Since commit 59dc76b0d4 ("mm: vmscan: reduce size of inactive file
list") we noticed bigger IO spikes during changes in cache access
patterns.
The patch in question shrunk the inactive list size to leave more room
for the current workingset in the presence of streaming IO. However,
workingset transitions that previously happened on the inactive list are
now pushed out of memory and incur more refaults to complete.
This patch disables active list protection when refaults are being
observed. This accelerates workingset transitions, and allows more of
the new set to establish itself from memory, without eating into the
ability to protect the established workingset during stable periods.
The workloads that were measurably affected for us were hit pretty bad
by it, with refault/majfault rates doubling and tripling during cache
transitions, and the machines sustaining half-hour periods of 100% IO
utilization, where they'd previously have sub-minute peaks at 60-90%.
Stateful services that handle user data tend to be more conservative
with kernel upgrades. As a result we hit most page cache issues with
some delay, as was the case here.
The severity seemed to warrant a stable tag.
Fixes: 59dc76b0d4 ("mm: vmscan: reduce size of inactive file list")
Link: http://lkml.kernel.org/r/20170404220052.27593-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 091d0d55b2 ("shm: fix null pointer deref when userspace
specifies invalid hugepage size") had replaced MAP_HUGE_MASK with
SHM_HUGE_MASK. Though both of them contain the same numeric value of
0x3f, MAP_HUGE_MASK flag sounds more appropriate than the other one in
the context. Hence change it back.
Link: http://lkml.kernel.org/r/20170404045635.616-1-khandual@linux.vnet.ibm.com
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo has reported that sysrq triggered OOM killer will print a
misleading information when no tasks are selected:
sysrq: SysRq : Manual OOM execution
Out of memory: Kill process 4468 ((agetty)) score 0 or sacrifice child
Killed process 4468 ((agetty)) total-vm:43704kB, anon-rss:1760kB, file-rss:0kB, shmem-rss:0kB
sysrq: SysRq : Manual OOM execution
Out of memory: Kill process 4469 (systemd-cgroups) score 0 or sacrifice child
Killed process 4469 (systemd-cgroups) total-vm:10704kB, anon-rss:120kB, file-rss:0kB, shmem-rss:0kB
sysrq: SysRq : Manual OOM execution
sysrq: OOM request ignored because killer is disabled
sysrq: SysRq : Manual OOM execution
sysrq: OOM request ignored because killer is disabled
sysrq: SysRq : Manual OOM execution
sysrq: OOM request ignored because killer is disabled
The real reason is that there are no eligible tasks for the OOM killer
to select but since commit 7c5f64f844 ("mm: oom: deduplicate victim
selection code for memcg and global oom") the semantic of out_of_memory
has changed without updating moom_callback.
This patch updates moom_callback to tell that no task was eligible which
is the case for both oom killer disabled and no eligible tasks. In
order to help distinguish first case from the second add printk to both
oom_killer_{enable,disable}. This information is useful on its own
because it might help debugging potential memory allocation failures.
Fixes: 7c5f64f844 ("mm: oom: deduplicate victim selection code for memcg and global oom")
Link: http://lkml.kernel.org/r/20170404134705.6361-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a warning diagnostics to user if we failed to allocate swap slots
cache and use it.
[akpm@linux-foundation.org: use WARN_ONCE return value, fix grammar in message]
Link: http://lkml.kernel.org/r/20170328234827.GA10107@linux.intel.com
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On SPARSEMEM systems page poisoning is enabled after buddy is up,
because of the dependency on page extension init. This causes the pages
released by free_all_bootmem not to be poisoned. This either delays or
misses the identification of some issues because the pages have to
undergo another cycle of alloc-free-alloc for any corruption to be
detected.
Enable page poisoning early by getting rid of the PAGE_EXT_DEBUG_POISON
flag. Since all the free pages will now be poisoned, the flag need not
be verified before checking the poison during an alloc.
[vinmenon@codeaurora.org: fix Kconfig]
Link: http://lkml.kernel.org/r/1490878002-14423-1-git-send-email-vinmenon@codeaurora.org
Link: http://lkml.kernel.org/r/1490358246-11001-1-git-send-email-vinmenon@codeaurora.org
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cluster lock is used to protect the swap_cluster_info and corresponding
elements in swap_info_struct->swap_map[]. But it is found that now in
scan_swap_map_slots(), swap_avail_lock may be acquired when cluster lock
is held. This does no good except making the locking more complex and
improving the potential locking contention, because the
swap_info_struct->lock is used to protect the data structure operated in
the code already. Fix this via moving the corresponding operations in
scan_swap_map_slots() out of cluster lock.
Link: http://lkml.kernel.org/r/20170317064635.12792-3-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is just a cleanup patch, no functionality change.
In cluster_list_add_tail(), spin_lock_nested() is used to lock the
cluster, while unlock_cluster() is used to unlock the cluster. To
improve the code readability, use spin_unlock() directly to unlock the
cluster.
Link: http://lkml.kernel.org/r/20170317064635.12792-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit cbab0e4eec ("swap: avoid read_swap_cache_async() race to
deadlock while waiting on discard I/O completion") fixed a deadlock in
read_swap_cache_async(). Because at that time, in swap allocation path,
a swap entry may be set as SWAP_HAS_CACHE, then wait for discarding to
complete before the page for the swap entry is added to the swap cache.
But in commit 815c2c543d ("swap: make swap discard async"), the
discarding for swap become asynchronous, waiting for discarding to
complete will be done before the swap entry is set as SWAP_HAS_CACHE.
So the comments in code is incorrect now. This patch fixes the
comments.
The cond_resched() added in the commit cbab0e4eec is not necessary now
too. But if we added some sleep in swap allocation path in the future,
there may be some hard to debug/reproduce deadlock bug. So it is kept.
Link: http://lkml.kernel.org/r/20170317064635.12792-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no user for it. Remove it.
[minchan@kernel.org: use false instead of SWAP_FAIL]
Link: http://lkml.kernel.org/r/20170316053313.GA19241@bbox
Link: http://lkml.kernel.org/r/1489555493-14659-11-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rmap_one's return value controls whether rmap_work should contine to
scan other ptes or not so it's target for changing to boolean. Return
true if the scan should be continued. Otherwise, return false to stop
the scanning.
This patch makes rmap_one's return value to boolean.
Link: http://lkml.kernel.org/r/1489555493-14659-10-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no user of the return value from rmap_walk() and friends so
this patch makes them void-returning functions.
Link: http://lkml.kernel.org/r/1489555493-14659-9-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In 2002, [1] introduced SWAP_AGAIN. At that time, try_to_unmap_one used
spin_trylock(&mm->page_table_lock) so it's really easy to contend and
fail to hold a lock so SWAP_AGAIN to keep LRU status makes sense.
However, now we changed it to mutex-based lock and be able to block
without skip pte so there is few of small window to return SWAP_AGAIN so
remove SWAP_AGAIN and just return SWAP_FAIL.
[1] c48c43e, minimal rmap
Link: http://lkml.kernel.org/r/1489555493-14659-7-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ttu doesn't need to return SWAP_MLOCK. Instead, just return SWAP_FAIL
because it means the page is not-swappable so it should move to another
LRU list(active or unevictable). putback friends will move it to right
list depending on the page's LRU flag.
Link: http://lkml.kernel.org/r/1489555493-14659-6-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
try_to_munlock returns SWAP_MLOCK if the one of VMAs mapped the page has
VM_LOCKED flag. In that time, VM set PG_mlocked to the page if the page
is not pte-mapped THP which cannot be mlocked, either.
With that, __munlock_isolated_page can use PageMlocked to check whether
try_to_munlock is successful or not without relying on try_to_munlock's
retval. It helps to make try_to_unmap/try_to_unmap_one simple with
upcoming patches.
[minchan@kernel.org: remove PG_Mlocked VM_BUG_ON check]
Link: http://lkml.kernel.org/r/20170411025615.GA6545@bbox
Link: http://lkml.kernel.org/r/1489555493-14659-5-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the page is mapped and rescue in try_to_unmap_one, the
page_mapcount() of a page cannot be zero, so the page_mapcount check in
try_to_unmap is enough to return SWAP_SUCCESS. IOW, SWAP_MLOCK check is
redundant so remove it.
Link: http://lkml.kernel.org/r/1489555493-14659-4-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we found lazyfree page is dirty, try_to_unmap_one can just
SetPageSwapBakced in there like PG_mlocked page and just return with
SWAP_FAIL which is very natural because the page is not swappable right
now so that vmscan can activate it. There is no point to introduce new
return value SWAP_DIRTY in try_to_unmap at the moment.
Link: http://lkml.kernel.org/r/1489555493-14659-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By reviewing code, I find that when enter do_try_to_free_pages, the
may_thrash is always clear, and it will retry shrink zones to tap
cgroup's reserves memory by setting may_thrash when the former
shrink_zones reclaim nothing.
However, when memcg is disabled or on legacy hierarchy, or there do not
have any memcg protected by low limit, it should not do this useless
retry at all, for we do not have any cgroup's reserves memory to tap,
and we have already done hard work but made no progress, which as Michal
pointed out in former version, we are trying hard to control the retry
logical of page alloctor, and the current additional round of reclaim is
just lame.
Therefore, to avoid this unneeded retrying and make code more readable,
we remove the may_thrash field in scan_control, instead, introduce
memcg_low_reclaim and memcg_low_skipped, and only retry when
memcg_low_skipped, by setting memcg_low_reclaim.
[xieyisheng1@huawei.com: remove may_thrash field, introduce mem_cgroup_reclaim]
Link: http://lkml.kernel.org/r/1490191893-5923-1-git-send-email-ysxie@foxmail.com
Link: http://lkml.kernel.org/r/1490191893-5923-1-git-send-email-ysxie@foxmail.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Suggested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By reviewing code, I find that if the migrate target is a large free
page and we ignore suitable, it may splite large target free page into
smaller block which is not good for defrag. So move the ignore block
suitable after check large free page.
As Vlastimil pointed out in RFC version that this patch is just based on
logical analyses which might be better for future-proofing the function
and it is most likely won't have any visible effect right now, for
direct compaction shouldn't have to be called if there's a
>=pageblock_order page already available.
Link: http://lkml.kernel.org/r/1489490743-5364-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current implementation calculates usemap_size in two steps:
* calculate number of bytes to cover these bits
* calculate number of "unsigned long" to cover these bytes
It would be more clear by:
* calculate number of "unsigned long" to cover these bits
* multiple it with sizeof(unsigned long)
This patch refine usemap_size() a little to make it more easy to
understand.
Link: http://lkml.kernel.org/r/20170310043713.96871-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__GFP_NOWARN, which is usually added to avoid warnings from callsites
that expect to fail and have fallbacks, currently also suppresses
allocation stall warnings. These trigger when an allocation is stuck
inside the allocator for 10 seconds or longer.
But there is no class of allocations that can get legitimately stuck in
the allocator for this long. This always indicates a problem.
Always emit stall warnings. Restrict __GFP_NOWARN to alloc failures.
Link: http://lkml.kernel.org/r/20170125181150.GA16398@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd is woken to reclaim a node based on a failed allocation request
from any eligible zone. Once reclaiming in balance_pgdat(), it will
continue reclaiming until there is an eligible zone available for the
zone it was woken for. kswapd tracks what zone it was recently woken
for in pgdat->kswapd_classzone_idx. If it has not been woken recently,
this zone will be 0.
However, the decision on whether to sleep is made on
kswapd_classzone_idx which is 0 without a recent wakeup request and that
classzone does not account for lowmem reserves. This allows kswapd to
sleep when a low small zone such as ZONE_DMA is balanced for a GFP_DMA
request even if a stream of allocations cannot use that zone. While
kswapd may be woken again shortly in the near future there are two
consequences -- the pgdat bits that control congestion are cleared
prematurely and direct reclaim is more likely as kswapd slept
prematurely.
This patch flips kswapd_classzone_idx to default to MAX_NR_ZONES (an
invalid index) when there has been no recent wakeups. If there are no
wakeups, it'll decide whether to sleep based on the highest possible
zone available (MAX_NR_ZONES - 1). It then becomes critical that the
"pgdat balanced" decisions during reclaim and when deciding to sleep are
the same. If there is a mismatch, kswapd can stay awake continually
trying to balance tiny zones.
simoop was used to evaluate it again. Two of the preparation patches
regressed the workload so they are included as the second set of
results. Otherwise this patch looks artifically excellent
4.11.0-rc1 4.11.0-rc1 4.11.0-rc1
vanilla clear-v2 keepawake-v2
Amean p50-Read 21670074.18 ( 0.00%) 19786774.76 ( 8.69%) 22668332.52 ( -4.61%)
Amean p95-Read 25456267.64 ( 0.00%) 24101956.27 ( 5.32%) 26738688.00 ( -5.04%)
Amean p99-Read 29369064.73 ( 0.00%) 27691872.71 ( 5.71%) 30991404.52 ( -5.52%)
Amean p50-Write 1390.30 ( 0.00%) 1011.91 ( 27.22%) 924.91 ( 33.47%)
Amean p95-Write 412901.57 ( 0.00%) 34874.98 ( 91.55%) 1362.62 ( 99.67%)
Amean p99-Write 6668722.09 ( 0.00%) 575449.60 ( 91.37%) 16854.04 ( 99.75%)
Amean p50-Allocation 78714.31 ( 0.00%) 84246.26 ( -7.03%) 74729.74 ( 5.06%)
Amean p95-Allocation 175533.51 ( 0.00%) 400058.43 (-127.91%) 101609.74 ( 42.11%)
Amean p99-Allocation 247003.02 ( 0.00%) 10905600.00 (-4315.17%) 125765.57 ( 49.08%)
With this patch on top, write and allocation latencies are massively
improved. The read latencies are slightly impaired but it's worth
noting that this is mostly due to the IO scheduler and not directly
related to reclaim. The vmstats are a bit of a mix but the relevant
ones are as follows;
4.10.0-rc7 4.10.0-rc7 4.10.0-rc7
mmots-20170209 clear-v1r25keepawake-v1r25
Swap Ins 0 0 0
Swap Outs 0 608 0
Direct pages scanned 6910672 3132699 6357298
Kswapd pages scanned 57036946 82488665 56986286
Kswapd pages reclaimed 55993488 63474329 55939113
Direct pages reclaimed 6905990 2964843 6352115
Kswapd efficiency 98% 76% 98%
Kswapd velocity 12494.375 17597.507 12488.065
Direct efficiency 99% 94% 99%
Direct velocity 1513.835 668.306 1393.148
Page writes by reclaim 0.000 4410243.000 0.000
Page writes file 0 4409635 0
Page writes anon 0 608 0
Page reclaim immediate 1036792 14175203 1042571
4.11.0-rc1 4.11.0-rc1 4.11.0-rc1
vanilla clear-v2 keepawake-v2
Swap Ins 0 12 0
Swap Outs 0 838 0
Direct pages scanned 6579706 3237270 6256811
Kswapd pages scanned 61853702 79961486 54837791
Kswapd pages reclaimed 60768764 60755788 53849586
Direct pages reclaimed 6579055 2987453 6256151
Kswapd efficiency 98% 75% 98%
Page writes by reclaim 0.000 4389496.000 0.000
Page writes file 0 4388658 0
Page writes anon 0 838 0
Page reclaim immediate 1073573 14473009 982507
Swap-outs are equivalent to baseline.
Direct reclaim is reduced but not eliminated. It's worth noting that
there are two periods of direct reclaim for this workload. The first is
when it switches from preparing the files for the actual test itself.
It's a lot of file IO followed by a lot of allocs that reclaims heavily
for a brief window. While direct reclaim is lower with clear-v2, it is
due to kswapd scanning aggressively and trying to reclaim the world
which is not the right thing to do. With the patches applied, there is
still direct reclaim but the phase change from "creating work files" to
starting multiple threads that allocate a lot of anonymous memory faster
than kswapd can reclaim.
Scanning/reclaim efficiency is restored by this patch.
Page writes from reclaim context are back at 0 which is ideal.
Pages immediately reclaimed after IO completes is slightly improved but
it is expected this will vary slightly.
On UMA, there is almost no change so this is not expected to be a
universal win.
[mgorman@suse.de: fix ->kswapd_classzone_idx initialization]
Link: http://lkml.kernel.org/r/20170406174538.5msrznj6nt6qpbx5@suse.de
Link: http://lkml.kernel.org/r/20170309075657.25121-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A pgdat tracks if recent reclaim encountered too many dirty, writeback
or congested pages. The flags control whether kswapd writes pages back
from reclaim context, tags pages for immediate reclaim when IO
completes, whether processes block on wait_iff_congested and whether
kswapd blocks when too many pages marked for immediate reclaim are
encountered.
The state is cleared in a check function with side-effects. With the
patch "mm, vmscan: fix zone balance check in prepare_kswapd_sleep", the
timing of when the bits get cleared changed. Due to the way the check
works, it'll clear the bits if ZONE_DMA is balanced for a GFP_DMA
allocation because it does not account for lowmem reserves properly.
For the simoop workload, kswapd is not stalling when it should due to
the premature clearing, writing pages from reclaim context like crazy
and generally being unhelpful.
This patch resets the pgdat bits related to page reclaim only when
kswapd is going to sleep. The comparison with simoop is then
4.11.0-rc1 4.11.0-rc1 4.11.0-rc1
vanilla fixcheck-v2 clear-v2
Amean p50-Read 21670074.18 ( 0.00%) 20464344.18 ( 5.56%) 19786774.76 ( 8.69%)
Amean p95-Read 25456267.64 ( 0.00%) 25721423.64 ( -1.04%) 24101956.27 ( 5.32%)
Amean p99-Read 29369064.73 ( 0.00%) 30174230.76 ( -2.74%) 27691872.71 ( 5.71%)
Amean p50-Write 1390.30 ( 0.00%) 1395.28 ( -0.36%) 1011.91 ( 27.22%)
Amean p95-Write 412901.57 ( 0.00%) 37737.74 ( 90.86%) 34874.98 ( 91.55%)
Amean p99-Write 6668722.09 ( 0.00%) 666489.04 ( 90.01%) 575449.60 ( 91.37%)
Amean p50-Allocation 78714.31 ( 0.00%) 86286.22 ( -9.62%) 84246.26 ( -7.03%)
Amean p95-Allocation 175533.51 ( 0.00%) 351812.27 (-100.42%) 400058.43 (-127.91%)
Amean p99-Allocation 247003.02 ( 0.00%) 6291171.56 (-2447.00%) 10905600.00 (-4315.17%)
Read latency is improved, write latency is mostly improved but
allocation latency is regressed. kswapd is still reclaiming
inefficiently, pages are being written back from writeback context and a
host of other issues. However, given the change, it needed to be
spelled out why the side-effect was moved.
Link: http://lkml.kernel.org/r/20170309075657.25121-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Reduce amount of time kswapd sleeps prematurely", v2.
The series is unusual in that the first patch fixes one problem and
introduces other issues that are noted in the changelog. Patch 2 makes
a minor modification that is worth considering on its own but leaves the
kernel in a state where it behaves badly. It's not until patch 3 that
there is an improvement against baseline.
This was mostly motivated by examining Chris Mason's "simoop" benchmark
which puts the VM under similar pressure to HADOOP. It has been
reported that the benchmark has regressed severely during the last
number of releases. While I cannot reproduce all the same problems
Chris experienced due to hardware limitations, there was a number of
problems on a 2-socket machine with a single disk.
simoop latencies
4.11.0-rc1 4.11.0-rc1
vanilla keepawake-v2
Amean p50-Read 21670074.18 ( 0.00%) 22668332.52 ( -4.61%)
Amean p95-Read 25456267.64 ( 0.00%) 26738688.00 ( -5.04%)
Amean p99-Read 29369064.73 ( 0.00%) 30991404.52 ( -5.52%)
Amean p50-Write 1390.30 ( 0.00%) 924.91 ( 33.47%)
Amean p95-Write 412901.57 ( 0.00%) 1362.62 ( 99.67%)
Amean p99-Write 6668722.09 ( 0.00%) 16854.04 ( 99.75%)
Amean p50-Allocation 78714.31 ( 0.00%) 74729.74 ( 5.06%)
Amean p95-Allocation 175533.51 ( 0.00%) 101609.74 ( 42.11%)
Amean p99-Allocation 247003.02 ( 0.00%) 125765.57 ( 49.08%)
These are latencies. Read/write are threads reading fixed-size random
blocks from a simulated database. The allocation latency is mmaping and
faulting regions of memory. The p50, 95 and p99 reports the worst
latencies for 50% of the samples, 95% and 99% respectively.
For example, the report indicates that while the test was running 99% of
writes completed 99.75% faster. It's worth noting that on a UMA machine
that no difference in performance with simoop was observed so milage
will vary.
It's noted that there is a slight impact to read latencies but it's
mostly due to IO scheduler decisions and offset by the large reduction
in other latencies.
This patch (of 3):
The check in prepare_kswapd_sleep needs to match the one in
balance_pgdat since the latter will return as soon as any one of the
zones in the classzone is above the watermark. This is specially
important for higher order allocations since balance_pgdat will
typically reset the order to zero relying on compaction to create the
higher order pages. Without this patch, prepare_kswapd_sleep fails to
wake up kcompactd since the zone balance check fails.
It was first reported against 4.9.7 that kswapd is failing to wake up
kcompactd due to a mismatch in the zone balance check between
balance_pgdat() and prepare_kswapd_sleep().
balance_pgdat() returns as soon as a single zone satisfies the
allocation but prepare_kswapd_sleep() requires all zones to do +the
same. This causes prepare_kswapd_sleep() to never succeed except in the
order == 0 case and consequently, wakeup_kcompactd() is never called.
For the machine that originally motivated this patch, the state of
compaction from /proc/vmstat looked this way after a day and a half +of
uptime:
compact_migrate_scanned 240496
compact_free_scanned 76238632
compact_isolated 123472
compact_stall 1791
compact_fail 29
compact_success 1762
compact_daemon_wake 0
After applying the patch and about 10 hours of uptime the state looks
like this:
compact_migrate_scanned 59927299
compact_free_scanned 2021075136
compact_isolated 640926
compact_stall 4
compact_fail 2
compact_success 2
compact_daemon_wake 5160
Further notes from Mel that motivated him to pick this patch up and
resend it;
It was observed for the simoop workload (pressures the VM similar to
HADOOP) that kswapd was failing to keep ahead of direct reclaim. The
investigation noted that there was a need to rationalise kswapd
decisions to reclaim with kswapd decisions to sleep. With this patch on
a 2-socket box, there was a 49% reduction in direct reclaim scanning.
However, the impact otherwise is extremely negative. Kswapd reclaim
efficiency dropped from 98% to 76%. simoop has three latency-related
metrics for read, write and allocation (an anonymous mmap and fault).
4.11.0-rc1 4.11.0-rc1
vanilla fixcheck-v2
Amean p50-Read 21670074.18 ( 0.00%) 20464344.18 ( 5.56%)
Amean p95-Read 25456267.64 ( 0.00%) 25721423.64 ( -1.04%)
Amean p99-Read 29369064.73 ( 0.00%) 30174230.76 ( -2.74%)
Amean p50-Write 1390.30 ( 0.00%) 1395.28 ( -0.36%)
Amean p95-Write 412901.57 ( 0.00%) 37737.74 ( 90.86%)
Amean p99-Write 6668722.09 ( 0.00%) 666489.04 ( 90.01%)
Amean p50-Allocation 78714.31 ( 0.00%) 86286.22 ( -9.62%)
Amean p95-Allocation 175533.51 ( 0.00%) 351812.27 (-100.42%)
Amean p99-Allocation 247003.02 ( 0.00%) 6291171.56 (-2447.00%)
Of greater concern is that the patch causes swapping and page writes
from kswapd context rose from 0 pages to 4189753 pages during the hour
the workload ran for. By and large, the patch has very bad behaviour
but easily missed as the impact on a UMA machine is negligible.
This patch is included with the data in case a bisection leads to this
area. This patch is also a pre-requisite for the rest of the series.
Link: http://lkml.kernel.org/r/20170309075657.25121-2-mgorman@techsingularity.net
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the discussion[1], I found it seems there are every PageFlags
functions return bool at this moment so we don't need double negation
any more. Although it's not a problem to keep it, it makes future users
confused to use double negation for them, too.
Remove such possibility.
[1] https://marc.info/?l=linux-kernel&m=148881578820434
Frankly sepaking, I like every PageFlags to return bool instead of int.
It will make it clear. AFAIR, Chen Gang had tried it but don't know why
it was not merged at that time.
http://lkml.kernel.org/r/1469336184-1904-1-git-send-email-chengang@emindsoft.com.cn
Link: http://lkml.kernel.org/r/1488868597-32222-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 3ad38ceb27 ("x86/mm: Remove CONFIG_DEBUG_NX_TEST"),
nothing is using the exported rodata_test_data variable, so drop the
export.
This additionally updates the pr_fmt to avoid redundant strings and
adjusts some whitespace.
Link: http://lkml.kernel.org/r/20170307005313.GA85809@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The round_up() macro generates a couple of unnecessary instructions
in this usage:
48cd: 49 8b 47 50 mov 0x50(%r15),%rax
48d1: 48 83 e8 01 sub $0x1,%rax
48d5: 48 0d ff 0f 00 00 or $0xfff,%rax
48db: 48 83 c0 01 add $0x1,%rax
48df: 48 c1 f8 0c sar $0xc,%rax
48e3: 48 39 c3 cmp %rax,%rbx
48e6: 72 2e jb 4916 <filemap_fault+0x96>
If we change round_up() to ((x) + __round_mask(x, y)) & ~__round_mask(x, y)
then GCC can see through it and remove the mask (because that would be
dead code given the subsequent shift):
48cd: 49 8b 47 50 mov 0x50(%r15),%rax
48d1: 48 05 ff 0f 00 00 add $0xfff,%rax
48d7: 48 c1 e8 0c shr $0xc,%rax
48db: 48 39 c3 cmp %rax,%rbx
48de: 72 2e jb 490e <filemap_fault+0x8e>
But that's problematic because we'd evaluate 'y' twice. Converting
round_up into an inline function prevents it from being used in other
definitions. The easiest thing to do is just change these three usages
of round_up to use DIV_ROUND_UP. Also add an unlikely() because GCC's
heuristic is wrong in this case.
Link: http://lkml.kernel.org/r/20170207192812.5281-1-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GFP_NOFS context is used for the following 5 reasons currently:
- to prevent from deadlocks when the lock held by the allocation
context would be needed during the memory reclaim
- to prevent from stack overflows during the reclaim because the
allocation is performed from a deep context already
- to prevent lockups when the allocation context depends on other
reclaimers to make a forward progress indirectly
- just in case because this would be safe from the fs POV
- silence lockdep false positives
Unfortunately overuse of this allocation context brings some problems to
the MM. Memory reclaim is much weaker (especially during heavy FS
metadata workloads), OOM killer cannot be invoked because the MM layer
doesn't have enough information about how much memory is freeable by the
FS layer.
In many cases it is far from clear why the weaker context is even used
and so it might be used unnecessarily. We would like to get rid of
those as much as possible. One way to do that is to use the flag in
scopes rather than isolated cases. Such a scope is declared when really
necessary, tracked per task and all the allocation requests from within
the context will simply inherit the GFP_NOFS semantic.
Not only this is easier to understand and maintain because there are
much less problematic contexts than specific allocation requests, this
also helps code paths where FS layer interacts with other layers (e.g.
crypto, security modules, MM etc...) and there is no easy way to convey
the allocation context between the layers.
Introduce memalloc_nofs_{save,restore} API to control the scope of
GFP_NOFS allocation context. This is basically copying
memalloc_noio_{save,restore} API we have for other restricted allocation
context GFP_NOIO. The PF_MEMALLOC_NOFS flag already exists and it is
just an alias for PF_FSTRANS which has been xfs specific until recently.
There are no more PF_FSTRANS users anymore so let's just drop it.
PF_MEMALLOC_NOFS is now checked in the MM layer and drops __GFP_FS
implicitly same as PF_MEMALLOC_NOIO drops __GFP_IO. memalloc_noio_flags
is renamed to current_gfp_context because it now cares about both
PF_MEMALLOC_NOFS and PF_MEMALLOC_NOIO contexts. Xfs code paths preserve
their semantic. kmem_flags_convert() doesn't need to evaluate the flag
anymore.
This patch shouldn't introduce any functional changes.
Let's hope that filesystems will drop direct GFP_NOFS (resp. ~__GFP_FS)
usage as much as possible and only use a properly documented
memalloc_nofs_{save,restore} checkpoints where they are appropriate.
[akpm@linux-foundation.org: fix comment typo, reflow comment]
Link: http://lkml.kernel.org/r/20170306131408.9828-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After "mm, vmstat: print non-populated zones in zoneinfo",
/proc/zoneinfo will show unpopulated zones.
The per-cpu pageset statistics are not relevant for unpopulated zones
and can be potentially lengthy, so supress them when they are not
interesting.
Also moves lowmem reserve protection information above pcp stats since
it is relevant for all zones per vm.lowmem_reserve_ratio.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1703061400500.46428@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initscripts can use the information (protection levels) from
/proc/zoneinfo to configure vm.lowmem_reserve_ratio at boot.
vm.lowmem_reserve_ratio is an array of ratios for each configured zone
on the system. If a zone is not populated on an arch, /proc/zoneinfo
suppresses its output.
This results in there not being a 1:1 mapping between the set of zones
emitted by /proc/zoneinfo and the zones configured by
vm.lowmem_reserve_ratio.
This patch shows statistics for non-populated zones in /proc/zoneinfo.
The zones exist and hold a spot in the vm.lowmem_reserve_ratio array.
Without this patch, it is not possible to determine which index in the
array controls which zone if one or more zones on the system are not
populated.
Remaining users of walk_zones_in_node() are unchanged. Files such as
/proc/pagetypeinfo require certain zone data to be initialized properly
for display, which is not done for unpopulated zones.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1703031451310.98023@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce two helpers, is_migrate_highatomic() and is_migrate_highatomic_page().
Simplify the code, no functional changes.
[akpm@linux-foundation.org: use static inlines rather than macros, per mhocko]
Link: http://lkml.kernel.org/r/58B94F15.6060606@huawei.com
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before using cluster lock in free_swap_and_cache(), the
swap_info_struct->lock will be held during freeing the swap entry and
acquiring page lock, so the page swap count will not change when testing
page information later. But after using cluster lock, the cluster lock
(or swap_info_struct->lock) will be held only during freeing the swap
entry. So before acquiring the page lock, the page swap count may be
changed in another thread. If the page swap count is not 0, we should
not delete the page from the swap cache. This is fixed via checking
page swap count again after acquiring the page lock.
I found the race when I review the code, so I didn't trigger the race
via a test program. If the race occurs for an anonymous page shared by
multiple processes via fork, multiple pages will be allocated and
swapped in from the swap device for the previously shared one page.
That is, the user-visible runtime effect is more memory will be used and
the access latency for the page will be higher, that is, the performance
regression.
Link: http://lkml.kernel.org/r/20170301143905.12846-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cgroups currently don't report how much shmem they use, which can be
useful data to have, in particular since shmem is included in the
cache/file item while being reclaimed like anonymous memory.
Add a counter to track shmem pages during charging and uncharging.
Link: http://lkml.kernel.org/r/20170221164343.32252-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chris Down <cdown@fb.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now MADV_FREE pages can be easily reclaimed even for swapless system.
We can safely enable MADV_FREE for all systems.
Link: http://lkml.kernel.org/r/155648585589300bfae1d45078e7aebb3d988b87.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a page is swapbacked, it means it should be in swapcache in
try_to_unmap_one's path.
If a page is !swapbacked, it mean it shouldn't be in swapcache in
try_to_unmap_one's path.
Check both two cases all at once and if it fails, warn and return
SWAP_FAIL. Such bug never mean we should shut down the kernel.
[minchan@kernel.org: do not use VM_WARN_ON_ONCE as if condition[
Link: http://lkml.kernel.org/r/20170309060226.GB854@bbox
Link: http://lkml.kernel.org/r/20170307055551.GC29458@bbox
Signed-off-by: Minchan Kim <minchan@kernel.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When memory pressure is high, we free MADV_FREE pages. If the pages are
not dirty in pte, the pages could be freed immediately. Otherwise we
can't reclaim them. We put the pages back to anonumous LRU list (by
setting SwapBacked flag) and the pages will be reclaimed in normal
swapout way.
We use normal page reclaim policy. Since MADV_FREE pages are put into
inactive file list, such pages and inactive file pages are reclaimed
according to their age. This is expected, because we don't want to
reclaim too many MADV_FREE pages before used once pages.
Based on Minchan's original patch
[minchan@kernel.org: clean up lazyfree page handling]
Link: http://lkml.kernel.org/r/20170303025237.GB3503@bbox
Link: http://lkml.kernel.org/r/14b8eb1d3f6bf6cc492833f183ac8c304e560484.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
madv()'s MADV_FREE indicate pages are 'lazyfree'. They are still
anonymous pages, but they can be freed without pageout. To distinguish
these from normal anonymous pages, we clear their SwapBacked flag.
MADV_FREE pages could be freed without pageout, so they pretty much like
used once file pages. For such pages, we'd like to reclaim them once
there is memory pressure. Also it might be unfair reclaiming MADV_FREE
pages always before used once file pages and we definitively want to
reclaim the pages before other anonymous and file pages.
To speed up MADV_FREE pages reclaim, we put the pages into
LRU_INACTIVE_FILE list. The rationale is LRU_INACTIVE_FILE list is tiny
nowadays and should be full of used once file pages. Reclaiming
MADV_FREE pages will not have much interfere of anonymous and active
file pages. And the inactive file pages and MADV_FREE pages will be
reclaimed according to their age, so we don't reclaim too many MADV_FREE
pages too. Putting the MADV_FREE pages into LRU_INACTIVE_FILE_LIST also
means we can reclaim the pages without swap support. This idea is
suggested by Johannes.
This patch doesn't move MADV_FREE pages to LRU_INACTIVE_FILE list yet to
avoid bisect failure, next patch will do it.
The patch is based on Minchan's original patch.
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/2f87063c1e9354677b7618c647abde77b07561e5.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are a few places the code assumes anonymous pages should have
SwapBacked flag set. MADV_FREE pages are anonymous pages but we are
going to add them to LRU_INACTIVE_FILE list and clear SwapBacked flag
for them. The assumption doesn't hold any more, so fix them.
Link: http://lkml.kernel.org/r/3945232c0df3dd6c4ef001976f35a95f18dcb407.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: fix some MADV_FREE issues", v5.
We are trying to use MADV_FREE in jemalloc. Several issues are found.
Without solving the issues, jemalloc can't use the MADV_FREE feature.
- Doesn't support system without swap enabled. Because if swap is off,
we can't or can't efficiently age anonymous pages. And since
MADV_FREE pages are mixed with other anonymous pages, we can't
reclaim MADV_FREE pages. In current implementation, MADV_FREE will
fallback to MADV_DONTNEED without swap enabled. But in our
environment, a lot of machines don't enable swap. This will prevent
our setup using MADV_FREE.
- Increases memory pressure. page reclaim bias file pages reclaim
against anonymous pages. This doesn't make sense for MADV_FREE pages,
because those pages could be freed easily and refilled with very
slight penality. Even page reclaim doesn't bias file pages, there is
still an issue, because MADV_FREE pages and other anonymous pages are
mixed together. To reclaim a MADV_FREE page, we probably must scan a
lot of other anonymous pages, which is inefficient. In our test, we
usually see oom with MADV_FREE enabled and nothing without it.
- Accounting. There are two accounting problems. We don't have a global
accounting. If the system is abnormal, we don't know if it's a
problem from MADV_FREE side. The other problem is RSS accounting.
MADV_FREE pages are accounted as normal anon pages and reclaimed
lazily, so application's RSS becomes bigger. This confuses our
workloads. We have monitoring daemon running and if it finds
applications' RSS becomes abnormal, the daemon will kill the
applications even kernel can reclaim the memory easily.
To address the first the two issues, we can either put MADV_FREE pages
into a separate LRU list (Minchan's previous patches and V1 patches), or
put them into LRU_INACTIVE_FILE list (suggested by Johannes). The
patchset use the second idea. The reason is LRU_INACTIVE_FILE list is
tiny nowadays and should be full of used once file pages. So we can
still efficiently reclaim MADV_FREE pages there without interference
with other anon and active file pages. Putting the pages into inactive
file list also has an advantage which allows page reclaim to prioritize
MADV_FREE pages and used once file pages. MADV_FREE pages are put into
the lru list and clear SwapBacked flag, so PageAnon(page) &&
!PageSwapBacked(page) will indicate a MADV_FREE pages. These pages will
directly freed without pageout if they are clean, otherwise normal swap
will reclaim them.
For the third issue, the previous post adds global accounting and a
separate RSS count for MADV_FREE pages. The problem is we never get
accurate accounting for MADV_FREE pages. The pages are mapped to
userspace, can be dirtied without notice from kernel side. To get
accurate accounting, we could write protect the page, but then there is
extra page fault overhead, which people don't want to pay. Jemalloc
guys have concerns about the inaccurate accounting, so this post drops
the accounting patches temporarily. The info exported to
/proc/pid/smaps for MADV_FREE pages are kept, which is the only place we
can get accurate accounting right now.
This patch (of 6):
Johannes pointed out TTU_LZFREE is unnecessary. It's true because we
always have the flag set if we want to do an unmap. For cases we don't
do an unmap, the TTU_LZFREE part of code should never run.
Also the TTU_UNMAP is unnecessary. If no other flags set (for example,
TTU_MIGRATION), an unmap is implied.
The patch includes Johannes's cleanup and dead TTU_ACTION macro removal
code
Link: http://lkml.kernel.org/r/4be3ea1bc56b26fd98a54d0a6f70bec63f6d8980.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The backoff mechanism is not needed. If we have MAX_RECLAIM_RETRIES
loops without progress, we'll OOM anyway; backing off might cut one or
two iterations off that in the rare OOM case. If we have intermittent
success reclaiming a few pages, the backoff function gets reset also,
and so is of little help in these scenarios.
We might want a backoff function for when there IS progress, but not
enough to be satisfactory. But this isn't that. Remove it.
Link: http://lkml.kernel.org/r/20170228214007.5621-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit d7f05528ee.
Now that reclaimability of a node is no longer based on the ratio
between pages scanned and theoretically reclaimable pages, we can remove
accounting tricks for pages skipped due to zone constraints.
Link: http://lkml.kernel.org/r/20170228214007.5621-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NR_PAGES_SCANNED counts number of pages scanned since the last page free
event in the allocator. This was used primarily to measure the
reclaimability of zones and nodes, and determine when reclaim should
give up on them. In that role, it has been replaced in the preceding
patches by a different mechanism.
Being implemented as an efficient vmstat counter, it was automatically
exported to userspace as well. It's however unlikely that anyone
outside the kernel is using this counter in any meaningful way.
Remove the counter and the unused pgdat_reclaimable().
Link: http://lkml.kernel.org/r/20170228214007.5621-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 246e87a939 ("memcg: fix get_scan_count() for small targets")
sought to avoid high reclaim priorities for memcg by forcing it to scan
a minimum amount of pages when lru_pages >> priority yielded nothing.
This was done at a time when reclaim decisions like dirty throttling
were tied to the priority level.
Nowadays, the only meaningful thing still tied to priority dropping
below DEF_PRIORITY - 2 is gating whether laptop_mode=1 is generally
allowed to write. But that is from an era where direct reclaim was
still allowed to call ->writepage, and kswapd nowadays avoids writes
until it's scanned every clean page in the system. Potential changes to
how quick sc->may_writepage could trigger are of little concern.
Remove the force_scan stuff, as well as the ugly multi-pass target
calculation that it necessitated.
Link: http://lkml.kernel.org/r/20170228214007.5621-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 246e87a939 ("memcg: fix get_scan_count() for small targets")
sought to avoid high reclaim priorities for kswapd by forcing it to scan
a minimum amount of pages when lru_pages >> priority yielded nothing.
Commit b95a2f2d48 ("mm: vmscan: convert global reclaim to per-memcg
LRU lists"), due to switching global reclaim to a round-robin scheme
over all cgroups, had to restrict this forceful behavior to
unreclaimable zones in order to prevent massive overreclaim with many
cgroups.
The latter patch effectively neutered the behavior completely for all
but extreme memory pressure. But in those situations we might as well
drop the reclaimers to lower priority levels. Remove the check.
Link: http://lkml.kernel.org/r/20170228214007.5621-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NUMA balancing already checks the watermarks of the target node to
decide whether it's a suitable balancing target. Whether the node is
reclaimable or not is irrelevant when we don't intend to reclaim.
Link: http://lkml.kernel.org/r/20170228214007.5621-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") allowed laptop_mode=1 to start writing not just when the
priority drops to DEF_PRIORITY - 2 but also when the node is
unreclaimable.
That appears to be a spurious change in this patch as I doubt the series
was tested with laptop_mode, and neither is that particular change
mentioned in the changelog. Remove it, it's still recent.
Link: http://lkml.kernel.org/r/20170228214007.5621-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PF_MEMALLOC direct reclaimers get throttled on a node when the sum of
all free pages in each zone fall below half the min watermark. During
the summation, we want to exclude zones that don't have reclaimables.
Checking the same pgdat over and over again doesn't make sense.
Fixes: 599d0c954f ("mm, vmscan: move LRU lists to node")
Link: http://lkml.kernel.org/r/20170228214007.5621-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: kswapd spinning on unreclaimable nodes - fixes and
cleanups".
Jia reported a scenario in which the kswapd of a node indefinitely spins
at 100% CPU usage. We have seen similar cases at Facebook.
The kernel's current method of judging its ability to reclaim a node (or
whether to back off and sleep) is based on the amount of scanned pages
in proportion to the amount of reclaimable pages. In Jia's and our
scenarios, there are no reclaimable pages in the node, however, and the
condition for backing off is never met. Kswapd busyloops in an attempt
to restore the watermarks while having nothing to work with.
This series reworks the definition of an unreclaimable node based not on
scanning but on whether kswapd is able to actually reclaim pages in
MAX_RECLAIM_RETRIES (16) consecutive runs. This is the same criteria
the page allocator uses for giving up on direct reclaim and invoking the
OOM killer. If it cannot free any pages, kswapd will go to sleep and
leave further attempts to direct reclaim invocations, which will either
make progress and re-enable kswapd, or invoke the OOM killer.
Patch #1 fixes the immediate problem Jia reported, the remainder are
smaller fixlets, cleanups, and overall phasing out of the old method.
Patch #6 is the odd one out. It's a nice cleanup to get_scan_count(),
and directly related to #5, but in itself not relevant to the series.
If the whole series is too ambitious for 4.11, I would consider the
first three patches fixes, the rest cleanups.
This patch (of 9):
Jia He reports a problem with kswapd spinning at 100% CPU when
requesting more hugepages than memory available in the system:
$ echo 4000 >/proc/sys/vm/nr_hugepages
top - 13:42:59 up 3:37, 1 user, load average: 1.09, 1.03, 1.01
Tasks: 1 total, 1 running, 0 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 12.5 sy, 0.0 ni, 85.5 id, 2.0 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 31371520 total, 30915136 used, 456384 free, 320 buffers
KiB Swap: 6284224 total, 115712 used, 6168512 free. 48192 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
76 root 20 0 0 0 0 R 100.0 0.000 217:17.29 kswapd3
At that time, there are no reclaimable pages left in the node, but as
kswapd fails to restore the high watermarks it refuses to go to sleep.
Kswapd needs to back away from nodes that fail to balance. Up until
commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") kswapd had such a mechanism. It considered zones whose
theoretically reclaimable pages it had reclaimed six times over as
unreclaimable and backed away from them. This guard was erroneously
removed as the patch changed the definition of a balanced node.
However, simply restoring this code wouldn't help in the case reported
here: there *are* no reclaimable pages that could be scanned until the
threshold is met. Kswapd would stay awake anyway.
Introduce a new and much simpler way of backing off. If kswapd runs
through MAX_RECLAIM_RETRIES (16) cycles without reclaiming a single
page, make it back off from the node. This is the same number of shots
direct reclaim takes before declaring OOM. Kswapd will go to sleep on
that node until a direct reclaimer manages to reclaim some pages, thus
proving the node reclaimable again.
[hannes@cmpxchg.org: check kswapd failure against the cumulative nr_reclaimed count]
Link: http://lkml.kernel.org/r/20170306162410.GB2090@cmpxchg.org
[shakeelb@google.com: fix condition for throttle_direct_reclaim]
Link: http://lkml.kernel.org/r/20170314183228.20152-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20170228214007.5621-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Jia He <hejianet@gmail.com>
Tested-by: Jia He <hejianet@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Each slab kmem cache has per cpu array caches. The array caches are
created when the kmem_cache is created, either via kmem_cache_create()
or lazily when the first object is allocated in context of a kmem
enabled memcg. Array caches are replaced by writing to /proc/slabinfo.
Array caches are protected by holding slab_mutex or disabling
interrupts. Array cache allocation and replacement is done by
__do_tune_cpucache() which holds slab_mutex and calls
kick_all_cpus_sync() to interrupt all remote processors which confirms
there are no references to the old array caches.
IPIs are needed when replacing array caches. But when creating a new
array cache, there's no need to send IPIs because there cannot be any
references to the new cache. Outside of memcg kmem accounting these
IPIs occur at boot time, so they're not a problem. But with memcg kmem
accounting each container can create kmem caches, so the IPIs are
wasteful.
Avoid unnecessary IPIs when creating array caches.
Test which reports the IPI count of allocating slab in 10000 memcg:
import os
def ipi_count():
with open("/proc/interrupts") as f:
for l in f:
if 'Function call interrupts' in l:
return int(l.split()[1])
def echo(val, path):
with open(path, "w") as f:
f.write(val)
n = 10000
os.chdir("/mnt/cgroup/memory")
pid = str(os.getpid())
a = ipi_count()
for i in range(n):
os.mkdir(str(i))
echo("1G\n", "%d/memory.limit_in_bytes" % i)
echo("1G\n", "%d/memory.kmem.limit_in_bytes" % i)
echo(pid, "%d/cgroup.procs" % i)
open("/tmp/x", "w").close()
os.unlink("/tmp/x")
b = ipi_count()
print "%d loops: %d => %d (+%d ipis)" % (n, a, b, b-a)
echo(pid, "cgroup.procs")
for i in range(n):
os.rmdir(str(i))
patched: 10000 loops: 1069 => 1170 (+101 ipis)
unpatched: 10000 loops: 1192 => 48933 (+47741 ipis)
Link: http://lkml.kernel.org/r/20170416214544.109476-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull iov_iter updates from Al Viro:
"Cleanups that sat in -next + -stable fodder that has just missed 4.11.
There's more iov_iter work in my local tree, but I'd prefer to push
the stuff that had been in -next first"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
iov_iter: don't revert iov buffer if csum error
generic_file_read_iter(): make use of iov_iter_revert()
generic_file_direct_write(): make use of iov_iter_revert()
orangefs: use iov_iter_revert()
sctp: switch to copy_from_iter_full()
net/9p: switch to copy_from_iter_full()
switch memcpy_from_msg() to copy_from_iter_full()
rds: make use of iov_iter_revert()
- drop now unneeded is_vmalloc_or_module() check; Laura Abbott
- use enum instead of literals for stack frame API; Sahara
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Kees Cook <kees@outflux.net>
iQIcBAABCgAGBQJZB39WAAoJEIly9N/cbcAmVJ8QALC0teqysiyml1CuxruXoXNj
wPfwOJMypdXTYtL70ZKqi6Mboqrg01HTBeSNZjoNDvpHtsePlPVLjgDZ9ehcgokb
nTQ23zJguV0nOLn32yKSJ1KupuxGMzW9RtrjOWH6w8nixff42vCHANY8+j5/Nx4R
L4uLEPhA2ay35ddMeJMaNE8MAw7YS/C4enWu15CDbAjv++bVPoKwvqUchBoIPRx5
ZNjEUlAdnsv8IfccUea0Xz8CrBshe0kN4SGQvPqvaff2Orsk2FDHoK5wk6MaNN8L
Dx2yZI5vxPbe6JYVEhvUxxGevuhmouTXf3UxBShOaggc4++/nuJ75S/nDIBosGrs
EzWkRGn2JLr0+mKTCrjhbxBocstOsEIW6XSfEE2Sx4bBdj4LkcGoR/cCmTC8vjoL
82VaUnCVWyhwRgkowi4yJzE6iG5yQ8r6NpAPZsfYkgeOLFQ9uAy6pSceFRa1w38q
vrysB+e0Dof6HRCd3UvbvGo94+ev4yc8niS70nFsVGhntRQYgPxKPRrzW+HdyWVp
zA49P0FJgZu8a5jAbHwgv/J7ff2pfeM+ZhEX5XqR2EaMjAqLFI5QPJTFheSfjz6q
2Nbpbnq8PuIR4f1dgp3xbC1a2Lj8mzq+ek+SLMGAskMK+su8Niw38JQT/WGncqWy
H134mG6dbjGH2HhGOQjD
=zkvy
-----END PGP SIGNATURE-----
Merge tag 'usercopy-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardened usercopy updates from Kees Cook:
"A couple hardened usercopy changes:
- drop now unneeded is_vmalloc_or_module() check (Laura Abbott)
- use enum instead of literals for stack frame API (Sahara)"
* tag 'usercopy-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mm/usercopy: Drop extra is_vmalloc_or_module() check
usercopy: Move enum for arch_within_stack_frames()
guide for user-space API documents, rather sparsely populated at the
moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of Documentation/
to fix comments elsewhere in the tree; I have acks for those where I could
get them.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJZB1elAAoJEI3ONVYwIuV6wUIQAJSM/4rNdj6z+GXeWhRfbsOo
vqqVYluvXQIJaaqdsy9dgcfThhOXWYsPyVF6Xd+bDJpwF3BMZYbX1CI1Mo3kRD+7
9+Pf68cYSHRoU3l/sFI8q0zfKbHtmFteIvnRQoFtRaExqgTR8glUfxNDyN9XuNAZ
3naS4qMZivM4gjMcSpIB/wFOQpV+6qVIs6VTFLdCC8wodT3W/Wmb+bqrCVJ0twbB
t8jJeYHt2wsiTdqrKU+VilAUAZ1Lby+DNfeWrO18rC1ohktPyUzOGg8JmTKUBpVO
qj1OJwD6abuaNh/J9bXsh8u0OrVrBKWjVrhq9IFYDlm92fu3Bgr6YeoaVPEpcklt
jdlgZnWs9/oXa6d32aMc9F7mP9a0Q1qikFTYINhaHQZCb4VDRuQ9hCSuqWm5jlVy
lmVAoxLa0zSdOoXaYuO3HC99ku1cIn814CXMDz/IwKXkqUCV+zl+H3AGkvxGyQ5M
eblw2TnQnc6e1LRcxt5bgpFR1JYMbCJhu0U5XrNFueQV8ReB15dvL7h4y21dWJKF
2Sr83rwfG1rpZQiSqCjOXxIzuXbEGH3+a+zCDV5IHhQRt/VNDOt2hgmcyucSSJ5h
5GRFYgTlGvoT/6LdIT39QooHB+4tSDRtEQ6lh0q2ZtVV2rfG/I6/PR5sUbWM65SN
vAfctRm2afHLhdonSX5O
=41m+
-----END PGP SIGNATURE-----
Merge tag 'docs-4.12' of git://git.lwn.net/linux
Pull documentation update from Jonathan Corbet:
"A reasonably busy cycle for documentation this time around. There is a
new guide for user-space API documents, rather sparsely populated at
the moment, but it's a start. Markus improved the infrastructure for
converting diagrams. Mauro has converted much of the USB documentation
over to RST. Plus the usual set of fixes, improvements, and tweaks.
There's a bit more than the usual amount of reaching out of
Documentation/ to fix comments elsewhere in the tree; I have acks for
those where I could get them"
* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
docs: Fix a couple typos
docs: Fix a spelling error in vfio-mediated-device.txt
docs: Fix a spelling error in ioctl-number.txt
MAINTAINERS: update file entry for HSI subsystem
Documentation: allow installing man pages to a user defined directory
Doc/PM: Sync with intel_powerclamp code behavior
zr364xx.rst: usb/devices is now at /sys/kernel/debug/
usb.rst: move documentation from proc_usb_info.txt to USB ReST book
convert philips.txt to ReST and add to media docs
docs-rst: usb: update old usbfs-related documentation
arm: Documentation: update a path name
docs: process/4.Coding.rst: Fix a couple of document refs
docs-rst: fix usb cross-references
usb: gadget.h: be consistent at kernel doc macros
usb: composite.h: fix two warnings when building docs
usb: get rid of some ReST doc build errors
usb.rst: get rid of some Sphinx errors
usb/URB.txt: convert to ReST and update it
usb/persist.txt: convert to ReST and add to driver-api book
usb/hotplug.txt: convert to ReST and add to driver-api book
...
Pull x86 mm updates from Ingo Molnar:
"The main x86 MM changes in this cycle were:
- continued native kernel PCID support preparation patches to the TLB
flushing code (Andy Lutomirski)
- various fixes related to 32-bit compat syscall returning address
over 4Gb in applications, launched from 64-bit binaries - motivated
by C/R frameworks such as Virtuozzo. (Dmitry Safonov)
- continued Intel 5-level paging enablement: in particular the
conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)
- x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)
- ... plus misc updates, fixes and cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
x86/mm: Fix flush_tlb_page() on Xen
x86/mm: Make flush_tlb_mm_range() more predictable
x86/mm: Remove flush_tlb() and flush_tlb_current_task()
x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
x86/mm/64: Fix crash in remove_pagetable()
Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
x86/boot/e820: Remove a redundant self assignment
x86/mm: Fix dump pagetables for 4 levels of page tables
x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
x86/espfix: Add support for 5-level paging
x86/kasan: Extend KASAN to support 5-level paging
x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
x86/paravirt: Add 5-level support to the paravirt code
x86/mm: Define virtual memory map for 5-level paging
x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
x86/boot: Detect 5-level paging support
x86/mm/numa: Remove numa_nodemask_from_meminfo()
...
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- a big round of FUTEX_UNLOCK_PI improvements, fixes, cleanups and
general restructuring
- lockdep updates such as new checks for lock_downgrade()
- introduce the new atomic_try_cmpxchg() locking API and use it to
optimize refcount code generation
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
MAINTAINERS: Add FUTEX SUBSYSTEM
futex: Clarify mark_wake_futex memory barrier usage
futex: Fix small (and harmless looking) inconsistencies
futex: Avoid freeing an active timer
rtmutex: Plug preempt count leak in rt_mutex_futex_unlock()
rtmutex: Fix more prio comparisons
rtmutex: Fix PI chain order integrity
sched,tracing: Update trace_sched_pi_setprio()
sched/rtmutex: Refactor rt_mutex_setprio()
rtmutex: Clean up
sched/deadline/rtmutex: Dont miss the dl_runtime/dl_period update
sched/rtmutex/deadline: Fix a PI crash for deadline tasks
rtmutex: Deboost before waking up the top waiter
locking/ww-mutex: Limit stress test to 2 seconds
locking/atomic: Fix atomic_try_cmpxchg() semantics
lockdep: Fix per-cpu static objects
futex: Drop hb->lock before enqueueing on the rtmutex
futex: Futex_unlock_pi() determinism
futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()
...
Pull AVR32 removal from Hans-Christian Noren Egtvedt:
"This will remove support for AVR32 architecture from the kernel and
clean away the most obvious architecture related parts. Removing dead
code in drivers is the next step"
Notes from previous discussion about this:
"The AVR32 architecture is not keeping up with the development of the
kernel, and since it shares so much of the drivers with Atmel ARM SoC,
it is starting to hinder these drivers to develop swiftly.
Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now
Microchip).
Finally, the GCC toolchain is stuck at version 4.2.x, and has not
received any patches since the last release from Atmel;
4.2.4-atmel.1.1.3.avr32linux.1.
When building kernel v4.10, this toolchain is no longer able to
properly link the network stack.
Haavard and I have came to the conclusion that we feel keeping AVR32
on life support offers more obstacles for Atmel ARMs, than it gives
joy to AVR32 users. I also suspect there are very few AVR32 users left
today, if anybody at all"
That discussion was acked by Andy Shevchenko, Boris Brezillon, Nicolas
Ferre, and Haavard Skinnemoen.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
mm: remove AVR32 arch special handling in mm/Kconfig
lib: remove check for AVR32 arch in test_user_copy
lib: remove AVR32 entry in Kconfig.debug compile with frame pointers
scripts: remove AVR32 support from checkstack.pl
docs: remove all references to AVR32 architecture
avr32: remove support for AVR32 architecture
Pull uaccess unification updates from Al Viro:
"This is the uaccess unification pile. It's _not_ the end of uaccess
work, but the next batch of that will go into the next cycle. This one
mostly takes copy_from_user() and friends out of arch/* and gets the
zero-padding behaviour in sync for all architectures.
Dealing with the nocache/writethrough mess is for the next cycle;
fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
sold on access_ok() in there, BTW; just not in this pile), same for
reducing __copy_... callsites, strn*... stuff, etc. - there will be a
pile about as large as this one in the next merge window.
This one sat in -next for weeks. -3KLoC"
* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
HAVE_ARCH_HARDENED_USERCOPY is unconditional now
CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
m32r: switch to RAW_COPY_USER
hexagon: switch to RAW_COPY_USER
microblaze: switch to RAW_COPY_USER
get rid of padding, switch to RAW_COPY_USER
ia64: get rid of copy_in_user()
ia64: sanitize __access_ok()
ia64: get rid of 'segment' argument of __do_{get,put}_user()
ia64: get rid of 'segment' argument of __{get,put}_user_check()
ia64: add extable.h
powerpc: get rid of zeroing, switch to RAW_COPY_USER
esas2r: don't open-code memdup_user()
alpha: fix stack smashing in old_adjtimex(2)
don't open-code kernel_setsockopt()
mips: switch to RAW_COPY_USER
mips: get rid of tail-zeroing in primitives
mips: make copy_from_user() zero tail explicitly
mips: clean and reorder the forest of macros...
mips: consolidate __invoke_... wrappers
...
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
AVR32 architecture has been removed from the Linux kernel sources, hence
clean up the special handling setting two quicklists by default in
mm/Kconfig.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
The x86 conversion to the generic GUP code included a small change which causes
crashes and data corruption in the pmem code - not good.
The root cause is that the /dev/pmem driver code implicitly relies on the x86
get_user_pages() implementation doing a get_page() on the page refcount, because
get_page() does a get_zone_device_page() which properly refcounts pmem's separate
page struct arrays that are not present in the regular page struct structures.
(The pmem driver does this because it can cover huge memory areas.)
But the x86 conversion to the generic GUP code changed the get_page() to
page_cache_get_speculative() which is faster but doesn't do the
get_zone_device_page() call the pmem code relies on.
One way to solve the regression would be to change the generic GUP code to use
get_page(), but that would slow things down a bit and punish other generic-GUP
using architectures for an x86-ism they did not care about. (Arguably the pmem
driver was probably not working reliably for them: but nvdimm is an Intel
feature, so non-x86 exposure is probably still limited.)
So restructure the pmem code's interface with the MM instead: get rid of the
get/put_zone_device_page() distinction, integrate put_zone_device_page() into
__put_page() and and restructure the pmem completion-wait and teardown machinery:
Kirill points out that the calls to {get,put}_dev_pagemap() can be
removed from the mm fast path if we take a single get_dev_pagemap()
reference to signify that the page is alive and use the final put of the
page to drop that reference.
This does require some care to make sure that any waits for the
percpu_ref to drop to zero occur *after* devm_memremap_page_release(),
since it now maintains its own elevated reference.
This speeds up things while also making the pmem refcounting more robust going
forward.
Suggested-by: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Kirill Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/149339998297.24933.1129582806028305912.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, file system's writepages() function must not fail with an
ENOMEM, since if they do, it's possible for buffered data to be lost.
This is because on a data integrity writeback writepages() gets called
but once, and if it returns ENOMEM, if you're lucky the error will get
reflected back to the userspace process calling fsync(). If you
aren't lucky, the user is unmounting the file system, and the dirty
pages will simply be lost.
For this reason, file system code generally will use GFP_NOFS, and in
some cases, will retry the allocation in a loop, on the theory that
"kernel livelocks are temporary; data loss is forever".
Unfortunately, this can indeed cause livelocks, since inside the
writepages() call, the file system is holding various mutexes, and
these mutexes may prevent the OOM killer from killing its targetted
victim if it is also holding on to those mutexes.
A better solution would be to allow writepages() to call the memory
allocator with flags that give greater latitude to the allocator to
fail, and then release its locks and return ENOMEM, and in the case of
background writeback, the writes can be retried at a later time. In
the case of data-integrity writeback retry after waiting a brief
amount of time.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 2947ba054a.
Dan Williams reported dax-pmem kernel warnings with the following signature:
WARNING: CPU: 8 PID: 245 at lib/percpu-refcount.c:155 percpu_ref_switch_to_atomic_rcu+0x1f5/0x200
percpu ref (dax_pmem_percpu_release [dax_pmem]) <= 0 (0) after switching to atomic
... and bisected it to this commit, which suggests possible memory corruption
caused by the x86 fast-GUP conversion.
He also pointed out:
"
This is similar to the backtrace when we were not properly handling
pud faults and was fixed with this commit: 220ced1676 "mm: fix
get_user_pages() vs device-dax pud mappings"
I've found some missing _devmap checks in the generic
get_user_pages_fast() path, but this does not fix the regression
[...]
"
So given that there are known bugs, and a pretty robust looking bisection
points to this commit suggesting that are unknown bugs in the conversion
as well, revert it for the time being - we'll re-try in v4.13.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aneesh.kumar@linux.vnet.ibm.com
Cc: dann.frazier@canonical.com
Cc: dave.hansen@intel.com
Cc: steve.capper@linaro.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 6afcf8ef0c ("mm, compaction: fix NR_ISOLATED_* stats for pfn
based migration") moved the dec_node_page_state() call (along with the
page_is_file_cache() call) to after putback_lru_page().
But page_is_file_cache() can change after putback_lru_page() is called,
so it should be called before putback_lru_page(), as it was before that
patch, to prevent NR_ISOLATE_* stats from going negative.
Without this fix, non-CONFIG_SMP kernels end up hanging in the
while(too_many_isolated()) { congestion_wait() } loop in
shrink_active_list() due to the negative stats.
Mem-Info:
active_anon:32567 inactive_anon:121 isolated_anon:1
active_file:6066 inactive_file:6639 isolated_file:4294967295
^^^^^^^^^^
unevictable:0 dirty:115 writeback:0 unstable:0
slab_reclaimable:2086 slab_unreclaimable:3167
mapped:3398 shmem:18366 pagetables:1145 bounce:0
free:1798 free_pcp:13 free_cma:0
Fixes: 6afcf8ef0c ("mm, compaction: fix NR_ISOLATED_* stats for pfn based migration")
Link: http://lkml.kernel.org/r/1492683865-27549-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Ming Ling <ming.ling@spreadtrum.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 374ad05ab6.
While the patch worked great for userspace allocations, the fact that
softirq loses the per-cpu allocator caused problems. It needs to be
redone taking into account that a separate list is needed for hard/soft
IRQs or alternatively find a cheap way of detecting reentry due to an
interrupt. Both are possible but sufficiently tricky that it shouldn't
be rushed.
Jesper had one method for allowing softirqs but reported that the cost
was high enough that it performed similarly to a plain revert. His
figures for netperf TCP_STREAM were as follows
Baseline v4.10.0 : 60316 Mbit/s
Current 4.11.0-rc6: 47491 Mbit/s
Jesper's patch : 60662 Mbit/s
This patch : 60106 Mbit/s
As this is a regression, I wish to revert to noirq allocator for now and
go back to the drawing board.
Link: http://lkml.kernel.org/r/20170415145350.ixy7vtrzdzve57mh@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Tariq Toukan <ttoukan.linux@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop 'parent' argument of bdi_register() and bdi_register_va(). It is
always NULL.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that all backing_dev_info structure are allocated separately, we can
drop some unused functions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
MTD will want to call bdi_alloc_node() and bdi_put() directly. Export
these functions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Most users will want to unregister bdi when dropping last reference to a
bdi. Only a few users (like block devices) want to play more complex
tricks with bdi registration and unregistration. So unregister bdi when
the last reference to bdi is dropped and just make sure we don't
unregister the bdi the second time if it is already unregistered.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add function that registers bdi and takes va_list instead of variable
number of arguments.
Add bdi_alloc() as simple wrapper for NUMA-unaware users allocating BDI.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Geert has reported a freeze during PM resume and some additional
debugging has shown that the device_resume worker cannot make a forward
progress because it waits for an event which is stuck waiting in
drain_all_pages:
INFO: task kworker/u4:0:5 blocked for more than 120 seconds.
Not tainted 4.11.0-rc7-koelsch-00029-g005882e53d62f25d-dirty #3476
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kworker/u4:0 D 0 5 2 0x00000000
Workqueue: events_unbound async_run_entry_fn
__schedule
schedule
schedule_timeout
wait_for_common
dpm_wait_for_superior
device_resume
async_resume
async_run_entry_fn
process_one_work
worker_thread
kthread
[...]
bash D 0 1703 1694 0x00000000
__schedule
schedule
schedule_timeout
wait_for_common
flush_work
drain_all_pages
start_isolate_page_range
alloc_contig_range
cma_alloc
__alloc_from_contiguous
cma_allocator_alloc
__dma_alloc
arm_dma_alloc
sh_eth_ring_init
sh_eth_open
sh_eth_resume
dpm_run_callback
device_resume
dpm_resume
dpm_resume_end
suspend_devices_and_enter
pm_suspend
state_store
kernfs_fop_write
__vfs_write
vfs_write
SyS_write
[...]
Showing busy workqueues and worker pools:
[...]
workqueue mm_percpu_wq: flags=0xc
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=0/0
delayed: drain_local_pages_wq, vmstat_update
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=0/0
delayed: drain_local_pages_wq BAR(1703), vmstat_update
Tetsuo has properly noted that mm_percpu_wq is created as WQ_FREEZABLE
so it is frozen this early during resume so we are effectively
deadlocked. Fix this by dropping WQ_FREEZABLE when creating
mm_percpu_wq. We really want to have it operational all the time.
Fixes: ce612879dd ("mm: move pcp and lru-pcp draining into single wq")
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section. Of course, that is not the
case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.
However, there is a phrase for this, namely "type safety". This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
Dumazet, in order to help people familiar with the old name find
the new one. ]
Acked-by: David Rientjes <rientjes@google.com>
Frameworks (e.g. Ion) may want to iterate over each possible CMA area to
allow for enumeration. Introduce a function to allow a callback.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it
useful to have an explicit name attached to each region. Store the name
in each CMA structure.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MM-notifier code currently dynamically initializes the srcu_struct
named "srcu" at subsys_initcall() time, and includes a BUG_ON() to check
this initialization in do_mmu_notifier_register(). Unfortunately, there
is no foolproof way to verify that an srcu_struct has been initialized,
given the possibility of an srcu_struct being allocated on the stack or
on the heap. This means that creating an srcu_struct_is_initialized()
function is not a reasonable course of action. Nor is peppering
do_mmu_notifier_register() with SRCU-specific #ifdefs an attractive
alternative.
This commit therefore uses DEFINE_STATIC_SRCU() to initialize
this srcu_struct at compile time, thus eliminating both the
subsys_initcall()-time initialization and the runtime BUG_ON().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-mm@kvack.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Vegard Nossum <vegard.nossum@oracle.com>
Now 64K page system, zsamlloc has 257 classes so 8 class bit is not
enough. With that, it corrupts the system when zsmalloc stores
65536byte data(ie, index number 256) so that this patch increases class
bit for simple fix for stable backport. We should clean up this mess
soon.
index size
0 32
1 288
..
..
204 52256
256 65536
Fixes: 3783689a1 ("zsmalloc: introduce zspage structure")
Link: http://lkml.kernel.org/r/1492042622-12074-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both MADV_DONTNEED and MADV_FREE handled with down_read(mmap_sem).
It's critical to not clear pmd intermittently while handling MADV_FREE
to avoid race with MADV_DONTNEED:
CPU0: CPU1:
madvise_free_huge_pmd()
pmdp_huge_get_and_clear_full()
madvise_dontneed()
zap_pmd_range()
pmd_trans_huge(*pmd) == 0 (without ptl)
// skip the pmd
set_pmd_at();
// pmd is re-established
It results in MADV_DONTNEED skipping the pmd, leaving it not cleared.
It violates MADV_DONTNEED interface and can result is userspace
misbehaviour.
Basically it's the same race as with numa balancing in
change_huge_pmd(), but a bit simpler to mitigate: we don't need to
preserve dirty/young flags here due to MADV_FREE functionality.
[kirill.shutemov@linux.intel.com: Urgh... Power is special again]
Link: http://lkml.kernel.org/r/20170303102636.bhd2zhtpds4mt62a@black.fi.intel.com
Link: http://lkml.kernel.org/r/20170302151034.27829-4-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case prot_numa, we are under down_read(mmap_sem). It's critical to
not clear pmd intermittently to avoid race with MADV_DONTNEED which is
also under down_read(mmap_sem):
CPU0: CPU1:
change_huge_pmd(prot_numa=1)
pmdp_huge_get_and_clear_notify()
madvise_dontneed()
zap_pmd_range()
pmd_trans_huge(*pmd) == 0 (without ptl)
// skip the pmd
set_pmd_at();
// pmd is re-established
The race makes MADV_DONTNEED miss the huge pmd and don't clear it
which may break userspace.
Found by code analysis, never saw triggered.
Link: http://lkml.kernel.org/r/20170302151034.27829-3-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "thp: fix few MADV_DONTNEED races"
For MADV_DONTNEED to work properly with huge pages, it's critical to not
clear pmd intermittently unless you hold down_write(mmap_sem).
Otherwise MADV_DONTNEED can miss the THP which can lead to userspace
breakage.
See example of such race in commit message of patch 2/4.
All these races are found by code inspection. I haven't seen them
triggered. I don't think it's worth to apply them to stable@.
This patch (of 4):
Restructure code in preparation for a fix.
Link: http://lkml.kernel.org/r/20170302151034.27829-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stress testing of the current z3fold implementation on a 8-core system
revealed it was possible that a z3fold page deleted from its unbuddied
list in z3fold_alloc() would be put on another unbuddied list by
z3fold_free() while z3fold_alloc() is still processing it. This has
been introduced with commit 5a27aa822 ("z3fold: add kref refcounting")
due to the removal of special handling of a z3fold page not on any list
in z3fold_free().
To fix this, the z3fold page lock should be taken in z3fold_alloc()
before the pool lock is released. To avoid deadlocking, we just try to
lock the page as soon as we get a hold of it, and if trylock fails, we
drop this page and take the next one.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: <Oleksiy.Avramchenko@sony.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the case that compat_get_bitmap fails we do not want to copy the
bitmap to the user as it will contain uninitialized stack data and leak
sensitive data.
Signed-off-by: Chris Salls <salls@cs.ucsb.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently have 2 specific WQ_RECLAIM workqueues in the mm code.
vmstat_wq for updating pcp stats and lru_add_drain_wq dedicated to drain
per cpu lru caches. This seems more than necessary because both can run
on a single WQ. Both do not block on locks requiring a memory
allocation nor perform any allocations themselves. We will save one
rescuer thread this way.
On the other hand drain_all_pages() queues work on the system wq which
doesn't have rescuer and so this depend on memory allocation (when all
workers are stuck allocating and new ones cannot be created).
Initially we thought this would be more of a theoretical problem but
Hugh Dickins has reported:
: 4.11-rc has been giving me hangs after hours of swapping load. At
: first they looked like memory leaks ("fork: Cannot allocate memory");
: but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
: before looking at /proc/meminfo one time, and the stat_refresh stuck
: in D state, waiting for completion of flush_work like many kworkers.
: kthreadd waiting for completion of flush_work in drain_all_pages().
This worker should be using WQ_RECLAIM as well in order to guarantee a
forward progress. We can reuse the same one as for lru draining and
vmstat.
Link: http://lkml.kernel.org/r/20170307131751.24936-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We got need_resched() warnings in swap_cgroup_swapoff() because
swap_cgroup_ctrl[type].length is particularly large.
Reschedule when needed.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704061315270.80559@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Setting thp defrag mode of "defer+madvise" actually sets "defer" in the
kernel due to the name similarity and the out-of-order way the string is
checked in defrag_store().
Check the string in the correct order so that
TRANSPARENT_HUGEPAGE_DEFRAG_KSWAPD_OR_MADV_FLAG is set appropriately for
"defer+madvise".
Fixes: 21440d7eb9 ("mm, thp: add new defer+madvise defrag option")
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1704051814420.137626@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Doug Smythies reports oops with KSM in this backtrace, I've been seeing
the same:
page_vma_mapped_walk+0xe6/0x5b0
page_referenced_one+0x91/0x1a0
rmap_walk_ksm+0x100/0x190
rmap_walk+0x4f/0x60
page_referenced+0x149/0x170
shrink_active_list+0x1c2/0x430
shrink_node_memcg+0x67a/0x7a0
shrink_node+0xe1/0x320
kswapd+0x34b/0x720
Just as observed in commit 4b0ece6fa0 ("mm: migrate: fix
remove_migration_pte() for ksm pages"), you cannot use page->index
calculations on ksm pages.
page_vma_mapped_walk() is relying on __vma_address(), where a ksm page
can lead it off the end of the page table, and into whatever nonsense is
in the next page, ending as an oops inside check_pte()'s pte_page().
KSM tells page_vma_mapped_walk() exactly where to look for the page, it
does not need any page->index calculation: and that's so also for all
the normal and file and anon pages - just not for THPs and their
subpages. Get out early in most cases: instead of a PageKsm test, move
down the earlier not-THP-page test, as suggested by Kirill.
I'm also slightly worried that this loop can stray into other vmas, so
added a vm_end test to prevent surprises; though I have not imagined
anything worse than a very contrived case, in which a page mlocked in
the next vma might be reclaimed because it is not mlocked in this vma.
Fixes: ace71a19ce ("mm: introduce page_vma_mapped_walk()")
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1704031104400.1118@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We've added a considerable amount of fixes for stalls and issues
with the blk-mq scheduling in the 4.11 series since forking
off the for-4.12/block branch. We need to do improvements on
top of that for 4.12, so pull in the previous fixes to make
our lives easier going forward.
Signed-off-by: Jens Axboe <axboe@fb.com>
Previously virt_addr_valid() was insufficient to validate if virt_to_page()
could be called on an address on arm64. This has since been fixed up so
there is no need for the extra check. Drop it.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add memblock_cap_memory_range() which will remove all the memblock regions
except the memory range specified in the arguments. In addition, rework is
done on memblock_mem_limit_remove_map() to re-implement it using
memblock_cap_memory_range().
This function, like memblock_mem_limit_remove_map(), will not remove
memblocks with MEMMAP_NOMAP attribute as they may be mapped and accessed
later as "device memory."
See the commit a571d4eb55 ("mm/memblock.c: add new infrastructure to
address the mem limit issue").
This function is used, in a succeeding patch in the series of arm64 kdump
suuport, to limit the range of usable memory, or System RAM, on crash dump
kernel.
(Please note that "mem=" parameter is of little use for this purpose.)
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Dennis Chen <dennis.chen@arm.com>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This function, with a combination of memblock_mark_nomap(), will be used
in a later kdump patch for arm64 when it temporarily isolates some range
of memory from the other memory blocks in order to create a specific
kernel mapping at boot time.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch moves the arch_within_stack_frames() return value enum up in
the header files so that per-architecture implementations can reuse the
same return values.
Signed-off-by: Sahara <keun-o.park@darkmatter.ae>
Signed-off-by: James Morse <james.morse@arm.com>
[kees: adjusted naming and commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>
Relying on free_reserved_area() to call ftrace to free init memory proved to
not be sufficient. The issue is that on x86, when debug_pagealloc is
enabled, the init memory is not freed, but simply set as not present. Since
ftrace was uninformed of this, starting function tracing still tries to
update pages that are not present according to the page tables, causing
ftrace to bug, as well as killing the kernel itself.
Instead of relying on free_reserved_area(), have init/main.c call ftrace
directly just before it frees the init memory. Then it needs to use
__init_begin and __init_end to know where the init memory location is.
Looking at all archs (and testing what I can), it appears that this should
work for each of them.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Changes to hugetlbfs reservation maps is a two step process. The first
step is a call to region_chg to determine what needs to be changed, and
prepare that change. This should be followed by a call to call to
region_add to commit the change, or region_abort to abort the change.
The error path in hugetlb_reserve_pages called region_abort after a
failed call to region_chg. As a result, the adds_in_progress counter in
the reservation map is off by 1. This is caught by a VM_BUG_ON in
resv_map_release when the reservation map is freed.
syzkaller fuzzer (when using an injected kmalloc failure) found this
bug, that resulted in the following:
kernel BUG at mm/hugetlb.c:742!
Call Trace:
hugetlbfs_evict_inode+0x7b/0xa0 fs/hugetlbfs/inode.c:493
evict+0x481/0x920 fs/inode.c:553
iput_final fs/inode.c:1515 [inline]
iput+0x62b/0xa20 fs/inode.c:1542
hugetlb_file_setup+0x593/0x9f0 fs/hugetlbfs/inode.c:1306
newseg+0x422/0xd30 ipc/shm.c:575
ipcget_new ipc/util.c:285 [inline]
ipcget+0x21e/0x580 ipc/util.c:639
SYSC_shmget ipc/shm.c:673 [inline]
SyS_shmget+0x158/0x230 ipc/shm.c:657
entry_SYSCALL_64_fastpath+0x1f/0xc2
RIP: resv_map_release+0x265/0x330 mm/hugetlb.c:742
Link: http://lkml.kernel.org/r/1490821682-23228-1-git-send-email-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disable kasan after the first report. There are several reasons for
this:
- Single bug quite often has multiple invalid memory accesses causing
storm in the dmesg.
- Write OOB access might corrupt metadata so the next report will print
bogus alloc/free stacktraces.
- Reports after the first easily could be not bugs by itself but just
side effects of the first one.
Given that multiple reports usually only do harm, it makes sense to
disable kasan after the first one. If user wants to see all the
reports, the boot-time parameter kasan_multi_shot must be used.
[aryabinin@virtuozzo.com: wrote changelog and doc, added missing include]
Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A section name for .data..ro_after_init was added by both:
commit d07a980c1b ("s390: add proper __ro_after_init support")
and
commit d7c19b066d ("mm: kmemleak: scan .data.ro_after_init")
The latter adds incorrect wrapping around the existing s390 section, and
came later. I'd prefer the s390 naming, so this moves the s390-specific
name up to the asm-generic/sections.h and renames the section as used by
kmemleak (and in the future, kernel/extable.c).
Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390 parts]
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Eddie Kovsky <ewk@edkovsky.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0a6b76dd23 ("mm: workingset: make shadow node shrinker memcg
aware") enabled cgroup-awareness in the shadow node shrinker, but forgot
to also enable cgroup-awareness in the list_lru the shadow nodes sit on.
Consequently, all shadow nodes are sitting on a global (per-NUMA node)
list, while the shrinker applies the limits according to the amount of
cache in the cgroup its shrinking. The result is excessive pressure on
the shadow nodes from cgroups that have very little cache.
Enable memcg-mode on the shadow node LRUs, such that per-cgroup limits
are applied to per-cgroup lists.
Fixes: 0a6b76dd23 ("mm: workingset: make shadow node shrinker memcg aware")
Link: http://lkml.kernel.org/r/20170322005320.8165-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@tarantool.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huge pages are accounted as single units in the memcg's "file_mapped"
counter. Account the correct number of base pages, like we do in the
corresponding node counter.
Link: http://lkml.kernel.org/r/20170322005111.3156-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:
WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
Modules linked in:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
Hardware name: Freescale Layerscape 2088A RDB Board (DT)
task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
PC is at drain_all_pages+0x244/0x25c
LR is at start_isolate_page_range+0x14c/0x1f0
[...]
drain_all_pages+0x244/0x25c
start_isolate_page_range+0x14c/0x1f0
alloc_contig_range+0xec/0x354
cma_alloc+0x100/0x1fc
dma_alloc_from_contiguous+0x3c/0x44
atomic_pool_init+0x7c/0x208
arm64_dma_init+0x44/0x4c
do_one_initcall+0x38/0x128
kernel_init_freeable+0x1a0/0x240
kernel_init+0x10/0xfc
ret_from_fork+0x10/0x20
Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.
Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Yang Li <pku.leo@gmail.com>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 383776fa75 ("locking/lockdep: Handle statically initialized
PER_CPU locks properly") we try to collapse per-cpu locks into a single
class by giving them all the same key. For this key we choose the canonical
address of the per-cpu object, which would be the offset into the per-cpu
area.
This has two problems:
- there is a case where we run !0 lock->key through static_obj() and
expect this to pass; it doesn't for canonical pointers.
- 0 is a valid canonical address.
Cure both issues by redefining the canonical address as the address of the
per-cpu variable on the boot CPU.
Since I didn't want to rely on CPU0 being the boot-cpu, or even existing at
all, track the boot CPU in a variable.
Fixes: 383776fa75 ("locking/lockdep: Handle statically initialized PER_CPU locks properly")
Reported-by: kernel test robot <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-mm@kvack.org
Cc: wfg@linux.intel.com
Cc: kernel test robot <fengguang.wu@intel.com>
Cc: LKP <lkp@01.org>
Link: http://lkml.kernel.org/r/20170320114108.kbvcsuepem45j5cr@hirez.programming.kicks-ass.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adding a hook into free_reserve_area() that informs ftrace that boot up init
text is being free, lets ftrace safely remove those init functions from its
records, which keeps ftrace from trying to modify text that no longer
exists.
Note, this still does not allow for tracing .init text of modules, as
modules require different work for freeing its init code.
Link: http://lkml.kernel.org/r/1488502497.7212.24.camel@linux.intel.com
Cc: linux-mm@kvack.org
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Requested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Rename cgwb_bdi_destroy() to cgwb_bdi_unregister() as it gets called
from bdi_unregister() which is not necessarily called from bdi_destroy()
and thus the name is somewhat misleading.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we wait for all cgwbs to get released in cgwb_bdi_destroy()
(called from bdi_unregister()). That is however unnecessary now when
cgwb->bdi is a proper refcounted reference (thus bdi cannot get
released before all cgwbs are released) and when cgwb_bdi_destroy()
shuts down writeback directly.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we waited for all cgwbs to get freed in cgwb_bdi_destroy()
which also means that writeback has been shutdown on them. Since this
wait is going away, directly shutdown writeback on cgwbs from
cgwb_bdi_destroy() to avoid live writeback structures after
bdi_unregister() has finished. To make that safe with concurrent
shutdown from cgwb_release_workfn(), we also have to make sure
wb_shutdown() returns only after the bdi_writeback structure is really
shutdown.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently root wb_writeback structure is added to bdi->wb_list in
bdi_init() and never removed. That is different from all other
wb_writeback structures which get added to the list when created and
removed from it before wb_shutdown().
So move list addition of root bdi_writeback to bdi_register() and list
removal of all wb_writeback structures to wb_shutdown(). That way a
wb_writeback structure is on bdi->wb_list if and only if it can handle
writeback and it will make it easier for us to handle shutdown of all
wb_writeback structures in bdi_unregister().
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Make wb->bdi a proper refcounted reference to bdi for all bdi_writeback
structures except for the one embedded inside struct backing_dev_info.
That will allow us to simplify bdi unregistration.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
congested->bdi pointer is used only to be able to remove congested
structure from bdi->cgwb_congested_tree on structure release. Moreover
the pointer can become NULL when we unregister the bdi. Rename the field
to __bdi and add a comment to make it more explicit this is internal
stuff of memcg writeback code and people should not use the field as
such use will be likely race prone.
We do not bother with converting congested->bdi to a proper refcounted
reference. It will be slightly ugly to special-case bdi->wb.congested to
avoid effectively a cyclic reference of bdi to itself and the reference
gets cleared from bdi_unregister() making it impossible to reference
a freed bdi.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Before commit 452b94b8c8 ("mm/swap: don't BUG_ON() due to
uninitialized swap slot cache"), the following bug is reported,
------------[ cut here ]------------
kernel BUG at mm/swap_slots.c:270!
invalid opcode: 0000 [#1] SMP
CPU: 5 PID: 1745 Comm: (sd-pam) Not tainted 4.11.0-rc1-00243-g24c534bb161b #1
Hardware name: System manufacturer System Product Name/Z170-K, BIOS 1803 05/06/2016
RIP: 0010:free_swap_slot+0xba/0xd0
Call Trace:
swap_free+0x36/0x40
do_swap_page+0x360/0x6d0
__handle_mm_fault+0x880/0x1080
handle_mm_fault+0xd0/0x240
__do_page_fault+0x232/0x4d0
do_page_fault+0x20/0x70
page_fault+0x22/0x30
---[ end trace aefc9ede53e0ab21 ]---
This is raised by the BUG_ON(!swap_slot_cache_initialized) in
free_swap_slot(). This is incorrect, because even if the swap slots
cache fails to be initialized, the swap should operate properly without
the swap slots cache. And the use_swap_slot_cache check later in the
function will protect the uninitialized swap slots cache case.
In commit 452b94b8c8, the BUG_ON() is replaced by WARN_ON_ONCE(). In
the patch, the WARN_ON_ONCE() is removed too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check. The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.
I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there. I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch provides all required callbacks required by the generic
get_user_pages_fast() code and switches x86 over - and removes
the platform specific implementation.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316213906.89528-1-kirill.shutemov@linux.intel.com
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparation patch for the transition of x86 to the generic GUP_fast()
implementation.
On x86, get_user_pages_fast() does a couple of sanity checks to see if we can
call __get_user_pages_fast() for the range.
This kind of wrapping protection should be useful for the generic code too.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-7-kirill.shutemov@linux.intel.com
[ Small readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparation patch for the transition of x86 to the generic GUP_fast()
implementation.
Prepare generic GUP_fast() to handle dev_pagemap(). At the moment, it's
only implemented on x86. On non-x86, the new code will be compiled out.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-6-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparation patch for the transition of x86 to the generic GUP_fast()
implementation.
Unlike generic GUP_fast(), the x86 version makes all pages it touches
referenced. It seems required for GRU and EPT.
See the following commit:
8ee53820ed ("thp: mmu_notifier_test_young")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-5-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparation patch for the transition of x86 to the generic GUP_fast()
implementation.
On x86 PAE, page table entry is larger than sizeof(long) and we would
need to provide a helper that can read the entry atomically.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-4-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a preparation patch for the transition of x86 to the generic GUP_fast()
implementation.
On x86, we would need to do additional permission checks to determine if
access is allowed.
Let's abstract it out into separate helpers.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The only arch that defines it to something meaningful is x86.
But x86 doesn't use the generic GUP_fast() implementation -- the
only place where the callback is called.
Let's drop it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K . V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dann Frazier <dann.frazier@canonical.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170316152655.37789-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch removes fixmap header usage on non-x86 code that was
introduced by the adaptable MODULE_END change.
Signed-off-by: Thomas Garnier <thgarnie@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170317175034.4701-1-thgarnie@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit bfc8c90139 ("mem-hotplug: implement get/put_online_mems")
introduced new functions get/put_online_mems() and mem_hotplug_begin/end()
in order to allow similar semantics for memory hotplug like for cpu
hotplug.
The corresponding functions for cpu hotplug are get/put_online_cpus()
and cpu_hotplug_begin/done() for cpu hotplug.
The commit however missed to introduce functions that would serialize
memory hotplug operations like they are done for cpu hotplug with
cpu_maps_update_begin/done().
This basically leaves mem_hotplug.active_writer unprotected and allows
concurrent writers to modify it, which may lead to problems as outlined
by commit f931ab479d ("mm: fix devm_memremap_pages crash, use
mem_hotplug_{begin, done}").
That commit was extended again with commit b5d24fda9c ("mm,
devm_memremap_pages: hold device_hotplug lock over mem_hotplug_{begin,
done}") which serializes memory hotplug operations for some call sites
by using the device_hotplug lock.
In addition with commit 3fc2192410 ("mm: validate device_hotplug is held
for memory hotplug") a sanity check was added to mem_hotplug_begin() to
verify that the device_hotplug lock is held.
This in turn triggers the following warning on s390:
WARNING: CPU: 6 PID: 1 at drivers/base/core.c:643 assert_held_device_hotplug+0x4a/0x58
Call Trace:
assert_held_device_hotplug+0x40/0x58)
mem_hotplug_begin+0x34/0xc8
add_memory_resource+0x7e/0x1f8
add_memory+0xda/0x130
add_memory_merged+0x15c/0x178
sclp_detect_standby_memory+0x2ae/0x2f8
do_one_initcall+0xa2/0x150
kernel_init_freeable+0x228/0x2d8
kernel_init+0x2a/0x140
kernel_thread_starter+0x6/0xc
One possible fix would be to add more lock_device_hotplug() and
unlock_device_hotplug() calls around each call site of
mem_hotplug_begin/end(). But that would give the device_hotplug lock
additional semantics it better should not have (serialize memory hotplug
operations).
Instead add a new memory_add_remove_lock which has the similar semantics
like cpu_add_remove_lock for cpu hotplug.
To keep things hopefully a bit easier the lock will be locked and unlocked
within the mem_hotplug_begin/end() functions.
Link: http://lkml.kernel.org/r/20170314125226.16779-2-heiko.carstens@de.ibm.com
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When vmalloc() fails it prints a very lengthy message with all the
details about memory consumption assuming that it happened due to OOM.
However, vmalloc() can also fail due to fatal signal pending. In such
case the message is quite confusing because it suggests that it is OOM
but the numbers suggest otherwise. The messages can also pollute
console considerably.
Don't warn when vmalloc() fails due to fatal signal pending.
Link: http://lkml.kernel.org/r/20170313114425.72724-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commmit 5a27aa8220 ("z3fold: add kref refcounting") introduced a bug
in z3fold_reclaim_page() with function exit that may leave pool->lock
spinlock held. Here comes the trivial fix.
Fixes: 5a27aa8220 ("z3fold: add kref refcounting")
Link: http://lkml.kernel.org/r/20170311222239.7b83d8e7ef1914e05497649f@gmail.com
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a PER_CPU struct which contains a spin_lock is statically initialized
via:
DEFINE_PER_CPU(struct foo, bla) = {
.lock = __SPIN_LOCK_UNLOCKED(bla.lock)
};
then lockdep assigns a seperate key to each lock because the logic for
assigning a key to statically initialized locks is to use the address as
the key. With per CPU locks the address is obvioulsy different on each CPU.
That's wrong, because all locks should have the same key.
To solve this the following modifications are required:
1) Extend the is_kernel/module_percpu_addr() functions to hand back the
canonical address of the per CPU address, i.e. the per CPU address
minus the per CPU offset.
2) Check the lock address with these functions and if the per CPU check
matches use the returned canonical address as the lock key, so all per
CPU locks have the same key.
3) Move the static_obj(key) check into look_up_lock_class() so this check
can be avoided for statically initialized per CPU locks. That's
required because the canonical address fails the static_obj(key) check
for obvious reasons.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ Merged Dan's fixups for !MODULES and !SMP into this patch. ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170227143736.pectaimkjkan5kow@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch aligns MODULES_END to the beginning of the fixmap section.
It optimizes the space available for both sections. The address is
pre-computed based on the number of pages required by the fixmap
section.
It will allow GDT remapping in the fixmap section. The current
MODULES_END static address does not provide enough space for the kernel
to support a large number of processors.
Signed-off-by: Thomas Garnier <thgarnie@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Luis R . Rodriguez <mcgrof@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rafael J . Wysocki <rjw@rjwysocki.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: kernel-hardening@lists.openwall.com
Cc: kvm@vger.kernel.org
Cc: lguest@lists.ozlabs.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-pm@vger.kernel.org
Cc: xen-devel@lists.xenproject.org
Cc: zijun_hu <zijun_hu@htc.com>
Link: http://lkml.kernel.org/r/20170314170508.100882-1-thgarnie@google.com
[ Small build fix. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull percpu fixes from Tejun Heo:
- the allocation path was updating pcpu_nr_empty_pop_pages without the
required locking which can lead to incorrect handling of empty chunks
(e.g. keeping too many around), which is buggy but shouldn't lead to
critical failures. Fixed by adding the locking
- a trivial patch to drop an unused param from pcpu_get_pages()
* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: remove unused chunk_alloc parameter from pcpu_get_pages()
percpu: acquire pcpu_lock when updating pcpu_nr_empty_pop_pages
gup_p4d_range() should call gup_pud_range(), not itself.
[ This was not noticed on x86: this is the HAVE_GENERIC_RCU_GUP code
used by arm[64] and powerpc - Linus ]
Fixes: c2febafc67 ("mm: convert generic code to 5-level paging")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reported-by: Anton Blanchard <anton@samba.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge 5-level page table prep from Kirill Shutemov:
"Here's relatively low-risk part of 5-level paging patchset. Merging it
now will make x86 5-level paging enabling in v4.12 easier.
The first patch is actually x86-specific: detect 5-level paging
support. It boils down to single define.
The rest of patchset converts Linux MMU abstraction from 4- to 5-level
paging.
Enabling of new abstraction in most cases requires adding single line
of code in arch-specific code. The rest is taken care by asm-generic/.
Changes to mm/ code are mostly mechanical: add support for new page
table level -- p4d_t -- where we deal with pud_t now.
v2:
- fix build on microblaze (Michal);
- comment for __ARCH_HAS_5LEVEL_HACK in kasan_populate_zero_shadow();
- acks from Michal"
* emailed patches from Kirill A Shutemov <kirill.shutemov@linux.intel.com>:
mm: introduce __p4d_alloc()
mm: convert generic code to 5-level paging
asm-generic: introduce <asm-generic/pgtable-nop4d.h>
arch, mm: convert all architectures to use 5level-fixup.h
asm-generic: introduce __ARCH_USE_5LEVEL_HACK
asm-generic: introduce 5level-fixup.h
x86/cpufeature: Add 5-level paging detection
Merge fixes from Andrew Morton:
"26 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
userfaultfd: remove wrong comment from userfaultfd_ctx_get()
fat: fix using uninitialized fields of fat_inode/fsinfo_inode
sh: cayman: IDE support fix
kasan: fix races in quarantine_remove_cache()
kasan: resched in quarantine_remove_cache()
mm: do not call mem_cgroup_free() from within mem_cgroup_alloc()
thp: fix another corner case of munlock() vs. THPs
rmap: fix NULL-pointer dereference on THP munlocking
mm/memblock.c: fix memblock_next_valid_pfn()
userfaultfd: selftest: vm: allow to build in vm/ directory
userfaultfd: non-cooperative: userfaultfd_remove revalidate vma in MADV_DONTNEED
userfaultfd: non-cooperative: fix fork fctx->new memleak
mm/cgroup: avoid panic when init with low memory
drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.h
mm/vmstats: add thp_split_pud event for clarity
include/linux/fs.h: fix unsigned enum warning with gcc-4.2
userfaultfd: non-cooperative: release all ctx in dup_userfaultfd_complete
userfaultfd: non-cooperative: robustness check
userfaultfd: non-cooperative: rollback userfaultfd_exit
x86, mm: unify exit paths in gup_pte_range()
...
quarantine_remove_cache() frees all pending objects that belong to the
cache, before we destroy the cache itself. However there are currently
two possibilities how it can fail to do so.
First, another thread can hold some of the objects from the cache in
temp list in quarantine_put(). quarantine_put() has a windows of
enabled interrupts, and on_each_cpu() in quarantine_remove_cache() can
finish right in that window. These objects will be later freed into the
destroyed cache.
Then, quarantine_reduce() has the same problem. It grabs a batch of
objects from the global quarantine, then unlocks quarantine_lock and
then frees the batch. quarantine_remove_cache() can finish while some
objects from the cache are still in the local to_free list in
quarantine_reduce().
Fix the race with quarantine_put() by disabling interrupts for the whole
duration of quarantine_put(). In combination with on_each_cpu() in
quarantine_remove_cache() it ensures that quarantine_remove_cache()
either sees the objects in the per-cpu list or in the global list.
Fix the race with quarantine_reduce() by protecting quarantine_reduce()
with srcu critical section and then doing synchronize_srcu() at the end
of quarantine_remove_cache().
I've done some assessment of how good synchronize_srcu() works in this
case. And on a 4 CPU VM I see that it blocks waiting for pending read
critical sections in about 2-3% of cases. Which looks good to me.
I suspect that these races are the root cause of some GPFs that I
episodically hit. Previously I did not have any explanation for them.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
IP: qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
PGD 6aeea067
PUD 60ed7067
PMD 0
Oops: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 13667 Comm: syz-executor2 Not tainted 4.10.0+ #60
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88005f948040 task.stack: ffff880069818000
RIP: 0010:qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155
RSP: 0018:ffff88006981f298 EFLAGS: 00010246
RAX: ffffea0000ffff00 RBX: 0000000000000000 RCX: ffffea0000ffff1f
RDX: 0000000000000000 RSI: ffff88003fffc3e0 RDI: 0000000000000000
RBP: ffff88006981f2c0 R08: ffff88002fed7bd8 R09: 00000001001f000d
R10: 00000000001f000d R11: ffff88006981f000 R12: ffff88003fffc3e0
R13: ffff88006981f2d0 R14: ffffffff81877fae R15: 0000000080000000
FS: 00007fb911a2d700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000c8 CR3: 0000000060ed6000 CR4: 00000000000006f0
Call Trace:
quarantine_reduce+0x10e/0x120 mm/kasan/quarantine.c:239
kasan_kmalloc+0xca/0xe0 mm/kasan/kasan.c:590
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544
slab_post_alloc_hook mm/slab.h:456 [inline]
slab_alloc_node mm/slub.c:2718 [inline]
kmem_cache_alloc_node+0x1d3/0x280 mm/slub.c:2754
__alloc_skb+0x10f/0x770 net/core/skbuff.c:219
alloc_skb include/linux/skbuff.h:932 [inline]
_sctp_make_chunk+0x3b/0x260 net/sctp/sm_make_chunk.c:1388
sctp_make_data net/sctp/sm_make_chunk.c:1420 [inline]
sctp_make_datafrag_empty+0x208/0x360 net/sctp/sm_make_chunk.c:746
sctp_datamsg_from_user+0x7e8/0x11d0 net/sctp/chunk.c:266
sctp_sendmsg+0x2611/0x3970 net/sctp/socket.c:1962
inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
SYSC_sendto+0x660/0x810 net/socket.c:1685
SyS_sendto+0x40/0x50 net/socket.c:1653
I am not sure about backporting. The bug is quite hard to trigger, I've
seen it few times during our massive continuous testing (however, it
could be cause of some other episodic stray crashes as it leads to
memory corruption...). If it is triggered, the consequences are very
bad -- almost definite bad memory corruption. The fix is non trivial
and has chances of introducing new bugs. I am also not sure how
actively people use KASAN on older releases.
[dvyukov@google.com: - sorted includes[
Link: http://lkml.kernel.org/r/20170309094028.51088-1-dvyukov@google.com
Link: http://lkml.kernel.org/r/20170308151532.5070-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We see reported stalls/lockups in quarantine_remove_cache() on machines
with large amounts of RAM. quarantine_remove_cache() needs to scan
whole quarantine in order to take out all objects belonging to the
cache. Quarantine is currently 1/32-th of RAM, e.g. on a machine with
256GB of memory that will be 8GB. Moreover quarantine scanning is a
walk over uncached linked list, which is slow.
Add cond_resched() after scanning of each non-empty batch of objects.
Batches are specifically kept of reasonable size for quarantine_put().
On a machine with 256GB of RAM we should have ~512 non-empty batches,
each with 16MB of objects.
Link: http://lkml.kernel.org/r/20170308154239.25440-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup_free() indirectly calls wb_domain_exit() which is not
prepared to deal with a struct wb_domain object that hasn't executed
wb_domain_init(). For instance, the following warning message is
printed by lockdep if alloc_percpu() fails in mem_cgroup_alloc():
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 1950 Comm: mkdir Not tainted 4.10.0+ #151
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x67/0x99
register_lock_class+0x36d/0x540
__lock_acquire+0x7f/0x1a30
lock_acquire+0xcc/0x200
del_timer_sync+0x3c/0xc0
wb_domain_exit+0x14/0x20
mem_cgroup_free+0x14/0x40
mem_cgroup_css_alloc+0x3f9/0x620
cgroup_apply_control_enable+0x190/0x390
cgroup_mkdir+0x290/0x3d0
kernfs_iop_mkdir+0x58/0x80
vfs_mkdir+0x10e/0x1a0
SyS_mkdirat+0xa8/0xd0
SyS_mkdir+0x14/0x20
entry_SYSCALL_64_fastpath+0x18/0xad
Add __mem_cgroup_free() which skips wb_domain_exit(). This is used by
both mem_cgroup_free() and mem_cgroup_alloc() clean up.
Fixes: 0b8f73e104 ("mm: memcontrol: clean up alloc, online, offline, free functions")
Link: http://lkml.kernel.org/r/20170306192122.24262-1-tahsin@google.com
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following test case triggers BUG() in munlock_vma_pages_range():
int main(int argc, char *argv[])
{
int fd;
system("mount -t tmpfs -o huge=always none /mnt");
fd = open("/mnt/test", O_CREAT | O_RDWR);
ftruncate(fd, 4UL << 20);
mmap(NULL, 4UL << 20, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_FIXED | MAP_LOCKED, fd, 0);
mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_LOCKED, fd, 0);
munlockall();
return 0;
}
The second mmap() create PTE-mapping of the first huge page in file. It
makes kernel munlock the page as we never keep PTE-mapped page mlocked.
On munlockall() when we handle vma created by the first mmap(),
munlock_vma_page() returns page_mask == 0, as the page is not mlocked
anymore. On next iteration follow_page_mask() return tail page, but
page_mask is HPAGE_NR_PAGES - 1. It makes us skip to the first tail
page of the next huge page and step on
VM_BUG_ON_PAGE(PageMlocked(page)).
The fix is not use the page_mask from follow_page_mask() at all. It has
no use for us.
Link: http://lkml.kernel.org/r/20170302150252.34120-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Obviously, we should not access memblock.memory.regions[right] if
'right' is outside of [0..memblock.memory.cnt>.
Fixes: b92df1de5d ("mm: page_alloc: skip over regions of invalid pfns where possible")
Link: http://lkml.kernel.org/r/20170303023745.9104-1-takahiro.akashi@linaro.org
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
userfaultfd_remove() has to be execute before zapping the pagetables or
UFFDIO_COPY could keep filling pages after zap_page_range returned,
which would result in non zero data after a MADV_DONTNEED.
However userfaultfd_remove() may have to release the mmap_sem. This was
handled correctly in MADV_REMOVE, but MADV_DONTNEED accessed a
potentially stale vma (the very vma passed to zap_page_range(vma, ...)).
The fix consists in revalidating the vma in case userfaultfd_remove()
had to release the mmap_sem.
This also optimizes away an unnecessary down_read/up_read in the
MADV_REMOVE case if UFFD_EVENT_FORK had to be delivered.
It all remains zero runtime cost in case CONFIG_USERFAULTFD=n as
userfaultfd_remove() will be defined as "true" at build time.
Link: http://lkml.kernel.org/r/20170302173738.18994-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The system may panic when initialisation is done when almost all the
memory is assigned to the huge pages using the kernel command line
parameter hugepage=xxxx. Panic may occur like this:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000302b88
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 [ 0.082424] NUMA
pSeries
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-15-generic #16-Ubuntu
task: c00000021ed01600 task.stack: c00000010d108000
NIP: c000000000302b88 LR: c000000000270e04 CTR: c00000000016cfd0
REGS: c00000010d10b2c0 TRAP: 0300 Not tainted (4.9.0-15-generic)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>[ 0.082770] CR: 28424422 XER: 00000000
CFAR: c0000000003d28b8 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1
GPR00: c000000000270e04 c00000010d10b540 c00000000141a300 c00000010fff6300
GPR04: 0000000000000000 00000000026012c0 c00000010d10b630 0000000487ab0000
GPR08: 000000010ee90000 c000000001454fd8 0000000000000000 0000000000000000
GPR12: 0000000000004400 c00000000fb80000 00000000026012c0 00000000026012c0
GPR16: 00000000026012c0 0000000000000000 0000000000000000 0000000000000002
GPR20: 000000000000000c 0000000000000000 0000000000000000 00000000024200c0
GPR24: c0000000016eef48 0000000000000000 c00000010fff7d00 00000000026012c0
GPR28: 0000000000000000 c00000010fff7d00 c00000010fff6300 c00000010d10b6d0
NIP mem_cgroup_soft_limit_reclaim+0xf8/0x4f0
LR do_try_to_free_pages+0x1b4/0x450
Call Trace:
do_try_to_free_pages+0x1b4/0x450
try_to_free_pages+0xf8/0x270
__alloc_pages_nodemask+0x7a8/0xff0
new_slab+0x104/0x8e0
___slab_alloc+0x620/0x700
__slab_alloc+0x34/0x60
kmem_cache_alloc_node_trace+0xdc/0x310
mem_cgroup_init+0x158/0x1c8
do_one_initcall+0x68/0x1d0
kernel_init_freeable+0x278/0x360
kernel_init+0x24/0x170
ret_from_kernel_thread+0x5c/0x74
Instruction dump:
eb81ffe0 eba1ffe8 ebc1fff0 ebe1fff8 4e800020 3d230001 e9499a42 3d220004
3929acd8 794a1f24 7d295214 eac90100 <e9360000> 2fa90000 419eff74 3b200000
---[ end trace 342f5208b00d01b6 ]---
This is a chicken and egg issue where the kernel try to get free memory
when allocating per node data in mem_cgroup_init(), but in that path
mem_cgroup_soft_limit_reclaim() is called which assumes that these data
are allocated.
As mem_cgroup_soft_limit_reclaim() is best effort, it should return when
these data are not yet allocated.
This patch also fixes potential null pointer access in
mem_cgroup_remove_from_trees() and mem_cgroup_update_tree().
Link: http://lkml.kernel.org/r/1487856999-16581-2-git-send-email-ldufour@linux.vnet.ibm.com
Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We added support for PUD-sized transparent hugepages, however we count
the event "thp split pud" into thp_split_pmd event.
To separate the event count of thp split pud from pmd, add a new event
named thp_split_pud.
Link: http://lkml.kernel.org/r/1488282380-5076-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"Sending this a bit sooner than I otherwise would have, as a fix in the
merge window had some unfortunate issues and side effects for some
folks.
This contains:
- Fixes from Jan for the bdi registration/unregistration. These have
been tested by the various parties reporting issues, and should be
solid at this point.
- Also from Jan, fix for axonram gendisk registration.
- A stable fix for zram from Johannes.
- A small series from Ming, fixing up some long standing issues with
blk-mq hardware queue kobject initialization and registration.
- A fix for sed opal from Jon, fixing a nonsensical range check and
some set-but-not-used variables.
- A fix from Neil for a long standing deadlock issue for stacking
device drivers. With this in place, dm/md don't have to work around
the issue anymore, and can be properly fixed up"
* 'for-linus' of git://git.kernel.dk/linux-block:
axonram: Fix gendisk handling
blk: improve order of bio handling in generic_make_request()
Revert "scsi, block: fix duplicate bdi name registration crashes"
block: Make del_gendisk() safer for disks without queues
bdi: Fix use-after-free in wb_congested_put()
block: Allow bdi re-registration
block/sed: Fix opal user range check and unused variables
zram: set physical queue limits to avoid array out of bounds accesses
blk-mq: free hctx->cpumask in release handler of hctx's kobject
blk-mq: make lifetime consistent between hctx and its kobject
blk-mq: make lifetime consitent between q/ctx and its kobject
blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
For full 5-level paging we need a helper to allocate p4d page table.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner