Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3bzrQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LkMB/4/MkpN4F2WudNCKgmYay2gw3hq8aOR
5Xh/SE6N3BEgBpQiMEUdePRT6LqnQMsSpOaUoKfd4nFvCyLaV7itaYzQuUpo+UJ/
a4UDHJPVfrDJeFghWqSngfEW/N66mpO3UuAvhSRTR3ku0T31v9FkcLsMbdxVUpLC
ablSaFfPCOtTQOsG9blRUL/GAWUhGzPI/Hl4VldS0FvKDmMDY2fxt7QxXRaEYItc
i1Uthklxd0BfRmDqv0WEpduUhbwzg6Uir9pXSisux7DpMk1Li0IyPST5UcRl0Zf4
CKL/qfdQANpufj9kGmrlCOnXB9P5/XYVwfYV430WqMyw0QaOzzSrxT7C
=CZ/+
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: More updates for v5.5
Some more development work for v5.5. Highlights include:
- More cleanups from Morimoto-san.
- Trigger word detection for RT5677.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the support of the new PCM sync_stop ops in ASoC component.
It's optional and can be NULL unless you need the sync operation.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191121190709.29121-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many PCI and other drivers performs snd_pcm_period_elapsed() simply in
its interrupt handler, so the sync_stop operation is just to call
synchronize_irq(). Instead of putting this call multiple times,
introduce the common card->sync_irq field. When this field is set,
PCM core performs synchronize_irq() for sync-stop operation. Each
driver just needs to copy its local IRQ number to card->sync_irq, and
that's all we need.
Link: https://lore.kernel.org/r/20191117085308.23915-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The standard programming model of a PCM sound driver is to process
snd_pcm_period_elapsed() from an interrupt handler. When a running
stream is stopped, PCM core calls the trigger-STOP PCM ops, sets the
stream state to SETUP, and moves on to the next step. This is
performed in an atomic manner -- this could be called from the interrupt
context, after all.
The problem is that, if the stream goes further and reaches to the
CLOSE state immediately, the stream might be still being processed in
snd_pcm_period_elapsed() in the interrupt context, and hits a NULL
dereference. Such a crash happens because of the atomic operation,
and we can't wait until the stream-stop finishes.
For addressing such a problem, this commit adds a new PCM ops,
sync_stop. This gets called at the appropriate places that need a
sync with the stream-stop, i.e. at hw_params, prepare and hw_free.
Some drivers already have a similar mechanism implemented locally, and
we'll refactor the code later.
Link: https://lore.kernel.org/r/20191117085308.23915-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the support for the feature to automatically allocate
and free PCM buffers, so called "managed buffer allocation" mode.
It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and
snd_pcm_set_managed_buffer_all(), both of which correspond to the
existing preallocator helpers, snd_pcm_lib_preallocate_pages() and
snd_pcm_lib_preallocate_pages_for_all(). When the new helper is used,
it not only performs the pre-allocation of buffers, but also it
manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params
ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core,
respectively. This allows drivers to drop the explicit calls of the
memory allocation / release functions, and it will be a good amount of
code reduction in the end of this patch series.
When the PCM substream is set to the managed buffer allocation mode,
the managed_buffer_alloc flag is set in the substream object. Since
some drivers want to know when a buffer is newly allocated or
re-allocated at hw_params callback (e.g. want to set up the additional
stuff for the given buffer only at allocation time), now PCM core
turns on buffer_changed flag when the buffer has changed.
The standard conversions to use the new API will be straightforward:
- Replace snd_pcm_lib_preallocate*() calls with the corresponding
snd_pcm_set_managed_buffer*(); the arguments should be unchanged
- Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls;
the check of snd_pcm_lib_malloc() returns should be replaced with
the check of runtime->buffer_changed flag.
- If hw_params or hw_free becomes empty, drop them from PCM ops
Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This ASCII string can carry additional information about
soundcard components or configuration. Add the possibility
to set this string via the ASoC card.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191119174933.25526-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch uses rtd instead of pcm at snd_soc_pcm_component_new/free()
parameter.
This is prepare for dai_link remove bug fix on topology.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pnhqx89j.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to firmware manifest/signature differences, we have to use
different firmware names, so split CNL machine table in three (CNL,
CFL, CML).
The CFL table is currently empty since all known platforms use
HDaudio, but let's plan ahead.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191111222901.19892-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The helper is no longer referred after the recent code refactoring.
Drop the export for saving some bits and future misuse.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a new timer instance is created and assigned to the active link
in snd_timer_open(), the caller still doesn't (can't) set its callback
and callback data. In both the user-timer and the sequencer-timer
code, they do manually set up the callbacks after calling
snd_timer_open(). This has a potential risk of race when the timer
instance is added to the already running timer target, as the callback
might get triggered during setting up the callback itself.
This patch tries to address it by changing the API usage slightly:
- An empty timer instance is created at first via the new function
snd_timer_instance_new(). This object isn't linked to the timer
list yet.
- The caller sets up the callbacks and others stuff for the new timer
instance.
- The caller invokes snd_timer_open() with this instance, so that it's
linked to the target timer.
For closing, do similarly:
- Call snd_timer_close(). This unlinks the timer instance from the
timer list.
- Free the timer instance via snd_timer_instance_free() after that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191107192008.32331-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EFLYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JCuB/40P/KPRGlEFBSJAwTfCkjQxzvQUGBy
Y3w9QeMq3ONhCJt5BusmeuFqdkanzYqnl+NveGYKdKNTAwh6vEMGiMbGSB8dgrR5
R7PLNBDRJi7ZUDdOZle7VrdUiZWyieaZk/ecWxfTPKfqzoBjnM3XYSa30i55hvbQ
A2MTimFsO7nf0caLNBLqEqBjy68IHQ3tuHH27kA0MIpVNsYVrjaWfM400ot3odbg
0vMpNTM+PDcQGkWcq3sKJBOVVjmGg2Xs1yM5hv6Mu+q1zXLCtCKj+Pv+ZXC3BT6e
Yyxv/arpgvtjIU79Tv9RamVRC4jN6ZJRkThP9UW6JrX7tPCjvD+ygzPn
=4FMp
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.5
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
This patch adds the vmalloc buffer support to ALSA memalloc core. A
new type, SNDRV_DMA_TYPE_VMALLOC was added.
The vmalloc buffer has been already supported in the PCM via a few own
helper functions, but the user sometimes get confused and misuse
them. With this patch, the whole buffer management is integrated into
the memalloc core, so they can be used in a sole common way.
Link: https://lore.kernel.org/r/20191105080138.1260-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_soc_dobj is used only when SND_SOC_TOPOLOGY was selected.
Let's enable it under SND_SOC_TOPOLOGY.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8xq251d.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
Because of topology side specific reason,
it is calling snd_soc_dapm_new_dai_widgets(),
but it is not needed _dais() side.
This patch factorizes snd_soc_register_dai() to
topology / _dais() common part, and topology specific part.
And do topology specific part at soc-topology.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sgn2251p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has 2 functions.
snd_soc_register_dai() is used from topology
snd_soc_register_dais() is used from snd_soc_add_component()
In general, people think like _dai() is called from _dais()
with for loop. But in reality, these are very similar
but different implementation.
We shouldn't have duplicated and confusing implementation.
snd_soc_register_dai() is now used from topology.
But to reduce duplicated code, it should be used from _dais(), too.
To prepare it, this patch adds missing parameter legacy_dai_naming
to snd_soc_register_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv7i251u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and is difficult to debug.
This patch adds missing soc_del_dai() and snd_soc_unregister_dai().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9ry251z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The sensitivity could improve by decreasing the HW debounce time
and reduce the delay time of workequeue.
This patch added a device property for HW debounce time control.
We could change this value to tune the sensitivity of push button.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191030085533.14299-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using snd-hda-codec-hdmi driver for HDMI/DP
instead of ASoC hdac-hdmi. This is aligned with how other
HDA codecs are already handled.
When snd-hda-codec-hdmi is used, the PCM device numbers are
parsed from card topology and passed to the codec driver.
This needs to be done at runtime as topology changes may
affect PCM device allocation.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support the DP-MST multiple streams via single connector feature,
the HDMI driver was extended with the concept of backup PCMs. See
commit 9152085def ("ALSA: hda - add DP MST audio support").
This implementation works fine with snd_hda_intel.c as PCM topology
is fully managed within the single driver.
When the HDA codec driver is used from ASoC components, the concept
of backup PCMs no longer fits. For ASoC topologies, the physical
HDMI converters are presented as backend DAIs and these should match
with hardware capabilities. The ASoC topology may define arbitrary
PCMs (i.e. frontend DAIs) and have processing elements before eventual
routing to the HDMI BE DAIs. With backup PCMs, the link between
FE and BE DAIs would become dynamic and change when monitors are
(un)plugged. This would lead to modifying the topology every time
hotplug events happen, which is not currently possible in ASoC and
there does not seem to be any obvious benefits from this design.
To overcome above problems and enable the HDMI driver to be used
from ASoC, this patch adds a new mode (mst_no_extra_pcms flags) to
patch_hdmi.c. In this mode, the codec driver does not assume
the backup PCMs to be created.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new ipc messages which will be sent from driver to FW, to ask FW to
enter specific power saving state.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191025224122.7718-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
for_each_dpcm_xx() macro is using "dpcm" as parameter (1),
but, it is also struct member (2).
#define for_each_dpcm_fe(be, stream, dpcm) \
list_for_each_entry(dpcm, &(be)->dpcm[stream]...)
^^^^(1) ^^^^(2)
Thus, it will be compile error if user not used "dpcm" as parameter
for_each_dpcm_fe(be, stream, dp)
^^
This patch fixup it.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv7x7idx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA SoC has for_each_rtdcom() which is link list for
rtd-component which is called as rtdcom. The relationship image is like below
rtdcom rtdcom rtdcom
component component component
rtd->component_list -> list -> list -> list ...
Here, the pointer get via normal link list is rtdcom,
Thus, current for_each loop is like below, and need to get
component via rtdcom->component
for_each_rtdcom(rtd, rtdcom) {
component = rtdcom->component;
...
}
but usually, user want to get pointer from for_each_xxx is component
directly, like below.
for_each_rtd_component(rtd, rtdcom, component) {
...
}
This patch expands list_for_each_entry manually, and enable to get
component directly from for_each macro.
Because of it, the macro becoming difficult to read,
but macro itself becoming useful.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878spm64m4.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For distributions, we need one place where we can decide
which driver will be activated for the auto-configation of the
Intel's HDA hardware with DSP. Actually, we cover three drivers:
* Legacy HDA
* Intel SST
* Intel Sound Open Firmware (SOF)
All those drivers registers similar PCI IDs, so the first
driver probed from the PCI stack can win. But... it is not
guaranteed that the correct driver wins.
This commit changes Intel's NHLT ACPI module to a common
DSP probe module for the Intel's hardware. All above sound
drivers calls this code. The user can force another behaviour
using the module parameter 'dsp_driver' located in
the 'snd-intel-dspcfg' module.
This change allows to add specific dmi checks for the specific
systems. The examples are taken from the pull request:
https://github.com/thesofproject/linux/pull/927
Tested on Lenovo Carbon X1 7th gen.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022174313.29087-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl2tmNgTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0Mp7B/9TN2O39/jS2Rjg7jUtHHqpBSv2a4Tq
oyJ6l69C2aeS2HLqJc5PkFRXw2C2pOdMdCjY7XXNC3M02zIC9Eh5b2Y2FlYPhMUz
LMHVZ69IU0vMgW/9AWi140h7h0pDoNzqagsIpzm1+UDkk0ITH7NORUyc4BKCLJiG
MzgWtExa7MiakkriS23LPPNDspx05aRKul+wB20GBKCB1W5LjBDiiH5JUmyx9C23
Gto04TrDbJrRmQeVcJJfuzWQRcQVhocdjqqjI5lrvYPqB8eawBIN+x/DHBkjnmBw
JOZaQqAlOmCV5sJhkX/KW9nE+SqELPVMDE1LgNIQXspxKL3vXX1OqQ7i
=EmvC
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.4-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.4
A collection of fixes that have arrived since the merge window. There
are a small number of core fixes here but they are smaller ones around
error handling.
Content-Transfer-Encoding: 8bit
Without <types.h> we will get these error
linux/include/sound/sof/header.h:125:2: error: unknown type name ‘uint32_t’uint32_t size;
linux/include/sound/sof/header.h:136:2: error: unknown type name ‘uint32_t’uint32_t size;
linux/include/sound/sof/header.h:137:2: error: unknown type name ‘uint32_t’uint32_t cmd;
...
linux/include/sound/sof/dai-imx.h:18:2: error: unknown type name ‘uint16_t’uint16_t reserved1;
linux/include/sound/sof/dai-imx.h:30:2: error: unknown type name ‘uint16_t’uint16_t tdm_slot_width;
linux/include/sound/sof/dai-imx.h:31:2: error: unknown type name ‘uint16_t’uint16_t reserved2;
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a7a24l7r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce sof_ipc_dai_esai_params to keep information that
we get from topology and we send to DSP FW.
Also bump the ABI minor to reflect the changes on DSP FW.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191008164443.1358-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When debug is enabled compiler cannot find the definition of
clk_get_rate resulting in the following error:
./include/sound/simple_card_utils.h:168:40: note: previous implicit
declaration of ‘clk_get_rate’ was here
dev_dbg(dev, "%s clk %luHz\n", name, clk_get_rate(dai->clk));
./include/sound/simple_card_utils.h:168:3: note: in expansion of macro
‘dev_dbg’
dev_dbg(dev, "%s clk %luHz\n", name, clk_get_rate(dai->clk));
Fix this by including the appropriate header.
Fixes: 0580dde594 ("ASoC: simple-card-utils: add asoc_simple_debug_info()")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191009153615.32105-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
asoc_simple_debug_info and asoc_simple_debug_dai must be static
otherwise we might a compilation error if the compiler decides
not to inline the given function.
Fixes: 0580dde594 ("ASoC: simple-card-utils: add asoc_simple_debug_info()")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20191009153615.32105-3-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has pcm_new/pcm_free, but,
it doesn't have "component" at parameter.
Thus, each callback can't know it is called for which component.
Each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name.
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple same driver
name component.
To solve this issue, each callback need to be called with component.
This patch adds new pcm_construct/pcm_destruct with "component"
parameter.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sgobaf3g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_component_driver has snd_pcm_ops, and each driver can
have callback via it (1).
But, it is mainly created for ALSA, thus, it doesn't have "component"
as parameter for ALSA SoC (1)(2).
Thus, each callback can't know it is called for which component.
Thus, each callback currently is getting "component" by using
snd_soc_rtdcom_lookup() with driver name (3).
--- ALSA SoC ---
...
if (component->driver->ops &&
component->driver->ops->open)
(1) return component->driver->ops->open(substream);
...
--- driver ---
(2) static int xxx_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
(3) struct snd_soc_component *component = snd_soc_rtdcom_lookup(..);
...
}
It works today, but, will not work in the future if we support multi
CPU/Codec/Platform, because 1 rtd might have multiple components which
have same driver name.
To solve this issue, each callback needs to be called with component.
We already have many component driver callback.
This patch copies each snd_pcm_ops member under component driver,
and having "component" as parameter.
--- ALSA SoC ---
...
if (component->driver->open)
=> return component->driver->open(component, substream);
...
--- driver ---
=> static int xxx_open(struct snd_soc_component *component,
struct snd_pcm_substream *substream)
{
...
}
*Note*
Only Intel skl-pcm has .get_time_info implementation, but ALSA SoC
framework doesn't call it so far.
To keep its implementation, this patch keeps .get_time_info,
but it is still not called.
Intel guy need to support it in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tv8raf3r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cases where an interface can be pin-muxed, we need to assess at
probe time which configuration should be used. In cases such as
SoundWire, we need to maintain an alternate list of machines and walk
through them when the primary detection based on ACPI _HID fails.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916214251.13130-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When interfaces can be pin-muxed, static information from ACPI might
not be enough. Add information on which links needs to be enabled by
hardware/firmware for a specific machine driver to be selected.
When walking through the list of possible machines, links will be
checked, which implies that configurations where multiple links are
required need to be checked first.
Additional criteria will be needed later, such as which SoundWire
Slave devices are actually enabled, but for now this helps detect
between basic configurations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190916214251.13130-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix potential DMA hang upon starting playback on devices in HDA mode
on Intel platforms (Gemini Lake/Whiskey Lake/Comet Lake/Ice Lake). It
doesn't affect platforms before Gemini Lake or any Intel device in
non-HDA mode.
The reset value for the LOSDIV register is all output streams valid.
Clear this register to invalidate non-existent streams when the bus
is powered up.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190930142945.7805-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The host period bytes value needs to be passed to firmware.
However current implementation uses this field for different
purpose - to indicate whether FW should send stream position
to the host. Therefore this patch introduces another field
"no_stream_position", a boolean value aimed to store information
about position tracking. This way host_period_bytes preserves its
original value.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When set the runtime hardware parameters, we may need to query
the capability of DMA to complete the parameters.
This patch is to Extract this operation from
dmaengine_pcm_set_runtime_hwparams function to a separate function
snd_dmaengine_pcm_refine_runtime_hwparams, that other components
which need this feature can call this function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/d728f65194e9978cbec4132b522d4fed420d704a.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" is handled by soc_xxx_pcm_runtime(), and
"rtd->dev" is handled by soc_rtd_xxx().
There is no reason to separate these, and it makes code complex.
We can free these in the same time.
Here soc_rtd_free() (A) which frees rtd->dev is called from
soc_remove_link_dais() many times (1).
Then, it is using dev_registered flags to avoid multi kfree() (2).
This is no longer needed if we can merge these functions.
static void soc_remove_link_dais(...)
{
...
(1) for_each_comp_order(order) {
(1) for_each_card_rtds(card, rtd) {
(A) soc_rtd_free(rtd);
...
}
}
}
(A) static void soc_rtd_free(...)
{
(2) if (rtd->dev_registered) {
/* we don't need to call kfree() for rtd->dev */
device_unregister(rtd->dev);
(2) rtd->dev_registered = 0;
}
}
This patch merges soc_rtd_free() into soc_free_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878squf7oi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc-component.h already has SPDX License, thus, GPL explanation
is not needed. This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736grafp5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai