It is more preffered to use the dev_* family of macros instead of using
the generic pr_*.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modify ppdev driver to use the new parallel port device model.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For alignment we should use tab in all possible places.
checkpatch was complaining for using space before tab.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch was complaining that the alignment was not matching with the
open parenthesis.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For single statement if and else blocks we do not need braces.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch was complaining about space around the pointer.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch was complaining about space between function name and open
parenthesis.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_NWBUTTON_REBOOT is disabled, we get a warning about
an unused variable:
drivers/char/nwbutton.c:37:12: warning: 'reboot_count' defined but not used [-Wunused-variable]
static int reboot_count = NUM_PRESSES_REBOOT; /* Number of presses to reboot */
Using if(IS_ENABLED()) instead of #ifdef around the user makes the
code nicer to read and avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The arg of ioctl in ppdev is the pointer of integer except the
timeval in PPSETTIME, PPGETTIME. Different size of timeval
is already supported by the previous patches. So, it is safe
to add compat support.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The y2038 issue for ppdev is changes of timeval in the ioctl
(PPSETTIME and PPGETTIME). The size of struct timeval changes from
8bytes to 16bytes due to the changes of time_t. It lead to the
changes of the command of ioctl, e.g. for PPGETTIME, We have:
on 32-bit (old): 0x80087095
on 32-bit (new): 0x80107095
on 64-bit : 0x80107095
This patch define these two ioctl commands to support the 32bit
and 64bit time_t application at the same time. And, introduce
pp_set_timeout to remove some duplicated code.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some array of const char are not set as const.
This patch fix that.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlayLO0ACgkQIXnXXONXERcDKwCeMsgPWCtDA8tIOawNY9MhJFsE
F30AoJFCqUny4Sc/T6/+bBB5l3zPTlUy
=Zzrb
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI fix from Corey Minyard:
"Fix a compile error on IPMI when ACPI is disabled"
* tag 'for-linus-4.5-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: put acpi.h with the other headers
Enclosing '#include <linux/acpi.h>' within '#ifdef CONFIG_ACPI' is
unnecessary, since it has its own conditional compile for CONFIG_ACPI.
Commit 0fbcf4af7c ("ipmi: Convert the IPMI SI ACPI handling to a
platform device") exposed this as a problem for platforms that do not
support ACPI when it introduced a call to ACPI_PTR() macro outside of
the CONFIG_ACPI conditional compile. This would have been perfectly
acceptable if acpi.h were not conditionally excluded for the non-acpi
platform, because the conditional compile within acpi.h defines
ACPI_PTR() to return NULL when compiled for non acpi platforms.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Fixed commit reference in header to conform to standard.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Not every arch has io memory.
So, unbreak the build by fixing the dependencies.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull final vfs updates from Al Viro:
- The ->i_mutex wrappers (with small prereq in lustre)
- a fix for too early freeing of symlink bodies on shmem (they need to
be RCU-delayed) (-stable fodder)
- followup to dedupe stuff merged this cycle
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: abort dedupe loop if fatal signals are pending
make sure that freeing shmem fast symlinks is RCU-delayed
wrappers for ->i_mutex access
lustre: remove unused declaration
There are many locations that do
if (memory_was_allocated_by_vmalloc)
vfree(ptr);
else
kfree(ptr);
but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr(). Unless callers have special reasons, we can
replace this branch with kvfree(). Please check and reply if you found
problems.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull core block updates from Jens Axboe:
"We don't have a lot of core changes this time around, it's mostly in
drivers, which will come in a subsequent pull.
The cores changes include:
- blk-mq
- Prep patch from Christoph, changing blk_mq_alloc_request() to
take flags instead of just using gfp_t for sleep/nosleep.
- Doc patch from me, clarifying the difference between legacy
and blk-mq for timer usage.
- Fixes from Raghavendra for memory-less numa nodes, and a reuse
of CPU masks.
- Cleanup from Geliang Tang, using offset_in_page() instead of open
coding it.
- From Ilya, rename request_queue slab to it reflects what it holds,
and a fix for proper use of bdgrab/put.
- A real fix for the split across stripe boundaries from Keith. We
yanked a broken version of this from 4.4-rc final, this one works.
- From Mike Krinkin, emit a trace message when we split.
- From Wei Tang, two small cleanups, not explicitly clearing memory
that is already cleared"
* 'for-4.5/core' of git://git.kernel.dk/linux-block:
block: use bd{grab,put}() instead of open-coding
block: split bios to max possible length
block: add call to split trace point
blk-mq: Avoid memoryless numa node encoded in hctx numa_node
blk-mq: Reuse hardware context cpumask for tags
blk-mq: add a flags parameter to blk_mq_alloc_request
Revert "blk-flush: Queue through IO scheduler when flush not required"
block: clarify blk_add_timer() use case for blk-mq
bio: use offset_in_page macro
block: do not initialise statics to 0 or NULL
block: do not initialise globals to 0 or NULL
block: rename request_queue slab cache
Pull security subsystem updates from James Morris:
- EVM gains support for loading an x509 cert from the kernel
(EVM_LOAD_X509), into the EVM trusted kernel keyring.
- Smack implements 'file receive' process-based permission checking for
sockets, rather than just depending on inode checks.
- Misc enhancments for TPM & TPM2.
- Cleanups and bugfixes for SELinux, Keys, and IMA.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (41 commits)
selinux: Inode label revalidation performance fix
KEYS: refcount bug fix
ima: ima_write_policy() limit locking
IMA: policy can be updated zero times
selinux: rate-limit netlink message warnings in selinux_nlmsg_perm()
selinux: export validatetrans decisions
gfs2: Invalid security labels of inodes when they go invalid
selinux: Revalidate invalid inode security labels
security: Add hook to invalidate inode security labels
selinux: Add accessor functions for inode->i_security
security: Make inode argument of inode_getsecid non-const
security: Make inode argument of inode_getsecurity non-const
selinux: Remove unused variable in selinux_inode_init_security
keys, trusted: seal with a TPM2 authorization policy
keys, trusted: select hash algorithm for TPM2 chips
keys, trusted: fix: *do not* allow duplicate key options
tpm_ibmvtpm: properly handle interrupted packet receptions
tpm_tis: Tighten IRQ auto-probing
tpm_tis: Refactor the interrupt setup
tpm_tis: Get rid of the duplicate IRQ probing code
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlaVbiAACgkQIXnXXONXERe0zQCgp2d1kiTLrbGh1XwqR2JFQ4eu
AYwAnRviufs2kK75eoRFkuxpcd/QOehl
=r1TY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.5' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Some minor changes that have been in linux-next for a while"
* tag 'for-linus-4.5' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: Remove unnecessary pci_disable_device.
char: ipmi: Drop owner assignment from i2c_driver
ipmi: constify some struct and char arrays
- bd_acquire() and bd_forget() open-code bdgrab() and bdput()
- raw driver uses igrab() but never checks its return value and always
holds another ref from bind_set() while calling it, so it's
equivalent to bdgrab()
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
We call cleanup_one_si from ipmi_pci_remove, which calls ->addr_source_cleanup,
which gets set to point to ipmi_pci_cleanup, which does a pci_disable_device.
On return from this, we do a second pci_disable_device, which
results in the trace below.
ipmi_si 0000:00:16.0: disabling already-disabled device
Call Trace:
[<ffffffff818ce54c>] dump_stack+0x45/0x57
[<ffffffff810525f7>] warn_slowpath_common+0x97/0xe0
[<ffffffff810526f6>] warn_slowpath_fmt+0x46/0x50
[<ffffffff81497ca1>] pci_disable_device+0xb1/0xc0
[<ffffffffa00851a5>] ipmi_pci_remove+0x25/0x30 [ipmi_si]
[<ffffffff8149a696>] pci_device_remove+0x46/0xc0
[<ffffffff8156801f>] __device_release_driver+0x7f/0xf0
[<ffffffff81568978>] driver_detach+0xb8/0xc0
[<ffffffff81567e50>] bus_remove_driver+0x50/0xa0
[<ffffffff8156914e>] driver_unregister+0x2e/0x60
[<ffffffff8149a3e5>] pci_unregister_driver+0x25/0x90
[<ffffffffa0085804>] cleanup_ipmi_si+0xd4/0xf0 [ipmi_si]
[<ffffffff810c727a>] SyS_delete_module+0x12a/0x200
[<ffffffff818d4d72>] system_call_fastpath+0x12/0x17
Signed-off-by: Dave Jones <dsj@fb.com>
Lots of char arrays could be set as const since they contain only literal
char arrays.
We could in the same time make const some struct members who are pointer
to those const char arrays.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
TPM2 supports authorization policies, which are essentially
combinational logic statements repsenting the conditions where the data
can be unsealed based on the TPM state. This patch enables to use
authorization policies to seal trusted keys.
Two following new options have been added for trusted keys:
* 'policydigest=': provide an auth policy digest for sealing.
* 'policyhandle=': provide a policy session handle for unsealing.
If 'hash=' option is supplied after 'policydigest=' option, this
will result an error because the state of the option would become
mixed.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Added 'hash=' option for selecting the hash algorithm for add_key()
syscall and documentation for it.
Added entry for sm3-256 to the following tables in order to support
TPM_ALG_SM3_256:
* hash_algo_name
* hash_digest_size
Includes support for the following hash algorithms:
* sha1
* sha256
* sha384
* sha512
* sm3-256
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
When the TPM response reception is interrupted in the wait_event_interruptable
call, the TPM is still busy processing the command and will only deliver the
response later. So we have to wait for an outstanding response before sending
a new request to avoid trying to put a 2nd request into the CRQ. Also reset
the res_len before sending a command so we will end up in that
wait_event_interruptable() waiting for the response rather than reading the
command packet as a response.
The easiest way to trigger the problem is to run the following
cd /sys/device/vio/71000004
while :; cat pcrs >/dev/null; done
And press Ctrl-C. This will then display an error
tpm_ibmvtpm 71000004: tpm_transmit: tpm_recv: error -4
followed by several other errors once interaction with the TPM resumes.
tpm_ibmvtpm 71000004: A TPM error (101) occurred attempting to determine the number of PCRS.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Ashley Lai <ashley@ashleylai.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
auto-probing doesn't work with shared interrupts, and the auto detection
interrupt range is for x86 only.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Now that the probe and run cases are merged together we can use a
much simpler setup flow where probe and normal setup are done with
exactly the same code.
Since the new flow always calls tpm_gen_interrupt to confirm the IRQ
there is also no longer any need to call tpm_get_timeouts twice.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
The new code that works directly in tpm_tis_send is able to handle
IRQ probing duties as well, so just use it for everything.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
IRQ probing needs to know that the TPM is working before trying to
probe, so move tpm_get_timeouts() to the top of the tpm_tis_init().
This has the advantage of also getting the correct timeouts loaded
before doing IRQ probing.
All the timeout handling code is moved to tpm_get_timeouts() in order to
remove duplicate code in tpm_tis and tpm_crb.
[jarkko.sakkinen@linux.intel.com: squashed two patches together and
improved the commit message.]
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
This should be done very early, before anything could possibly
cause the TPM to generate an interrupt. If the IRQ line is shared
with another driver causing an interrupt before setting up our
handler will be very bad.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Tested-by: Scot Doyle <lkml14@scotdoyle.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
The interrupt is always allocated with devm_request_irq so it
must always be freed with devm_free_irq.
Fixes: 448e9c55c1 ("tpm_tis: verify interrupt during init")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Those are stupid and code should use static_cpu_has_safe() or
boot_cpu_has() instead. Kill the least used and unused ones.
The remaining ones need more careful inspection before a conversion can
happen. On the TODO.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1449481182-27541-4-git-send-email-bp@alien8.de
Cc: David Sterba <dsterba@suse.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We encountered a panic on boot in ipmi_si on a dell per320 due to an
uninitialized timer as follows.
static int smi_start_processing(void *send_info,
ipmi_smi_t intf)
{
/* Try to claim any interrupts. */
if (new_smi->irq_setup)
new_smi->irq_setup(new_smi);
--> IRQ arrives here and irq handler tries to modify uninitialized timer
which triggers BUG_ON(!timer->function) in __mod_timer().
Call Trace:
<IRQ>
[<ffffffffa0532617>] start_new_msg+0x47/0x80 [ipmi_si]
[<ffffffffa053269e>] start_check_enables+0x4e/0x60 [ipmi_si]
[<ffffffffa0532bd8>] smi_event_handler+0x1e8/0x640 [ipmi_si]
[<ffffffff810f5584>] ? __rcu_process_callbacks+0x54/0x350
[<ffffffffa053327c>] si_irq_handler+0x3c/0x60 [ipmi_si]
[<ffffffff810efaf0>] handle_IRQ_event+0x60/0x170
[<ffffffff810f245e>] handle_edge_irq+0xde/0x180
[<ffffffff8100fc59>] handle_irq+0x49/0xa0
[<ffffffff8154643c>] do_IRQ+0x6c/0xf0
[<ffffffff8100ba53>] ret_from_intr+0x0/0x11
/* Set up the timer that drives the interface. */
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
The following patch fixes the problem.
To: Openipmi-developer@lists.sourceforge.net
To: Corey Minyard <minyard@acm.org>
CC: linux-kernel@vger.kernel.org
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # Applies cleanly to 3.10-, needs small rework before
hwrng kthread can be waiting via hwrng_fillfn for some data from a rng
like virtio-rng:
hwrng D ffff880093e17798 0 382 2 0x00000000
...
Call Trace:
[<ffffffff817339c6>] wait_for_completion_killable+0x96/0x210
[<ffffffffa00aa1b7>] virtio_read+0x57/0xf0 [virtio_rng]
[<ffffffff814f4a35>] hwrng_fillfn+0x75/0x130
[<ffffffff810aa243>] kthread+0xf3/0x110
And when some user program tries to read the /dev node in this state,
we get:
rngd D ffff880093e17798 0 762 1 0x00000004
...
Call Trace:
[<ffffffff817351ac>] mutex_lock_nested+0x15c/0x3e0
[<ffffffff814f478e>] rng_dev_read+0x6e/0x240
[<ffffffff81231958>] __vfs_read+0x28/0xe0
[<ffffffff81232393>] vfs_read+0x83/0x130
And this is indeed unkillable. So use mutex_lock_interruptible
instead of mutex_lock in rng_dev_read and exit immediatelly when
interrupted. And possibly return already read data, if any (as POSIX
allows).
v2: use ERESTARTSYS instead of EINTR
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: <linux-crypto@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
commit 07b133e606 ("char/tpm: simplify duration calculation and
eliminate smatch warning.") includes a misleading test that is always
false. The tpm_ordinal_duration table is only valid for TPM_PROTECTED
ordinals where the higher 16 bits are all 0, anyway.
Signed-off-by: Martin Wilck <Martin.Wilck@ts.fujitsu.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
We cannot put the HW RNG to idle using a timer because we cannot disable
clocks from atomic context. Use a delayed work instead.
Fixes a warning with CONFIG_DEBUG_MUTEXES on Nokia N900 during boot.
Reported-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to allow panic actions to be processed, the ipmi watchdog
driver sets a new timeout value on panic. The 255s timeout
was designed to allow kdump and others actions on panic, as in
http://lkml.iu.edu/hypermail/linux/kernel/0711.3/0258.html
This is counter-intuitive for a end-user who sets watchdog timeout
value to something like 30s and who expects BMC to reset the system
within 30s of a panic.
This commit allows user to configure the timeout on panic.
Signed-off-by: Jean-Yves Faye <jean-yves.faye@c-s.fr>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The policy for drivers is to have MODULE_DEVICE_TABLE() just after the
struct used in it. For clarity.
Suggested-by: Corey Minyard <minyard@acm.org>
Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The IPMI driver would let the final timeout just happen, but it could
easily just stop the timer. If the timer stop fails that's ok, that
should be rare.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The timer and thread were not being started for internal messages,
so in interrupt mode if something hung the timer would never go
off and clean things up. Factor out the internal message sending
and start the timer for those messages, too.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Gouji, Masayuki <gouji.masayuki@jp.fujitsu.com>
Cc: stable@vger.kernel.org
Sudip Mukherjee