Commit Graph

81 Commits

Author SHA1 Message Date
Huang Rui c75f52fb26 usb: dwc3: fix typo in comment of dwc3_ep
Change intervall into interval.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:57:01 +03:00
Felipe Balbi 68d6a01bdd usb: dwc3: core: introduce and use macros for Event Size register
That register has more than just the event buffer
size; we can also mask and unmask that particular
interrupter on bit 31 of that register.

In this patch we introduce the necessary macros
and make sure to use the new macros while also
making sure we mask interrupts during driver
removal.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:58 +03:00
Felipe Balbi aff310d91b usb: dwc3: core: don't redefine DWC3_DCFG_LPM_CAP
the macro DWC3_DCFG_LPM_CAP was defined twice.

This patch just removes one of the definitions,
no functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:57 +03:00
Ruchika Kharwar a45c82b84c usb: dwc3: adapt to use dr_mode device tree helper
This patch adapts the dwc3 to use the device tree helper
"of_usb_get_dr_mode" for the mode of operation of the dwc3 instance
being probed.

[ balbi@ti.com : make of_usb_get_dr_mode() conditional on
	dev->of_node and let pdata pass dr_mode too ]

Reviewed-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Ruchika Kharwar <ruchika@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:51 +03:00
Felipe Balbi 5945f789c8 usb: dwc3: switch to GPL v2 only
This is a Linux-only driver which makes use
of GPL-only symbols. It makes no sense to
maintain Dual BSD/GPL licensing for this driver.

Considering that the amount of work to use this
driver in any different operating system would likely
be as large as developing the driver from scratch and
considering that we depend on GPL-only symbols, we
will switch over to a GPL v2-only license.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:44 +03:00
Huang Rui 7bc5a6ba36 usb: dwc3: clean up redundant parameter comment
@list is not as a parameter of dwc3_event_buffer, so remove it in
comments.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:43 +03:00
Huang Rui 1974d494de usb: dwc3: fix wrong bit mask in dwc3_event_type
Per dwc3 2.50a spec, the is_devspec bit is used to distinguish the
Device Endpoint-Specific Event or Device-Specific Event (DEVT). If the
bit is 1, the event is represented Device-Specific Event, then use
[7:1] bits as Device Specific Event to marked the type. It has 7 bits,
and we can see the reserved8_31 variable name which means from 8 to 31
bits marked reserved, actually there are 24 bits not 25 bits between
that. And 1 + 7 + 24 = 32, the event size is 4 byes.

So in dwc3_event_type, the bit mask should be:
is_devspec	[0]		1  bit
type		[7:1]		7  bits
reserved8_31	[31:8]		24 bits

This patch should be backported to kernels as old as 3.2, that contain
the commit 72246da40f "usb: Introduce
DesignWare USB3 DRD Driver".

Cc: <stable@vger.kernel.org>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-15 12:59:56 +03:00
George Cherian d4436c3a6e usb: dwc3: core: fix wrong OTG event regitser offset
This patch fixes the wrong OTG_EVT,OTG_EVTEN and OTG_STS register
offsets.

While at that, also add a missing register to debugfs regdump
utility.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:13 +02:00
Felipe Balbi 789451f6c6 usb: dwc3: calculate the number of endpoints
hwparams2 holds the number of endpoints which
were selected during RTL generation, we can
use that on our driver.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:02 +02:00
Felipe Balbi 7ac6a593d5 usb: dwc3: core: define more revisions
Some new revisions of the DWC3 core have
been released, let's add our defines to help
implementing known erratas.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:57 +02:00
Felipe Balbi fdba5aa54c usb: dwc3: remove our homebrew state mechanism
We can reuse the generic implementation via
our struct usb_gadget.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:13 +02:00
Felipe Balbi 60d04bbee0 usb: dwc3: add count field to event buffer
we can cache the last read value of the event
buffer count register on this field, for later
handling.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:10 +02:00
Felipe Balbi abed411869 usb: dwc3: add a flags field to event buffer
that way we know if a particular event buffer
has pending events, or not.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:10 +02:00
Felipe Balbi 9e86e71bce usb: dwc3: core: remove bogus comment to our structure
that irq field has been removed already. This
patch just removes its documentation.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:09 +02:00
Felipe Balbi 7415f17c95 usb: dwc3: core: add power management support
Add support for basic power management on
the dwc3 driver. While there is still lots
to improve for full PM support, this minimal
patch will already make sure that we survive
suspend-to-ram and suspend-to-disk without
major issues.

Cc: Vikas C Sajjan <vikas.sajjan@linaro.org>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:01 +02:00
Felipe Balbi 9fcb3bd8d1 usb: dwc3: gadget: save state of pullups
This will be used during resume to verify
if we should reconnect our pullups or not.

Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:17:00 +02:00
Vivek Gautam 388e5c5113 usb: dwc3: remove dwc3 dependency on host AND gadget.
DWC3 controller curretly depends on USB && USB_GADGET.
Some hardware may like to use only host feature on dwc3,
or only gadget feature.

So, removing this dependency of USB_DWC3 on USB and USB_GADGET.
Adding the mode of operaiton of DWC3 also here
HOST/GADGET/DUAL_ROLE based on which features are enabled.

[ balbi@ti.com :
	. make sure we have default modes for all possible Kernel
		configurations.
	. Remove the config -> menuconfig change as it's unnecessary
	. switch over to IS_ENABLED() ]

CC: Doug Anderson <dianders@chromium.org>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:55:55 +02:00
Pratyush Anand e5ba5ec833 usb: dwc3: gadget: fix scatter gather implementation
To work with scatter gather properly, fixes have been done in number of
functions. I will explain requirement of each fixes one by one.

start_slot: used to retrieve all request of SG during cleanup

dwc3_gadget_giveback: We need to skip link TRB if it was one of the
intermediate TRB of SG.

dwc3_prepare_one_trb: We need to track all submitted TRBs during
cleanup. Since, all TRBs would be serially allocated, so we can just
keep starting slot info and we can always find rest of them. We need to
pass sg node number, so that we cab appropriately program ISOC_FIRST/ISOC,
Chain etc.

dwc3_prepare_trbs: last_one should be set when it is last node
of SG as well as last node of request_list.

__dwc3_cleanup_done_trbs: It has been prepared after re-factorization of
dwc3_cleanup_done_reqs. It is called for each TRB of SG.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:32:41 +02:00
Pratyush Anand 7efea86c28 usb: dwc3: gadget: fix missed isoc
There are two reasons to generate missed isoc.

1. when the host does not poll for all the data.
2. because of application-side delays that prevent all the data from
being transferred in programmed microframe.

Current code was able to handle first case only.  This patch handles
scenario 2 as well.Scenario 2 sometime may occur with complex gadget
application, however it can be easily reproduced for testing purpose as
follows:

a. use isoc binterval as 1 in f_sourcesink.
b. use pattern=0
c. introduce a delay of 150us deliberately in source_sink_complete, so
that after few frames it lands into scenario 2.
d. now run testusb 16 (isoc in  test). You will notice that if this
patch is not applied then isoc transfer is not able to recover after
first missed.

Current patch's approach is as under:

If missed isoc occurs and there is no request queued then issue END
TRANSFER, so that core generates next xfernotready and we will issue a
fresh START TRANSFER.
If there are still queued request then wait, do not issue either END or
UPDATE TRANSFER, just attach next request in request_list during giveback.
If any future queued request is successfully transferred then we will issue
UPDATE TRANSFER for all request in the request_list.

Cc: <stable@vger.kernel.org> # v3.6 v3.7 v3.8
Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 14:26:59 +02:00
Felipe Balbi d7668024b3 usb: dwc3: debugfs: convert our regdump to use regsets
regset is a generic implementation of regdump
utility through debugfs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:21:34 +02:00
Felipe Balbi 5da9347825 usb: dwc3: decrease event buffer size
Currently we're allocating an entire page to
serve as our event buffer. Provided our events
are 4 bytes long, it's very unlikely we will
even trigger 1k events at once.

Even in the worst case scenario where every
endpoint triggers one event and we still have
a couple of error events, that would still
be less than 40 events.

In order to cope with future versions of the
IP which could (or could not) increase the
amount of possible events to trigger
simultaneously, we're using an arbitrary size
of 64 events for our event buffer.

We're saving 3840 bytes by doing so.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-18 10:11:32 +02:00
Sebastian Andrzej Siewior 124dafde8f usb: dwc3: remove custom unique id handling
The lockless implementation of the unique id is quite impressive (:P)
but dirver's core can handle it, we can remove it and make our code a
little smaller.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-10-31 15:18:52 +02:00
Greg Kroah-Hartman e6d49d093e usb: dwc3: patches for v3.7 merge window
Some much needed changes for our dwc3 driver. First there's a
 rework on the ep0 handling due to some Silicon issue we uncovered
 which affects all users of this IP core (there's a missing
 XferNotReady(DATA) event in some conditions). This issue which
 show up as a SETUP transfers which wouldn't complete ever and
 we would fail TD 7.06 of the Link Layer Test from USB-IF and
 Lecroy's USB3 Exerciser.
 
 We also fix a long standing bug regarding EP0 enable sequencing
 where we weren't setting a particular bit (Ignore Sequence
 Number). Since we never saw any problems caused by that, it
 didn't deserve being sent to stable tree.
 
 On this pull request we also fix Burst Size initialization which
 should be done only in SuperSpeed and we were mistakenly setting
 Burst Size to the maximum value on non-SuperSpeed mode. Again,
 since we never saw any problems caused by that, we're not sending
 this patch to stable.
 
 There's also a memory ordering fix regarding usage of bitmaps in
 dwc3 driver.
 
 You will also find some sparse warnings fix, a fix for missed
 isochronous packets when the endpoint is already busy, and a
 fix for synchronization delay on dwc3_stop_active_transfer().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQThLOAAoJEIaOsuA1yqREPB0P/igbry8UxYEfFA6+ojRmeS3x
 AztAUUixXsl44lQOLtl/VSuKqvhiIJ7VniBgL+nj1HdeJPMG6bdjBLwl2LjYBCQq
 xZbv07isqHqg8ntiGwOADQztU7p4BPGpDztogsTlNjUhclCvUwE9ZTf4Moe7Cnk8
 TePUypvt3WQceWBpZxMd9Zirpmls0UTUW287OgQ+ik6QccokzQXxfzD5z3tS0bwo
 nRjWReihPJU68p5wcbILjo4VmhBsllYrRxB8CIatqxfjj6OssJ0ifcO6+jn7bnc5
 T8OStPK8FigTLdNuV4sx3MCu9ItSY1+Y+gRnfXpdbkEqU303qI/rOC0jnmEhAhr1
 /mS9llhCkfknpvL/DSlQnYzwfNA4wFjTLNoxOEDNkYNE84T+YAfZI1DGBvwJoYlZ
 NELQTJB2enVADmMyOwQcXwx7wu2uW7Sb6FcbYpIsZyADZVJPqtjG1o09d19xL0z5
 YdP23D/A6/I6SySvW8cDy9F3ouCQfrkeEd71KF2+4s7zHZhU9cqFA65xOZ7FRB++
 nUsTHCn07doqp+5vsRLV0BKPk3YH9mEg0aVv4ClSE57wZFPFAqXU5GtEgJ9mBAnv
 3poV22oTvGdWuG3vzAAk83pnQPyxxv4DgDLc3gaKZXhecLDRp0O4uucuHrmyV5tn
 eynhmX9bDB5hLGN5KJtX
 =Lqwl
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: patches for v3.7 merge window

Some much needed changes for our dwc3 driver. First there's a
rework on the ep0 handling due to some Silicon issue we uncovered
which affects all users of this IP core (there's a missing
XferNotReady(DATA) event in some conditions). This issue which
show up as a SETUP transfers which wouldn't complete ever and
we would fail TD 7.06 of the Link Layer Test from USB-IF and
Lecroy's USB3 Exerciser.

We also fix a long standing bug regarding EP0 enable sequencing
where we weren't setting a particular bit (Ignore Sequence
Number). Since we never saw any problems caused by that, it
didn't deserve being sent to stable tree.

On this pull request we also fix Burst Size initialization which
should be done only in SuperSpeed and we were mistakenly setting
Burst Size to the maximum value on non-SuperSpeed mode. Again,
since we never saw any problems caused by that, we're not sending
this patch to stable.

There's also a memory ordering fix regarding usage of bitmaps in
dwc3 driver.

You will also find some sparse warnings fix, a fix for missed
isochronous packets when the endpoint is already busy, and a
fix for synchronization delay on dwc3_stop_active_transfer().
2012-09-11 13:52:48 -07:00
Felipe Balbi 51e1e7bcef usb: dwc3: add basic PHY support
this will let us control PHYs on platforms which
need them.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-09-10 19:29:43 +03:00
Felipe Balbi 4635d3f298 usb: dwc3: ep0: drop dead code
There's no such thing as XferNotReady(SETUP), we
can safely drop all that code with no problems
whatsoever.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-03 09:28:25 +03:00
Felipe Balbi b4996a8631 usb: dwc3: rename res_trans_idx to resource_index
resource_index is more human readable. No
functional changes.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-25 14:00:45 +03:00
Pratyush Anand 7e39b817ee usb: dwc3: Correct DWC3_DCTL_HIRD_THRES definition
The definition of DWC3_DCTL_HIRD_THRES macro is
completely wrong. It will only work for when we
want to read the register's contents for that bitfield.

Change the macro so that it can be used to writing to
the register, and when we need to read, we can add
extra right shift of 24 bits.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>

[ balbi@ti.com: add a commit log ]

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-06 16:56:10 +03:00
Pratyush Anand d6d6ec7b88 usb: dwc3: Fix missed isoc IN transaction
If an IN transfer is missed on isoc endpoint, then driver must insure
that next ep_queue is properly handled.
This patch fixes this issue by starting a new transfer for next queued
request.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:23:04 +03:00
Pratyush Anand d05b81824e USB: DWC3: Correct DWC3_DSTS_SOFFN_MASK definition
SOF Number is bit16:3 of DSTS. Correct the mask accordingly.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:17:29 +03:00
Pratyush Anand 389f2828bb USB: DWC3: Correct DWC3_TRB_SIZE_TRBSTS definition
Correct  define for DWC3_TRB_SIZE_TRBSTS.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-04 18:17:20 +03:00
Paul Zimmerman 2c61a8efce usb: dwc3: add definitions for new registers
This patch adds definitions for some new registers that have been
added to later versions of the controller, up to v2.10a.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-06-03 23:08:21 +03:00
Greg Kroah-Hartman 23063b378d usb: dwc3: patches for v3.5 merge window
This pull request contains one workaround for a Silicon
 Issue found on all RTL releases prior to 2.20a, which
 would cause a metastability state on Run/Stop bit.
 
 We also have some patches implementing a few extra Standard
 requests introduced by USB3 spec (Set SEL and Set Isoch Delay),
 as well as one patch, which has been pending for a long time,
 implementing LPM support.
 
 Last, but not least, we are splitting the host address space
 out of the dwc3 core driver otherwise xHCI won't be able to
 request_mem_region() its own address space. This patch is
 only needed because we are (as we should) re-using the xHCI
 driver, which is a completely separate module.
 
 Together with these three big changes, come a few extra preparatory
 patches which most move code around, define macros and so on, as
 well as a fix for Isochronous transfers which hasn't been triggered
 before.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPo7lXAAoJEIaOsuA1yqRESaIP/AgxZIfOAUbPx0GWLnhub3qr
 SxaUplweFc9q4KXRLn0kGdY9QArPR3bqW9g8KOTiRCBYRtjpACyMjibAUaAht81h
 +vLdPt87Slj2c14t1uguWFvgCUYQOCugkVvDIjRg9PCLIuTahm4cIBFqL3RJOHFf
 9WCd8JjH9ahr85ZtoCBk9B5bDNn71nS+Yh6/8+Ab90AE4vZ6t8Xx3+wLTHy2CBYQ
 UH1o61QZreAJ0J3OiUobjqrVbYwz6TM0dFYMjA6ko+OiPRhVOj8/C8aNl/U1whRm
 +7jjJiWO9aHp+Tu2OAQOBF6ydc3ZLBEiCl9RiE+O9MppmtOykzkTHFm1ZXatCEY7
 UUYOy43VXLNlHoz8nidNw6P25hAwwlSijzlyawpihKbIaE8le2MpE6I00AlciM2q
 BEo4LpluC8Rr6CUUr5W9dPZUexRlzxdAL5nQSJUnJgfEPphpP3x7dWTxUZBaWjq6
 akqjgGqVj1QKwMnqL4GILtRgdqWj6WYrw67fYVLHqj8QQla4cgXQ2sHp9/R0imvT
 nmjiL5ZiuIWWr965DgVHZwqIkdvMpSQb99a1xmptw8lFDGkVJDCssPDdEErbBMwy
 KmOSaqKeg/Yway05i+Pwo/NUKHQSZeiyuguzniMrF7iYFF1/2hVYRgfpH4V+95w/
 Xrnz4uH2YJGQGPddf87P
 =qgf/
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: patches for v3.5 merge window

This pull request contains one workaround for a Silicon
Issue found on all RTL releases prior to 2.20a, which
would cause a metastability state on Run/Stop bit.

We also have some patches implementing a few extra Standard
requests introduced by USB3 spec (Set SEL and Set Isoch Delay),
as well as one patch, which has been pending for a long time,
implementing LPM support.

Last, but not least, we are splitting the host address space
out of the dwc3 core driver otherwise xHCI won't be able to
request_mem_region() its own address space. This patch is
only needed because we are (as we should) re-using the xHCI
driver, which is a completely separate module.

Together with these three big changes, come a few extra preparatory
patches which most move code around, define macros and so on, as
well as a fix for Isochronous transfers which hasn't been triggered
before.

[ resolved conflicts and build error in drivers/usb/dwc3/gadget.c - gregkh]
2012-05-07 10:09:55 -07:00
Ido Shayevitz 16e78db720 usb: dwc3: Update dwc3 udc to use usb_endpoint_descriptor inside the struct usb_ep
Remove redundant pointer to struct usb_endpoint_descriptor.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04 15:52:52 +03:00
Felipe Balbi 3ef35fafdc usb: dwc3: define DWC3_EP0_BOUNCE_SIZE
to avoid sprinkling magic constants on the driver
we define a constant to be used when allocating
setup_buffer and ep0_bounce buffer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04 12:58:14 +03:00
Felipe Balbi c12a0d862a usb: dwc3: ep0: implement support for Set Isoch Delay request
This is basically a noop for DWC3. We don't have
to do anything. Basically we test if the request
parameters are correct, cache the Isochronous
Delay and return success.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-02 09:43:09 +03:00
Felipe Balbi 865e09e716 usb: dwc3: ep0: implement Set SEL support
This patch implements Set SEL Standard Request
support for dwc3 driver. It needs to issue a command
to the controller passing the timing we received on
the data phase of the Set SEL request.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-02 09:43:08 +03:00
Felipe Balbi b09bb64239 usb: dwc3: gadget: implement Global Command support
This will be used by the ep0 layer for implementing
Set SEL Standard Request.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-02 09:42:56 +03:00
Sebastian Andrzej Siewior e6a3b5e288 usb: dwc3: ep0: add LPM handling
On device loading the driver enables LPM and the acceptance of U1 and U2
states. The [Set|Clear]Feature requests for "U1/U2" are forwarded
directly to the hardware and allow / forbid the initiation of the low
power links.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-04-30 11:31:21 +03:00
Ido Shayevitz 51249dca62 usb: dwc3: core: split host address space
This fix prevents a problem with dwc3 and host mode where
we were requesting the entire memory region in dwc3/core.c,
thus preventing xhci-plat from ever ioremapping its own address space.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-04-24 15:37:04 +03:00
Felipe Balbi 1522d7034d usb: dwc3: core: define more revision macros
We have other revisions already released, let's
define revision macros for those so we can do
runtime detection of known erratas.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-04-11 13:12:16 +03:00
Greg Kroah-Hartman 3d71769014 usb: dwc3: changes for v3.4 merge window
Here are the changes for v3.4 merge window.
 
 It includes a new glue layer for Samsung's Exynos platform, a simplification of
 memory management on DWC3 driver by using dev_xxx functions, a few
 optimizations to IRQ handling by dropping memcpy() and using bitshifts, a fix
 for TI's OMAP5430 TX Fifo Allocation, two fixes on USB2 test mode
 implementation (one on debugfs and one on ep0), and several minor changes such
 as whitespace cleanups, simplification of a few parts of the code, decreasing a
 long delay to something a bit saner, dropping a header which was included twice
 and so on.
 
 The highlight on this merge is the support for Samsung's Exynos platform,
 increasing the number of different users for this driver to three.
 
 Note that Samsung Exynos glue layer will only compile on platforms which
 provide implementation for the clk API for now. Once Samsung supports
 pm_runtime, that limitation can be dropped from the Makefile.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPUJ2bAAoJEIaOsuA1yqREwOgP/2bG6rvPBMlGmXvvR40HNUXJ
 jXzkXcrTBrO172Fxl2P+mAgNFggMURrOdiyXwl7+2Ib0NM7sS9jwikuxos8DwuQv
 Ci0GgJtQySORIl5Sw29uB1W65aV2ieNBh/fN/52LwVOQYITt89GYK1DsRUWRN2V/
 0bw3OepckiAFN5gWRykIYIUXZs8DQa+L1qYc6fexZk7zZ+XrjdNba8RzGzsyUelD
 BB0eOj4E2Mda6Yp7kyiBRuTXVAUChNa5J0iCvXSnR8l2wppfXlmD2UD4Sfo/yxd5
 q25/rm1e1A4iKcPjSkhzTayQKrLWEgCxZK69sZXlEPG9qhA3iMjWDNBvEy6cV4bc
 bFFjwXAObX+bm+QDYqcD66iUZTPzEW149W/e5B7+XGk09NcCs/wqoA1jEgCLEHnv
 3rsG0RvsgtMdwmBYpO8zrhJPTFa6NAq9Qc4nLj3WefXP9Vkl5gpfneIcgYKB6x0q
 LHRQsLHBWl/hXClWAPflDJaGQqEt6hjkA3IqV03yTlMNuYxDNJy931J6Cz9a9Lu5
 Gr2By/bHVcADmt8WzituQsnLvQIzLLGl0U0lKpdl24I52roqMkZVj7XaWDojLVSq
 HZnbk+c3PdEXVIDNCz1QnCY/QojEhKkeR23LP3YD8L9KxcOu8DNyL1RKdYqx3Cnv
 vrqerutPusT6kGvaRQIk
 =4Z2+
 -----END PGP SIGNATURE-----

Merge tag 'dwc3-for-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

usb: dwc3: changes for v3.4 merge window

Here are the changes for v3.4 merge window.

It includes a new glue layer for Samsung's Exynos platform, a simplification of
memory management on DWC3 driver by using dev_xxx functions, a few
optimizations to IRQ handling by dropping memcpy() and using bitshifts, a fix
for TI's OMAP5430 TX Fifo Allocation, two fixes on USB2 test mode
implementation (one on debugfs and one on ep0), and several minor changes such
as whitespace cleanups, simplification of a few parts of the code, decreasing a
long delay to something a bit saner, dropping a header which was included twice
and so on.

The highlight on this merge is the support for Samsung's Exynos platform,
increasing the number of different users for this driver to three.

Note that Samsung Exynos glue layer will only compile on platforms which
provide implementation for the clk API for now. Once Samsung supports
pm_runtime, that limitation can be dropped from the Makefile.

Conflicts:
	drivers/usb/dwc3/gadget.c
2012-03-02 15:56:33 -08:00
Paul Zimmerman 3e87c42a29 usb: dwc3: replace hard-coded constant in DWC3_GCTL_SCALEDOWN(3)
Define DWC3_GCTL_SCALEDOWN_MASK and use it in place of
DWC3_GCTL_SCALEDOWN(3).

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:06 +02:00
Paul Zimmerman 1d04679395 usb: dwc3: clean up whitespace damage, typos, missing parens, etc.
trivial patch, no functional changes

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-02 12:12:01 +02:00
Felipe Balbi 0fc9a1be09 usb: dwc3: gadget: use generic map/unmap routines
those routines have everything we need to map/unmap
USB requests and it's better to use them.

In order to achieve that, we had to add a simple
change on how we allocate and use our setup buffer;
we cannot allocate it from coherent anymore otherwise
the generic map/unmap routines won't be able to easily
know that the GetStatus request already has a DMA
address.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-28 14:48:54 +02:00
Felipe Balbi f6bafc6a1c usb: dwc3: convert TRBs into bitshifts
this will get rid of a useless memcpy on
IRQ handling, thus improving driver performance.

Tested with OMAP5430 running g_mass_storage on
SuperSpeed and HighSpeed.

Note that we are removing the little endian access
of the TRB and all accesses will be in System endianness,
if there happens to be a system in BE, bit 12 of GSBUSCFG0
should be set so that HW does byte invariant BE accesses
when fetching TRBs.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-13 16:02:06 +02:00
Gerard Cauvy 3b637367ae usb: dwc3: ep0: fix SetFeature(TEST)
When host requests us to enter a test mode,
we cannot directly enter the test mode before
Status Phase is completed, otherwise the core
will never be able to deliver the Status ZLP
to host, because it has already entered the
requested Test Mode.

In order to fix the error, we move the actual
start of Test Mode right after we receive
Transfer Complete event of the status phase.

Signed-off-by: Gerard Cauvy <g-cauvy1@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-10 13:11:46 +02:00
Felipe Balbi 8db7ed15f2 usb: dwc3: gadget: start core on Rx.Detect
When we set Run/Stop bit, we also move the
core to Rx.Detect state so that USB3 handshake
can start from a known location.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:36 +02:00
Felipe Balbi 457e84b662 usb: dwc3: gadget: dynamically re-size TxFifos
We need to dynamically re-size TxFifos for the
cases where default values will not do.

While at that, we create a simple function which,
for now, will just allocate one full packet fifo
space for each of the enabled endpoints.

This can be improved later in order to allow for
better throughput by allocating more space for
endpoints which could make good use of that like
isochronous and bulk.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:34 +02:00
Felipe Balbi 40aa41fba3 usb: dwc3: gadget: fix XferNotReady debug print
Only bit 3 of the event status bitfield is valid
and the others should not be considered.

Make sure SW matches documentation on that case
to avoid bogus debugging prints which would
confuse an engineer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:28 +02:00
Felipe Balbi c90bfaece9 usb: dwc3: gadget: fix stream enable bit
ep->max_streams is a mere hint to the gadget
driver that 'ep' supports stream handling. Using
that as a decision variable for enabling streams
was my worst brain-fart to date.

Instead, we should check from the Superspeed
Endpoint Companion Descriptor if the endpoint
has requested streams. For that we need a little
re-factoring but it is now correct.

Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:47 +02:00