mirror of https://gitee.com/openkylin/linux.git
115 Commits
| Author | SHA1 | Message | Date |
|---|---|---|---|
Qiufang Dai
|
78b4af312f |
clk: meson-axg: add clock controller drivers
Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> |
|
|
Linus Torvalds
|
cf9b0772f2 |
ARM: SoC driver updates for v4.15
This branch contains platform-related driver updates for ARM and ARM64,
these are the areas that bring the changes:
New drivers:
- Driver support for Renesas R-Car V3M (R8A77970)
- Power management support for Amlogic GX
- A new driver for the Tegra BPMP thermal sensor
- A new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- The usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa, uniphier
and mediatek families.
- Updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi.
Changes specific to some ARM-based SoC
- The Freescale/NXP DPAA QBMan drivers from PowerPC can now work
on ARM as well.
- Several changes for power management on Broadcom SoCs
- Various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek
- Minor Cleanups for Samsung, TI OMAP SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qDhq
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
|
|
|
Linus Torvalds
|
527d147074 |
ARM: Device-tree updates for 4.15
We add device tree files for a couple of additional SoCs in various areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking,
Amlogic A113D for audio, and Renesas R-Car V3M for automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic
and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues that
the latest version of 'dtc' now warns about. Unfortunately there is still
a lot left to do.
A rework of the ARM foundation model introduced several new files
for common variations of the model.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=TnSo
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"We add device tree files for a couple of additional SoCs in various
areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
networking, Amlogic A113D for audio, and Renesas R-Car V3M for
automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
Amlogic and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues
that the latest version of 'dtc' now warns about. Unfortunately there
is still a lot left to do.
A rework of the ARM foundation model introduced several new files for
common variations of the model"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
dt-bindings: bus: Add documentation for the Technologic Systems NBUS
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
arm: dts: mt7623: remove unused compatible string for pio node
arm: dts: mt7623: update usb related nodes
arm: dts: mt7623: update crypto node
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
...
|
|
|
Ard Biesheuvel
|
706cffc1b9 |
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
The Socionext Synquacer SoC has an external interrupt unit (EXIU) that forwards a block of 32 configurable input lines to 32 adjacent level-high type GICv3 SPIs. The EXIU has per-interrupt level/edge and polarity controls, and mask bits that keep the outgoing lines de-asserted, even though the controller may still latch interrupt conditions that occur while the line is masked. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> |
|
|
Arnd Bergmann
|
18ea0db308 |
Amlogic 64-bit DT updates for v4.15, round 2
- add support for new GPIO IRQ driver -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAln2BpMACgkQWTcYmtP7 xmV5og//YkRwzS21agdQu3ZYCh/VP5i1CUhXZkp520DSLeY60LZfQNnz1lFvFHjN baSW2Gypy9rBjcRr4efl79Qb8v10JvLytUt7LYLHCFaU/u5AeEPFNLc0E4JzKtIB n8x99sqoY0NsVBfN4yVLqNmQjUZw87+I0nit/BcOAoHdOTnxtK1GBgcVF3ovRwet T/opxgKQeR2rp1NS5kjye9NYt/HK9WCE9e3eoO+h0OjLtlVu9b2M2/XYz2yMKlmj T09SWZx9gmqF47B3mXb0/f5KUaYNnnoxVGx8F55oVQhtWZcTt9G67CvBnAdU26Lm ftw0uwOF1Rjc4heybJkePm4k5pJTtXtgmCoEQl79/L1v+dvC1d+oPPvExd7Zp5rU qiT5SKOIeCP7Bclzbn01mszMFefxmtJe2zyrbwjL/Ntvo/1DlifI70Rjde7rY+Mw pWtgONhRjr8Q5XvFXNKVXqeDlLBM8Qv+YOqZ2weMqdBDsbr1LFIeCZOhRNu3O1qR bNQ+soVfuHL7ei6lks+cbBApNRDN+J0YIx2Y6alJ/0kjpI2aNWvGPfgdmPq5w4Uw rOIRgm19Et5loHbdI60A1VfKNlu+WkrSkESj4h6bQ2pwt1tWso7RrlpfCXROcCbm 2JicBHIe1665E+FCRZOCPXdPx73SRBIPCVbNL3T1oomaf3prqrE= =vVV3 -----END PGP SIGNATURE----- Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit DT updates for v4.15, round 2" from Kevin Hilman: - add support for new GPIO IRQ driver * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: add external PHY interrupt on some platforms ARM64: dts: meson-gx: add gpio interrupt controller ARM64: meson: enable MESON_IRQ_GPIO in Kconfig ARM64: dts: meson-gxbb-odroidc2: fix usb1 power supply |
|
|
Jerome Brunet
|
f2c2122a6c |
ARM64: meson: enable MESON_IRQ_GPIO in Kconfig
select MESON_IRQ_GPIO in Kconfig for Amlogic's meson SoC family Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> |
|
|
Sean Wang
|
598f9b2ec4 |
arm64: mediatek: cleanup message for platform selection
The latest kernel tree already can support more MediaTek platforms such as MT2712 and MT7622, so additional descriptions for those platforms are added and certain cleanups are also being made here. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
|
|
Geert Uytterhoeven
|
a6d21c0940 |
arm64: renesas: Add Renesas R8A77970 Kconfig support
Add a configuration option for the R-Car V3M SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
|
|
Linus Torvalds
|
e90937e756 |
ARM: arm64: Devicetree updates for v4.14
As usual, device tree updates is the bulk of our material in this merge
window. This time around, 559 patches affecting both 32- and 64-bit
platforms.
Changes are too many to list individually, but some of the larger ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also several
new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=R45j
-----END PGP SIGNATURE-----
Merge tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM/arm64 Devicetree updates from Olof Johansson:
"As usual, device tree updates is the bulk of our material in this
merge window. This time around, 559 patches affecting both 32- and
64-bit platforms.
Changes are too many to list individually, but some of the larger
ones:
New platform/SoC support:
- Automotive:
+ Renesas R-Car D3 (R8A77995)
+ TI DT76x
+ MediaTek mt2712e
- Communication-oriented:
+ Qualcomm IPQ8074
+ Broadcom Stingray
+ Marvell Armada 8080
- Set top box:
+ Uniphier PXs3
Besides some vendor reference boards for the SoC above, there are also
several new boards/machines:
- TI AM335x Moxa UC-8100-ME-T open platform
- TI AM57xx Beaglebone X15 Rev C
- Microchip/Atmel sama5d27 SoM1 EK
- Broadcom Raspberry Pi Zero W
- Gemini-based D-Link DIR-685 router
- Freescale i.MX6:
+ Toradex Apalis module + Apalis and Ixora carrier boards
+ Engicam GEAM6UL Starter Kit
- Freescale i.MX53-based Beckhoff CX9020 Embedded PC
- Mediatek mt7623-based BananaPi R2
- Several Allwinner-based single-board computers:
+ Cubietruck plus
+ Bananapi M3, M2M and M64
+ NanoPi A64
+ A64-OLinuXino
+ Pine64
- Rockchip RK3328 Pine64/Rock64 board support
- Rockchip RK3399 boards:
+ RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
+ Theobroma Systems RK3399-Q7 SoM
- ZTE ZX296718 PCBOX Board"
* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
ARM: dts: at91: at91sam9g45: add AC97
arm64: dts: marvell: mcbin: enable more networking ports
arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
arm64: dts: marvell: add TX interrupts for PPv2.2
arm64: dts: uniphier: add PXs3 SoC support
ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
ARM: dts: uniphier: fix size of sdctrl nodes
ARM: dts: uniphier: add AIDET nodes
arm64: dts: uniphier: fix size of sdctrl node
arm64: dts: uniphier: add AIDET nodes
Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
arm64: dts: uniphier: add reset controller node of analog amplifier
arm64: dts: marvell: add Device Tree files for Armada-8KP
arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
dt-bindings: add rk3399-q7 SoM
ARM: dts: rockchip: enable usb for rv1108-evb
ARM: dts: rockchip: add usb nodes for rv1108 SoCs
dt-bindings: update grf-binding for rv1108 SoCs
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
...
|
|
|
Shawn Guo
|
03d95c264a |
arm64: select PINCTRL for ZTE platform
Select PINCTRL for ZTE platform, so that we can have ZX pinctrl driver options available for enabling. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> |
|
|
Geert Uytterhoeven
|
a4b68d283b |
arm64: renesas: Add Renesas R8A77995 Kconfig support
Add a configuration option for the R-Car D3 SoC. Note that r8a77995 is the first Renesas "r8a<n>" SoC using a 5 digit number in its Kconfig symbol, as r8a77990 will be a different SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> |
|
|
Linus Torvalds
|
19964541c2 |
ARM: SoC 64-bit changes
Changes to platform code for 64-bit ARM platforms. Andreas Färber adds two new platforms with initial code: Realtek RTD1295 and Action Semi S900. Both are fairly similar chips, used mainly in set-top-boxes, but with other possible applications, and additional members in the respective product families that could be added in the future. The code here is fairly minimal, as all the interesting parts are in device drivers and dts files. The Broadcom Vulcan platform gets dropped, as no products ever became available, and Cavium integrated the platform under a new name. Among some other defconfig changes, Timur Tabi enables a number of options that are typically required for server platforms. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAWVo2eWCrR//JCVInAQLA6w/8CF+OI6BAw6dcW9BIqyZc80/tlYpbm39+ nKpCWEndQCxBubjAD/+lFuUB5sh/twsq6MYsnvRM3s4KTy6yzcZSO387AZLXAoSy +OAyCd6JWQo4VrElPjTvzVWqCeuBjA/kh7x3cae+iYVREjKvwgyXNTIMKCtGWCcC ClBa3FHdSWOaobRIfrGwwbHVahdOMKwEDPma1PaJ/eaIcGA2H/P1Lwyqf4z3ayka mIPM6aWlwydFfJZYKiqzlSbN7ZMboB8SJf6xs56R9JUwybGU774OqTik2/pBbqJ3 RCtcEE5xq8xjC7s2frebLR/0amgoGqkCWSuj4ZU2AO+gg0sUnP3+cc1l6onkOleT JdnPFZ/pU4PfYDbfnm8M36omybQmRMw2Y1pdI+GlVPX4qTK1bcz+jbWwI1+uu5w0 f0Q5oj/O4MKTCTro/ez6GlrnM9x5/ObQb3B3Zk6UcTLNYPp2BcyOKE57udLw3x8v C2Rsn29sghKbmjD2cbSB6RvJdJezr5e2ZkRcKSuo5iLpJht1so4lwbbSJawrIwPm MmvGLwfia33KIbwpfh4BYTUQ9+dFARBbbxPrm3fryPFx88cLlXSwjN09QH+8R70w F3fed2EOr5/WvsqTazQarBSuqxCJ4uBvj3kjsc3f+bp1OjeofGqM9TwGVOxU7Rzy O5YjLVKdfe4= =771F -----END PGP SIGNATURE----- Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms. Andreas Färber adds two new platforms with initial code: Realtek RTD1295 and Action Semi S900. Both are fairly similar chips, used mainly in set-top-boxes, but with other possible applications, and additional members in the respective product families that could be added in the future. The code here is fairly minimal, as all the interesting parts are in device drivers and dts files. The Broadcom Vulcan platform gets dropped, as no products ever became available, and Cavium integrated the platform under a new name. Among some other defconfig changes, Timur Tabi enables a number of options that are typically required for server platforms" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: remove duplicate entry arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU arm64: defconfig: enable EDAC options arm64: defconfig: enable APEI and GHES features arm64: defconfig: enable support for PCIe hotplug arm64: defconfig: enable EFI_CAPSULE_LOADER arm64: defconfig: enable BLK_DEV_NVME arm64: defconfig: enable ACPI_CPPC_CPUFREQ arm64: marvell: enable ICU and GICP drivers arm64: marvell: enable the Armada 7K/8K pinctrl driver arm64: Prepare Actions Semi S900 ARM64: defconfig: enable meson SPICC as module ARM64: defconfig: enable IR core, decoders and Meson IR device arm64: defconfig: enable Simple Sound Card support arm64: defconfig: Enable ARCH_BRCMSTB arm64: defconfig: drop ARCH_VULCAN arm64: disable Broadcom Vulcan platform MAINTAINERS: Add Realtek section ARM64: Prepare Realtek RTD1295 |
|
|
Arnd Bergmann
|
96f630279a |
Actions Semi ARM64 SoC for v4.13
This adds a Kconfig symbol for DTs and drivers being added. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZTUaJAAoJEPou0S0+fgE/5gcQAK70t5sC0XKtjJ96ZC1t+w/u r5zQTlYQQYzS0B3NXLiC2ubJ/Z4b22V5a3ntT5r1JLH6ntvn/TlIYW2ov7cNCJsL H5VgmA31skAB0xgnkVPx+j0mpdlzJvYKerbNXsJHG7JI/htHcmoXfwT7VKoCWqDJ 8T6zRAM6tjiF9Va0JYKL4VRtJAKoBxN9PjGUVUvRTjCp6PEXNpG/vmMhLonRNS2+ K1WFyKNUMROdrf5/3WPVUEgC9WWw6wtBs4G+p1UWADj8zPXGEXeK/ZPW8SfTCOA6 /lZvm/puXPjNZmXl/kVVZBaxFcl5aTIP96OAiCXpnEs15ZuDANGpyHd5g3BZTOfh XFldHOqO6qlSKW3rdOeLjKtPakLYpVMGbkU9VZMvu/VvJbiCNFr1IXnnu4lELkUV 2Y+pCGXRUART6aRvwkx1HLgD/sgQyL9h16Zve6oW2oYA5UEQJ8A91PWsv7Qj9R1Z EeTxT9sJ+7QPBwNmhyW1ozPeWILeDpP41bI6N2UcPUQeIICTYWXq6bOyjfnExFzU FJut2UO1LDWY7Rpr41oxEIaFN50K0OaBLnTu7oUca9p+llhmiOnLMl1xJ7IpfxSI zvwkI0agrDRaRX/80fLg5QGAdSKoSBgU5+BzHg2J8KLFDb/LmRugge2SRFlTVpjY Ovd3HF/oqwoYoM3vCBSJ =8Vxy -----END PGP SIGNATURE----- Merge tag 'actions-arm64-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/arm64 Pull "Actions Semi ARM64 SoC for v4.13" from Andreas Färber: This adds a Kconfig symbol for DTs and drivers being added. * tag 'actions-arm64-soc-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions: arm64: Prepare Actions Semi S900 |
|
|
Arnd Bergmann
|
3056bfb0d3 |
mvebu arm64 for 4.13 (part 1)
- enable the ICU and GICP drivers for Armada 7K/8K - enable the pinctrl driver for Armada 7K/8K -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWUu2SyMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71e3RAJ44zrZRlNbv +4HVU8m9Id+eIbzctwCgm7tk8F29RvtTTFP6Ns6H/PXFyUM= =h99y -----END PGP SIGNATURE----- Merge tag 'mvebu-arm64-4.13-1' of git://git.infradead.org/linux-mvebu into next/arm64 Pull "mvebu arm64 for 4.13 (part 1)" from Gregory CLEMENT - enable the ICU and GICP drivers for Armada 7K/8K - enable the pinctrl driver for Armada 7K/8K * tag 'mvebu-arm64-4.13-1' of git://git.infradead.org/linux-mvebu: arm64: marvell: enable ICU and GICP drivers arm64: marvell: enable the Armada 7K/8K pinctrl driver |
|
|
Thomas Petazzoni
|
29ad6bd9ad |
arm64: marvell: enable ICU and GICP drivers
This commit enables the newly introduced Marvell GICP and ICUs driver for the 64-bit Marvell EBU platforms. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Gregory CLEMENT
|
c4c1436585 |
arm64: marvell: enable the Armada 7K/8K pinctrl driver
This commit makes sure the drivers for the Armada 7K/8K pin controllers are enabled. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Andreas Färber
|
c88cc3ee1b |
arm64: Prepare Actions Semi S900
Add ARCH_ACTIONS. Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Daniel Lezcano
|
bb0eb050a5 |
clocksource/drivers: Rename CLKSRC_OF to TIMER_OF
The config option name is now renamed to 'TIMER_OF' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> |
|
|
Olof Johansson
|
88e98d3b32 |
Realtek ARM64 SoC for v4.12
This adds a Kconfig symbol for DTs being added, plus a MAINTAINERS entry. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZJrucAAoJEPou0S0+fgE/zCQP/2CWVh4c2la8maowtJII1wmt dvdC88c4HMzvTrPeIihDxkM26yh07Zf2CEd16fTpfKmTiAJXpYhql7MydUwgHhPS CS8gzuJjasolL2r6ZtQ0pfLOFKjp22U4M78YK5wtX/hbXlSFJy08qRF8pEAvgCYU FHB6WOJC1dmnFaS3Vnxf7ZBOIme39hObD9KahBg9JM2BTUKfU1+Rbu6zqIUciyYb VZNUGY3rYgH3sBUjzCAHCIaZdC8zH1xw6f/og7ecGVTh+rxrRDDpSb6KxirfdLFM ABDJ+Oaw/ORT4uEeE4rTmxvT7oPDXbJoIOW6j8+wg6j6GAdC2TBQ/kpWRg3fTDiy APxjAuNpvUSLQJ9yZPtvkohl9V0xeVQXQVgYXypYXVYqUUCBK6jpLam1E2fgedmM h7sUw6hDAw9HgobJwicNMqu7j4KXqj338C0/TUMrLbtzTQlbirVhaiUKS/FP/Mh1 3IxCfP0i7/cAmTn63o3MCI0OI/X81unIfZQ2L1eeYQ05o7yLJ2rY1VNuM5iFhazs u9YFx8TTEPVbf+s2KIMOZBxxwkid2V6warW0iWKASmmPJL3Z72QJKt3oek0YGDYI MrGTfmU0m9LMLTttctctwWppgoTPKtF34fmZWMBtg9EBqpVV04ANS0uSUDxBgksv mIy1SIxvV6/aMCblaGoI =k2AG -----END PGP SIGNATURE----- Merge tag 'realtek-arm64-soc-for-4.12' of git://github.com/afaerber/linux into next/arm64 Realtek ARM64 SoC for v4.12 This adds a Kconfig symbol for DTs being added, plus a MAINTAINERS entry. * tag 'realtek-arm64-soc-for-4.12' of git://github.com/afaerber/linux: MAINTAINERS: Add Realtek section ARM64: Prepare Realtek RTD1295 Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Jayachandran C
|
a314520d82 |
arm64: disable Broadcom Vulcan platform
Disable the option ARCH_VULCAN as a step towards deleting it entirely. There is still a reference in the kernel tree for ARCH_VULCAN, so we have to keep the config option around until that reference is removed. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Olof Johansson <olof@lixom.net> |
|
|
Andreas Färber
|
1b0d665eb7 |
ARM64: Prepare Realtek RTD1295
Add a Kconfig option ARCH_REALTEK. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andreas Färber <afaerber@suse.de> |
|
|
Arnd Bergmann
|
6cde26fda1 |
mvebu arm64 for 4.12
enable the Armada 37xx pinctrl driver -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWQNZMyMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71eV+AJ9BF4aQWP++ 5XvbcEymvSUQpyHpEgCgglVHfSsQclyAAY6q193oSqJ+eR8= =Wjq2 -----END PGP SIGNATURE----- Merge tag 'mvebu-arm64-4.12-1' of git://git.infradead.org/linux-mvebu into fixes Merge "mvebu arm64 for 4.12" from Gregory CLEMENT: enable the Armada 37xx pinctrl driver * tag 'mvebu-arm64-4.12-1' of git://git.infradead.org/linux-mvebu: arm64: marvell: enable the Armada 37xx pinctrl driver |
|
|
Arnd Bergmann
|
900a9020af |
arm64: sunxi: always enable reset controller
The sunxi clk driver causes a link error when the reset controller subsystem is disabled: drivers/clk/built-in.o: In function `sun4i_ve_clk_setup': :(.init.text+0xd040): undefined reference to `reset_controller_register' drivers/clk/built-in.o: In function `sun4i_a10_display_init': :(.init.text+0xe5e0): undefined reference to `reset_controller_register' drivers/clk/built-in.o: In function `sunxi_usb_clk_setup': :(.init.text+0x10074): undefined reference to `reset_controller_register' We already force it to be enabled on arm32 and some other arm64 platforms, but not on arm64/sunxi. This adds the respective Kconfig statements to also select it here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> |
|
|
Gregory CLEMENT
|
d2718d1365 |
arm64: marvell: enable the Armada 37xx pinctrl driver
This commit makes sure the driver for the Armada 37xx pin controller is enabled. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> |
|
|
Olof Johansson
|
dd726fcb6b |
Samsung ARM64 update for v4.12:
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
-----BEGIN PGP SIGNATURE-----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=lXKo
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64
Samsung ARM64 update for v4.12:
1. Exynos power management drivers support now ARMv8 SoC - Exynos5433 - so
select them in ARCH_EXYNOS.
2. Enable few Exynos drivers for supported ARMv8 SoCs.
* tag 'samsung-soc64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable video, DRM and LPASS drivers for Exynos5433 and Exynos7
arm64: exynos: Enable Exynos PMU and PM domains drivers
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
|
Krzysztof Kozlowski
|
caab3df982 |
arm64: exynos: Enable Exynos PMU and PM domains drivers
Enable EXYNOS_PM_DOMAINS because recently Exynos5433 got support for Power Management domains. The Exynos5433 pinctrl driver requires EXYNOS_PMU to get the syscon-regmap for PMU address space. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> |
|
|
Icenowy Zheng
|
28ebb7700c |
arm64: only select PINCTRL for Allwinner platforms
As the pinctrl driver selecting is refactored in Kconfig file of pinctrl-sunxi, now we can select only PINCTRL for Allwinner platform, and the default value of several pinctrl drivers useful on ARM64 Allwinner SoCs will become Y. This is the situation of 32-bit ARM ARCH_SUNXI option. Drop the select of per-SoC pinctrl choices, but keep selecting PINCTRL. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |
|
|
Jayachandran C
|
03b6fd5db4 |
arm64: add THUNDER2 processor family
Add support for ThunderX2 CN99XX arm64 server processors. Introduce a new arm64 platform config option ARCH_THUNDER2 for these processors. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
|
|
Linus Torvalds
|
991688bfc6 |
ARM: SoC driver updates for v4.10
Driver updates for ARM SoCs, including a couple of newly added drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip
it is running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system controller
- A new checking module for the ARM "PSCI" (not to be confused
with "SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their
power management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra
bpmp interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates.
Conflicts:
- ARCH_RENESAS now selects SOC_BUS, but no longer needs GPIOLIB
- drivers/soc/renesas/Makefile: multiple files got added, keep
all in logical sorting
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=6dP8
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Driver updates for ARM SoCs, including a couple of newly added
drivers:
- A new driver for the power management controller on TI Keystone
- Support for the prerelease "SCPI" firmware protocol that ended up
being shipped by Amlogic in their GXBB SoC.
- A soc_device can now be matched using a glob from inside the
kernel, when another driver wants to know the specific chip it is
running on and cannot find out from DT, firmware or hardware.
- Renesas SoCs now support identification through the soc_device
interface, both in user space and kernel.
- Renesas r8a7743 and r8a7745 gain support for their system
controller
- A new checking module for the ARM "PSCI" (not to be confused with
"SCPI" mentioned above) firmware interface.
- A new driver for the Tegra GMI memory interface
- Support for the Tegra firmware interfaces with their power
management controllers
As usual, the updates for the reset controller framework are merged
here, as they tend to touch multiple SoCs as well, including a new
driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp
interface.
The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and
Rockchips SoCs see some further updates"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
misc: sram: remove useless #ifdef
drivers: psci: Allow PSCI node to be disabled
drivers: psci: PSCI checker module
soc: renesas: Identify SoC and register with the SoC bus
firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails
firmware: qcom: scm: Remove core, iface and bus clocks dependency
dt-bindings: firmware: scm: Add MSM8996 DT bindings
memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name()
bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name()
ARM: shmobile: Document DT bindings for Product Register
soc: renesas: rcar-sysc: add R8A7745 support
reset: Add Tegra BPMP reset driver
dt-bindings: firmware: Allow child nodes inside the Tegra BPMP
dt-bindings: Add power domains to Tegra BPMP firmware
firmware: tegra: Add BPMP support
firmware: tegra: Add IVC library
dt-bindings: firmware: Add bindings for Tegra BPMP
mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells()
mailbox: Add Tegra HSP driver
firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
...
|
|
|
Linus Torvalds
|
3bd776bbda |
ARM: SoC 64-bit changes for v4.9
Changes to platform code for 64-bit ARM platforms. We are not adding any new platforms that require code or Kconfig changes this time, so it's basically just defconfig changes to enable support for more drivers used on the existing platforms. This is mainly interesting for the Raspberry Pi 3, which should now work much better with the default build. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAWFLxS2CrR//JCVInAQJJDQ/9EVxolfQKMjld6M/ZpOaw1O/+rKUdFyUC S6PIJgQD9/DIUVU+PMtHjljp+2GK0lJpLNXK3Tb4sJjx68ry9PSSHjZMEOJv33nE mNsq3oQmbpPfZ6ufJrNqj1tS1ScxGDqudIx2L+DHwpg+lJjs984tKDQ4Ta18VI7m k+a2IxoBWzGvzE50NFJppryZBq4p1WspfAkBLfohtTRGlCtmztbai6YZT0zfL1Iy qdynNlh9yT5Y+JTTbnwPWJPH+YqsAMBeu/OqWyVfvpRc+fzPNIBNHrb5MfoWV6sP JGyRUoQ0tDb0r+BTk68/5ALtKQQ40sxvPPpJgqRBy72gN5F4WhfIhfhP5zBMoyLU X0pmPVB9CBFCz0BqUXcGofM/LvLLZeWOk+iAtl33AwmZ9U/e/e1Nobu9rqjv3hf1 nPqsDtisCo6RzDBfLCXX7XwX0GfRp3K81jWXIM7aULzhkrnFiPfz69qGFERLoTQf w35n0YpT6yZDRsYYdTxprXD9y64fg4fKsp5XEQB6cE5Ea43AuH0WruxtazOGbJrz nkatIO7dyK1/kl7fZZIxQiVY4F874j5X2bJPiCpB+vgDnkmPy8YV0PCfyRUA6jmK sFsQFGTbqquXiKdtjwz+wrL0yRESgmCswaPBTiwD5cQC7s3GnCOkFsMvetuRLGk2 WSdHwEQ886k= =B+Lz -----END PGP SIGNATURE----- Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms. We are not adding any new platforms that require code or Kconfig changes this time, so it's basically just defconfig changes to enable support for more drivers used on the existing platforms. This is mainly interesting for the Raspberry Pi 3, which should now work much better with the default build" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: drop GPIO_SYSFS on multiplatforms arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT arm64: defconfig: allow rk3399-based boards to boot from mmc and usb arm64: defconfig: enable RK808 components arm64: defconfig: enable I2C and DW MMC controller on rockchip platform arm64: defconfig: Enable Tegra186 SoC ARM64: configs: Activate Internal PHY for Meson GXL arm64: qcom: enable GPIOLIB in Kconfig arm64: configs: enable configs for msm899(2/4) basic support ARM64: bcm2835: add thermal driver to default config ARM64: configs: Add Platform MHU in defconfig MAINTAINERS: Update Broadcom Vulcan maintainer email arm64: defconfig: enable EEPROM_AT25 config option arm64: Enable HIBERNATION in defconfig arm64: defconfig: Enable DRM DU and V4L2 FCP + VSP modules ARM64: defconfig: Enable MMC related configs arm64: Add BCM2835 (Raspberry Pi 3) support to the defconfig |
|
|
Geert Uytterhoeven
|
8d6799a9ba |
soc: renesas: Identify SoC and register with the SoC bus
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().
Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only for now), or using a hardcoded
fallback if missing.
Example:
Detected Renesas R-Car Gen2 r8a7791 ES1.0
...
# cat /sys/devices/soc0/{machine,family,soc_id,revision}
Koelsch
R-Car Gen2
r8a7791
ES1.0
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
|
Michael Scott
|
e19811a89d |
arm64: qcom: enable GPIOLIB in Kconfig
While debugging a kernel image size issue, I discovered that if all non ARCH_QCOM configs in the ARM64 defconfig are disabled, the QCOM pinctrl drivers will not be built. The QCOM pinctrl drivers have a dependency on GPIOLIB which was being selected when other ARCH configs were enabled, but ARCH_QCOM doesn't select GPIOLIB directly. Let's select GPIOLIB here to ensure the pinctrl drivers are built for QCOM platforms. Signed-off-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> |
|
|
Masahiro Yamada
|
75924903c5 |
arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
The UniPhier reset driver (drivers/reset/reset-uniphier.c) has been merged. Select ARCH_HAS_RESET_CONTROLLER from the SoC Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
|
|
Linus Torvalds
|
a439f8f287 |
ARM: 64-bit DT updates for v4.8
The 64-bit DT changes are surprisingly small this time, we only add two
SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext
UniPhier LD11 TV SoC, each with their reference boards.
There are three new machines added for existing SoC platforms:
- The Marvell Armada 8040 development board is an impressive quad-core
Cortex-A72 machine with three 10gbit ethernet interfaces
- Qualcomms DragonBoard 820c single-board computer is their current
high-end phone platform in the 96boards form factor
- Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range
Android box based on the 8-core rk3368 SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=PxJN
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Arnd Bergmann:
"The 64-bit DT changes are surprisingly small this time, we only add
two SoC platforms: the ZTE ZX296718 Set-top-box SoC and the SocioNext
UniPhier LD11 TV SoC, each with their reference boards.
There are three new machines added for existing SoC platforms:
- The Marvell Armada 8040 development board is an impressive
quad-core Cortex-A72 machine with three 10gbit ethernet interfaces
- Qualcomms DragonBoard 820c single-board computer is their current
high-end phone platform in the 96boards form factor
- Rockchip: Tronsmart Orion r86 set-top-box is a popular mid-range
Android box based on the 8-core rk3368 SoC"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (91 commits)
arm64: dts: berlin4ct: Add L2 cache topology
arm64: dts: berlin4ct: enable all wdt nodes unconditionally
arm64: dts: berlin4ct: switch to Cortex-A53 specific pmu nodes
arm64: dts: Add ZTE ZX296718 SoC dts and Makefile
arm64: dts: apm: Add DT node for APM X-Gene 2 CPU clocks
arm64: dts: apm: Add X-Gene SoC hwmon to device tree
arm64: dts: apm: Fix interrupt polarity for X-Gene PCIe legacy interrupts
arm64: dts: apm: Add APM X-Gene v2 SoC PMU DTS entries
arm64: dts: apm: Add APM X-Gene SoC PMU DTS entries
arm64: dts: marvell: enable MSI for PCIe on Armada 7K/8K
arm64: dts: ls2080a: Add 'dma-coherent' for ls2080a PCI nodes
arm64: dts: rockchip: add Type-C phy for RK3399
arm64: dts: rockchip: enable the gmac for rk3399 evb board
arm64: dts: rockchip: add the gmac needed node for rk3399
arm64: dts: rockchip: support the pmu node for rk3399
arm64: dts: rockchip: change all interrupts cells to 4 on rk3399 SoCs
arm64: dts: rockchip: add the tcpc for rk3399 power domain
arm64: dts: rockchip: add efuse0 device node for rk3399
arm64: dts: rockchip: configure PCIe support for rk3399-evb
arm64: dts: rockchip: add the PCIe controller support for RK3399
...
|
|
|
Linus Torvalds
|
b4f33f6ddd |
ARM: SoC 64-bit changes for v4.9
Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Aside from that, we gain initial support for two set-top-box platforms,
both of which already have 32-bit support in arch/arm:
- Broadcom adds abstract support for the bcm7xxx/brcmstb platform,
presumably the respective dts files and more information will
follow at a later point.
- The ZTE ZX296718 SoC for set-top-boxes, a relative of the 32-bit
ZX296702 SoC that we already support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5Whi
-----END PGP SIGNATURE-----
Merge tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC 64-bit updates from Arnd Bergmann:
"Changes to platform code for 64-bit ARM platforms.
Nearly all of these are defconfig updates to enable new drivers or old
drivers still used on these 64-bit platforms.
Aside from that, we gain initial support for two set-top-box
platforms, both of which already have 32-bit support in arch/arm:
- Broadcom adds abstract support for the bcm7xxx/brcmstb platform,
presumably the respective dts files and more information will
follow at a later point.
- The ZTE ZX296718 SoC for set-top-boxes, a relative of the 32-bit
ZX296702 SoC that we already support"
* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: add ZTE ZX SoC family
arm64: defconfig: enable ZTE ZX related config
arm64: defconfig: enable common modules for power management
arm64: defconfig: enable meson I2C
arm64: defconfig: enable meson SPI as module
arm64: defconfig: enable meson WDT as modules
arm64: defconfig: enable HW random as module
arm64: defconfig: Enable SDHI and GPIO_REGULATOR
arm64: configs: enable PCIe driver for Aardvark
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
arm64: defconfig: enable bluetooth supports as modules
arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey
arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey
arm64: defconfig: Enable Hisi SAS and HNS
arm64: defconfig: Enable QDF2432 config options
arm64: sunxi: Kconfig: add essential pinctrl driver
arm64: defconfig: Add Renesas R-Car HSUSB driver support as module
arm64: Add Broadcom Set Top Box Kconfig entry point
arm64: defconfig: enable xhci-platform
|
|
|
Linus Torvalds
|
6a497e9d58 |
This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
- Do away with the last users of the obsolete Kconfig options
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
always sounded like an item on a wishlist to Santa Claus to
me). We can now select GPIOLIB and be done with it, for all
archs. After some struggle it even work on UM. Not that it has
GPIO, but if it wants to, it can select the library.
- Continued efforts to make drivers properly either tristate or
bool.
- Introduce a warning for drivers assigning default triggers to
their irqchip lines when probed from device tree, so we find and
fix these ambigous drivers. It is agreed that in the OF config
path, the device tree defines trigger characteristics.
- The same warning, mutatis mutandis, for ACPI-probed GPIO
irqchips.
- We introduce the ability to mark certain IRQ lines as "unusable"
as they can be taken by BIOS/firmware, unrouted in silicon and
generally nasty if you use them, and such things. This is
put to good use in the STMPE driver and also in the Cherryview
pin control driver.
- A new "mockup" virtual GPIO device that can be used for testing.
The plan is to add unit tests under tools/* for exercising this
device and verify that the kernel code paths are working as they
should.
- Make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
implicit all the time, but when people started building UM
with allyesconfig or allmodconfig it exploded in their face.
- Move some stray bits of device tree and ACPI HW description
callbacks down into their respective implementation silo. These
were causing issues when compiling on !HAS_IOMEM as well, so
now eventually UM compiles the GPIOLIB library if it wants to.
New drivers:
- New driver for the Aspeed GPIO front-end companion to the
pin controller merged through the pin control tree.
- New driver for the LP873x PMIC GPIO portions.
- New driver for Technologic Systems' I2C FPGA GPIO such as
TS4900, TS-7970, TS-7990 and TS-4100.
- New driver for the Broadcom BCM63xx series including BCM6338
and BCM6345.
- New driver for the Intel WhiskeyCove PMIC GPIO.
- New driver for the Allwinner AXP209 PMIC GPIO portions.
- New driver for Diamond Systems 48 line GPIO-MM, another of
these port-mapped I/O expansion cards.
- Support the STMicroelectronics STMPE1600 variant in the STMPE
driver.
Driver improvements:
- The STMPE driver now supports rising/falling edge detection
properly for IRQs.
- The PCA954x will now fetch and enable its VCC regulator properly.
- Major rework of the PCA953x driver with the goal of eventually
switching it over to use regmap and thus modernize it even more.
- Switch the IOP driver to use the generic MMIO GPIO library.
- Move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
over to this subsystem from MFD, achieveing some separation of
concerns.
-----BEGIN PGP SIGNATURE-----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=ABbi
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.9 series:
Subsystem improvements:
- do away with the last users of the obsolete Kconfig options
ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
always sounded like an item on a wishlist to Santa Claus to me). We
can now select GPIOLIB and be done with it, for all archs. After
some struggle it even work on UM. Not that it has GPIO, but if it
wants to, it can select the library.
- continued efforts to make drivers properly either tristate or bool.
- introduce a warning for drivers assigning default triggers to their
irqchip lines when probed from device tree, so we find and fix
these ambigous drivers. It is agreed that in the OF config path,
the device tree defines trigger characteristics.
- the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.
- we introduce the ability to mark certain IRQ lines as "unusable" as
they can be taken by BIOS/firmware, unrouted in silicon and
generally nasty if you use them, and such things. This is put to
good use in the STMPE driver and also in the Cherryview pin control
driver.
- a new "mockup" virtual GPIO device that can be used for testing.
The plan is to add unit tests under tools/* for exercising this
device and verify that the kernel code paths are working as they
should.
- make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
implicit all the time, but when people started building UM with
allyesconfig or allmodconfig it exploded in their face.
- move some stray bits of device tree and ACPI HW description
callbacks down into their respective implementation silo. These
were causing issues when compiling on !HAS_IOMEM as well, so now
eventually UM compiles the GPIOLIB library if it wants to.
New drivers:
- new driver for the Aspeed GPIO front-end companion to the pin
controller merged through the pin control tree.
- new driver for the LP873x PMIC GPIO portions.
- new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
TS-7970, TS-7990 and TS-4100.
- new driver for the Broadcom BCM63xx series including BCM6338 and
BCM6345.
- new driver for the Intel WhiskeyCove PMIC GPIO.
- new driver for the Allwinner AXP209 PMIC GPIO portions.
- new driver for Diamond Systems 48 line GPIO-MM, another of these
port-mapped I/O expansion cards.
- support the STMicroelectronics STMPE1600 variant in the STMPE
driver.
Driver improvements:
- the STMPE driver now supports rising/falling edge detection
properly for IRQs.
- the PCA954x will now fetch and enable its VCC regulator properly.
- major rework of the PCA953x driver with the goal of eventually
switching it over to use regmap and thus modernize it even more.
- switch the IOP driver to use the generic MMIO GPIO library.
- move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
over to this subsystem from MFD, achieveing some separation of
concerns"
* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
gpio: add missing static inline
gpio: OF: localize some gpiochip init functions
gpio: acpi: separation of concerns
gpio: OF: separation of concerns
gpio: make memory-mapped drivers depend on HAS_IOMEM
gpio: stmpe: use BIT() macro
gpio: stmpe: forbid unused lines to be mapped as IRQs
mfd/gpio: Move HTC GPIO driver to GPIO subsystem
gpio: MAINTAINERS: Add an entry for GPIO mockup driver
gpio/mockup: add virtual gpio device
gpio: Added zynq specific check for special pins on bank zero
gpio: axp209: Implement get_direction
gpio: aspeed: remove redundant return value check
gpio: loongson1: remove redundant return value check
ARM: omap2: fix missing include
gpio: tc3589x: fix up complaints on unsigned
gpio: tc3589x: add .get_direction() and small cleanup
gpio: f7188x: use gpiochip_get_data instead of container_of
gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
gpio: aspeed: fix return value check in aspeed_gpio_probe()
...
|
|
|
Linus Torvalds
|
19fe416532 |
* Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
* Split the memory controller part out of mpc85xx and share it with a
* new Freescale ARM Layerscape driver (York Sun)
* amd64_edac fixes (Yazen Ghannam)
* Misc cleanups, refactoring and fixes all over the place
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pcI8
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"A lot of movement in the EDAC tree this time around, coarse summary
below:
- Altera Arria10 enablement of NAND, DMA, USB, QSPI and SD-MMC FIFO
buffers (Thor Thayer)
- split the memory controller part out of mpc85xx and share it with a
new Freescale ARM Layerscape driver (York Sun)
- amd64_edac fixes (Yazen Ghannam)
- misc cleanups, refactoring and fixes all over the place"
* tag 'edac_for_4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (37 commits)
EDAC, altera: Add IRQ Flags to disable IRQ while handling
EDAC, altera: Correct EDAC IRQ error message
EDAC, amd64: Autoload module using x86_cpu_id
EDAC, sb_edac: Remove NULL pointer check on array pci_tad
EDAC: Remove NO_IRQ from powerpc-only drivers
EDAC, fsl_ddr: Fix error return code in fsl_mc_err_probe()
EDAC, fsl_ddr: Add entry to MAINTAINERS
EDAC: Move Doug Thompson to CREDITS
EDAC, I3000: Orphan driver
EDAC, fsl_ddr: Replace simple_strtoul() with kstrtoul()
EDAC, layerscape: Add Layerscape EDAC support
EDAC, fsl_ddr: Fix IRQ dispose warning when module is removed
EDAC, fsl_ddr: Add support for little endian
EDAC, fsl_ddr: Add missing DDR DRAM types
EDAC, fsl_ddr: Rename macros and names
EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx
EDAC, mpc85xx: Replace printk() with pr_* format
EDAC, mpc85xx: Drop setting/clearing RFXE bit in HID1
EDAC, altera: Rename MC trigger to common name
EDAC, altera: Rename device trigger to common name
...
|
|
|
Linus Torvalds
|
999dcbe241 |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq departement proudly presents:
- A rework of the core infrastructure to optimally spread interrupt
for multiqueue devices. The first version was a bit naive and
failed to take thread siblings and other details into account.
Developed in cooperation with Christoph and Keith.
- Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is
active then no further softirq processsing on interrupt return
happens. Otherwise we try to delegate and still run another batch
of network packets in the irq return path, which then tries to
delegate to ksoftirqd .....
- A proper machine parseable sysfs based alternative for
/proc/interrupts.
- ACPI support for the GICV3-ITS and ARM interrupt remapping
- Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC
- A new irq chip for the JCore (SuperH)
- The usual pile of small fixlets in core and irqchip drivers"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
softirq: Let ksoftirqd do its job
genirq: Make function __irq_do_set_handler() static
ARM/dts: Add EXTI controller node to stm32f429
ARM/STM32: Select external interrupts controller
drivers/irqchip: Add STM32 external interrupts support
Documentation/dt-bindings: Document STM32 EXTI controller bindings
irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs
pci/msi: Retrieve affinity for a vector
genirq/affinity: Remove old irq spread infrastructure
genirq/msi: Switch to new irq spreading infrastructure
genirq/affinity: Provide smarter irq spreading infrastructure
genirq/msi: Add cpumask allocation to alloc_msi_entry
genirq: Expose interrupt information through sysfs
irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization
irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI
irqchip/gicv3-its: Probe ITS in the ACPI way
irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI
irqchip/gicv3-its: Cleanup for ITS domain initialization
PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table
ACPI: Add new IORT functions to support MSI domain handling
...
|
|
|
Thomas Gleixner
|
474aa3dd3e |
irqchip core changes for v4.9
- jcore: Add AIC driver - mips-gic: Use for_each_set_bit - mvebu: Add PIC driver -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJX5Cv8AAoJEP45WPkGe8ZnG/YP/23xxSShaURhhgmdk7vqMlp3 D4C+YZqghx3Xq+kVTH5R20FeZbQuC7DNV1B+zo75DIbCAQ0aNCYU94DIOrGDNj/S QocuWUy4oawYl730GEE7AVQL4kBK+fOwwAn7c6HjcRunNEU/IgNXwkWZLir/hpL+ KRFWXnPSocKUh50lXcGeHPrChEduT7cz7f6U/OyYzb8AgHw3zjJiWCqMaTcIGF/V 6fYsQjEuAj79UMxsuTH0Mv0vA/SzbyhtRRBIsGcP/Ket6ZW6DfdglB3SsAdxHxRa RoweK8zVorDfixjAOA/OsZ8vrjtyF2y9e/uHVXGMWfBgbXmP19QxpxtP+7u0z1Cq /L9rW0vYoQfv3tjvSon5TUOW/QMqmqvoclSTz80nRJmocEm8Za871vD53+iFOyPE sy0CsrussaooFahIl1z/kE5bugBBJKoTAnsAtfaWpTXTW+KGWOqncxsh6H9bMZUc XXbqr5TOqJk5ck9LJafLdDeVA4Cw2j7tq4wzXPnxoPwy6Dwgdjinsw8QWMbrlywR 2zGFuFlJdbRmHftFJujZ9XorTLa7978AU5K7CHr7ofaV742DH5hBRAUvBx6jTNhA 4W9UchKtEPzgzrvESVBYSj+cgvBYllewZg1XZgxDqQQ5CI2ePTKLaQwjVWiO4Q3K d9ZytcRUtuJtEWfbnyaT =DNCg -----END PGP SIGNATURE----- Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux into irq/core Pull irqchip core changes for v4.9 from Jason Cooper - jcore: Add AIC driver - mips-gic: Use for_each_set_bit - mvebu: Add PIC driver |
|
|
Arnd Bergmann
|
6f9a53ee23 |
ZTE arm64 SoC changes for 4.9:
- Add a Kconfig option for ZTE ZX SoC family support -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJX25GmAAoJEFBXWFqHsHzOIh4H/30QlDQQyiPzTeKIn0Tfriyj aL13JVMxCIdGGLN3U1ruZReVwlBMnr14uWsjl7lFT3+VeOSEwyXbCzwn1SKGQ7uh GQ91KColUy2iFpWnhRCQHPUSUlBUq4R1qR4apP8laaM/xfS7QpG6dghzYcbwnrYG U51SLecjN234Oca5z7B1kIlOnxSxexEZfPIP2XfT1+ju+NyyU0yjSnLlAAgYVtbW SNAqrHj4gaZBe7VZB5hfE1ABPVjaXP8f8lkO9ihMHjR5tqEgfgZmayWKdVpR6Ky6 7y0UzUBIuu9WDCvvTqIEXahG3Up+/eeN6lqi4XBlnBGJee+5LBGQ8iyamh5B7CY= =RDGI -----END PGP SIGNATURE----- Merge tag 'zte-soc64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64 Pull "ZTE arm64 SoC changes for 4.9" from Shawn Guo: - Add a Kconfig option for ZTE ZX SoC family support * tag 'zte-soc64-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: add ZTE ZX SoC family |
|
|
Jun Nie
|
12496aea08 |
arm64: add ZTE ZX SoC family
This patch introduces ARCH_ZX to add the support of the ZTE ZX SoC family for the arm64 architecture. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> |
|
|
Arnd Bergmann
|
dc8c76dd82 |
Allwinner ARM64 Kconfig changes
Select the pinctrl driver in kconfig -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJX1cn/AAoJEBx+YmzsjxAg69QP/AunSj46Q/3JrDwGoGut5oQy aOKgZzVNry0DtDkY/F9NSBWuZoGM4jtCM79fpW+9dxzc8z0TcDUmA+FUjAzx7SyX ua9k6uvDlGta85jpb2UZApuc/1rXScXyGS6WVVYoV6P9AD7KqZVVBc7YxwNiPOw2 +ZBO4veplhtFRvv2HS+V/gsqgHyNTlwYMz9U5bI82aPbVnew/N9y+TblZShIv8Sa 9Lm+maNNMKXL7RQhbYPCVCE/d/Ym+xxTck+jR38VYnKruU35KaP/Wc2EeKt1UrGl NmoX71kTPD2DtkQ2vT6Jol8UrBe5GZ/X/ZKu1A8wkyXAnw6PAZ16hxL8+Z5tUHBg 1n3gqHQbpnhQ2AFeyC0+D7xc+PruCH4cYBw/bCZxB0IFMkfYxA+75hVhAgQtnQeP otWPyfvkbCqBgMD0cUUKm9i1TjcFuOrXoKmGn+GdP+A+zER/tSbkvJEN5XBPd9nK w/CYJPEw+1dMbNzEqx1mgy8xbdcuDEQniZE5+ysTGm/erTbMGB6nL6csST+YqabV DaXIup3OPQBTplcacDi2b8O9izU8Yu5gq27J/MowtETCF10KDQPAJogs/ukdv3kW WSJmclTVUxNxrE5yQVW8jiJtmBXVbqRsR9QSR79fhjYbwFofxvvIyaCW3Xjuhr9X xikbiJO0gyhYf2toHeXD =Cik5 -----END PGP SIGNATURE----- Merge tag 'sunxi-config64-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/arm64 Pull "Allwinner ARM64 Kconfig changes" from Maxime Ripard: Select the pinctrl driver in kconfig * tag 'sunxi-config64-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: arm64: sunxi: Kconfig: add essential pinctrl driver |
|
|
Arnd Bergmann
|
45624a6eb1 |
This pull request contains Broadcom ARM64-based SoC changes for 4.9, please pull
the following: - collective effort from Florian, Doug and Markus to add the ARCH_BRCMSTB Kconfig symbol to the ARM64 kernel build, which is purposedly the same as the ARM/Linux one in order not to update any driver dependencies -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXz3GCAAoJEIfQlpxEBwcExK8QAMSWny7XPDQGFOZm7w8T90Ud Cx2FaxNGNFybbuXT8Z6VinJU0YgCoGBnzTgI0hYj8JOX3iP5DQuh39Ar0ul7WswZ 6KrQ/aP9a6b82jGO+0NoP0R83IJgjNRnK+sFt63+dVxJqIpH4m5d6nnCnFnJrsQD Clii0Ij2JEHNEjcEaoa50s4bvWj1cMmiiFaInfbKgM3AnsTPXX2PJJvSqxTuwnKn gMSp8FWXdkNm4u651VA6loIJETRZ5T4rhrDw1mFcfpVps6ews/Ga+XCx78z6gdYA p2aRZIp6xXsi1m5zCGLRq0WiRDMyjaMXljgNJ5+9gPgKKdxxyMr+HEVx0ANJqLW6 HOYpxYX7+iDDZqgz1xf0LfYVbEFiohdFNPER/DKf4kTuc7QXD1AMfdlIcH3ndXzY BPLAeZkWWCjThRDEiOIEv4bx8OzwpcxqX4eRuQpXZFLxV2MkF9p9apepBJQxYubF n22AIBKDW1hYSKPhWoM4fVZQ5iK/oNAah48ignBTwawuCCZTwucQxkO0FV9G4Qpz bLJbXbEza7r5iQuPH3sRDLPCDsDmvBUv7M8WB4d+0ky/mHzjQ6JblK0LZ1kwMURt P4uPK8EhzyuyukTBwbr/LNhIie8i1rqBuIie4weGl1jUjiZ8NIn4fotkDn0c1xqq 1VjMTrJfApiUiX2p4Fwp =AjHP -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.9/soc-arm64' of http://github.com/Broadcom/stblinux into next/arm64 Pull "Broadcom soc-arm64 changes for 4.9" from Florian Fainelli: This pull request contains Broadcom ARM64-based SoC changes for 4.9, please pull the following: - collective effort from Florian, Doug and Markus to add the ARCH_BRCMSTB Kconfig symbol to the ARM64 kernel build, which is purposedly the same as the ARM/Linux one in order not to update any driver dependencies * tag 'arm-soc/for-4.9/soc-arm64' of http://github.com/Broadcom/stblinux: arm64: Add Broadcom Set Top Box Kconfig entry point |
|
|
Arnd Bergmann
|
a458ae7321 |
ARM64: hisilicon: defconfig updates for 4.9
- Enable hisilicon SAS and XGE for hip05 and hip06 - Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey - Add PINCTRL to HISI platform -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXyVBpAAoJEAvIV27ZiWZcqWcQALMdZkeDs5iIwihsrRMnVmj9 a/XA/xVFsZj8lys6LIhGWZ7L4BDZxLvF0065EeyVIDphhk51D5rgyYy2rP5SlDnj kZJxB/RoycDrp95rOZGHaC1prN23mmk6gGT3BK6CW6OJKEZI+UNu+a0P2EfntGR2 vpGl4MeoI0GT2ZvpN0c2uzURHGof687mAgHbrNKDmKYKkHgV9hA2D2oFjWdYxcYB fXh7a7d5vRpTrYIKo5R2T2XUDIUQuohgIWDdyDTUsFTPqEXt9Dict5R6k6dXTiCR 5SPKnZ8AgHU+wWTtB+A+XL5h+jbyftuymuaQY/iEESa/0e7xCWIRyk3wRYUKmNch Q5w4tqVzqeZjALKE1Lshaw78+SMf/vKSp09LSIx60hRNpuEXm9H7iALxETsgl8Av ofRD85K0HW18dhVTQoDB3hplqi485lSkkuigTX9R3TkE6iY2XitDJeseSxH/wHml 0alpDMXqv4WNvrLfunZdVqOoLEbuFoYhwhq5EHv94LZoyIacVsd5dx7bg6P3o7sj 3xRXyU3O7fSLc1Qr56+88i99PmbIX68B77V3xrwAJYW8kBGVdNci0ccLuVmlaSdc B3FmLk+MCd2gofNzyYG8lQeXCRM+ElnhAZ+QC0vQhvUETdGXSpA+ZJcph/adaq/j 8im37ibx4oByG3TCk7w3 =y80h -----END PGP SIGNATURE----- Merge tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi into next/arm64 Pull "ARM64: hisilicon: defconfig updates for 4.9" from Wei Xu: - Enable hisilicon SAS and XGE for hip05 and hip06 - Enable drm, powerkey, bluetooth and adv7511/adv7533 for hikey - Add PINCTRL to HISI platform * tag 'hisi-defconfig-for-4.9' of git://github.com/hisilicon/linux-hisi: Kconfig: ARCH_HISI: Add PINCTRL to HISI platform arm64: defconfig: enable bluetooth supports as modules arm64: defconfig: enable CONFIG_INPUT_HISI_POWERKEY for HiKey arm64: defconfig: Enable HiSilicon kirin drm, adv7533 for HiKey arm64: defconfig: Enable Hisi SAS and HNS |
|
|
Arnd Bergmann
|
736ad004f8 |
arm64: tegra: Device tree changes for v4.9-rc1
Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads with the DPAUX to be used to access various audio devices. Furthermore, enable the XUSB controller on Smaug for USB 3.0 support. Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure devices are probed only after their power partitions have been enabled. -----BEGIN PGP SIGNATURE----- iQIwBAABCAAaBQJX0tItExx0cmVkaW5nQG52aWRpYS5jb20ACgkQ3SOs138+s6Em MRAAk1aMxkF0C3As4MDVK9F0fZpSgC6bUJE4d4HXEp6wklIgM8FPC4zPiBEGrkC/ hGeDjCPNdyloE/Uv2FYIQMOBlQRSHYvFR928syTgAIpdTIVL9JDuMSSkWQM+x6Io E9+ydyVVDTqZHlkSP24uRIuWlLLjYg5hgT4jV8PsrVhitxzj9x9cuV+qP/mhIV94 pnizwuGAZ1dzFFAbkJk66a5mcO3aTIRqzLd5HnfCwx7DGHyl62jmdeY90xxivndC VoF8Ez8dWQYKl1UtL3g2Ia3KqKfr+XbBJGmxa4JkEENm06f9XQrdwZNfqWRcDFrl LdpcdVp5Jnq9YBmoBOXm25+gIhF0h5Hk7at1/X8CZ3X6TuRhtEhdxJbvZZT2syKF 55WvdV6jqZrAqxInNgLuvikQzWpIJ08JD6KeTo2umxB1MGZcXkxiarHVZRnIBUni qOcVAA4WEmJh4C3Hc0WKPFgqagbAnIqW1sPzxycqjBufd3TEqykuyXVHlTnZYZB7 dZIyWRXgOoRbCD2Xx1lVe6Vimq0XeUYqWf6y6iqf7bHaFzUMuhWnRQDiPGFn3qkO 7lc/fb+odhKeXMtFhVJ5m1RxObWExVle0N3ThmUOlyM1dWxxdVkwwodP+/Id/+Bt E5NQiCUTrcGz1E8zEJJxcr6MqnJYeAnrXK28Hshj/DCeKiw= =RrBi -----END PGP SIGNATURE----- Merge tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64 Pull "arm64: tegra: Device tree changes for v4.9-rc1" from Thierry Reding: Add a couple of devices (AGIC, ADMA) on Tegra210 and enable them on Smaug. Also enable DPAUX on Smaug to allow the I2C bus that shares pads with the DPAUX to be used to access various audio devices. Furthermore, enable the XUSB controller on Smaug for USB 3.0 support. Finally, select PM_GENERIC_DOMAINS for 64-bit Tegra devices to make sure devices are probed only after their power partitions have been enabled. * tag 'tegra-for-4.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Select PM_GENERIC_DOMAINS arm64: tegra: Enable XUSB controller on Tegra210 Smaug arm64: tegra: Add the various audio devices for Tegra210 Smaug arm64: tegra: Enable DPAUX for Tegra210 Smaug arm64: tegra: Add ACONNECT, ADMA and AGIC nodes Tegra210 Smaug arm64: tegra: Add SOR power-domain for Tegra210 arm64: tegra: Add ADMA node for Tegra210 arm64: tegra: Add AGIC node for Tegra210 arm64: tegra: Drop clock and reset names for XUSB powergates arm64: tegra: Simplify Tegra210 GPIO compatible value |
|
|
Linus Walleij
|
eb8994172a |
Linux 4.8-rc2
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJXsSTlAAoJEHm+PkMAQRiGZaYH/1MarD897Cju7AgQj8UYQYXB dsG3iuoJMj0ji/V466lmHZnS0pwmpJV3qBp7znaFI5jLoTYD2+BkBDY/FLQLqQH7 vkRKOCLCbppKkDDsgd3dS3FFOnJC724iqnSsPegp2lz/8OS2dIs8i82PgKX3zQjJ PqkcMOEt3YlTV18/LiGvQhXWHJ/x8oIvcO0KuLcz3adX0B15+qZyJo1Ss3Z0HL/V CqcSVaLgDe0fAAMCexUcKxRNtvGrMENxYRE9YXJFxu1do2H4opXmt0qGun0yxSN4 8/Y74BB80yUak8lM4mHMCy2G2lDmB32f188yPN45Hg6+F71UJChXXKUnyzUhx14= =QQX1 -----END PGP SIGNATURE----- Merge tag 'v4.8-rc2' into devel Linux 4.8-rc2 |
|
|
York Sun
|
eeb3d68b6c |
EDAC, layerscape: Add Layerscape EDAC support
Add DDR EDAC driver for ARM-based compatible controllers. Both big-endian and little-endian are supported, as specified in device tree. Signed-off-by: York Sun <york.sun@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1471990465-27443-1-git-send-email-york.sun@nxp.com Signed-off-by: Borislav Petkov <bp@suse.de> |
|
|
Jon Hunter
|
988232412e |
arm64: tegra: Select PM_GENERIC_DOMAINS
Enable PM_GENERIC_DOMAINS for 64-bit Tegra devices. This is required to ensure that devices dependent upon a particular power domain are probed only after that power domain has been powered up. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> |
|
|
John Stultz
|
21adc4d7bb |
Kconfig: ARCH_HISI: Add PINCTRL to HISI platform
Things won't work if PINCTRL isn't enabled, so make sure to explicitly set it rather then betting that we have some other platform configed in which selects it. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> |
|
|
Andre Przywara
|
d229d20513 |
arm64: sunxi: Kconfig: add essential pinctrl driver
The pinctrl driver is essential for the Allwinner SoCs to work. Add the driver's config symbol to the Kconfig entry to always compile it in. We can't use the arm approach to make the _driver's_ Kconfig symbol def_bool, because we lack the MACH_* symbols in arm64. That line was in the original pinctrl driver patch, but got removed to avoid the dependency on the Kconfig patch [1]. Also add the general PINCTRL symbol, which isn't selected automatically for the same reason. Reported-by: Jeroen Dekien <dekien@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> [1]: http://lists.infradead.org/pipermail/linux-arm-kernel/2016-March/414086.html Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> |