Commit Graph

14 Commits

Author SHA1 Message Date
Keith Busch bdb5ac8577 PCI/ERR: Handle fatal error recovery
We don't need to be paranoid about the topology changing while handling an
error.  If the device has changed in a hotplug capable slot, we can rely on
the presence detection handling to react to a changing topology.

Restore the fatal error handling behavior that existed before merging DPC
with AER with 7e9084b367 ("PCI/AER: Handle ERR_FATAL with removal and
re-enumeration of devices").

Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-26 14:23:14 -05:00
Keith Busch c4eed62a21 PCI/ERR: Use slot reset if available
The secondary bus reset may have link side effects that a hotplug capable
port may incorrectly react to.  Use the slot specific reset for hotplug
ports, fixing the undesirable link down-up handling during error
recovering.

Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: fold in
https://lore.kernel.org/linux-pci/20180926152326.14821-1-keith.busch@intel.com
for issue reported by Stephen Rothwell <sfr@canb.auug.org.au>]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sinan Kaya <okaya@kernel.org>
2018-09-21 12:18:10 -05:00
Lukas Wunner a50ac6bfd6 PCI: Simplify disconnected marking
Commit 89ee9f7680 ("PCI: Add device disconnected state") iterates over
the devices on a parent bus, marks each as disconnected, then marks
each device's children as disconnected using pci_walk_bus().

The same can be achieved more succinctly by calling pci_walk_bus() on
the parent bus.  Moreover, this does not need to wait until acquiring
pci_lock_rescan_remove(), so move it out of that critical section.

The critical section in err.c contains a pci_dev_get() / pci_dev_put()
pair which was apparently copy-pasted from pciehp_pci.c.  In the latter
it serves the purpose of holding the struct pci_dev in place until the
Command register is updated.  err.c doesn't do anything like that, hence
the pair is unnecessary.  Remove it.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Oza Pawandeep <poza@codeaurora.org>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2018-09-17 16:34:35 -05:00
Bjorn Helgaas 3a48dc6fc2 Merge branch 'pci/virtualization'
- To avoid bus errors, enable PASID only if entire path supports End-End
    TLP prefixes (Sinan Kaya)

  - Unify slot and bus reset functions and remove hotplug knowledge from
    callers (Sinan Kaya)

  - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to
    fix guest reboot issues (Alex Williamson)

  - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller
    (Bjorn Helgaas)

* pci/virtualization:
  PCI: Add function 1 DMA alias quirk for Marvell 88SS9183
  PCI: Delay after FLR of Intel DC P3700 NVMe
  PCI: Disable Samsung SM961/PM961 NVMe before FLR
  PCI: Export pcie_has_flr()
  PCI: Rename pci_try_reset_bus() to pci_reset_bus()
  PCI: Deprecate pci_reset_bus() and pci_reset_slot() functions
  PCI: Unify try slot and bus reset API
  PCI: Hide pci_reset_bridge_secondary_bus() from drivers
  IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset
  PCI: Handle error return from pci_reset_bridge_secondary_bus()
  PCI/IOV: Tidy pci_sriov_set_totalvfs()
  PCI: Enable PASID only if entire path supports End-End TLP prefixes

# Conflicts:
#	drivers/pci/hotplug/pciehp_hpc.c
2018-08-15 14:59:06 -05:00
Bjorn Helgaas 3c3ab37f4c Merge branch 'pci/aer'
- Decode AER errors with names similar to "lspci" (Tyler Baicar)

  - Expose AER statistics in sysfs (Rajat Jain)

  - Clear AER status bits selectively based on the type of recovery (Oza
    Pawandeep)

  - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru
    Gagniuc)

  - Don't clear AER status bits if we're using the "Firmware-First"
    strategy where firmware owns the registers (Alexandru Gagniuc)

* pci/aer:
  PCI/AER: Don't clear AER bits if error handling is Firmware-First
  PCI/AER: Remove duplicate PCI_EXP_AER_FLAGS definition
  PCI/portdrv: Remove pcie_portdrv_err_handler.slot_reset
  PCI/AER: Clear device status bits during ERR_COR handling
  PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
  PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
  PCI/AER: Factor out ERR_NONFATAL status bit clearing
  PCI/AER: Clear only ERR_NONFATAL bits during non-fatal recovery
  PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
  PCI/AER: Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST
  PCI/AER: Add sysfs attributes for rootport cumulative stats
  PCI/AER: Add sysfs attributes to provide AER stats and breakdown
  PCI/AER: Define aer_stats structure for AER capable devices
  PCI/AER: Move internal declarations to drivers/pci/pci.h
  PCI/AER: Adopt lspci names for AER error decoding
  PCI/AER: Expose internal API for obtaining AER information

# Conflicts:
#	drivers/pci/pci.h
2018-08-15 14:58:45 -05:00
Thomas Tai bd91b56cb3 PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()
When an fatal error is received by a non-bridge device, the device is
removed, and pci_stop_and_remove_bus_device() deallocates the device
structure.  The freed device structure is used by subsequent code to send
uevents and print messages.

Hold a reference on the device until we're finished using it.  This is not
an ideal fix because pcie_do_fatal_recovery() should not use the device at
all after removing it, but that's too big a project for right now.

Fixes: 7e9084b367 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
[bhelgaas: changelog, reduce get/put coverage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-26 12:13:04 -05:00
Oza Pawandeep ec752f5d54 PCI/AER: Clear device status bits during ERR_FATAL and ERR_NONFATAL
Clear the device status bits while handling both ERR_FATAL and ERR_NONFATAL
cases.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: rename to pci_aer_clear_device_status(), declare internal to PCI
core instead of exposing it everywhere]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20 15:27:11 -05:00
Oza Pawandeep 43ec03a9e5 PCI/AER: Remove ERR_FATAL code from ERR_NONFATAL path
broadcast_error_message() is only used for ERR_NONFATAL events, when the
state is always pci_channel_io_normal, so remove the unused alternate path.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20 15:27:10 -05:00
Bjorn Helgaas 7ab92e89bf PCI/AER: Clear only ERR_FATAL status bits during fatal recovery
During recovery from fatal errors, we previously called
pci_cleanup_aer_uncorrect_error_status(), which cleared *all* uncorrectable
error status bits (both ERR_FATAL and ERR_NONFATAL).

Instead, call a new pci_aer_clear_fatal_status() that clears only the
ERR_FATAL bits (as indicated by the PCI_ERR_UNCOR_SEVER register).

Based-on-patch-by: Oza Pawandeep <poza@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-20 15:27:07 -05:00
Sinan Kaya 381634cad1 PCI: Hide pci_reset_bridge_secondary_bus() from drivers
Rename pci_reset_bridge_secondary_bus() to pci_bridge_secondary_bus_reset()
and move the declaration from linux/pci.h to drivers/pci.h to be used
internally in PCI directory only.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19 18:04:23 -05:00
Sinan Kaya 1842623850 PCI: Handle error return from pci_reset_bridge_secondary_bus()
Commit 01fd61c0b9 ("PCI: Add a return type for
pci_reset_bridge_secondary_bus()") added a return value to the function to
return if a device is accessible following a reset.  Callers are not
checking the value.

Pass error code up high in the stack if device is not accessible.

Fixes: 01fd61c0b9 ("PCI: Add a return type for pci_reset_bridge_secondary_bus()")
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-07-19 18:04:23 -05:00
Oza Pawandeep 0b91439d35 PCI/AER: Pass service type to pcie_do_fatal_recovery()
Pass the service type to pcie_do_fatal_recovery() instead of assuming AER.
We will make DPC also use pcie_do_fatal_recovery(), and it needs to do
things a little differently for AER and DPC.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02 19:29:26 -05:00
Oza Pawandeep f252d0621a PCI/portdrv: Add generic pcie_port_find_service()
Add generic pcie_port_find_service() routine.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2018-05-17 16:49:30 -05:00
Oza Pawandeep 2e28bc84cf PCI/AER: Factor out error reporting to drivers/pci/pcie/err.c
Move the error reporting callbacks from aerdrv_core.c to err.c, where they
can be used by DPC in addition to AER.

As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER.
Moving them to the new err.c means they will now be built under
CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match.

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
[bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is
unset, update pci_uevent_ers() #ifdef wrapper]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-17 16:48:23 -05:00