This patch is to move the codes for checking sinfo_flags on one asoc
after this asoc has been found into sctp_sendmsg_check_sflags.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to move the codes for creating a new asoc if
no asoc was found into sctp_sendmsg_new_asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to move the codes for checking and sending on
one asoc after this asoc has been found or created into
sctp_sendmsg_to_asoc.
Note that 'err != -ESRCH' check is for the case that asoc is
freed when waiting for tx buffer in sctp_sendmsg_to_asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-03-03
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Extend bpftool to build up CFG information of eBPF programs and add an
option to dump this in DOT format such that this can later be used with
DOT graphic tools (xdot, graphviz, etc) to visualize it. Part of the
analysis performed is sub-program detection and basic-block partitioning,
from Jiong.
2) Multiple enhancements for bpftool's batch mode, more specifically the
parser now understands comments (#), continuation lines (\), and arguments
enclosed between quotes. Also, allow to read from stdin via '-' as input
file, all from Quentin.
3) Improve BPF kselftests by i) unifying the rlimit handling into a helper
that is then used by all tests, and ii) add support for testing tail calls
to test_verifier plus add tests covering all corner cases. The latter is
especially useful for testing JITs, from Daniel.
4) Remove x64 JIT's bpf_flush_icache() since flush_icache_range() is a noop
on x64, from Daniel.
5) Fix one more occasion in BPF samples where we do not detach the BPF program
from the cgroup after completion, from Prashant.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the ARRAY_SIZE macro on a couple of arrays to determine
size of the arrays. Also fix up alignment to clean up a checkpatch
warning. Improvement suggested by Coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* hwsim net namespace stuff from Kirill Tkhai
* A-MSDU support in fast-RX
* 4-addr mode support in fast-RX
* support for a spec quirk in Add-BA negotiation
-----BEGIN PGP SIGNATURE-----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=BTxG
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2018-03-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Only a few new things:
* hwsim net namespace stuff from Kirill Tkhai
* A-MSDU support in fast-RX
* 4-addr mode support in fast-RX
* support for a spec quirk in Add-BA negotiation
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Error code is already returned earlier if filter exists
at specified location. So, remove dead code trying to
free existing filter.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations allocate and destroy IDA identifier,
and these actions are synchronized by IDA subsystem locks.
Exit method removes mac80211_hwsim_data enteries from the lists,
and this is synchronized by hwsim_radio_lock with the rest
parallel pernet_operations. Also it queues destroy_radio()
work, and these work already may be executed in parallel
with any pernet_operations (as it's a work :). So, we may
mark these pernet_operations as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hwsim_netgroup counter is declarated as int, and it is incremented
every time a new net is created. After sizeof(int) net are created,
it will overflow, and different net namespaces will have the same
identifier. This patch fixes the problem by introducing IDA instead
of int counter. IDA guarantees, all the net namespaces have the uniq
identifier.
Note, that after we do ida_simple_remove() in hwsim_exit_net(),
and we destroy the ID, later there may be executed destroy_radio()
from the workqueue. But destroy_radio() does not use the ID, so it's OK.
Out of bounds of this patch, just as a report to wireless subsystem
maintainer, destroy_radio() increaments hwsim_radios_generation
without hwsim_radio_lock, so this may need one more patch to fix.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Quentin Monnet says:
====================
Several enhancements for bpftool batch mode are introduced in this series.
More specifically, input files for batch mode gain support for:
* comments (starting with '#'),
* continuation lines (after a line ending with '\'),
* arguments enclosed between quotes.
Also, make bpftool able to read from standard input when "-" is provided as
input file name.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Improve argument parsing from batch input files in order to support
arguments enclosed between single (') or double quotes ("). For example,
this command can now be parsed in batch mode:
bpftool prog dump xlated id 1337 file "/tmp/my file with spaces"
The function responsible for parsing command arguments is copied from
its counterpart in lib/utils.c in iproute2 package.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Make bpftool read its command list from standard input when the name if
the input file is a single dash.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add support for continuation lines, such as in the following example:
prog show
prog dump xlated \
id 1337 opcodes
This patch is based after the code for support for continuation lines
from file lib/utils.c from package iproute2.
"Lines" in error messages are renamed as "commands", as we count the
number of commands (but we ignore empty lines, comments, and do not add
continuation lines to the count).
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Replace '#' by '\0' in commands read from batch files in order to avoid
processing the remaining part of the line, thus allowing users to use
comments in the files.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Eric Dumazet says:
====================
tcp_bbr: more GSO work
Playing with r8152 USB 1Gbit NIC, on both USB2 and USB3 slots, I found
that BBR was performing poorly, because of TSO being limited to 16KB
This patch series makes sure BBR is not under estimating number of
packets that are needed to fill the pipe when a device has suboptimal
TSO limits.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Its value is computed then immediately used,
there is no need to store it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is second part of dealing with suboptimal device gso parameters.
In first patch (350c9f484b "tcp_bbr: better deal with suboptimal GSO")
we dealt with devices having low gso_max_segs
Some devices lower gso_max_size from 64KB to 16 KB (r8152 is an example)
In order to probe an optimal cwnd, we want BBR being not sensitive
to whatever GSO constraint a device can have.
This patch removes tso_segs_goal() CC callback in favor of
min_tso_segs() for CC wanting to override sysctl_tcp_min_tso_segs
Next patch will remove bbr->tso_segs_goal since it does not have
to be persistent.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
Jiong says:
This patch set is an application of CFG information on eBPF program
visualization. It presents some initial code for building CFG information
from eBPF instruction sequences.
After we get eBPF program bytecode, we do sub-program detection and
basic-block partition. These information then are visualized into DOT
graph.
The user could use any DOT graphic tools (xdot, graphviz etc) to view it.
For example:
bpftool prog dump xlated id 2 visual &>output.dot
[xdot | dotty] output.dot
dot -Tpng -o output.png
This initial patch set hasn't tuned much on the dot description layout
nor decoration, we could improve them later once the direction of the patch
set is agreed on. We could also visualize some static analysis performance
data.
v2 (Jakub):
- update license headers and add SPDX tags.
====================
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bash completion for the "visual" keyword used for dumping the CFG of
eBPF programs with bpftool. Make sure we only complete with this keyword
when we dump "xlated" (and not "jited") instructions.
Acked-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds new command-line option for visualizing the xlated eBPF
sequence.
Documentations are updated accordingly.
Usage:
bpftool prog dump xlated id 2 visual
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch let bpftool print .dot graph file into stdout.
This graph is generated by the following steps:
- iterate through the function list.
- generate basic-block(BB) definition for each BB in the function.
- draw out edges to connect BBs.
This patch is the initial support, the layout and decoration of the .dot
graph could be improved.
Also, it will be useful if we could visualize some performance data from
static analysis.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds out edges for each basic-block. We will need these out
edges to finish the .dot graph drawing.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch partition basic-block for each function in the CFG. The
algorithm is simple, we identify basic-block head in a first traversal,
then second traversal to identify the tail.
We could build extended basic-block (EBB) in next steps. EBB could make the
graph more readable when the eBPF sequence is big.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch detect all sub-programs from the eBPF sequence and keep the
information in the new CFG data structure.
The detection algorithm is basically the same as the one in verifier except
we need to use insn->off instead of insn->imm to get the pc-relative call
offset. Because verifier has modified insn->off/insn->imm during finishing
the verification.
Also, we don't need to do some sanity checks as verifier has done them.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch factors out those code of dumping xlated eBPF instructions into
xlated_dumper.[h|c].
They are quite independent dumper functions, so better to be kept
separately.
New dumper support will be added in later patches in this set.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It is obvious we could use 'else if' instead of start a new 'if' in the
touched code.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
recvmmsg does not call ___sys_recvmsg when sk_err is set.
That is fine for normal reads but, for MSG_ERRQUEUE, recvmmsg
should always call ___sys_recvmsg regardless of sk->sk_err to
be able to clear error queue. Otherwise, users are not able to
drain the error queue using recvmmsg.
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: phy: Reduce duplication
This patch series reduces the duplication among 10G PHY drivers that just
essentially stub most functions, but do that while replicating what the existing
generic functions do.
Changes in v3:
- removed unused "reg" variable in teranetics.c
- fixed subject for patch 5 since we actually use gen10g_no_soft_reset()
Changes in v2:
- rename gen10g_soft_reset() to gen10g_no_soft_reset() to better illustrate
what it does (or does not)
- removed stray comment in marvell10g.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
cortina_soft_reset() does the same thing as gen10g_soft_reset(), and
cortina_config_aneg() is actually doing what gen10g_config_init() does
for 10G capable PHYs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update teranetics_aneg_done() to use genphy_c45_aneg_done() instead of
duplicating that code, and switch to gen10g_* functions where
appropriate instead of maintaining identical copies doing nothing.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to remove a fair amount of duplication in the different 10G PHY
drivers, export all gen10g_* functions to be able to make use of those.
While we are at it, rename gen10g_soft_reset() to gen10g_no_soft_reset()
to illustrate what it does.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Finn Thain says:
====================
Fixes, cleanup and modernization for mac89x0 driver
Changes since v4 of combined patch series:
- Removed redundant and non-portable MACH_IS_MAC tests.
- Added acked-by tags from Geert Uytterhoeven.
- Omitted patches unrelated to mac89x0 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Adopt the conventional style of debug logging because it is both
shorter and more flexible.
Remove the 'version_printed' flag as the version will be printed
only once anyway (when the module loads).
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix log message fragments that no longer produce the desired output
since the behaviour of printk() was changed.
Add missing printk severity levels.
Drop deprecated "out of memory" message as per checkpatch advice.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Apparently these Dayna cards don't have a pseudoslot declaration ROM
which means they can't be probed like NuBus cards.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern says:
====================
selftests: forwarding: misc bug fixes and enhancements
Bug fixes and an enhancement for the recent forwarding tests:
- only check tc version on tc tests
- handle multipath tests failing with 0 packet count
- fix ping command for IPv6 on Debian jessie
- improve summary of multipath tests
v2
- add CHECK_TC to bridge_vlan_aware.sh (Ido)
- dropped patch 2; always check for mz given its use
- fixed commit message for the last patch (Multipath: was dropped)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a better description to the summary for multipath tests. e.g.,
INFO: Running IPv6 multipath tests
TEST: ECMP [PASS]
INFO: Expected ratio 1.00 Measured ratio 1.02
TEST: Weighted MP 2:1 [PASS]
INFO: Expected ratio 2.00 Measured ratio 2.02
TEST: Weighted MP 11:45 [PASS]
INFO: Expected ratio 4.09 Measured ratio 4.03
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Debian jessie ping can not handle IPv6 addresses so the command
fails. Use PING6 which is set to ping6.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the packet stats have a difference of 0, the test output shows:
INFO: Expected ratio 2.00 Measured ratio
Runtime error (func=(main), adr=9): Divide by zero
(standard_in) 2: syntax error
(standard_in) 1: syntax error
./router_multipath.sh: line 187: test: : integer expression expected
TEST: Multipath [FAIL]
Too large discrepancy between expected and measured ratios
Handle the 0 and display a cleaner message:
INFO: Running IPv6 multipath tests
TEST: Multipath [FAIL]
Packet difference is 0
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Capabilities of tc command are irrelevant for router tests:
$ ./router.sh
SKIP: iproute2 too old, missing shared block support
Add a CHECK_TC flag and only check tc capabilities if set. Add flag to
tc_common.sh and have it sourced before lib.sh
Also, if the command lacks some feature the test should exit non-0.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: bfff486265 ("net: fib_rules: support for match on ip_proto, sport and dport")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
test_cgrp2_sock.sh and test_cgrp2_sock2.sh tests keep the program
attached to cgroup even after completion.
Using detach functionality of test_cgrp2_sock in both scripts.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
According to RFC 4429 (section 3.1), adding new IPv6 addresses as
optimistic addresses is acceptable, as long as the implementation
follows some rules:
* Optimistic DAD SHOULD only be used when the implementation is aware
that the address is based on a most likely unique interface
identifier (such as in [RFC2464]), generated randomly [RFC3041],
or by a well-distributed hash function [RFC3972] or assigned by
Dynamic Host Configuration Protocol for IPv6 (DHCPv6) [RFC3315].
Optimistic DAD SHOULD NOT be used for manually entered
addresses.
Thus, it seems reasonable to allow userspace to set the optimistic flag
when adding new addresses.
We must not let userspace set NODAD + OPTIMISTIC, since if the kernel is
not performing DAD we would never clear the optimistic flag. We must
also ignore userspace's request to add OPTIMISTIC flag to addresses that
have already completed DAD (addresses that don't have the TENTATIVE
flag, or that have the DADFAILED flag).
Then we also need to clear the OPTIMISTIC flag on permanent addresses
when DAD fails. Otherwise, IFA_F_OPTIMISTIC addresses added by userspace
can still be used after DAD has failed, because in
ipv6_chk_addr_and_flags(), IFA_F_OPTIMISTIC overrides IFA_F_TENTATIVE.
Setting IFA_F_OPTIMISTIC from userspace is conditional on
CONFIG_IPV6_OPTIMISTIC_DAD and the optimistic_dad sysctl.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix trivial spelling mistake "greater then" -> "greater than".
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As a part of working on MII time stamping infrastructure, I was trying
to figure out how netdev->phydev gets assigned, and I stumbled across
this. Ever since the new phylink code came in, the field is assigned
twice.
The function, phylink_connect_phy(), calls
phy_attach_direct()
phylink_bringup_phy()
and phy_attach_direct() sets
dev->phydev = phydev;
but phylink_bringup_phy() then sets the same field again:
pl->netdev->phydev = phy;
Similarly, the function, phylink_of_phy_connect(), calls
of_phy_attach()
phy_attach_direct()
phylink_bringup_phy()
The removal code is also duplicated:
phylink_disconnect_phy()
pl->netdev->phydev = NULL;
phy_disconnect()
phy_detach()
phydev->attached_dev->phydev = NULL;
This patch removes the redundant assignments, restricting manipulation
of the netdev.phydev field to phy_attach_direct() and phy_detach().
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
net/smc: Link Layer Control enhancements
here is a series of smc patches enabling SMC communication with peers
supporting more than one link per link group.
The first three patches are preparing code cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long