The "num-lanes" property is not used, remove it.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Adding a new compatible for 24c2048.
-----BEGIN PGP SIGNATURE-----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=tkO6
-----END PGP SIGNATURE-----
Merge tag 'at24-4.21-updates-for-wolfram' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.0
at24: updates for 4.21
Adding a new compatible for 24c2048.
Add Freescale MAG3110 dt-bindings and remove it from trivial-devices
dt-bingding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
[robh: fixup trivial-devices.txt change for trivial-devices.yaml]
Signed-off-by: Rob Herring <robh@kernel.org>
Address comments on the documentation after Yong's original patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This patch adds the details about the IPU3 Imaging Unit driver (both CIO2
and IMGU).
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
From Mimi:
In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load
syscall. Different signature verification methods exist for verifying
the kexec'ed kernel image. This pull request adds additional support
in IMA to prevent loading unsigned kernel images via the kexec_load
syscall, independently of the IMA policy rules, based on the runtime
"secure boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here.)
Those files are meant to be dual GPL 2.0 and GFDL without
implicit sections. However, by a wrong cut-and-paste, I ended
by applying a GPL 2+ license text to it, while still using the
GPL 2.0 SPDX tag, with would cause an ambiguity about the
licensing model.
Solve this by explicitly mentioning that the dual licensing
is between GPL 2.0 and GFDL and correcting the text.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwW4/oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2QMH/Rl6iMpTUX23tMHe
eXQzAOSvQXaWlFoX25j1Jvt8nhS7Uy8vkdpYTCOI/7DF0Jg4O/6uxcZkErlwWxb8
MW1rMgpfO+OpDLSLXAO2GKxaKI3ArqF2BcOQA2mji1/jR2VUTqmIvBoudn5d+GYz
19aCyfdzmVTC38G9sBhhcqJ10EkxLiHe2K74bf4JxVuSf2EnTI4LYt5xJPDoT0/C
6fOeUNwVhvv5a4svvzJmortq7x7BwyxBQArc7PbO0MPhabLU4wyFUOTRszgsGd76
o5JuOFwgdIIHlSSacGla6rKq10nmkwR07fHfRFFwbvrfBOEHsXOP2hvzMZX+FLBK
IXOzdtc=
=XlMc
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc7' into patchwork
Linux 4.20-rc7
* tag 'v4.20-rc7': (403 commits)
Linux 4.20-rc7
scripts/spdxcheck.py: always open files in binary mode
checkstack.pl: fix for aarch64
userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered
fs/iomap.c: get/put the page in iomap_page_create/release()
hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()
memblock: annotate memblock_is_reserved() with __init_memblock
psi: fix reference to kernel commandline enable
arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h
mm/sparse: add common helper to mark all memblocks present
mm: introduce common STRUCT_PAGE_MAX_SHIFT define
alpha: fix hang caused by the bootmem removal
XArray: Fix xa_alloc when id exceeds max
drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3
MAINTAINERS: Daniel for drm co-maintainer
drm/amdgpu: drop fclk/gfxclk ratio setting
IB/core: Fix oops in netdev_next_upper_dev_rcu()
dm thin: bump target version
drm/vmwgfx: remove redundant return ret statement
drm/i915: Flush GPU relocs harder for gen3
...
When a serial port continuously experiences input overrun from
(1) continuous receive characters from remote and or (2) hardware
issues, its interrupt handler can preempt other tasks especially
when the system is busy (ie. boot up period). This can cause other
tasks to get starved of processing time from the CPU.
When this dts binding is enabled and input overrun on the serial port
is detected, serial port receive will be throttled to give some breathing
room for processing other tasks. Value provided will be in milliseconds.
&serial0{
overrun-throttle-ms = <500>;
};
Signed-off-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add the HSIC support for imx
-----BEGIN PGP SIGNATURE-----
iQEwBAABCAAaBQJcF1bIExxwZXRlci5jaGVuQG54cC5jb20ACgkQSFkpgVDWcbv1
Xgf/RIlKRdLOiO0wCJWkmiHRIU/YE0V6QNwhMKCUK2PfAqLI3px/a/uOam7U8ysn
6TvrUYxy/V7yBDCw6bR8bbJeP5gFjZPEnqd4RV6YZzP7Zc6FJ/10cLMWWGfB61JV
xqcVzJGjZ/AuU00TDDEeKXnGB4w6iH47x0ywimxlHSEhSUGQEoogopgtlr8JfnWg
bVQ9wr1jkUmkDymVFaHzrYSWVIToejGOB2kNRmhGpxKIUq3Mv/X0Vux50+egNpDK
ikyVo5oIr1cU0nVlAl2lquoTf6F7gRo2GduY9stw2VR6VxUUvd2cj57bJlhiwqPe
3jRiXjWtZKsWEcSpMhaT8ks+Og==
=Q7/x
-----END PGP SIGNATURE-----
Merge tag 'usb-ci-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
- Improve the over-current handling for imx
- Add the HSIC support for imx
* tag 'usb-ci-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: chipidea: imx: allow to configure oc polarity on i.MX25
usb: chipidea: imx: Warn if oc polarity isn't specified
usb: chipidea: imx: support configuring for active low oc signal
doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups
usb: chipidea: host: override ehci->hub_control
usb: chipidea: imx: add HSIC support
usb: chipidea: add flag for imx hsic implementation
Qcom's implementation of arm,mmu-500 works well with current
arm-smmu driver implementation. Adding a soc specific compatible
along with arm,mmu-500 makes the bindings future safe.
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The driver fetches a thermal zone using the string "cpu_thermal" for
tuning operation. Add a note for the same.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 26a4f38d13 ("dt-bindings: mmc: sdhci-of-arasan: Add new
compatible for AM654 MMC PHY") added a new compatible for supporting
controllers on TI's AM65x SOCs. It turns out that the controller is
not compatible with the arasan driver's phy and consumer model as it
requires some phy registers for core sdhci functionality. This calls
for the binding to branch out to a new driver.
Therefore, add a deprecated message for the ti,am654-sdhci-5.1 binding.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In sdhci-msm-v5 and beyond, the MCI registers are removed, so there is only
one register region required.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document support for the RZ/A2 (R7S9210) SoC.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the description of the zoned, nr_zones and chunk_sectors sysfs queue
attributes to Documentation/block/queue-sysfs.txt. The description of
the zoned and chunk_sector attributes are mostly copied from
ABI/testing/sysfs-block (added a typo fix). While at it, also fix a
typo in the description of the io_poll_delay attribute.
nr_zones description is also added to ABI/testing/sysfs-block and
contact email address updated for the zoned attribute.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce SENSOR_DEVICE_ATTR_{RO,RW,WO} and SENSOR_DEVICE_ATTR_2_{RO,RW,WO}
as simplified variants of SENSOR_DEVICE_ATTR and SENSOR_DEVICE_ATTR_2 to
simplify the source code, improve readbility, and reduce the chance of
inconsistencies.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The STLM75 is a high-precision digital CMOS temperature sensor
IC with a sigma-delta temperature-to-digital converter.
The configuration register mapping is similar to existing lm75
but the sample rate is 150ms(max).
Tested on real hardware and verified temperature readings are correct.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The TI TMP451 temperature sensors are compatible with the National LM90
temperature sensors.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
These are Negative Temperature Coefficient thermistors, like the others
in the list.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There are a few sysfs entries being exposed to user space by the
ina2xx hwmon driver while not getting explicitly documented. So
this patch just adds a description section for them.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The tmp108 does have an alert output that can be used as interrupt source
and can of course also be used as part of a thermal sensor setup for things
like thermal-based cpu frequencies, so document the necessary properties.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add explainations for some general IP counters, SACK and DSACK related
counters
Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* clk-renesas:
clk: renesas: rcar-gen3: Add HS400 quirk for SD clock
clk: renesas: rcar-gen3: Add documentation for SD clocks
clk: renesas: rcar-gen3: Set state when registering SD clocks
clk: renesas: r8a77995: Simplify PLL3 multiplier/divider
clk: renesas: r8a77995: Add missing CPEX clock
clk: renesas: r8a77995: Remove non-existent SSP clocks
clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks
clk: renesas: r8a77995: Correct parent clock of DU
clk: renesas: r8a77990: Correct parent clock of DU
clk: renesas: r8a77970: Add CPEX clock
clk: renesas: r8a77965: Add CPEX clock
clk: renesas: r8a7796: Add CPEX clock
clk: renesas: r8a7795: Add CPEX clock
clk: renesas: r8a774a1: Add CPEX clock
dt-bindings: clock: r8a7796: Remove CSIREF clock
dt-bindings: clock: r8a7795: Remove CSIREF clock
clk: renesas: Mark rza2_cpg_clk_register static
clk: renesas: r7s9210: Add USB clocks
clk: renesas: r8a77970: Add RPC clocks
clk: renesas: r7s9210: Add SDHI clocks
* clk-allwinner:
clk: sunxi-ng: a64: Allow parent change for VE clock
clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks
clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: h3: Allow parent change for ve clock
clk: sunxi-ng: add support for suniv F1C100s SoC
dt-bindings: clock: Add Allwinner suniv F1C100s CCU
clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent
clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output
clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL
clk: sunxi-ng: a64: Fix gate bit of DSI DPHY
clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I
clk: sunxi-ng: Add support for H6 DE3 clocks
dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description
clk: sunxi-ng: h6: Set video PLLs limits
clk: sunxi-ng: Use u64 for calculation of NM rate
clk: sunxi-ng: Adjust MP clock parent rate when allowed
clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width
clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock
* clk-tegra:
clk: tegra: Return the exact clock rate from clk_round_rate
clk: tegra30: Use Tegra CPU powergate helper function
soc/tegra: pmc: Drop SMP dependency from CPU APIs
clk: tegra: Fix maximum audio sync clock for Tegra124/210
clk: tegra: get rid of duplicate defines
clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC
clk: tegra20: Turn EMC clock gate into divider
* clk-meson: (25 commits)
clk: meson: axg-audio: use the clk input helper function
clk: meson: add clk-input helper function
clk: meson: Mark some things static
clk: meson: meson8b: add the read-only video clock trees
clk: meson: meson8b: add the fractional divider for vid_pll_dco
clk: meson: meson8b: fix the offset of vid_pll_dco's N value
clk: meson: Fix GXL HDMI PLL fractional bits width
clk: meson: meson8b: add the CPU clock post divider clocks
clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3
clk: meson: clk-regmap: add read-only gate ops
clk: meson: meson8b: allow changing the CPU clock tree
clk: meson: meson8b: run from the XTAL when changing the CPU frequency
clk: meson: meson8b: add support for more M/N values in sys_pll
clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL
clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel
clk: meson: clk-pll: check if the clock is already enabled
clk: meson: meson8b: fix the width of the cpu_scale_div clock
clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table
clk: meson: meson8b: use the HHI syscon if available
dt-bindings: clock: meson8b: use the registers from the HHI syscon
...
* clk-rockchip:
clk: rockchip: add clock-id to gate of ACODEC for rk3328
clk: rockchip: add clock ID of ACODEC for rk3328
clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328
clk: rockchip: fix I2S1 clock gate register for rk3328
clk: rockchip: make rk3188 hclk_vio_bus critical
clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering
clk: rockchip: fix rk3188 sclk_smc gate data
clk: rockchip: fix typo in rk3188 spdif_frac parent
- NXP QorIQ T1023 SoC support
- Introduce a 'protected-clocks' binding for firmware protected clks
- Shrink code some with DEFINE_SHOW_ATTRIBUTE()
* clk-qoriq-t1023:
clk: qoriq: add more chips support
* clk-protected-binding:
clk: qcom: Support 'protected-clocks' property
dt-bindings: clk: Introduce 'protected-clocks' property
* clk-define-show-macro:
clk: tegra: Change to use DEFINE_SHOW_ATTRIBUTE macro
clk: nomadik: Change to use DEFINE_SHOW_ATTRIBUTE macro
* clk-static:
clk: stm32mp1: drop pointless static qualifier in stm32_register_hw_clk()
With every new Hyper-V Enlightenment we implement we're forced to add a
KVM_CAP_HYPERV_* capability. While this approach works it is fairly
inconvenient: the majority of the enlightenments we do have corresponding
CPUID feature bit(s) and userspace has to know this anyways to be able to
expose the feature to the guest.
Add KVM_GET_SUPPORTED_HV_CPUID ioctl (backed by KVM_CAP_HYPERV_CPUID, "one
cap to rule them all!") returning all Hyper-V CPUID feature leaves.
Using the existing KVM_GET_SUPPORTED_CPUID doesn't seem to be possible:
Hyper-V CPUID feature leaves intersect with KVM's (e.g. 0x40000000,
0x40000001) and we would probably confuse userspace in case we decide to
return these twice.
KVM_CAP_HYPERV_CPUID's number is interim: we're intended to drop
KVM_CAP_HYPERV_STIMER_DIRECT and use its number instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Before things go out of hand, make it possible to pass
flags when requesting "own" descriptors from a gpio_chip.
This is necessary if the chip wants to request a GPIO with
active low semantics, for example.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Roger Quadros <rogerq@ti.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds board specific bindings required for dais, In particular
for compressed dais and dai direction.
Board specific setup involves setting up some of dais as compressed dais
and also specify direction of any dai. Some of the dais might only
support capture/playback depending on the board level wiring.
These two new dt properties will allow such flexibilty at board level dts.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
simple-card and simple-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.
We couldn't use normal sound and DPCM sound in same time by
one sound card. This patch merges both sound card into
simple-card. Now we can use both feature on same driver.
simple-card is now supporting .compatible = "simple-scu-audio-card".
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card and audio-graph-scu-card are very similar driver,
but the former is supporting normal sound card,
the latter is supporting DPCM sound card.
We couldn't use normal sound and DPCM sound in same sound card by
audio-graph-card.
This patch merges both feature into it on Documentation.
Now we can use both feature on same driver.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two problems with KVM_GET_DIRTY_LOG. First, and less important,
it can take kvm->mmu_lock for an extended period of time. Second, its user
can actually see many false positives in some cases. The latter is due
to a benign race like this:
1. KVM_GET_DIRTY_LOG returns a set of dirty pages and write protects
them.
2. The guest modifies the pages, causing them to be marked ditry.
3. Userspace actually copies the pages.
4. KVM_GET_DIRTY_LOG returns those pages as dirty again, even though
they were not written to since (3).
This is especially a problem for large guests, where the time between
(1) and (3) can be substantial. This patch introduces a new
capability which, when enabled, makes KVM_GET_DIRTY_LOG not
write-protect the pages it returns. Instead, userspace has to
explicitly clear the dirty log bits just before using the content
of the page. The new KVM_CLEAR_DIRTY_LOG ioctl can also operate on a
64-page granularity rather than requiring to sync a full memslot;
this way, the mmu_lock is taken for small amounts of time, and
only a small amount of time will pass between write protection
of pages and the sending of their content.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the interface for metadata output, including
V4L2_BUF_TYPE_META_OUTPUT buffer type and V4L2_CAP_META_OUTPUT capability
bits.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Tested-by: Tian Shu Qiu <tian.shu.qiu@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The Low-Power Clock Gate (LPCG) modules contain a local programming
model to control the clock gates for the peripherals. An LPCG module
is used to locally gate the clocks for the associated peripheral.
Note:
This level of clock gating is provided after the clocks are generated
by the SCU resources and clock controls. Thus even if the clock is
enabled by these control bits, it might still not be running based
on the base resource.
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adding nvdimm key format type to encrypted keys in order to limit the size
of the key to 32bytes.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Two bugfixes, each with test-suite updates, two improvements to the
test-suite without associated bugs, and one patch adding a missing API.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlwS8ZUUHHdpbGx5QGlu
ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5h0wf9Fmc3z3WjmX05he+XKhGq1jQuHYVi
zt8Eggsc7ns1hX8xPdwSw240CDOCBcbXxCyNL9KFCqlIkfxTAe8pYgoTDKuXhVAK
U7VTCHCxJpsYzfhkEke5DaASGb/YP1kmvoTJs7qCfhBuI9ERXLVK6cESJNDZhlMA
/d7VfRwRiqSLnK13AXPZAA9Pnw2GtAolMDU9CC9nOtMRlRDVwsQiwYiQ/mBRYK00
u0LoruwBJ7XAoe7Bo1CFmkvJuIV794cmhqkEY2cY85e9aoj15+BDqOu1la8DTaOl
e7+7PwK1I6Ed6DfPixGleUP7BYHHXCfb/RVEYn22qGC/YHUQRtpbwrY37Q==
=b+pK
-----END PGP SIGNATURE-----
Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax
Pull XArray fixes from Matthew Wilcox:
"Two bugfixes, each with test-suite updates, two improvements to the
test-suite without associated bugs, and one patch adding a missing
API"
* tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax:
XArray: Fix xa_alloc when id exceeds max
XArray tests: Check iterating over multiorder entries
XArray tests: Handle larger indices more elegantly
XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh
radix tree: Don't return retry entries from lookup
Add some words about the mount option "smackfstransmute=label".
Signed-off-by: José Bollo <jobol@nonadev.net>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Access to GICR_WAKER is restricted on msm8996 SoC in Hypervisor.
There are many devices out there with this restriction in place
and there has been no update to this firmware since last few years,
making those devices totally unusable for upstream development.
IIDR register value conflicts with other SoCs, using compatible seems
to be the only way to apply quirks required for msm8996 based SoCs.
Without this quirk many qcom SoCs (atleast 3 that I know) are
unable to boot mainline.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Convert trivial-devices.txt to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The Brownstone board is compatible with "mrvl,mmp2". The actual DTS
already contains the string -- add it to the binding doc as well.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Tegra SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: devicetree@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ZTE SoC bindings to DT schema format using json-schema.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add missing description for Ultra96, zcu104, zcu106 and zcu111.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Xilinx SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert VIA SoC bindings to DT schema format using json-schema.
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ST STi SoC bindings to DT schema format using json-schema.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert CSR SiRF SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert QCom SoC bindings to DT schema format using json-schema.
Acked-by: Andy Gross <andy.gross@linaro.org>
Cc: David Brown <david.brown@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert TI NSpire SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert TI Davinci SoC bindings to DT schema format using json-schema.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Now that we've added code to support pointer authentication, add some
documentation so that people can figure out if/how to use it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Cc: Andrew Jones <drjones@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In the past, there have been words on various lists that if LDO3 is
disabled in u-boot, but enabled in the DTS, the axp209 driver would
fail to continue/hang. Several enable/disable patches have been
issues to devicetree's in both the kernel and u-boot to address
this issue.
What really happened however, was that the AXP209 shuts down without
a notice and without setting an interrupt. This is caused when LDO3
gets overloaded, for example with large capacitors on the LDO3 output.
Normally, we would expect that AXP209 would source 200 mA as per
datasheet and set and trigger an interrupt when being overloaded.
For some reason however, this does not happen.
As a work-around, implement software-based 'regulator-soft-start'
property for AXP209 LDO3 regulator, which is used to first bring up
the LDO3 to the lowest possible voltage and then enable the LDO.
After that, we can set the requested voltage as usual.
Combining this setting with the regulator-ramp-delay allows LDO3 to
come up slowly and staggered, potentially reducing overall inrush current.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The AXP209 supports ramping up voltages on several regulators such as
DCDC2 and LDO3, therefore we can use the standard 'regulator-ramp-delay'
property for those 2 regulators.
Note that the voltage ramp only works when the regulator is already
enabled. E.g. when going from say 0.7 V to 3.6 V.
When turning on the regulator, no voltage ramp is performed in hardware.
What this means, is that if the bootloader brings up the voltage at 0.7 V,
the ramp delay property is properly applied. If however, the bootloader
leaves the power off, no ramp delay is applied when the power is
enabled by the regulator framework.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Priit Laes <plaes@plaes.org>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert Calxeda SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Altera SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ARM Primecell binding to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert ARM timers to DT schema format using json-schema.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the i2c-gpio binding to DT schema format using json-schema. This
serves as an example of how to include other schema (i2c-controller.yaml
in this case).
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Altera clkmgr to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Add a how-to doc on writing DT schema documentation. This gives a
description of each section and details on how to validate the DT schema
file. The DT schema are written using json-schema vocabulary in a YAML
encoded document. Using jsonschema gives us access to existing tooling.
A YAML encoding gives us something easy to edit. The example is
annotated to help explain what each section does.
This example is just the tip of the iceberg, but is it the part most
developers writing bindings will interact with. Backing all this up
are meta-schema (to validate the binding schemas), some DT core schema,
YAML encoded DT output with dtc, and a small number of python scripts to
run validation.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the build infrastructure for checking DT binding schema
documents and validating dts files using the binding schema.
Check DT binding schema documents:
make dt_binding_check
Build dts files and check using DT binding schema:
make dtbs_check
Optionally, DT_SCHEMA_FILES can be passed in with a schema file(s) to
use for validation. This makes it easier to find and fix errors
generated by a specific schema.
Currently, the validation targets are separate from a normal build to
avoid a hard dependency on the external DT schema project and because
there are lots of warnings generated.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-doc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Added documentation for I2S IP core DT bindings.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Staging graduation
* ad2s90
- Driver for this resolver to digital chip.
New drivers and device support.
* ad5686
- Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
- Support for S5PV210 which is slightly different from other parts.
* mcp41010
- Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
MCP42100 microchip potentiometers.
New ACPI ids.
* ak8975
- AKM9911 ACPI HID.
* kxcjk-1013
- KXJ2109 ACPI HID.
- KIOX010A ACPI HID.
New features
* ad5933
- Explicit DT binding.
* ad2s90
- Explicit DT binding including dropping spi setup that is done via dt
in favour of verifying the settings form DT.
* adt7316
- Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
- Runtime power management.
Minor fixes and cleanups
* core
- Protect against missing info structure.
* ad2s90
- SPDX
- Add documentation fo the mutex.
* ad7280a
- Check allocation failure.
- Fix an accidental replacement of an error return.
* adt7316
- Switch some variables to be local and rename for consistency with other
drivers.
- Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
- Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
- White space cleanup.
* hts221
- MAINTAINERS entry.
* lis302
- Use generic name in the DT binding doc.
* Messon-saradc
- Check for allocation error.
- Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
- A fix for initialization of the prescale property. Came late in the
cycle, so merge window is probably the best route for this.
* st_lsm6dsx
- Allow for variable read length to support wider range of slave devices.
-----BEGIN PGP SIGNATURE-----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=+vyl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanups for the 4.21 cycle.
Staging graduation
* ad2s90
- Driver for this resolver to digital chip.
New drivers and device support.
* ad5686
- Add support for ad5310r DAC and associated fix in value read back.
* exynos-adc
- Support for S5PV210 which is slightly different from other parts.
* mcp41010
- Driver supporting MCP41010, MCP41050, MCP41100, MCP42010, MCP42050 and
MCP42100 microchip potentiometers.
New ACPI ids.
* ak8975
- AKM9911 ACPI HID.
* kxcjk-1013
- KXJ2109 ACPI HID.
- KIOX010A ACPI HID.
New features
* ad5933
- Explicit DT binding.
* ad2s90
- Explicit DT binding including dropping spi setup that is done via dt
in favour of verifying the settings form DT.
* adt7316
- Explicit DT binding and support for gpio, irq_flags etc.
* stm32-adc
- Runtime power management.
Minor fixes and cleanups
* core
- Protect against missing info structure.
* ad2s90
- SPDX
- Add documentation fo the mutex.
* ad7280a
- Check allocation failure.
- Fix an accidental replacement of an error return.
* adt7316
- Switch some variables to be local and rename for consistency with other
drivers.
- Revert a false handling of 0 as an error introduced earlier this cycle.
* bmi160
- Use devm functions throughout probe() to avoid need for remove().
* hid-sensor-hub
- White space cleanup.
* hts221
- MAINTAINERS entry.
* lis302
- Use generic name in the DT binding doc.
* Messon-saradc
- Check for allocation error.
- Fix some presented clock names that break clk debugfs.
* qcom-spmi-adc
- A fix for initialization of the prescale property. Came late in the
cycle, so merge window is probably the best route for this.
* st_lsm6dsx
- Allow for variable read length to support wider range of slave devices.
* tag 'iio-for-4.21b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (37 commits)
iio: adc: qcom-spmi-adc5: Initialize prescale properly
dt-bindings: iio: adc: exynos-adc: Add S5PV210 variant
iio: adc: Allow selection of Exynos ADC on S5PV210
iio: adc: exynos-adc: Add S5PV210 variant
iio: bmi160: use all devm functions in probe
iio: dac: ad5686: fix bit shift read register
iio:dac:ad5686: Add AD5310R support
Revert "Staging: iio: adt7316: Add an extra check for 'ret' equals to 0"
dt-bindings: iio: accel: use a generic node name for lis302
iio: core: check 'info' value before registering the device
staging: iio: adc: ad7280a: fix overwrite of the returned value
staging: iio: adc: ad7280a: check for devm_kasprint() failure
iio: humidity: hts221: add entry in MAINTAINERS file
iio: magnetometer: ak8975: Add the "AKM9911" ACPI HID
staging:iio:ad2s90: Move out of staging
staging:iio:ad2s90: Add comment to device state mutex
staging:iio:ad2s90: Replace license text w/ SPDX identifier
dt-bindings:iio:resolver: Add docs for ad2s90
staging:iio:ad2s90: Add max frequency check at probe
staging:iio:ad2s90: Remove spi setup that should be done via dt
...
This patch describes the compatible and the device tree
bindings necessary for the MCP16502 PMIC.
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the DT binding documentation for axg's SPDIF input.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatible string for Alwinner suniv F1C100s SoC interrupt
controller which is stripped version of sun4i
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-----BEGIN PGP SIGNATURE-----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=fz+k
-----END PGP SIGNATURE-----
Merge tag 'media/v4.20-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- one regression at vsp1 driver
- some last time changes for the upcoming request API logic and for
stateless codec support. As the stateless codec "cedrus" driver is at
staging, don't apply the MPEG controls as part of the main V4L2 API,
as those may not be ready for production yet.
* tag 'media/v4.20-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: Add a Kconfig option for the Request API
media: extended-controls.rst: add note to the MPEG2 state controls
media: mpeg2-ctrls.h: move MPEG2 state controls to non-public header
media: vicodec: set state resolution from raw format
media: vivid: drop v4l2_ctrl_request_complete() from start_streaming
media: vb2: don't unbind/put the object when going to state QUEUED
media: vb2: keep a reference to the request until dqbuf
media: vb2: skip request checks for VIDIOC_PREPARE_BUF
media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failed
media: cedrus: Fix a NULL vs IS_ERR() check
media: vsp1: Fix LIF buffer thresholds
The commit adds the device tree binding documentation for the MediaTek DWMAC
found on MediaTek MT2712.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two new metrics for CPU idle states, "above" and "below", to count
the number of times the given state had been asked for (or entered
from the kernel's perspective), but the observed idle duration turned
out to be too short or too long for it (respectively).
These metrics help to estimate the quality of the CPU idle governor
in use.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Convert Rockchip SoC bindings to DT schema format using json-schema.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
[move to per-board entries after confirming with Rob
and added recently added boards]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual pull request with the changes shared between the H3 and H5 SoCs.
The major changes for this release are:
- Addition of the video engine for the H5
- H3 Camera support
- New board: Emlid Neutis N5, Mapleboard MP130
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqJJwAKCRDj7w1vZxhR
xTq4AP9SxrPeKDTBD4mKV+PVuJ2qq919M6o+mcxDkCecEMfbagD+JLkt2uGzdpb8
eC6CuieHvJq1y/akfDpRBf0ZZD0/bw0=
=yRd0
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner H3/H5 changes for 4.21
Our usual pull request with the changes shared between the H3 and H5 SoCs.
The major changes for this release are:
- Addition of the video engine for the H5
- H3 Camera support
- New board: Emlid Neutis N5, Mapleboard MP130
* tag 'sunxi-h3-h5-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: Add Video Engine node
ARM/arm64: dts: allwinner: Move H3/H5 syscon label over to soc-specific nodes
arm64: dts: allwinner: h5: Add system-control node with SRAM C1
ARM: dts: sun8i: h3: Fix the system-control register range
ARM: dts: sun8i: Add the H3/H5 CSI controller
ARM: dts: sun8i-h3: Add dts for the Mapleboard MP130
arm64: dts: allwinner: new board - Emlid Neutis N5
dt-bindings: vendor-prefix: new vendor - Emlid
ARM: dts: sun8i-h3: add sy8106a to orange pi plus
Signed-off-by: Olof Johansson <olof@lixom.net>
A few patches to enable a new Allwinner SoC based on an armv5 CPU.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqCUwAKCRDj7w1vZxhR
xcmLAP9AuTgQD5JiKVImc5Vo3bmgUFY0Afu5+iivBIpqeH9NiwD/U5qjdZ+fvdVz
61l0nMXHL44JazTSI9K1br0roJmxpQA=
=HPpM
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc
Allwinner core changes for 4.21
A few patches to enable a new Allwinner SoC based on an armv5 CPU.
* tag 'sunxi-core-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
ARM: sunxi: add Allwinner ARMv5 SoCs
dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs
Signed-off-by: Olof Johansson <olof@lixom.net>
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDbkEAAoJEFBXWFqHsHzO1C4H/05Khi/tWF6xZNMw7C4Q6wf6
WIFhB73tTLxZ8W0n8gIS+Y2YKFw6+dy8J/ZpkFBpe+f6rqVsyTzUvGB+6Ii3Nomu
V2juCn8XaHfv32FfaPBCelnitcpgFrnEvXYS6u8mSEt1DSu8rK2y2yMcnrkdcurq
Jy9eAYjUrdXYGsH9uw36mco7q25I5wSnXOLzZ0SLXSqB//a9YlzPKGRmQqF0uQ3t
K8uT5PwqEBrjNAP6sTvSzMf6vSeXD5MGqrEvd/LnGp6IPwx7R+z4Y+HUw/RtTIdg
rP1hAt3PLDD7Ibk+GHH5q/M2+9fI2dn2y44JXGOlQvqdmoLVg1vCpTLEj8OioFU=
=/3Mg
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers change for 4.21:
- A series from Aisheng that improves SCU power domain bindings by
defining '#power-domain-cells' as 1, and adds i.MX8 SCU power domain
driver support on top of it.
- A series from Lucas that updates gpcv2 driver for scalability and
adds i.MX8MQ support into the driver.
- Increase gpc driver GPC_CLK_MAX definition to 7, as DISPLAY power
domain on imx6sx has 7 clocks.
* tag 'imx-drivers-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
firmware: imx: add SCU power domain driver
firmware: imx: add pm svc headfile
dt-bindings: fsl: scu: update power domain binding
firmware: imx: remove resource id enums
dt-bindings: imx: add scu resource id headfile
Signed-off-by: Olof Johansson <olof@lixom.net>
Those patches are all about our SRAM driver, to enable new SoCs: the
F1c100s, the H5 and the A64 C1 SRAM, that is used by the video decoding
engine.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqDmQAKCRDj7w1vZxhR
xQxsAPwMd/pS6L2+mRZuBrog4P4PHSHO4cSY76YpYanjygNh6AEAm/IfGtiHaFwe
A4Mjtwmw7Rg/HmvETBlgGLE7aAHppw8=
=UHav
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drivers-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers
Allwinner drivers changes for 4.21
Those patches are all about our SRAM driver, to enable new SoCs: the
F1c100s, the H5 and the A64 C1 SRAM, that is used by the video decoding
engine.
* tag 'sunxi-drivers-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: sunxi: Change to use DEFINE_SHOW_ATTRIBUTE macro
Signed-off-by: Olof Johansson <olof@lixom.net>
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAlwQw64QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgRFJB/0WHQQtzWXEtFYxgaoWFAgkK8/Lq2LxDBTa
aMx+slPBqMEpLOP3jfxHRy4C+dL2GX2LgaHPJN1ImwSEjUAfPsfO47LNUBl4w0Sx
t2ulAX/TC4wz5Wa78NsGxaszHgpxmDTYeO7ue1nYJ13YlJZ2MIp/Nr9903rWve6h
hPSzkUVe4Vuiz+KLXchzkRWS13zVhy0t9FyPyhJqzZ4ESDhS74g6cm6wuUB0XHXS
EHvhSvgdMa8x1/2flEIXGUAScAWydiglZcraNr3LmrN6dG8PS/IhbGsxp5KCzMTZ
DAGR47tpbXQ1N5HZEqk30yiYMDN/cNeeo2wF9nR9Df//Bj/AwnI6
=A+kY
-----END PGP SIGNATURE-----
Merge tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
RV1108 improvements (uart-dma, clocks, interrupt numbers, gmac support
timer and emmc pins) from its first real-world user.
RK3188 improvements (OPPv2, cpu node updates) to prepare for a new
devicetree, the BQ Edison 2 Quad-Core.
VPU device node for rk3288, right now only the jpeg encoder part
will be in the kernel but hopefully other codecs will follow.
* tag 'v4.21-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add internal timer support for rv1108
ARM: dts: rockchip: add BQ Edison 2 QC devicetree
ARM: dts: rockchip: add VPU device node for RK3288
ARM: dts: rockchip: update cpu supplies on rk3188
ARM: dts: rockchip: add phandles to secondary cpu cores
ARM: dts: rockchip: add cpu-core resets for rk3188
ARM: dts: rockchip: convert rk3188 to opp-v2
ARM: dts: rockchip: add #sound-dai-cells to Cortex-A9 i2s
ARM: dts: rockchip: Add UART DMA support for rv1108
ARM: dts: rockchip: Assign the proper GPIO clocks for rv1108
ARM: dts: rockchip: Fix the PMU interrupt number for rv1108
ARM: dts: rockchip: Pass the 'arm,cpu-registers-not-fw-configured' property on rv1108
ARM: dts: rockchip: Pass the 'clock-latency' property on rv1108
ARM: dts: rockchip: Add rv1108 GMAC support
ARM: dts: rockchip: add rv1108 eMMC pin settings
Signed-off-by: Olof Johansson <olof@lixom.net>
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDd7aAAoJEFBXWFqHsHzOgNEIAKc4dqYzWmfJTMnJGO+Bb1Rc
BPkENpRWk6rWVBuxXwN4MTupXIgj96bBHWsg3kplgcthMRAl2wgomHTpNWXk8R9m
Fn6sH9yIoeqr+xs6BzzQ8COrFBXg8CEZgKLgy+9nhfFi3xNf6pN6IQLgqrGF17MC
zFH+sM0rqlh1l3BfHXMuwHvbhw+ms6Qo6z68OGSXmu0bUPThm2FV/Akivqp+INSI
CeFyZ8RMTkEKVSkFEryZaprKgqlIYW2Kl54yeALjvG03mtn1onaZKqsNV7YonYMC
X+mZPLnwjBUnLi2HbKrStmTR0ePQjg5x1tMT+Eco7Cjj4h6H6uBu0IYMi4PiN7o=
=aOId
-----END PGP SIGNATURE-----
Merge tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX7ULP device tree for 4.21:
- It includes the initial device tree for i.MX7ULP SoC and EVK board
support.
* tag 'imx7ulp-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: add imx7ulp evk support
ARM: dts: imx: add common imx7ulp dtsi support
dt-bindings: fsl: add imx7ulp pm related components bindings
dt-bindings: fsl: add compatible for imx7ulp evk
clk: imx: add imx7ulp clk driver
clk: imx: implement new clk_hw based APIs
clk: imx: make mux parent strings const
dt-bindings: clock: add imx7ulp clock binding doc
clk: imx: add imx7ulp composite clk support
clk: imx: add pfdv2 support
clk: imx: add pllv4 support
clk: fractional-divider: add CLK_FRAC_DIVIDER_ZERO_BASED flag support
clk: imx: add gatable clock divider support
Signed-off-by: Olof Johansson <olof@lixom.net>
- New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
- Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
for flexcan, and enable devices on a few i.MX6 NXP boards.
- Enable AUO G101EVN010 lcd panel and Goodix touch support for
imx6ul-ccimx6ulsbcpro board.
- Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
magnetometer and accelerometer sensor.
- Switch more boards to use SPDX identifier.
- Fix memory node duplication in i.MX device tree sources.
- Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
- Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
incorrect device matching.
- Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
are now supported by the freedreno driver.
- Add DCP device support for i.MX6ULL, which requires explicit clock
enabling.
- Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
for cooling devices.
- Add missing clock information for EPIT on i.MX25 SoC.
- Add PWM and qdma devices for LS1021A SoC.
- Update cooling maps of LS1021A SoC to include all devices affected by
individual trip points.
- Random device addition and cleanup on various boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcDcmeAAoJEFBXWFqHsHzO9uIH/2e87ayMkmIugUt57aJUOWRG
pbNZZQXHsupVVu0VtYnKp3XBuhMXzvbhhihn9x9pyV+EJ2V4dgtU6gS2EDH2G9pl
TCJItVDOZgllamIg2/McVkuQLsH8tEybud4wlWve96eP22mn6CyCPiDtmdvKYigA
QQEFeSI8YgG1VLbXmhmox0HcowOm2C8asw8sSuo15Y2tWjAcCzKK0p3izRJQhSWn
G/uAUwQQB7e2zrTXfTiJpMWEt664C0tqlhZLlfaPpvmufIbDcpbLHp7mK3iW0rZA
Pjr1uT00rpnRkPkLvtT6tKTi2KviCwua1R58aUXW3ju1Fw6DJC1vSuPyNClCuyk=
=dGG8
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree update for 4.21:
- New boards support: emtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
and vf610 based Liebherr's BK4 device, ZII SCU4 AIB board.
- Add flexcan support for i.MX6UL SoC, turn on stop mode wakeup feature
for flexcan, and enable devices on a few i.MX6 NXP boards.
- Enable AUO G101EVN010 lcd panel and Goodix touch support for
imx6ul-ccimx6ulsbcpro board.
- Enable sensors support for imx6qdl-sabresd board: egalax touch, light,
magnetometer and accelerometer sensor.
- Switch more boards to use SPDX identifier.
- Fix memory node duplication in i.MX device tree sources.
- Correct GIC PPI interrupts mask for i.MX6UL and i.MX7 SoCs.
- Drop 'snps,dw-pcie' compatible from LS1021A PCIe device to avoid
incorrect device matching.
- Add the gpu nodes for the adreno 200 GPU on iMX51 and iMX53, which
are now supported by the freedreno driver.
- Add DCP device support for i.MX6ULL, which requires explicit clock
enabling.
- Add '#thermal-sensor-cells' for thermal device and '#cooling-cells'
for cooling devices.
- Add missing clock information for EPIT on i.MX25 SoC.
- Add PWM and qdma devices for LS1021A SoC.
- Update cooling maps of LS1021A SoC to include all devices affected by
individual trip points.
- Random device addition and cleanup on various boards.
* tag 'imx-dt-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (82 commits)
ARM: dts: imx51-zii-rdu1: Do not specify "power-gpio" for hpa1
ARM: dts: imx6ul: Remove extra space between node name and brace
ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators
ARM: dts: imx6ul: add flexcan support
ARM: dts: imx5: add gpu nodes
ARM: dts: imx6qdl-sabresd: add accelerometer sensor support
ARM: dts: imx6qdl-sabresd: add magnetometer sensor support
ARM: dts: imx6qdl-sabresd: add light sensor support
ARM: dts: imx6qdl-sabresd: Move regulators outside of "simple-bus"
ARM: dts: imx6qdl: Fix memory node duplication
ARM: dts: imx6dl-mamoj: Add a memory node
ARM: dts: imx53-voipac-dmm-668: Fix memory node duplication
ARM: dts: vf610-zii-scu4-aib: Add HI8435 support
ARM: dts: imx6qdl-sabresd: add egalax touch screen support on i2c2 bus
ARM: dts: imx7s: Add flexcan stop mode wakeup support
ARM: dts: imx6ul: Add flexcan stop mode wakeup support
ARM: dts: imx6qdl: Add flexcan stop mode wakeup support
ARM: dts: imx6sx: Add flexcan stop mode wakeup support
ARM: dts: imx6ul-pico: Add the imx6ul-pico-pi variant
ARM: dts: imx6ul-pico-hobbit: Extend peripherals support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqGvQAKCRDj7w1vZxhR
xeObAQDZGMVjFjiWlC0jYjBQoCHMf1dlu6iPd4qe8h3GS1XUVQD/c8SJaMj5oLX1
HKjtqQD+sJRUQdcWlwAsqEEKyKUhfQs=
=aAr3
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner arm64 DT changes for 4.21
Our usual set of arm64 DT changes, with the biggest additions being:
- Support for the video decoding engine in the A64
- Support for the audio codec in the A64
- USB Support in the H6
- HDMI Support in the H6
- EMAC Support in the H6
- New board: Orange Pi Lite2
* tag 'sunxi-dt64-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (27 commits)
arm64: dts: allwinner: a64: Fix up RTC device node and clock references
arm64: dts: allwinner: a64: Add Video Engine node
arm64: dts: allwinner: a64: Add support for the SRAM C1 section
arm64: dts: allwinner: a64: pinebook: enable power supplies
arm64: dts: allwinner: a64: sopine-baseboard: enable power supplies
arm64: dts: allwinner: axp803: add AC and battery power supplies
arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec
arm64: dts: allwinner: a64: enable sound on Pinebook
arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine
arm64: dts: allwinner: a64: add nodes necessary for analog sound support
arm64: dts: allwinner: h6: orangepi: Add device nodes for LEDs
arm64: dts: allwinner: h6: orangepi: Enable USB 2.0 host and OTG ports
arm64: dts: allwinner: h6: orangepi: Add board-wide 5V regulator
arm64: dts: allwinner: h6: fix EMAC compatible string sequence
arm64: dts: allwinner: a64: Add device node for Mali-400 GPU
dt-bindings: gpu: mali-utgard: Add compatible for A64 Mali
arm64: dts: allwinner: h6: enable USB2 on Pine H64
arm64: dts: allwinner: h6: add USB Vbus regulator for Pine H64
arm64: dts: allwinner: h6: add USB2-related device nodes
arm64: dts: allwinner: h6: Enable HDMI output on Pine H64 board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXAqFhwAKCRDj7w1vZxhR
xcQzAQDJu0dPrs3SQlWdDhOa0iFVp/7gmN4iRMxMScIIjrRUgAEAzmhUjQNNTNLc
OPF9XzMdT12rs2SAbk2XXtWH1hN8KQA=
=vSCG
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.21
This is a quite big pull request this time, with a huge number of changes
(and patches) due to us fixing the vast majority of the DTC warnings our DT
had.
We also have a bunch of other good, more meaningful, changes:
- Support for the new Allwinner T3 (rebranded R40) and f1c100s (armv5)
SoCs
- AXP803 PMIC AC Power supply support
- Rework of the oscillators tree
- Two new boards: the t3-cqa3t-bv3 and Lichee Pi Nano
Plus a few enhancements here and there.
* tag 'sunxi-dt-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (84 commits)
ARM: dts: sunxi: Fix PMU compatible strings
ARM: dts: sun8i: r40: Add RTC device node
ARM: dts: sunxi: h3/h5: Fix up RTC device node and clock references
ARM: dts: sun8i: a23/a33: Fix up RTC device node
ARM: dts: sun8i: r40: Add clock accuracy for external oscillators
ARM: dts: sunxi: h3/h5: Add clock accuracy for external oscillators
ARM: dts: sun8i: a33: Drop audio codec oversampling rate to 128 fs
ARM: dts: sun8i: h3: Remove unnecessary reserved memory node
ARM: dts: sun8i: a33: Remove unnecessary reserved memory node
ARM: dts: suniv: Add device tree for Lichee Pi Nano
ARM: dts: suniv: add initial DTSI file for F1C100s
ARM: dts: axp81x: add AC power supply subnode
ARM: dts: sun8i: v3s: Remove skeleton and memory to avoid warnings
ARM: dts: sun8i: v3s: Provide default muxing for relevant controllers
ARM: dts: sun8i: v3s: Change pinctrl nodes to avoid warning
ARM: dts: sun8i: v3s: Change LRADC node names to avoid warnings
ARM: dts: sun8i: h3: Remove leading zeros from unit-addresses
ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
ARM: dts: sun8i: a23/a33: Provide default muxing for relevant controllers
ARM: dts: sunxi: reference: Move the muxing back to the common DTSI
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Add information about new compatible for S5PV210
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for regulator modes and suspend states.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the bindings.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
So it looks like folks are interested in dwc3 again. Almost 64% of the
changes are in dwc3 this time around with some other bits in gadget
functions and dwc2.
There are two important parts here: a. removal of the waitqueue from
dwc3's dequeue implementation, which will guarantee that gadget
functions can dequeue from any context and; b. better method for
starting isochronous transfers to avoid, as much as possible, missed
isoc frames.
Apart from these, we have the usual set of non-critical fixes and new
features all over the place.
-----BEGIN PGP SIGNATURE-----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=n8VS
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB changes for v4.21
So it looks like folks are interested in dwc3 again. Almost 64% of the
changes are in dwc3 this time around with some other bits in gadget
functions and dwc2.
There are two important parts here: a. removal of the waitqueue from
dwc3's dequeue implementation, which will guarantee that gadget
functions can dequeue from any context and; b. better method for
starting isochronous transfers to avoid, as much as possible, missed
isoc frames.
Apart from these, we have the usual set of non-critical fixes and new
features all over the place.
* tag 'usb-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (56 commits)
usb: dwc2: Fix disable all EP's on disconnect
usb: dwc3: gadget: Disable CSP for stream OUT ep
usb: dwc2: disable power_down on Amlogic devices
Revert "usb: dwc3: pci: Use devm functions to get the phy GPIOs"
USB: gadget: udc: s3c2410_udc: convert to DEFINE_SHOW_ATTRIBUTE
usb: mtu3: fix dbginfo in qmu_tx_zlp_error_handler
usb: dwc3: trace: add missing break statement to make compiler happy
usb: dwc3: gadget: Report isoc transfer frame number
usb: gadget: Introduce frame_number to usb_request
usb: renesas_usbhs: Use SIMPLE_DEV_PM_OPS macro
usb: renesas_usbhs: Remove dummy runtime PM callbacks
usb: dwc2: host: use hrtimer for NAK retries
usb: mtu3: clear SOFTCONN when clear USB3_EN if work as HS mode
usb: mtu3: enable SETUPENDISR interrupt
usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)
usb: mtu3: enable hardware remote wakeup from L1 automatically
usb: mtu3: remove QMU checksum
usb/mtu3: power down device ip at setup
usb: dwc2: Disable power down feature on Samsung SoCs
usb: dwc3: Correct the logic for checking TRB full in __dwc3_prepare_one_trb()
...
*) Change phy set_mode ops to take both mode and setmode as arguments
*) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY
*) Add helpers to get default values of parameters define in MIPI D-PHY spec
*) Add driver for TI's CPSW Port PHY Interface Mode selection
*) Add driver for Cadence Sierra PHY used with USB and PCIe
*) Add driver for Freescale i.MX8MQ USB3 PHY
*) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be
pointed at in device tree
*) Fix for using fully specified regions (in device tree) for configuring
the second lane in dual lane PHYs in QMP PHY
*) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver
*) Update phy-rcar-gen3-usb driver to follow the hardware manual
*) Add support for fine grained power management in mapphone-mdm6600 driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=JLIJ
-----END PGP SIGNATURE-----
Merge tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes:
phy: for 4.21
*) Change phy set_mode ops to take both mode and setmode as arguments
*) Add phy_configure() and phy_validate() API's mostly used for MIPI D-PHY
*) Add helpers to get default values of parameters define in MIPI D-PHY spec
*) Add driver for TI's CPSW Port PHY Interface Mode selection
*) Add driver for Cadence Sierra PHY used with USB and PCIe
*) Add driver for Freescale i.MX8MQ USB3 PHY
*) Fixes QMP PHY bindings to allow the clocks provided by the PHY to be
pointed at in device tree
*) Fix for using fully specified regions (in device tree) for configuring
the second lane in dual lane PHYs in QMP PHY
*) Add support for Allwinner H6 USB2 PHY in phy-sun4i-usb driver
*) Update phy-rcar-gen3-usb driver to follow the hardware manual
*) Add support for fine grained power management in mapphone-mdm6600 driver
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-4.21_v1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits)
phy: qcom-qmp: Expose provided clocks to DT
dt-bindings: phy-qcom-qmp: Move #clock-cells to child
phy: qcom-qmp: Utilize fully-specified DT registers
dt-bindings: phy-qcom-qmp: Fix register underspecification
phy: ti: fix semicolon.cocci warnings
phy: dphy: Add configuration helpers
phy: Add MIPI D-PHY configuration options
phy: Add configuration interface
phy: Add MIPI D-PHY mode
phy: add driver for Freescale i.MX8MQ USB3 PHY
dt-bindings: phy: add binding for Freescale i.MX8MQ USB3 PHY
phy: Use of_node_name_eq for node name comparisons
net: ethernet: ti: cpsw: add support for port interface mode selection phy
dt-bindings: net: ti: cpsw: switch to use phy-gmii-sel phy
phy: ti: introduce phy-gmii-sel driver
dt-bindings: phy: add cpsw port interface mode selection phy bindings
phy: mvebu-cp110-comphy: fix spelling in structure name
phy: mapphone-mdm6600: Improve phy related runtime PM calls
phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure
phy: cadence: Add driver for Sierra PHY
...
The phy-qcom-qmp bindings specified #clock-cells as 1. This was never used
because of_clk_add_provider() was never called, so there was no way anybody
could reference these clocks from DT. Furthermore, even if they could be
accessed, the bindings never specified what should go in that additional
cell.
Fix these incomplete and broken bindings. Move the #clock-cells into the
child node, since that is the actual clock provider, and not all
instances of qcom-qmp-phy are clock providers. Also set #clock-cells to
zero, since there's nothing to pass to it.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add register regions for the second lane of dual-lane nodes.
This additional specification is needed so that the driver can stop
reaching beyond the tx and rx register allocations to get at the
second lane registers in a dual-lane PHY.
While in there, document #clock-cells as optional for PHYs that don't
provide a pipe clock. Also, document the pcs_misc register region, which
was being quietly supplied and used.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This adds the binding for the USB3 PHY found on the i.MX8M SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The cpsw-phy-sel driver was replaced with new PHY driver phy-gmii-sel, so
deprecate cpsw-phy-sel bindings and update CPSW binding to use phy-gmii-sel
PHY bindings.
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Add DT binding documentation for Sierra PHY. The PHY supports
a number of different protocols, including PCIe and USB.
The PHY lanes may be configured as single or multi-lane links.
Each link is treated as a separate sub-node. For example, if
there are 4 lanes in total the first 2 might be configured as
a multi-lane PCIe link while the other two are single lane
USB links, and in this case there would be 3 sub-nodes.
There are two resets for the PHY block (one for APB register
access, one for the PHY link) and separate resets for each
link. For multi-lane links, the reset corresponds to the
reset line on the master lane, the resets on other lanes
have no effect.
Signed-off-by: Alan Douglas <adouglas@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
The USB2.0 PHY on Allwinner H6 is similar to the ones on the ones on
older SoCs, but with holes in PHY number (USB1 and USB2 are missing, in
which USB1 is a USB3 PHY).
Add binding for the PHY.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This patch introduces a means for syscalls matched in seccomp to notify
some other task that a particular filter has been triggered.
The motivation for this is primarily for use with containers. For example,
if a container does an init_module(), we obviously don't want to load this
untrusted code, which may be compiled for the wrong version of the kernel
anyway. Instead, we could parse the module image, figure out which module
the container is trying to load and load it on the host.
As another example, containers cannot mount() in general since various
filesystems assume a trusted image. However, if an orchestrator knows that
e.g. a particular block device has not been exposed to a container for
writing, it want to allow the container to mount that block device (that
is, handle the mount for it).
This patch adds functionality that is already possible via at least two
other means that I know about, both of which involve ptrace(): first, one
could ptrace attach, and then iterate through syscalls via PTRACE_SYSCALL.
Unfortunately this is slow, so a faster version would be to install a
filter that does SECCOMP_RET_TRACE, which triggers a PTRACE_EVENT_SECCOMP.
Since ptrace allows only one tracer, if the container runtime is that
tracer, users inside the container (or outside) trying to debug it will not
be able to use ptrace, which is annoying. It also means that older
distributions based on Upstart cannot boot inside containers using ptrace,
since upstart itself uses ptrace to monitor services while starting.
The actual implementation of this is fairly small, although getting the
synchronization right was/is slightly complex.
Finally, it's worth noting that the classic seccomp TOCTOU of reading
memory data from the task still applies here, but can be avoided with
careful design of the userspace handler: if the userspace handler reads all
of the task memory that is necessary before applying its security policy,
the tracee's subsequent memory edits will not be read by the tracer.
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
CC: Kees Cook <keescook@chromium.org>
CC: Andy Lutomirski <luto@amacapital.net>
CC: Oleg Nesterov <oleg@redhat.com>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: "Serge E. Hallyn" <serge@hallyn.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
CC: Christian Brauner <christian@brauner.io>
CC: Tyler Hicks <tyhicks@canonical.com>
CC: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
The "at," prefix was never correct for Atmel, so fix the few occurrences
that got it wrong. Use "atmel," instead.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Peter Rosin <peda@axentia.se>
[wsa: merged two patches into one, dropped 'trivial-devices' hunk which
needs to go in seperately]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add support for the internal timer peripheral on RV1108.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Allow the PHY drivers to get the ref clock from the DT.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Document the new amd,imageon compatible, used for non-qcom hardware that
uses the drm/msm driver (iMX5).
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This allows controlling which of the 8 lanes are used for 6 bit color.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
-----BEGIN PGP SIGNATURE-----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=3PUd
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
dt-bindings: Changes for v4.21-rc1
This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.
* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: tegra186-pmc: Add interrupt controller properties
dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
dt: bindings: Move tegra20-emc binding to memory-controllers directory
dt: bindings: tegra20-emc: Document clock property
dt: bindings: tegra20-emc: Document interrupt property
dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
-----BEGIN PGP SIGNATURE-----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=BGWx
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Renesas ARM Based SoC DT Bindings Updates for v4.21
* Move 'renesas,prr' binding to its own document
- Prepration for converting board-level bindings to json-schema
* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM
* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix typos, spellos, and grammar in p2pdma.rst and p2pdma.c.
Fix return value(s) in function pci_p2pmem_alloc_sgl().
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Jonathan Corbet <corbet@lwn.net>
DMA debug entries are one of those things which aren't that useful
individually - we will always want some larger quantity of them - and
which we don't really need to manage the exact number of - we only care
about having 'enough'. In that regard, the current behaviour of creating
them one-by-one leads to a lot of unwarranted function call overhead and
memory wasted on alignment padding.
Now that we don't have to worry about freeing anything via
dma_debug_resize_entries(), we can optimise the allocation behaviour by
grabbing whole pages at once, which will save considerably on the
aforementioned overheads, and probably offer a little more cache/TLB
locality benefit for traversing the lists under normal operation. This
should also give even less reason for an architecture-level override of
the preallocation size, so make the definition unconditional - if there
is still any desire to change the compile-time value for some platforms
it would be better off as a Kconfig option anyway.
Since freeing a whole page of entries at once becomes enough of a
challenge that it's not really worth complicating dma_debug_init(), we
may as well tweak the preallocation behaviour such that as long as we
manage to allocate *some* pages, we can leave debugging enabled on a
best-effort basis rather than otherwise wasting them.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
dma-debug is now capable of adding new entries to its pool on-demand if
the initial preallocation was insufficient, so the IOMMU_LEAK logic no
longer needs to explicitly change the pool size. This does lose it the
ability to save a couple of megabytes of RAM by reducing the pool size
below its default, but it seems unlikely that that is a realistic
concern these days (or indeed that anyone is actively debugging AGP
drivers' DMA usage any more). Getting rid of dma_debug_resize_entries()
will make room for further streamlining in the dma-debug code itself.
Removing the call reveals quite a lot of cruft which has been useless
for nearly a decade since commit 19c1a6f576 ("x86 gart: reimplement
IOMMU_LEAK feature by using DMA_API_DEBUG"), including the entire
'iommu=leak' parameter, which controlled nothing except whether
dma_debug_resize_entries() was called or not.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Now that we can dynamically allocate DMA debug entries to cope with
drivers maintaining excessively large numbers of live mappings, a driver
which *does* actually have a bug leaking mappings (and is not unloaded)
will no longer trigger the "DMA-API: debugging out of memory - disabling"
message until it gets to actual kernel OOM conditions, which means it
could go unnoticed for a while. To that end, let's inform the user each
time the pool has grown to a multiple of its initial size, which should
make it apparent that they either have a leak or might want to increase
the preallocation size.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Certain drivers such as large multi-queue network adapters can use pools
of mapped DMA buffers larger than the default dma_debug_entry pool of
65536 entries, with the result that merely probing such a device can
cause DMA debug to disable itself during boot unless explicitly given an
appropriate "dma_debug_entries=..." option.
Developers trying to debug some other driver on such a system may not be
immediately aware of this, and at worst it can hide bugs if they fail to
realise that dma-debug has already disabled itself unexpectedly by the
time their code of interest gets to run. Even once they do realise, it
can be a bit of a pain to emprirically determine a suitable number of
preallocated entries to configure, short of massively over-allocating.
There's really no need for such a static limit, though, since we can
quite easily expand the pool at runtime in those rare cases that the
preallocated entries are insufficient, which is arguably the least
surprising and most useful behaviour. To that end, refactor the
prealloc_memory() logic a little bit to generalise it for runtime
reallocations as well.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Expose nr_total_entries in debugfs, so that {num,min}_free_entries
become even more meaningful to users interested in current/maximum
utilisation. This becomes even more relevant once nr_total_entries
may change at runtime beyond just the existing AMD GART debug code.
Suggested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Extend the documentation for trusted keys with documentation for how to
set up a key for a TPM 2.0 so it can be used with a TPM 2.0 as well.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Add cpuidle.governor= command line parameter to allow the default
cpuidle governor to be replaced.
That is useful, for example, if someone running a tickful kernel
wants to use the menu governor on it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Swap storage is restricted to max_swapfile_size (~16TB on x86_64) whenever
the system is deemed affected by L1TF vulnerability. Even though the limit
is quite high for most deployments it seems to be too restrictive for
deployments which are willing to live with the mitigation disabled.
We have a customer to deploy 8x 6,4TB PCIe/NVMe SSD swap devices which is
clearly out of the limit.
Drop the swap restriction when l1tf=off is specified. It also doesn't make
much sense to warn about too much memory for the l1tf mitigation when it is
forcefully disabled by the administrator.
[ tglx: Folded the documentation delta change ]
Fixes: 377eeaa8e1 ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: <linux-mm@kvack.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181113184910.26697-1-mhocko@kernel.org
The Intel vt-d spec rev3.0 introduces a new translation
mode called scalable mode, which enables PASID-granular
translations for first level, second level, nested and
pass-through modes. At the same time, the previous
Extended Context (ECS) mode is deprecated (no production
ever implements ECS).
This patch adds enumeration for Scalable Mode and removes
the deprecated ECS enumeration. It provides a boot time
option to disable scalable mode even hardware claims to
support it.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add documentation for the new attributes for systems of type MQM87xx,
MSN34xx, MSN37xx. It includes the attributes related to ComEx resets,
system platform reset, JTAG interface enabling, additional CPLD device.
All the above system are equipped with ComEX board, have JTAG selector
and extra CPLD.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
[dvhart: Change kernel version from 5.0 to 4.21 until we know for sure]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The status quo on i.MX6 is that if "over-current-active-high" is
specified in the device tree this is configured as expected. If
the property is missing polarity isn't changed and so the
polarity is kept as setup by the bootloader. Reset default is
active high, so active low can only be used with help by the
bootloader. On i.MX7 it is similar, but there disabling of
over current detection has a similar inconsistency.
This patch introduces a new property that allows to explicitly
configure for active low over current detection and consistently
sets this up. In the absence of an explicit configuration the
bit is kept as is. On i.MX7 over current detection is used unless
disabled in the device tree.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
For USB HSIC, the data and strobe pin needs to be pulled down
at default, we consider it as "idle" state. When the USB host
is ready to be used, the strobe pin needs to be pulled up,
we consider it as "active" state.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
This adds a function named devm_gpiod_unhinge() that removes
the resource management from a GPIO descriptor.
I am not sure if this is the best anglosaxon name for the
function, no other managed resources have an equivalent
currently, but I chose "unhinge" as the closest intuitive
thing I could imagine that fits Rusty Russell's API design
criterions "the obvious use is the correct one" and
"the name tells you how to use it".
The idea came out of a remark from Mark Brown that it should
be possible to handle over management of a resource from
devres to the regulator core, and indeed we can do that.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The pcf85263 RTC is compatible with the pcf85363 RTC.
The difference between the pcf85263 and pcf85363 RTC is that the latter has
64 bytes more RAM. This renders them incompatible from a DT point of view.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There are users which print time and date represented by content of
struct rtc_time in human readable format.
Instead of open coding that each time introduce %ptR[dt][r] specifier.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add optional reset GPIO, as such a signal is available on the KSZ switches.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Woojung Huh <Woojung.Huh@microchip.com>
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When specifying external clock inputs to the CCM the current code
requires the clocks to be in a "clocks" child node of the DT root.
This is not really conformant with DT best practices.
To avoid the need to deviate from those best practices, allow the
clock inputs to be specified via standard clock handles. This is
in line with how drivers of the later CCM driver revisions on
newer i.MX SoCs handle this.
As we can't retroactively change the DT binding, allow this as an
option with a fallback to the old way of how this has been handled.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add new compatible to the device tree bindings.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-----BEGIN PGP SIGNATURE-----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=tqRs
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into char-misc-next
Mika writes:
thunderbolt: Changes for v4.21 merge window
* tag 'thunderbolt-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Export IOMMU based DMA protection support to userspace
iommu/vt-d: Do not enable ATS for untrusted devices
iommu/vt-d: Force IOMMU on for platform opt in hint
PCI / ACPI: Identify untrusted PCI devices
Now that the infrastructure to handle erratum 1165522 is in place,
let's make it a selectable option and add the required documentation.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Document the compatible strings for emtrion emCON-MX6 SoM's.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Removed the compatible string "snps,dw-pcie", it is for the reference
platform driver for PCI RC IP Protoyping Kits based on the ARC SDP,
so it is not suitable for all platform with designware PCIe controller,
and platform vendors have themselves' drivers.
The compatible string "snsp,dw-pcie" was added by mistake and it's not
matched that time, but it is matched because PCIe drivers has been
collected recently.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PCIe compatible string for LS1043A was lost, so add it.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwNpb0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGwGwH/00UHnXfxww3ixxz
zwTVDzptA6SPm6s84yJOWatM5fXhPiAltZaHSYF9lzRzNU71NCq7Frhq3fQUIXKM
OxqDn9nfSTWcjWTk2q5n2keyRV/KIn67YX7UgqFc1bO/mqtVjEgNWaMyblhI+e9E
giu1ZXayHr43jK1cDOmGExZubXUq7Vsc9TOlrd+d2SwIqeEP7TCMrPhnHDwCNvX2
UU5dtANpVzGtHaBcr37wJj+L8kODCc0f+PQ3g2ar5jTHst5SLlHp2u0AMRnUmgdi
VkGx+mu/uk8mtwUqMIMqhplklVoqK6LTeLqsY5Xt32SKruw9UqyJGdphLjW2QP/g
MkmA1lI=
=7kaD
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc6' into for-4.21/block
Pull in v4.20-rc6 to resolve the conflict in NVMe, but also to get the
two corruption fixes. We're going to be overhauling the direct dispatch
path, and we need to do that on top of the changes we made for that
in mainline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
have existed for a while, and half are for new regressions added in
the 4.20 merge window.
1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.
2) Revert bogus emac driver change, from Benjamin Herrenschmidt.
3) Handle BPF exported data structure with pointers when building
32-bit userland, from Daniel Borkmann.
4) Memory leak fix in act_police, from Davide Caratti.
5) Check RX checksum offload in RX descriptors properly in aquantia
driver, from Dmitry Bogdanov.
6) SKB unlink fix in various spots, from Edward Cree.
7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
Eric Dumazet.
8) Fix FID leak in mlxsw driver, from Ido Schimmel.
9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.
10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
limits otherwise namespace exit can hang. From Jiri Wiesner.
11) Address block parsing length fixes in x25 from Martin Schiller.
12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.
13) For tun interfaces, only iface delete works with rtnl ops, enforce
this by disallowing add. From Nicolas Dichtel.
14) Use after free in liquidio, from Pan Bian.
15) Fix SKB use after passing to netif_receive_skb(), from Prashant
Bhole.
16) Static key accounting and other fixes in XPS from Sabrina Dubroca.
17) Partially initialized flow key passed to ip6_route_output(), from
Shmulik Ladkani.
18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
Falcon.
19) Several small TCP fixes (off-by-one on window probe abort, NULL
deref in tail loss probe, SNMP mis-estimations) from Yuchung
Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
net/sched: cls_flower: Reject duplicated rules also under skip_sw
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
bnxt_en: Keep track of reserved IRQs.
bnxt_en: Fix CNP CoS queue regression.
net/mlx4_core: Correctly set PFC param if global pause is turned off.
Revert "net/ibm/emac: wrong bit is used for STA control"
neighbour: Avoid writing before skb->head in neigh_hh_output()
ipv6: Check available headroom in ip6_xmit() even without options
tcp: lack of available data can also cause TSO defer
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
mlxsw: spectrum_router: Relax GRE decap matching check
mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
mlxsw: spectrum_nve: Remove easily triggerable warnings
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
sctp: frag_point sanity check
tcp: fix NULL ref in tail loss probe
tcp: Do not underestimate rwnd_limited
net: use skb_list_del_init() to remove from RX sublists
...
Use dyn_event framework for uprobe events. This shows
uprobe events on "dynamic_events" file.
User can also define new uprobe events via dynamic_events.
Link: http://lkml.kernel.org/r/154140858481.17322.9091293846515154065.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Use dyn_event framework for kprobe events. This shows
kprobe events on "tracing/dynamic_events" file.
User can also define new events via tracing/dynamic_events.
Link: http://lkml.kernel.org/r/154140855646.17322.6619219995865980392.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Introduce protected-clock DT binding to fix breakage on qcom sdm845-mtp
boards where the qspi clks introduced this merge window cause the
firmware on those boards to take down the system if we try to read
the clk registers
- Fix a couple off-by-one errors found by Dan Carpenter
- Handle failure in zynq fixed factor clk driver to avoid using
uninitialized data
-----BEGIN PGP SIGNATURE-----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=t1kp
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A few clk driver fixes this time:
- Introduce protected-clock DT binding to fix breakage on qcom
sdm845-mtp boards where the qspi clks introduced this merge window
cause the firmware on those boards to take down the system if we
try to read the clk registers
- Fix a couple off-by-one errors found by Dan Carpenter
- Handle failure in zynq fixed factor clk driver to avoid using
uninitialized data"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: zynqmp: Off by one in zynqmp_is_valid_clock()
clk: mmp: Off by one in mmp_clk_add()
clk: mvebu: Off by one bugs in cp110_of_clk_get()
arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
clk: qcom: Support 'protected-clocks' property
dt-bindings: clk: Introduce 'protected-clocks' property
clk: zynqmp: handle fixed factor param query error
The example should follow the practice or using a generic node name
instead of the precise programming model, as recommended by the DTSpec.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One of the goals of this series is to remove a separate reference to
the css of the bio. This can and should be accessed via bio_blkcg(). In
this patch, wbc_init_bio() now requires a bio to have a device
associated with it.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The existing garbage collection algorithm has a number of problems:
1. The gc algorithm will not evict PERMANENT entries as those entries
are managed by userspace, yet the existing algorithm walks the entire
hash table which means it always considers PERMANENT entries when
looking for entries to evict. In some use cases (e.g., EVPN) there
can be tens of thousands of PERMANENT entries leading to wasted
CPU cycles when gc kicks in. As an example, with 32k permanent
entries, neigh_alloc has been observed taking more than 4 msec per
invocation.
2. Currently, when the number of neighbor entries hits gc_thresh2 and
the last flush for the table was more than 5 seconds ago gc kicks in
walks the entire hash table evicting *all* entries not in PERMANENT
or REACHABLE state and not marked as externally learned. There is no
discriminator on when the neigh entry was created or if it just moved
from REACHABLE to another NUD_VALID state (e.g., NUD_STALE).
It is possible for entries to be created or for established neighbor
entries to be moved to STALE (e.g., an external node sends an ARP
request) right before the 5 second window lapses:
-----|---------x|----------|-----
t-5 t t+5
If that happens those entries are evicted during gc causing unnecessary
thrashing on neighbor entries and userspace caches trying to track them.
Further, this contradicts the description of gc_thresh2 which says
"Entries older than 5 seconds will be cleared".
One workaround is to make gc_thresh2 == gc_thresh3 but that negates the
whole point of having separate thresholds.
3. Clearing *all* neigh non-PERMANENT/REACHABLE/externally learned entries
when gc_thresh2 is exceeded is over kill and contributes to trashing
especially during startup.
This patch addresses these problems as follows:
1. Use of a separate list_head to track entries that can be garbage
collected along with a separate counter. PERMANENT entries are not
added to this list.
The gc_thresh parameters are only compared to the new counter, not the
total entries in the table. The forced_gc function is updated to only
walk this new gc_list looking for entries to evict.
2. Entries are added to the list head at the tail and removed from the
front.
3. Entries are only evicted if they were last updated more than 5 seconds
ago, adhering to the original intent of gc_thresh2.
4. Forced gc is stopped once the number of gc_entries drops below
gc_thresh2.
5. Since gc checks do not apply to PERMANENT entries, gc levels are skipped
when allocating a new neighbor for a PERMANENT entry. By extension this
means there are no explicit limits on the number of PERMANENT entries
that can be created, but this is no different than FIB entries or FDB
entries.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This event code represents scroll reports from high-resolution wheels and
is modelled after the approach Windows uses. The value 120 is one detent
(wheel click) of movement. Mice with higher-resolution scrolling can send
fractions of 120 which must be accumulated in userspace. Userspace can either
wait for a full 120 to accumulate or scroll by fractions of one logical scroll
movement as the events come in. 120 was picked as magic number because it has
a high number of integer fractions that can be used by high-resolution wheels.
For more information see
https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn613912(v=vs.85)
These new axes obsolete REL_WHEEL and REL_HWHEEL. The legacy axes are emulated
by the kernel but the most accurate (and most granular) data is available
through the new axes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Verified-by: Harry Cutts <hcutts@chromium.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
This introduces two new compatibles for the cedrus driver, for the
A64 and H5 platforms.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the R8A77980 SoC support to the R-Car VIN driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The venus and s5p-mfc drivers add the loop filter alpha/beta offset
controls V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA/BETA with a range of
-6 to +6, inclusive. This is exactly the range specified for the slice
header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2,
which store half the actual filter offsets FilterOffsetA/B.
Clarify that this control contains the halved offsets.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
From LPC18xx and LPC43xx User Manuals the GPIO controller consists of
the following weakly connected blocks:
* GPIO pin interrupt block at 0x40087000,
* GPIO GROUP0 interrupt block at 0x40088000,
* GPIO GROUP1 interrupt block at 0x40089000,
* GPIO port block at 0x400F4000.
While all 4 sub-controller blocks have their own I/O addresses, moreover
all 3 interrupt blocks are APB0 peripherals and high-speed GPIO block is
an AHB slave, according to the hardware manual interrupt controllers and
GPIO controller block are seen as a single device, all 4 sub-controllers
have the shared reset signal RGU #28 and the same shared clock to access
registers CLK_Mx_GPIO on CCU1.
The change adds descriptions of the currently missing interrupt controller
blocks found on GPIO controller, new added properties are 'reg-names',
'resets', 'interrupt-controller' and '#interrupt-cells', also the example
is updated to reflect the changes in device tree binding description.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The register range for the RTC extends beyond 0x54.
Use the size from the user manual's memory map instead.
Fixes: 9765d2d943 ("rtc: sun6i: Add sun6i RTC driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add device tree bindings associating Arm TrustZone CryptoCell 703 with the
ccree driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
UAPI Changes:
Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.
Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAlwI7wUACgkQ/lWMcqZw
E8O/3g/9GQvNpNthglt4kSXUn9bj2D/MzQsL4sEsKYcp9eM3XTMy6raybfBpMdtf
U9y7G9EwQ8F01wd1m3d3HfBkKoy0WDTIsAjh06QUuSyyEivuQEoSxCKiI7t+Tatc
gJaj2TKHF1RaDikcV+x2pqqv8ptH+IzF0A65v5SAn8U5PVYz17pD0jctYR8F434X
o1xkjL5KS+vmfzu2keUCrWWtfAsPoyqcbEu5A3W+hhpKyQmS/8kVwr5J5LylvWqa
xalXHRUgaUrOGOFuYrqWhIKjydqpr8QhIuJqacmHfmV/qvASUTeqTTnzartb+FuU
d5E4p3bFaAjbAOHUEdlaLRA4oUK8/VA+WWaGKhPGreUE3TWn/thJJElAqoJhkbql
bGelBBkNNzDbJhtwjR4hmFN7fQz0Y1LxuBXtjw7wfomJAd/xJ5fgxqT58OovZgZt
f+hxxBTsdov5MOZ3XsB457b2MNmM+4kHM7urP3Z7mluEJ0ojmiokYMGJx0RDtLzP
YoukpqEwCaMlS4rdvil1nUfYw61/PFRxoBwlmarV2A3m1DUDQ2YyUNHOgVLrlzXv
RGdiTBvuvUZm6aSuzCVUiiiuQ0zwaFfBKdwXEA016irb34rdOoZ2b6w70GWi7QEl
0tQy5ULBwuhy1Kk8QXsJxRZPnnHznGoREryNDDOC0RAr/WEhwGY=
=t02J
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-12-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Final changes to drm-misc-next for v4.21:
UAPI Changes:
Core Changes:
- Add dma_fence_get_stub to dma-buf, and use it in drm/syncobj.
- Add and use DRM_MODESET_LOCK_BEGIN/END helpers.
- Small fixes to drm_atomic_helper_resume(), drm_mode_setcrtc() and
drm_atomic_helper_commit_duplicated_state()
- Fix drm_atomic_state_helper.[c] extraction.
Driver Changes:
- Small fixes to tinydrm, vkms, meson, rcar-du, virtio, vkms,
v3d, and pl111.
- vc4: Allow scaling and YUV formats on cursor planes.
- v3d: Enable use of the Texture Formatting Unit, and fix
prime imports of buffers from other drivers.
- Add support for the AUO G101EVN010 panel.
- sun4i: Enable support for the H6 display engine.
Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: added drm/v3d: fix broken build to the merge commit]
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/321be9d3-ab75-5f92-8193-e5113662edef@linux.intel.com
Update the PSPI NPCM binding document of the spi aliases use
to define the spi ID number.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Bindings should use 'reset-gpios', not 'reset-gpio'. The driver needs to
switch to the gpiod consume API to handle this correctly.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation to convert board-level bindings to json-schema, move
various misc SoC bindings out to their own file.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings,
listing it as a supported board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings,
listing it as a supported system on module.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Some documents are refering to others without links. With this
patch I add those missing links.
This patch affects only documents under process/ and labels where
necessary.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The mm-api.rst covers variety of memory management APIs under "More Memory
Management Functions" section. The descriptions included there are in a
random order there are quite a few of them which makes the section too
long.
Regrouping the documentation by subject and splitting the long "More Memory
Management Functions" section into several smaller sections makes the
generated html more usable.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix an extra space that sneaked in with commit 09c205afd "(x86, boot:
Define the 2.12 bzImage boot protocol").
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
There are a number of cases where conversions to devm_* API have been
done but developers forgot that this conversion may imply that return
values need to be checked for failure of internal resource handling
like allocation. While this should be clear, it does seem to be a
relatively common issue with API conversions or maybe "managed" is
being misunderstood ? So add a note to make the scope of "managed" clear.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Experiments showed that on at least the H3/H5/A64 the RTC's internal
oscillator also feeds the CPUS mux in the PRCM.
Export this clock through the device tree, instead of having to use
a dummy fixed-clock device node, for the PRCM to consume. This will
properly describe the relationship between the clocks.
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The A31 does not have an external clock output directly from the RTC.
Instead, it has four muxable clock outputs: three (A, B, C) are
controlled from the CCU, and the last (D) is controlled from the PRCM.
Deprecate the usage of the external clock output for the A31 compatible.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
While doing Bluetooth enablement for various boards based on various
Allwinner SoCs, minor differences in the RTC modules were found. These
include a lack of an external clock output (A31), different internal
oscillator frequencies (H3/H5/A64/V3/V3s), different regulator voltage
settings (H5/H6), and the presence of miscellaneous registers unrelated
to the RTC (A64/R40/H5/H6). The datasheet also describes different number
of registers for non-volatile storage, though based on actual experiments
the actual number is the same across the board.
This patch adds a list of all pre-H6 variants, grouped by the internal
oscillator's clock rate, regulator settings, and the presence of the
external clock output. Combinations are introduced for the variants that
have miscellaneous registers.
The RTC block in the H6 also handles the 24 MHz DCXO. This will require
more device tree binding changes and will be done later.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The clock output section for this binding describes the two outputs in
the descriptions for both the #clock-cells and clock-output-names
properties.
Instead of overlapping information that is hard to read, rewrite the
clock outputs as a list of indices and descriptions. The properies
can reference this list instead. This will also make it easier to
add notes or conditions to the clocks, and also for adding new outputs.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- fix broken links and some
- fix some grammar errors
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This allows the document to be integrated with the main documentation
tree.
Changes include:
- rename from .md to .rst
- use `` for code, not single `
- use correct sub-section marking
- fix indented blocks, both code and non-code
- fix external-link markup
Signed-off-by: NeilBrown <neilb@suse.com>
[jc: changed the toctree organization a bit]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Extend index.rst index file at admin-guide root directory with
the reference to perf-security.rst file being introduced.
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
These days architectures are mostly out of the business of dealing with
struct scatterlist at all, unless they have architecture specific iommu
drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN
one only enabled for architectures with horrible legacy iommu drivers
like alpha and parisc, and conditionally for arm which wants to keep it
disable for legacy platforms.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
The efuse found in gx SoC requires a peripheral clock to properly operate.
We have been able to work without it until now because the clock was on by
default, and left on by the CCF. Soon, it will not be the case anymore, so
the device needs to claim the clock it needs
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These convenience wrappers match the other _irq and _bh wrappers we
already have. It turns out I'd already open-coded xa_cmpxchg_irq()
in the shmem code, so convert that.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
The Edison 2 Quad-Core was a Tablet device released in 2013 by MundoReader
using a rk3188 soc. Add a devicetree for it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The current kref and kobject documentation may be
insufficient to understand these common pitfalls regarding
object lifetime and object releasing.
Add a bit more documentation and improve the warnings
seen by the user, pointing to the right piece of documentation.
Also, it's important to understand that making fun of people
publicly is not at all helpful, doesn't provide any value,
and it's not a healthy way of encouraging developers to do better.
"Mocking mercilessly" will, if anything, make developers feel bad
and go away. This kind of behavior should not be encouraged or justified.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SoC has PMU support in its L3 cache controller (L3C) and in the
DDR4 Memory Controller (DMC).
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[will: minor spelling and format fixes, dropped events list]
Signed-off-by: Will Deacon <will.deacon@arm.com>
amdgpu and amdkfd:
- Freesync support
- ABM support in DC
- KFD support for vega12 and polaris12
- Add sdma paging queue support for vega
- Use ACPI to query backlight range on supported platforms
- Clean up doorbell handling
- KFD fix for pasid handling under non-HWS
- Misc cleanups and fixes
scheduler:
- Revert "fix timeout handling v2"
radeon:
- Fix possible overflow on 32 bit
ttm:
- Fix for LRU handling for ghost objects
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130192505.2946-1-alexander.deucher@amd.com
Add nvmem properties to calibrate FGU from eFuse controller.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The bq24196 is another variant of the bq24190 charger ic.
Its register set is identical to the bq24192 and it even reuses
the same part number (0x5).
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for the ti,bq24192 variant and a child node for the
usb-otg-vbus regulator.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Similar to gpio-reset allow to specify active and inactive delays
while keeping the 100ms defaults that were used previously all the time.
The dt-properties are named the same as in gpio-reset but get an "-ms"
suffix as properties should contain such a suffix specifying its unit.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Documentation/networking/ is full of cryptically named files with
driver documentation. This makes finding interesting information
at a glance really hard. Move all those files into a directory
called device_drivers (since not all drivers are for device) and
fix up references.
RFC v0.1 -> RFC v1:
- also add .txt suffix to the files which are missing it (Quentin)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Henrik Austad <henrik@austad.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge from Upstream after the latest media fixes branch, because we
need one patch that it is there.
* commit '0072a0c14d5b7cb72c611d396f143f5dcd73ebe2': (1108 commits)
ide: Change to use DEFINE_SHOW_ATTRIBUTE macro
ide: pmac: add of_node_put()
drivers/tty: add missing of_node_put()
drivers/sbus/char: add of_node_put()
sbus: char: add of_node_put()
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
...
Add a note mentioning that these two controls are not part of the
public API while they still stabilizing.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
changes related to axp813.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE72YNB0Y/i3JqeVQT2O7X88g7+poFAlwIEC4ACgkQ2O7X88g7
+pr0FQ//YwW7NxbxgNsYH2z7tLUct5LgElj3HGVFO++OJGe+cEh4jDdNUqfjGhyb
ww5NkRZuUBZSqKoGukAARAbTH/gYQloNQV2C6EEk/AULYPkIG84tBRtDv2INBHxM
InoHLEvNZ4n4lDzmNzwjaUxxfUoRwFj1Rz1+dAYzuoC6ImFYqzwEuggwI9cRLd6h
hCVIh7lasGLQ9aCX04agE53ki4t52PGn8klRNUhdRS5T944g/8a1pdMoHT7faCFA
hbIMrC9LdEgUCdOkWwYGa87wfz1+DNfwTY7DC+/2P3ItGh8cV/w1Hi3IK6XRPVDY
1Gp6RYNtmB+EX2j0lSOvf6uUFx/YKbDkyJZlZY75ZLK/hb8Rl+RDIX8WQKA1tdAY
ie/8+DOSdnT+pQH1xGg+615fTnGWAK0W0rUaZdAmCwlBEfusBt2mtjOhuRuGXpSS
hua3KIZqX7FIKtcnPZ6dZ6oYKABgcEkUjap74F2Vc0sUFsrHv5BTR1/tiwmrNvnA
mD05Y9ApcEAA9TK9SAUOHRkvfS7fogBXjZqtKWB0BLHDZZQKZtItvzjx6R1tQaQs
5Vl19AIdeIjcnHPUKj8B7KtZk5LbdlvEiarxMbEVrijjh49K6gPr1PrvGTD74zuN
yafd7sRA2d8T1fSBkeNUTaJcEjRX7Q4IBmacVnFks/teynz6jhg=
=FoKv
-----END PGP SIGNATURE-----
Merge tag 'psy-mfd-axp813-immutable-for-v4.21-signed' into psy-next
Immutable branch between mfd and power-supply for driver
changes related to axp813.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The AXP803/AXP813 AC power supply can limit input current and voltage.
Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This file is a recent addition to media docs, and it is now the
only one without any license.
While the best is to dual-license with GFDL and GPL, it is,
at least, compatible with GFDL, as this is a requirement to be
part of the media uAPI docs.
So, add such license to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All Documentation files outside the uAPI are all licensed with,
at least, GPL 2.0. So, mark them as such.
The ondes at media/uapi are at least GFDL 1.1+.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Along the time, several image files got replaced by me by
new ones with similar contents.
As those were not simple conversions, dual-license them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
All those files are under GFDL 1.1 or later, with no invariant sections.
Tag them as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This is not needed there. Also, the same UTF-8 encoding should
be used on all documents.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The GNU Free Documentation License allows for a work to specify
Invariant Sections that are not allowed to be modified. (Debian
considers that this makes such works non-free.)
The Linux Media Infrastructure userspace API documentation does not
specify any such sections, but it also doesn't say there are none (as
is recommended by the license text). Make it explicit that there are
none.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marcus Metzler <mocm@metzlerbros.de>
Signed-off-by: Michael Ira Krufky <mkrufky@gmail.com>
Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the pclk-sample property to the list of optional properties
for the mt9m111 camera sensor.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Replace the vague binding by a more verbose. Remove the remote property
from the example since the driver don't support such a property. Also
remove the bus-width property from the endpoint since the driver don't
take care of it.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This introduces a new compatible for the A64 SRAM C1 section, that is
compatible with the SRAM C1 section as found on the A10.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This introduces new bindings for the H5 SoC in the SRAM controller.
Because the SRAM layout is different from other SoCs, no backward
compatibility is assumed with any of them.
However, the C1 SRAM section alone looks similar to previous SoCs,
so it is compatible with the initial A10 binding.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Allwinner ARMv5 F1C100s has similar watchdog timer to sun6i A31.
Add definition for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The suniv ARMv5 F1C100s chip has similar sram controller to sun4i A10.
Add compatible string for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Recent systems with Thunderbolt ports may support IOMMU natively. In
practice this means that Thunderbolt connected devices are placed behind
an IOMMU during the whole time it is connected (including during boot)
making Thunderbolt security levels redundant. This is called Kernel DMA
protection [1] by Microsoft.
Some of these systems still have Thunderbolt security level set to
"user" in order to support OS downgrade (the older version of the OS
might not support IOMMU based DMA protection so connecting a device
still relies on user approval).
Export this information to userspace by introducing a new sysfs
attribute (iommu_dma_protection). Based on it userspace tools can make
more accurate decision whether or not authorize the connected device.
In addition update Thunderbolt documentation regarding IOMMU based DMA
protection.
[1] https://docs.microsoft.com/en-us/windows/security/information-protection/kernel-dma-protection-for-thunderbolt
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
FB_DAMAGE_CLIPS is an optional plane property to mark damaged regions
on the plane in framebuffer coordinates of the framebuffer attached to
the plane.
The layout of blob data is simply an array of "struct drm_mode_rect".
Unlike plane src coordinates, damage clips are not in 16.16 fixed point.
As plane src in framebuffer cannot be negative so are damage clips. In
damage clip, x1/y1 are inclusive and x2/y2 are exclusive.
This patch also exports the kernel internal drm_rect to userspace as
drm_mode_rect. This is because "struct drm_clip_rect" is not sufficient
to represent damage for current plane size.
Driver which are interested in enabling FB_DAMAGE_CLIPS property for a
plane should enable this property using drm_plane_enable_damage_clips.
v2:
- Input validation on damage clips against framebuffer size.
- Doc update, other minor changes.
Signed-off-by: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Add the clock input of the main clock controller
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the clock inputs of amlogic AO clock controller
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The GPCv2 on the Freescale i.MX8MQ SoC works in the same way as the
GPCv2 on the i.MX7, but only controls more power domains with a
different mapping.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move trivial RTCs to the rtc generic binding documentation as they all also
support at least 'start-year'.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull input updates from Dmitry Torokhov:
"Mostly new IDs for Elan/Synaptics touchpads, plus a few small fixups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: omap-keypad - fix keyboard debounce configuration
Input: xpad - quirk all PDP Xbox One gamepads
Input: synaptics - enable SMBus for HP 15-ay000
Input: synaptics - add PNP ID for ThinkPad P50 to SMBus
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
Input: elan_i2c - add support for ELAN0621 touchpad
Input: hyper-v - fix wakeup from suspend-to-idle
Input: atkbd - clean up indentation issue
Input: st1232 - convert to SPDX identifiers
Input: migor_ts - convert to SPDX identifiers
Input: dt-bindings - fix a typo in file input-reset.txt
Input: cros_ec_keyb - fix button/switch capability reports
Input: elan_i2c - add ELAN0620 to the ACPI table
Input: matrix_keypad - check for errors from of_get_named_gpio()
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlwEZdIeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAlQH/19oax2Za3IPqF4X
DM3lal5M6zlUVkoYstqzpbR3MqUwgEnMfvoeMDC6mI9N4/+r2LkV7cRR8HzqQCCS
jDfD69IzRGb52VSeJmbOrkxBWsR1Nn0t4Z3rEeLPxwaOoNpRc8H973MbAQ2FKMpY
S4Y3jIK1dNiRRxdh52NupVkQF+djAUwkBuVk/rrvRJmTDij4la03cuCDAO+Di9lt
GHlVvygKw2SJhDR+z3ArwZNmE0ceCcE6+W7zPHzj2KeWuKrZg22kfUD454f2YEIw
FG0hu9qecgtpYCkLSm2vr4jQzmpsDoyq3ZfwhjGrP4qtvPC3Db3vL3dbQnkzUcJu
JtwhVCE=
=O1q1
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rc5' into for-4.21/block
Pull in v4.20-rc5, solving a conflict we'll otherwise get in aio.c and
also getting the merge fix that went into mainline that users are
hitting testing for-4.21/block and/or for-next.
* tag 'v4.20-rc5': (664 commits)
Linux 4.20-rc5
PCI: Fix incorrect value returned from pcie_get_speed_cap()
MAINTAINERS: Update linux-mips mailing list address
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
...
Pull RCU changes from Paul E. McKenney:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions
to their vanilla RCU counterparts. This series is a step
towards complete removal of the RCU-bh and RCU-sched update-side
functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for
rcutorture testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein
for a bag-on-head-class bug.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Many drivers load the device's firmware image during the initialization
flow either from the flash or from the disk. Currently this option is not
controlled by the user and the driver decides from where to load the
firmware image.
'fw_load_policy' gives the ability to control this option which allows the
user to choose between different loading policies supported by the driver.
This parameter can be useful while testing and/or debugging the device. For
example, testing a firmware bug fix.
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix llcc license, includes, and error checks
* Remove use of memcpy in cmd-db and fix API breakage
* Add QCS404 compatible to SMD-RPM
* Minor fixes for QMI
* Add irq clear handling in QCOM Geni SE during init
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hySS
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.21
* Fix llcc license, includes, and error checks
* Remove use of memcpy in cmd-db and fix API breakage
* Add QCS404 compatible to SMD-RPM
* Minor fixes for QMI
* Add irq clear handling in QCOM Geni SE during init
* tag 'qcom-drivers-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
drm: msm: Check cmd_db_read_aux_data() for failure
soc: qcom: smd-rpm: Add QCS404 compatible
soc: qcom: llcc-slice: Remove duplicated include from llcc-slice.c
soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
soc: qcom: Drop help text for QCOM_QMI_HELPERS
soc: qcom: qmi_interface: Limit txn ids to U16_MAX
soc: qcom: llcc-slice: Add error checks for API functions
soc: qcom/llcc: add MODULE_LICENSE tag
soc: qcom: Add irq clear handling during SE init
Signed-off-by: Olof Johansson <olof@lixom.net>
Peter Hutterer