Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support. Nothing specifically sticks out this time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0DnU
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"Defconfig additions, removals, etc. Most of these are small changes
adding the options for newly upstreamed drivers, or drivers needed for
new board support. Nothing specifically sticks out this time"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (25 commits)
ARM: multi_v7_defconfig: enable CONFIG_EFI
ARM: multi_v7_defconfig: Build Atmel maXTouch driver as a module
ARM: defconfig: update the Integrator defconfig
ARM: keystone: defconfig: Fix USB configuration
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
ARM: mvebu_v5_defconfig: use MV88E6XXX
ARM: davinci_all_defconfig: Enable some UBI modules
ARM: davinci_all_defconfig: Enable AEMIF as a module
ARM: multi_v7_defconfig: Enable SECCOMP
ARM: exynos_defconfig: Enable SECCOMP
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
ARM: imx_v6_v7_defconfig: Enable GPU support
ARM: s3c2410_defconfig: Remove CONFIG_IPV6_PRIVACY
ARM: exynos_defconfig: Enable PM_DEBUG
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq
ARM: imx_v6_v7_defconfig: enable more USB configurations
ARM: davinci_all_defconfig: enable SMSC ethernet PHY
ARM: davinci_all_defconfig: enable RTC driver as module
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ
...
These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI
methods for SMP booting and we remove support for old bootloader
versions that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which
is a close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework
and removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM
SoC with integrated 802.11ac wireless networking.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y4XF
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"These are updates for platform specific code on 32-bit ARM machines,
essentially anything that can not (yet) be expressed using DT files.
Noteworthy changes include:
- We get support for running in big-endian mode on two platforms:
sunxi (Allwinner) and s3c24xx (old Samsung).
- The recently added Uniphier platform now uses standard PSCI methods
for SMP booting and we remove support for old bootloader versions
that did not support it yet.
- In sunxi, we gain support for the "Nextthing GR8" SoC, which is a
close relative of the Allwinner A13 and R8 chips.
- PXA completes its move over to the generic dmaengine framework and
removes its old private API
- mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC
with integrated 802.11ac wireless networking"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
ARM: imx legacy: pca100: move peripheral initialization to .init_late
ARM: imx legacy: mx27ads: move peripheral initialization to .init_late
ARM: imx legacy: mx21ads: move peripheral initialization to .init_late
ARM: imx legacy: pcm043: move peripheral initialization to .init_late
ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late
ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late
ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late
ARM: imx legacy: vpr200: move peripheral initialization to .init_late
ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late
ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late
ARM: imx legacy: qong: move peripheral initialization to .init_late
ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late
ARM: imx legacy: pcm037: move peripheral initialization to .init_late
ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late
ARM: imx legacy: mx31ads: move peripheral initialization to .init_late
ARM: imx legacy: mx31lite: move peripheral initialization to .init_late
ARM: imx legacy: kzm: move peripheral initialization to .init_late
MAINTAINERS: update list of Oxnas maintainers
ARM: orion5x: remove extraneous NO_IRQ
ARM: orion: simplify orion_ge00_switch_init
...
The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion
of old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files.
If no regressions are found, another large cleanup for the platform
will happen as a follow-up, removing dead code and restructuring
the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT
in principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress.
We can probably merge the remaining code into a single directory
in the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then.
Conflicts: two files deleted here have been modified upstream,
the changes can be discarded.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WaLy
-----END PGP SIGNATURE-----
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion of
old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files. If no regressions are found, another
large cleanup for the platform will happen as a follow-up, removing
dead code and restructuring the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
DT-only. The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT in
principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress. We
can probably merge the remaining code into a single directory in
the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
ARM: imx: (trivial) fix typo and grammar
ARM: clps711x: remove extraneous files
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: realview: imply device tree boot
ARM: realview: no need to select SMP_ON_UP explicitly
ARM: realview: delete the RealView board files
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
ARM: OMAP2+: Drop legacy board file for LDP
...
* pm-cpufreq: (24 commits)
cpufreq: st: add missing \n to end of dev_err message
cpufreq: kirkwood: add missing \n to end of dev_err messages
cpufreq: CPPC: Avoid overflow when calculating desired_perf
cpufreq: ti: Use generic platdev driver
cpufreq: intel_pstate: Add io_boost trace
cpufreq: intel_pstate: Use IOWAIT flag in Atom algorithm
cpufreq: schedutil: Add iowait boosting
cpufreq / sched: SCHED_CPUFREQ_IOWAIT flag to indicate iowait condition
cpufreq: CPPC: Force reporting values in KHz to fix user space interface
cpufreq: create link to policy only for registered CPUs
intel_pstate: constify local structures
cpufreq: dt: Support governor tunables per policy
cpufreq: dt: Update kconfig description
cpufreq: dt: Remove unused code
MAINTAINERS: Add Documentation/cpu-freq/
cpufreq: dt: Add support for r8a7792
cpufreq / sched: ignore SMT when determining max cpu capacity
cpufreq: Drop unnecessary check from cpufreq_policy_alloc()
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
...
The Exynos MIPI driver does not work anymore (it is board file only) so
it is removed. Remove also config options.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This enables CONFIG_EFI for multi_v7_defconfig, which adds support for
booting via EFI, and for the EFI framebuffer as builtin options. It
also enables the EFI rtc, the EFI variable pseudo-filesystem and the
EFI capsule loader as modules.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Drop i.MX1 board files and make i.MX1 a DT only platform.
- Remove obsolete ENET initialization code for TX28 board, since FEC
driver handles those setup well now.
- A couple of cleanups on i.MX31 IOMUX headers to drop duplications
- A few other random and trivial cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1k9/AAoJEFBXWFqHsHzOcXoH/1OqY6dSOI7MrzwocYhXE+mI
eqgQ/5/N3EsaA01NQpdreffGfa1FlNwIwZ6+9XY4EateQt2U/dPKWX0xDkMpo8c+
CNOciiZ4bZ811w+7NfYiEZ0BTIm2ouFuNJLbadPb6tl+0ssUGvEEelH/UbMjT331
DkzMWaqOv6W2ldKT++UF+IrDCGVUI55leqM5WrQDK8qFkBn6KdnYeFG3+4P58hZ3
XhXuv00UJUxB1L1E3TPG+1MVxDD8G5ge4ZXtIxzECgyAbAbQboyNkXai+qcr4dN9
XIleT0YCYtXSEsvEkfWoU3GjZC9pSZmUFhmlWtWmkuFh9H2zAalRZKNVEBNGpQQ=
=qHgE
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/cleanup
Pull "i.MX cleanup for 4.9" from Shawn Guo:
- Drop i.MX1 board files and make i.MX1 a DT only platform.
- Remove obsolete ENET initialization code for TX28 board, since FEC
driver handles those setup well now.
- A couple of cleanups on i.MX31 IOMUX headers to drop duplications
- A few other random and trivial cleanups
* tag 'imx-cleanup-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: (trivial) fix typo and grammar
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=kAKB
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux into next/soc
Pull "This is the pxa changes for v4.9 cycle" from Robert Jarzmik:
This cycle is covering :
- the removal of the legacy DMA API
This is the major contributor to the negative diffstat, as dmaengine
have taken over in this area.
- IDE subsystem defconfig fixes
- preparation for pxa25x to be device-tree compliant
- various irq related fixes
* tag 'pxa-for-4.9' of https://github.com/rjarzmik/linux:
ARM: pxa: pxa_cplds: fix interrupt handling
ARM: pxa: remove irq init from dt machines
ARM: pxa: Use kmalloc_array() in pxa_pm_init()
ARM: pxa: magician: Remove duplicated I2C pins declaration
ARM: pxa: fix GPIO double shifts
arm: trizeps4_defconfig: disable IDE subsystem
arm: pxa255-idp_defconfig: disable IDE subsystem
arm: lpda270_defconfig: disable IDE subsystem
arm: colibri_pxa270_defconfig: disable IDE subsystem
ARM: pxa: add pxa25x device-tree support
ARM: pxa: prepare pxa25x interrupts for device-tree platforms
ARM: pxa: remove platform dma code
ARM: pxa: remove devicetree boards from pxa_defconfig
- Enable i.MX6 SATA and cpufreq driver support in multi_v7_defconfig.
- Enable MPL3115, Etnaviv GPU, WM8960 Codec driver and more USB
functions support in imx_v6_v7_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJX1lztAAoJEFBXWFqHsHzOIdcIALyc4nkJXR1XYYTfL7h+KkgC
YozZ7dX2JyU4n+lYtRz1wLc9SANUu3Of6Ecipk+Y7Djnen0G5Qet6rP5NXzFwmVM
gy5OwctXUaWv7muynLf3SIFyFZ5b+mKwO2n2b/88E5mbSEUXskD/b8lYm/i4XHeJ
Ev3NfAaKo5eDCA39VNsNuD8XkC9wz5CaHbQNCR3hBmHUo9Fjh2eMcloy7/zcbXE9
tVIrZrIzge7l9s5UE1gMYvChQKPE/3tQRhS7NlqFAM4zQfbhQYN1UjibZfoizlMi
jWQxpjZo5VsVOZ1uHPPjdMbjOVHfnUWkSV/l6AAmo4Mnftt83Y3fFxQ+jPHIWgY=
=/Z7R
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Merge "i.MX defconfig updates for 4.9" from Shawn Guo:
- Enable i.MX6 SATA and cpufreq driver support in multi_v7_defconfig.
- Enable MPL3115, Etnaviv GPU, WM8960 Codec driver and more USB
functions support in imx_v6_v7_defconfig.
* tag 'imx-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select the wm8960 codec driver
ARM: imx_v6_v7_defconfig: Add CONFIG_MPL3115
ARM: imx_v6_v7_defconfig: Enable GPU support
ARM: imx_v6_v7_defconfig: enable more USB configurations
ARM: multi_v7_defconfig: Enable ARM_IMX6Q_CPUFREQ
ARM: multi_v7_defconfig: Enable AHCI_IMX
- update dsa config with new symbol
- add flash related config for mvebu v7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlfMQVUACgkQCwYYjhRyO9XsjwCfXdMXmR+QEF+zFB/K/Z5E2BWO
RFYAnRWBOjELgMuH1Q14Sw8ANEj1H5/A
=ZV+v
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.9-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Pull "mvebu defconfig for 4.9 (part 1)" from Gregory CLEMENT:
- update dsa config with new symbol
- add flash related config for mvebu v7
* tag 'mvebu-defconfig-4.9-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: use MV88E6XXX
ARM: mvebu: enable UBI and UBIFS in mvebu_v7_defconfig
ARM: mvebu: enable MTD command line partition table in mvebu_v7_defconfig
Keystone usb phy needs CONFIG_NOP_USB_XCEIV to be enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jzCV
-----END PGP SIGNATURE-----
Merge tag 'keystone_config_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/defconfig
Pull "ARM: config: Add CONFIG_NOP_USB_XCEIV" from Santosh Shilimkar:
Keystone usb phy needs CONFIG_NOP_USB_XCEIV to be enabled.
* tag 'keystone_config_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: defconfig: Fix USB configuration
defconfigs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=So6k
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-schedutil-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into pm-cpufreq-sched
The schedutil cpufreq governor will be switched from tristate to bool. Fix
defconfigs.
* tag 'samsung-defconfig-schedutil-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
generic IIO BMP280 driver instead of the BMP085.
-----BEGIN PGP SIGNATURE-----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=XyS9
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.9/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig updates for v4.9 merge window" from Tony Lindgren:
A patch from Linus Walleij <linus.walleij@linaro.org> to switch to use
generic IIO BMP280 driver instead of the BMP085.
* tag 'omap-for-v4.9/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver
1. Device dynamic frequency and voltage scalling is now supported
on many Exynos boards, enable it.
2. Enable PM_DEBUG, cleanup old IPV6_PRIVACY.
3. Enable SECCOMP for Systemd on Arch.
4. cpufreq schedutil cannot be module anymore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2fYj
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Merge "Samsung defconfig update for v4.9" from Krzysztof Kozlowski:
1. Device dynamic frequency and voltage scalling is now supported
on many Exynos boards, enable it.
2. Enable PM_DEBUG, cleanup old IPV6_PRIVACY.
3. Enable SECCOMP for Systemd on Arch.
4. cpufreq schedutil cannot be module anymore.
* tag 'samsung-defconfig-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Don't attempt to enable schedutil governor as module
ARM: exynos_defconfig: Don't attempt to enable schedutil governor as module
ARM: multi_v7_defconfig: Enable SECCOMP
ARM: exynos_defconfig: Enable SECCOMP
ARM: s3c2410_defconfig: Remove CONFIG_IPV6_PRIVACY
ARM: exynos_defconfig: Enable PM_DEBUG
ARM: exynos_defconfig: Enable bus frequency scaling with devfreq
savedefconfig and enabling various commonly used
drivers as modules.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=APJu
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.9/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Merge "DaVinci defconfig updates for v4.9" from Sekhar Nori:
DaVinci defconfig updates include cleanup using
savedefconfig and enabling various commonly used
drivers as modules.
* tag 'davinci-for-v4.9/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable some UBI modules
ARM: davinci_all_defconfig: Enable AEMIF as a module
ARM: davinci_all_defconfig: enable SMSC ethernet PHY
ARM: davinci_all_defconfig: enable RTC driver as module
ARM: davinci_all_defconfig: enable DA850 audio as modules
ARM: davinci_all_defconfig: cleanup with savedefconfig
The driver is for a trackpad device so is not needed for booting and
makes more sense to have it as module to reduce the kernel image size.
It was probably enabled as built-in because module autoload was not
working when the I2C device was registered by OF but this got fixed
in commit b7d21058b4 ("Input: atmel_mxt_ts - add maxtouch to I2C
table for module autoload") so it's safe to enable as a module now.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Integrators defconfig have changed due to changes in
Kconfig for the CPU types, they use the physmap OF NOR
driver and syscon for LEDs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Select CONFIG_SND_SOC_WM8960 so that we can have audio functional
by default on imx6ul-evk and imx7-sdb boards.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This alters the OMAP2plus defconfig to use the IIO BMP280
driver, which is compatible with the BMP085 instead of the old
BMP085-specific misc driver. The IIO driver nowadays have all
the features of the old driver and more.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This enables UBI+UBIFS to handle the NAND MTDs, including the useful
MTD_UBI_BLOCK.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This enables the use of the memory/ti-aemif.c driver.
ATM most davinci boards use the mach-davinci aemif code which gets in
the way of genericity and proper DT boot.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Add MPL3115 NXP pressure sensor configuration.
This sensor is used by warp7 board.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_DRM_ETNAVIV, so that GPU support can be enabled by default.
Generated by manually selecting CONFIG_DRM_ETNAVIV and
then running:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
,which results in additional cleanup.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Option is long gone, see
5d9efa7ee9 ("ipv6: Remove privacy config option.")
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
PM_DEBUG and PM_ADVANCED_DEBUG bring some information useful for
development and they should not cause any significant overhead. Enable
them in default configuration so debugging would be slightly easier.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
This patch enables the bus frequency scaling driver with devfreq and
devfreq-event framework. Devfreq is already supported on Odroid U3/XU3,
Trats2 and Rinato/Monk boards.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Don't enable symbols already selected, adjust commit msg]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This patch moves SOC_IMX1 into 'Device tree only' category and renames
imx1-dt.c to mach-imx1.c to align with the name schema of other
i.MX DT only platforms.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Synertronixx SCB9328 board is very similar to Armadeus APF9328,
so it can be easily reimplemented in DT way.
This patch removes support for non-DT support for this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts,
so remove the board file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- USB test module
- USB gadget functions using configfs which are just ready within
several release cycles.
- USB audio gadget
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LCDK embeds a LAN8710.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This driver handles the RTC of most davinci SoCs.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This patch disables deprecated IDE subsystem in trizeps4_defconfig
(ide-cs host driver is selected in this config but pata_pcmcia
libata PATA host driver is also selected so ide-cs is redundant
and can be disabled together with the whole IDE subsystem).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in pxa255-idp_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in lpd270_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in colibri_pxa270_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
If both legacy and device-tree machines are mixed in the same defconfig,
the legacy boards don't boot up anymore with gpio request deferral
errors.
This is seen when attempting to run akita, borzoi, spitz, terrier, or
tosa in qemu with pxa_defconfig.
The real reason behind is that gpio handling for pxa in its current
state cannot be built for _both_ a devicetree machine (ie. pxa-dt.c) and
a non devicetree machine (ie. corgi, tosa, ...).
This is turn is because for devicetree a pinctrl is enforced for the
machine, and a pinctrl driver is required. If it's not available,
pxa_gpio_request() fails on pinctrl_request_gpio() and returns
-EPROBE_DEFER. It was introduced by commit f806dac593
("ARM: pxa: activate pinctrl for device-tree machines").
Now the true chicken and egg problem is than machine files,
ie. arch/arm/mach-pxa/xxx.c are using gpio before the drivers are
probed, in the init_machine() function, and that's why pinctrl/gpio for
legacy machine files is a bit difficult.
As for now, to keep the compilation coverage and testing of legacy
machines, this patch removes the 2 devicetree machines from
pxa_defconfig.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
The Wandboard Quad can make use of the cpufreq support provided by the
driver. Enable it and its dependency, REGULATOR_ANATOP, by default.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by
default to make it easy to have the root filesystem on it.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UBIFS is commonly used on Marvell EBU v7 platforms to store the root
file-system, so it makes sense to have those options enabled by default
in mvebu_v7_defconfig.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Marvell EBU v7 platforms contain various MTD devices, therefore it makes
sense to allow configuring the MTD partition tables via the kernel command
line.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Build audio support for DA850-based devices as modules in the default
defconfig.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It's been awhile since a cleanup was done. Regenerate the default settings by
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The patch that this was preparing for made it into neither v4.7 nor
v4.8, so we should back this out as well to avoid the opposite
warning:
arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME
arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME
Sorry for not catching this earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0ef659a300 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME")
Cc: stable@vger.kernel.org # v4.7
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
- Removed Broadcom bcm_defconfig, targets are all covered in multi_v7_defconfig
- New defconfig: multi_v4t_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jRHp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig additions, removals, etc.
Most of these are small changes adding the options for newly
upstreamed drivers, or drivers needed for new board support.
- removed Broadcom bcm_defconfig, targets are all covered in
multi_v7_defconfig
- new defconfig: multi_v4t_defconfig"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
ARM: configs: lpc18xx: enable adc and dac iio drivers
ARM: config: Add a multi_v4t_defconfig
ARM: multi_v7_defconfig: add ACT8945A
ARM: at91/defconfig: Add ACT8945A driver
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: configs: qualcomm: Add MDM9615 missing defconfigs
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
ARM: defconfig: enable the MSM8660 pin controller
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: socfpga: enable PL330 DMA in socfpga_defconfig
ARM: socfpga: add PCIe to socfpga_defconfig
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
...
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8O1H
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap2plus_defconfig fix for v4.8 merge window" from Tony Lindgren:
A defconfig update for omap2plus_defconfig to fix changed USB
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
* tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
Enable ADC and DAC IIO drivers for LPC18xx/43xx SoCs.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CrDC
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.8" from Maxime Ripard:
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
* tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable sun4i DRM driver
ARM: multi_v7: Enable sun4i DRM driver
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=f6TZ
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.8
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
* tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
To allow regression build testing of multi v4t systems, add a
multi_v4t_defconfig, similar to the multi_v5(v7)_defconfig.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9A1f
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig update for v4.8, part 2:
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
* tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcm6FAAoJEFBXWFqHsHzOdFEH/jF1mfZbRBYDjkLsg6H++MJ1
q/Yd8GTahIgIQyjAglBbiF5nLnLD6OK03HPu4M5H7fBo/tS6Og5Tk8LshwXzEucZ
eAC6/5iDRlY1AgdFrdxhXqGwVyG04dgK553PQijCR5GSZ9MMhQO9JFJ49Lf64FuV
TqZ0VPDUO7fw0qlE7yqd1JWy1SHa5LthRxUpx8gJUk+6nqJVQO26Ciga1BP6uSsB
5nprCGpWo00Hfn6hMHqWXCyOm4vaWPq+N2E9aHFdo6VNnAIZxbqvYJ3RpfDu1UfV
PoCoRVaNSfqEIr5yaliMykXI96U8gbLfoWXf/E4K08/Z9uB0gyIqbXCmvHoMhC0=
=EWUm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig update for 4.8:
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
* tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: imx_v6_v7_defconfig: build in usbnet to support NFS for non-ethernet board
Signed-off-by: Olof Johansson <olof@lixom.net>
ACT8945A is the PMIC present on the sama5d2 Xplained.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Include ACT8945A mfd, regulator and power drivers.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
After enabling this I get pins, GPIO, keys and everything on
the MSM8660 surf (APQ8660 DragonBoard).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the PL330 DMA and DMATEST on SoCFPGA.
make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig,
remove it.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Also enable DMATEST as a kernel module
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vr6G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
* tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux:
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom AHCI
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BCM63xx
Signed-off-by: Olof Johansson <olof@lixom.net>
We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the following bits:
CONFIG_TOUCHSCREEN_STMPE
- STMPE touchscreen support, needed on MCVEVK as it contains the
chip. This also enables the STMPE MFD device and touchscreen
input support.
CONFIG_USB_STORAGE
- USB storage support is often used, so enable it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Newer Keystone 2 devices utilize pinmuxing. Enable PINCTRL SINGLE
which is used to handle pinmuxing.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.
Currently the s5p-secss driver supports AES in CBC and ECB modes.
However its usefulness could be doubted. Excerpt of tests on Odroid XU3
(Exynos5422), for 256 bit key, encryption, performance CPU freq governor:
algorithm | block size [b] | average speed [MB/s] |
cbc-aes-s5p | 16 | 11.5 |
cbc-aes-s5p | 64 | 25.4 |
cbc-aes-s5p | 256 | 41.0 |
cbc-aes-s5p | 1024 | 47.4 |
cbc-aes-s5p | 8192 | 49.0 |
cbc(aes-generic) | 16 | 0.4 |
cbc(aes-generic) | 64 | 1.8 |
cbc(aes-generic) | 256 | 6.6 |
cbc(aes-generic) | 1024 | 25.2 |
cbc(aes-generic) | 8192 | 83.1 |
Anyway enable the driver so it will get some testing coverage by
community.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
The Exynos4412-based Trats2 board has CM36651 proximity/ambient light
sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC.
Enable them in defconfig to get some testing coverage and use its
features.
While saving defconfig the SND_SOC_ODROIDX2 is removed because it does
not exist since commit ee12a817bb ("ASoC: samsung: Remove unused
Odroid x2/u3 machine driver").
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXS9roAAoJEME3ZuaGi4PXtOEP/RiDgd2W4lZRHoLQHOTrzVC2
fGpSNwBPFTyemJe9+5Qm6XjqPGITn+TbiLl7QZmYu0cxympcXKVNyePiC3poP/oK
f7yw5sfimBACba5/PvqbiqtSl4xCymBuRlhraZ4vOaRAkUPvKW8cFazudYKNLemi
A2as/2MifWZRRUCHlaVnGVRMYZ33MZ/MWqgRTbb5ofJw54Vo9WNPgj+8dVWiM42V
nHULYwTLAedYnlyBFQGuwcY1oJJMVdwC7SKVs2RTLYGSpBhQ9DPTMaLr2lJiSVLU
eWbdrWRZu4+lVLbtnqmuJBNdlIFuN+cvzmqkYbCFSiJKyYbmZpksn/YF1hAOmchq
DZwbMdaJxnoCrObDkGq6p52GjZVX0PdFgZklV34Eo577JzKO8+hLTinFSFwYkGEz
7s2W13WyO95ldMAXoaBqI12UU5U8Blpg6YZ92c5jzS4waATxuPAcYmLnAGRabiul
RCNrvAe6V04T5voEleCB8KVcyMVc/QeVbgpGAjwcQ0wBR+HsTUarZXMk3U6Q+u5m
LEcgWck9nfdzaP5EEI+90xFPTfGr3xvPXgkFfcp7yx8NmNaqqSYw6kJncHBQC1LW
eCdWNkSa5DeISR2xmaHY4g9qET+PahruoS2D5eJ4/ZiRzKYtuSe6fwKoFsJ+iQr+
KUMP9GXMOyRo0c172e0F
=LR9t
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Two fixes for v4.7 cycle for build issues:
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
* tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: don't select keyboard driver
ARM: samsung: improve static dma_mask definition
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The driver can be built as a module, so use this possibility.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed.
Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
that are for Samsung SoCs but are not being built with exynos_defconfig.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed. The S5P MFC driver wasn't enabled since it fails to probe.
Only the boolean Kconfig symbols are enabled as built-in, since drivers
are not critical and also to keep the kernel binary image size as small
as possible.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer and there are separate options to select Mixer
and HDMI.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable the new DRM driver in the sunxi default configuration
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the new DRM driver in the multi_v7 defconfig
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Disable big.LITTLE switcher in order to allow automatic usage of
cpufreq-dt driver on Exynos542x/Exynos5800 SoCs based boards.
This change should not cause any problems as arm_big_little[_dt]
driver (which is using big.LITTLE switcher support to do the "real"
big.LITTLE switching work) is not used on any Exynos SoC based
board currently.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol
that got renamed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ecJp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol that
got renamed"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
ARM: u8500_defconfig: update sensor config
ARM: u8500_defconfig: remove staging from defconfig
ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
ARM: at91: sama5: Update defconfig
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
ARM: multi_v7_defconfig: add Atmel watchdog timers
ARM: multi_v7_defconfig: add HLCDC drivers as modules
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
...
The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?),
but this fails if CONFIG_INPUT is a loadable module:
drivers/input/built-in.o: In function `samsung_keypad_remove':
drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device'
drivers/input/built-in.o: In function `samsung_keypad_irq':
drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_irq':
include/linux/input.h:389: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_probe':
drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device'
drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability'
This removes the 'select' as suggested by Krzysztof Kozlowski and
instead enables the driver from the defconfig files.
The problem does not happen on mainline kernels, as we don't normally
build built-in input drivers when CONFIG_INPUT=m, but I am experimenting
with a patch to change this, and the samsung keypad driver showed up
as one example that was silently broken before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.org/lkml/2016/2/14/55
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes
the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files,
while we add two new defconfig files with d0bc3483da ("arm/configs:
Add Aspeed defconfig"), with the old type.
This changes the two new defconfig files to match the other ones.
As a result, we get harmless warnings for the arm-soc defconfig
branch by itself, but everything will work when 4.7-rc1 is out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tb2f
-----END PGP SIGNATURE-----
Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into next/defconfig
Merge "aspeed defconfig for 4.7" from Joel Stanley:
This adds configurations used for testing Aspeed BMC SoCs, as well as adding
the v5 part to the multi defconfig.
* tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux:
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
The Ux500 is using buffered IIO as the sensors support
IRQs. The BH1780 ambient light sensor was added to IIO,
so disable the old misc driver and activate the driver
in IIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ux500 was enabling the staging drivers due to the RMI4
touchscreen driver, this is now properly upstream, so drop
this and the dead symbol for the old RMI4 hack from
the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge "i.MX defconfig updates for 4.7" from Shawn Guo:
- Update multi_v5_defconfig for i.MX21/27 and systemd support
- Update imx_v6_v7_defconfig to support devices found on various i.MX6
board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC
* tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v5_defconfig: Enable recommended options for systemd
ARM: multi_v5_defconfig: Enable support for MX21/MX27
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding:
Enable the XUSB pad controller and XUSB controller drivers on the Tegra
and multi-v7 default configurations.
* tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
based filesystems, SPI NOR and GPIO sysfs
entries.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=ocYZ
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori:
Some defconfig updates to support systemd
based filesystems, SPI NOR and GPIO sysfs
entries.
* tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable SPI and NOR as modules
ARM: davinci_all_defconfig: support systemd
ARM: davinci_all_defconfig: enable GPIO_SYSFS
CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So
explicitly enable it to allow easy use of systemd userspace.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Now that all drivers support the same set of functions and the same
setup code, drop every model-specific DSA switch driver and replace them
with a common mv88e6xxx driver.
This merges the info tables into one, removes the function exports, the
model-specific files, and update the defconfigs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the Aspeed ast2400 BMC SoC to the build.
The SoC has six UARTs so we need to enable the appropriate options for
SERIAL_8250
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable CGROUPS support, so we can boot userspace that uses systemd on
top of kernel configured using this defconfig. The systemd userspace
depends on cgroups and without them, it dies in mysterious ways.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the multi_v7 default configuration.
The XUSB pad controller is built-in because it is needed by PCIe, which
in turn provides the onboard ethernet used for network boot on a Jetson
TK1.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lX8d
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren:
Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.
* tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
ARM: omap2plus_defconfig: Update with make savedefconfig
ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support
ARM: omap2plus_defconfig: Enable DP83867 support
ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=yp6h
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/defconfig
Merge "NXP LPC32xx defconfig updates for v4.7" from Vladimir Zapolskiy:
This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.
* tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
ARM: LPC32xx: add PL175 memory controller driver to defconfig
ARM: LPC32xx: defconfig update
Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver
as a module. It's used by sama5d2 SoC for instance.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add both Atmel watchdog timers to the multi_v7_defconfig. They are added
as part of the kernel because it's a core piece of the system.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add the HLCDC drivers to multi_v7_defconfig.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add the LCD DRM driver with all its dependencies:
- the MFD driver
- the backlight PWM
- the simple panel driver
Remove the CONFIG_FB as it is not needed on any sama5 device.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Selection of the HDMAC option is now needed to allow some sama5 devices
to have the DMA driver compiled and available.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Commit 648af7fca1 ("rxrpc: Absorb the rxkad security module") changed
the RXKAD Kconfig symbol from tristate to boolean but the commit didn't
update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module.
This leads to the following warning when using the omap2plus_defconfig:
arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HTRw
-----END PGP SIGNATURE-----
Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman:
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
* tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
PCI: rcar-pcie: Remove Gen2 designation from Kconfig
This patch adds a new config for MPS2 platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
Power Management support, switching sdhci-bcm2835 for sdhci-iproc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QxkI
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Merge "This pull request contains defconfig changes for Broadcom ARM-based SoCs"
from Florian Fainelli:
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
Power Management support, switching sdhci-bcm2835 for sdhci-iproc
* tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835: Enable NFS root support.
ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
ARM: bcm2835: Enable CONFIG_PM.
ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
ARM: multi_v7_defconfig: Build in DWC2 USB support
ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
ARM: multi_v7_defconfig: Add more BCM2835 support
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcPzQsACgkQCwYYjhRyO9UpUwCghNZsWe0jSWCZyVbmLS4qCGT/
X3oAn1wc1CeLHFDroMVcCw3aBaTLofUP
=LxX6
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "mvebu defconfig for 4.7 (part 1)" from Gregory CLEMENT
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers
* tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver
ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
MAINTAINERS: attach arch/arm/configs/mvebu_*_defconfig to relevant maintainers
ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
This NAND controller device is used on UniPhier SoCs (and I know
it is also used on SoC FPGA).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable SPI driver and SPI NOR flash support as modules.
Tested with SPI NOR flash on DA850-EVM. Basic boot test only to confirm
NOR flash device detection.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.
While at it, remove stale entry CONFIG_INOTIFY=y
[1] https://github.com/systemd/systemd/blob/master/README#L37
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.
Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:
CONFIG_BINFMT_AOUT=y -- not needed, legacy
CONFIG_FPE_NWFPE=y -- not needed, AEABI build
CONFIG_IPV6_PRIVACY=y -- removed build option
CONFIG_IPV6=y -- selected by default
CONFIG_MII=y -- not needed, board phys don't select library
CONFIG_MTD_CHAR=y -- removed build option
CONFIG_MTD_M25P80=y -- not needed, AT25 EEPROM driver is in use
CONFIG_USB_PHY=y -- selected by default
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This enables the new driver for Marvell CESA crypto engines on all mvebu v5.
The old driver is no longer used, but it is still in the tree for fallback.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the new driver for Marvell CESA crypto engines on all ARMv7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the new driver for Marvell CESA crypto engines on all mvebu v7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-----------
- Enable ST's HW Random number generator in multi_v7 defconfig
- Enable PWM regulator support in multi_v7 defconfig
- Enable ST's Power and Reset driver in multi_v7 defconfig
- Enable ST's PWM in multi_v7 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OJtH
-----END PGP SIGNATURE-----
Merge tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig
Highlights:
-----------
- Enable ST's HW Random number generator in multi_v7 defconfig
- Enable PWM regulator support in multi_v7 defconfig
- Enable ST's Power and Reset driver in multi_v7 defconfig
- Enable ST's PWM in multi_v7 defconfig
* tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: multi_v7_defconfig: Enable ST's HW Random Number Generator
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's Power Reset driver
ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Three types of display controller-drivers where added recently. The
Analogix Displayport variant and Designware MIPI DSI used for example
on the rk3288 as well as the Innosilicon HDMI controller used on the
rk3036.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The displayport phy controls the output of the Analogix displayport
controller on Rockchip SoCs and is therefore one component to enable
veyron devices to use their internal display.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
MDIO Bus/PHY emulation with fixed speed/link PHYs will be used in
Baltos iR5221 devices to connect to ICPlus IP175D switch IC.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable DP83867 Ethernet phy for supporting networking on DRA72-EVM rev C
(SR2.0).
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the TI TPIC2810 8-Bit LED Driver with I2C Interface. This is used
in AM335x ICEv2 Boards.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the config options needed to get CPU hotplug functional.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by
systemd (which also matches the multi_v7 defconfig). Also enable IPV6,
which defaults to 'y' by now.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently only the ondemand and performance CPUFreq policy governors are
enabled in multi_v7 defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.
The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Currently only the ondemand and performance CPUFreq policy governors are
enabled in the Exynos defconfig. But the other governors are also useful
for some cases, enable them to allow users change the default if needed.
The options are enabled as module to keep the kernel image size minimal.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Exynos4412-based Trats2 board has Asahi Kasei AK 3-Axis
Magnetometer, CM36651 proximity/ambient light sensor, MMS114 touchscreen
and Wolfson Microelectronics WM1811 CODEC. Enable them in defconfig to
get some testing coverage and use its features.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Although the SoC support was already enabled, the drivers and machines
were missing.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The rv4168 RTC is used by the following platforms:
- Nitrogen6_MAX (both Quad and Quad Plus versions)
- Nitrogen7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I2C muxing is used on Nitrogen6_MAX board from Boundary Devices.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Those two touch controllers are used by Boundary Devices platforms.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is also present in multi_v7_defconfig, and means that I can test
the pi1 with the 2835 defconfig in my normal environment.
Signed-off-by: Eric Anholt <eric@anholt.net>
Combined with the queued DT changes, we now get HDMI and 3D support.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The power domain driver we've enabled doesn't actually do anything
without it, and we need it to do its job for VC4 to initialize
successfully.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
performance appears to be unaffected.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
This allows the Raspberry Pi 2 to be network booted from the
defconfig.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
This approximately triples write performance for the SD card. My card
is too full of important data to collect very reliable numbers, but I
see 271.361% +/- 166.742% improvement (n=3 before, 6 after), for 'dd
if=/dev/zero of=/boot/asdf bs=1M count=3 oflag=dsync,direct'. Read
performance appears to be unaffected.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The WDT is required for reboot and I2S is used for audio devices on
the P5 header (or BT audio on the Pi3).
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
The Ux500 boards may have an RMI4 unit, and the DT fragments for
them have been merged upstream. Add it to the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Lager board shall be the reference platform for the runtime I2C IP
core switcher and for I2C slave support. Enable the needed drivers for
this.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas Lager board shall be a reference platform for the runtime
I2C IP core switcher and for I2C slave support. Enable the needed
drivers for this.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
The realview_smp_defconfig and realview_defconfig got merged into one,
so we are now down to 110 files.
For stm32, we have now added a Kconfig fragment, the first such
file on arch/arm. The purpose here is to have a shared defconfig
file that works for all boards, while the DRAM offset has to be
hardwired on NOMMU machines at compile time.
The Exynos defconfig changes depend on changes in the RTC tree,
so this is pulled in here, but has already been merged into 4.6 now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=d4mQ
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
The realview_smp_defconfig and realview_defconfig got merged into one,
so we are now down to 110 files.
For stm32, we have now added a Kconfig fragment, the first such file
on arch/arm. The purpose here is to have a shared defconfig file that
works for all boards, while the DRAM offset has to be hardwired on
NOMMU machines at compile time.
The Exynos defconfig changes depend on changes in the RTC tree, so
this is pulled in here, but has already been merged into 4.6 now"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits)
ARM: imx_v4_v5_defconfig: Enable initramfs support
ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
ARM: multi_v7_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable LP872x regulator support
ARM: mxs_defconfig: Enable initramfs support
ARM: mxs_defconfig: Cleanup mxs_defconfig
ARM: multi_v5_defconfig: Enable initramfs support
ARM: multi_v5_defconfig: Cleanup multi_v5_defconfig
ARM: multi_v7_defconfig: enable useful configurations for Vybrid
ARM: multi_v7_defconfig: add MACH_ARTPEC6
ARM: omap2plus_defconfig: Enable AT24 eeprom
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
ARM: omap2plus_defconfig: Enable ISP support and dependencies
ARM: omap2plus_defconfig: Enable OMAP IOMMU support
ARM: socfpga_defconfig: enable support for initramfs/initrd support
ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
ARM: multi_v7_defconfig: Enable BCM283x
ARM: bcm2835_defconfig: Enable RPi power domain driver
ARM: bcm2835_defconfig: Enable RPi firmware driver
ARM: bcm2835_defconfig: enable ARMv7 support
...
Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added
- Allwinner A64 SoC
- Annapurna Labs Alpine SoCs
- Broadcom Vulcan
- Marvell Armada 3700 SoCs
- Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fO+Q
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit changes from Arnd Bergmann:
"Here's our branch of ARM64 contents for this merge window, now
containing all ARM64 changes other than device tree files.
- Various new platforms get added:
* Allwinner A64 SoC
* Annapurna Labs Alpine SoCs
* Broadcom Vulcan
* Marvell Armada 3700 SoCs
* Amlogic S905
- Various defconfig changes to enable platform specific drivers
This branch includes the clk git tree to resolve a build-time
dependency"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
arm64: defconfig: Increase MMC_BLOCK_MINORS to 16
arm64: defconfig: Add Qualcomm sdhci and restart functionality
ARM64: Enable Amlogic Meson GXBaby platform
arm64: defconfig: Enable Samsung MFD and related configs
arm64: alpine: select the Alpine MSI controller driver
arm64: defconfig: enable the Alpine family
arm64: add Alpine SoC family
arm64: defconfig: Enable exynos thermal config
arm64: add defconfig options for Allwinner SoCs
arm64: defconfig: Enable DesignWare APB GPIO controller
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS
clk: samsung: Don't build ARMv8 clock drivers on ARMv7
MAINTAINERS: Add entry for Broadcom Vulcan SoC
arm64: cputype info for Broadcom Vulcan
arm64: Broadcom Vulcan support
arm64: defconfig: Add Broadcom Vulcan to defconfig
arm64: update ARCH_MVEBU for Marvell Armada 7K/8K support
Documentation: arm: add Marvell Armada 7K and 8K families
Documentation: arm: add link to Armada 38x Functional Spec
...
Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP, uniphier
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ynNj
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Newly added support for additional SoCs:
- Axis Artpec-6 SoC family
- Allwinner A83T SoC
- Mediatek MT7623
- NXP i.MX6QP SoC
- ST Microelectronics stm32f469 microcontroller
New features:
- SMP support for Mediatek mt2701
- Big-endian support for NXP i.MX
- DaVinci now uses the new DMA engine dma_slave_map
- OMAP now uses the new DMA engine dma_slave_map
- earlyprintk support for palmchip uart on mach-tango
- delay timer support for orion
Other:
- Exynos PMU driver moved out to drivers/soc/
- Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
uniphier"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
ARM: uniphier: rework SMP code to support new System Bus binding
ARM: uniphier: add missing of_node_put()
ARM: at91: avoid defining CONFIG_* symbols in source code
ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
ARM: imx: Make reset_control_ops const
ARM: imx: Do L2 errata only if the L2 cache isn't enabled
ARM: imx: select ARM_CPU_SUSPEND only for imx6
dmaengine: pxa_dma: fix the maximum requestor line
ARM: alpine: select the Alpine MSI controller driver
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
ARM: s3c24xx: Avoid warning for inb/outb
ARM: zynq: Move early printk virtual address to vmalloc area
ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
ARM: SAMSUNG: Remove unused register offset definition
ARM: EXYNOS: Cleanup header files inclusion
drivers: soc: samsung: Enable COMPILE_TEST
MAINTAINERS: Add maintainers entry for drivers/soc/samsung
...
As usual, we queue up a few fixes that don't seem urgent enough to go in
through -rc.
- a number of randconfig warning fixes from Arnd
- various small fixes for OMAP
- one somewhat larger patch to restore the OMAP3 cpuidle
tuning that was lost in a cleanup
- a small regression fix for cns3xxx PCI
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YJmM
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-urgent fixes from Arnd Bergmann:
"As usual, we queue up a few fixes that don't seem urgent enough to go
in through -rc.
- a number of randconfig warning fixes from Arnd
- various small fixes for OMAP
- one somewhat larger patch to restore the OMAP3 cpuidle tuning that
was lost in a cleanup
- a small regression fix for cns3xxx PCI"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
CNS3xxx: Fix PCI cns3xxx_write_config()
MAINTAINERS: unify email addrs for Kevin Hilman
CNS3xxx: remove unused *_VIRT definitions
ARM: OMAP2+: Fix hwmod clock for l4_ls
soc: TI knav_qmss: fix dma_addr_t printing
ARM: prima2: always enable reset controller
ARM: socfpga: hide unused functions
ARM: ux500: fix ureachable iounmap()
ARM: ks8695: fix __initdata annotation
ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused
ARM: mv78xx0: avoid unused function warning
ARM: orion: only select I2C_BOARDINFO when using I2C
ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
ARM: OMAP3: Add cpuidle parameters table for omap3430
ARM: davinci: make I2C support optional
ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
ARM: davinci: avoid unused mityomapl138_pn_info variable
ARM: davinci: limit DT support to DA850
ARM: DRA7: hwmod: Add reset data for PCIe
ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
...
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
Pull security layer updates from James Morris:
"There are a bunch of fixes to the TPM, IMA, and Keys code, with minor
fixes scattered across the subsystem.
IMA now requires signed policy, and that policy is also now measured
and appraised"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (67 commits)
X.509: Make algo identifiers text instead of enum
akcipher: Move the RSA DER encoding check to the crypto layer
crypto: Add hash param to pkcs1pad
sign-file: fix build with CMS support disabled
MAINTAINERS: update tpmdd urls
MODSIGN: linux/string.h should be #included to get memcpy()
certs: Fix misaligned data in extra certificate list
X.509: Handle midnight alternative notation in GeneralizedTime
X.509: Support leap seconds
Handle ISO 8601 leap seconds and encodings of midnight in mktime64()
X.509: Fix leap year handling again
PKCS#7: fix unitialized boolean 'want'
firmware: change kernel read fail to dev_dbg()
KEYS: Use the symbol value for list size, updated by scripts/insert-sys-cert
KEYS: Reserve an extra certificate symbol for inserting without recompiling
modsign: hide openssl output in silent builds
tpm_tis: fix build warning with tpm_tis_resume
ima: require signed IMA policy
ima: measure and appraise the IMA policy itself
ima: load policy using path
...
All the drivers support multiple chips, but mv88e6123_61_65 is the
only one that reflects this in its naming. Change it to be consistent
with the other drivers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----------
- Enable GPIO led driver in stm32_defconfig
- Introduce a config fragment to override RAM base address
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dBNt
-----END PGP SIGNATURE-----
Merge tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/defconfig
Merge "STM32 defconfig updates for v4.6 #1" from Maxime Coquelin:
Highlights:
-----------
- Enable GPIO led driver in stm32_defconfig
- Introduce a config fragment to override RAM base address
* tag 'stm32-defconfig-for-v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32:
ARM: configs: Add new config fragment to change RAM start point
ARM: config: Enable GPIO Led driver in stm32_defconfig
for v4.6 merge window:
- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
decoder
- Enable at24 eeprom for revision detection on beagle-x15
- Enable LP872x regulator for both omap2plus_defconfig and
multi_v7_defconfig as it's needed at least by LG Optimus
Black
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JVC1
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap defconfig changes for v4.6 merge window" from Tony Lindgren:
Defconfig changes for omap2plus_defconfig and multi_v7_defconfig
for v4.6 merge window:
- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
decoder
- Enable at24 eeprom for revision detection on beagle-x15
- Enable LP872x regulator for both omap2plus_defconfig and
multi_v7_defconfig as it's needed at least by LG Optimus
Black
* tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable LP872x regulator support
ARM: omap2plus_defconfig: Enable AT24 eeprom
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
ARM: omap2plus_defconfig: Enable ISP support and dependencies
ARM: omap2plus_defconfig: Enable OMAP IOMMU support
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T9z9
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski:
1. We want thermal for Exynos7 TMU unit to monitor the temperature.
2. Enable the drivers for PMIC used on Exynos7-based Espresso board.
* tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung MFD and related configs
arm64: defconfig: Enable exynos thermal config
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Regenerate imx_v4_v5_defconfig by running:
make imx_v4_v5_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/imx_v4_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lBYC
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux into next/soc
Merge "pxa changes for v4.6 cycle" from Robert Jarzmik:
This is a minor cycle with :
- cleanup fixes from Arnd, mainly build oriented and sparse type ones
- dma fixes for requestors above 32 (impacting mainly camera driver)
- some minor cleanup on pxa3xx device-tree side
* tag 'pxa-for-4.6' of https://github.com/rjarzmik/linux:
dmaengine: pxa_dma: fix the maximum requestor line
ARM: pxa: add the number of DMA requestor lines
dmaengine: mmp-pdma: add number of requestors
dma: mmp_pdma: Add the #dma-requests DT property documentation
ARM: pxa: pxa3xx device-tree support cleanup
ARM: pxa: don't select RFKILL if CONFIG_NET is disabled
ARM: pxa: fix building without IWMMXT
ARM: pxa: move extern declarations to pm.h
ARM: pxa: always select one of the two CPU types
ARM: pxa: don't select GPIO_SYSFS for MIOA701
ARM: pxa: mark unused eseries code as __maybe_unused
ARM: pxa: mark spitz_card_pwr_ctrl as __maybe_unused
ARM: pxa: define clock registers as __iomem
A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
most notably the USB OTG that is finally enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6Cse
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.6" from Maxime Ripard:
A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
most notably the USB OTG that is finally enabled.
* tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue
ARM: multi_v7_defconfig: Enable A10 audio codec driver as module
ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue
ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used
ARM: sunxi_defconfig: Enable A10 audio codec driver
ARM: sunxi_defconfig: Enable sunxi IR driver
enable SRAM support in mvebu_v7_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlbQXRoACgkQCwYYjhRyO9XuDwCggDihNDvg28PdaATDslAWggt0
uJoAoIZioUyUwXZ2a0artKxtvxgBXme0
=+WFN
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "mvebu defconfig for 4.6 (part 2)" from Gregory CLEMENT:
enable SRAM support in mvebu_v7_defconfig
* tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: enable SRAM support in mvebu_v7_defconfig
The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Regenerate mxs_defconfig by running:
make mxs_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/mxs_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Merge "Broadcom defconfig changes for 4.6" from Florian Fainelli:
This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Daniel enables all that is required to get the BCM283x (Raspberry Pi and
Raspberry Pi 2) SoCs to boot with multi_v7_defconfig
- Stefan enables the Raspberry Pi firmware driver and power domain drivers
in bcm2835_defconfig
- Stephen refreshes the bcm2835_defconfig, disables DEBUG_LL, and turns on
ARMv7 support which is needed for BCM2836 (Raspberry Pi 2)
* tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable BCM283x
ARM: bcm2835_defconfig: Enable RPi power domain driver
ARM: bcm2835_defconfig: Enable RPi firmware driver
ARM: bcm2835_defconfig: enable ARMv7 support
ARM: bcm2835_defconfig: disable DEBUG_LL
ARM: bcm2835_defconfig: rebuild on next-20160205
This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Regenerate multi_v5_defconfig by running:
make multi_v5_defconfig
make savedefconfig
mv defconfig arch/arm/configs/multi_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Enable initrd/initramfs support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sOpf
-----END PGP SIGNATURE-----
Merge tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig
SoCFPGA defconfig update for v4.6
-Enable initrd/initramfs support
* tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga_defconfig: enable support for initramfs/initrd support
Signed-off-by: Olof Johansson <olof@lixom.net>
- Addition of sama5d2 ADC to sama5_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8vI6
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig
defconfig update for 4.6:
- Addition of sama5d2 ADC to sama5_defconfig
* tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
1. exynos defconfig:
a. Enable NEON and accelerated crypto,
b. Enable s5p-secss driver (Security SubSystem block for accelerating
some cryptographic operations),
2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
was combined into existing rtc-max77686 driver. This depends on changes
from RTC tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=SU+0
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.6:
1. exynos defconfig:
a. Enable NEON and accelerated crypto,
b. Enable s5p-secss driver (Security SubSystem block for accelerating
some cryptographic operations),
2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
was combined into existing rtc-max77686 driver. This depends on changes
from RTC tree.
* tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
rtc: max77686: Cleanup and reduce dmesg output
rtc: Remove Maxim 77802 driver
rtc: max77686: Properly handle regmap_irq_get_virq() error code
rtc: max77686: Fix unsupported year message
rtc: max77686: Add max77802 support
rtc: max77686: Add an indirection level to access RTC registers
rtc: max77686: Use a driver data struct instead hard-coded values
rtc: max77686: Use usleep_range() instead of msleep()
rtc: max77686: Use ARRAY_SIZE() instead of current array length
rtc: max77686: Fix max77686_rtc_read_alarm() return value
ARM: exynos_defconfig: Enable s5p-secss driver
ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Olof Johansson <olof@lixom.net>
so we only need one defconfig for RealView, then adds
USB mass storage configuration.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tRLy
-----END PGP SIGNATURE-----
Merge tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig
This makes the RealView defconfig select SMP on UP
so we only need one defconfig for RealView, then adds
USB mass storage configuration.
* tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: realview: enable USB storage in the defconfig
ARM: realview: delete realview-smp_defconfig
ARM: realview: activate SMP on the default defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
AT24 compatible eeproms are used in BB family and X15 boards.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3
ISP so enable support for its driver as a module to be able to test it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate
camera images processing. The ISP driver implements V4L2, Media Controller
and V4L2 sub-dev interfaces so enable support for the driver and all these
dependencies to allow video capture to be tested using this HW IP block.
Also, disable the I2C ancillary drivers auto-select option since the media
driver does not auto-select the ancillary devices that are attached to the
bridge because this depends on what's present in the supported OMAP boards.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so
enable it to be able to test the OMAP3 Image Signal Processor (ISP).
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the BCM2835/BCM2836 options required to boot Raspberry Pi.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
After enabling the Raspberry Pi firmware driver which allow us to handle
power domains for USB or graphics.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This enables the Raspberry Pi driver for GPU specific features.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This way the kernel works on both RPi0/1 and RPi2 even with earlyprintk
in the kernel cmdline; the two hardware platforms use different physical
addresses for peripherals, so the same DEBUG_LL configuration won't work
on both. If someone needs DEBUG_LL support, they can enable it locally.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
This separates explicit changes desired in later patches from "automatic"
or irrelevant changes caused solely by Kconfig changes.
make ARCH=arm bcm2835_defconfig
make ARCH=arm savedefconfig
mv defconfig arch/arm/configs/bcm2835_defconfig
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Rather than duplicate a defconfig for each difference
between platforms, we can choose to pick a basic defconfig and
manipulate it at run-time using config fragments. Here we're
adding a new fragment to over-ride the RAM start point to 0x0.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
SRAM support is needed for the hardware buffer management used by the
mvneta driver.
[gregory.clement@free-electrons.com: add commit log]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.
Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.
Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select the sahara crypto driver that is used on i.MX53.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* fix omap2plus_defconfig to enable omapfb as it was in v4.4
* ocfb: fix timings for margins
* s6e8ax0, da8xx-fb: fix compile warnings
* mmp: fix build failure caused by bad printk parameters
* imxfb: fix clock issue which kept the display off
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWvb3dAAoJEPo9qoy8lh71UREP/39iw5a2pvZtKC4tbeIWGntJ
+wP0Hp6hCxAVh8S+SsSEF2i2oZzs4/ZYgRFoGGKK3j2CcizRxG9WMvaqbb3C8s4r
3aoj02oDyw/kpui+0O+eSUpLvc75c1nrVh31SrLK5zhx0fg59UEJZYlO/VkLTKTJ
mN22y0VUtffx61plAs/e9EU3x6+Y3UEhDd6nuxJ+J5e9ruzjNDE5IVzyPjpP+kvA
2ry/cjvmDKTqw2jJGYJ7CbBuAtCXz7BgT5XXKAeNLPFqewF5CN2Jck2k9Ix7M1Tv
rAcLLEl9vrUIO5Ss3BI0VK4IXa0CYPQkPxsdVFvf26QaDXDGTdOkOAkZGMAi6jXZ
SulDABha5VThbJUQSskBUoMF6f2l2A3MX6Gr5cNJazPagMBYCNG++HoLA17cEnH9
a3+ujaGgdhBJqCYrJ7Wjif1wL77eHvby4xYdxdyssTVbd3MWcRqK1Nws8YBn4bw9
jE8TOy4RAYqA/LA7QjXCel4sI6cbYejJfz1/mH31MgjWC96tRBr0NhkT7W5zQvll
toycESYP6STwKTDfuntfo0PUwMOOxhZwVzSQD5Ov2cQvl3eEKWR1WRZLIOwWtz5/
L4HkpCAQzIPNDOpnV7nS/jdTwwoV3bKjYluHHIeByvLrFaOQuKy/zO69pj7vUtpU
2XgQJcu6UHLYDAwDFCuV
=kfw6
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- fix omap2plus_defconfig to enable omapfb as it was in v4.4
- ocfb: fix timings for margins
- s6e8ax0, da8xx-fb: fix compile warnings
- mmp: fix build failure caused by bad printk parameters
- imxfb: fix clock issue which kept the display off
* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
video: fbdev: imxfb: Provide a reset mechanism
fbdev: mmp: print IRQ resource using %pR format string
fbdev: da8xx-fb: remove incorrect type cast
fbdev: s6e8ax0: avoid unused function warnings
ocfb: fix tgdel and tvdel timing parameters
ARM: omap2plus_defconfig: update display configs
CONFIG_KEYS_DEBUG_PROC_KEYS is no longer an option as /proc/keys is now
mandatory if the keyrings facility is enabled (it's used by libkeyutils in
userspace).
The defconfig references were removed with:
perl -p -i -e 's/CONFIG_KEYS_DEBUG_PROC_KEYS=y\n//' \
`git grep -l CONFIG_KEYS_DEBUG_PROC_KEYS=y`
and the integrity Kconfig fixed by hand.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Andreas Ziegler <andreas.ziegler@fau.de>
cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role
controller for USB OTG.
Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode. This requires the
NOP USB transceiver driver, which is also enabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
It is not uncommon to boot a root filesystem from a USB
pendrive and similar, so enable USB mass storage, backed
by SCSI and SD block devices in the RealView defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The realview has two defconfigs: realview_defconfig and
realview-smp_defconfig. We now have working SMP_ON_UP so
make them equal so we can delete the -smp variant. For
some reason NO_HZ_FULL was missing from the plain
realview_defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The A10 audio codec driver supports the on-chip audio codec found on
Allwinner A10, A10s, A13, A20 SoCs.
Build it as a module, since it is not critical.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Allwinner SoCs typically have a Mentor Graphics Inventra MUSB high speed
dual role controller for USB OTG.
Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode.
This patch only enables the driver core and Allwinner platform support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sunxi_defconfig already enables INPUT_AXP20X_PEK, but the device is not
exposed to userspace. Enable INPUT_EVDEV so it is.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A consumer IR receiver is commonly found on Allwinner SoC based
development boards and set top boxes. The driver has been available
for some time. Enable it by default.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard