hardware driver for JR3/PCI force sensor board
From: Anders Blomdell <anders.blomdell@control.lth.se>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hardware driver for NI PCMCIA MIO E series cards
Supports DAQCard-AI-16XE-50 (ni_mio_cs), DAQCard-AI-16E-4,
DAQCard-6062E, DAQCard-6024E, DAQCard-6036E
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Hardware driver for NI AT-MIO E series cards
Supports the AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10,
AT-MIO-64E-3, AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 cards
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This supports National Instruments Lab-PC and compatibles
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For MeasurementComputing PCI-DAS series with the AMCC S5933 PCI
controller
From: Ivan Martinez <imr@oersted.dtu.dk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Advantech cards:
PCI-1710, PCI-1710HG, PCI-1711, PCI-1713, PCI-1720,
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For ADLink cards:
PCI-9118DG, PCI-9118HG, PCI-9118HR
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is used for any AMCC S5933 PCI controller code
From: Michal Dobes <dobes@tesnet.cz>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers are used to support National Instruments general purpose
counters and commands.
From: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: J.P. Mellor <jpmellor@rose-hulman.edu>
Cc: Herman Bruyninckx <Herman.Bruyninckx@mech.kuleuven.ac.be>
Cc: Wim Meeussen <Wim.Meeussen@mech.kuleuven.ac.be>
Cc: Klass Gadeyne <Klaas.Gadeyne@mech.kuleuven.ac.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Measurement Computing PCI Migration series boards
From: Richard Bytheway <mocelet@sucs.org>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for Amplicon PC36AT and PCI236 devices
From: Ian Abbott <abbotti@mev.co.uk>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is used by multiple comedi drivers.
It is the definitions for the PLX-9052 PCI interface chip
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
for Analog Devices RTI-800/815 devices
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For ADLink PCI-6208A devices
From: nsyeow <nsyeow@pd.jaring.my>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For Adlink NuDAQ ACL-7225b & compatibles
From: José Luis Sánchez <jsanchezv@teleline.es>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The classic in digital I/O.
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is needed by a bunch of different comedi drivers.
From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the addi-data family of comedi drivers to the staging tree
From: ADDI-DATA GmbH <info@addi-data.com>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the NULL test is necessary, then the dereference should be moved below
the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/).
// <smpl>
@disable is_null@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if (E == NULL) S
f(...,E->fld,...);
- if (E == NULL) S
@@
identifier f;
expression E;
identifier fld;
statement S;
@@
+ if (!E) S
f(...,E->fld,...);
- if (!E) S
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Error handling code following a kmalloc should free the allocated data.
The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@
(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
when != if (...) { <+...x...+> }
x->f = E
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
SPIN_LOCK_UNLOCKED is deprecated. The following makes the change suggested
in Documentation/spinlocks.txt
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
declarer name DEFINE_SPINLOCK;
identifier xxx_lock;
@@
- spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+ DEFINE_SPINLOCK(xxx_lock);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
0x20 has 0 as its rightmost bit and thus !inl(info->plx_regbase +
PLX_INTCSR) & 0x20 is always 0. I assume that !(!inl(info->plx_regbase +
PLX_INTCSR) & 0x20) was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E; constant C; @@
(
!E & !C
|
- !E & C
+ !(E & C)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
phison uses PCI interfaces, so it should depend on PCI.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
phison is an ATA driver, not a classic IDE driver, so fix the Kconfig file
so that it will build.
drivers/staging/phison/phison.c:43: error: implicit declaration of function 'ATA_BMDMA_SHT'
drivers/staging/phison/phison.c:43: error: initializer element is not constant
drivers/staging/phison/phison.c:43: error: (near initialization for 'phison_sht.module')
drivers/staging/phison/phison.c:47: error: 'ata_bmdma_port_ops' undeclared here (not in a function)
drivers/staging/phison/phison.c:65: error: implicit declaration of function 'ata_pci_sff_init_one'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This brings the driver up to modern times so that it can build and run
properly with the in-tree libata code.
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Minor touchups to fix up the coding style issues in the phison driver.
Cc: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It doesn't build properly yet as it is against an older kernel version.
That will be fixed up in patches following this.
From: Evan Ko <evan_ko@phison.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Basically, update driver to run with 2.6.28
- Conversion from struct class_device to struct device.
- Conversion from .nopfn to .fault in vm_operations_struct.
- Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
- Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.
Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Initial b3dfg driver development as preformed by Daniel Drake. All
basic functionality is completed.
Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Cc: Daniel Drake <ddrake@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert to use the dbg() macro we already have in the usb-serial layer.
This also turns off the default for the driver to spit out all of the
debug messages, now it is controlled by the module parameter.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Name it something sane, and fix up the code to be cleaner.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes them smaller, and fixes the name of the serial driver
structure.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the driver was copied from another one, there are lots of fields that
are unused due to the hardware being different. Remove a bunch of them,
more will be removed later.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Reorginize functions to get rid of forward prototypes so they are no
longer needed.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of unused and unneeded #defines in this code, so lets remove them.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver was copied from the io_edgeport.c driver, so we need to put
the proper copyright information back on it.
Also, almost all of the function comments are directly from the original
io_edgeport driver, and most of them are either totally wrong now due to
changes, or redundant. So delete them all so no one gets confused by
anything.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As we are wanting to be in the main kernel tree, remove the #ifdef
stuff for different kernel versions.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need for external .h files for a simple usb-serial driver, move them
into the .c file to make things easier to cleanup.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Many thanks to Russell Lang <gsview@ghostgum.com.au> for his
help in getting this working on newer kernel versions and
for pointing out this driver in the first place.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/stlc45xx printk format warnings:
drivers/staging/stlc45xx/stlc45xx.c:453: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:509: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:718: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:851: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:857: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/stlc45xx/stlc45xx.c:1508: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a new driver called stlc45xx, which supports wi-fi chipsets
stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for
example, from Nokia N800 and N810 products.
The driver is implemented based on the firmware interface information
published by ST-NXP Wireless here:
http://wireless.kernel.org/en/developers/Documentation/specs#STMicroelectronicshardware
Currently only SPI interface is supported.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/pohmelfs/path_entry.c: In function
'pohmelfs_construct_path_string':
drivers/staging/pohmelfs/path_entry.c:48: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:49: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:50: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c: In function 'pohmelfs_path_length':
drivers/staging/pohmelfs/path_entry.c:95: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:96: error: dereferencing pointer to incomplete type
drivers/staging/pohmelfs/path_entry.c:97: error: dereferencing pointer to incomplete type
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
pohmelfs wants to use CONNECTOR, so it selects CONNECTOR,
but when CONFIG_NET is not enabled, connector.c will not build,
since select does not follow the dependency chain.
Selecting NET is not a good idea, since that would build lots
of code that someone seemingly didn't want to build/store
and kconfig shouldn't do that behind someone's back.
pohmelfs should depend on NET since it uses network interfaces.
pohmelfs also uses CRYTPO and selects 2 cipher symbols, but
it should also select the top-level CRYPTO symbol since
kconfig dependency chains are not followed.
(found by inspection)
This allows the POHMELFS_CRYPTO option to depend only on
POHMELFS and makes the kconfig menu align properly.
Also fix minor typos & line lengths in kconfig help text.
Drop CONFIG_* in kconfig symbols in Kconfig file.
connector.c:(.text+0x46003): undefined reference to `kfree_skb'
connector.c:(.text+0x460a6): undefined reference to `kfree_skb'
connector.c:(.text+0x4612b): undefined reference to `kfree_skb'
(.text+0x4624f): undefined reference to `netlink_has_listeners'
(.text+0x4629b): undefined reference to `__alloc_skb'
(.text+0x462ea): undefined reference to `kfree_skb'
(.text+0x46308): undefined reference to `skb_put'
(.text+0x46385): undefined reference to `netlink_broadcast'
(.text+0x7b574): undefined reference to `sock_release'
(.text+0x7b8dd): undefined reference to `sock_create'
(.text+0x7b984): undefined reference to `kernel_connect'
(.text+0x7ba4c): undefined reference to `sock_release'
net.c:(.text+0x7bda4): undefined reference to `kernel_recvmsg'
(.text+0x7ef42): undefined reference to `kernel_sendmsg'
(.text+0x7f057): undefined reference to `kernel_sendpage'
(.text+0x7f1e8): undefined reference to `kernel_sendmsg'
connector.c:(.devinit.text+0x5b): undefined reference to `init_net'
connector.c:(.devinit.text+0x60): undefined reference to `netlink_kernel_create'
connector.c:(.devinit.text+0xc9): undefined reference to `netlink_kernel_release'
connector.c:(.devexit.text+0x2c): undefined reference to `netlink_kernel_release'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/pohmelfs/inode.c:917: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'
drivers/staging/pohmelfs/inode.c:1036: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t'
drivers/staging/pohmelfs/trans.c:164: warning: format '%u' expects type 'unsigned int', but argument 5 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:170: warning: format '%u' expects type 'unsigned int', but argument 7 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:517: warning: format '%u' expects type 'unsigned int', but argument 6 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:600: warning: format '%u' expects type 'unsigned int', but argument 6 has type '__kernel_size_t'
drivers/staging/pohmelfs/trans.c:610: warning: format '%u' expects type 'unsigned int', but argument 7 has type '__kernel_size_t'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Frank Seidel <frank@f-seidel.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
on Sparc64:
drivers/staging/pohmelfs/net.c:33: error: implicit declaration of function 'vmalloc'
drivers/staging/pohmelfs/net.c:42: error: implicit declaration of function 'vfree'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds Kconfig and Makefile entries and exports to
VFS functions to be used by POHMELFS.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements transaction processing helpers
used to allocate/free/insert/remove and other operations
with the transctions.
Each transction is an object, which may embed multiple commands
completed atomically. When server fails the whole transaction will be
replied against it (or different server) later. This approach allows to
maintain high data integrity and do not desynchronize filesystem state
in case of network or server failures.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a main network processing patch. It includes
both low-level socket machinery, zero-copy sending helpers,
receiving and parsing callbacks and mainly logical
commands handlers.
POHMELFS uses async network approach, when every command
can be separated from its answer and received after some
time after the request during which another lots of commands
can be injected into the network and replies to them received.
With read operation balancing between multiple hosts it is possible
that operations will arrive out of order and this is handled
by the transaction mechanism described partially here.
Having a transaction to guard the set of logically compound operations
allows to send data without thinking about its status and using
zero-copy sending mechanism, since transaction will receive explicit
acks from the servers when they are completed.
This patch also contains header with network srtuctures, commands
and short comments on how they are used.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
POHMELFS utilizes writeback cache, which is built on top of MO(E)SI-like
coherency protocol. This patch includes its implementation and cache
object processing helpers (like allocation and completion callbacks).
POHMELFS uses scalable cached read/write locking. No additional requests
are performed if lock is granted to the filesystem. The same protocol
is used by the server to on-demand flushing of the client's cache (for
example when server wants to update local data).
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the main patch which implements inode operations
(like reading and writing) and superblock processing
(filesystem registration, initial autoconfiguration
with the server like permissions, size of the exported
dir, amount of the objects created and so on).
POHMELFS relies on system's writeback cache mechanism
shown here, as long as cache coherency protocol described
later.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implementes all supported directory operations
like directory reading, object lookup, creation, removal
and so on.
Currently object removal is not optimized at all.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
POHMELFS is able to encrypt the whole network channel or
attach the strong checksum to own packets to catch faulty media.
This patch implements crypto initialization, its autoconfiguration
and sync with the server.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch includes POHMELFS configuration interface based
on the netlink kernel connector. This interface allows to create
configuration groups in the kerenel indexed by mount ID option.
Each configuration group can include multiple servers to work
with and various operation parameters.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On Mon, Jan 19, 2009 at 10:12:24AM -0800, Randy Dunlap (randy.dunlap@oracle.com) wrote:
>
> DST build fails when CONFIG_BLOCK=n:
DST should depend on block and block device, in the original patch its
kconfig entry was in the BLK_DEV menu, so this dependency was satisfied
automatically. Should attached patch be pushed into drivers/staging?
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Do not allow empty barriers or generic_make_request() -> scsi_setup_fs_cmnd()
will explode
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added thread pool exit condition into the thread_pool_del_worker(). If
called in parallel another thread can steal
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use bio prepend feature as suggested by Jens Axboe.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
bus_id is going away, use the dev_set_name() function instead.
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST may fully encrypt the data channel in case of untrusted channel and implement
strong checksum of the transferred data. It is possible to configure algorithms
and crypto keys, they should match on both sides of the network channel.
Crypto processing does not introduce noticeble performance overhead, since DST
uses configurable pool of threads to perform crypto processing.
This patch introduces crypto processing helpers and crypto engine initialization:
glueing with the crypto layer, allocation and initialization of the crypto
processing thread pool, allocation of the cached pages, which are used to temporary
encrypt data into, since it is forbidden to encrypt data in-place, since pages
are used by the higher layers.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST uses transaction model, when each store has to be explicitly acked
from the remote node to be considered as successfully written. There
may be lots of in-flight transactions. When remote host does not ack
the transaction it will be resent predefined number of times with specified
timeouts between them. All those parameters are configurable. Transactions
are marked as failed after all resends completed unsuccessfully, having
long enough resend timeout and/or large number of resends allows not to
return error to the higher (FS usually) layer in case of short network
problems or remote node outages. In case of network RAID setup this means
that storage will not degrade until transactions are marked as failed, and
thus will not force checksum recalculation and data rebuild. In case of
connection failure DST will try to reconnect to the remote node automatically.
DST sends ping commands at idle time to detect if remote node is alive.
Because of transactional model it is possible to use zero-copy sending
without worry of data corruption (which in turn could be detected by the
strong checksums though).
Transactions are handled in this patch: allocation/freeing/completion,
scanning for stall and to-be-resent transactions and overall management
of the storing tree.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kernel currently does not allow to queue work into some entity which
will perform it in the process context and have simple way to extend
number of worker and work with them not as separate objects, but with
pool as a whole. So thread pool model was implemented in the DST.
Thread pool abstraction allows to schedule a work to be performed
on behalf of kernel thread. One does not operate with threads itself,
instead user provides setup and cleanup callbacks for thread pool itself,
and action and cleanup callbacks for each submitted work.
Each worker has private data initialized at creation time and data,
provided by user at scheduling time.
When action is being performed, thread can not be used by other users,
instead they will sleep until there is free thread to pick their work.
Thread pool is used for crypto processing of incoming and outgoing IO
requests to reduce the overall overhead.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch introduces remote (export) node machinery: initialization
address/port (and other socket parameters), export block device (can be
another DST storage for example or local device like /dev/sda1), local
IO processing engine (BIO state machines, receiving/submitting logic).
Network management for the export node like accepting new client, scheduling
its command processing thread, receiving/sending IO requests, all are placed
here.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Each DST device contains of two nodes: local and remote (called also as export node).
This patch contains local node processing engine: network state storage,
socket processing loops and state machine, socket polling machinery, reconnection
logic, send/receive basic helpers, related IO commands and so on.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch contains DST core files, which introduce
block layer, connector and sysfs registration glue and main headers.
Connector is used for the configuration of the node (its type, address,
device name and so on). Sysfs provides bits of information about running
devices in the following format:
+/*
+ * DST sysfs tree for device called 'storage':
+ *
+ * /sys/bus/dst/devices/storage/
+ * /sys/bus/dst/devices/storage/type : 192.168.4.80:1025
+ * /sys/bus/dst/devices/storage/size : 800
+ * /sys/bus/dst/devices/storage/name : storage
+ */
DST header contains structure definitions and protocol command description.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replacing the use of kernel_thread() with kthread_run(). But as
kthread_run() returned a task structure, as compared with
kernel_thread() returning a PID, it was found to be more efficient to
store the task structure pointer as a field data instead of PID
pointer. On top of modifying the field to store task structure
pointer, the initialization of the field (assigned to
THREAD_PID_INIT_VALUE) was also found unnecessary - as no where it is
found to be used.
Signed-off-by: Peter Teoh <htmldeveloper@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed the CFLAG RT2860 from Makefile and dependency on it in the driver code.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed remaining four build warnings in drivers/staging/rt2860/:
drivers/staging/rt2860/common/mlme.c:900: warning: format ‘%d’ expects type ‘int’, but argument 2 has type ‘ULONG’
drivers/staging/rt2860/common/rtmp_init.c:2049: warning: ‘Value’ may be used uninitialized in this function
drivers/staging/rt2860/sta_ioctl.c:361: warning: ‘return’ with a value, in function returning void
drivers/staging/rt2860/sta_ioctl.c:2468: warning: ‘return’ with a value, in function returning void
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: rt2860: Ported v1.7.1.1 changes into v1.8.0.0, becoming v1.8.1.1
When RaLink released rt2860 v1.7.0.0, it lacked proper support for both WEP
and WPA/WPA2 encryption. Either was possible, but the module had to be
compiled to support only one or the other, never both.
Since the EeePC was the most common device with this hardware (and these
users were complaining to RaLink that WPA/WPA2 encryption didn't work)
RaLink released a fix as an "eeepc-specific" version of this driver, v1.7.1.1
Unfortunately, when v1.8.0.0 was released, this WPA/WPA2 fix was never
included.
What complicates things further is that RaLink has no interest in
continuing work on this Linux driver for their hardware.
This commit ports the changes introduced in v1.7.1.1 into the v1.8.0.0
release, upgrading the kernel's module to v1.8.1.1
Signed-off-by: Adam McDaniel <adam@array.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/rt28x0 printk format warnings:
linux-next-20090209/drivers/staging/rt2860/common/spectrum.c:1599: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
linux-next-20090209/drivers/staging/rt2860/rt_linux.c:857: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
linux-next-20090209/drivers/staging/rt2870/common/spectrum.c:1598: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
linux-next-20090209/drivers/staging/rt2870/rt_linux.c:898: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver is in mainline now so there's no point in keeping the
kernel version compatibility wrappers around.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IW_ENCODE_MODE is 0xF000 and thus !erq->flags & IW_ENCODE_MODE is always 0.
I assume that !(erq->flags & IW_ENCODE_MODE) was intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E; constant C; @@
(
!E & !C
|
- !E & C
+ !(E & C)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andrew pointed out that I forgot to convert some files to unix format
when adding them originally. This patch runs dos2unix on the rtl8187se
files that needed them.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/rtl8187se/r8180_wx.c:1386: warning: initialization from incompatible pointer type
drivers/staging/rtl8187se/r8180_wx.c:1388: warning: initialization from incompatible pointer type
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/rtl8187se printk format warnings:
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:845: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c:852: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix more android ram_console printk format warnings:
drivers/staging/android/ram_console.c:238: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
drivers/staging/android/ram_console.c:238: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix android printk format warnings:
linux-next-20090209/drivers/staging/android/ram_console.c:228: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
linux-next-20090209/drivers/staging/android/ram_console.c:228: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
linux-next-20090209/drivers/staging/android/ram_console.c:326: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'size_t'
linux-next-20090209/drivers/staging/android/ram_console.c:326: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in android binder:
drivers/staging/android/binder.c:2652: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t'
drivers/staging/android/binder.c:2659: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t'
drivers/staging/android/binder.c:2680: warning: format '%lx' expects type 'long unsigned int', but argument 7 has type 'pgprotval_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
See commit bedd30d9 (genirq: make irqreturn_t an enum)
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I run make on ioctl.c file and I got two warnings:
drivers/staging/otus/ioctl.c: In function ¡usbdrv_wpa_ioctl¢:
drivers/staging/otus/ioctl.c:2269: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/ioctl.c: In function ¡usbdrv_ioctl¢:
drivers/staging/otus/ioctl.c:2448: warning: ISO C90 forbids mixed declarations and code
From: Dragoslav Zaric <dragoslav.zaric.kd@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix otus ISO C90 warnings:
drivers/staging/otus/80211core/cmmsta.c:740: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/80211core/coid.c:219: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/80211core/coid.c:1437: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:33: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:53: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:82: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:163: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:219: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:831: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hprw.c:896: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:332: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1329: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1565: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1606: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1923: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:1997: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2264: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2296: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2330: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2350: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2387: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:2425: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4223: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4283: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4314: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4380: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4425: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4531: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpmain.c:4539: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpusb.c:69: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpusb.c:334: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpusb.c:580: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpreg.c:1774: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpreg.c:2478: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:61: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:80: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:145: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:352: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:393: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:472: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:517: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:592: warning: ISO C90 forbids mixed declarations and code
drivers/staging/otus/hal/hpani.c:633: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mimio driver uses input_* functions so it needs to depend on INPUT.
mimio.c:(.text+0x2526c9): undefined reference to `input_unregister_device'
mimio.c:(.text+0x2526da): undefined reference to `input_close_device'
mimio.c:(.text+0x252725): undefined reference to `input_free_device'
mimio.c:(.text+0x2528f1): undefined reference to `input_event'
mimio.c:(.text+0x252904): undefined reference to `input_event'
mimio.c:(.text+0x252921): undefined reference to `input_event'
mimio.c:(.text+0x252b3e): undefined reference to `input_event'
mimio.c:(.text+0x252b51): undefined reference to `input_event'
drivers/built-in.o:mimio.c:(.text+0x252bbd): more undefined references to `input_event' follow
mimio.c:(.text+0x252e42): undefined reference to `input_allocate_device'
mimio.c:(.text+0x2530ef): undefined reference to `input_register_device'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: mwilder@cs.nmsu.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warnings in altera pcie chdma:
drivers/staging/altpciechdma/altpciechdma.c:429: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
drivers/staging/altpciechdma/altpciechdma.c:433: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
drivers/staging/altpciechdma/altpciechdma.c:449: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
drivers/staging/altpciechdma/altpciechdma.c:450: warning: format '%08x' expects type 'unsigned int', but argument 3 has type 'dma_addr_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trivial cleanup, list_del(); list_add_tail() is equivalent
to list_move_tail(). Semantic patch for coccinelle can be
found at www.cccmz.de/~snakebyte/list_move_tail.spatch
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This set of patches introduces calls to the following set of functions:
usb_endpoint_dir_in(epd)
usb_endpoint_dir_out(epd)
usb_endpoint_is_bulk_in(epd)
usb_endpoint_is_bulk_out(epd)
usb_endpoint_is_int_in(epd)
usb_endpoint_is_int_out(epd)
usb_endpoint_num(epd)
usb_endpoint_type(epd)
usb_endpoint_xfer_bulk(epd)
usb_endpoint_xfer_control(epd)
usb_endpoint_xfer_int(epd)
usb_endpoint_xfer_isoc(epd)
In some cases, introducing one of these functions is not possible, and it
just replaces an explicit integer value by one of the following constants:
USB_ENDPOINT_XFER_BULK
USB_ENDPOINT_XFER_CONTROL
USB_ENDPOINT_XFER_INT
USB_ENDPOINT_XFER_ISOC
An extract of the semantic patch that makes these changes is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r1@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) ==
- \(USB_ENDPOINT_XFER_CONTROL\|0\))
+ usb_endpoint_xfer_control(epd)
@r5@ struct usb_endpoint_descriptor *epd; @@
- ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) ==
- \(USB_DIR_IN\|0x80\))
+ usb_endpoint_dir_in(epd)
@inc@
@@
#include <linux/usb.h>
@depends on !inc && (r1||r5)@
@@
+ #include <linux/usb.h>
#include <linux/usb/...>
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jason Andryuk noticed that at76_usb won't compile with current
wireless-testing tree. This is because net/ieee80211.h was missing.
net/ieee80211.h will be removed soon and at76_usb won't compile then that
happens. Preprare for that by using instead linux/ieee80211.h and copying
some structures not available.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
at76_usb has actually been already ported to use mac80211. Update the TODO
file to reflect this.
Signed-off-by: Kalle Valo <kalle.valo@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If dev is NULL it prints an error message. The error message dereferences
dev.
Compile tested only.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Leon Woestenberg <leon.woestenberg@axon.tv>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since unsigned, it won't get negative after subtraction.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
SPIN_LOCK_UNLOCKED is deprecated. The following makes the change suggested
in Documentation/spinlocks.txt
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
declarer name DEFINE_SPINLOCK;
identifier xxx_lock;
@@
- spinlock_t xxx_lock = SPIN_LOCK_UNLOCKED;
+ DEFINE_SPINLOCK(xxx_lock);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING and ME_IO_STREAM_CONFIG_WRAPAROUND both
hanve 0 as the rightmost bit, and thus eg
!flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING is always 0.
I assume that !(flags & ME_IO_SINGLE_TYPE_WRITE_NONBLOCKING) and
!(flags & ME_IO_STREAM_CONFIG_WRAPAROUND) were intended.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E; constant C; @@
(
!E & !C
|
- !E & C
+ !(E & C)
)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Error handling code following a kmalloc should free the allocated data.
The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@
(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
when != if (...) { <+...x...+> }
x->f = E
...>
(
return \(0\|<+...x...+>\|ptr\);
|
return@p2 ...;
)
@script:python@
p1 << r.p1;
p2 << r.p2;
@@
print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/). The result has been modified to
move the initialization of usb down closer to where it is used.
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the NULL test is necessary, then the dereference should be moved below
the NULL test.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@
- T i = E->fld;
+ T i;
... when != E
when != i
if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This eliminates checkpatch.pl warnings, that struct file_operations is
usually const. The structs me4000_ai_fops_array and
me4000_ao_fops_array are not modified and thus also made const.
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
checkpatch.pl triggered those as false positives for trailing
statements, but those lines also triggered some other warnings.
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fixes some checkpatch.pl errors complaining about wrong position of the
inline keyword
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fixes some checkpatch.pl errors about unneccessary parentheses.
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes the following checkpatch.pl warnings:
WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/io.h> instead of <asm/io.h>
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a mutex to block ioctls before the card is fully initialised and
only allow one ioctl at a time.
This stops udev trying to load the firmware before to card is fully up.
patch ported from wlan-ng-devel
Karl Relton <karllinuxtest.relton@ntlworld.com> spotted that this was
missing from the staging version,
http://lists.linux-wlan.com/pipermail/linux-wlan-devel/2009-February/003890.html
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace hfa384x2host_16(), hfa384x2host_32(), host2hfa384x_16()
and host2hfa384x_32() with standard byteorder macros.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace WLAN_LOG_INFO with printk() and remove it.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes the ieee2host16(), ieee2host32(), host2ieee16()
and host2ieee32() macros and replaces them with the generic ones.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the ugly DBFENTER/DBFEXIT macros, which are only inserted to add "<---" and
"--->" at the function start/end at higher debug levels and which make the code
a lot less readable.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move version identifier into p80211netdev.h and rename it to 0.3.0-staging
to differentiate from the out-of-tree version.
Also remove the unused wlan_ethconv declaration.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The header files contain a few comments, which describe the
function of the header element. Remove them where not needed.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace the driver local WLAN_ADDR_LEN constant through the kernel-wide ETH_ALEN definiton.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace all ocurrances of the __WLAN_ATTRIB_PACK__ from wlan_compat.h
by __attribute__((packed)) and remove it afterwards.
Signed-off-by: Moritz Muehlenhoff <jmm@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The gl_80211.h header file contains only two definitions that are actually
used. Move them to mds_s.h and remove the otherwise unused file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ds_tkip.h header file contains declarations of a function that is not
actually defined anywhere.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
The bssdscpt.h header file contains definitions that are not actually used for
anything.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As this typedef is used everywhere in the driver, remove it in a separate
patch.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes some typedefs from the driver code. I also removed some
unused structs I spotted while removing the typedefs.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The only remaining thing in common.h header file is the WBDEBUG() macro which
is unconditionally defined as printk(). Kill the macro and remove the header
file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The DebugUsbdStatusInformation macro doesn't do anything useful so remove the
definition and the two users of it from driver code.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As suggested by Harvey Harrison, convert driver to use ETH_ALEN and kill a
private macro from common.h that is used for the same thing.
Acked-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No need to keep function definitions separate from the rest so unify mto.h and
mto_f.h header files.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have no idea why the driver would want to include OpenGL headers in the first
place but lets just remove the crazy includes.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert code to include sysdef.h directly and remove unnecessary os_common.h
header file.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The header files are not included anywhere so we can just remove them.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some errors reported by checkpatch.pl
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fix the following error reported by checkpatch.pl
ERROR: trailing statements should be on next line
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fix the following error reported by checkpatch.pl
ERROR: do not initialise statics to 0 or NULL
Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Cc: Jakub Schmidtke <sjakub@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for downloading the firmware using kernel-builtin mechanism.
This will remove the need for the firmware files in the driver source code.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add a watchdog timer to take care of link change notifications.
Link changes would now be handled asynchronously as they involve large delays.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix a softlock warning message thrown up by the rtnl_timer.
This was observed during the LTP tests (interface up/down test)
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Read the correct MAC address from EEPROM/Flash.
Without this fix, all the interfaces were using the same MAC address.
This works on Rev B firmware.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the problem of the interface not working after a sequence of up-down-up
events. The problem was observed only on systems where the card was using MSI-X
interrupts. On the second time open, the driver did not request MSI-X vector
but was trying to use normal interrupts.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Update the module name in Kconfig help section.
This is a classic case of documentation keeping out of pace with
development
And this was overlooked by me ages ago when we had fixed the Makefile for
sxg_ethtool to compile.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* The receive rings were getting allocated twice. Once at probe time
and once at open time. This leaked huge amounts of memory.
Fix this leak and now allocation is done only once.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* This patch adds support for controling checksum feature using the ethtool
interface.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the deprecated microcode which was for Rev A.
Now on the driver will use Rev B microcode only.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch makes the Sahara SXG driver use Rev B firmware instead of Rev A.
The firmware version is 1.71
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the new firmware files required by Rev B cards.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix a memory leak if allocation of skb fails in sxg_fill_descriptor_block.
In sxg_fill_descriptor_block(), if allocation of skb failed in loop,
we just came out shouting. This rollbacks all the successful operation
before skb allocation fails and then returns.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* This patch adds support for offloading checksum to hardware.
IP checksum have been tested for IPv4 and IPv6.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix staging/sxg napi interface calls:
drivers/staging/sxg/sxg.c:1271: error: implicit declaration of function 'netif_rx_schedule_prep'
linux-next-20090209/drivers/staging/sxg/sxg.c:1272: error: implicit declaration of function '__netif_rx_schedule'
drivers/staging/sxg/sxg.c:1325: error: implicit declaration of function 'netif_rx_complete'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make Sahara SXG driver use MSI-X interrupts instead of line based interrupts
if possible. In case of problems in getting MSI-X vectors or MSI-X not being
supported, driver will fall back to use previous line based interrupts.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix the locking issue of locks in transmit code path.
There was an unnecessary check for interrupt context in transmit code path.
Removed that.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add NAPI support for SXG driver for Alacritech's 10Gbe products.
The driver will now work in NAPI mode by default.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add multicast support for SXG driver for Alacritech's 10Gbe products.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: Michael Miles <mmiles@alacritech.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This compiles out some functions that are not being used to keep the
build clean so that we can see the "real" warnings and errors.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These variables are never used, so #ifdef them away.
This should probably be fixed up properly from someone who knows why we
are even including these files in the first place, when they do not seem
to be needed at all.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They are not needed here and only cause build warnings and bloat the
object file.
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes some build problems with the ethtool support recently added
for the sxg driver.
This is a very good example of why you need to check the build for
warnings and then fix them...
Cc: Mithlesh Thukral <mithlesh@linsyssoft.com>
Cc: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix problem of crash on 50MB machine.
* Fixed dma_addr_t bug, which resolves issues on x86_32 bit machines.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add new firmware and remove all firmware file.
* Add a switch to load either debug or free firmware.
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Misc. cleanups in the driver.
* Remove debugging code and variables.
* Fix compile time warnings.
* Remove debugging comments.
* Start cleanup of sxg_stats structure. This structure will eventually become
very small
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix locking related issues like taking locks at right level.
* Convert some variables to atomic, to prevent taking them while
incrementing or decrementing them.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Cleanup in allocation of SXG_SGLs.
* Locking issues related to SglQLock.
* XmtCmd and XmtZeroLock consistency fixes.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Add Ethtool framework to driver
* Makefile changes to fix build redundancy.
* Fix ups to error code paths in receieve buffer allocation as well as receive code path.
* Read MAC address from FLASH/EEPROM
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Cleanup in recevive buffer structure
* Drop receive data buffer as its not needed with use of skbs
* Fix error code paths in receive skb failures
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix up the indentation to Linux style. There was some indentation which was
not as per Linux style specially related to 80 char lines.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up the comment. Converts the comments to C89 style.
Fixes comment related TODO item.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes all typedefs in the code. These were the typedefs
which are still present in driver in staging tree after the cleanup patches.
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* This patch introduces the new SXG_SGL design.
* Related changes to sxg_scatter_gather structure.
* Introduced PSXG_X64_SGL changes which are x64 friendly
* Setting the MAC HEADER pointer properly in skb before giving to higher
layers.
Signed-off-by: Michael Miles <mmiles@alacritech.com>
Signed-off-by: LinSysSoft Sahara Team <saharaproj@linsyssoft.com>
Signed-off-by: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Lots of spaces->tabs cleanups for slichw.h
It's much more sane and "Linux-like" now.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the ASSERT macro into slicoss.c as that's all that is currently
being used.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use the dev_err() call instead, it is the standard and provides much
more information.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was always enabled, so just always use it.
Cleaned up the ioctl code a bit as well to make it more readable.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not being used for anything, so delete it and all instances of it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's quite wierd, and doesn't even do anything on x86_64, so just delete
it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was always enabled, so just enable it and take out the one place it
was being used.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was always disabled, so just remove it and the 2 lines of
code it was protecting.
Also remove SLIC_POWER_MANAGEMENT which was also disabled, yet
was never used.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was always enabled, so just turn on the code that was being always
enabled, and remove the #define.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Putting static function prototypes in a .h file doesn't make much sense.
Move the ones that we need into the .c file and delete the rest.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
SLIC_GET_STATS_TIMER_ENABLED was never defined, so remove the code that
was bound by it.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As SLIC_DUMP_ENABLED was disabled, remove the code that it was keeping
from being built as it was not ever used. This removed a lot.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was just duplicating the same #defines already in the .c file
and it wasn't even being #included in any file.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are a number of "config" defines that do nothing, remove them.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not needed, so just call the function instead of using a define.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's not needed, so just call the function instead of using a define.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't use TRUE and FALSE, we have proper boolean types in the kernel.
Cc: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds the firmware to the firmware directory in ihex format so it can be
installed when doing make firmware_install.
Also update the firmware location in the driver code so it can locate
the files in the right place.
This should conclude the move to request_firmware().
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the static headers with the firmware code, they are no longer needed.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch uses request_firmware() to download the firmware to the card.
Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: (32 commits)
regulator: twl4030 VAUX3 supports 3.0V
regulator: Support disabling of unused regulators by machines
regulator: Don't increment use_count for boot_on regulators
twl4030-regulator: expose VPLL2
regulator: refcount fixes
regulator: Don't warn if we failed to get a regulator
regulator: Allow boot_on regulators to be disabled by clients
regulator: Implement list_voltage for WM835x LDOs and DCDCs
twl4030-regulator: list more VAUX4 voltages
regulator: Don't warn on omitted voltage constraints
regulator: Implement list_voltage() for WM8400 DCDCs and LDOs
MMC: regulator utilities
regulator: twl4030 voltage enumeration (v2)
regulator: twl4030 regulators
regulator: get_status() grows kerneldoc
regulator: enumerate voltages (v2)
regulator: Fix get_mode() for WM835x DCDCs
regulator: Allow regulators to set the initial operating mode
regulator: Suggest use of datasheet supply or pin names for consumers
regulator: email - update email address and regulator webpage.
...
* git://git.infradead.org/iommu-2.6:
intel-iommu: Fix address wrap on 32-bit kernel.
intel-iommu: Enable DMAR on 32-bit kernel.
intel-iommu: fix PCI device detach from virtual machine
intel-iommu: VT-d page table to support snooping control bit
iommu: Add domain_has_cap iommu_ops
intel-iommu: Snooping control support
Fixed trivial conflicts in arch/x86/Kconfig and drivers/pci/intel-iommu.c
David Schleef