There are a few calls of usb_driver_claim_interface() but all of those
miss the proper error checks, as reported by Coverity. This patch
adds those missing checks.
Along with it, replace the magic pointer with -1 with a constant
USB_AUDIO_IFACE_UNUSED for better readability.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1475943 ("Error handling issues")
Addresses-Coverity-ID: 1475944 ("Error handling issues")
Addresses-Coverity-ID: 1475945 ("Error handling issues")
Fixes: b1ce7ba619 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once")
Fixes: e5779998bf ("ALSA: usb-audio: refactor code")
Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook
Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a control to the card before copying the id so that the numid field
is initialized in the copy. Otherwise the numid field of active_id,
format_id, rate_id and channels_id will be the same (0) and
snd_ctl_notify() will not queue the events properly.
Signed-off-by: Jonas Holmberg <jonashg@axis.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210407075428.2666787-1-jonashg@axis.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.corp-partner.google.com>:
From: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.corp-partner.google.com>
Hi all,
This patch series about creating dailink for Wake on voice functionality
and also adding MST route changes.
changes in v3:
-Remove DP from widgets
-Add MST support in other routing table for kbl_rt5663_max98927.c
v2 is here:
https://patchwork.kernel.org/project/alsa-devel/cover/20210325174325.31802-1-vamshi.krishna.gopal@intel.com/
v1 is here:
https://patchwork.kernel.org/project/alsa-devel/cover/20210324175200.44922-1-vamshi.krishna.gopal@intel.com/
Mac Chiang (1):
ASoc: Intel: board: add BE DAI link for WoV
Vamshi Krishna Gopal (1):
ASoC: Intel: kbl: Add MST route change to kbl machine drivers
sound/soc/intel/boards/kbl_da7219_max98357a.c | 58 +++++++++++++++++--
sound/soc/intel/boards/kbl_da7219_max98927.c | 10 ++--
sound/soc/intel/boards/kbl_rt5663_max98927.c | 14 +++--
3 files changed, 70 insertions(+), 12 deletions(-)
--
2.17.1
create dai link in kbl_da7219_max98357a driver for wake on voice
functionality.
changes picked from broonie's tree
commit 0c7941a63a
("ASoC: Intel: Skylake: Use refcap device for mono recording")
commit 2154be362c
("ASoc: Intel: boards: Add WOV as sink for nau88l25_ssm4567 machine")
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Tested-by: Kaiyen Chang <kaiyen.chang@intel.corp-partner.google.com>
Tested-by: luke yang <luke_yang@compal.corp-partner.google.com>
Tested-by: Grace Kao <grace.kao@intel.com>
Tested-by: Kaiyen Chang <kaiyen.chang@intel.com>
Reviewed-by: Cheng-Yi Chiang <cychiang@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210405124835.71247-3-vamshi.krishna.gopal@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support MST hdmi audio, modify the current routes to be
based on port in kbl_da7219_max98357a, kbl_da7219_max98927 &
kbl_rt5663_max98927.
Signed-off-by: Vamshi Krishna Gopal <vamshi.krishna.gopal@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210405124835.71247-2-vamshi.krishna.gopal@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clock registration must be performed before the component is
registered. aic32x4_component_probe attempts to get all the
clocks right off the bat. If the component is registered before
the clocks there is a race condition where the clocks may not
be registered by the time aic32x4_componet_probe actually runs.
Fixes: d1c859d314 ("ASoC: codec: tlv3204: Increased maximum supported channels")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/0101017889850206-dcac4cce-8cc8-4a21-80e9-4e4bef44b981-000000@us-west-2.amazonses.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If count is 16 then this will put the NUL terminator one element beyond
the end of the array.
Fixes: cb17fe0045 ("ALSA: control - add sysfs support to the LED trigger module")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/YGcDOtrimR46vr0k@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the card.components string using the new rt5670_components() helper
which returns a components string based on the DMI quirks inside the
rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5670 codec driver uses DMI quirks to configure the DMIC data-pins,
which means that it knows which DMIC interface is used on a specific
device.
ATM we duplicate this DMI matching inside the UCM profiles to select
the right DMIC interface. Add a rt5670_components() helper which the
machine-driver can use to set the components string of the card so
that UCM can get the info from the components string.
This way we only need to add new DMI quirks in one place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a quirk with the jack-detect and dmic settings necessary to make
jack-detect and the builtin mic work on Dell Venue 10 Pro 5055 tablets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5672 codec is used on some Bay Trail CR boards, on these SoCs SSP2
is not available and SSP0 should be used instead. At support for this.
This has been tested on a Dell Venue 10 Pro 5055.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Dell Venue 10 Pro 5055 tablet uses an ACPI HID of 10EC5640 while using
a rt5672 codec (instead of a rt5640 codec). Add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to have separate quirk-handlers / byt_machine_id-s
for these.
These are both cases of BYT devices with a 10EC5640 ACPI HID while using
a rt5672 codec.
The Dell Venue 10 Pro 5055 is another example of such a device, instead
of adding a third byt_machine_id definition for this Dell model, make
change the 2 existing cases into a generic BYT_RT5672 byt_machine_id
in preparation for adding a quirk for the Dell Venue 10 Pro 5055.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210402140747.174716-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Things seem calming down, only usual device-specific fixes for
HD-audio and USB-audio at this time.
-----BEGIN PGP SIGNATURE-----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=TYaf
-----END PGP SIGNATURE-----
Merge tag 'sound-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things seem calming down, only usual device-specific fixes for
HD-audio and USB-audio at this time"
* tag 'sound-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: fix mute/micmute LEDs for HP 640 G8
ALSA: hda: Add missing sanity checks in PM prepare/complete callbacks
ALSA: hda: Re-add dropped snd_poewr_change_state() calls
ALSA: usb-audio: Apply sample rate quirk to Logitech Connect
ALSA: hda/realtek: call alc_update_headset_mode() in hp_automute_hook
ALSA: hda/realtek: fix a determine_headset_type issue for a Dell AIO
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: af3d54b997 ("ASoC: codecs: lpass-rx-macro: add support for lpass rx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
NPL clock rate is twice the MCLK rate, so set this correctly to
avoid soundwire timeouts.
Fixes: c39667ddcf ("ASoC: codecs: lpass-tx-macro: add support for lpass tx macro")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210331171235.24824-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are the last two patches in the cleanups, this time I am not
sure what the code does and what the proper fix might be. Feedback
welcome.
Pierre-Louis Bossart (2):
ASoC: lm49453: fix useless assignment before return
ASoC: da732x: simplify code
sound/soc/codecs/da732x.c | 17 ++++++-----------
sound/soc/codecs/da732x.h | 12 ++++--------
sound/soc/codecs/lm49453.c | 2 --
3 files changed, 10 insertions(+), 21 deletions(-)
--
2.25.1
Hi Mark
These are small clanup patches for soc-core.
[1/2] patch adds missing explanation, and
[2/2] patch fixup error handling of rtd.
Kuninori Morimoto (2):
ASoC: soc-core: add comment for rtd freeing
ASoC: soc-core: use device_unregister() if rtd allocation failed
sound/soc/soc-core.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--
2.25.1
It may be possible that the string pointer does not move
when parsing. Add a code which detects this state and
simply break the parser loop in this case.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210331180725.663623-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
cppcheck warning:
sound/soc/ti/omap-mcbsp.c:379:11: style: The if condition is the same
as the previous if condition [duplicateCondition]
if (mcbsp->irq) {
^
sound/soc/ti/omap-mcbsp.c:376:11: note: First condition
if (mcbsp->irq)
^
sound/soc/ti/omap-mcbsp.c:379:11: note: Second condition
if (mcbsp->irq) {
^
Keeping two separate tests was probably intentional for clarity, but
since this generates warnings we might as well make cppcheck happy so
that we have fewer warnings.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210326215927.936377-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/ti/omap-abe-twl6040.c:173:10: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20210326215927.936377-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/tegra/tegra20_das.c:64:60: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
reg = otherdap << TEGRA20_DAS_DAP_CTRL_SEL_DAP_CTRL_SEL_P |
^
sound/soc/tegra/tegra20_das.c:65:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
!!sdata2rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA2_TX_RX_P |
^
sound/soc/tegra/tegra20_das.c:66:61: style: Boolean result is used in
bitwise operation. Clarify expression with
parentheses. [clarifyCondition]
!!sdata1rx << TEGRA20_DAS_DAP_CTRL_SEL_DAP_SDATA1_TX_RX_P |
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210326215927.936377-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/stm/stm32_adfsdm.c:120:2: warning: %d in format
string (no. 1) requires 'int' but the argument type is 'unsigned
int'. [invalidPrintfArgType_sint]
snprintf(str_freq, sizeof(str_freq), "%d\n", freq);
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/sti/sti_uniperif.c:490:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(&pdev->dev,
^
sound/soc/sti/sti_uniperif.c:486:6: note: ret is assigned
ret = sti_uniperiph_cpu_dai_of(node, priv);
^
sound/soc/sti/sti_uniperif.c:490:6: note: ret is overwritten
ret = devm_snd_soc_register_component(&pdev->dev,
^
sti_uniperiph_cpu_dai_of() can return -EINVAL which seems like a
good-enough reason to bail.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210326215927.936377-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/pxa/mmp-pcm.c:207:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0, stream;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains about potential null pointer dereference but it's
rather an unnecessary assignment to NULL before walking through a
list.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck complains about potential null pointer dereference but it's
rather an unnecessary assignment to NULL before walking through a
list.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/bcm/cygnus-ssp.c:1364:6: style: Redundant initialization for
'err'. The initialized value is overwritten before it is
read. [redundantInitialization]
err = devm_snd_soc_register_component(dev, &cygnus_ssp_component,
^
sound/soc/bcm/cygnus-ssp.c:1313:10: note: err is initialized
int err = -EINVAL;
^
sound/soc/bcm/cygnus-ssp.c:1364:6: note: err is overwritten
err = devm_snd_soc_register_component(dev, &cygnus_ssp_component,
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/amd/renoir/acp3x-pdm-dma.c:132:17: style: Variable
'pdm_dma_enable' is assigned a value that is never
used. [unreadVariable]
pdm_dma_enable = 0x00;
^
sound/soc/amd/renoir/acp3x-pdm-dma.c:156:18: style: Variable
'pdm_dma_enable' is assigned a value that is never
used. [unreadVariable]
pdm_dma_enable = 0x00;
^
indeed those values are never used because the timeout is reset.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326215927.936377-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because soc_free_pcm_runtime(rtd) checks rtd pointer and freeing
rtd->xxx, it doesn't work correctly in case of rtd allocation failed.
We need to use device_unregister(dev) in such case.
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1jxxldd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to mind freeing for rtd,
because it was created from devm_kzalloc(dev, xxx) which is rtd->dev.
This means, if rtd->dev was freed, rtd will be also freed
automatically.
soc_new_pcm_runtime(...)
{
...
rtd = devm_kzalloc(dev, ...);
rtd->dev = dev;
...
}
This explanation was missing at soc_free_pcm_runtime() comment.
This patch indicates it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sg4dxldn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck reports a false positive:
sound/soc/codecs/da732x.c:1161:25: warning: Either the condition
'indiv<0' is redundant or there is division by zero at line
1161. [zerodivcond]
fref = (da732x->sysclk / indiv);
^
sound/soc/codecs/da732x.c:1158:12: note: Assuming that condition
'indiv<0' is not redundant
if (indiv < 0)
^
sound/soc/codecs/da732x.c:1161:25: note: Division by zero
fref = (da732x->sysclk / indiv);
^
The code is awfully convoluted/confusing and can be simplified with a
single variable and the BIT macro.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326221619.949961-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/codecs/lm49453.c:1210:11: style: Variable 'pll_clk' is
assigned a value that is never used. [unreadVariable]
pll_clk = BIT(4);
^
FIXME: What is the correct fix?
/* fll clk slection */
pll_clk = BIT(4);
return 0;
is the assignment redundant or the 'return 0' a mistake?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210326221619.949961-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
card->owner is a required property and since commit 81033c6b58 ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2a ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ff ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0 ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBkoFEACgkQJNaLcl1U
h9BqTgf5AUfR5NbQgJIUMtdMsuz+bthKGuPnpYhYzNUH0io9i3Sjpt0Mbw21dLp2
nXW+70BH0tJZBGR4DNGpmcpBLH5WPdOR9WIv4vCYy9Pr0uCGGKF/JkGeZAg7/llF
C3+yDfTnF0AvR+74xbf/LTjBPGja/08PED1ZC00NAkLhE3C0Pa/VQ0NaEtPUULWE
ZOWboF7hfQUeGzGPTqNp4Cy0/Pzokk6Fvl4kgfrxjNWO7ojIv9mCAvmYbusLW7NU
3Ph5VGsIuyMeorEoAVOFaBY2nrYG/mFZyzTNWJMgvF1MdeigMPNfbbffrUK0sn6k
e81zgWbwxboEujQ91/EZU7glIqtb6A==
=rr4V
-----END PGP SIGNATURE-----
Merge tag 'mute-led-rework' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-5.13
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi Mark
I want to add new audio-graph-card2 driver which can support
not only DPCM, but also Multi-CPU/Codec, and Codec2Codec.
And it is also supporting user customization.
But before supporting such driver, we need to cleanup existing
simple-card / audio-graph, because these and new driver are
sharing code.
This patch-set are cleanup and prepare for Multi-CPU/Codec support.
Kuninori Morimoto (6):
ASoC: simple-card-utils.c: remove old comment
ASoC: simple-card-utils: alloc dai_link information for CPU/Codec/Platform
ASoC: audio-graph: count DAI / link numbers as in order
ASoC: audio-graph: cleanup graph_for_each_link()
ASoC: simple-card: count DAI / link numbers as in order
ASoC: simple-card: cleanup graph_for_each_link()
include/sound/simple_card_utils.h | 7 +-
sound/soc/generic/audio-graph-card.c | 112 +++++++++++++------------
sound/soc/generic/simple-card-utils.c | 20 +++--
sound/soc/generic/simple-card.c | 115 +++++++++++++++-----------
4 files changed, 143 insertions(+), 111 deletions(-)
--
2.25.1
The SoC sound core will generate a driver name by normalizing the card
name. However, most of the time that name does not tell anything about
the driver and is therefore useless for this purpose.
Make the driver name more useful by setting it explicitly during card
initialization.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210330180657.1867971-1-thierry.reding@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Chuwi Hi8 tablet is using an analog mic on IN1 and has its
jack-detect connected to JD2_IN4N, instead of using the default
IN3 for its internal mic and JD1_IN4P for jack-detect.
It also only has 1 speaker.
Add a quirk applying the correct settings for this configuration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210325221054.22714-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times.
Because of this kind of complex background, it needs to use local
varuable for it, and each call-back functions need to care about it.
Now, 1st and 2nd DT link check are using same order,
thus we can share same code. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875z1e1tov.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times at 2nd DT link check.
But it doesn't do it at 1st DT link check.
for (li.cpu = 1; li.cpu >= 0; li.cpu--) {
/*
* Detect all CPU first, and Detect all Codec 2n
*
* In Normal sound case, all DAIs are detected
* as "CPU-Codec".
*
* In DPCM sound case,
* all CPUs are detected as "CPU-dummy", and
* all Codecs are detected as "dummy-Codec".
* To avoid random sub-device numbering,
* detect "dummy-Codec" in last;
*/
ret = simple_for_each_link(...);
...
}
To prepare supporting multi-CPU/Codec, and code cleanup,
this patch use same loop for 1st DT link check, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dlu1tp2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times.
Because of this kind of complex background, it needs to use local
varuable for it, and each call-back functions need to care about it.
Now, 1st and 2nd DT link check are using same order,
thus we can share same code. This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s6a1tpf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph checks DT links 2 times. 1st is for counting DAIs / links
to allocating memory, 2nd is for detecting DAIs.
To detecting DAIs as CPU-dummy -> dummy-Codec order when DPCM case,
it uses loops 2 times at 2nd DT link check.
But it doesn't do it at 1st DT link check.
for (li.cpu = 1; li.cpu >= 0; li.cpu--) {
/*
* Detect all CPU first, and Detect all Codec 2n
*
* In Normal sound case, all DAIs are detected
* as "CPU-Codec".
*
* In DPCM sound case,
* all CPUs are detected as "CPU-dummy", and
* all Codecs are detected as "dummy-Codec".
* To avoid random sub-device numbering,
* detect "dummy-Codec" in last;
*/
ret = graph_for_each_link(...);
...
}
To prepare supporting multi-CPU/Codec, and code cleanup,
this patch use same loop for 1st DT link check, too.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6qq1tpp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card / audio-graph are assuming single CPU/Codec/Platform on
dai_link. Because of it, it is difficult to support Multi-CPU/Codec.
This patch allocs CPU/Codec/Platform dai_link imformation
instead of using existing props information. It can update to
multi-CPU/Codec, but is still assuming single-CPU/Codec for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blb61tpv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit adb76b5b9c ("ASoC: soc-core: remove legacy style dai_link")
removed snd_soc_init_multicodec(). The comment on asoc_simple_init_priv()
is no longer needed. This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czvm1tq2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=1uM7
-----END PGP SIGNATURE-----
Merge tag 'tags/mute-led-rework' into for-next
ALSA: control - add generic LED API
This patchset tries to resolve the diversity in the audio LED
control among the ALSA drivers. A new control layer registration
is introduced which allows to run additional operations on
top of the elementary ALSA sound controls.
A new control access group (three bits in the access flags)
was introduced to carry the LED group information for
the sound controls. The low-level sound drivers can just
mark those controls using this access group. This information
is not exported to the user space, but user space can
manage the LED sound control associations through sysfs
(last patch) per Mark's request. It makes things fully
configurable in the kernel and user space (UCM).
The actual state ('route') evaluation is really easy
(the minimal value check for all channels / controls / cards).
If there's more complicated logic for a given hardware,
the card driver may eventually export a new read-only
sound control for the LED group and do the logic itself.
The new LED trigger control code is completely separated
and possibly optional (there's no symbol dependency).
The full code separation allows eventually to move this
LED trigger control to the user space in future.
Actually it replaces the already present functionality
in the kernel space (HDA drivers) and allows a quick adoption
for the recent hardware (ASoC codecs including SoundWire).
snd_ctl_led 24576 0
The sound driver implementation is really easy:
1) call snd_ctl_led_request() when control LED layer should be
automatically activated
/ it calls module_request("snd-ctl-led") on demand /
2) mark all related kcontrols with
SNDRV_CTL_ELEM_ACCESS_SPK_LED or
SNDRV_CTL_ELEM_ACCESS_MIC_LED
Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to manage the kcontrol entries association for the LED trigger
from the user space. This patch adds a layer to the sysfs tree like:
/sys/devices/virtual/sound/ctl-led/mic
+ card0
| + attach
| + detach
| ...
+ card1
+ attach
...
Operations:
attach and detach
- amixer style ID is accepted and easy strings for numid and
simple names
reset
- reset all associated kcontrol entries
list
- list associated kcontrol entries (numid values only)
Additional symlinks:
/sys/devices/virtual/sound/ctl-led/mic/card0/card ->
/sys/class/sound/card0
/sys/class/sound/card0/controlC0/led-mic ->
/sys/devices/virtual/sound/ctl-led/mic/card0
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-7-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Create SYSFS/devices/virtual/sound/ctl-led tree
(with SYSFS/class/sound/ctl-led symlink).
speaker/
+-- mode
+-- brightness
mic/
+-- mode
+-- brightness
Copy the idea from the HDA driver and allow to set the audio
LEDs based on the various modes:
- follow mute
- follow moute (inverted to follow mute)
- off
- on
Also, the actual LED state is exposed.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-6-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With the new snd-ctl-led module, we have a generic way
to trigger audio LEDs based on the sound control changes.
Remove the custom implementation from the HDA driver.
Move the LED initialization before snd_hda_gen_parse_auto_config()
call in all drivers to create marked controls there.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-5-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent laptops have usually two LEDs assigned to reflect
the speaker and microphone mute state. This implementation
adds a tiny layer on top of the control API which calculates
the state for those LEDs using the driver callbacks.
Two new access flags are introduced to describe the controls
which affects the audio path settings (an easy code change
for drivers).
The LED resource can be shared with multiple sound cards with
this code. The user space controls may be added to the state
chain on demand, too.
This code should replace the LED code in the HDA driver and
add a possibility to easy extend the other drivers (ASoC
codecs etc.).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-4-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The layer registration allows to handle an extra functionality
on top of the control API. It can be used for the audio
LED control for example.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-3-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This helper is required for the following generic LED mute
patch. The helper also simplifies some other functions.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20210317172945.842280-2-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
modification in commit 2a3f7221ac ("ALSA: core: Fix card races between
register and disconnect") resulting in this problem.
Fixes: 2a3f7221ac ("ALSA: core: Fix card races between register and disconnect")
Signed-off-by: Jia Zhou <zhou.jia2@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP EliteBook 640 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210330114428.40490-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Q6afe-clocks driver can get reprobed. For example if the APR services
are restarted after the firmware crash. However currently Q6afe-clocks
driver will oops because hw.init will get cleared during first _probe
call. Rewrite the driver to fill the clock data at runtime rather than
using big static array of clocks.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Fixes: 520a1c396d ("ASoC: q6afe-clocks: add q6afe clock controller")
Link: https://lore.kernel.org/r/20210327092857.3073879-1-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The recently added PM prepare and complete callbacks don't have the
sanity check whether the card instance has been properly initialized,
which may potentially lead to Oops.
This patch adds the azx_is_pm_ready() call in each place
appropriately like other PM callbacks.
Fixes: f5dac54d9d ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The card power state change via snd_power_change_state() at the system
suspend/resume seems dropped mistakenly during the PM code rewrite.
The card power state doesn't play much role nowadays but it's still
referred in a few places such as the HDMI codec driver.
This patch restores them, but in a more appropriate place now in the
prepare and complete callbacks.
Fixes: f5dac54d9d ("ALSA: hda: Separate runtime and system suspend")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210329113059.25035-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a function to find a match between pcm hw params and SSP
DAI config. Config is matched against sample rate and if match is found
current config is set. If match isn't found last matched config is left
as current i.e. current config is not touched. Functionality for SSP
DAIs with 1 config remains the same as before.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SSP DAIs don't have hw params callback function as there
wasn't anything to setup after initial topology loading. After enabling
multiple DAI configs the current config can be sent in the callback.
This patch changes the way SSP config ipc is sent to the dsp. Before it
was only sent once in topology loading, but now it will be additionally
sent always when stream is opened. Mechanism is similar as with HDA
DAIs.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC parses multiple hw_configs defined in topology. However currently
in SOF only the first config is used and others are discarded. First
change SOF driver to parse and save possible multiple configs in ssp
case. Also save the default config value provided by ASoC. Functionality
with only one defined config stays the same.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210326165150.255533-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the following sparse warnings:
sound/soc/fsl/fsl_rpmsg.c:45:45: sparse: sparse: Using plain integer as NULL pointer
sound/soc/fsl/fsl_rpmsg.c:45:56: sparse: sparse: Using plain integer as NULL pointer
Fixes: b73d9e6225 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/1616988868-971-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix ACPI dependency kernel warning produced by powerpc
allyesconfig.
sound/soc/amd/acp-da7219-max98357a.c:684:28: warning:
'cz_rt5682_card' defined but not used [-Wunused-variable]
sound/soc/amd/acp-da7219-max98357a.c:671:28: warning: 'cz_card'
defined but not used [-Wunused-variable]
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/1616777074-5151-2-git-send-email-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
while CONFIG_SND_DESIGNWARE_PCM is not set, building with W=1 shows this:
sound/soc/dwc/local.h:127:6: warning: no previous prototype for ‘dw_pcm_push_tx’ [-Wmissing-prototypes]
void dw_pcm_push_tx(struct dw_i2s_dev *dev) { }
^~~~~~~~~~~~~~
sound/soc/dwc/local.h:128:6: warning: no previous prototype for ‘dw_pcm_pop_rx’ [-Wmissing-prototypes]
void dw_pcm_pop_rx(struct dw_i2s_dev *dev) { }
^~~~~~~~~~~~~
sound/soc/dwc/local.h:129:5: warning: no previous prototype for ‘dw_pcm_register’ [-Wmissing-prototypes]
int dw_pcm_register(struct platform_device *pdev)
^~~~~~~~~~~~~~~
Change these to inline functions to fix the warnings.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210329150524.18184-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Function "for_each_available_child_of_node" should have of_node_put()
before return around line 1352.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
CC: Sumera Priyadarsini <sylphrenadin@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2103281651320.2854@hadrien
Signed-off-by: Mark Brown <broonie@kernel.org>
Logitech ConferenceCam Connect is a compound USB device with UVC and
UAC. Not 100% reproducible but sometimes it keeps responding STALL to
every control transfer once it receives get_freq request.
This patch adds 046d:0x084c to a snd_usb_get_sample_rate_quirk list.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203419
Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210324105153.2322881-1-ikjn@chromium.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rear Mic on Lenovo P620 cannot record after S3, despite that there's no
error and the other two functions of the USB audio, Line In and Line
Out, work just fine.
The mic starts to work again after running userspace app like "alsactl
store". Following the lead, the evidence shows that as soon as connector
status is queried, the mic can work again.
So also check connector value on resume to "wake up" the USB audio to
make it functional.
This can be device specific, however I think this generic approach may
benefit more than one device.
Now the resume callback checks connector, and a new callback,
reset_resume, to also restore switches and volumes.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210325165918.22593-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Asymmetric multiprocessor, there is Cortex-A core and Cortex-M core,
Linux is running on A core, RTOS is running on M core.
The audio hardware device can be controlled by Cortex-M device,
So audio playback/capture can be handled by M core.
Rpmsg is the interface for sending and receiving msg to and from M
core, that we can create a virtual sound on Cortex-A core side.
A core will tell the Cortex-M core sound format/rate/channel,
where is the data buffer, what is the period size, when to start,
when to stop and when suspend or resume happen, each of this behavior
there is defined rpmsg command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wakeup to fill data.
changes in v5:
- remove unneeded property in binding doc and driver
- update binding doc according to Rob's comments.
- Fix link issue reported by kernel test robot
changes in v4:
- remove the sound card node, merge the property to cpu dai node
according to Rob's comments.
- sound card device will be registered by cpu dai driver.
- Fix do_div issue reported by kernel test robot
changes in v3:
- add local refcount for clk enablement in hw_params()
- update the document according Rob's comments
changes in v2:
- update codes and comments according to Mark's comments
Shengjiu Wang (6):
ASoC: soc-component: Add snd_soc_pcm_component_ack
ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg
ASoC: dt-bindings: fsl_rpmsg: Add binding doc for rpmsg audio device
ASoC: imx-audio-rpmsg: Add rpmsg_driver for audio channel
ASoC: imx-pcm-rpmsg: Add platform driver for audio base on rpmsg
ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg
.../devicetree/bindings/sound/fsl,rpmsg.yaml | 108 +++
include/sound/soc-component.h | 3 +
sound/soc/fsl/Kconfig | 30 +
sound/soc/fsl/Makefile | 6 +
sound/soc/fsl/fsl_rpmsg.c | 279 ++++++
sound/soc/fsl/fsl_rpmsg.h | 35 +
sound/soc/fsl/imx-audio-rpmsg.c | 140 +++
sound/soc/fsl/imx-pcm-rpmsg.c | 918 ++++++++++++++++++
sound/soc/fsl/imx-pcm-rpmsg.h | 512 ++++++++++
sound/soc/fsl/imx-rpmsg.c | 150 +++
sound/soc/soc-component.c | 14 +
sound/soc/soc-pcm.c | 2 +
12 files changed, 2197 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
create mode 100644 sound/soc/fsl/fsl_rpmsg.c
create mode 100644 sound/soc/fsl/fsl_rpmsg.h
create mode 100644 sound/soc/fsl/imx-audio-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.c
create mode 100644 sound/soc/fsl/imx-pcm-rpmsg.h
create mode 100644 sound/soc/fsl/imx-rpmsg.c
--
2.27.0
0x20FF(amp global enable) register was defined as non-volatile,
but it is not. Overheating, overcurrent can cause amp shutdown
in hardware.
'regmap_write' compare register readback value before writing
to avoid same value writing. 'regmap_read' just read cache
not actual hardware value for the non-volatile register.
When amp is internally shutdown by some reason, next 'AMP ON'
command can be ignored because regmap think amp is already ON.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-1-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The call sequence in wm8960_configure_clocking is
ret = wm8960_configure_sysclk();
if (ret >= 0)
goto configure_clock;
....
ret = wm8960_configure_pll();
configure_clock:
...
wm8960_configure_sysclk is called before wm8960_configure_pll, as
there is bitclk relax on both functions, so wm8960_configure_sysclk
always return success, then wm8960_configure_pll() never be called.
With this case:
aplay -Dhw:0,0 -d 5 -r 48000 -f S24_LE -c 2 audio48k24b2c.wav
the required bitclk is 48000 * 24 * 2 = 2304000, bitclk got from
wm8960_configure_sysclk is 3072000, but if go to wm8960_configure_pll.
it can get correct bitclk 2304000.
So bitclk relax condition should be removed in wm8960_configure_sysclk,
then wm8960_configure_pll can be called, and there is also bitclk relax
function in wm8960_configure_pll.
Fixes: 3c01b9ee2a ("ASoC: codec: wm8960: Relax bit clock computation")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1614740862-30196-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
3 new controls are added.
"OVC Autorestart Switch" : controls whether or not the speaker amplifier
automatically re-enables after an overcurrent fault condition.
"THERM Autorestart Switch" : controls whether or not the device
automatically resumes playback when the die temperature recovers from
thermal shutdown.
"CMON Autorestart Switch" : controls whether or not the device
automatically resumes playback when the clock returns after stopping.
Above Auto Restart functions are enabled by default.
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Link: https://lore.kernel.org/r/20210325033555.29377-3-ryans.lee@maximintegrated.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The platform device is not registered by device tree or
cpu dai driver, it is registered by the rpmsg channel,
So add a dedicated machine driver to handle this case.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform driver based on rpmsg is the interface for sending and
receiving rpmsg to and from M core. It will tell the Cortex-M core
sound format/rate/channel, where is the data buffer, where is
the period size, when to start, when to stop and when suspend
or resume happen, each this behavior there is defined rpmsg
command.
Especially we designed the low power audio case, that is to
allocate a large buffer and fill the data, then Cortex-A core can go
to sleep mode, Cortex-M core continue to play the sound, when the
buffer is consumed, Cortex-M core will trigger the Cortex-A core to
wake up.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is used to accept the message from rpmsg audio
channel, and if this driver is probed, it will help to register
the platform driver, the platform driver will use this
audio channel to send and receive messages to and from Cortex-M
core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is a cpu dai driver for rpmsg audio use case,
which is mainly used for getting the user's configuration
from devicetree and configure the clocks which is used by
Cortex-M core.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add snd_soc_pcm_component_ack back, which can be used to get an
updated buffer pointer in the platform driver.
On Asymmetric multiprocessor, this pointer can be sent to Cortex-M
core for audio processing.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1615516725-4975-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Increase the device select range to 4 on platforms supporting
4 concurrent displays.
This fixes a problem in scenario where total of 4 displays are active,
and 3 of these are audio capable DP receivers and connected to a DP-MST
hub. Due to incorrect range for device select, audio could not be played
to the 3rd monitor in DP-MST hub.
BugLink: https://github.com/thesofproject/linux/issues/2798
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210324172337.51730-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi All,
Here is v4 of my series to rework the arizona codec jack-detect support
to use the snd_soc_jack helpers instead of direct extcon reporting.
As discussed before here is a resend rebased on 5.12-rc2, making sure that
all patches this depends on are in place.
Lee, can you pick-up patches 1-6 through the MFD tree and then send a
pull-req to Mark so that Mark can merge the Asoc parts throught the ASoC
tree ?
Patches 2-6 touch drivers/extcon, these all have an Ack from Chanwoo Choi
for merging these through the MFD tree.
Here is some more generic info on this series from the previous
cover-letter:
This is done by reworking the extcon driver into an arizona-jackdet
library and then modifying the codec drivers to use that directly,
replacing the old separate extcon child-devices and extcon-driver.
This brings the arizona-codec jack-detect handling inline with how
all other ASoC codec driver do this. This was developed and tested on
a Lenovo Yoga Tablet 1051L with a WM5102 codec.
This was also tested by Charles Keepax, one of the Cirrus Codec folks.
Regards,
Hans
Hans de Goede (13):
mfd: arizona: Drop arizona-extcon cells
extcon: arizona: Fix some issues when HPDET IRQ fires after the jack
has been unplugged
extcon: arizona: Fix various races on driver unbind
extcon: arizona: Fix flags parameter to the gpiod_get("wlf,micd-pol")
call
extcon: arizona: Always use pm_runtime_get_sync() when we need the
device to be awake
ASoC/extcon: arizona: Move arizona jack code to
sound/soc/codecs/arizona-jack.c
ASoC: arizona-jack: Move jack-detect variables to struct arizona_priv
ASoC: arizona-jack: Use arizona->dev for runtime-pm
ASoC: arizona-jack: convert into a helper library for codec drivers
ASoC: arizona-jack: Use snd_soc_jack to report jack events
ASoC: arizona-jack: Cleanup logging
ASoC: arizona: Make the wm5102, wm5110, wm8997 and wm8998 drivers use
the new jack library
ASoC: Intel: bytcr_wm5102: Add jack detect support
MAINTAINERS | 3 +-
drivers/extcon/Kconfig | 8 -
drivers/extcon/Makefile | 1 -
drivers/mfd/arizona-core.c | 20 -
sound/soc/codecs/Makefile | 2 +-
.../soc/codecs/arizona-jack.c | 577 +++++++-----------
sound/soc/codecs/arizona.h | 44 ++
sound/soc/codecs/wm5102.c | 12 +-
sound/soc/codecs/wm5110.c | 12 +-
sound/soc/codecs/wm8997.c | 14 +-
sound/soc/codecs/wm8998.c | 9 +
sound/soc/intel/boards/bytcr_wm5102.c | 28 +-
12 files changed, 325 insertions(+), 405 deletions(-)
rename drivers/extcon/extcon-arizona.c => sound/soc/codecs/arizona-jack.c (76%)
--
2.30.1
Add jack detect support by creating a jack and calling
snd_soc_component_set_jack to register the created jack
with the codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-14-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make all arizona codec drivers for which drivers/mfd/arizona-core.c used
to instantiate a "arizona-extcon" child-device use the new arizona-jack.c
library for jack-detection.
This has been tested on a Lenovo Yoga Tablet 2 1051L with a WM5102 codec.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-13-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cleanup the use of dev_foo functions used for logging:
1. Many of these are unnecessarily split over multiple lines
2. Use dev_err_probe() in cases where we might get a -EPROBE_DEFER
return value
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-12-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the snd_soc_jack code to report jack events, instead of using extcon
for reporting the cable-type + an input_dev for reporting the button
presses.
The snd_soc_jack code will report the cable-type through both input_dev
events and through ALSA controls and the button-presses through input_dev
events.
Note that this means that when the codec drivers are moved over to use
the new arizona-jack.c library code instead of having a separate MFD
extcon cell with the extcon-arizona.c driver, we will no longer report
extcon events to userspace for cable-type changes. This should not be
a problem since "standard" Linux distro userspace does not (and has
never) used the extcon class interface for this. Android does have
support for the extcon class interface, but that was introduced in
the same release as support for input_dev cable-type events, so this
should not be a problem for Android either.
Note this also reduces ARIZONA_MAX_MICD_RANGE from 8 to 6, this is
ok to do since this info is always provided through pdata (or defaults)
and cannot be overridden from devicetree. All in-kernel users of the
pdata (and the fallback defaults) define 6 or less buttons/ranges.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-11-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the arizona extcon driver into a helper library for direct use
from the arizona codec-drivers, rather then being bound to a separate
MFD cell.
Note the probe (and remove) sequence is split into 2 parts:
1. The arizona_jack_codec_dev_probe() function inits a bunch of
jack-detect specific variables in struct arizona_priv and tries to get
a number of resources where getting them may fail with -EPROBE_DEFER.
2. Then once the machine driver has create a snd_sock_jack through
snd_soc_card_jack_new() it calls snd_soc_component_set_jack() on
the codec component, which will call the new arizona_jack_set_jack(),
which sets up jack-detection and requests the IRQs.
This split is necessary, because the IRQ handlers need access to the
arizona->dapm pointer and the snd_sock_jack which are not available
when the codec-driver's probe function runs.
Note this requires that machine-drivers for codecs which are converted
to use the new helper functions from arizona-jack.c are modified to
create a snd_soc_jack through snd_soc_card_jack_new() and register
this jack with the codec through snd_soc_component_set_jack().
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-10-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Drivers for MFD child-devices such as the arizona codec drivers
and the arizona-extcon driver can choose to either make
runtime_pm_get/_put calls on their own child-device, which will
then be propagated to their parent; or they can make them directly
on their MFD parent-device.
The arizona-extcon code was using runtime_pm_get/_put calls on
its own child-device where as the codec drivers are using
runtime_pm_get/_put calls on their parent.
The arizona-extcon MFD cell/child-device has been removed and this
commit is part of refactoring the arizona-extcon code into a library
to be used directly from the codec drivers.
Specifically this commit moves the code over to make
runtime_pm_get/_put calls on the parent device (on arizona->dev)
bringing the code inline with how the codec drivers do this.
Note this also removes the pm_runtime_enable/_disable calls
as pm_runtime support has already been enabled on the parent-device
by the arizona MFD driver.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report
jack state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-9-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move all the jack-detect variables from struct arizona_extcon_info to
struct arizona_priv.
This is part of a patch series converting the arizona extcon driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307151807.35201-8-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with ipg_clk clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-7-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with ipg clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with mem clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with mem clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with core clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with bus clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk,but explicitly enable
clock when it is used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1616579928-22428-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The media and deep-buffer DAIs only support 48000 Hz samplerate,
remove the 44100 sample-rate from their descriptions.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SST firmware's media and deep-buffer inputs are hardcoded to
S16LE, the corresponding DAIs don't have a hw_params callback and
their prepare callback also does not take the format into account.
So far the advertising of non working S24LE support has not caused
issues because pulseaudio defaults to S16LE, but changing pulse-audio's
config to use S24LE will result in broken sound.
Pipewire is replacing pulse now and pipewire prefers S24LE over S16LE
when available, causing the problem of the broken S24LE support to
come to the surface now.
Cc: stable@vger.kernel.org
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/866
Fixes: 098c2cd281 ("ASoC: Intel: Atom: add 24-bit support for media playback and capture")
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Controller needs to ensure display power is enabled only for
HDA controller reset. Drop the display power-up/down calls from
D0i3 entry/exit paths.
This was previously not possible as codec drivers could not resume the
links, and instead controller kept the reference to display power. The
state of display power had be maintained in the D0i3 entry/exit code.
With commit 87fc20e4a0 ("ASoC: SOF: Intel: hda: use hdac_ext
fine-grained link management"), this is no longer needed and the code
can be cleaned up.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Keyon Jie <yang.jie@intel.com>
Link: https://lore.kernel.org/r/20210322143830.3880293-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.
>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.
So search available sysclk_divs from 2 to 1 other than from 1 to 2.
Fixes: 84fdc00d51 ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ELH is a derivative of TGL, so it should be exposed in tgl.c for
consistency.
No functional change.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Set shutdown call to hda_dsp_shutdown.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
According to hardware spec and PMC FW requirement, the DSP must be
in D3 state before entering S5. Define the shutdown function to use
snd_sof_suspend as shutdown callback to make sure DSP is in D3 state.
Fixes: 44a4cfad8d ("ASoC: SOF: Intel: tgl: do thorough remove at .shutdown() callback")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
EHL is derived from TGL, not CNL, so we shall use the TGL ops.
Fixes: 8d4ba1be3d ("ASoC: SOF: pci: split PCI into different drivers")
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the probe is handled in a workqueue, we must use
cancel_work_sync() in the shutdown helper to avoid possible race
conditions.
We must also take care of possible errors happening in a probe
workqueue or during pm_runtime resume (called e.g. before shutdown for
PCI devices). We should really only try to access hardware registers
and initiate IPCs if the DSP is fully booted.
Fixes: daff7f1478 ("ASoC: SOF: add snd_sof_device_shutdown() helper for shutdown")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When checking for enabled cores it isn't enough to check that
some of the requested cores are running, we have to check that
all of them are.
Fixes: 747503b181 ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We should use the topology configured mclk if it existed, which can make
sure we are aligned with the FW side about the mclk usage.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210319124950.3853994-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper sof_dai_ssp_mclk to get the topology configured MCLK from a
pcm_runtime, return 0 if it is not available, and error if the dai type
is not SSP at the moment.
Export the helper for external use, e.g. from machine drivers.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210319124950.3853994-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When there is power domain bind with bus clock,
The call flow:
devm_regmap_init_mmio_clk
- clk_prepare()
- clk_pm_runtime_get()
cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.
So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk, then explicitly enable clock when
using by pm_runtime_get(), if CONFIG_PM=n, then
fsl_sai_runtime_resume will be explicitly called.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Link: https://lore.kernel.org/r/1616141203-13344-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Building with 'make W=1' shows some warnings about empty function-style
macros:
sound/core/pcm_memory.c: In function 'preallocate_pages':
sound/core/pcm_memory.c:236:49: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
236 | preallocate_info_init(substream);
sound/core/seq_device.c: In function 'snd_seq_device_dev_register':
sound/core/seq_device.c:163:41: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
163 | queue_autoload_drivers();
Change them to empty inline functions, which are more robust here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322103128.547199-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of bebob driver doesn't correctly handle the case
that the device has multiple MIDI ports. The cause is the number of MIDI
conformant data channels is passed to AM824 data block processing layer.
This commit fixes the bug.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation counts the number of input/output plugs for MIDI
type and uses the count as the number of physical MIDI ports. However,
the number of channels of the port represents the count.
This commit fixes the bug by additional vendor-specific AVC command
extension.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA bebob driver scans supported formats of packet for each direction
when probing the target device. Some helper functions are used for the
scanning, however its implementation is not necessarily irredundant.
This commit refactors the helper functions to remove redundant codes.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210321032831.340278-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We found the alc_update_headset_mode() is not called on some machines
when unplugging the headset, as a result, the mode of the
ALC_HEADSET_MODE_UNPLUGGED can't be set, then the current_headset_type
is not cleared, if users plug a differnt type of headset next time,
the determine_headset_type() will not be called and the audio jack is
set to the headset type of previous time.
On the Dell machines which connect the dmic to the PCH, if we open
the gnome-sound-setting and unplug the headset, this issue will
happen. Those machines disable the auto-mute by ucm and has no
internal mic in the input source, so the update_headset_mode() will
not be called by cap_sync_hook or automute_hook when unplugging, and
because the gnome-sound-setting is opened, the codec will not enter
the runtime_suspend state, so the update_headset_mode() will not be
called by alc_resume when unplugging. In this case the
hp_automute_hook is called when unplugging, so add
update_headset_mode() calling to this function.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We found a recording issue on a Dell AIO, users plug a headset-mic and
select headset-mic from UI, but can't record any sound from
headset-mic. The root cause is the determine_headset_type() returns a
wrong type, e.g. users plug a ctia type headset, but that function
returns omtp type.
On this machine, the internal mic is not connected to the codec, the
"Input Source" is headset mic by default. And when users plug a
headset, the determine_headset_type() will be called immediately, the
codec on this AIO is alc274, the delay time for this codec in the
determine_headset_type() is only 80ms, the delay is too short to
correctly determine the headset type, the fail rate is nearly 99% when
users plug the headset with the normal speed.
Other codecs set several hundred ms delay time, so here I change the
delay time to 850ms for alc2x4 series, after this change, the fail
rate is zero unless users plug the headset slowly on purpose.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210320091542.6748-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Majority of changes are various ASoC device/platform-specific small
fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are usual HD-audio quirks.
-----BEGIN PGP SIGNATURE-----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=kGbc
-----END PGP SIGNATURE-----
Merge tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes are various ASoC device/platform-specific
small fixes (including a removal of stale file) while the only common
change is a clk management fix in ASoC simple-card driver.
The rest are the usual HD-audio quirks"
* tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits)
ALSA: usb-audio: Fix unintentional sign extension issue
ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8
ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms
ASoC: rt711: add snd_soc_component remove callback
ASoC: rt5659: Update MCLK rate in set_sysclk()
ASoC: simple-card-utils: Do not handle device clock
ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8
ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8
ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro
ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air
ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge
ALSA: dice: fix null pointer dereference when node is disconnected
ALSA: hda: generic: Fix the micmute led init state
ASoC: qcom: lpass-cpu: Fix lpass dai ids parse
spi: cadence: set cqspi to the driver_data field of struct device
ASoC: SOF: intel: fix wrong poll bits in dsp power down
ASoC: codecs: wcd934x: add a sanity check in set channel map
ASoC: qcom: sdm845: Fix array out of range on rx slim channels
ASoC: qcom: sdm845: Fix array out of bounds access
ASoC: remove remnants of sirf prima/atlas audio codec
...
Hi Mark
Indicating error message when failed case is very useful for debuging.
In many case, it uses below style.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
I know many people have many opinion, but if function() indicates error
message, we can get same and detail information without forgot, and it is better.
This patch-set tidyup to do it.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
Kuninori Morimoto (14):
ASoC: soc-pcm: indicate error message at soc_pcm_open()
ASoC: soc-pcm: indicate error message at soc_pcm_hw_params()
ASoC: soc-pcm: indicate error message at soc_pcm_prepare()
ASoC: soc-pcm: indicate error message at dpcm_path_get()
ASoC: soc-pcm: indicate error message at dpcm_be_dai_trigger()
ASoC: soc-pcm: indicate error message at dpcm_apply_symmetry()
ASoC: soc-pcm: indicate error message at dpcm_run_update_startup/shutdown()
ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_startup()
ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_hw_params()
ASoC: soc-pcm: indicate error message at dpcm_fe/be_dai_prepare()
ASoC: soc-pcm: don't indicate error message for soc_pcm_hw_free()
ASoC: soc-pcm: don't indicate error message for dpcm_be_dai_hw_free()
ASoC: don't indicate error message for snd_soc_[pcm_]dai_xxx()
ASoC: don't indicate error message for snd_soc_[pcm_]component_xxx()
include/sound/soc-dpcm.h | 2 +-
sound/soc/soc-compress.c | 9 +-
sound/soc/soc-core.c | 22 +----
sound/soc/soc-dapm.c | 24 ++---
sound/soc/soc-pcm.c | 197 +++++++++++++++++++--------------------
5 files changed, 108 insertions(+), 146 deletions(-)
--
2.25.1
This reverts commit f8e4ae10de ("ALSA: hda: Allow setting
preallocation again for x86").
The reverted commit itself is a revert of c31427d0d2 ("ALSA: hda: No
preallocation on x86 platforms"). It was needed because HDA allowed very
big allocations, up to 1GB per stream. However as previous commit in
this series changes maximum allowed allocation per stream to 4MB, we can
safely revert it back.
On systems where there are a lot of FrontEnds, when
CONFIG_SND_HDA_PREALLOC_SIZE != 0 ALSA core allocates memory for each
FE, which may cause out of memory problems due to per card limit. Force
config to 0 on X86, so memory will be allocated on as needed basis.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=201251#c322
Suggested-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210318160618.2504068-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add debug prints after calls of do_alloc_pages. One simplification would
be to move print into do_alloc_pages, however it would cause spam in
logs, as preallocate_pcm_pages loops over do_alloc_pages trying lower
values in case of failures.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20210318160618.2504068-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sparse tool complains as follows:
sound/soc/codecs/rt1019.c:927:19: warning:
symbol 'rt1019_i2c_driver' was not declared. Should it be static?
This symbol is not used outside of rt1019.c, so this
commit marks it static.
Fixes: 7ec79d3850 ("ASoC: rt1019: add rt1019 amplifier driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210319094102.4185096-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All snd_soc_component_xxx() and snd_soc_pcm_component_xxx() itself
indicate error message if failed.
Its caller doesn't need to indicate duplicated error message.
This patch removes it.
All snd_soc_component_xxx() indicate error message if failed.
Its caller doesn't need to indicate duplicated error message.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s6puta6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All snd_soc_dai_xxx() and snd_soc_pcm_dai_xxx() itself
indicate error message if failed.
Its caller doesn't need to indicate duplicated error message.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6r5utaa.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_pcm_hw_free() never fail, error message is not needed.
We can't use void function for it, because it is used
part of struct snd_pcm_ops :: hw_free.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czw1utaj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at dpcm_fe/be_dai_prepare()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87eeghutap.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at dpcm_fe/be_dai_hw_params()
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ft0xutat.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at dpcm_fe/be_dai_startup().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h7ldutay.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch also
do below to dpcm_run_update_startup()
1) remove duplicated ret = -EINVAL
2) remove blank line
do below to dpcm_run_update_shutdown()
1) remove unused ret
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87im5tutb3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at dpcm_apply_symmetry(...)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0q9utb9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
Now, dpcm_be_dai_trigger() user uses it like below.
err = dpcm_be_dai_trigger(...);
if (err < 0)
dev_err(..., "ASoC: trigger FE failed %d\n", err);
But we can get more detail information if dpcm_be_dai_trigger() itself
had dev_err(). And above error message is confusable,
failed is *BE*, not *FE*.
This patch indicates error message at dpcm_be_dai_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87lfaputbe.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
Now, many place uses dpcm_path_get() like below
ret = dpcm_path_get(...);
if (ret < 0)
goto error;
(A) else if (ret == 0)
dev_dbg(...)
But here, (A) part can be indicated at dpcm_path_get() not caller.
It is simple and readable code.
This patch do it.
Small detail behaviors will be exchanged by this patch.
1) indicates debug info (= path numbers) if path > 0 case only
(It was *always* indicated).
2) soc_dpcm_fe_runtime_update() is indicating error message
for paths < 0 case, but it is already done at dpcm_path_get().
Thus just remove it. but dev_dbg() vs dev_warn() is exchanged.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtv5utbj.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at soc_pcm_prepare().
By this patch, dpcm_fe/be_dai_prepare(...)
temporary lacks FE/BE error info, but it will reborn soon.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o8flutbn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at soc_pcm_hw_params().
By this patch, dpcm_fe/be_dai_hw_params(...)
temporary lacks FE/BE error info, but it will reborn soon.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pn01utbt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Indicating error message when failed case is very useful for debuging.
In many case, its style is like below.
int function(...)
{
...
return ret;
}
int caller(...)
{
...
ret = function(...);
if (ret < 0)
dev_err(...)
...
}
This is not so bad, but in this style *each caller* needs to indicate
duplicate same error message, and some caller is forgetting to do it.
And caller can't indicate detail function() error information.
If function() indicates error message, we can get same and
detail information without forgot.
int function(...)
{
...
if (ret < 0)
dev_err(...)
return ret;
}
int caller(...)
{
...
ret = function(...);
...
}
This patch follow above style at soc_pcm_open().
By this patch, dpcm_fe/be_dai_startup(...)
temporary lacks FE/BE error info, but it will reborn soon.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1khutby.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
This series adds missing hardware reset controls to I2S and AC97 drivers,
corrects runtime PM usage and drivers probe/remove order. Currently drivers
happen to work properly because reset is implicitly deasserted by tegra-clk
driver, but clk driver shouldn't touch the resets and we need to fix it
because this breaks other Tegra drivers. Previously we fixed the resets of
the AHUB and HDMI codec drivers, but turned out that we missed the I2C and
AC97 drivers.
Thanks to Paul Fertser for testing the pending clk patches and finding
that audio got broken on Tegra20 AC100 netbook because of the missing I2S
reset.
Changelog:
v5: - After taking another look at the drivers I noticed couple more
things that could be improved. These new patches correct runtime PM
and probe/remove order of the drivers:
ASoC: tegra20: spdif: Correct driver removal order
ASoC: tegra20: spdif: Remove handing of disabled runtime PM
ASoC: tegra20: i2s: Add system level suspend-resume callbacks
ASoC: tegra20: i2s: Correct driver removal order
ASoC: tegra20: i2s: Use devm_clk_get()
ASoC: tegra20: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: i2s: Correct driver removal order
ASoC: tegra30: i2s: Use devm_clk_get()
ASoC: tegra30: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: ahub: Reset global variable
ASoC: tegra30: ahub: Correct suspend-resume callbacks
ASoC: tegra30: ahub: Remove handing of disabled runtime PM
v4: - Added missing prototype for reset_control_bulk_put().
v3: - Fixed reset stubs for !CONFIG_RESET_CONTROLLER.
v2: - After some more testing I found that I2S control logic doesn't require
I2S clock to be enabled for resetting. Hence it's fine to have I2S to
be reset by parent AHUB driver, so I dropped "tegra30: i2s: Add reset
control" patch.
- While I was double-checking resets on Tegra30, I found that that
Tegra30 I2S driver has a broken runtime PM which doesn't restore
hardware state on resume and it's lost after AHUB RPM-resume.
Thus, added this new patch "tegra30: i2s: Restore hardware state
on runtime PM resume".
- Added new patches which switch AHUB driver to use reset-bulk API.
I took the RFC patch from Philipp Zabel, fixed it and added
devm_reset_control_bulk_optional_get_exclusive_released() that
will be useful for further Tegra GPU patches. This is a minor
improvement which makes code cleaner.
Dmitry Osipenko (16):
ASoC: tegra20: ac97: Add reset control
ASoC: tegra20: i2s: Add reset control
ASoC: tegra30: i2s: Restore hardware state on runtime PM resume
ASoC: tegra30: ahub: Switch to use reset-bulk API
ASoC: tegra20: spdif: Correct driver removal order
ASoC: tegra20: spdif: Remove handing of disabled runtime PM
ASoC: tegra20: i2s: Add system level suspend-resume callbacks
ASoC: tegra20: i2s: Correct driver removal order
ASoC: tegra20: i2s: Use devm_clk_get()
ASoC: tegra20: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: i2s: Correct driver removal order
ASoC: tegra30: i2s: Use devm_clk_get()
ASoC: tegra30: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: ahub: Reset global variable
ASoC: tegra30: ahub: Correct suspend-resume callbacks
ASoC: tegra30: ahub: Remove handing of disabled runtime PM
Philipp Zabel (1):
reset: Add reset_control_bulk API
drivers/reset/core.c | 215 ++++++++++++++++++++++
include/linux/reset.h | 315 ++++++++++++++++++++++++++++++++
sound/soc/tegra/tegra20_ac97.c | 21 +++
sound/soc/tegra/tegra20_ac97.h | 1 +
sound/soc/tegra/tegra20_i2s.c | 60 +++---
sound/soc/tegra/tegra20_i2s.h | 1 +
sound/soc/tegra/tegra20_spdif.c | 16 +-
sound/soc/tegra/tegra30_ahub.c | 168 ++++++-----------
sound/soc/tegra/tegra30_ahub.h | 5 +-
sound/soc/tegra/tegra30_i2s.c | 65 ++-----
10 files changed, 667 insertions(+), 200 deletions(-)
--
2.30.2
base-commit: a38fd87484
This patch adds jsl_rt5682_rt1015p which supports the RT5682 headset
codec and ALC1015Q-VB speaker amplifier combination on JasperLake
platform.
This driver also supports ALC1015Q-CG if running in auto-mode.
Following table shows the audio interface support of the two
amplifiers.
| ALC1015Q-CG | ALC1015Q-VB
=====================================
I2C | Yes | No
Auto-mode | 48K, 64fs | 16k, 32fs
| 48k, 32fs
| 48k, 64fs
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210317110824.20814-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/intel/skylake/skl-topology.c:3613:13: warning: stack frame
size of 1304 bytes in function 'skl_tplg_complete'
[-Wframe-larger-than=]
struct snd_ctl_elem_value is 1224 bytes in my configuration.
Heap allocate it, then free it within the current frame.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Link: https://lore.kernel.org/r/20210315013908.217219-1-nick.desaulniers@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/tscs454.c:730:37: style: Same value in both branches
of ternary operator. [duplicateValueTernary]
val = pll1 ? FV_PLL1CLKEN_DISABLE : FV_PLL2CLKEN_DISABLE;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/tas2770.c:109:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/tas2562.c:530:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/tas2562.c:525:6: note: If condition 'ret' is true, the function will return/exit
if (ret)
^
sound/soc/codecs/tas2562.c:530:9: note: Returning identical expression 'ret'
return ret;
^
Fix with return 0
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck throws a warning:
sound/soc/codecs/tas2562.c:203:4: style: Assignment of function
parameter has no effect outside the function. [uselessAssignmentArg]
tx_mask &= ~(1 << right_slot);
^
This assignment seems to come from a copy/paste but the value is
indeed not used. Let's remove it.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/sti-sas.c:54:25: style: struct member
'sti_dac_audio::field' is never used. [unusedStructMember]
struct regmap_field **field;
^
sound/soc/codecs/sti-sas.c:55:24: style: struct member
'sti_dac_audio::rst' is never used. [unusedStructMember]
struct reset_control *rst;
^
sound/soc/codecs/sti-sas.c:61:25: style: struct member
'sti_spdif_audio::field' is never used. [unusedStructMember]
struct regmap_field **field;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/pcm1681.c:87:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
int i = 0, val = -1, enable = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/nau8825.c:2113:10: style: Variable 'ret' is assigned
a value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/mt6359.c:242:19: style: Variable 'stage' is assigned a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6359.c:260:19: style: Variable 'stage' is assigned a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6359.c:274:8: style: Variable 'i' is assigned a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6359.c:274:19: style: Variable 'stage' is assigned a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warnings:
sound/soc/codecs/mt6358.c:334:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6358.c:350:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
185/930 files checked 25% done
Checking sound/soc/codecs/mt6359.c ...
sound/soc/codecs/mt6359.c:274:8: style: Variable 'i' is assigned a
value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
sound/soc/codecs/mt6359.c:274:19: style: Variable 'stage' is assigned
a value that is never used. [unreadVariable]
int i = 0, stage = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/max98090.c:1835:16: style: Variable 'test_diff' is
assigned a value that is never used. [unreadVariable]
int test_diff = INT_MAX;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fix cppcheck warning:
sound/soc/codecs/hdmi-codec.c:25:16: style: struct member
'hdmi_codec_channel_map_table::spk_mask' is never
used. [unusedStructMember]
unsigned long spk_mask; /* speaker position bit mask */
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix cppcheck warning:
sound/soc/codecs/hdmi-codec.c:745:5: style: Redundant initialization
for 'cf'. The initialized value is overwritten before it is
read. [redundantInitialization]
cf = dai->playback_dma_data;
^
sound/soc/codecs/hdmi-codec.c:738:31: note: cf is initialized
struct hdmi_codec_daifmt *cf = dai->playback_dma_data;
^
sound/soc/codecs/hdmi-codec.c:745:5: note: cf is overwritten
cf = dai->playback_dma_data;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck complains a lot about possible null pointer dereferences but
it's again a case of useless initializations to NULL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/da7219-aad.c:118:22: style: Variable 'ret' is
assigned a value that is never used. [unreadVariable]
int report = 0, ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20210312182246.5153-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/codecs/cx2072x.c:1436:10: style:inconclusive: Found
duplicate branches for 'if' and 'else'. [duplicateBranch]
} else if (type & 0x4) {
^
sound/soc/codecs/cx2072x.c:1439:5: note: Found duplicate branches for
'if' and 'else'.
} else {
^
sound/soc/codecs/cx2072x.c:1436:10: note: Found duplicate branches for
'if' and 'else'.
} else if (type & 0x4) {
^
The last two branches do the same thing and can be collapsed together.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210312182246.5153-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/codecs/cx2072x.c:830:26: style: Variable
'reg1.r.rx_data_one_line' is reassigned a value before the old one has
been used. [redundantAssignment]
reg1.r.rx_data_one_line = 1;
^
sound/soc/codecs/cx2072x.c:782:26: note: reg1.r.rx_data_one_line is
assigned
reg1.r.rx_data_one_line = 1;
^
sound/soc/codecs/cx2072x.c:830:26: note: reg1.r.rx_data_one_line is
overwritten
reg1.r.rx_data_one_line = 1;
^
sound/soc/codecs/cx2072x.c:831:26: style: Variable
'reg1.r.tx_data_one_line' is reassigned a value before the old one has
been used. [redundantAssignment]
reg1.r.tx_data_one_line = 1;
^
sound/soc/codecs/cx2072x.c:783:26: note: reg1.r.tx_data_one_line is
assigned
reg1.r.tx_data_one_line = 1;
^
sound/soc/codecs/cx2072x.c:831:26: note: reg1.r.tx_data_one_line is
overwritten
reg1.r.tx_data_one_line = 1;
^
Likely copy/paste.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210312182246.5153-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck complains of a possible issue:
sound/soc/codecs/cros_ec_codec.c:98:10: warning: Possible null pointer
dereference: in [nullPointer]
memcpy(in, msg->data, insize);
^
sound/soc/codecs/cros_ec_codec.c:162:34: note: Calling function
'send_ec_host_command', 5th argument 'NULL' value is 0
(uint8_t *)&p, sizeof(p), NULL, 0);
^
sound/soc/codecs/cros_ec_codec.c:98:10: note: Null pointer dereference
memcpy(in, msg->data, insize);
^
In practice the access to the pointer is protected by another
argument, but this is likely to fool other static analysis tools. Add
a test to avoid doing the memcpy if the pointer is NULL or the size is
zero.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210312182246.5153-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/codecs/adau1977.c:242:9: warning: Identical condition and
return expression 'ret', return value is always 0
[identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/adau1977.c:239:6: note: If condition 'ret' is true,
the function will return/exit
if (ret)
^
sound/soc/codecs/adau1977.c:242:9: note: Returning identical expression 'ret'
return ret;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warning:
sound/soc/codecs/ad1836.c:311:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit]
return ret;
^
sound/soc/codecs/ad1836.c:308:6: note: If condition 'ret' is true, the function will return/exit
if (ret)
^
sound/soc/codecs/ad1836.c:311:9: note: Returning identical expression 'ret'
return ret;
^
Likely copy/paste between adc and dac cases.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cppcheck warnings:
sound/soc/codecs/ab8500-codec.c:117:20: style: struct member 'ab8500_codec_drvdata_dbg::vaud' is never used. [unusedStructMember]
struct regulator *vaud;
^
sound/soc/codecs/ab8500-codec.c:118:20: style: struct member 'ab8500_codec_drvdata_dbg::vamic1' is never used. [unusedStructMember]
struct regulator *vamic1;
^
sound/soc/codecs/ab8500-codec.c:119:20: style: struct member 'ab8500_codec_drvdata_dbg::vamic2' is never used. [unusedStructMember]
struct regulator *vamic2;
^
sound/soc/codecs/ab8500-codec.c:120:20: style: struct member 'ab8500_codec_drvdata_dbg::vdmic' is never used. [unusedStructMember]
struct regulator *vdmic;
^
The structure is never used, remove.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312182246.5153-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra30 AHUB driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-18-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 AHUB driver always syncs hardware state on a runtime PM resume,
hence there is no needed to re-sync the state on system resume. Replace
the suspend-resume callbacks with a generic helpers which ensure that
AHUB is suspended using RPM callbacks across system suspend-resume.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-17-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 AHUB uses global variable that is never reset by the driver on
a probe failure and on driver removal, meaning that driver will never try
to re-probe and can't be unbound. Make driver to reset the variable.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-16-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra30 I2S driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-15-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 I2S driver has a wrong driver removal order, which should be
opposite to the registration order, but it's not. In particular the
runtime PM is disabled in a wrong order. Fix the order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-13-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra20 I2S driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-12-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 I2S driver has a wrong driver removal order, which should be
opposite to the registration order, but it's not. In particular the
runtime PM is disabled in a wrong order. Fix the order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-10-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add system level suspend-resume callbacks in order to ensure that I2S
is gated before system is suspended. This puts Tegra20 I2S driver on
par with the Tegra30 I2S driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-9-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Runtime PM is always available on Tegra since commit 40b2bb1b13
("ARM: tegra: enforce PM requirement"), hence there is no need to
handle the case of a disabled RPM by Tegra drivers. Remove handing
of a disabled runtime PM from Tegra20 SPDIF driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-8-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 SPDIF driver has a wrong driver removal order, which should be
opposite to the registration order, but it's not. In particular the
runtime PM is disabled in a wrong order. Fix the order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-7-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra30 I2S driver syncs regmap cache only on resume from system suspend,
but hardware is reset across the runtime suspend because RPM of the parent
AHUB driver resets the I2S hardware, hence h/w state is lost after each
RPM resume. The problem isn't visible because hardware happens to be fully
reprogrammed after each RPM resume. Move hardware syncing to RPM resume in
order to restore h/w state properly.
Fixes: ed9ce1ed22 ("ASoC: tegra: ahub: Reset hardware properly")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-4-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2S reset may be asserted at a boot time, in particular this is the
case on Tegra20 AC100 netbook. Tegra20 I2S driver doesn't manage the
reset control and currently it happens to work because reset is implicitly
deasserted by the tegra-clk driver when I2S clock is enabled. The I2S
permanently stays in a reset once tegra-clk is fixed to not touch the
resets, which it shouldn't be doing. Add reset control to the Tegra20
I2S driver.
Note that I2S reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Tested-by: Paul Fertser <fercerpav@gmail.com> # T20 AC100
Reported-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-3-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra20 AC97 driver doesn't manage the AC97 controller reset, relying on
implicit deassertion of the reset by tegra-clk driver, which needs to be
fixed since this behaviour is unacceptable by other Tegra drivers. Add
explicit reset control to the Tegra20 AC97 driver.
Note that AC97 reset was always specified in Tegra20 device-tree, hence
DTB ABI changes aren't required.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The shifting of the u8 integer device by 24 bits to the left will
be promoted to a 32 bit signed int and then sign-extended to a
64 bit unsigned long. In the event that the top bit of device is
set then all then all the upper 32 bits of the unsigned long will
end up as also being set because of the sign-extension. Fix this
by casting device to an unsigned long before the shift.
Addresses-Coverity: ("Unintended sign extension")
Fixes: a07df82c79 ("ALSA: usb-audio: Add DJM750 to Pioneer mixer quirk")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210318132008.15266-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a lot of mostly platform specific fixes here, the only one which
is generic is a fix for regressions on devices with more complex
clocking support with simple-card. There's also a few new device IDs
and platform quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmBSCQ0ACgkQJNaLcl1U
h9BBqAf+IzAw12qnAnV/XoGm+qzbrp6s8jzLCvuRVqBR9tFpADJ6MAjqCe/YQJDS
PNw7VQIYv2/f5CUEYBEDw5dPbEv6VOsv34Ffu/bqBpjVpXcHfm1W55rdXnchmjlk
Yv93yNf2IrY7cxkQS+c7DsUykwL9Wf+zNN+PkFXrfss6rweaQIB+Hzw8/JD7+hoZ
8i02merXWjOv+i2KaubWrg7IvN+nv55GvxcTIFhf/fauvR+tUNoF7GO6JnS2EWof
kwJSnuLe2Z1RgCGfxdOeJJ3yje27iYp3g42Ctdx3MU8QdJm9GaqezFJFMxg4VUhB
mgWwHHeLbDFxU1eXetCAnTYUPbRJeg==
=x5xY
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.12-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.12
Quite a lot of mostly platform specific fixes here, the only one which
is generic is a fix for regressions on devices with more complex
clocking support with simple-card. There's also a few new device IDs
and platform quirks.
The jack handling for arizona codecs is being refactored so that it is
done directly by the codec drivers, instead of having an extcon-driver
bind to a separate "arizona-extcon" child-device for this.
drivers/mfd/arizona-core.c has already been updated to no longer
instantiate an "arizona-extcon" child-device for the arizona codecs.
This means that the "arizona-extcon" driver is no longer useful
(there are no longer any devices for it to bind to).
This commit drops the extcon Kconfig / Makefile bits and moves
drivers/extcon/extcon-arizona.c to sound/soc/codecs/arizona-jack.c .
This is a preparation patch for converting the arizona extcon-driver into
a helper library for letting the arizona codec-drivers directly report jack
state through the standard sound/soc/soc-jack.c functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are files in sound/pci/ctxfi which follow this syntax in their file
headers, i.e. start with '/**' like comments, which causes unexpected
warnings from kernel-doc.
E.g., running scripts/kernel-doc -none on sound/pci/ctxfi/ctresource.c
causes this warning:
"warning: wrong kernel-doc identifier on line:
* Copyright (C) 2008, Creative Technology Ltd. All Rights Reserved."
Similarly for other files too.
Provide a simple fix by replacing the kernel-doc like comment syntax with
general format, i.e. "/*", to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210317203932.23993-1-yashsri421@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
There are files in sound/pci/asihpi which follow this syntax in their file
headers, i.e. start with '/**' like comments, which causes unexpected
warnings from kernel-doc.
E.g., running scripts/kernel-doc -none on sound/pci/asihpi/hpidspcd.h
causes this warning:
"warning: Cannot understand
on line 4 - I thought it was a doc line"
Provide a simple fix by replacing the kernel-doc like comment syntax with
general format, i.e. "/*", to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210317202144.20290-1-yashsri421@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With commit 1e30f642cf ("ASoC: simple-card-utils: Fix device module clock")
simple-card-utils can control MCLK clock for rate updates or enable/disable.
But this is breaking some platforms where it is expected that codec drivers
would actually handle the MCLK clock. One such example is following platform.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
In above case codec, wm8904, is using internal PLL and configures sysclk
based on fixed MCLK input. In such cases it is expected that, required PLL
output or sysclk, is just passed via set_sysclk() callback and card driver
need not actually update MCLK rate. Instead, codec can take ownership of
this clock and do the necessary configuration.
So the original commit is reverted and codec driver for rt5659 is updated
to fix my board which has this codec.
Sameer Pujar (2):
ASoC: simple-card-utils: Do not handle device clock
ASoC: rt5659: Update MCLK rate in set_sysclk()
sound/soc/codecs/rt5659.c | 5 +++++
sound/soc/generic/simple-card-utils.c | 13 +++++++------
2 files changed, 12 insertions(+), 6 deletions(-)
--
2.7.4
The HP EliteBook 850 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316094236.89028-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
./sound/soc/fsl/imx-hdmi.c:226:3-8: No need to set .owner here. The core
will do it.
Remove .owner field if calls are used which set it automatically
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1614848881-29637-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_hw_params_set_rate_near can return incorrect sample rate in
some cases, e.g. when the backend output rate is set to some value higher
than 48000 Hz and the input rate is 8000 Hz. So passing the value returned
by snd_pcm_hw_params_set_rate_near to snd_pcm_hw_params will result in
"FSO/FSI ratio error" and playing no audio at all while the userland
is not properly notified about the issue.
If SRC is unable to convert the requested sample rate to the sample rate
the backend is using, then the requested sample rate should be adjusted in
rsnd_hw_params. The userland will be notified about that change in the
returned hw_params structure.
Signed-off-by: Mikhail Durnev <mikhail_durnev@mentor.com>
Link: https://lore.kernel.org/r/1615870055-13954-1-git-send-email-mikhail_durnev@mentor.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When reading from IPC flood debugfs entries no need to check whether
.cache_buf is NULL - it's impossible since otherwise the initialisation
would have failed. This also fixes a klocwork reported issue:
passed to function and may be dereferenced there by passing argument 2
to function 'memcpy' at line 510.
sound/soc/sof/debug.c:510 | sof_dfsentry_read()
Reported-by: Keqiao Zhang <keqiao.zhang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Xiuli Pan <xiulipan@outlook.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315163932.18663-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_sof_debugfs_buf_item() is an exported function and is called from
different locations to initialise different debugfs entries. However
.cache_buf is only needed for IPC flood entries. Limit allocations
respectively.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Xiuli Pan <xiulipan@outlook.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315163932.18663-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If debugfs initialisation fails partially in sof_probe_continue() some
debugfs files and the root directory might have been created
successfully. They have to be cleaned up if some of them failed too.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Xiuli Pan <xiulipan@outlook.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210315163932.18663-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We do some IO operations in the snd_soc_component_set_jack callback
function and snd_soc_component_set_jack() will be called when soc
component is removed. However, we should not access SoundWire registers
when the bus is suspended.
So set regcache_cache_only(regmap, true) to avoid accessing in the
soc component removal process.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210316005254.29699-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 1e30f642cf ("ASoC: simple-card-utils: Fix device
module clock"). The original patch ended up breaking following platform,
which depends on set_sysclk() to configure internal PLL on wm8904 codec
and expects simple-card-utils to not update the MCLK rate.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
It would be best if codec takes care of setting MCLK clock via DAI
set_sysclk() callback.
Reported-by: Michael Walle <michael@walle.cc>
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Fixes: 1e30f642cf ("ASoC: simple-card-utils: Fix device module clock")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/1615829492-8972-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP EliteBook 840 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316074626.79895-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS8409/CS42L42 Driver currently does most of the platform specific
setup inside the main body of the code, however, this setup can be
moved into fixup functions, to make the driver more generic.
Making the driver more generic, allows the driver to use the
cs_parse_auto_config function in the patch function. This function
forces all of the ADCs to be permanently powered, which means the
cap_sync_hook function is no longer needed to restart the stream, when
the jack has been ejected.
Since the codec is re-initialized on every init/resume, there is no
need to add specific verbs to be run on init, and instead these can
be combined with the initialization verbs, which are run on init.
In addition, the extra fixup verbs are no longer required, since this
is taken care of elsewhere.
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
[ Use fallthrough macro instead of comment -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210315190716.47686-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Existing name "Headset Mic Volume Control" causes multiple Microphone
entries to appear in UI. Using name "Mic Volume Control" ensures only a
single Microphone entry exists when the Headset is connected.
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
BugLink: https://bugs.launchpad.net/bugs/1918378
Reported-and-tested-by: You-Sheng Yang <vicamo.yang@canonical.com>
Link: https://lore.kernel.org/r/20210315190716.47686-4-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor changes, clean up code, remove unnecessary
initialization of variables, reduced number of
warnings from ./scripts/checkpatch.pl from 19 to 0
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210315190716.47686-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Also removing 2 redundant cs8409_i2c_read() calls, as we already did read
them in a code above.
Tested on DELL Inspiron-3505, DELL Inspiron-3501, DELL Inspiron-3500
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210315190716.47686-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP EliteBook 840 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316065452.75659-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Resolves a merge issue with:
drivers/tty/hvc/hvcs.c
and we want the tty/serial fixes from 5.12-rc3 in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hi All,
Here is a resent of the remaining patches from my
"[PATCH 0/5] AsoC: rt5640/rt5651: Volume control fixes" series,
with the controversial "[PATCH 3/5] ASoC: rt5640: Add emulated
'DAC1 Playback Switch' control" patch dropped, and these
remaining 2 patches rebased to still apply with that patch dropped.
Regards,
Hans
Hans de Goede (2):
ASoC: rt5640: Rename 'Mono DAC Playback Volume' to 'DAC2 Playback
Volume'
ASoC: Intel: bytcr_rt5640: Add used AIF to the components string
sound/soc/codecs/rt5640.c | 6 +++---
sound/soc/intel/boards/bytcr_rt5640.c | 11 ++++++++---
2 files changed, 11 insertions(+), 6 deletions(-)
--
2.30.1
v4:
corrected Fixes tag
Added added Krzysztof Kozlowski's r-v-b tag
reverted patch2 to v2 since this is the agreement.
v3:
Added Sylwester tag
Rebased and squashed fix with initial patch which was merged at some
point but can't be found in broonie/for-next (not sure what happened?)
Corrected patch subjects to tm2_wm5110
Reverted second patch to initial v1, after agreement between Krzysztof
and Sylwester
v2:
added Krzysztof Kozlowski's tags
added fix for first patch already merged as suggested by Krzysztof Kozlowski
moved variable to lower scope in patch6
Pierre-Louis Bossart (2):
ASoC: samsung: tm2_wm5110: check of of_parse return value
ASoC: samsung: tm2_wm5110: remove shadowed variable
sound/soc/samsung/tm2_wm5110.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--
2.25.1
Request dma channel from specific dma controller instead of generic
dma controller list, otherwise, may get the wrong dma controller
if there are multi dma controllers such as i.MX8MP.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1614935977-21638-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on which AIF is used the UCM profile needs to setup
a different path through the rt5640's "Digital Mixer Path" graph.
ATM the UCM profiles solve this by just enabling paths to the outputs /
from the input from both AIF1 and AIF2 and then relying on the DAPM
framework to power-down the parts of the graph connected to the
unused AIF.
But in order to be able to use hardware-volumecontrol and to use
the hardware mute controls, which are necessary for mute LED control,
the UCM profiles need to know which AIF is actually being used.
Add a new "aif:1" or "aif:2" part to the component string to provide
info about the used AIF to userspace / to the UCM profiles.
Note the size of byt_rt5640_components is not increased because the
size of 32 chars already is big enough.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename 'Mono DAC Playback Volume' to 'DAC2 Playback Volume' and move it
from rt5640_specific_snd_controls[] to rt5640_snd_controls[].
The RT5640_DAC2_DIG_VOL register controlled by this mixer-element has
nothing to do with the Mono (Amplified) output which is only available
on the ALC5640 chip and not on the ALC5642 chip.
The RT5640_DAC2_DIG_VOL volume-control is the main volume control for
audio coming from the I2S2 / AIF2 input of the chip and as such is also
available on the ALC5642.
This commit results in the following userspace visible changes:
1. On devices with an ACL5640 codec, the 'Mono DAC Playback Volume'
control is renamed to 'DAC2 Playback Volume' allowing the alsa-lib
mixer code to properly group it with the 'DAC2 Playback Switch' which
is controlling the mute bits in the RT5640_DAC2_DIG_VOL register.
Note the removal of the 'Mono DAC Playback Volume' is not an issue for
userspace because the UCM profiles do not use it (the UCM profiles are
shared betweent the 5640 and 5642 and only the 5640 had this control).
2. On devices with an ACL5642 codec, there now will be a new
'DAC2 Playback Volume', grouped with the 'DAC2 Playback Switch'
Having a complete 'DAC2 Playback Volume' / 'DAC2 Playback Switch' pair
on both variants will allow enabling hardware-volume control by
setting the UCM PlaybackMasterElem to "DAC2" on devices where the
I2S2/AIF2 interface of the codec is used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210307150503.34906-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
sound/soc/samsung/tm2_wm5110.c:605:6: style: Variable 'ret' is
reassigned a value before the old one has been
used. [redundantAssignment]
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
sound/soc/samsung/tm2_wm5110.c:554:7: note: ret is assigned
ret = of_parse_phandle_with_args(dev->of_node, "i2s-controller",
^
sound/soc/samsung/tm2_wm5110.c:605:6: note: ret is overwritten
ret = devm_snd_soc_register_component(dev, &tm2_component,
^
The args is a stack variable, so it could have junk (uninitialized)
therefore args.np could have a non-NULL and random value even though
property was missing. Later could trigger invalid pointer dereference.
There's no need to check for args.np because args.np won't be
initialized on errors.
Fixes: 8d1513cef5 ("ASoC: samsung: Add support for HDMI audio on TM2 board")
Cc: <stable@vger.kernel.org>
Suggested-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312180231.2741-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Asus T100TAF uses the same jack-detect settings as the T100TA,
this has been confirmed on actual hardware.
Add these settings to the T100TAF quirks to enable jack-detect support
on the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210312114850.13832-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Mark
These are v2 of soc-pcm cleanup patches.
These has no relationship to each other.
My 1 concern is [3/8] patch. I think it is no problem,
but I'm not 100% sure why current code was such code.
Pierre-Louis / Liam might about something.
v1 -> v2
- soc_cpu/codec_dai_name() is now inline function
- rename soc_pcm_care_symmetry() to soc_pcm_update_symmetry()
v2 -> v3
- log fix at [6/8]
- Thus, it will be minus users at (2).
+ Thus, users will be a negative number at (2)
Link: https://lore.kernel.org/r/87tupuqqc8.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87tupqpg9x.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (8):
ASoC: soc-pcm: check DAI activity under soc_pcm_apply_symmetry()
ASoC: soc-pcm: add soc_cpu/codec_dai_name() macro
ASoC: soc-pcm: direct copy at snd_soc_set_runtime_hwparams()
ASoC: soc-pcm: add soc_pcm_update_symmetry()
ASoC: soc-pcm: add soc_hw_sanity_check()
ASoC: soc-pcm: fixup dpcm_be_dai_startup() user count
ASoC: soc-pcm: remove unneeded !rtd->dai_link check
ASoC: soc-pcm: share DPCM BE DAI stop operation
include/sound/soc-dpcm.h | 8 +-
sound/soc/soc-compress.c | 2 +-
sound/soc/soc-pcm.c | 243 ++++++++++++++++-----------------------
3 files changed, 105 insertions(+), 148 deletions(-)
--
2.25.1
Takashi Iwai