acme/.cache/mozilla/firefox/ina67tev.default/cache2/entries/BA220AB2914006A7AE96D27BE6EA13DD77519FCA", O_RDWR) = 106
lighttpd/18915 openat(AT_FDCWD, "/proc/loadavg", O_RDONLY) = 12
7) While it runs lets see the maps that 'perf trace' + libbpf's BPF
loader loaded into the kernel via sys_bpf(fd, BPF_BTF_LOAD, ...):
# bpftool map list | tail -6
149: perf_event_array name __augmented_sys flags 0x0
key 4B value 4B max_entries 8 memlock 4096B
150: array name syscalls flags 0x0
key 4B value 1B max_entries 512 memlock 8192B
151: hash name pids_filtered flags 0x0
key 4B value 1B max_entries 64 memlock 8192B
#
8) Dump the "pids_filtered", map, that will have one entry per PID that
'perf trace' wants filtered, which includes its own, to avoid a
tracing feedback loop (perf trace shows the syscalls it does which
generates more syscalls that it has to show that...), it also
auto-filters the 'gnome-terminal' and 'sshd' parent PIDs, for the
same reason:
# bpftool map dump id 151
key: a5 0c 00 00 value: 01
key: 14 63 00 00 value: 01
Found 2 elements
#
9) Since there is no BTF info available, it does a generic hex dump :-\
10) Now, with this patch applied, we'll do steps 3 to 6 again and look
with pahole if there are extra structs encoded in BTF:
# pahole -F btf --sizes /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
syscall_enter_args 64 0
augmented_filename 264 0
syscall 1 0
syscall_exit_args 24 0
bpf_map 28 0
____btf_map___augmented_syscalls__ 8 0
____btf_map_syscalls 8 0
____btf_map_pids_filtered 8 0
#
11) Yes, those __btf_map_ + the map names, lets see how they look like:
# pahole -F btf -C ____btf_map_syscalls /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct ____btf_map_syscalls {
int key; /* 0 4 */
struct syscall value; /* 4 1 */
/* size: 8, cachelines: 1, members: 2 */
/* padding: 3 */
/* last cacheline: 8 bytes */
};
#
12) Lets repeat step 7 to get the new map ids:
# bpftool map list | tail -6
155: perf_event_array name __augmented_sys flags 0x0
key 4B value 4B max_entries 8 memlock 4096B
156: array name syscalls flags 0x0
key 4B value 1B max_entries 512 memlock 8192B
157: hash name pids_filtered flags 0x0
key 4B value 1B max_entries 64 memlock 8192B
#
13) And finally lets dump the 'pids_filtered':
# bpftool map dump id 157
[{
"key": 3237,
"value": true
},{
"key": 26435,
"value": true
}
]
#
Looks much better! BTF info was used to interpret the key as an integer
and the value as a struct with just one boolean member, so to make it
more compact, show just the 'true' value where we saw '01'.
Now to make 'perf trace --dump-map' to use BTF!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-ybuf9wpkm30xk28iq7jbwb40@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out a base class CallGraphModelBase from CallGraphModel, so that
CallGraphModelBase can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-76eybebzjwvgnadkm2oufrqi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of passing the tree root, get it from a method that can be
implemented in any derived class.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-ovcv28bg4mt9swk36ypdyz14@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out a base class TreeWindowBase from CallGraphWindow, so that
TreeWindowBase can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-ifirw0c0mhkwxg6l12lk6k4p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Export to the 'calls' table the newly created 'parent_id' and create an
index for it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-eybd6fnk6j9r7g643lsideoo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix SQL query error "invalid input syntax for integer":
Traceback (most recent call last):
File "tools/perf/scripts/python/export-to-postgresql.py", line 465, in <module>
do_query(query, 'CREATE VIEW calls_view AS '
File "tools/perf/scripts/python/export-to-postgresql.py", line 274, in do_query
raise Exception("Query failed: " + q.lastError().text())
Exception: Query failed: ERROR: invalid input syntax for integer: ""
LINE 1: ...ch_count,call_id,return_id,CASE WHEN flags=0 THEN '' WHEN fl...
^
(22P02) QPSQL: Unable to create query
Error running python script tools/perf/scripts/python/export-to-postgresql.py
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: f08046cb30 ("perf thread-stack: Represent jmps to the start of a different symbol")
Link: https://lkml.kernel.org/n/tip-strfpdozrvg7bi1xzrivxzqt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Export to the 'calls' table the newly created 'parent_id'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-b09oukl48rsl9azkp2wmh0bl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The call_path can be used to find the parent symbol for a call but not
the exact parent call. To do that add parent_id to the call_return
export. This enables the creation of a call tree from the exported data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-6j7tzdxo67cox6kan7k22oo6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When TSC is not available, "timeless" decoding is used but a divide by
zero occurs if perf_time_to_tsc() is called.
Ensure the divisor is not zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.9+
Link: https://lkml.kernel.org/n/tip-1i4j0wqoc8vlbkcizqqxpsf4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The message does not indicate the possibility that the symbol is not
found because the file does not exist.
Before:
$ perf record -e intel_pt//u --filter 'filter strcmp / strcpy @ foo ' ls
Symbol 'strcmp' not found.
Note that symbols must be functions.
Failed to parse address filter: 'filter strcmp / strcpy @ foo '
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter strcmp / strcpy @ foo ' ls
File 'foo' not found or has no symbols.
Symbol 'strcmp' not found.
Note that symbols must be functions.
Failed to parse address filter: 'filter strcmp / strcpy @ foo '
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-dvngzxd0jkplzw1ary69dilb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe' supports using just the kernel module name, but that will
work only when the module is loaded, or using the full pathname to the
file with the DWARF debug info, but the warning was cryptic:
Before:
# perf probe -m cls_flower -L fl_change
Failed to find the path for cls_flower: No such file or directory
Error: Failed to show lines.
#
After:
# perf probe -m cls_flower -L fl_change
Module cls_flower is not loaded, please specify its full path name.
Error: Failed to show lines.
# perf probe -m /lib/modules/5.0.0-rc7+/kernel/net/sched/cls_flower.ko -L fl_change | head -7
<fl_change@/home/acme/git/linux/net/sched/cls_flower.c:0>
0 static int fl_change(struct net *net, struct sk_buff *in_skb,
struct tcf_proto *tp, unsigned long base,
u32 handle, struct nlattr **tca,
void **arg, bool ovr, struct netlink_ext_ack *extack)
4 {
5 struct cls_fl_head *head = rtnl_dereference(tp->root);
#
The behaviour doesn't change when the module is loaded:
# modprobe cls_flower
# perf probe -m cls_flower -L fl_change | head -7
<fl_change@/home/acme/git/linux/net/sched/cls_flower.c:0>
0 static int fl_change(struct net *net, struct sk_buff *in_skb,
struct tcf_proto *tp, unsigned long base,
u32 handle, struct nlattr **tca,
void **arg, bool ovr, struct netlink_ext_ack *extack)
4 {
5 struct cls_fl_head *head = rtnl_dereference(tp->root);
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q4njvk9mshra00jacqjbzfn5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the syscall-counts-by-pid.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190222230619.17887-15-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the syscall-counts.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190222230619.17887-14-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the stat-cpi.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190222230619.17887-13-tonyj@suse.de
Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the stackcollapse.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com> <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-12-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the sctop.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-11-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the powerpc-hcalls.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-10-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the net_dropmonitor.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-9-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the mem-phys-addr.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190222230619.17887-8-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the failed-syscalls-by-pid.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-5-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the netdev-times.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2
version is now v2.6.
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Sanagi Koki <sanagi.koki@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-2-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using -F + syntax to add a field the existing defaults are
currently all marked user_set. This can cause errors when some field is
missing in the perf.data
This patch tracks the actually user set fields separately, so that we don't
error out in this case.
Before:
% perf record true
% perf script -F +metric
Samples for 'cycles:ppp' event do not have CPU attribute set. Cannot print 'cpu' field.
%
After:
5 perf record true
% perf script -F +metric
perf 28936 278636.237688: 1 cycles:ppp: ffffffff8117da99 perf_event_exec+0x59 (/lib/modules/4.20.0-odilo/build/vmlinux)
...
%
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224153722.27020-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_data__create_dir() to create nr files inside 'struct perf_data'
path directory:
int perf_data__create_dir(struct perf_data *data, int nr);
and function to close that data:
void perf_data__close_dir(struct perf_data *data);
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And display the error message from removing the old data file:
$ perf record ls
Can't remove old data: Permission denied (perf.data.old)
Perf session creation failed.
$ perf record ls
Can't remove old data: Unknown file found (perf.data.old)
Perf session creation failed.
Not sure how to make fail the rename (after we successfully remove the
destination file/dir) to show the message, anyway let's have it there.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change check_backup() to call rm_rf_perf_data() instead of unlink() to
work over directory paths.
Also move the call earlier in the code, before we fork for file/dir, so
it can backup also directory data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To remove perf.data including the directory, with checking on expected
files and no other directories inside.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add pattern argument to rm_rf_depth() (and rename it to rm_rf_depth_pat())
to specify the name pattern files need to match inside the directory.
The function fails if we find different file to remove.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding depth argument to rm_rf (and renaming it to rm_rf_depth) to
specify the depth we will go searching for files to remove.
It will be used to specify single depth for perf.data directory removal
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224190656.30163-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'path' member to 'struct perf_data'. It will keep the configured
path for the data (const char *). The path in struct perf_data_file is
now dynamically allocated (duped) from it.
This scheme is useful/used in following patches where struct
perf_data::path holds the 'configure' directory path and struct
perf_data_file::path holds the allocated path for specific files.
Also it actually makes the code little simpler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org
[ Fixup data-convert-bt.c missing conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are about to add support for multiple files, so we need each file to
keep its size.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a new report to display top calls by elapsed time. It displays calls
in descending order of time elapsed between when the function was called
and when it returned.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If no selection is made on the 'Selected branches' dialog, then the
output is the same as the 'All branches' report. That is not really an
error, and is not desirable for future reports, so remove it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove SQLTableDialogDataItem as it is no longer used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create new dialog data item classes to replace SQLTableDialogDataItem.
This separates out different dialog data items and makes it easier to
add new ones. SQLTableDialogDataItem is removed in a separate patch
because it makes the diff more readable.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The report name is a report variable so move it into into ReportVars.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out ReportVars to provide a single container for information from
report dialogs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out ReportDialogBase so it can be re-used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move column headers from SQLAutoTableModel into SQLTableModel so that
they can be used for other models based on SQLTableModel.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Call Graph depends on the calls table which is optional when exporting
data, so hide the Call Graph option if there is no calls table.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
exported-sql-viewer.py is a standalone python script and requires a
shebang. Also only python2 is supported at present. Restore the shebang
but use the more flexible 'env' form.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a38352de44 ("perf script python: Remove explicit shebang from Python script")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo