Commit Graph

2670 Commits

Author SHA1 Message Date
Gustavo A. R. Silva 36d311bc16 iio: adc: rockchip_saradc: add NULL check on of_match_device() return value
Check return value from call to of_match_device()
in order to prevent a NULL pointer dereference.

In case of NULL print error message and return -ENODEV

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 19:09:50 +01:00
Gustavo A. R. Silva 2f9aeeed92 iio: adc: meson-saradc: add NULL check on of_match_device() return value
Check return value from call to of_match_device()
in order to prevent a NULL pointer dereference.

In case of NULL print error message and return -ENODEV

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 19:04:23 +01:00
Jack Andersen 7c0299e879 iio: adc: Add support for DLN2 ADC
This patch adds support for Diolan DLN2 ADC via IIO's ADC interface.
ADC is the fourth and final component of the DLN2 for the kernel.

Signed-off-by: Jack Andersen <jackoalan@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-09 18:17:18 +01:00
Stefan-Gabriel Mirea d466d3c121 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
In order to select the alternate voltage reference pair (VALTH/VALTL), the
right value for the REFSEL field in the ADCx_CFG register is "01", leading
to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1].

[1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf

Fixes: a775427632 ("iio:adc:imx: add Freescale Vybrid vf610 adc driver")
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-06 19:39:28 +01:00
Lorenzo Bianconi a7b8829d24 iio: accel: st_accel: add SPI-3wire support
Add SPI Serial Interface Mode (SIM) register information
in st_sensor_settings look up table to support devices
(like LSM303AGR accel sensor) that allow just SPI-3wire
communication mode. SIM mode has to be configured before any
other operation since it is not enabled by default and the driver
is not able to read without that configuration

Whilst a fairly substantial patch, the actual logic is simple and it
is better to have the generic fix than a band aid.

Fixes: ddc05fa286 (iio: st-accel: add support for lsm303agr accel)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-06 19:32:29 +01:00
Joe Perches eed3089fb2 iio: pressure: zpa2326: Add newlines to logging macros
Add newlines to the macro definitions and use a more common style.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-06 19:28:28 +01:00
Mike Looijmans 1d3eacbfa6 iio: Add LTC2471/LTC2473 driver
The LTC2741 and LTC2473 are single voltage ADC chips. The LTC2473
is similar to the LTC2471 but outputs a signed differential value.

Datasheet:
  http://cds.linear.com/docs/en/datasheet/24713fb.pdf

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-04 20:50:04 +01:00
Mikko Koivunen e12ffd241c iio: light: rpr0521 triggered buffer
Set up and use triggered buffer if there is irq defined for device in
device tree. Trigger producer triggers from rpr0521 drdy interrupt line.
Trigger consumer reads rpr0521 data to scan buffer.
Depends on previous commits of _scale and _offset.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-04 20:46:28 +01:00
Hans de Goede 631b010abc iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"
Inheriting the ADC BIAS current settings from the BIOS instead of
hardcoding then causes the AXP288 to disable charging (I think it
mis-detects an overheated battery) on at least one model tablet.

So lets go back to hard coding the values, this reverts
commit fa2849e964 ("iio: adc: axp288: Drop bogus
AXP288_ADC_TS_PIN_CTRL register modifications"), fixing charging not
working on the model tablet in question.

The exact cause is not fully understood, hence the revert to a known working
state.

Cc: stable@vger.kernel.org
Reported-by: Umberto Ixxo <sfumato1977@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-04 20:31:50 +01:00
Quentin Schulz be2ea53330 iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable
When initializing interrupts, the devm_request_any_context_irq will
enable them right away. An atomic flag was set in sun4i_irq_init and read
in the interrupt handler to make sure no unwanted interrupts were
handled. If an unwanted interrupt occurred, the handler would disable
the irq and return IRQ_HANDLED. However, at the end of sun4i_irq_init,
the irq would be disabled as well, resulting in an unbalanced enable
(since there are more disables than enables, the code enabling the
interrupt would never be called).

When reading the ADC or the temperature, the respective irq would be
enabled in the read function and disabled in the irq handler. In the
read function, we would wait for a completion (with a timeout) that will
be set in the irq handler. However, if the completion is never set or if
the wait for completion times out, the irq would not be disabled in the
read function resulting in an unbalanced enable once the read function
is called again (since there are 2+ enables for no disable).

Moving disable_irq from the irq handler to the read function get rid of
these two cases of unbalanced enable.

Fixes: d1caa99055 ("iio: adc: add support for Allwinner SoCs ADC")

Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-04 20:28:34 +01:00
Linus Torvalds 24d734a2ba hwmon updates for v4.13:
- Add PMBus client driver for IR35221
 - Add support for NCT6795D to nct6775 driver
 - Functional improvements to adt7475, aspeed-pwm-tacho, and ibmpowernv drivers
 - Minor fixes and cleanups in various drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZWYZwAAoJEMsfJm/On5mBCSYP/3GmiLKCS1aTupt31QUlHBw0
 yJfoL8RgwbQFR83y2fI679G1dgM1a0fyIBmFCNER5jPuxhbg5ZMb+BqT5SUDYXD8
 +isABxmOkWfszze5p6UlQHl5wBg+D+rV9IluxLniT74nKRtlKcIU3ePjii6vpAfK
 5rPxqTzwzVNHfDygiCK8DwflS5s8njOUJy1zLXroe4kUvu+NJnZb0nDdkD26zN75
 JHYNiqso2UQd2kD3kJgNzJ4t9OGcNWwPse4Y/z0P6YAMEbs8zNuS0MbVURsk17/9
 12w8eNOzsmj9m3MGKg9d6c75tG75ZRdsZzUxLEngO1LafKZ7o1YV9DBjIyhVTRxi
 nKofp0m/7xw/5R6XhyezL5EYohDFxjTNCT+h+GQoqvG4mZl4piG6ew4t6iG0AmJy
 91rXmUdYagXKU+DxNbBNM4MMwXkNHG6+jhufF9g1MTr9K7kLu9URU2gWA7Tm5/1u
 /0/Qt+XBr112T+luj8BHVYTiC7iaEhtBWFIFPNeay2+2Jt2nyYLcngiIuJLmwuCe
 vyK9i9j5P7jhxS23omzn5Ca8hdUmtOABR5cKOwpPur0yfGLjLAQG+vBW5mYu6yJt
 El8QftmRN/PWnEglG+nIJG35RL3XzCl6/CyI//C6tVHJViItUPQl/ZXpZUFXHsFY
 TeXRyHZGGcCQtBbsFUoZ
 =J5ye
 -----END PGP SIGNATURE-----

Merge tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add PMBus client driver for IR35221

 - Add support for NCT6795D to nct6775 driver

 - Functional improvements to adt7475, aspeed-pwm-tacho, and ibmpowernv
   drivers

 - Minor fixes and cleanups in various drivers

* tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (22 commits)
  hwmon: (aspeed-pwm-tacho) Poll with short sleeps.
  hwmon: (aspeed-pwm-tacho) reduce fan_tach period
  hwmon: (ibmpowernv) Add current(A) sensor
  hwmon: (ibmpowernv) introduce a legacy_compatibles array
  hwmon: (pwm-fan) Switch to new atomic PWM API
  hwmon: (scpi) Fix the scale of SCP sensor readings
  hwmon: (aspeed-pwm-tacho) Enable both edge measurement.
  hwmon: (ibmpowernv) Add highest/lowest attributes to sensors
  hwmon: (pmbus) move header file out of I2C realm
  hwmon: (max6639) move header file out of I2C realm
  hwmon: (ltc4245) move header file out of I2C realm
  hwmon: (ds620) move header file out of I2C realm
  hwmon: (ads1015) move header file out of I2C realm
  hwmon: (adt7475) temperature smoothing
  hwmon: (adt7475) add high frequency support
  hwmon: (adt7475) fan stall prevention
  hwmon: (adt7475) replace find_nearest() with find_closest()
  hwmon: (pmbus) Add client driver for IR35221
  hwmon: (nct6775) Add support for NCT6795D
  hwmon: (nct6775) Improve fan detection
  ...
2017-07-04 11:48:27 -07:00
Linus Torvalds f4dd029ee0 Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1.
 
 Lots of stuff in here, a large thunderbolt update, w1 driver header
 reorg, the new mux driver subsystem, google firmware driver updates, and
 a raft of other smaller things.  Full details in the shortlog.
 
 All of these have been in linux-next for a while with the only reported
 issue being a merge problem with this tree and the jc-docs tree in the
 w1 documentation area.  The fix should be obvious for what to do when it
 happens, if not, we can send a follow-up patch for it afterward.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO
 EMi60UXWqAFJbtVMS9Aj
 =yrSq
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the "big" char/misc driver patchset for 4.13-rc1.

  Lots of stuff in here, a large thunderbolt update, w1 driver header
  reorg, the new mux driver subsystem, google firmware driver updates,
  and a raft of other smaller things. Full details in the shortlog.

  All of these have been in linux-next for a while with the only
  reported issue being a merge problem with this tree and the jc-docs
  tree in the w1 documentation area"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
  misc: apds990x: Use sysfs_match_string() helper
  mei: drop unreachable code in mei_start
  mei: validate the message header only in first fragment.
  DocBook: w1: Update W1 file locations and names in DocBook
  mux: adg792a: always require I2C support
  nvmem: rockchip-efuse: add support for rk322x-efuse
  nvmem: core: add locking to nvmem_find_cell
  nvmem: core: Call put_device() in nvmem_unregister()
  nvmem: core: fix leaks on registration errors
  nvmem: correct Broadcom OTP controller driver writes
  w1: Add subsystem kernel public interface
  drivers/fsi: Add module license to core driver
  drivers/fsi: Use asynchronous slave mode
  drivers/fsi: Add hub master support
  drivers/fsi: Add SCOM FSI client device driver
  drivers/fsi/gpio: Add tracepoints for GPIO master
  drivers/fsi: Add GPIO based FSI master
  drivers/fsi: Document FSI master sysfs files in ABI
  drivers/fsi: Add error handling for slave
  drivers/fsi: Add tracepoints for low-level operations
  ...
2017-07-03 20:55:59 -07:00
Reno Farnesi aab498ba12 iio: adis16400: Change unsigned to unsigned int
This patch fixes the following checkpatch warnings:

Prefer 'unsigned int' to bare use of 'unsigned

Signed-off-by: Reno Farnesi <nfarnesi4@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:27:03 +01:00
Lorenzo Bianconi 2ff59bf39b iio: pressure: st_pressure_spi: add OF capability to st_pressure_spi
Add device tree support for LPS22HB, LPS25H, LPS331AP, LPS001WP
pressure sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:58 +01:00
Lorenzo Bianconi 794694ce23 iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi
Add device tree support for L3G4200D, LSM330D, LSM330DL, LSM330DLC,
L3GD20, L3GD20H, L3G4IS, LSM330, LSM9DS0 gyroscope sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:56 +01:00
Lorenzo Bianconi 65a687a22d iio: magnetometer: st_magn_spi: add OF capability to st_magn_spi
Add device tree support for LIS3MDL and LSM303AGR magnetometer sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:55 +01:00
Lorenzo Bianconi ff73e8611e iio: accel: st_accel_spi: add OF capability to st_accel_spi
Add device tree support for LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM330, LSM303AGR, LIS2DH12, LIS3L02DQ, LNG2DM accel sensors.
Fix LIS302DL support defining of_device_id data field in st_accel_of_match
table

Fixes: 762227721f (iio: accel: st_accel: handle deprecated bindings)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:55 +01:00
Matthias Kaehlcke 2aac3388f1 iio: magnetometer: Only declare ACPI table when ACPI is enable
Don't inflate the kernel size with data that isn't used. The conditional
declaration also fixes the following warning when building with clang:

drivers/iio/magnetometer/ak8975.c:704:36: error: variable 'ak_acpi_match'
  is not needed and will not be emitted
  [-Werror,-Wunneeded-internal-declaration]

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:54 +01:00
Reno Farnesi 893bd0ebfa iio: sca3000: Remove trailing whitespace
Removes trailing whitespace to fix checkpatch errors

Signed-off-by: Reno Farnesi <nfarnesi4@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:54 +01:00
Gaurav Gupta b995a732da iio:adc:ltc2497: Add support for board file based iio consumer mapping.
Add missing hooks in the LTC2497 IIO driver to allow hwmon mapping.

Signed-off-by: Gaurav Gupta <gauragup@cisco.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:53 +01:00
Colin Ian King 004123f3df iio: adc: stm32: make array stm32h7_adc_ckmodes_spec static
The array stm32h7_adc_ckmodes_spec does not need to be in global scope, so
make it static.

Cleans up sparse warning:
"symbol 'stm32h7_adc_ckmodes_spec' was not declared. Should it be static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:52 +01:00
Angelo Compagnucci 6be72b9067 iio: adc: mcp3422: Checking for error on probe
Some part of the configuration are not touched after the probe
and if something goes wrong on writing the initial one,
the chip will misbehave.
Adding an error checking ensures that the inital configuration will
be written correctly. Moreover ensures that a sensible configuration
will be saved in driver data and used subsequently as intended.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reported-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:52 +01:00
Angelo Compagnucci e3169994f6 iio: adc: mcp3422: Changing initial channel
Initial channel should be the first available channel on
all configurations, so changing to channel 0 available on
all supported chips.

Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reported-by: Maarten Brock <m.brock@vanmierlo.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:51 +01:00
Linus Walleij b64a097af4 iio: gyro: mpu3050: Allow open drain with anything
Open drain should work fine with rising or high level IRQs,
this code was due to some misunderstanding on my part.

Reported-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-02 10:24:51 +01:00
Akinobu Mita ea5c6e262c iio: light: tcs3472: add link to datasheet
Add a link to the TCS3472 datasheet in the AMS's website.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:23:06 +01:00
Zhiyong Tao 65746eb742 iio: adc: mt7622: Add compatible node for mt7622.
This commit adds mt7622 compatible node.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:20:28 +01:00
Zhiyong Tao 5236bbc6cd iio: adc: mt7622: add support for suspend/resume.
This patch supports auxadc suspend/resume flow.
Disable auxadc clk and power in suspend function.
Enable axuadc clk and power in resume function.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:20:08 +01:00
Lorenzo Bianconi ff5fff4af4 iio: imu: st_lsm6dsx: support open drain mode
Add open drain support in order to share requested IRQ line between
st_lsm6dsx device and other peripherals

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:17:00 +01:00
Manivannan Sadhasivam 1813c71317 iio: pressure: ms5637: Add OF match table
Add of_match_table for Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:59 +01:00
Manivannan Sadhasivam c43aaa2772 iio: humidity: htu21: Add OF match table
Add of_match_table for Measurement-Specialties htu21 temperature & humidity sensor and humidity part of MS8607 sensor

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:59 +01:00
Eugen Hristev 500a2eefd6 iio: adc: at91-sama5d2_adc: add support for suspend/resume functionality
Added support for suspend/resume functionality for the ADC IP
in sama5d2 SoC.
In order to enter Suspend to ram mode (backup + self refresh mode for
memory), in which the ADC IP is no longer powered, we need to reset the
pins to default state, for the scenario when they are also used for I2C
bus to communicate with the PMIC.
On resume, we need to reconfigure the ADC IP registers and reconfigure the
trigger registers in the case when the suspend procedure is done while
sysfs has the buffer and trigger enabled.
In the case the suspend happens exactly during a software triggered
conversion, the request will time out, because we reset and power down
the ADC.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:58 +01:00
Lorenzo Bianconi c24f83bad9 iio: accel: st_accel_spi: rename of_device_id table in st_accel_of_match
In order to add proper device tree support give a more general name
to of_device_id table

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:58 +01:00
Lorenzo Bianconi 250bbbdbed iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code
Move st_sensors_of_i2c_probe() in st_sensors_core and rename it in
st_sensors_of_name_probe(). That change is necessary to add device-tree
support in spi code otherwise the rest of the autodetection will fail
since spi->modalias (and indio_dev->name) will be set using compatible
string value that differs from standard sensor name

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:56 +01:00
Lorenzo Bianconi 1371856416 iio: magnetometer: st_magn_core: enable multiread by default for LIS3MDL
Enable multiread by default for LIS3MDL since using I2C interface
the subaddr Msb is used to automatically increase the slave address
during multiple data read/write. In the same way, using SPI interface,
bit 1 in register address is used to enable auto-increment of the slave
address in multiple read/write.

Fixes: 872e79add7 (iio:magn: Add STMicroelectronics magn driver)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:52 +01:00
Akinobu Mita 53d7d8139f iio: light: tcs3472: fix ATIME register write
The integration time is controlled by the ATIME register only.  However,
this register is written by i2c_smbus_write_word_data() in write_raw().

We actually don't need to write a subsequent register.  So just use
i2c_smbus_write_byte_data() instead.

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:49 +01:00
Stefan Brüns e5c2ce6bac iio: adc: Fix polling of INA219 conversion ready flag
While the INA226 has a conversion ready flag (CVRF) in the R/W Mask/Enable
register with read-to-clear semantics, the corresponding bit of the INA219
(CNVR) is part of the bus voltage register. The flag is cleared by reading
the power register.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:47 +01:00
Manivannan Sadhasivam 55eaac2b99 iio: temperature: tsys01: Add OF match table
Add of_match_table for Measurement Specialties TSYS01 temperature sensor

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:42 +01:00
Eugen Hristev 5e1a1da0f8 iio: adc: at91-sama5d2_adc: add hw trigger and buffer support
Added support for the external hardware trigger on pin ADTRG,
integrated the three possible edges into the driver
and created buffer management for data retrieval

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:39 +01:00
Fabio Estevam edd80a5f51 iio: adc: Kconfig: Append vendor name for IMX7D_ADC
To keep IMX7D_ADC text consistent with other iio/adc entries, add
the vendor name to the driver menu text.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:38 +01:00
Michael Stecklein a2d80de873 iio: humidity: hdc100x: add match table and device id's
Add of_match_table and point it to a list of compatible device tree
device id's.

Signed-off-by: Michael Stecklein <m-stecklein@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:38 +01:00
Michael Stecklein 8f4c9575a8 iio: humidity: hdc100x: document compatible HDC10xx devices
Include datasheet links, add i2c_device_id entries, and update
kconfig help for compatible HDC10xx devices: HDC1000, HDC1008,
HDC1010, HDC1050, and HDC1080.

Signed-off-by: Michael Stecklein <m-stecklein@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:38 +01:00
Lorenzo Bianconi 45a4e4220b iio: gyro: st_gyro: fix L3GD20H support
Add proper support for L3GD20H gyroscope sensor. In particular:
- use L3GD20H as device name instead of L3GD20
- fix available full scales
- fix available sample frequencies

Note that the original patch listed first below introduced broken support for
this part.  The second patch drops the support as it didn't work.

This new patch brings in working support.

Fixes: 9444a300c2 (IIO: Add support for L3GD20H gyroscope)
Fixes: a065771641 ("iio:gyro: bug on L3GD20H gyroscope support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:37 +01:00
Hans de Goede 1911f48de0 iio: accel: bmc150: Add support for BOSC0200 ACPI device id
Add support for the BOSC0200 ACPI device id used on some x86 tablets.
note driver_data is not set to a specific model, driver_data is not
used anyways (instead detection is done on the chip_id reg) and the
2 tablets with a BOSC0200 ACPI device id I've have 2 different chips,
one has a BMA250E, the other a BMA222E.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-07-01 10:16:37 +01:00
Greg Kroah-Hartman dd36a2d9ad Second set of IIO new device support, features and cleanups for the 4.13 cycle.
A few reverts here. One was a general failure to notice a device was already
 supported by another driver.  The second is due to a review comment pointing
 out that the original patch was a bad idea and would break existing systems.
 
 Reverts
 * bma180
   - Revert addition of support for the BMA250E it is already supported by
     the bmc150-accel and better supported at that. Oops.
 * hi8435
   - The fix for cleanup of the reset gpio stuff isn't a good way to go.  It
     breaks systems where an inverting level convertor is used.  The right fix
     is to make the original devicetree correct - even if it involves patching
     the devicetree in kernel.
 
 New Device Support
 * stm32-adc
   - STM32H7 support and bindings.
 
 Features
 * core
   - add a hardware triggered operating mode for systems in which the actual
     trigger is never seen by the kernel.  This is typically only used when
     a device 'can' use other triggers, but if a particular magic one is
     enabled the interrupt is effectively handled in hardware and we never see
     it.
 * st-lsm6dsx
   - support active low interrupts.
 * stm32-adc
   - Make the core adc clock optional as not all hardware supported requires it.
   - Make the bus clock optional in the per instance driver as it may be shared
     by all instances of the ADC and is handled by the core.
   - Rework to have a data structure representing the device type specific
     elements.
 * stm32-trigger (and counter)
   - Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
   - Add an attribute to configure device modes for quadrature counting etc.
 
 Clean ups and minor fixes
 * IIO core.
   - use __sysfs_match_string() helper rather than open coding the same.
 * ad7791
   - use sysfs_match_string() helper rather than open coding the same.
 * aspeed-adc
   - handle return value of clk_prepare_enable
 * cpcap
   - Fix default register values and ensure the battery thermistor is enabled
     correctly.
   - Fix the reported die temperature where we can - docs are lacking.
   - Remove the hung interrupt quirk as no longer happens due to fix in the
     mfd driver.
 * hi8435
   - Remove &s from hi8435_info definition as unneeded and inconsistent.
 * hid-sensor-trgger
   - Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
 * ina2xx
   - Make the use of iio_info_mask* elements consistent for all channels.
     This doesn't have any visible effect, but acts as clear documentation of
     which channels various resulting attributes apply to.
 * lpc32xx
   - handle the return value of clk_prepare_enable.
 * meson-saradc
   - NULL instead of 0 for pointer.
 * mma9551
   - use NULL for GPIO connection ID to aid implementation fo ACPI support.
     Here the connection ID doesn't actually tell us anything and it is much
     easier to deal with the driver if it's not there.
 * mpu6050
   - Fix lock issues through use of a local mux.
   - Replace sprintf with scnprintf as appropriate.
   - Check whoami against all known values.  This allows for a small number of
     boards where we are really fishing for the part not being present at all.
     It is unfortunately common to have undescribed changes to use newer chips.
     We paper over this but just emitting a warning for those cases as long as
     we know about.
 * mxs-lradc
   - Fix some non static warnings.
 * rcar-adc
   - Part of making the naming for this part consistent across the kernel.
 * st_accel
   - drop some spi_device_id entries for variants with no SPI support
 * st_magn
   - drop some spi_device_id entries for variants with no SPI support.
 * sx9500
   - Use devm_gpiod_get instead of indexed value with an index of 0 on all
     occasions.
 * twl4030
   - Drop unused twl4030_get_madc_conversion as callers removed now throughout
     kernel.
   - Unexport twl4030_madc_conversion() as no used only within this driver.
   - Drop twl4030_madc_user_params as not used now.
   - Drop twl4030_madc_request.func_cb as not used now.
   - Fold the twl4030-madc.h header into the driver as no longer used anywhere
     else in the kernel.
 * xilinx
   - Handle the return value of clk_prepare_enable
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAllJSCURHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogTTQ//bbAzHKB0qTwusFN5jrz1JqjGj3+bMXH/
 KumP4nj7NzwKBe4tDe40FsdkZ4c+Um8pK2Aj7iJZojwTcCi02VVjbM++Gj0akMTZ
 MIlrEkTvqVsmVFG085hloSiFU2xXfTnfQmp19M9QtyDnHkgBMo9sOFnBK3EG+Se4
 NIliUvq8PJzCjTRVafSeSFNoDMwXXQTIKhfq8TDSeOG9o5mCTgAdy8yGiZ2ag/Ok
 peFfwauGs9Gg6tRour7UxccawuLnuzPNzwzUUSG3gkdIUTQVD6YHAzXzwblnB5P6
 0ZcErJpGSLAYcHQH310ZRTizhhW+vi+ftWUkps81xqpmFp3+EydVnJS0MZXYgM2o
 Cv6wbohp9w22I5/B9TMEfL7vnj1i4iZoJfi00Su1HBDHBiNpXISRc/fnkRMWavhr
 gvypyxngQmXm1JN/R8UMbJQsSpH3TN07AYF1qx0Tktfyx4S18rdW4hwt+kBNe9ni
 5G9xQU8IhmN8yvHMsTvZHbAmbuOR6iaghx3arf65qdHPvKSQ/nTSlran9U1JPvyJ
 tWVKtPaY5zEGgkQBmWee+qWkWOBGYDC4nmTwijB0u61Deq+5hGg55cZPd0fSXLMg
 6ecNg2v7zrdYldulOpfdNUEOrXa/NYBEAuYUNvccp8DArOqdazkCyO3DlDFDUXRw
 RKNE7Btx/rU=
 =2fJI
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new device support, features and cleanups for the 4.13 cycle.

A few reverts here. One was a general failure to notice a device was already
supported by another driver.  The second is due to a review comment pointing
out that the original patch was a bad idea and would break existing systems.

Reverts
* bma180
  - Revert addition of support for the BMA250E it is already supported by
    the bmc150-accel and better supported at that. Oops.
* hi8435
  - The fix for cleanup of the reset gpio stuff isn't a good way to go.  It
    breaks systems where an inverting level convertor is used.  The right fix
    is to make the original devicetree correct - even if it involves patching
    the devicetree in kernel.

New Device Support
* stm32-adc
  - STM32H7 support and bindings.

Features
* core
  - add a hardware triggered operating mode for systems in which the actual
    trigger is never seen by the kernel.  This is typically only used when
    a device 'can' use other triggers, but if a particular magic one is
    enabled the interrupt is effectively handled in hardware and we never see
    it.
* st-lsm6dsx
  - support active low interrupts.
* stm32-adc
  - Make the core adc clock optional as not all hardware supported requires it.
  - Make the bus clock optional in the per instance driver as it may be shared
    by all instances of the ADC and is handled by the core.
  - Rework to have a data structure representing the device type specific
    elements.
* stm32-trigger (and counter)
  - Use the INDIO_HARDWARE_TRIGGERED_MODE where appropriate.
  - Add an attribute to configure device modes for quadrature counting etc.

Clean ups and minor fixes
* IIO core.
  - use __sysfs_match_string() helper rather than open coding the same.
* ad7791
  - use sysfs_match_string() helper rather than open coding the same.
* aspeed-adc
  - handle return value of clk_prepare_enable
* cpcap
  - Fix default register values and ensure the battery thermistor is enabled
    correctly.
  - Fix the reported die temperature where we can - docs are lacking.
  - Remove the hung interrupt quirk as no longer happens due to fix in the
    mfd driver.
* hi8435
  - Remove &s from hi8435_info definition as unneeded and inconsistent.
* hid-sensor-trgger
  - Add kconfig depends on IIO_BUFFER (fixes patch in previous series)
* ina2xx
  - Make the use of iio_info_mask* elements consistent for all channels.
    This doesn't have any visible effect, but acts as clear documentation of
    which channels various resulting attributes apply to.
* lpc32xx
  - handle the return value of clk_prepare_enable.
* meson-saradc
  - NULL instead of 0 for pointer.
* mma9551
  - use NULL for GPIO connection ID to aid implementation fo ACPI support.
    Here the connection ID doesn't actually tell us anything and it is much
    easier to deal with the driver if it's not there.
* mpu6050
  - Fix lock issues through use of a local mux.
  - Replace sprintf with scnprintf as appropriate.
  - Check whoami against all known values.  This allows for a small number of
    boards where we are really fishing for the part not being present at all.
    It is unfortunately common to have undescribed changes to use newer chips.
    We paper over this but just emitting a warning for those cases as long as
    we know about.
* mxs-lradc
  - Fix some non static warnings.
* rcar-adc
  - Part of making the naming for this part consistent across the kernel.
* st_accel
  - drop some spi_device_id entries for variants with no SPI support
* st_magn
  - drop some spi_device_id entries for variants with no SPI support.
* sx9500
  - Use devm_gpiod_get instead of indexed value with an index of 0 on all
    occasions.
* twl4030
  - Drop unused twl4030_get_madc_conversion as callers removed now throughout
    kernel.
  - Unexport twl4030_madc_conversion() as no used only within this driver.
  - Drop twl4030_madc_user_params as not used now.
  - Drop twl4030_madc_request.func_cb as not used now.
  - Fold the twl4030-madc.h header into the driver as no longer used anywhere
    else in the kernel.
* xilinx
  - Handle the return value of clk_prepare_enable
2017-06-26 07:09:23 +02:00
Lorenzo Bianconi add6e6ab3e iio: pressure: st_pressure_core: disable multiread by default for LPS22HB
Set multiread variable to false for LPS22HB pressure sensor since
it is already enabled in CTRL_REG2. Previous configuration does not
cause any issue in I2C communication since SUB Msb has no meaning
whereas it breaks register address in SPI communication

Fixes: e039e2f5b4 (iio:st_pressure:initial lps22hb sensor support)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-24 20:46:25 +01:00
Akinobu Mita a3507e48d3 iio: light: tsl2563: use correct event code
The TSL2563 driver provides three iio channels, two of which are raw ADC
channels (channel 0 and channel 1) in the device and the remaining one
is calculated by the two.  The ADC channel 0 only supports programmable
interrupt with threshold settings and this driver supports the event but
the generated event code does not contain the corresponding iio channel
type.

This is going to change userspace ABI.  Hopefully fixing this to be
what it should always have been won't break any userspace code.

Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-24 20:42:49 +01:00
Greg Kroah-Hartman d06838de4a Merge 4.12-rc6 into staging-next
We want the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-20 10:17:45 +08:00
Jean-Baptiste Maneyrol 881b556f6c iio: imu: inv_mpu6050: test whoami first and against all known values
SPI bus is never generating error during transfer, so to check if
a chip is correctly connected on a SPI bus we enforce whoami check
to be correct. In this way we can assure SPI probe is failing if
there is no chip connected.

Note that this is really papering over boards that claim the device
is there when it isn't.  Not a bad thing to cope with, but not
necessarily stable material.

Fixes: cec0154556 ("iio: inv_mpu6050: Check WHO_AM_I register on probe")
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-13 21:18:17 +01:00
Alexander Wuerstlein 0483fff4d0 iio hid-sensor-trigger: add Kconfig depends on IIO_BUFFER
Building a kernel with my configuration failed with:
> drivers/built-in.o: In function `hid_sensor_setup_batch_mode': staging/drivers/iio/common/hid-sensors/hid-sensor-trigger.c:104: undefined reference to `iio_buffer_set_attrs'
which is fixed by this patch.

Signed-off-by: Alexander Wuerstlein <arw@arw.name>
Fixes: 138bc7969c ("iio: hid-sensor-hub: Implement batch mode")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-13 21:10:14 +01:00
Phil Reid 7981dc07fe iio: buffer-dmaengine: Add missing header buffer_impl.h
Add buffer_impl.h as buffer.h was split into interface for using and
for internals. Without this industrialio-buffer-dmaengine.c fails
to compile.

Fixes:
commit 33dd94cb97 ("iio:buffer.h - split
into buffer.h and buffer_impl.h")

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-13 20:56:05 +01:00
Phil Reid 838519b89f iio: buffer-dma: Add missing header buffer_impl.h
Add buffer_impl.h as buffer.h was split into interface for using and
for internals. Without this industrialio-buffer-dma.c fails
to compile.

Fixes:
commit 33dd94cb97 ("iio:buffer.h - split
into buffer.h and buffer_impl.h")

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-13 20:55:59 +01:00
Greg Kroah-Hartman 7bf1e44f86 Merge 4.12-rc5 into staging-next
We want the IIO fixes and other staging driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 08:20:47 +02:00
Greg Kroah-Hartman 069a0f32c9 Merge 4.12-rc5 into char-misc-next
We want the char/misc driver fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-12 08:18:10 +02:00
Wolfram Sang 9010624cc5 hwmon: (ads1015) move header file out of I2C realm
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11 17:08:19 -07:00
Andy Shevchenko ed3edc0909 iio: accel: mma9551: use NULL for GPIO connection ID
While using GPIO library API we might get into troubles in the future,
because we can't rely on label name in the driver since vendor firmware
might provide any GPIO pin there, e.g. "reset", and even mark it in _DSD
(in which case the request will fail).

To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.

The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, is going to be stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, will
make request fail.

See
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git/commit/?h=for-next&id=ed7fcf1ed5ea4ea01243995ae085757a77cf0f3e for more background.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 16:05:53 +01:00
Benjamin Gaignard 9eba381bf8 iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode
Add validate function to be use to use the correct trigger.
Add an attribute to configure device mode like for quadrature and
enable modes

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:59:05 +01:00
Benjamin Gaignard d89e119a08 iio: add hardware triggered operating mode
Devices, like stm32 timer, could be triggered by hardware events which
are not buffer or software events. However it could be necessary to
validate the triggers like it is done for buffer or event triggered modes.
This patch add a new INDIO_HARDWARE_TRIGGERED operating mode for this
kind of devices and allow this mode to register trigger consumer.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:58:41 +01:00
Arvind Yadav 4e36a8ad4d iio: Aspeed ADC - Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Rick Altherr <raltherr@google.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:08:20 +01:00
Hans de Goede 440d303c77 Revert "iio: accel: bma180: Add support for BMA250E"
This reverts commit f1320b0951.

The BMA250E is already handled by the bmc150-accel-i2c driver, which
supports the "E" variants of the BMA??? accelerometers better then the
bma180 driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:41 +01:00
Hans de Goede 49dce0f486 Revert "iio: accel: bma180: Add ACPI enumeration support for BMA250E"
This reverts commit 5333e88661.

The BMA250E is already handled by the bmc150-accel-i2c driver, which
supports the "E" variants of the BMA??? accelerometers better then the
bma180 driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:40 +01:00
Lorenzo Bianconi c83761ff0a iio: magnetometer: st_magn_spi: fix spi_device_id table
Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series
does not support spi interface

Fixes: 872e79add7 (iio: magn: Add STMicroelectronics magn driver)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:40 +01:00
Lorenzo Bianconi 93b1b02fae iio: accel: st_accel_spi: fix spi_device_id table
Remove LSM303DL, LSM303DLM, LSM303DLH, LSM303DLHC from st_accel_id_table
since LSM303DL series does not support spi interface

Fixes: d62511689d (iio: accel: Add STMicroelectronics accel driver)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:39 +01:00
Jean-Baptiste Maneyrol 8a12ed7df7 iio: imu: inv_mpu6050: replace sprintf with scnprintf
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:38 +01:00
Jean-Baptiste Maneyrol 68cd6e5b20 iio: imu: inv_mpu6050: fix lock issues by using our own mutex
There are several locks issues when using buffer and direct polling
data at the same time. Use our own mutex for managing locking and
block simultaneous use of buffer and direct polling by using
iio_device_{claim/release}_direct_mode. This makes chip_config
enable bit obsolete, so delete it.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:37 +01:00
Lorenzo Bianconi 89ca88a7cd iio: imu: st_lsm6dsx: support active-low interrupts
Add support for active low interrupts (IRQF_TRIGGER_LOW and
IRQF_TRIGGER_FALLING). Configure the device as active high or low
according to the requested irq line.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:36 +01:00
Andy Shevchenko 405570b4a5 iio: adc: ad7791: Use sysfs_match_string() helper
Use sysfs_match_string() helper instead of open coded variant.

Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <Michael.Hennerich@analog.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:35 +01:00
Andy Shevchenko 02e9a0ff0d iio: core: Use __sysfs_match_string() helper
Use __sysfs_match_string() helper instead of open coded variant.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:34 +01:00
Andy Shevchenko c306dbd88c iio: proximity: sx9500: Use devm_gpiod_get()
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:34 +01:00
Sebastian Reichel 7af1a06776 iio: adc: twl4030: Fold twl4030-madc.h into driver
twl4030-madc.h is no longer used by anything outside of
the iio driver, so it can be merged into the driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:33 +01:00
Sebastian Reichel 842eb60b04 iio: adc: twl4030: Remove twl4030_madc_request.func_cb
This functionality is not used by the IIO subsystem. Due
to removal of legacy API it can also be removed.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:32 +01:00
Sebastian Reichel 42ab9278eb iio: adc: twl4030: Unexport twl4030_madc_conversion()
All madc users have been converted to IIO API, so drop the
legacy API. The function is still used inside of the driver.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:31 +01:00
Sebastian Reichel 6576ff740f iio: adc: twl4030: Drop twl4030_get_madc_conversion()
Drop legacy twl4030_get_madc_conversion() method. It has been
used by drivers to get madc data before it conversion to IIO
API. There are no users in the mainline kernel anymore.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:30 +01:00
Fabrice Gasnier 95e339b6e8 iio: adc: stm32: add support for STM32H7
Add support for STM32H7 Analog to Digital Converter. It has up
to 20 external channels, resolution ranges from 8 to 16bits.
Either bus or asynchronous adc clock may be used.

Add registers & bitfields definition. Also add new configuration
options to enter/exit powerdown and perform self-calibration.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:29 +01:00
Fabrice Gasnier 204a6a25db iio: adc: stm32: make per instance bus clock optional
STM32F4 requires one clock per ADC instance for register access. But,
newer version of ADC hardware block have common bus clock for all
instances (per instance driver isn't responsible for getting it).
So, make it optional by default. Still, enforce it's required on STM32F4.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:26 +01:00
Fabrice Gasnier 64ad7f6438 iio: adc: stm32: introduce compatible data cfg
Prepare support for stm32h7 adc variant by introducing compatible
configuration data.
Move STM32F4 specific stuff to compatible data structure:
- registers & bit fields
- input channels data
- start/stop procedures
- trigger definitions

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:25 +01:00
Fabrice Gasnier 9fd243c4fb iio: adc: stm32: make core adc clock optional by default
Analog clock input is mandatory on stm32f4. But newer version of
ADC hardware block allow to select either bus clock or asynchronous
clock, for analog circuitry.

So, make it optional by default, but enforce clk presence on stm32f4.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:24 +01:00
Martin Blumenstingl 103a07d427 iio: adc: meson-saradc: fix potential crash in meson_sar_adc_clear_fifo
meson_sar_adc_clear_fifo passes a 0 as value-pointer to regmap_read().
In case of the meson-saradc driver this ends up in regmap_mmio_read(),
where the value-pointer is de-referenced unconditionally to assign the
value which was read.
Fix this by passing an actual pointer, even though all we want to do is
to discard the value.

As a side-effect this fixes a sparse warning ("Using plain integer as
NULL pointer") as reported by Paolo Cretaro.

Fixes: 3adbf34273 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs")
Reported-by: Paolo Cretaro <paolocretaro@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:00:13 +01:00
Peter Rosin 7ba9df54b0 iio: multiplexer: new iio category and iio-mux driver
When a multiplexer changes how an iio device behaves (for example
by feeding different signals to an ADC), this driver can be used
to create one virtual iio channel for each multiplexer state.

Depends on the generic multiplexer subsystem.

Cache any ext_info values from the parent iio channel, creating a private
copy of the ext_info attributes for each multiplexer state/channel.

Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:29:26 +09:00
Peter Rosin 8a848e7549 iio: inkern: api for manipulating ext_info of iio channels
Extend the inkern api with functions for reading and writing ext_info
of iio channels.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03 19:29:26 +09:00
Wei Yongjun 1454e15bc2 iio: adc: mxs-lradc: Fix return value check in mxs_lradc_adc_probe()
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test. Also add NULL test for iores.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 10:52:31 +01:00
Stefan Brüns 18edac2e22 iio: adc: Fix integration time/averaging for INA219/220
INA226/230/231 has integration times per voltage channel and common
averaging setting for both channels, while the INA219/220 only has a
combined integration time/averaging setting per channel.
Only expose the averaging attribute for the INA226, and expose the correct
integration times for the INA219.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 10:01:57 +01:00
Paolo Cretaro 6b503b216d iio: adc: meson-saradc: use NULL instead of 0 for pointer
Fix sparse warning: Using plain integer as NULL pointer

Signed-off-by: Paolo Cretaro <paolocretaro@gmail.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 09:55:26 +01:00
Arvind Yadav 42d97ac6a8 iio:adc:lpc32xx Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 09:55:25 +01:00
Paolo Cretaro f4f93bf77d iio: adc: mxs-lradc: fix non-static symbol warnings
Fix sparse warning "symbol foo was not declared. Should it be static?"
for the following symbols:
mx23_lradc_adc_irq_names
mx28_lradc_adc_irq_names
iio_dev_attr_in_voltage0_scale_available
iio_dev_attr_in_voltage1_scale_available
iio_dev_attr_in_voltage2_scale_available
iio_dev_attr_in_voltage3_scale_available
iio_dev_attr_in_voltage4_scale_available
iio_dev_attr_in_voltage5_scale_available
iio_dev_attr_in_voltage6_scale_available
iio_dev_attr_in_voltage7_scale_available
iio_dev_attr_in_voltage10_scale_available
iio_dev_attr_in_voltage11_scale_available
iio_dev_attr_in_voltage12_scale_available
iio_dev_attr_in_voltage13_scale_available
iio_dev_attr_in_voltage14_scale_available
iio_dev_attr_in_voltage15_scale_available

Signed-off-by: Paolo Cretaro <paolocretaro@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 09:55:25 +01:00
Jonathan Cameron e18788afeb Revert "iio: hi8435: cleanup reset gpio"
This reverts commit 61305664a5.

This commit was applied prematurely and will break some existing
situations where the signal is inverted as part of voltage level
conversions.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 09:55:24 +01:00
Arvind Yadav 0a178fd732 iio: adc: xilinx: Handle return value of clk_prepare_enable
clk_prepare_enable() can fail here and we must check its return value.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 09:55:23 +01:00
Jean-Baptiste Maneyrol 948588e25b iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500
Starting from MPU6500, accelerometer dlpf is set in a separate
register named ACCEL_CONFIG_2.
Add this new register in the map and set it for the corresponding
chips.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 09:40:40 +01:00
Stefan Brüns 84b84dc19b iio: adc: ina2xx: Make use of attribute flags consistent on all channels
Flags for shared channel attributes should be set on all channels of a
channel set. I.e. SAMP_FREQUENCY and OVERSAMPLING_RATIO are set on the
in_voltage{0,1} channels, thus should be set on in_power, in_current.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 08:43:20 +01:00
Nikita Yushchenko f06a0d2c88 iio: hi8435: remote ampersands from hi8435_info definition
C syntax allows apersands when initializing structures fields with
function pointers, but in Linux sources ampersands are normally not used
in thix context.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 08:43:19 +01:00
Tony Lindgren 9d965236fe iio: adc: cpcap: Remove hung interrupt quirk
This is no longer needed as the real problem was interrupt flags
not getting passed properly from device tree to the cpcap-core.c
mfd driver. This got fixed with commit ac89473213 ("mfd: cpcap:
Fix interrupt to use level interrupt") So let's remove ADC
interrupt specific the quirk.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 08:43:17 +01:00
Tony Lindgren 951d21de88 iio: adc: cpcap: Fix die temperature
It seems that "MC13783 Power Management and Audio Ciruit User's Guide"
MC1378UG.pdf documents several similar components as in the CPCAP PMIC.

Chapter "9.5.5 Die Temperature and UID" says that the die temperature
value is 282 at 25C with LSB of -1.14C. Converting CPCAP PMIC channel3
values with following seems to produce values that make sense for a
PMIC die:

temperature = 25000 + ((regval - 282) * 114)

As we don't have any other documentation, let's assume the die
temperature is unconfigured in the Motorola mapphone Linux kernel
and the current temperature conversion table should be only used
for the battery thermistor and not for the die temperature.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 08:43:16 +01:00
Tony Lindgren 3f9f3a1a14 iio: adc: cpcap: Fix default register values and battery temperature
Looking at the register dumps from Android kernel on droid 4, I noticed
the values with the mainline kernel don't match. Let's fix this by
initializing the ADC registers to what Android does.

For getting correct values from the battery thermistor, we need to
toggle the CPCAP_BIT_THERMBIAS_EN when measuring battery temperature
to get correct battery temperatures. And looks like we also need to
wait a little bit before reading the battery temperature as otherwise
the results are inaccurate.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-03 08:43:15 +01:00
Greg Kroah-Hartman ca9280d1f8 First set of new device support, features and cleanups for IIO in the 4.13 cycle
Two entirely new drivers in here plus the usual range of cleanups and features.
 
 New device support
 * ad5064
   - add ltc2631, ltc2633 and ltc2635 support.
 * bma180
   - trivial support for bma250e (new id)
 * hid-sensor-rotation
   - add relative orientation and geometric orientation support.
 * isl29028
   - add isl29030 support (its effectively the same part from a driver point of
   view)
 * maxim_thermocouple
   - add max31856 id.
 * meson-saradc
   - add meson8b SoC adc support.
 * ti-adc084s021
   - new driver and bindings.
 * ti-adc108s102
   - new driver and bindings.
 
 Staging graduations
 * isl29028
 
 Features
 * bma180
   - ACPI enumeration for BMA250E which is used in various x86 tablets.
 * hi8453
   - add raw access rather than only events.
 * hid-sensor-hub
   - Implement batch mode in which we can set a threshold on the amount of time
   between data coming from the fifos.  This is the first device to do this
   rather than use a watershed on the number of samples.
 * hts221
   - power management support
 * lsm6dsx
   - add system power management support.
 * rpr0521
   - sampling frequency read / write
 * stm32-trigger
   - add support for TRG02 triggers.
 * tsl2583
   - runtime power management support.
 
 Cleanups
 * core
   - inkern: fix a double unlock in iio_read_available_channel_raw when raw
   value doesn't appear to be raw (error path).
   - fixup accidental sizeof pointer in iio_device_add_mask_type.
 * docs
   - fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
 * tools
   - use local include/uapi headers to ensure always up to date.
   - increase length of allowed trigger names.
 * ad9834
   - symbolic to octal permissions.
 * ade7753
   - symbolic to octal permissions.
   - fix indentation
 * ade7754
   - symbolic to octal permissions.
 * ade7758
   - symbolic to octal permissions.
 - ade7854
   - symbolic to octal permissions.
 * as3935
   - move out of storm check to given consistent results for raw and processed
   values.
 * bmp280
   - fix bme280 naming in Kconfig help.
 * hi8435
   - avoid garbage on event after enable.
   - add missing in_voltage_sensing_mode_available to list possible enum options.
   - handle the reset gpio with the obvious polarity rather than relying on
   DT to provide it correctly.
 * hid-sensors
   - fix a wrong error path scrubbing of return values.
 * hid-sensors-accel
   - drop static on a local variable
 * hid-sensors-rotation
   - Add missing scale and offset property parsing support.
 * ina2xx
   - Fix a bad use of GENMASK and some typos and whitespace issues.
 * isl29018
   - only declare the ACPI table when ACPI is enabled.
 * isl29028
   - fix proximity sleep times.
 * lsm6dsx
   - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
   dealing with the various PM config variables.
 * meson-saradc
   - mark meson_sar_adc_data static and const.
 * rcar-gyroadc
   - derive the interface clock speed from the fck clock on the basis they are
   the same actual clock.
   - drop the now unused if clock from the bindings.
 * rpr0521
   - disable sensor when marked as such rather than always enabling it.
   - poweroff if probe fails and we can talk to device.
   - make sure device powered off when it doesn't need to be on.
   - use sizeof rather than hardcoded size on value read.
   - whitespace fixup.
   - reorder channel numbers ready for buffered support which didn't quite
   make this pull request.
 * st-accel
   - fix platform data initialization to allow remove and reprobe.
 * st-pressure
   - fix platform data initialization to allow remove and reprobe.
 * tsl2x7x
   - S_IRUGO, S_IWUSR to octal values
   - rename driver for consistency with more recent drivers
   - drop FSF mailing address
   - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
   relevant function renames.
 * zpa2326
   - report an error for consistency with other error paths.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlkjSHkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojDqQ//TVibBBZ0GgA+MwjIMDCpYL6CW4l+Et5v
 bD1EThc+qf3jv9kWbBz6WgySj9koZeF/hc0GN7x8XF57TeF/8sXhtbZKQ0za0Ouf
 uKAfYNi7jtdA4UEFawYrFUGIZtgQlbll/DKj7x2yDZtwIge9QF61fzPehGpq0u3b
 IiNlNFQSTKXOHi5tobMXXdBFL90m6kqDZM5ZwAWtQoSu1xQTjCsxu/LMJAJ3H7rU
 KEptEhc80kAvGqflOvw/HMaU7O7SXAhW3sQnXM2ksnDScGZ+zNzLcoca1YfM73rv
 x3vM/XL93A6CcRQkzFUC5vbtVVl00BMI7G3PQTGDOWWPgUPksLVIzfJR9GOqNmIJ
 W3HVwQbDZPvAbubvFHlUBa9ys4cbcmwU9214S57DvzVEt+cvpdujjIZ2Ulw3sVqN
 3xB1P9kNlcYvmBBu6LbP5GTDEu+VEETTjwj3osyimi56Zt44pJhoT68D46SD34Zw
 i3LCMFbbdJzEK4UWsvoBKFsTPipXgOntYDXaMZbULjtmJ6PEw0feubQIpMwtF5iw
 4fGk/1Q6l//rItJlXZE9PPiEBbXZ856lk/KQn+9vRABCrFni+7HWf6aDvkjf14o0
 8W+P/kAcXOPrToN2+NnAbIh7c9PLYmFWJa7DvDnQ5Guy0GStlxG18QEMNAhf39/0
 j/xopB1g8MI=
 =XLVY
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.13 cycle

Two entirely new drivers in here plus the usual range of cleanups and features.

New device support
* ad5064
  - add ltc2631, ltc2633 and ltc2635 support.
* bma180
  - trivial support for bma250e (new id)
* hid-sensor-rotation
  - add relative orientation and geometric orientation support.
* isl29028
  - add isl29030 support (its effectively the same part from a driver point of
  view)
* maxim_thermocouple
  - add max31856 id.
* meson-saradc
  - add meson8b SoC adc support.
* ti-adc084s021
  - new driver and bindings.
* ti-adc108s102
  - new driver and bindings.

Staging graduations
* isl29028

Features
* bma180
  - ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
  - add raw access rather than only events.
* hid-sensor-hub
  - Implement batch mode in which we can set a threshold on the amount of time
  between data coming from the fifos.  This is the first device to do this
  rather than use a watershed on the number of samples.
* hts221
  - power management support
* lsm6dsx
  - add system power management support.
* rpr0521
  - sampling frequency read / write
* stm32-trigger
  - add support for TRG02 triggers.
* tsl2583
  - runtime power management support.

Cleanups
* core
  - inkern: fix a double unlock in iio_read_available_channel_raw when raw
  value doesn't appear to be raw (error path).
  - fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
  - fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
  - use local include/uapi headers to ensure always up to date.
  - increase length of allowed trigger names.
* ad9834
  - symbolic to octal permissions.
* ade7753
  - symbolic to octal permissions.
  - fix indentation
* ade7754
  - symbolic to octal permissions.
* ade7758
  - symbolic to octal permissions.
- ade7854
  - symbolic to octal permissions.
* as3935
  - move out of storm check to given consistent results for raw and processed
  values.
* bmp280
  - fix bme280 naming in Kconfig help.
* hi8435
  - avoid garbage on event after enable.
  - add missing in_voltage_sensing_mode_available to list possible enum options.
  - handle the reset gpio with the obvious polarity rather than relying on
  DT to provide it correctly.
* hid-sensors
  - fix a wrong error path scrubbing of return values.
* hid-sensors-accel
  - drop static on a local variable
* hid-sensors-rotation
  - Add missing scale and offset property parsing support.
* ina2xx
  - Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
  - only declare the ACPI table when ACPI is enabled.
* isl29028
  - fix proximity sleep times.
* lsm6dsx
  - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
  dealing with the various PM config variables.
* meson-saradc
  - mark meson_sar_adc_data static and const.
* rcar-gyroadc
  - derive the interface clock speed from the fck clock on the basis they are
  the same actual clock.
  - drop the now unused if clock from the bindings.
* rpr0521
  - disable sensor when marked as such rather than always enabling it.
  - poweroff if probe fails and we can talk to device.
  - make sure device powered off when it doesn't need to be on.
  - use sizeof rather than hardcoded size on value read.
  - whitespace fixup.
  - reorder channel numbers ready for buffered support which didn't quite
  make this pull request.
* st-accel
  - fix platform data initialization to allow remove and reprobe.
* st-pressure
  - fix platform data initialization to allow remove and reprobe.
* tsl2x7x
  - S_IRUGO, S_IWUSR to octal values
  - rename driver for consistency with more recent drivers
  - drop FSF mailing address
  - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
  relevant function renames.
* zpa2326
  - report an error for consistency with other error paths.
2017-05-29 15:53:42 +02:00
Greg Kroah-Hartman 5a4733df7e First set of IIO fixes in the 4.12 cycle.
Matt finally set up the lightning storm he needed to test the as3935.
 
 * core
   - Fix a null pointer deference in iio_trigger_write_current when changing
   from a non existent trigger to another non existent trigger.
 * a3935
   - Recalibrate the RCO after resume.
   - Fix interrupt mask so that we actually get some interrupts.
   - Use iio_trigger_poll_chained as we aren't in interrupt context.
 * am335x
   - Fix wrong allocation size provided for private data to iio_device_alloc.
 * bcm_iproc
   - Swapped primary and secondary isr handlers.
 * ltr501
   - Fix swapped als/ps register fields when enabling interrupts
 * max9611
   - Wrong scale factor for the shunt_resistor attribute.
 * sun4-gpadc
   - Module autoloading fixes by adding the device table declarations.
   - Fix parent device being used in devm functions.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlkjMIARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojKvA//aDwMkrmHT15IsP6kRWRp8MJ66253YIDK
 ZRwr5pu4TXPX6df3HIV7meSi1mYOTX/UHryGsMIx3iwr69jhTQzSf+frZsYVMkLy
 IsliKjkbUrkzFlPxicpt4aq1w8xqwkpdWzo27Y1xQMf2UOiNtWSSCRsjBgxr7mmg
 Xk5yrvbk4XQ17P/pZrg6NJukSd8XXyJn1Jf9cfBpYfmSwgbRNJZbAmrU3uCtL0li
 HK/akyaJYRHVcuv8GdT4eosOd/mw8EkMPe4v5Uv/4p1JWuHJNtCLhEA4AdrMBheK
 5GrPpviNRD0aQTvTDRqZW9e2CIwS1UTWYPA+gboOhSkErta36+DnVdVJhVquD3t5
 mSifsp2DYC7oMdHtYpihyJClkYm0xNZl/R/cMtroDJzt/nymS9jWgVE4TQEDxpa2
 tLbVqre6L9ZOUd+XXvmEyMoPtRELPfmi87TDdnxinAaSyCcWOEjf0B+cwTMXrcWb
 yJ8P8lTqQN/aBeQviEV0SjXk2GptN6zMaeIge8TPBljFRhae1ECbSGPflPQNzASJ
 qLL5ZV0fTc9ZwKdbAtfDh74dOGU1aRh6UK7ZooTR5HZmoHdyFh2lg/aKtGtVRYG1
 5FAnTSZxgYkRviZhVLnJzpVRepy1Xa3llzt4J46Uyufy6hQUt9qECwR/udrO/52V
 lfu9dzVe6bE=
 =luks
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-4.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes in the 4.12 cycle.

Matt finally set up the lightning storm he needed to test the as3935.

* core
  - Fix a null pointer deference in iio_trigger_write_current when changing
  from a non existent trigger to another non existent trigger.
* a3935
  - Recalibrate the RCO after resume.
  - Fix interrupt mask so that we actually get some interrupts.
  - Use iio_trigger_poll_chained as we aren't in interrupt context.
* am335x
  - Fix wrong allocation size provided for private data to iio_device_alloc.
* bcm_iproc
  - Swapped primary and secondary isr handlers.
* ltr501
  - Fix swapped als/ps register fields when enabling interrupts
* max9611
  - Wrong scale factor for the shunt_resistor attribute.
* sun4-gpadc
  - Module autoloading fixes by adding the device table declarations.
  - Fix parent device being used in devm functions.
2017-05-22 21:53:09 +02:00
Quentin Schulz 82237f2682 iio: adc: sun4i-gpadc-iio: fix parent device being used in devm function
For the sake of DT binding stability, this IIO driver is a child of an
MFD driver for Allwinner A10, A13 and A31 because there already exists a
DT binding for this IP. The MFD driver has a DT node but the IIO driver
does not.

The IIO device registers the temperature sensor in the thermal framework
using the DT node of the parent, the MFD device, so the thermal
framework could match the phandle to the MFD device in the DT and the
struct device used to register in the thermal framework.

devm_thermal_zone_of_sensor_register was previously used to register the
thermal sensor with the parent struct device of the IIO device,
representing the MFD device. By doing so, we registered actually the
parent in the devm routine and not the actual IIO device.

This lead to the devm unregister function not being called when the IIO
module driver is removed. It resulted in the thermal framework still
polling the get_temp function of the IIO module while the device doesn't
exist anymore, thus generated a kernel panic.

Use the non-devm function instead and do the unregister manually in the
remove function.

Fixes: d1caa99055 ("iio: adc: add support for Allwinner SoCs ADC")

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:17:40 +01:00
Jan Kiszka 7e87d11c9b iio: adc: Add support for TI ADC108S102 and ADC128S102
This is an upstream port of an IIO driver for the TI ADC108S102 and
ADC128S102. The former can be found on the Intel Galileo Gen2 and the
Siemens SIMATIC IOT2000. For those boards, ACPI-based enumeration is
included.

Due to the lack of regulators under ACPI, we hard-code the voltage
provided to the VA pin of the ADC to 5 V, the value used on Galileo and
IOT2000. For DT usage, the regulator "vref-supply" provides this
information. Note that DT usage has not been tested.

Original author: Bogdan Pricop <bogdan.pricop@emutex.com>
Ported from Intel Galileo Gen2 BSP to Intel Yocto kernel:
Todor Minchev <todor@minchev.co.uk>.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:11:14 +01:00
Lorenzo Bianconi 3cec485017 iio: imu: st_lsm6dsx: substitute ifdef CONFIG_PM with __maybe_unused macro
Get rid of #ifdef CONFIG_PM by adding __maybe_unused macro to
st_lsm6dsx_suspend and st_lsm6dsx_resume function declarations

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:07:59 +01:00
Hans de Goede 5333e88661 iio: accel: bma180: Add ACPI enumeration support for BMA250E
Some x86 tablets use the BMA250E accelerometer, add support for this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:17 +01:00
Hans de Goede f1320b0951 iio: accel: bma180: Add support for BMA250E
The BMA250E adds a new fifo mode and is fully backwards compatible
with the BMA250, but with a different chip-id.

This commit adds support for it by adjusting the chip-id check and
otherwise treating it as a regular BMA250.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:16 +01:00
Mikko Koivunen 9ece370b02 iio: light: rpr0521 channel numbers reordered
Move proximity channel from last to first in structs to avoid confusion
later with buffered triggers. Proximity data output is first in rpr0521
register map.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:15 +01:00
Mikko Koivunen 734c442303 iio: light: rpr0521 proximity offset read/write
Add sysfs read/write proximity offset feature. Offset is read/write from
sensor registers. Values are proximity raw 10-bit values. After applying
offset value, output values will be (measured_raw - offset_value). Output
values are unsigned so offset value doesn't make output negative.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:15 +01:00
Mikko Koivunen c91a88ef84 iio: light: rpr0521 sample_frequency read/write
Add sysfs read/write sample frequency.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:14 +01:00
Mikko Koivunen 624c389e10 iio: light: rpr0521 whitespace fixes
Just whitespace change, no functional changes.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:13 +01:00
Mikko Koivunen ae5916501b iio: light: rpr0521 magic number to sizeof() on value read
Changed magic number to sizeof() on value read.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:12 +01:00
Mikko Koivunen 484c314b90 iio: light: rpr0521 on-off sequence change for CONFIG_PM
Refactor _set_power_state(), _resume() and _suspend().
Enable measurement only when needed, not in _init(). System can suspend
during measurement and measurement is continued on resume.
Pm turns off measurement when both ps and als measurements are disabled for
2 seconds. During off-time the power save is 20-500mA, typically 180mA.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:12 +01:00
Mikko Koivunen 12d7494913 iio: light: rpr0521 poweroff for probe fails
Set sensor measurement off after probe fail in pm_runtime_set_active() or
iio_device_register(). Without this change sensor measurement stays on
even though probe fails on these calls.

This is maybe rare case, but causes constant power drain without any
benefits when it happens. Power drain is 20-500uA, typically 180uA.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:11 +01:00
Mikko Koivunen f87fa26177 iio: light: rpr0521 disable sensor -bugfix
Sensor was marked enabled on each call even if the call was for disabling
sensor.

Signed-off-by: Mikko Koivunen <mikko.koivunen@fi.rohmeurope.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 15:06:10 +01:00
Franziska Naepelt 7cc3bff4ef iio: light: ltr501 Fix interchanged als/ps register field
The register mapping for the IIO driver for the Liteon Light and Proximity
sensor LTR501 interrupt mode is interchanged (ALS/PS).
There is a register called INTERRUPT register (address 0x8F)
Bit 0 represents PS measurement trigger.
Bit 1 represents ALS measurement trigger.
This two bit fields are interchanged within the driver.
see datasheet page 24:
http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/S_110_LTR-501ALS-01_PrelimDS_ver1%5B1%5D.pdf

Signed-off-by: Franziska Naepelt <franziska.naepelt@idt.com>
Fixes: 7ac702b314 ("iio: ltr501: Add interrupt support")
Acked-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 14:47:39 +01:00
Raveendra Padasalagi f7d86ecf83 iio: adc: bcm_iproc_adc: swap primary and secondary isr handler's
The third argument of devm_request_threaded_irq() is the primary
handler. It is called in hardirq context and checks whether the
interrupt is relevant to the device. If the primary handler returns
IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is
scheduled to run in process context.

bcm_iproc_adc.c uses the secondary handler as the primary one
and the other way around. So this patch fixes the same, along with
re-naming the secondary handler and primary handler names properly.

Tested on the BCM9583XX iProc SoC based boards.

Fixes: 4324c97ece ("iio: Add driver for Broadcom iproc-static-adc")
Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 13:01:17 +01:00
Marcin Niestroj 4eecbe8188 iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()
In case oldtrig == trig == NULL (which happens when we set none
trigger, when there is already none set) there is a NULL pointer
dereference during iio_trigger_put(trig). Below is kernel output when
this occurs:

[   26.741790] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   26.750179] pgd = cacc0000
[   26.752936] [00000000] *pgd=8adc6835, *pte=00000000, *ppte=00000000
[   26.759531] Internal error: Oops: 17 [#1] SMP ARM
[   26.764261] Modules linked in: usb_f_ncm u_ether usb_f_acm u_serial usb_f_fs libcomposite configfs evbug
[   26.773844] CPU: 0 PID: 152 Comm: synchro Not tainted 4.12.0-rc1 #2
[   26.780128] Hardware name: Freescale i.MX6 Ultralite (Device Tree)
[   26.786329] task: cb1de200 task.stack: cac92000
[   26.790892] PC is at iio_trigger_write_current+0x188/0x1f4
[   26.796403] LR is at lock_release+0xf8/0x20c
[   26.800696] pc : [<c0736f34>]    lr : [<c016efb0>]    psr: 600d0013
[   26.800696] sp : cac93e30  ip : cac93db0  fp : cac93e5c
[   26.812193] r10: c0e64fe8  r9 : 00000000  r8 : 00000001
[   26.817436] r7 : cb190810  r6 : 00000010  r5 : 00000001  r4 : 00000000
[   26.823982] r3 : 00000000  r2 : 00000000  r1 : cb1de200  r0 : 00000000
[   26.830528] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   26.837683] Control: 10c5387d  Table: 8acc006a  DAC: 00000051
[   26.843448] Process synchro (pid: 152, stack limit = 0xcac92210)
[   26.849475] Stack: (0xcac93e30 to 0xcac94000)
[   26.853857] 3e20:                                     00000001 c0736dac c054033c cae6b680
[   26.862060] 3e40: cae6b680 00000000 00000001 cb3f8610 cac93e74 cac93e60 c054035c c0736db8
[   26.870264] 3e60: 00000001 c054033c cac93e94 cac93e78 c029bf34 c0540348 00000000 00000000
[   26.878469] 3e80: cb3f8600 cae6b680 cac93ed4 cac93e98 c029b320 c029bef0 00000000 00000000
[   26.886672] 3ea0: 00000000 cac93f78 cb2d41fc caed3280 c029b214 cac93f78 00000001 000e20f8
[   26.894874] 3ec0: 00000001 00000000 cac93f44 cac93ed8 c0221dcc c029b220 c0e1ca39 cb2d41fc
[   26.903079] 3ee0: cac93f04 cac93ef0 c0183ef0 c0183ab0 cb2d41fc 00000000 cac93f44 cac93f08
[   26.911282] 3f00: c0225eec c0183ebc 00000001 00000000 c0223728 00000000 c0245454 00000001
[   26.919485] 3f20: 00000001 caed3280 000e20f8 cac93f78 000e20f8 00000001 cac93f74 cac93f48
[   26.927690] 3f40: c0223680 c0221da4 c0246520 c0245460 caed3283 caed3280 00000000 00000000
[   26.935893] 3f60: 000e20f8 00000001 cac93fa4 cac93f78 c0224520 c02235e4 00000000 00000000
[   26.944096] 3f80: 00000001 000e20f8 00000001 00000004 c0107f84 cac92000 00000000 cac93fa8
[   26.952299] 3fa0: c0107de0 c02244e8 00000001 000e20f8 0000000e 000e20f8 00000001 fbad2484
[   26.960502] 3fc0: 00000001 000e20f8 00000001 00000004 beb6b698 00064260 0006421c beb6b4b4
[   26.968705] 3fe0: 00000000 beb6b450 b6f219a0 b6e2f268 800d0010 0000000e cac93ff4 cac93ffc
[   26.976896] Backtrace:
[   26.979388] [<c0736dac>] (iio_trigger_write_current) from [<c054035c>] (dev_attr_store+0x20/0x2c)
[   26.988289]  r10:cb3f8610 r9:00000001 r8:00000000 r7:cae6b680 r6:cae6b680 r5:c054033c
[   26.996138]  r4:c0736dac r3:00000001
[   26.999747] [<c054033c>] (dev_attr_store) from [<c029bf34>] (sysfs_kf_write+0x50/0x54)
[   27.007686]  r5:c054033c r4:00000001
[   27.011290] [<c029bee4>] (sysfs_kf_write) from [<c029b320>] (kernfs_fop_write+0x10c/0x224)
[   27.019579]  r7:cae6b680 r6:cb3f8600 r5:00000000 r4:00000000
[   27.025271] [<c029b214>] (kernfs_fop_write) from [<c0221dcc>] (__vfs_write+0x34/0x120)
[   27.033214]  r10:00000000 r9:00000001 r8:000e20f8 r7:00000001 r6:cac93f78 r5:c029b214
[   27.041059]  r4:caed3280
[   27.043622] [<c0221d98>] (__vfs_write) from [<c0223680>] (vfs_write+0xa8/0x170)
[   27.050959]  r9:00000001 r8:000e20f8 r7:cac93f78 r6:000e20f8 r5:caed3280 r4:00000001
[   27.058731] [<c02235d8>] (vfs_write) from [<c0224520>] (SyS_write+0x44/0x98)
[   27.065806]  r9:00000001 r8:000e20f8 r7:00000000 r6:00000000 r5:caed3280 r4:caed3283
[   27.073582] [<c02244dc>] (SyS_write) from [<c0107de0>] (ret_fast_syscall+0x0/0x1c)
[   27.081179]  r9:cac92000 r8:c0107f84 r7:00000004 r6:00000001 r5:000e20f8 r4:00000001
[   27.088947] Code: 1a000009 e1a04009 e3a06010 e1a05008 (e5943000)
[   27.095244] ---[ end trace 06d1dab86d6e6bab ]---

To fix that problem call iio_trigger_put(trig) only when trig is not
NULL.

Fixes: d5d24bcc0a ("iio: trigger: close race condition in acquiring trigger reference")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-21 12:36:59 +01:00
Nikita Yushchenko 61305664a5 iio: hi8435: cleanup reset gpio
Reset GPIO is active low.

Currently driver uses gpiod_set_value(1) to clean reset, which depends
on device tree to contain GPIO_ACTIVE_HIGH - that does not match reality.

This fixes driver to use _raw version of gpiod_set_value() to enforce
active-low semantics despite of what's written in device tree. Allowing
device tree to override that only opens possibility for errors and does
not add any value.

Additionally, use _cansleep version to make things work with i2c-gpio
and other sleeping gpio drivers.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-20 17:35:52 +01:00
Nikita Yushchenko bd7026992f iio: hi8435: make in_voltage_sensing_mode_available visible
Possible values of sensing_mode are encoded with strings and actual
strings used are not obvious.

Provide a hint by enabling in_voltage_sensing_mode_available attribute.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-20 17:35:00 +01:00
Nikita Yushchenko ee19ac340c iio: hi8435: avoid garbage event at first enable
Currently, driver generates events for channels if new reading differs
from previous one. This "previous value" is initialized to zero, which
results into event if value is constant-one.

Fix that by initializing "previous value" by reading at event enable
time.

This provides reliable sequence for userspace:
- enable event,
- AFTER THAT read current value,
- AFTER THAT each event will correspond to change.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-20 17:33:52 +01:00
Nikita Yushchenko fa7662e1bd iio: hi8435: add raw access
With current event-only driver, it is not possible for user space
application to know current senses if they don't change since
application starts.

Address that by adding raw access to channels.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-20 17:31:33 +01:00
Matthias Kaehlcke 14b39dce37 iio: light: isl29018: Only declare ACPI table when ACPI is enabled
This fixes the following warning when building with clang:

drivers/iio/light/isl29018.c:808:36: error: variable
    'isl29018_acpi_match' is not needed and will not be emitted
    [-Werror,-Wunneeded-internal-declaration]

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-20 17:07:09 +01:00
Srinivas Pandruvada 138bc7969c iio: hid-sensor-hub: Implement batch mode
HID sensor hubs using Integrated Senor Hub (ISH) has added capability to
support batch mode. This allows host processor to go to sleep for extended
duration, while the sensor hub is storing samples in its internal buffers.

'Commit f4f4673b75 ("iio: add support for hardware fifo")' implements
feature in IIO core to implement such feature. This feature is used in
bmc150-accel-core.c to implement batch mode. This implementation allows
software device buffer watermark to be used as a hint to adjust hardware
FIFO.

But HID sensor hubs don't allow to change internal buffer size of FIFOs.
Instead an additional usage id to set "maximum report latency" is defined.
This allows host to go to sleep upto this latency period without getting
any report. Since there is no ABI to set this latency, a new attribute
"hwfifo_timeout" is added so that user mode can specify a latency.

This change checks presence of usage id to get/set maximum report latency
and if present, it will expose hwfifo_timeout.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-16 19:44:01 +01:00
Brian Masney 371894f5d1 iio: tsl2583: add runtime power management support
This patch adds runtime power management support to the tsl2583 driver.
The device is powered off after two seconds of inactivity. Verified that
the driver still functions correctly using a TSL2581 hooked up to a
Raspberry Pi 2.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-16 19:39:41 +01:00
Lorenzo Bianconi b7079eeac5 iio: humidity: hts221: add power management support
Add system sleep power management support to hts221 driver

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 16:52:33 +01:00
Jacopo Mondi c545171968 iio: adc: max9611: Fix attribute measure unit
The power and current "shunt-resistor" attribute's 'show' function
displays the resistor value in milli-Ohms, while the ABI description
specifies it should be displayed in Ohms. Fix it.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 16:38:55 +01:00
Mårten Lindahl 3691e5a694 iio: adc: add driver for the ti-adc084s021 chip
This adds support for the Texas Instruments ADC084S021 ADC chip.

Signed-off-by: Mårten Lindahl <martenli@axis.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 16:34:11 +01:00
Dan Carpenter 5ba5b437ef iio: adc: ti_am335x_adc: allocating too much in probe
We should be allocating enough information for a tiadc_device struct
which is about 400 bytes but instead we allocate enough for a second
iio_dev struct which is over 2000 bytes.

Fixes: fea89e2dfc ("iio: adc: ti_am335x_adc: use variable names for sizeof() operator")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 16:21:13 +01:00
Mike Looijmans b2d2d2bfca iio:ad5064: Add support for ltc2633 and similar devices
The Linear Technology LTC2631, LTC2633 and LTC2635 are very similar
to the AD5064 device, in particular the LTC2627.

This patch adds support for those devices. Only the LTC2633 has been
tested, which is the 2-channel variant. The LTC2631 is the 1-channel,
and the LTC2635 the 4-channel version. The actual DAC resolution depends
on the exact chip type and can be 12, 10 or 8 bits, using the upper bits
so this has no effect on the register map. The internal reference is set
to 2.5V on "L" versions, and it's 4.096V for "H" versions.

Datasheets:
    LTC2631: http://www.linear.com/docs/26553
    LTC2633: http://www.linear.com/docs/39529
    LTC2635: http://www.linear.com/docs/28754

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 16:16:57 +01:00
Nicholas Mc Guire e7215fe4d5 iio: pressure: zpa2326: report interrupted case as failure
If the timeout-case prints a warning message then probably the interrupted
case should also. Further, wait_for_completion_interruptible_timeout()
returns long not int.

Fixes: commit 03b262f2bb ("iio:pressure: initial zpa2326 barometer support")
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 15:28:14 +01:00
Linus Torvalds 291b38a756 Annotation of module parameters that specify device settings
-----BEGIN PGP SIGNATURE-----
 
 iQIVAwUAWPiW6vSw1s6N8H32AQLOrw/+NTqGf7bjq+64YKS6NfR0XDgE+wNJltGO
 ck7zJW3NHIg76RNu8s0I9xg5aVmwizz3Z5DGROZquaolnezux4tQihZ3AFyxIzLc
 +Y3WHYagcML7yFfjl/WznCLRD5EW3yPln4lCvQO0nW/xICRYeRI057JaIbi2Dtek
 BhcXt3c4AjXDLdYJkgtHV3p2R2mt8hcdFdWqqx6s7JaIThZNRGNzxAgtbcB9k5IW
 HVG9ZEIL73VBYWHrYivzjHYF5rBnNCPt87eOwDQeTOSkhv8te+u9k+bH8vxZw1T0
 XUtDrLBndKiuVo2GUfLkkF8LItx3Q9eLCJYy0joaIliyPqTEsPx9KjQ+Af0cxS9s
 ZPCZ5SYf96stKmDeL5xaMfrAmeyVHJ4lc4JTOqdzbIT8blsOSfYO/03p0ALShSDv
 /RQLaKGlf8Bjoy8PwKFcXb4sIDufcd/U1Av/EMFXxOfgN/u2JUkGKq6EaIM5B68L
 fHPje+aR9VNELPmPjwNOWtmN4I79EH3EItQf7zv0KG+UeKhcHLx/EAcSJ3ZRKEkH
 Lathg7pPOEJGArPiVO79TZzBG01ADn1aiwv65XObMzNZ+54xI/mN/Y1DNF/kL5jU
 XzvNzEjFt8mwMIZGVNdAt4+pDyMfIZGZSyUkSRKFnaQZMIvQrfQIU9RLBYLX5eOx
 +/p0VkIwDpg=
 =lbS7
 -----END PGP SIGNATURE-----

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull hw lockdown support from David Howells:
 "Annotation of module parameters that configure hardware resources
  including ioports, iomem addresses, irq lines and dma channels.

  This allows a future patch to prohibit the use of such module
  parameters to prevent that hardware from being abused to gain access
  to the running kernel image as part of locking the kernel down under
  UEFI secure boot conditions.

  Annotations are made by changing:

        module_param(n, t, p)
        module_param_named(n, v, t, p)
        module_param_array(n, t, m, p)

  to:

        module_param_hw(n, t, hwtype, p)
        module_param_hw_named(n, v, t, hwtype, p)
        module_param_hw_array(n, t, hwtype, m, p)

  where the module parameter refers to a hardware setting

  hwtype specifies the type of the resource being configured. This can
  be one of:

        ioport          Module parameter configures an I/O port
        iomem           Module parameter configures an I/O mem address
        ioport_or_iomem Module parameter could be either (runtime set)
        irq             Module parameter configures an I/O port
        dma             Module parameter configures a DMA channel
        dma_addr        Module parameter configures a DMA buffer address
        other           Module parameter configures some other value

  Note that the hwtype is compile checked, but not currently stored (the
  lockdown code probably won't require it). It is, however, there for
  future use.

  A bonus is that the hwtype can also be used for grepping.

  The intention is for the kernel to ignore or reject attempts to set
  annotated module parameters if lockdown is enabled. This applies to
  options passed on the boot command line, passed to insmod/modprobe or
  direct twiddling in /sys/module/ parameter files.

  The module initialisation then needs to handle the parameter not being
  set, by (1) giving an error, (2) probing for a value or (3) using a
  reasonable default.

  What I can't do is just reject a module out of hand because it may
  take a hardware setting in the module parameters. Some important
  modules, some ipmi stuff for instance, both probe for hardware and
  allow hardware to be manually specified; if the driver is aborts with
  any error, you don't get any ipmi hardware.

  Further, trying to do this entirely in the module initialisation code
  doesn't protect against sysfs twiddling.

  [!] Note that in and of itself, this series of patches should have no
      effect on the the size of the kernel or code execution - that is
      left to a patch in the next series to effect. It does mark
      annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in
      an already existing field"

* tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits)
  Annotate hardware config module parameters in sound/pci/
  Annotate hardware config module parameters in sound/oss/
  Annotate hardware config module parameters in sound/isa/
  Annotate hardware config module parameters in sound/drivers/
  Annotate hardware config module parameters in fs/pstore/
  Annotate hardware config module parameters in drivers/watchdog/
  Annotate hardware config module parameters in drivers/video/
  Annotate hardware config module parameters in drivers/tty/
  Annotate hardware config module parameters in drivers/staging/vme/
  Annotate hardware config module parameters in drivers/staging/speakup/
  Annotate hardware config module parameters in drivers/staging/media/
  Annotate hardware config module parameters in drivers/scsi/
  Annotate hardware config module parameters in drivers/pcmcia/
  Annotate hardware config module parameters in drivers/pci/hotplug/
  Annotate hardware config module parameters in drivers/parport/
  Annotate hardware config module parameters in drivers/net/wireless/
  Annotate hardware config module parameters in drivers/net/wan/
  Annotate hardware config module parameters in drivers/net/irda/
  Annotate hardware config module parameters in drivers/net/hamradio/
  Annotate hardware config module parameters in drivers/net/ethernet/
  ...
2017-05-10 19:13:03 -07:00
Fabrice Gasnier 6fb34812c2 iio: stm32 trigger: Add support for TRGO2 triggers
Add support for TRGO2 trigger that can be found on STM32F7.
Add additional master modes supported by TRGO2.
Register additional "tim[1/8]_trgo2" triggers for timer1 & timer8.
Detect TRGO2 timer capability (master mode selection 2).

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 16:08:10 +01:00
Eduardo Molinas f35327f16b iio: adc: sun4i-gpadc-iio: Fix module autoload when OF devices are registered
If the driver is built as a module, it won't be autloaded if the devices
are registered via OF code because the OF device table
entries are not exported as aliases

Before the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
alias:          platform:sun6i-a31-gpadc-iio
alias:          platform:sun5i-a13-gpadc-iio
alias:          platform:sun4i-a10-gpadc-iio

After the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
alias:          of:N*T*Callwinner,sun8i-a33-thsC*
alias:          of:N*T*Callwinner,sun8i-a33-ths
alias:          platform:sun6i-a31-gpadc-iio
alias:          platform:sun5i-a13-gpadc-iio
alias:          platform:sun4i-a10-gpadc-iio

Signed-off-by: Eduardo Molinas <edu.molinas@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 14:45:41 +01:00
Eduardo Molinas f83e36e0a3 iio: adc: sun4i-gpadc-iio: Fix module autoload when PLATFORM devices are registered
If the driver is built as a module, it won't be autloaded if the devices
are registered via PLATFORM code because the PLATFORM device table
entries are not exported as aliases

Before the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
$

After the patch:
$ modinfo drivers/iio/adc/sun4i-gpadc-iio.ko | grep alias
alias:          platform:sun6i-a31-gpadc-iio
alias:          platform:sun5i-a13-gpadc-iio
alias:          platform:sun4i-a10-gpadc-iio

Signed-off-by: Eduardo Molinas <edu.molinas@gmail.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 14:44:42 +01:00
Stefan Brüns ac23d64def iio: adc: Fix bad GENMASK use, typos, whitespace
Commit 7906dd52c5 ("iio: ina2xx: Fix whitespace and re-order code")
changed the register number of the MASK_ENABLE register from 0x06 to the
value equivalent GENMASK(2,1), although its no mask.
Also fix a typo (INA2_6_6 instead of INA2_2_6), and use the datasheet
name ("Mask/Enable") for the register number define.
Fix bad indentation for channel attributes.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 14:42:12 +01:00
Julia Lawall 40f4b1f031 iio: hid-sensor-accel-3d: Drop unnecessary static
Drop static on a local variable, when the variable is initialized before
use, on every possible execution path through the function.  The static has
no benefit, and dropping it reduces the code size.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@

static T x@p;
...
x = <+...x...+>

@@
identifier x;
expression e;
type T;
position p != bad.p;
@@

-static
 T x@p;
 ... when != x
     when strict
?x = e;
// </smpl>

The change in code size is indicates by the following output from the size
command.

before:
   text    data     bss     dec     hex filename
   3879     512       8    4399    112f drivers/iio/accel/hid-sensor-accel-3d.o

after:
   text    data     bss     dec     hex filename
   3863     512       0    4375    1117 drivers/iio/accel/hid-sensor-accel-3d.o

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 13:56:36 +01:00
Matt Ranostay 9122b54f26 iio: proximity: as3935: fix iio_trigger_poll issue
Using iio_trigger_poll() can oops when multiple interrupts
happen before the first is handled.

Use iio_trigger_poll_chained() instead and use the timestamp
when processed, since it will be in theory be 2 ms max latency.

Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 13:21:55 +01:00
Matt Ranostay 535fba29b3 iio: temperature: maxim_thermocouple: add MAX31856 part
MAX31856 is register equivalent to the MAX31855 but suppports J, N, R,
S, T, E and B type thermocouples in addition to K-type.

Data conversion for the various types happens transparently to the driver
via probe type detection, and a LUT on the sensor.

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 12:36:41 +01:00
Martin Blumenstingl 6c76ed31cd iio: adc: meson-saradc: add Meson8b SoC compatibility
Meson GX SoCs however use some magic bits to prevent simultaneous (=
conflicting, because only consumer should use the FIFO buffer with the
ADC results) usage by the Linux kernel and the bootloader (the BL30
bootloader uses the SAR ADC to read the CPU temperature).
This patch changes guards all BL30 functionality so it is skipped on
SoCs which don't have it. Since the hardware itself doesn't know whether
BL30 is available the internal meson_sar_adc_data is extended so this
information can be provided per of_device_id.data inside the driver.

Additionally the clocks "adc_clk" and "adc_sel" are not provided by the
clock-controller itself. "adc_sel" is not available at all. "adc_clk"
is provided by the SAR ADC IP block itself on Meson8b (and earlier).
This is already supported by the meson_saradc driver.

Finally this introduces new of_device_ids for the Meson8 and Meson8b
SoCs so the driver can be wired up in the corresponding DT.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 12:30:45 +01:00
Martin Blumenstingl c1c2de37c7 iio: adc: meson-saradc: mark all meson_sar_adc_data static and const
These are only passed as of_device_id.data and never modified. Thus we
can mark them as static const, just like the of_device_id instances
where they are used.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 12:22:40 +01:00
Song Hongyan a78587d338 iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support
Add orientation sensor "scale" and "offset" parse support.
These two properties are needed for exponent data conversion.

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Xu Even <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 12:22:36 +01:00
Song Hongyan 00907c7a32 iio: hid-sensor-rotation: Add geomagnetic orientation sensor hid support.
Geomagnetic orientation(AM) sensor is one kind of orientation 6dof sensor.
It gives the device rotation in respect to the earth center and the
magnetic north. The sensor is implemented through use of an accelerometer
and magnetometer do not use gyroscope. It is a standard HID sensor.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf

Geomagnetic orientation(AM) sensor and dev rotation sensor have same
channel and share channel usage id. So the most of the code for relative
orientation sensor can be reused.

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 12:22:33 +01:00
Song Hongyan 9ff88edc5e iio: hid-sensor-rotation: Add relative orientation sensor hid support
Relative orientation(AG) sensor is a 6dof orientation sensor,
it depends on acceleration and gyroscope sensor data. It gives
a quaternion describing the orientation of the device relative
to an initial orientation. It is a standard HID sensor.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf

Relative orientation(AG) sensor and dev rotation sensor have same
channels and share channel usage id. So the most of the code for
relative orientation sensor can be reused.

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Xu Even <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 12:22:27 +01:00
Linus Torvalds c6a677c6f3 Staging/IIO patches for 4.12-rc1
Here is the big staging tree update for 4.12-rc1.  And it's a big one,
 adding about 350k new lines of crap^Wcode, mostly all in a big dump of
 media drivers from Intel.  But there's other new drivers in here as
 well, yet-another-wifi driver, new IIO drivers, and a new crypto
 accelerator.  We also deleted a bunch of stuff, mostly in patch
 cleanups, but also the Android ION code has shrunk a lot, and the
 Android low memory killer driver was finally deleted, much to the
 celebration of the -mm developers.
 
 All of these have been in linux-next with a few build issues that will
 show up when you merge to your tree, I'll follow up with fixes for those
 after this gets merged.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQzzlQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylNMgCcD+GoaF/Ml7YnULRl2GG/526II78AnitZ8qjd
 rPqeowMIewYu9fgckLUc
 =7rzO
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here is the big staging tree update for 4.12-rc1.

  It's a big one, adding about 350k new lines of crap^Wcode, mostly all
  in a big dump of media drivers from Intel. But there's other new
  drivers in here as well, yet-another-wifi driver, new IIO drivers, and
  a new crypto accelerator.

  We also deleted a bunch of stuff, mostly in patch cleanups, but also
  the Android ION code has shrunk a lot, and the Android low memory
  killer driver was finally deleted, much to the celebration of the -mm
  developers.

  All of these have been in linux-next with a few build issues that will
  show up when you merge to your tree"

Merge conflicts in the new rtl8723bs driver (due to the wifi changes
this merge window) handled as per linux-next, courtesy of Stephen
Rothwell.

* tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits)
  staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd
  staging: ks7010: remove line continuations in quoted strings
  staging: vt6656: use tabs instead of spaces
  staging: android: ion: Fix unnecessary initialization of static variable
  staging: media: atomisp: fix range checking on clk_num
  staging: media: atomisp: fix misspelled word in comment
  staging: media: atomisp: kmap() can't fail
  staging: atomisp: remove #ifdef for runtime PM functions
  staging: atomisp: satm include directory is gone
  atomisp: remove some more unused files
  atomisp: remove hmm_load/store/clear indirections
  atomisp: kill off mmgr_free
  atomisp: clean up the hmm init/cleanup indirections
  atomisp: handle allocation calls before init in the hmm layer
  staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver
  staging: fsl-dpaa2/eth: Add TODO file
  staging: fsl-dpaa2/eth: Add trace points
  staging: fsl-dpaa2/eth: Add driver specific stats
  staging: fsl-dpaa2/eth: Add ethtool support
  staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver
  ...
2017-05-05 18:16:23 -07:00
Linus Torvalds af82455f7d char/misc patches for 4.12-rc1
Here is the big set of new char/misc driver drivers and features for
 4.12-rc1.
 
 There's lots of new drivers added this time around, new firmware drivers
 from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and
 a bunch of other driver updates.  Nothing major, except if you happen to
 have the hardware for these drivers, and then you will be happy :)
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvAgg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yknsACgzkAeyz16Z97J3UTaeejbR7nKUCAAoKY4WEHY
 8O9f9pr9gj8GMBwxeZQa
 =OIfB
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of new char/misc driver drivers and features for
  4.12-rc1.

  There's lots of new drivers added this time around, new firmware
  drivers from Google, more auxdisplay drivers, extcon drivers, fpga
  drivers, and a bunch of other driver updates. Nothing major, except if
  you happen to have the hardware for these drivers, and then you will
  be happy :)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  firmware: google memconsole: Fix return value check in platform_memconsole_init()
  firmware: Google VPD: Fix return value check in vpd_platform_init()
  goldfish_pipe: fix build warning about using too much stack.
  goldfish_pipe: An implementation of more parallel pipe
  fpga fr br: update supported version numbers
  fpga: region: release FPGA region reference in error path
  fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
  mei: drop the TODO from samples
  firmware: Google VPD sysfs driver
  firmware: Google VPD: import lib_vpd source files
  misc: lkdtm: Add volatile to intentional NULL pointer reference
  eeprom: idt_89hpesx: Add OF device ID table
  misc: ds1682: Add OF device ID table
  misc: tsl2550: Add OF device ID table
  w1: Remove unneeded use of assert() and remove w1_log.h
  w1: Use kernel common min() implementation
  uio_mf624: Align memory regions to page size and set correct offsets
  uio_mf624: Refactor memory info initialization
  uio: Allow handling of non page-aligned memory regions
  hangcheck-timer: Fix typo in comment
  ...
2017-05-04 19:15:35 -07:00
Linus Torvalds d26f552ebb - New Drivers
- Freescale MXS Low Resolution ADC
    - Freescale i.MX23/i.MX28 LRADC touchscreen
    - Motorola CPCAP Power Button
    - TI LMU (Lighting Management Unit)
    - Atmel SMC (Static Memory Controller)
 
  - New Device Support
    - Add support for X-Powers AXP803 to axp20x
    - Add support for Dialog Semi DA9061 to da9062-core
    - Add support for Intel Cougar Mountain to lpc_ich
    - Add support for Intel Gemini Lake to lpc_ich
 
  - New Functionality
    - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
    - Add IRQ sense support; motorola-cpcap
    - Add ACPI support; cros_ec
    - Add Reset support; altera-a10sr
    - Add ADC support; axp20x
    - Add AC Power support; axp20x
    - Add Runtime PM support; atmel-ebi, exynos-lpass
    - Add Battery Power Supply support; axp20x
    - Add Clock support; exynos-lpass, hi655x-pmic
 
  - Fix-ups
    - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
    - Add .remove() method; stm32-timers, exynos-lpass
    - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
    - Rename variables for clarity; axp20x
    - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
    - Improve formatting; arizona-core, axp20x
    - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
    - Simplify/refactor code; arizona-core, atmel-ebi
    - Improve error checking; intel_soc_pmic_core
 
  - Bug Fixes
    - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
    - Correct max-register value; stm32-timers
    - Extend timeout to account for clock stretching; cros_ec_spi
    - Use correct IRQ trigger type; motorola-cpcap
    - Fix bad use of IRQ sense register; motorola-cpcap
    - Logic error "||" should be "&&"; mxs-lradc-ts
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZAdDwAAoJEFGvii+H/HdhViMQAJ7Of3xKiS/P1d7RiOhs2OMY
 41R4GojoY2QSurndIbV/PBUbNMlJiqvIawbFCBz7rAZnIv6NatFQGCQnATci8iDV
 tFxz2m705ifstSQTWUr2ykRdNUdKkShLPHdbjs0ZbpV6Xa5tIXT0U7WpdDr+J51B
 422JHx8tVFrktkYCjg7VASKU9hzz8iRSbdpfu6ZitTT3yrr5Ivl0gaCCmXVyWTsF
 fy8DFvEpsAS1pToXGGeZHueTDIgePyEjwT+By6TuDvkObxvCbVrdhKrJnORfHRKx
 +aidbb4E8/ZNYmRERwl4VkAR7y2tenQat/Si+4rtwYHNTcapjjpdEElQTKkIAUpy
 L5Y9Ai0/ihDXpCPmMnf7omnt3qxAltE4voUk2WUIxDOiaFl6XwyxFPDoy5l8T2IM
 i1akRFss/lov9r3dWzxApTdMNwEdeXnHbZgW60h6RHyCH3dqfN3dFcfu9IX/ua01
 HHI4ltkmaokXJmwvpa+/oVxGAfcoS5AGRw1uRfIN1fbjIxEeRS4I8iogqneVQ5GJ
 D766JIhuf1KKBIWu5DYwfCyTgSdBnEt/J/vTIe4zOZrBk/StbeygWfhUMRSutglK
 eORpwzsX8DnS4SYRErCcRRlePB/NU2GvmHOXSApSem9ifHx8sQGM7QZt2am5JYRp
 q/6gViepBHxrA8Xv6mWJ
 =SHiw
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Freescale MXS Low Resolution ADC
   - Freescale i.MX23/i.MX28 LRADC touchscreen
   - Motorola CPCAP Power Button
   - TI LMU (Lighting Management Unit)
   - Atmel SMC (Static Memory Controller)

  New Device Support:
   - Add support for X-Powers AXP803 to axp20x
   - Add support for Dialog Semi DA9061 to da9062-core
   - Add support for Intel Cougar Mountain to lpc_ich
   - Add support for Intel Gemini Lake to lpc_ich

  New Functionality:
   - Add Device Tree support; wm831x-*, axp20x, ti-lmu, da9062, sun4i-gpadc
   - Add IRQ sense support; motorola-cpcap
   - Add ACPI support; cros_ec
   - Add Reset support; altera-a10sr
   - Add ADC support; axp20x
   - Add AC Power support; axp20x
   - Add Runtime PM support; atmel-ebi, exynos-lpass
   - Add Battery Power Supply support; axp20x
   - Add Clock support; exynos-lpass, hi655x-pmic

  Fix-ups:
   - Implicitly specify required headers; motorola-cpcap, intel_soc_pmic_bxtwc
   - Add .remove() method; stm32-timers, exynos-lpass
   - Remove unused code; intel_soc_pmic_core, intel-lpss-acpi, ipaq-micro, atmel-smc, menelaus
   - Rename variables for clarity; axp20x
   - Convert pr_warning() to pr_warn(); db8500-prcmu, sta2x11-mfd, twl4030-power
   - Improve formatting; arizona-core, axp20x
   - Use raw_spinlock_*() variants; asic3, t7l66xb, tc6393xb
   - Simplify/refactor code; arizona-core, atmel-ebi
   - Improve error checking; intel_soc_pmic_core

  Bug Fixes:
   - Ensure OMAP3630/3730 boards can successfully reboot; twl4030-power
   - Correct max-register value; stm32-timers
   - Extend timeout to account for clock stretching; cros_ec_spi
   - Use correct IRQ trigger type; motorola-cpcap
   - Fix bad use of IRQ sense register; motorola-cpcap
   - Logic error "||" should be "&&"; mxs-lradc-ts"

* tag 'mfd-next-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  input: touchscreen: mxs-lradc: || vs && typos
  dt-bindings: Add AXP803's regulator info
  mfd: axp20x: Support AXP803 variant
  dt-bindings: Add device tree binding for X-Powers AXP803 PMIC
  dt-bindings: Make AXP20X compatible strings one per line
  mfd: intel_soc_pmic_core: Fix unchecked return value
  mfd: menelaus: Remove obsolete local_irq_disable() and local_irq_enable()
  mfd: omap-usb-tll: Configure ULPIAUTOIDLE
  mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
  mfd: palmas: Fixed spelling mistake in error message
  mfd: lpc_ich: Add support for Intel Gemini Lake SoC
  mfd: hi655x: Add the clock cell to provide WiFi and Bluetooth
  mfd: intel_soc_pmic: Fix a mess with compilation units
  mfd: exynos-lpass: Add runtime PM support
  mfd: exynos-lpass: Add missing remove() function
  mfd: exynos-lpass: Add support for clocks
  mfd: exynos-lpass: Remove pad retention control
  iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
  mfd: cpcap: Fix bad use of IRQ sense register
  mfd: cpcap: Use ack_invert interrupts
  ...
2017-05-03 12:16:25 -07:00
Lorenzo Bianconi d3f770582a iio: imu: st_lsm6dsx: add system power management support
Add system sleep power management support to st_lsm6dsx driver.
In particular during suspend phase each sensor is disabled and
hw fifo is configured in bypass in order to avoid subsequent
I/O operations. The patch has been tested on HiKey board device

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-30 17:55:15 +01:00
Lorenzo Bianconi 535de397b2 iio: imu: st_lsm6dsx: modify st_lsm6dsx_flush_fifo and st_lsm6dsx_set_fifo_mode scope
Remove static qualifier from st_lsm6dsx_flush_fifo() and
st_lsm6dsx_set_fifo_mode() in order to use them in system sleep pm support

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-30 17:55:12 +01:00
Sebastian Reichel e530cc8408 iio: isl29028: add isl29030 support
isl29030 is basically the same chip. The only difference
is the chip's first pin. For isl29028 its named ADDR0 and
can be used to change the chip's i2c address. For isl29030
on the other hand that pin is named Ials and is an analog
current output proportional to ALS/IR. This change is
irrelevant for the Linux driver.

This has been tested on Motorola Droid 4.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-30 17:26:04 +01:00
Matt Ranostay 275292d3a3 iio: proximity: as3935: fix AS3935_INT mask
AS3935 interrupt mask has been incorrect so valid lightning events
would never trigger an buffer event. Also noise interrupt should be
BIT(0).

Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
CC: stable@vger.kernel.org
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 16:28:57 +01:00
Quentin Schulz 0e34d5de96 iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the
battery voltage, battery charge and discharge currents, AC-in and VBUS
voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature.

This adds support for most of AXP20X and AXP22X ADCs.

Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:07 +01:00
Matt Ranostay d532e5b2bc iio: proximity: as3935: move storm out of range check
Move out of storm check to apply to IIO_CHAN_INFO_RAW so the reported
results are constant between the former and the IIO_CHAN_INFO_PROCESSED

Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 07:22:46 +01:00
Colin Ian King c894acc7bf iio: hid-sensor: fix return of -EINVAL on invalid values in ret or value
Ensure that when an invalid value in ret or value is found -EINVAL
is returned. A previous commit broke the way the return error is
being returned and instead caused the return code in ret to be
re-assigned rather than be returned.

Fixes: 5d9854eaea ("iio: hid-sensor: Store restore poll and hysteresis on S3")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 07:16:45 +01:00
Orson Zhai 1016d56765 iio: core: Fix suspicious sizeof usage
Pointer size is variours in different system, say 32bit for 4 and 64bit
for 8. The 'sizeof(infomask)' may lead to wrong bit numbers.

Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 06:30:52 +01:00
Marek Vasut 1a732f4211 iio: adc: rcar-gyroadc: Derive interface clock speed from fck clock
The "if" interface clock speed is actually derived from the "fck"
block clock, as in the hardware they are the same clock. Drop the
incorrect second "if" clock and get the clock speed from "fck".

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: linux-renesas-soc@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 05:58:03 +01:00
Dan Carpenter 35fa70dfd6 iio: adc: Max9611: checking for ERR_PTR instead of NULL in probe
devm_iio_device_alloc() doesn't return ERR_PTRs, it returns NULLs.

Fixes: 69780a3bbc ("iio: adc: Add Maxim max9611 ADC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-26 07:24:48 +01:00
Matt Ranostay 6272c0de13 iio: proximity: as3935: recalibrate RCO after resume
According to the datasheet the RCO must be recalibrated
on every power-on-reset. Also remove mutex locking in the
calibration function since callers other than the probe
function (which doesn't need it) will have a lock.

Fixes: 24ddb0e4bb ("iio: Add AS3935 lightning sensor support")
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-26 07:06:31 +01:00