Required for vmalloc_32 and vfree declarations on non-x86 platforms.
Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver is not needed, as the existing mos7840 driver works
properly for this device.
Thanks to Russell Lang for doing the work to figure this out.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I'm about to merge "oom: move oom_adj value from task_struct to
mm_struct", and this fixup is needed to repair linux-next's
drivers/staging/android/lowmemorykiller.c.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
a standard memory leak, as later allocations may fail even if prior
allocations did not. Then the prior allocations must be undone.
Signed-off-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
tty_port_tty_get() was called without a corresponding tty_kref_put()
in qt_read_bulk_callback() and qt_close().
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
Staging: stlc45xx: convert config_interface to bss_info_changed, fixing a build error
Staging: comedi: s626: use subvendor:subdevice ids for SAA7146 board
Staging: prevent rtl8192su from crashing dev_ioctl in SIOCGIWNAME
Staging: prevent rtl8187se from crashing dev_ioctl() in SIOCGIWNAME
Staging: rtl8192su: convert to net_device_ops
Staging: serqt_usb2: declare qt_open static in serqt_usb2
Staging: serqt_usb2: fix qt_close parameters in serqt_usb2
Staging: comedi: jr3_pci.c: add required includes
Staging: meilhaus: add email address to TODO
Staging: rspiusb: use NULL virtual address instead of a bogus one
Staging: vt6655: compile fix
Staging: rt2870: Add USB ID for Sitecom WL-608
See commit 2d0ddec5b2 (mac80211: unify config_interface and
bss_info_changed)
This fixes a build error.
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current s626 comedi driver in staging conflicts with philips SAA7146
media/dvb based cards, because it claims the same vendor:device pci id
for all subdevice/subvendor ids. What happens is that for people that have a
philips SAA7146 media/dvb based card, s626 if available gets loaded by udev
and makes system freeze (https://qa.mandriva.com/show_bug.cgi?id=51445).
The s626 driver shouldn't claim all 1131:7146 devices. Fix this by
specifying specific known subvendor:subdevice ids in its pci id table
list.
Also s626_attach is modified to use now pci_get_subsys instead of
pci_get_device as reported by Ian Abbott, and now we loop over pci id
table entries in case more ids are added in the future.
Reference: http://lkml.org/lkml/2009/6/16/552
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(adapted from the rtl8187se patch)
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17
This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.
It can be applied to 2.6.30-stable as well.
Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I repeatedly get __stack_chk_fail panic()s with this driver before
applying the attached fix.
ieee80211_wx_get_name() ignores sizeof(wrqu->name) which is IFNAMSIZ (16), and
on certain conditions, the concatenated string will be larger than IFNAMSIZ
including the terminating zero.
length ("802.11" ++ "b" ++ "/g" ++ " linked" ++ "\x00") == 17
This fix uses strl{cpy,cat} in addition to the reduction of the total
possible length of the output string by a char.
It can be applied to 2.6.30-stable as well.
Signed-off-by: Dan Aloni <dan@aloni.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
commit e3804cbebb removed
COMPAT_NET_DEV_OPS so this change is needed to make rtl8192su
buildable again.
Loosely based on Alexander's patch for rtl8187se, untested.
Cc: Alexander Beregalov <a.beregalov@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The parameter list for qt_close() was from the old non usb-serial
driver.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build errors:
jr3_pci.c:739: error: 'jiffies' undeclared
jr3_pci.c:748: error: implicit declaration of function 'msecs_to_jiffies'
jr3_pci.c:763: error: implicit declaration of function 'add_timer'
jr3_pci.c:790: error: implicit declaration of function 'init_timer'
jr3_pci.c:951: error: implicit declaration of function 'del_timer_sync'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Meilhaus Support also wants to be notified of changes to these drivers.
Cc: David Kiliani <mail@davidkiliani.de>
Cc: Meilhaus Support <support@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The main problem here is that I just cannot see how this could ever
be correct:
usb_fill_bulk_urb(pdx->PixelUrb[frameInfo][i], pdx->udev, epAddr,
(dma_addr_t *) sg_dma_address(&pdx->sgl[frameInfo][i]),
sg_dma_len(&pdx->sgl[frameInfo][i]),
You cannot take a DMA address, cast it to a _pointer to_ a DMA address,
and then regard it as a virtual address of the transfer buffer.
However, finding the right virtual address was too hard for me,
so I just stubbed it with NULL. At least usbmon won't oops then
(it will not show any data but it's better than crashing).
Also, too big a buffer was allocated elsewhere.
And since we're at it, drop clearly unnecessary usb_buffer_alloc too,
leaving it where it may be useful.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the USB id 0x0DF6,0x003F to the rt2870.h file such that the
Sitecom WL-608 device will be recognized by this driver.
Signed-off-by: Jorrit Schippers <jorrit@ncode.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The existing code had the following race:
Thread-1 Thread-2
inc/read in_use
inc/read in_use
inc tx_free_list[qos].len
inc tx_free_list[qos].len
The actual in_use value was incremented twice, but thread-1 is going
to free memory based on its stale value, and will free one too many
times. The result is that memory is freed back to the kernel while
its packet is still in the transmit buffer. If the memory is
overwritten before it is transmitted, the hardware will put a valid
checksum on it and send it out (just like it does with good packets).
If by chance the TCP flags are clobbered but not the addresses or
ports, the result can be a broken TCP stream.
The fix is to track the number of freed packets in a single location
(a Fetch-and-Add Unit register). That way it can never get out of sync
with itself.
We try to free up to MAX_SKB_TO_FREE (currently 10) buffers at a time.
If fewer are available we adjust the free count with the difference.
The action of claiming buffers to free is atomic so two threads cannot
claim the same buffers.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Convert the driver to use net_device_ops as it is now mandatory.
Also compensate for the removal of struct sk_buff's dst field.
The changes are mostly mechanical, the content of ethernet-common.c
was moved to ethernet.c and ethernet-common.{c,h} are removed.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the replicated urban legends from the comments and fix a couple of
other silly calls
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some of the comedi drivers need timer.h to build properly, so put it
in the comedidev.h file to fix these errors.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are others remaining due to the __iomem namespace of the
framebuffer data pointer.
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up a bunch of checkpatch.pl warnings in the udlfb.c file.
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up a bunch of checkpatch.pl warnings in the udlfb.h file.
Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the udlfb driver, a framebuffer driver for DisplayLink devices.
From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These comments contribute nothing to the code, and most were just cut
and pasted from another driver.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are not needed, and the version one was pointless now that the code
is merged into the tree.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use dev_dbg() instead.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The "in_module_init" flag was wrong, so just remove it, it's not needed.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
struct ata_port_info shouldn't be const, so remove that which fixes up
the compiler warnings.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use the PCI_DEVICE macro, that's what it is there for...
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move code around so we do not need the function prototypes anymore.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes a number of coding style issues in the pata_rdc.h file
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes build problems in the pata_rdc driver due to api changes in
the libata layer.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is our IDE Source code. This is base on kernel 2.6.28. pata_rdc.h
and pata_rdc.c
From: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that Bill rewrote the driver "properly", this old thing can be removed.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the serqt_usb driver rewritten to use usb-serial.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
While access file_ext->state, we should use device_lock to protect it. The
original codes miss this in some places.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
schedule_work returns 0, if the work is already on the work_queue, else
returns non-zero. Do not print error message if heci_bh_handlerwork was
already on queue.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Amit Kucheria