When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently this API uses single 64 bits mask for engines idle indication.
Recently, it was observed that more bits are needed for some ASICs.
This patch modifies the use of the idle mask and the idle_extensions
mask.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For future ASIC support the driver allows user to map certain regions
in the device's configuration space for direct access from userspace.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support completions that arrive directly to the user,
the driver needs to supply the user with the first available msix
interrupt available.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Instead of having it hard-coded as a define, pass it to the user
in runtime.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support the staged submission feature, user must be
allowed to use the same CS sequence for all submissions in the
same staged submission.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Up until now validation errors were counted in the parsing field
of the cs_counters struct, so we added a new counter and increased
it when needed.
In addition, there were some locations where only one of the counters
was updated (ctx or aggregate) so add the second one to be updated
as well.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Forgot to add the comment for the opcode when it was added.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a new CB IOCTL opcode that enables a user to query about a CB and
get its usage count.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
add support for user to request a timestamp upon
cs completion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We want to indicate to the user that a certain command submission
is finished long time ago and it is no longer in database.
This means no further information regarding this cs can be obtained.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Once firmware security is enabled, driver must fetch pll frequencies
through the firmware message interface instead of reading the registers
directly.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The new state indicates that device should be reset in order
to re-gain funcionality.
This unique state can occur if reset_on_lockup is disabled
and an actual lockup has occurred.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Fix cs counters structure in uapi to be one flat structure instead
of two instances of the same other structure.
use atomic read/increment for context counters so we could use
one structure for both aggregated and context counters.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Implement sync stream collective for GAUDI. Need to allocate additional
resources for that and add ctx_fini() to clean up those resources.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
DMA5 QMAN is designated to be used for reduction process, hence it will
be no longer configured as external queue.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Define new API for collective wait support and modify sync stream
common flow. In addition add kernel CB allocation support for
internal queues.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In the future there will be situations where queues can accept either
kernel allocated CBs or user allocated CBs, depending on different
states.
Therefore, instead of using a boolean variable of kernel/user allocated
CB, we need to use a bitmask to indicate that, which will allow to
combine the two options.
Add a flag to the uapi so the user will be able to indicate whether
the CB was allocated by kernel or by user. Of course the driver
validates that.
Signed-off-by: Tal Cohen <talcohen@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
There are cases in which the device should access the host memory of a
CB through the device MMU, and thus this memory should be mapped.
The patch adds a flag to the CB IOCTL, in which a user can ask the
driver to perform the mapping when creating a CB.
The mapping is allowed only if a dedicated VA range was allocated for
the specific ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The user sometimes wants to check if a CS has completed to clean resources.
In that case, the user doesn't want to sleep but just to check if the CS
has finished and continue with his code.
Add a new definition to the API of the wait on CS. The new definition says
that if the timeout is 0, the driver won't sleep at all but return
immediately after checking if the CS has finished.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There is a case where the user reaches the maximum number of CS in-flight.
In that case, the driver rejects the new CS of the user with EAGAIN. Count
that event so the user can query the driver later to see if it happened.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.
Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add driver implementation for reading the total energy consumption
from the device ARM FW.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Initializing sensors requires attaching to pd 2. Add an ioctl for that.
This corresponds to FASTRPC_INIT_ATTACH_SENSORS in the downstream driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200908131013.19630-4-jonathan@marek.ca
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add command submission statistics structure which can be obtained
through the info ioctl. Each drop counter describes the reason for
which the command submission was dropped.
This information is needed for the user to be aware of the specific
reason for which the submitted work was dropped. The user can then
utilize the driver more efficiently.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add the new defines for GAUDI uapi interface. It includes the queue IDs,
the engine IDs, SRAM reserved space and Sync Manager reserved resources.
There is no new IOCTL or additional operations in existing IOCTLs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For Gaudi the driver gets two new additional properties from the F/W:
1. The card's type - PCI or PMC
2. The card's location in the Gaudi's box (relevant only for PMC).
The card's location is also passed to the user in the HW IP info structure
as it needs this property for establishing communication between Gaudis.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is a pre-requisite to upstreaming GAUDI support.
Signal/wait operations are done by the user to perform sync between two
Primary Queues (PQs). The sync is done using the sync manager and it is
usually resolved inside the device, but sometimes it can be resolved in the
host, i.e. the user should be able to wait in the host until a signal has
been completed.
The mechanism to define signal and wait operations is done by the driver
because it needs atomicity and serialization, which is already done in the
driver when submitting work to the different queues.
To implement this feature, the driver "takes" a couple of h/w resources,
and this is reflected by the defines added to the uapi file.
The signal/wait operations are done via the existing CS IOCTL, and they use
the same data structure. There is a difference in the meaning of some of
the parameters, and for that we added unions to make the code more
readable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The user must leave space for 2xMSG_PROT in the external CB, so adjust the
define of max size accordingly. The driver, however, can still create a CB
with the maximum size of 2MB. Therefore, we need to add a check
specifically for the user requested size.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add a new opcode to the INFO IOCTL that retrieves the device time
alongside the host time, to allow a user application that want to measure
device time together with host time (such as a profiler) to synchronize
these times.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Register qm to uacce framework for user crypto driver
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to
provide Shared Virtual Addressing (SVA) between accelerators and processes.
So accelerator can access any data structure of the main cpu.
This differs from the data sharing between cpu and io device, which share
only data content rather than address.
Since unified address, hardware and user space of process can share the
same virtual address in the communication.
Uacce create a chrdev for every registration, the queue is allocated to
the process when the chrdev is opened. Then the process can access the
hardware resource by interact with the queue file. By mmap the queue
file space to user space, the process can directly put requests to the
hardware without syscall to the kernel space.
The IOMMU core only tracks mm<->device bonds at the moment, because it
only needs to handle IOTLB invalidation and PASID table entries. However
uacce needs a finer granularity since multiple queues from the same
device can be bound to an mm. When the mm exits, all bound queues must
be stopped so that the IOMMU can safely clear the PASID table entry and
reallocate the PASID.
An intermediate struct uacce_mm links uacce devices and queues.
Note that an mm may be bound to multiple devices but an uacce_mm
structure only ever belongs to a single device, because we don't need
anything more complex (if multiple devices are bound to one mm, then
we'll create one uacce_mm for each bond).
uacce_device --+-- uacce_mm --+-- uacce_queue
| '-- uacce_queue
|
'-- uacce_mm --+-- uacce_queue
+-- uacce_queue
'-- uacce_queue
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com>
Signed-off-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some users prefer kdump tools to generate guest kernel dumpfile,
at the same time, need a out-of-band kernel panic event.
Currently if booting guest kernel with 'crash_kexec_post_notifiers',
QEMU will receive PVPANIC_PANICKED event and stop VM. If booting
guest kernel without 'crash_kexec_post_notifiers', guest will not
call notifier chain.
Add PVPANIC_CRASH_LOADED bit for pvpanic event, it means that guest
kernel actually hit a kernel panic, but the guest kernel wants to
handle by itself.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20200102023513.318836-3-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some processes outside of the kernel(Ex, QEMU) should know what the
value really is for, so move the bit definition to a uapi file.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Link: https://lore.kernel.org/r/20200102023513.318836-2-pizhenwei@bytedance.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose both soft and hard reset counts via INFO IOCTL.
This will allow system management applications to easily check
if the device has undergone reset.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The two defines that control the maximum size of a command buffer and the
maximum number of JOBS per CS need to be exported to the user as they are
part of the API towards user-space.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
To enable userspace processes, e.g. management utilities, to display the
card name to the user, add the card name property to the HW_IP
structure that is copied to the user in the INFO IOCTL.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add a new opcode to the INFO IOCTL to allow the user application to
retrieve the ASIC's current and maximum clock rate. The rate is
returned in MHz.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Support the allocation/deallocation of buffers mapped to the DSP.
When the memory mapped to the DSP at process creation is not enough,
the fastrpc library can extend it at runtime. This avoids having to do
large preallocations by default.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191009144123.24583-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want to stop using the acronym KMD. Therefore, replace all locations
(except for register names we can't modify) where KMD is written to other
terms such as "Linux kernel driver" or "Host kernel driver", etc.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Add a new opcode to INFO IOCTL to retrieve aggregate H/W events. i.e. the
events counters are NOT cleared upon device reset, but count from the
loading of the driver.
Add the code to support it in the device event handling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Users and sysadmins usually want to know what is the device utilization as
a level 0 indication if they are efficiently using the device.
Add a new opcode to the INFO IOCTL that will return the device utilization
over the last period of 100-1000ms. The return value is 0-100,
representing as percentage the total utilization rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
The Coresight timestamp is enabled for a specific debug session using
the HL_DEBUG_OP_TIMESTAMP opcode of the debug IOCTL.
In order to have a perpetual timestamp that would be comparable between
various debug sessions, this patch moves the timestamp enablement to be
part of the HW initialization.
The HL_DEBUG_OP_TIMESTAMP opcode turns to be deprecated and shouldn't be
used. Old user-space that will call it won't see any change in the
behavior of the debug session.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Oded Gabbay