Commit Graph

36 Commits

Author SHA1 Message Date
Thomas Gleixner 8c9b9d87b8 x86/tsc: Limit the adjust value further
Adjust value 0x80000000 and other values larger than that render the TSC
deadline timer disfunctional.

We have not yet any information about this from Intel, but experimentation
clearly proves that this is a 32/64 bit and sign extension issue.

If adjust values larger than that are actually required, which might be the
case for physical CPU hotplug, then we need to disable the deadline timer
on the affected package/CPUs and use the local APIC timer instead.

That requires some surgery in the APIC setup code, so we just limit the
ADJUST register value into the known to work range for now and revisit this
when Intel comes forth with proper information.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
2016-12-18 16:37:04 +01:00
Thomas Gleixner 16588f6592 x86/tsc: Annotate printouts as firmware bug
Make it more obvious that the BIOS is screwed up.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
2016-12-18 16:35:15 +01:00
Thomas Gleixner 5bae156241 x86/tsc: Force TSC_ADJUST register to value >= zero
Roland reported that his DELL T5810 sports a value add BIOS which
completely wreckages the TSC. The squirmware [(TM) Ingo Molnar] boots with
random negative TSC_ADJUST values, different on all CPUs. That renders the
TSC useless because the sycnchronization check fails.

Roland tested the new TSC_ADJUST mechanism. While it manages to readjust
the TSCs he needs to disable the TSC deadline timer, otherwise the machine
just stops booting.

Deeper investigation unearthed that the TSC deadline timer is sensitive to
the TSC_ADJUST value. Writing TSC_ADJUST to a negative value results in an
interrupt storm caused by the TSC deadline timer.

This does not make any sense and it's hard to imagine what kind of hardware
wreckage is behind that misfeature, but it's reliably reproducible on other
systems which have TSC_ADJUST and TSC deadline timer.

While it would be understandable that a big enough negative value which
moves the resulting TSC readout into the negative space could have the
described effect, this happens even with a adjust value of -1, which keeps
the TSC readout definitely in the positive space. The compare register for
the TSC deadline timer is set to a positive value larger than the TSC, but
despite not having reached the deadline the interrupt is raised
immediately. If this happens on the boot CPU, then the machine dies
silently because this setup happens before the NMI watchdog is armed.

Further experiments showed that any other adjustment of TSC_ADJUST works as
expected as long as it stays in the positive range. The direction of the
adjustment has no influence either. See the lkml link for further analysis.

Yet another proof for the theory that timers are designed by janitors and
the underlying (obviously undocumented) mechanisms which allow BIOSes to
wreckage them are considered a feature. Well done Intel - NOT!

To address this wreckage add the following sanity measures:

- If the TSC_ADJUST value on the boot cpu is not 0, set it to 0

- If the TSC_ADJUST value on any cpu is negative, set it to 0

- Prevent the cross package synchronization mechanism from setting negative
  TSC_ADJUST values.

Reported-and-tested-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Allen Hung <allen_hung@dell.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161213131211.397588033@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-15 11:44:29 +01:00
Thomas Gleixner 6a36958317 x86/tsc: Validate TSC_ADJUST after resume
Some 'feature' BIOSes fiddle with the TSC_ADJUST register during
suspend/resume which renders the TSC unusable.

Add sanity checks into the resume path and restore the
original value if it was adjusted.

Reported-and-tested-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Kevin Stanton <kevin.b.stanton@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Allen Hung <allen_hung@dell.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161213131211.317654500@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-15 11:44:29 +01:00
Thomas Gleixner 31f8a651fc x86/tsc: Validate cpumask pointer before accessing it
0-day testing encountered a NULL pointer dereference in a cpumask access
from tsc_store_and_check_tsc_adjust().

This happens when the function is called on the boot CPU and the topology
masks are not yet available due to CPUMASK_OFFSTACK=y.

Add a NULL pointer check for the mask pointer. If NULL it's safe to assume
that the CPU is the boot CPU and the first one in the package.

Fixes: 8b223bc7ab ("x86/tsc: Store and check TSC ADJUST MSR")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-01 14:40:52 +01:00
Thomas Gleixner b836554386 x86/tsc: Fix broken CONFIG_X86_TSC=n build
Add the missing return statement to the inline stub
tsc_store_and_check_tsc_adjust() and add the other stubs to make a
SMP=y,TSC=n build happy.

While at it, remove the unused variable from the UP variant of
tsc_store_and_check_tsc_adjust().

Fixes: commit ba75fb646931 ("x86/tsc: Sync test only for the first cpu in a package")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-30 09:44:52 +01:00
Thomas Gleixner cc4db26899 x86/tsc: Try to adjust TSC if sync test fails
If the first CPU of a package comes online, it is necessary to test whether
the TSC is in sync with a CPU on some other package. When a deviation is
observed (time going backwards between the two CPUs) the TSC is marked
unstable, which is a problem on large machines as they have to fall back to
the HPET clocksource, which is insanely slow.

It has been attempted to compensate the TSC by adding the offset to the TSC
and writing it back some time ago, but this never was merged because it did
not turn out to be stable, especially not on older systems.

Modern systems have become more stable in that regard and the TSC_ADJUST
MSR allows us to compensate for the time deviation in a sane way. If it's
available allow up to three synchronization runs and if a time warp is
detected the starting CPU can compensate the time warp via the TSC_ADJUST
MSR and retry. If the third run still shows a deviation or when random time
warps are detected the test terminally fails.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134018.048237517@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:18 +01:00
Thomas Gleixner 76d3b85158 x86/tsc: Prepare warp test for TSC adjustment
To allow TSC compensation cross nodes its necessary to know in which
direction the TSC warp was observed. Return the maximum observed value on
the calling CPU so the caller can determine the direction later.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134017.970859287@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:18 +01:00
Thomas Gleixner 4c5e3c6375 x86/tsc: Move sync cleanup to a safe place
Cleaning up the stop marker on the control CPU is wrong when we want to add
retry support. Move the cleanup to the starting CPU.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134017.892095627@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:18 +01:00
Thomas Gleixner a36f513681 x86/tsc: Sync test only for the first cpu in a package
If the TSC_ADJUST MSR is available all CPUs in a package are forced to the
same value. So TSCs cannot be out of sync when the first CPU in the package
was in sync.

That allows to skip the sync test for all CPUs except the first starting
CPU in a package.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134017.809901363@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:17 +01:00
Thomas Gleixner 1d0095feea x86/tsc: Verify TSC_ADJUST from idle
When entering idle, it's a good oportunity to verify that the TSC_ADJUST
MSR has not been tampered with (BIOS hiding SMM cycles). If tampering is
detected, emit a warning and restore it to the previous value.

This is especially important for machines, which mark the TSC reliable
because there is no watchdog clocksource available (SoCs).

This is not sufficient for HPC (NOHZ_FULL) situations where a CPU never
goes idle, but adding a timer to do the check periodically is not an option
either. On a machine, which has this issue, the check triggeres right
during boot, so there is a decent chance that the sysadmin will notice.

Rate limit the check to once per second and warn only once per cpu.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134017.732180441@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:16 +01:00
Thomas Gleixner 8b223bc7ab x86/tsc: Store and check TSC ADJUST MSR
The TSC_ADJUST MSR shows whether the TSC has been modified. This is helpful
in a two aspects:

1) It allows to detect BIOS wreckage, where SMM code tries to 'hide' the
   cycles spent by storing the TSC value at SMM entry and restoring it at
   SMM exit. On affected machines the TSCs run slowly out of sync up to the
   point where the clocksource watchdog (if available) detects it.

   The TSC_ADJUST MSR allows to detect the TSC modification before that and
   eventually restore it. This is also important for SoCs which have no
   watchdog clocksource and therefore TSC wreckage cannot be detected and
   acted upon.

2) All threads in a package are required to have the same TSC_ADJUST
   value. Broken BIOSes break that and as a result the TSC synchronization
   check fails.

   The TSC_ADJUST MSR allows to detect the deviation when a CPU comes
   online. If detected set it to the value of an already online CPU in the
   same package. This also allows to reduce the number of sync tests
   because with that in place the test is only required for the first CPU
   in a package.

   In principle all CPUs in a system should have the same TSC_ADJUST value
   even across packages, but with physical CPU hotplug this assumption is
   not true because the TSC starts with power on, so physical hotplug has
   to do some trickery to bring the TSC into sync with already running
   packages, which requires to use an TSC_ADJUST value different from CPUs
   which got powered earlier.

   A final enhancement is the opportunity to compensate for unsynced TSCs
   accross nodes at boot time and make the TSC usable that way. It won't
   help for TSCs which run apart due to frequency skew between packages,
   but this gets detected by the clocksource watchdog later.

The first step toward this is to store the TSC_ADJUST value of a starting
CPU and compare it with the value of an already online CPU in the same
package. If they differ, emit a warning and adjust it to the reference
value. The !SMP version just stores the boot value for later verification.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134017.655323776@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:16 +01:00
Thomas Gleixner bec8520dca x86/tsc: Detect random warps
If time warps can be observed then they should only ever be observed on one
CPU. If they are observed on both CPUs then the system is completely hosed.

Add a check for this condition and notify if it happens.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/20161119134017.574838461@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-29 19:23:15 +01:00
Andy Lutomirski eee6946e44 x86/asm/tsc/sync: Use rdtsc_ordered() in check_tsc_warp() and drop extra barriers
Using get_cycles was unnecessary: check_tsc_warp() is not called
on TSC-less systems. Replace rdtsc_barrier(); get_cycles() with
rdtsc_ordered().

While we're at it, make the somewhat more dangerous change of
removing barrier_before_rdtsc after RDTSC in the TSC warp check
code. This should be okay, though -- the vDSO TSC code doesn't
have that barrier, so, if removing the barrier from the warp
check would cause us to detect a warp that we otherwise wouldn't
detect, then we have a genuine bug.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm ML <kvm@vger.kernel.org>
Link: http://lkml.kernel.org/r/387c4c3a75f875bcde6cd68cee013273a744f364.1434501121.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06 15:23:29 +02:00
Bartosz Golaszewski 7d79a7bd75 x86: Replace cpu_**_mask() with topology_**_cpumask()
The former duplicate the functionalities of the latter but are
neither documented nor arch-independent.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/1432645896-12588-9-git-send-email-bgolaszewski@baylibre.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-27 15:22:17 +02:00
Paul Gortmaker 663b55b9b3 x86: Delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

[ hpa: undid incorrect removal from arch/x86/kernel/head_32.S ]

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1389054026-12947-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-01-06 21:25:18 -08:00
Paul Gortmaker 148f9bb877 x86: delete __cpuinit usage from all x86 files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/x86 uses of the __cpuinit macros from
all C files.  x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:56 -04:00
Suresh Siddha b0e5c77903 x86/tsc: Reduce the TSC sync check time for core-siblings
For each logical CPU that is coming online, we spend 20msec for
checking the TSC synchronization. And as this is done
sequentially for each logical CPU boot, this time gets added up
depending on the number of logical CPU's supported by the
platform.

Minimize this by using the socket topology information.

If the target CPU coming online doesn't have any of its
core-siblings online, a timeout of 20msec will be used for the
TSC-warp measurement loop. Otherwise a smaller timeout of 2msec
will be used, as we have some information about this socket
already (and this information grows as we have more and more
logical-siblings in that socket).

Ideally we should be able to skip the TSC sync check on the
other core-siblings, if the first logical CPU in a socket passed
the sync test. But as the TSC is per-logical CPU and can
potentially be modified wrongly by the bios before the OS boot,
TSC sync test for smaller duration should be able to catch such
errors. Also this will catch the condition where all the cores
in the socket doesn't get reset at the same time.

For example, with this modification, time spent in TSC sync
checks on a 4 socket 10-core with HT system gets reduced from
1580msec to 212msec.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jack Steiner <steiner@sgi.com>
Cc: venki@google.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1328581940.29790.20.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-22 11:49:40 +01:00
Suresh Siddha 28a00184be x86, tsc: Skip TSC synchronization checks for tsc=reliable
tsc=reliable boot parameter is supposed to skip all the TSC
stablility checks during boot time.

On a 8-socket system where we want to run an experiment with the
"tsc=reliable" boot option, TSC synchronization checks are not
getting skipped and marking the TSC as not stable.

Check for tsc_clocksource_reliable (which is set via
tsc=reliable or for platforms supporting synthetic TSC_RELIABLE
feature bit etc) and when set, skip the TSC synchronization
tests during boot.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1320446537.15071.14.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-12-05 18:00:31 +01:00
Thomas Gleixner 0199c4e68d locking: Convert __raw_spin* functions to arch_spin*
Name space cleanup. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner edc35bd72e locking: Rename __RAW_SPIN_LOCK_UNLOCKED to __ARCH_SPIN_LOCK_UNLOCKED
Further name space cleanup. No functional change

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner 445c89514b locking: Convert raw_spinlock to arch_spinlock
The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.

Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Mike Travis 9b3660a55a x86: Limit number of per cpu TSC sync messages
Limit the number of per cpu TSC sync messages by only printing
to the console if an error occurs, otherwise print as a DEBUG
message.

The info message "Skipping synchronization ..." is only printed
after the last cpu has booted.

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091118002222.181053000@alcatraz.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-26 10:17:45 +01:00
Roland Dreier ea01c0d731 x86: Reduce verbosity of "TSC is reliable" message
On modern systems, the kernel prints the message

    Skipping synchronization checks as TSC is reliable.

once for every non-boot CPU.

This gets kind of ridiculous on huge systems; for example, on a
64-thread system I was lucky enough to get:

    $ dmesg | grep 'TSC is reliable' | wc
         63     567    4221

There's no point to doing this for every CPU, since the code is
just checking the boot CPU anyway, so change this to a
printk_once() to make the message appears only once.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
LKML-Reference: <adazl8l2swc.fsf@cisco.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24 11:35:19 +02:00
Ingo Molnar 643bec9565 x86: clean up arch/x86/kernel/tsc_sync.c a bit
- remove unused define
 - make the lock variable definition stand out some more
 - convert KERN_* to pr_info() / pr_warning()

[ Impact: cleanup ]

LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-07 09:32:10 +02:00
Ingo Molnar fa623d1b02 Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core 2008-12-23 16:27:23 +01:00
Venki Pallipadi 93ce99e849 x86: add rdtsc barrier to TSC sync check
Impact: fix incorrectly marked unstable TSC clock

Patch (commit 0d12cdd "sched: improve sched_clock() performance") has
a regression on one of the test systems here.

With the patch, I see:

 checking TSC synchronization [CPU#0 -> CPU#1]:
 Measured 28 cycles TSC warp between CPUs, turning off TSC clock.
 Marking TSC unstable due to check_tsc_sync_source failed

Whereas, without the patch syncs pass fine on all CPUs:

 checking TSC synchronization [CPU#0 -> CPU#1]: passed.

Due to this, TSC is marked unstable, when it is not actually unstable.
This is because syncs in check_tsc_wrap() goes away due to this commit.

As per the discussion on this thread, correct way to fix this is to add
explicit syncs as below?

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-18 00:15:02 +01:00
Alok Kataria eca0cd028b x86: Add a synthetic TSC_RELIABLE feature bit.
Impact: Changes timebase calibration on Vmware.

Use the synthetic TSC_RELIABLE bit to workaround virtualization anomalies.

Virtual TSCs can be kept nearly in sync, but because the virtual TSC
offset is set by software, it's not perfect.  So, the TSC
synchronization test can fail. Even then the TSC can be used as a
clocksource since the VMware platform exports a reliable TSC to the
guest for timekeeping purposes. Use this bit to check if we need to
skip the TSC sync checks.

Along with this also set the CONSTANT_TSC bit when on VMware, since we
still want to use TSC as clocksource on VM running over hardware which
has unsynchronized TSC's (opteron's), since the hypervisor will take
care of providing consistent TSC to the guest.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-11-01 18:58:01 -07:00
Arjan van de Ven bde78a79a6 x86: use WARN() in arch/x86/kernel
Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
This also allowed the folding of some if()'s into the WARN()

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-21 10:01:52 +02:00
Ingo Molnar ad8ca495bd x86: add warning to check_tsc_warp()
add warning to check_tsc_warp() - if get_cycles() does not progress.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:24 +01:00
Ingo Molnar df43510b18 x86: check_tsc_warp() slowness fix
100 million max # of loops is a bit too much - reduce it to 10 million.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:23 +01:00
Andi Kleen 6d63de8dbc x86: remove get_cycles_sync
rdtsc is now speculation-safe, so no need for the sync variants of
the APIs.

[ mingo@elte.hu: removed the nsec_barrier() complication. ]

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:39 +01:00
Mike Galbraith 4c6b8b4d62 x86: fix: s2ram + P4 + tsc = annoyance
s2ram recently became useful here, except for the kernel's annoying
habit of disabling my P4's perfectly good TSC.

[  107.894470] CPU 1 is now offline
[  107.894474] SMP alternatives: switching to UP code
[  107.895832] CPU0 attaching sched-domain:
[  107.895836]  domain 0: span 1
[  107.895838]   groups: 1
[  107.896097] CPU1 is down
[    3.726156] Intel machine check architecture supported.
[    3.726165] Intel machine check reporting enabled on CPU#0.
[    3.726167] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[    3.726170] CPU0: Thermal monitoring enabled
[    3.726175] Back to C!
[    3.726708] Force enabled HPET at resume
[    3.726775] Enabling non-boot CPUs ...
[    3.727049] CPU0 attaching NULL sched-domain.
[    3.727165] SMP alternatives: switching to SMP code
[    3.727858] Booting processor 1/1 eip 3000
[    3.727862] CPU 1 irqstacks, hard=b042f000 soft=b042d000
[    3.738173] Initializing CPU#1
[    3.798912] Calibrating delay using timer specific routine.. 5986.12 BogoMIPS (lpj=2993061)
[    3.798920] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[    3.798931] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    3.798934] CPU: L2 cache: 512K
[    3.798936] CPU: Physical Processor ID: 0
[    3.798938] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[    3.798946] Intel machine check architecture supported.
[    3.798952] Intel machine check reporting enabled on CPU#1.
[    3.798955] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[    3.798959] CPU1: Thermal monitoring enabled
[    3.799161] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    3.799187] checking TSC synchronization [CPU#0 -> CPU#1]:
[    3.819181] Measured 63588552840 cycles TSC warp between CPUs, turning off TSC clock.
[    3.819184] Marking TSC unstable due to: check_tsc_sync_source failed.

If check_tsc_warp() is called after initial boot, and the TSC has in the
meantime been set (BIOS, user, silicon, elves) to a value lower than the
last stored/stale value, we blame the TSC.  Reset to pristine condition
after every test.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:04 +01:00
Dave Jones 835c34a168 Delete filenames in comments.
Since the x86 merge, lots of files that referenced their own filenames
are no longer correct.  Rather than keep them up to date, just delete
them, as they add no real value.

Additionally:
- fix up comment formatting in scx200_32.c
- Remove a credit from myself in setup_64.c from a time when we had no SCM
- remove longwinded history from tsc_32.c which can be figured out from
  git.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-13 10:01:23 -07:00
Thomas Gleixner 250c22777f x86_64: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:24 +02:00
Thomas Gleixner 9a163ed8e0 i386: move kernel
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:17:01 +02:00