Remove all eBPF tests involving LD_ABS/LD_IND from test_bpf.ko. Reason
is that the eBPF tests from test_bpf module do not go via BPF verifier
and therefore any instruction rewrites from verifier cannot take place.
Therefore, move them into test_verifier which runs out of user space,
so that verfier can rewrite LD_ABS/LD_IND internally in upcoming patches.
It will have the same effect since runtime tests are also performed from
there. This also allows to finally unexport bpf_skb_vlan_{push,pop}_proto
and keep it internal to core kernel.
Additionally, also add further cBPF LD_ABS/LD_IND test coverage into
test_bpf.ko suite.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_stacktrace_map and test_stacktrace_build_id are
enhanced to call bpf_get_stack in the helper to get the
stack trace as well. The stack traces from bpf_get_stack
and bpf_get_stackid are compared to ensure that for the
same stack as represented as the same hash, their ip addresses
or build id's must be the same.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test attached a raw_tracepoint program to raw_syscalls/sys_enter.
It tested to get stack for user space, kernel space and user
space with build_id request. It also tested to get user
and kernel stack into the same buffer with back-to-back
bpf_get_stack helper calls.
If jit is not enabled, the user space application will check
to ensure that the kernel function for raw_tracepoint
___bpf_prog_run is part of the stack.
If jit is enabled, we did not have a reliable way to
verify the kernel stack, so just assume the kernel stack
is good when the kernel stack size is greater than 0.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_verifier already has a few ARSH test cases.
This patch adds a new test case which takes advantage of newly
improved verifier behavior for bpf_get_stack and ARSH.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no functionality change in this patch. The common-purpose
trace functions, including perf_event polling and ksym lookup,
are moved from trace_output_user.c and bpf_load.c to
selftests/bpf/trace_helpers.c so that these function can
be reused later in selftests.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tools header file bpf.h is synced with kernel uapi bpf.h.
The new helper is also added to bpf_helpers.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-04-27
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add extensive BPF helper description into include/uapi/linux/bpf.h
and a new script bpf_helpers_doc.py which allows for generating a
man page out of it. Thus, every helper in BPF now comes with proper
function signature, detailed description and return code explanation,
from Quentin.
2) Migrate the BPF collect metadata tunnel tests from BPF samples over
to the BPF selftests and further extend them with v6 vxlan, geneve
and ipip tests, simplify the ipip tests, improve documentation and
convert to bpf_ntoh*() / bpf_hton*() api, from William.
3) Currently, helpers that expect ARG_PTR_TO_MAP_{KEY,VALUE} can only
access stack and packet memory. Extend this to allow such helpers
to also use map values, which enabled use cases where value from
a first lookup can be directly used as a key for a second lookup,
from Paul.
4) Add a new helper bpf_skb_get_xfrm_state() for tc BPF programs in
order to retrieve XFRM state information containing SPI, peer
address and reqid values, from Eyal.
5) Various optimizations in nfp driver's BPF JIT in order to turn ADD
and SUB instructions with negative immediate into the opposite
operation with a positive immediate such that nfp can better fit
small immediates into instructions. Savings in instruction count
up to 4% have been observed, from Jakub.
6) Add the BPF prog's gpl_compatible flag to struct bpf_prog_info
and add support for dumping this through bpftool, from Jiri.
7) Move the BPF sockmap samples over into BPF selftests instead since
sockmap was rather a series of tests than sample anyway and this way
this can be run from automated bots, from John.
8) Follow-up fix for bpf_adjust_tail() helper in order to make it work
with generic XDP, from Nikita.
9) Some follow-up cleanups to BTF, namely, removing unused defines from
BTF uapi header and renaming 'name' struct btf_* members into name_off
to make it more clear they are offsets into string section, from Martin.
10) Remove test_sock_addr from TEST_GEN_PROGS in BPF selftests since
not run directly but invoked from test_sock_addr.sh, from Yonghong.
11) Remove redundant ret assignment in sample BPF loader, from Wang.
12) Add couple of missing files to BPF selftest's gitignore, from Anders.
There are two trivial merge conflicts while pulling:
1) Remove samples/sockmap/Makefile since all sockmap tests have been
moved to selftests.
2) Add both hunks from tools/testing/selftests/bpf/.gitignore to the
file since git should ignore all of them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch migrates the original tests at samples/bpf/tcbpf2_kern.c
and samples/bpf/test_tunnel_bpf.sh to selftests. There are a couple
changes from the original:
1) add ipv6 vxlan, ipv6 geneve, ipv6 ipip tests
2) simplify the original ipip tests (remove iperf tests)
3) improve documentation
4) use bpf_ntoh* and bpf_hton* api
In summary, 'test_tunnel_kern.o' contains the following bpf program:
GRE: gre_set_tunnel, gre_get_tunnel
IP6GRE: ip6gretap_set_tunnel, ip6gretap_get_tunnel
ERSPAN: erspan_set_tunnel, erspan_get_tunnel
IP6ERSPAN: ip4ip6erspan_set_tunnel, ip4ip6erspan_get_tunnel
VXLAN: vxlan_set_tunnel, vxlan_get_tunnel
IP6VXLAN: ip6vxlan_set_tunnel, ip6vxlan_get_tunnel
GENEVE: geneve_set_tunnel, geneve_get_tunnel
IP6GENEVE: ip6geneve_set_tunnel, ip6geneve_get_tunnel
IPIP: ipip_set_tunnel, ipip_get_tunnel
IP6IP: ipip6_set_tunnel, ipip6_get_tunnel,
ip6ip6_set_tunnel, ip6ip6_get_tunnel
XFRM: xfrm_get_state
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Send udp data between a source and sink, optionally with udp gso.
The two processes are expected to be run on separate hosts.
A script is included that runs them together over loopback in a
single namespace for functionality testing.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Corked sockets take a different path to construct a udp datagram than
the lockless fast path. Test this alternate path.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Connected sockets use path mtu instead of device mtu.
Test this path by inserting a route mtu that is lower than the device
mtu. Verify that the path mtu for the connection matches this lower
number, then run the same test as in the connectionless case.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate udp gso, including edge cases (such as min/max gso sizes).
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When test_sockmap was running outside of selftests and was not being
run by build bots it was reasonable to spend significant amount of
time running various tests. The number of tests is high because many
different I/O iterators are run.
However, now that test_sockmap is part of selftests rather than
iterate through all I/O sides only test a minimal set of min/max
values along with a few "normal" I/O ops. Also remove the long
running tests. They can be run from other test frameworks on a regular
cadence.
This significanly reduces runtime of test_sockmap.
Before:
$ time sudo ./test_sockmap > /dev/null
real 4m47.521s
user 0m0.370s
sys 0m3.131s
After:
$ time sudo ./test_sockmap > /dev/null
real 0m0.514s
user 0m0.104s
sys 0m0.430s
The CLI is still available for users that want to test the long
running tests that do the larger send/recv tests.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds a new test program test_sockmap which is the old sample
sockmap program. By moving the sample program here we can now run it
as part of the self tests suite. To support this a populate_progs()
routine is added to load programs and maps which was previously done
with load_bpf_file(). This is needed because self test libs do not
provide a similar routine. Also we now use the cgroup_helpers
routines to manage cgroup use instead of manually creating one and
supplying it to the CLI.
Notice we keep the CLI around though because it is useful for dbg
and specialized testing.
To run use ./test_sockmap and the result should be,
Summary 660 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Since test_sock_addr is not supposed to run by itself,
remove it from TEST_GEN_PROGS and add it to
TEST_GEN_PROGS_EXTENDED. This way, run_tests will
not run test_sock_addr. The corresponding test to run
is test_sock_addr.sh.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking fixes from David Miller:
1) Fix rtnl deadlock in ipvs, from Julian Anastasov.
2) s390 qeth fixes from Julian Wiedmann (control IO completion stalls,
bad MAC address update sequence, request side races on command IO
timeouts).
3) Handle seq_file overflow properly in l2tp, from Guillaume Nault.
4) Fix VLAN priority mappings in cpsw driver, from Ivan Khoronzhuk.
5) Packet scheduler ife action fixes (malformed TLV lengths, etc.) from
Alexander Aring.
6) Fix out of bounds access in tcp md5 option parser, from Jann Horn.
7) Missing netlink attribute policies in rtm_ipv6_policy table, from
Eric Dumazet.
8) Missing socket address length checks in l2tp and pppoe connect, from
Guillaume Nault.
9) Fix netconsole over team and bonding, from Xin Long.
10) Fix race with AF_PACKET socket state bitfields, from Willem de
Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (51 commits)
ice: Fix insufficient memory issue in ice_aq_manage_mac_read
sfc: ARFS filter IDs
net: ethtool: Add missing kernel doc for FEC parameters
packet: fix bitfield update race
ice: Do not check INTEVENT bit for OICR interrupts
ice: Fix incorrect comment for action type
ice: Fix initialization for num_nodes_added
igb: Fix the transmission mode of queue 0 for Qav mode
ixgbevf: ensure xdp_ring resources are free'd on error exit
team: fix netconsole setup over team
amd-xgbe: Only use the SFP supported transceiver signals
amd-xgbe: Improve KR auto-negotiation and training
amd-xgbe: Add pre/post auto-negotiation phy hooks
pppoe: check sockaddr length in pppoe_connect()
l2tp: check sockaddr length in pppol2tp_connect()
net: phy: marvell: clear wol event before setting it
ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy
bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave
tcp: don't read out-of-bounds opsize
ibmvnic: Clean actual number of RX or TX pools
...
This patch adds new test cases for accesses to map values from map
helpers.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a test for fetching xfrm state parameters from a tc program running
on ingress.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fixes: 192dc405f3 ("selftests: net: add tcp_mmap program")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf 2018-04-21
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a deadlock between mm->mmap_sem and bpf_event_mutex when
one task is detaching a BPF prog via perf_event_detach_bpf_prog()
and another one dumping through bpf_prog_array_copy_info(). For
the latter we move the copy_to_user() out of the bpf_event_mutex
lock to fix it, from Yonghong.
2) Fix test_sock and test_sock_addr.sh failures. The former was
hitting rlimit issues and the latter required ping to specify
the address family, from Yonghong.
3) Remove a dead check in sockmap's sock_map_alloc(), from Jann.
4) Add generated files to BPF kselftests gitignore that were previously
missed, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull libnvdimm fixes from Dan Williams:
"A regression fix, new unit test infrastructure and a build fix:
- Regression fix addressing support for the new NVDIMM label storage
area access commands (_LSI, _LSR, and _LSW).
The Intel specific version of these commands communicated the
"Device Locked" status on the label-storage-information command.
However, these new commands (standardized in ACPI 6.2) communicate
the "Device Locked" status on the label-storage-read command, and
the driver was missing the indication.
Reading from locked persistent memory is similar to reading
unmapped PCI memory space, returns all 1's.
- Unit test infrastructure is added to regression test the "Device
Locked" detection failure.
- A build fix is included to allow the "of_pmem" driver to be built
as a module and translate an Open Firmware described device to its
local numa node"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
MAINTAINERS: Add backup maintainers for libnvdimm and DAX
device-dax: allow MAP_SYNC to succeed
Revert "libnvdimm, of_pmem: workaround OF_NUMA=n build error"
libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()
tools/testing/nvdimm: enable labels for nfit_test.1 dimms
tools/testing/nvdimm: fix missing newline in nfit_test_dimm 'handle' attribute
tools/testing/nvdimm: support nfit_test_dimm attributes under nfit_test.1
tools/testing/nvdimm: allow custom error code injection
libnvdimm, dimm: handle EACCES failures from label reads
This Kselftest update for 4.17-rc2 consists of a fix from Michael Ellerman
to not run dnotify_test by default to prevent Kselftest running forever.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJa2knEAAoJEAsCRMQNDUMc1iYP/R8TFK16Q5v1bh500oGnPc3n
wvjpTn3iJ8DohMbWCSJONbMbKQiY04F07iH4jRZJAHeL0/Eet+/rOgUJsy+9nF5n
GwI8E1xiZu23jhfP/oUJAYdeJwsAtytC6CiBk6iHNfk1m7KBpBdjIMkkQw1dJ1UX
dJ9fnNDahnjsZFdSQLVsjS+lwFUVUGOuYCEOwY4ys9ezqTx2jEqTBhOSrvqgt8Cv
6rXYEhGFT/TYcai/orJ7f+YE5wyxx/U/bsBFnJC8xGWGi5iB2dk5jiA0vGhPHjTh
cQ+ovELjt4Izu+nvAEBF34U/BAdyqqOGjs4vZQbCbgMBsWeDnO/J4vFUvxv2fCkr
A6Xsb8rsKS5IYzyaD8jcv7o160l4MXHNX90raH4p8KfAFhTkOmTDEElmh/iI0cEO
aFTjUoO8POhE9vMhfZS2zQUByBKHUzfFGGM1D/eoN9g2+ZSFajejiuqcG34J53GT
tkktDyJk07NclxTNOoSdjEIuc8tI7vErqywDwsMW2Tb5GRxonGwXao0alQx7QlfY
PKfFVy0qLFpCBR5hA2Ig152NstyNElnyFimjbjwZaanKBhCUqEl74z4ixj61wbot
rib1VVijhpSvoJGX3LDTnHwH9jyYCsoNJKvu8RqH/MptqnIsH8IKNJRfopmn4aHG
vxON0bW0XowtXqUFMas4
=okhu
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fix from Shuah Khan:
"A fix from Michael Ellerman to not run dnotify_test by default to
prevent Kselftest running forever"
* tag 'linux-kselftest-4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/filesystems: Don't run dnotify_test by default
Pull networking fixes from David Miller:
1) Unbalanced refcounting in TIPC, from Jon Maloy.
2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
Once the connection is established it makes no sense to change this.
From Eric Dumazet.
3) Missing attribute validation in neigh_dump_table(), also from Eric
Dumazet.
4) Fix address comparisons in SCTP, from Xin Long.
5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.
6) Fix tunnel refcounting in l2tp, from Guillaume Nault.
7) Fix double list insert in team driver, from Paolo Abeni.
8) af_vsock.ko module was accidently made unremovable, from Stefan
Hajnoczi.
9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.
10) Don't assume netdevice struct is DMA'able memory in virtio_net
driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
net/smc: fix shutdown in state SMC_LISTEN
bnxt_en: Fix memory fault in bnxt_ethtool_init()
virtio_net: sparse annotation fix
virtio_net: fix adding vids on big-endian
virtio_net: split out ctrl buffer
net: hns: Avoid action name truncation
docs: ip-sysctl.txt: fix name of some ipv6 variables
vmxnet3: fix incorrect dereference when rxvlan is disabled
llc: hold llc_sap before release_sock()
MAINTAINERS: Direct networking documentation changes to netdev
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
net: qmi_wwan: add Wistron Neweb D19Q1
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
net: stmmac: Disable ACS Feature for GMAC >= 4
net: mvpp2: Fix DMA address mask size
net: change the comment of dev_mc_init
net: qualcomm: rmnet: Fix warning seen with fill_info
tun: fix vlan packet truncation
tipc: fix infinite loop when dumping link monitor summary
tipc: fix use-after-free in tipc_nametbl_stop
...
This patch tests the BTF loading, map_create with BTF
and the changes in libbpf.
-r: Raw tests that test raw crafted BTF data
-f: Test LLVM compiled bpf prog with BTF data
-g: Test BPF_OBJ_GET_INFO_BY_FD for btf_fd
-p: Test pretty print
The tools/testing/selftests/bpf/Makefile will probe
for BTF support in llc and pahole before generating
debug info (-g) and convert them to BTF. You can supply
the BTF supported binary through the following make variables:
LLC, BTF_PAHOLE and LLVM_OBJCOPY.
LLC: The lastest llc with -mattr=dwarfris support for the bpf target.
It is only in the master of the llvm repo for now.
BTF_PAHOLE: The modified pahole with BTF support:
https://github.com/iamkafai/pahole/tree/btf
To add a BTF section: "pahole -J bpf_prog.o"
LLVM_OBJCOPY: Any llvm-objcopy should do
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The bpf selftests test_sock and test_sock_addr.sh failed
in my test machine. The failure looks like:
$ ./test_sock
Test case: bind4 load with invalid access: src_ip6 .. [PASS]
Test case: bind4 load with invalid access: mark .. [PASS]
Test case: bind6 load with invalid access: src_ip4 .. [PASS]
Test case: sock_create load with invalid access: src_port .. [PASS]
Test case: sock_create load w/o expected_attach_type (compat mode) .. [FAIL]
Test case: sock_create load w/ expected_attach_type .. [FAIL]
Test case: attach type mismatch bind4 vs bind6 .. [FAIL]
...
Summary: 4 PASSED, 12 FAILED
$ ./test_sock_addr.sh
Wait for testing IPv4/IPv6 to become available .....
ERROR: Timeout waiting for test IP to become available.
In test_sock, bpf program loads failed due to hitting memlock limits.
In test_sock_addr.sh, my test machine is a ipv6 only test box and using
"ping" without specifying address family for an ipv6 address does not work.
This patch fixed the issue by including header bpf_rlimit.h in test_sock.c
and test_sock_addr.c, and specifying address family for ping command.
Cc: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
adding bpf's sample program which is using bpf_xdp_adjust_tail helper
by generating ICMPv4 "packet to big" message if ingress packet's size is
bigger then 600 bytes
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
adding selftests for bpf_xdp_adjust_tail helper. in this synthetic test
we are testing that 1) if data_end < data helper will return EINVAL
2) for normal use case packet's length would be reduced.
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In commit ce290a1960 ("selftests: add devpts selftests"), the
filesystems directory was added to the top-level selftests Makefile.
That had the effect of causing the existing dnotify_test in the
filesystems directory to now be run as part of the default selftests
test-run. Unfortunately dnotify_test is actually an infinite loop.
Fix it by moving dnotify_test to TEST_GEN_PROGS_EXTENDED, which says
that it's a generated file (ie. built) but should not be run as part
of the default test suite run (it's an "extended" test).
While we're here cleanup a few other things, devpts_pts should be in
TEST_GEN_PROGS to indicate that it's built, and with the above two
changes we no longer need a custom all or clean rule.
Fixes: ce290a1960 ("selftests: add devpts selftests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This is a reference program showing how mmap() can be used
on TCP flows to implement receive zero copy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
writing nested virtualization tests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa1MZMAAoJEL/70l94x66DupgH/jIRQ6wsZ9Hq5qBJ39sLFXNe
cAIAbaCUAck4tl5YNDgv/SOQ644ClmDVP/4CgezqosoY29eLY0+P71GQZEIQ7aB5
Taa7UI5qYnIctBmxFwD1+iV717Vyb+QLpRnMb8zjLkfT/3S8HsQvpcYJlQrrN3PP
w4VIvhZjPx11wvXDCuY6ire7sBEb/vSQQewGWg9dLt4hnDz1tRFMtAg/7GVT+rG9
SjuH57NrXAKWiNVlQvYfLSfaTyPf5J41i49nwFJJVPY1kMaXvOSDDOfejTD/SjTs
pYye7o8TGbrsY9O8H85gxdppHz4K0+sP9xNunUqk1wQ+zo9lWTejIaDoN2rzyuA=
=GKBC
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bug fixes, plus a new test case and the associated infrastructure for
writing nested virtualization tests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: selftests: add vmx_tsc_adjust_test
kvm: x86: move MSR_IA32_TSC handling to x86.c
X86/KVM: Properly update 'tsc_offset' to represent the running guest
kvm: selftests: add -std=gnu99 cflags
x86: Add check for APIC access address for vmentry of L2 guests
KVM: X86: fix incorrect reference of trace_kvm_pi_irte_update
X86/KVM: Do not allow DISABLE_EXITS_MWAIT when LAPIC ARAT is not available
kvm: selftests: fix spelling mistake: "divisable" and "divisible"
X86/VMX: Disable VMX preemption timer if MWAIT is not intercepted
The test checks the behavior of setting MSR_IA32_TSC in a nested guest,
and the TSC_OFFSET VMCS field in general. It also introduces the testing
infrastructure for Intel nested virtualization.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sysfs userspace tooling generally expects the kernel to emit a newlines
when reading sysfs attributes.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The nfit_test.1 bus provides a pmem topology without blk-aperture
enabling, so it presents different failure modes for label space
handling. Allow custom DSM command error injection.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Given that libnvdimm driver stack takes specific actions on DIMM command
error codes like -EACCES, provide a facility to inject custom failures.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add copyright in two files before they get autorubberstamped.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Script in_netns.sh isn't installed.
--------------------
running psock_fanout test
--------------------
./run_afpackettests: line 12: ./in_netns.sh: No such file or directory
[FAIL]
--------------------
running psock_tpacket test
--------------------
./run_afpackettests: line 22: ./in_netns.sh: No such file or directory
[FAIL]
In current code added in_netns.sh to be installed.
Fixes: cc30c93fa0 ("selftests/net: ignore background traffic in psock_fanout")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
lib/kvm_util.c: In function ‘kvm_memcmp_hva_gva’:
lib/kvm_util.c:332:2: error: ‘for’ loop initial declarations are only allowed in C99 mode
So add -std=gnu99 to CFLAGS
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
in my local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements
-----BEGIN PGP SIGNATURE-----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=19bA
-----END PGP SIGNATURE-----
Merge tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"These commits have either been sitting in my INBOX or have been in my
local tree for some time. I need to push them upstream:
- Separate out config-bisect.pl from ktest.pl.
This allows users to do config bisects without full ktest setup.
- Email on status change.
Allow the user to be emailed on test start, finish, failure, etc.
- Other small fixes and enhancements"
* tag 'ktest-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: (24 commits)
ktest: Take submenu into account for grub2 menus
ktest.pl: Add MAIL_COMMAND option to define how to send email
ktest.pl: Use run_command to execute sending mail
ktest.pl: Allow dodie be recursive
ktest.pl: Kill test if mailer is not supported
ktest.pl: Add MAIL_PATH option to define where to find the mailer
ktest.pl: No need to print no mailer is specified when mailto is not
Ktest: add email options to sample.config
Ktest: Use dodie for critical falures
Ktest: Add SigInt handling
Ktest: Add email support
ktest.pl: Detect if a config-bisect was interrupted
ktest.pl: Make finding config-bisect.pl dynamic
ktest.pl: Have ktest.pl pass -r to config-bisect.pl to reset bisect
ktest.pl: Use diffconfig if available for failed config bisects
ktest.pl: Allow for the config-bisect.pl output to display to console
ktest: Use config-bisect.pl in ktest.pl
ktest: Add standalone config-bisect.pl program
ktest: Set do_not_reboot=y for CONFIG_BISECT_TYPE=build
ktest: Set buildonly=1 for CONFIG_BISECT_TYPE=build
...
Patch series "XArray", v9. (First part thereof).
This patchset is, I believe, appropriate for merging for 4.17. It
contains the XArray implementation, to eventually replace the radix
tree, and converts the page cache to use it.
This conversion keeps the radix tree and XArray data structures in sync
at all times. That allows us to convert the page cache one function at
a time and should allow for easier bisection. Other than renaming some
elements of the structures, the data structures are fundamentally
unchanged; a radix tree walk and an XArray walk will touch the same
number of cachelines. I have changes planned to the XArray data
structure, but those will happen in future patches.
Improvements the XArray has over the radix tree:
- The radix tree provides operations like other trees do; 'insert' and
'delete'. But what most users really want is an automatically
resizing array, and so it makes more sense to give users an API that
is like an array -- 'load' and 'store'. We still have an 'insert'
operation for users that really want that semantic.
- The XArray considers locking as part of its API. This simplifies a
lot of users who formerly had to manage their own locking just for
the radix tree. It also improves code generation as we can now tell
RCU that we're holding a lock and it doesn't need to generate as much
fencing code. The other advantage is that tree nodes can be moved
(not yet implemented).
- GFP flags are now parameters to calls which may need to allocate
memory. The radix tree forced users to decide what the allocation
flags would be at creation time. It's much clearer to specify them at
allocation time.
- Memory is not preloaded; we don't tie up dozens of pages on the off
chance that the slab allocator fails. Instead, we drop the lock,
allocate a new node and retry the operation. We have to convert all
the radix tree, IDA and IDR preload users before we can realise this
benefit, but I have not yet found a user which cannot be converted.
- The XArray provides a cmpxchg operation. The radix tree forces users
to roll their own (and at least four have).
- Iterators take a 'max' parameter. That simplifies many users and will
reduce the amount of iteration done.
- Iteration can proceed backwards. We only have one user for this, but
since it's called as part of the pagefault readahead algorithm, that
seemed worth mentioning.
- RCU-protected pointers are not exposed as part of the API. There are
some fun bugs where the page cache forgets to use rcu_dereference()
in the current codebase.
- Value entries gain an extra bit compared to radix tree exceptional
entries. That gives us the extra bit we need to put huge page swap
entries in the page cache.
- Some iterators now take a 'filter' argument instead of having
separate iterators for tagged/untagged iterations.
The page cache is improved by this:
- Shorter, easier to read code
- More efficient iterations
- Reduction in size of struct address_space
- Fewer walks from the top of the data structure; the XArray API
encourages staying at the leaf node and conducting operations there.
This patch (of 8):
None of these bits may be used for slab allocations, so we can use them
as radix tree flags as long as we mask them off before passing them to
the slab allocator. Move the IDR flag from the high bits to the
GFP_ZONEMASK bits.
Link: http://lkml.kernel.org/r/20180313132639.17387-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only tests I could come up with for /proc/uptime are:
- test that values increase monotonically for 1 second,
- bounce around CPUs and test the same thing.
Avoid glibc like plague for affinity given patches like this:
https://marc.info/?l=linux-kernel&m=152130031912594&w=4
Link: http://lkml.kernel.org/r/20180317165235.GB3445@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Perform reads with nearly everything in /proc, and some writing as well.
Hopefully memleak checkers and KASAN will find something.
[adobriyan@gmail.com: /proc/kmsg can and will block if read under root]
Link: http://lkml.kernel.org/r/20180316232147.GA20146@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
[adobriyan@gmail.com: /proc/sysrq-trigger lives on the ground floor]
Link: http://lkml.kernel.org/r/20180317164911.GA3445@avx2
Link: http://lkml.kernel.org/r/20180315201251.GA12396@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test fork counter formerly known as ->last_pid, the only part of
/proc/loadavg which can be tested.
Testing in init pid namespace is not reliable because of background
activity.
Link: http://lkml.kernel.org/r/20180311152241.GA26247@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I totally forgot that _parse_integer() accepts arbitrary amount of
leading zeroes leading to the following lookups:
OK
# readlink /proc/1/map_files/56427ecba000-56427eddc000
/lib/systemd/systemd
bogus
# readlink /proc/1/map_files/00000000000056427ecba000-56427eddc000
/lib/systemd/systemd
# readlink /proc/1/map_files/56427ecba000-00000000000056427eddc000
/lib/systemd/systemd
Link: http://lkml.kernel.org/r/20180303215130.GA23480@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann