Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the following checkpatch.pl warning in gdm_usb.c:
WARNING: suspect code indent for conditional statements (8, 12)
Signed-off-by: Mart Lubbers <mart@martlubbers.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to deregister the USB driver before releasing the tty driver
to avoid use-after-free in the USB disconnect callback where the tty
devices are deregistered.
Fixes: 61e1210476 ("staging: gdm7240: adding LTE USB driver")
Cc: stable <stable@vger.kernel.org> # 3.12
Cc: Won Kang <wkang77@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use macro min() to get the minimum of two values for
brevity and readability. The macro MUX_TX_MAX_SIZE
has a value of 2048 which is well within the integer
limits. This check was done manually.
Found using Coccinelle:
@@ type T; T x; T y; @@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@@
type T;
constant C;
expression e;
identifier i;
@@
T i
- = C
;
i = e;
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The icmp6_checksum was returning an invalid data type as the expected type
is __sum16. For returning such data type, icmp6_checksum, now, is using
the kernel functions for computing the checksum.
Here, the sparse message:
drivers/staging/gdm724x/gdm_lte.c:311:39: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_lte.c:311:39: expected restricted __sum16 [addressable] [assigned] [usertype] icmp6_cksum
drivers/staging/gdm724x/gdm_lte.c:311:39: got int
Signed-off-by: Javier Rodriguez <jrodbar@yahoo.es>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The find_dev_index() function is frustrating. If you give it an invalid
index then it returns 0. That was the intent except there is an
off-by-one so it can return MAX_NIC_TYPE which is one higher than we
want.
There is one caller which had a sanity check to catch invalid returns,
but the other two callers assumed that index was valid.
My feeling is that when we are given invalid indexes, that should be
treated like an error and we abandon what we were doing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the driver's HCI structs and associated endian-converter
functions with new driver-specific bitwise types. The new types
encourage correct endian-handling within the driver by triggering
sparse warnings when mixing with other types. The driver's
endian-converters provide correct and warning-free conversions.
Driver-specific bitwise types are used instead of the standard
endian-specific types because the attached device can be of either
endian. This is also why the driver has its own endian-conversion
functions, which consider endianness of both the cpu and the attached
device.
Introducing the new types to the converters fixes the sparse warnings:
CHECK drivers/staging/gdm724x/gdm_endian.c
drivers/staging/gdm724x/gdm_endian.c:28:24: warning: incorrect type in return expression (different base types)
drivers/staging/gdm724x/gdm_endian.c:28:24: expected unsigned short
drivers/staging/gdm724x/gdm_endian.c:28:24: got restricted __le16 [usertype] <noident>
drivers/staging/gdm724x/gdm_endian.c:30:24: warning: incorrect type in return expression (different base types)
drivers/staging/gdm724x/gdm_endian.c:30:24: expected unsigned short
drivers/staging/gdm724x/gdm_endian.c:30:24: got restricted __be16 [usertype] <noident>
drivers/staging/gdm724x/gdm_endian.c:36:24: warning: cast to restricted __le16
drivers/staging/gdm724x/gdm_endian.c:38:24: warning: cast to restricted __be16
drivers/staging/gdm724x/gdm_endian.c:44:24: warning: incorrect type in return expression (different base types)
drivers/staging/gdm724x/gdm_endian.c:44:24: expected unsigned int
drivers/staging/gdm724x/gdm_endian.c:44:24: got restricted __le32 [usertype] <noident>
drivers/staging/gdm724x/gdm_endian.c:46:24: warning: incorrect type in return expression (different base types)
drivers/staging/gdm724x/gdm_endian.c:46:24: expected unsigned int
drivers/staging/gdm724x/gdm_endian.c:46:24: got restricted __be32 [usertype] <noident>
drivers/staging/gdm724x/gdm_endian.c:52:24: warning: cast to restricted __le32
drivers/staging/gdm724x/gdm_endian.c:54:24: warning: cast to restricted __be32
Signed-off-by: Eric S. Stone <esstone@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove one blank line in sequence of two empty lines.
Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
Spaces required around the '*' operator.
Signed-off-by: sayli karnik <karniksayli1995@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed a blankline after an opening bracket.
Signed-off-by: Samuele Baisi <ciccio87@gmail.com>
Acked-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The value assigned to ret will be overwritten before it could be read in a
future iteration of the loop. Removing the unnecessary assignment.
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch issues: "CHECK: Alignment should match open parenthesis"
Signed-off-by: Bruno Carvalho <brunocarvalhofarias@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Done using coccinelle:
@@
expression addr;
@@
- random_ether_addr(addr);
+ eth_random_addr(addr);
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces ternary operator with macro min as it shorter and
thus increases code readability. Macro min return the minimum of the
two compared values.
Made a semantic patch for changes:
@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With concurrency managed workqueues, use of dedicated workqueues
can be replaced by using system_wq. Drop usb_tx_wq and usb_rx_wq
by using system_wq.
Since there are multiple work items per udev but different udevs
do not need to be ordered, increase of concurrency level by
switching to system_wq should not break anything.
cancel_work_sync() is used to ensure that work is not pending or
executing on any CPU.
Lastly, since all devices are suspended, which shutdowns the work
items before the driver can be unregistered, it is guaranteed
that no work item is pending or executing by the time exit path
runs.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With concurrency managed workqueues, use of dedicated workqueues
can be replaced by using system_wq. Drop mux_rx_wq by using system_wq.
Since there is only one work item per mux_dev and different mux_devs
do not need to be ordered, increase of concurrency level by switching
to system_wq should not break anything.
cancel_work_sync() is used to ensure that work is not pending or
executing on any CPU.
Lastly, since all devices are suspended, which shutdowns the work item
before the driver can be unregistered, it is guaranteed that no work
item is pending or executing by the time exit path runs.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove parentheses around the right hand side of assignment statements
as they are not needed.
Semantic patch:
@@
expression a, b, c;
@@
(
a = (b == c)
|
a =
- (
b
- )
)
Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constifies tty_port_operations structure in
the tty code of the gdm724x driver since it
is not modified after its initialization.
Detected and found using Coccinelle.
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove wrapper function that can be replaced by a single line of code.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes multiple blank lines in order to follow linux
kernel coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch converts sizeof(TYPE) to sizeof(VAR) when used as
a kzalloc/kmaloc argument.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch add spaces around binary operators in order
to follow kernel coding style.
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Indent parameters and arguments passed to function calls to match
open paranthesis
Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiler can typecast variables implicitly so, explicit type cast is not
required and should be removed.
Semantic patch used:
@@
type T;
T e;
identifier x;
@@
* T x = (T)e;
Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gdm_endian.c: small changes were done to remove testing for host
endianness and in-driver conversion for byte-ordering.
The linux/kernel.h functions are used now.
gdm_endian.h: removal of code no longer needed with changes
in gdm_endian.c.
Signed-off-by: Jaime Arrocha <jarr@kerneldev.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix regression introduced by commit <29ef8a53542a>. After it writing
AT commands to /dev/GCT-ATM0 is unsuccessful (no echo, no response)
and dmesg show "gdmtty: invalid payload : 1 16 f011".
Before that commit value of dummy_cnt was only a padding size. After using
ALIGN() this value is increased by its first argument. So the following
usage of this variable needs correction.
Signed-off-by: Sławomir Demeszko <s.demeszko@wireless-instruments.com>
Cc: stable <stable@vger.kernel.org> # 3.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replace pr_err/pr_info with dev_err/dev_info, when
appropriate device structure is found.
Issue found and resolved using the following Coccinelle script.
pr_err/dev_err was substituted with pr_info/dev_info in the later case.
@r exists@
identifier f, s, i;
position p;
@@
f(...,struct s *i,...) {
<+...
when != i == NULL
pr_err@p(...);
...+>
}
@rr@
identifier r.s, s2, fld;
@@
struct s {
...
struct s2 *fld;
...
};
@rrr@
identifier rr.s2, fld2;
@@
struct s2 {
...
struct device fld2;
...
};
@@
identifier r.i, r.s, rr.fld, rrr.fld2;
position r.p;
@@
-pr_err@p
+dev_err
(
+ &i->fld->fld2,
...)
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions like devm_kzalloc, kmalloc_array, devm_ioremap,
usb_alloc_urb, alloc_netdev return NULL as a return value on failure.
Generally, When NULL represents failure, !x is commonly used.
This patch cleans up the tests on the results of these functions, thereby
using !x instead of x == NULL or NULL == x. This is done via following
coccinelle script:
@prob_7@
identifier x;
statement S;
@@
(
x = devm_kzalloc(...);
|
x = usb_alloc_urb(...);
|
x = kmalloc_array(...);
|
x = devm_ioremap(...);
|
x = alloc_netdev(...);
)
...
- if(NULL == x)
+ if(!x)
S
Further we have used isomorphism characteristics of coccinelle to
indicate x == NULL and NULL == x are equivalent. This is done via
following iso script.
Expression
@ is_null @ expression X; @@
X == NULL <=> NULL == X
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to fix "WARNING: line over 80 characters" found by
checkpatch.pl in gdm_lte.c.
Signed-off-by: Ning Zhou <zhou.ning.gd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a patch to the gdm_mux.c file that fixes a space before comma
coding style issue found by the checkpatch.pl tool.
Signed-off-by: Robert Nachlinger <robert.nachlinger@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following sparse warnings:
drivers/staging/gdm724x/gdm_mux.c:389:32: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_mux.c:389:32: expected unsigned int [unsigned] start_flag
drivers/staging/gdm724x/gdm_mux.c:389:32: got restricted __le32 [usertype] <noident
drivers/staging/gdm724x/gdm_mux.c:390:29: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_mux.c:390:29: expected unsigned int [unsigned] seq_num
drivers/staging/gdm724x/gdm_mux.c:390:29: got restricted __le32 [usertype] <noident>
drivers/staging/gdm724x/gdm_mux.c:391:34: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_mux.c:391:34: expected unsigned int [unsigned] payload_size
drivers/staging/gdm724x/gdm_mux.c:391:34: got restricted __le32 [usertype] <noident>
drivers/staging/gdm724x/gdm_mux.c:392:33: warning: incorrect type in assignment (different base types)
drivers/staging/gdm724x/gdm_mux.c:392:33: expected unsigned short [unsigned] packet_type
drivers/staging/gdm724x/gdm_mux.c:392:33: got restricted __le16 [usertype] <noident>
Sparse found above warnings, so this patch changes variable types of
structs. Because expected and got variable types are different.
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch.pl warnings:
WARNING: "Prefer ether_addr_copy() over memcpy() if the Ethernet
addresses are __aligned(2)" in file gdm_lte.c
Pahole shows that the addresses are aligned.
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "else is not generally useful after a break or return"
checkpatch.pl warning in gdm_usb.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added error checking for alloc_tx_struct in do_tx()
Signed-off-by: Abel Moyo <abelmoyo.ab@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes "Missing a blank line after declarations" checkpatch.pl warning in
gdm_mux.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
"Highlights:
1) Steady transitioning of the BPF instructure to a generic spot so
all kernel subsystems can make use of it, from Alexei Starovoitov.
2) SFC driver supports busy polling, from Alexandre Rames.
3) Take advantage of hash table in UDP multicast delivery, from David
Held.
4) Lighten locking, in particular by getting rid of the LRU lists, in
inet frag handling. From Florian Westphal.
5) Add support for various RFC6458 control messages in SCTP, from
Geir Ola Vaagland.
6) Allow to filter bridge forwarding database dumps by device, from
Jamal Hadi Salim.
7) virtio-net also now supports busy polling, from Jason Wang.
8) Some low level optimization tweaks in pktgen from Jesper Dangaard
Brouer.
9) Add support for ipv6 address generation modes, so that userland
can have some input into the process. From Jiri Pirko.
10) Consolidate common TCP connection request code in ipv4 and ipv6,
from Octavian Purdila.
11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.
12) Generic resizable RCU hash table, with intial users in netlink and
nftables. From Thomas Graf.
13) Maintain a name assignment type so that userspace can see where a
network device name came from (enumerated by kernel, assigned
explicitly by userspace, etc.) From Tom Gundersen.
14) Automatic flow label generation on transmit in ipv6, from Tom
Herbert.
15) New packet timestamping facilities from Willem de Bruijn, meant to
assist in measuring latencies going into/out-of the packet
scheduler, latency from TCP data transmission to ACK, etc"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
cxgb4 : Disable recursive mailbox commands when enabling vi
net: reduce USB network driver config options.
tg3: Modify tg3_tso_bug() to handle multiple TX rings
amd-xgbe: Perform phy connect/disconnect at dev open/stop
amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
net: sun4i-emac: fix memory leak on bad packet
sctp: fix possible seqlock seadlock in sctp_packet_transmit()
Revert "net: phy: Set the driver when registering an MDIO bus device"
cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
team: Simplify return path of team_newlink
bridge: Update outdated comment on promiscuous mode
net-timestamp: ACK timestamp for bytestreams
net-timestamp: TCP timestamping
net-timestamp: SCHED timestamp on entering packet scheduler
net-timestamp: add key to disambiguate concurrent datagrams
net-timestamp: move timestamp flags out of sk_flags
net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
cxgb4i : Move stray CPL definitions to cxgb4 driver
tcp: reduce spurious retransmits due to transient SACK reneging
qlcnic: Initialize dcbnl_ops before register_netdev
...
Greg Kroah-Hartman