Commit Graph

1778 Commits

Author SHA1 Message Date
Linus Torvalds 670ffccb2f SCSI misc on 20171114
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
 megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
 updates.
 
 There's no major behaviour change or additions to the core in all of
 this, so the potential for regressions should be small (biggest
 potential being in the scsi error handler changes).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaCxtCAAoJEAVr7HOZEZN4d9EQAI+OHP6ss6zjKKC21c9jNPcH
 NhLrNv37gHg/LA2VXeUEL9RGUjCGLIUrI4HsrxzkFAMLKP4TkshMs8/2RvczY+Sa
 VpayPqVybEKLIS6ipQyM1SLIQff2nvtDVcN/T+8z1lkk45TrbA6ZGuwUwd2aJyEA
 2V2wtg51ObnL0Nr9QPPll0JrtL1AnCZyRlu9XrwTZuuSBZwk93opIuuvbZm/3dVg
 Ir4GSS4Y+PuHIfu4cxqdsPMdzRdY9I2me1YiE4jeFSn1/VTAjL4HBz7fO9eITT42
 VhXSpDz1XvFsa9dJ0ubkqoALpJzCfOcBw+EuGvSydLEvOBoEVwMccdfaD9lT1zc5
 L9e1Z5qqJoq7hTA6xTXCYfWG73I9HYvljtmc8yudKHhADOdnSTUXhaO6uBF0RNqD
 OxPSA1RZwRx3c6lDOcK6BTtvLAkTEuYKdrWSKJi0w+QXJAyQ6etqbmsKpmPdRim7
 Z4ZSpJFro2gyo9gcdJO0ykTG+z3U7Z/ay1sNgnuprsv+eU/QjUdlAPl18o79EkRf
 H54zZggZ4wC6q/cFVVt4Vx+V+oqIeu38s7NDXS9UltLoTZPm2EzDW6pXd/38Z4Tf
 a1oBAUET8kYLC90P8sVZxUIHZjITlpgDbyE2Lq00PMYXhk8S4IxF0aMN5RvVqzUv
 +7N2HrHkSSgG1nhw1t+E
 =3O85
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
  megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor
  updates.

  There's no major behaviour change or additions to the core in all of
  this, so the potential for regressions should be small (biggest
  potential being in the scsi error handler changes)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits)
  scsi: lpfc: Fix hard lock up NMI in els timeout handling.
  scsi: mpt3sas: remove a stray KERN_INFO
  scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event()
  scsi: aacraid: use timespec64 instead of timeval
  scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions
  scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
  scsi: mpt3sas: fix dma_addr_t casts
  scsi: be2iscsi: Use kasprintf
  scsi: storvsc: Avoid excessive host scan on controller change
  scsi: lpfc: fix kzalloc-simple.cocci warnings
  scsi: mpt3sas: Update mpt3sas driver version.
  scsi: mpt3sas: Fix sparse warnings
  scsi: mpt3sas: Fix nvme drives checking for tlr.
  scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info
  scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives.
  scsi: mpt3sas: scan and add nvme device after controller reset
  scsi: mpt3sas: Set NVMe device queue depth as 128
  scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.
  scsi: mpt3sas: API's to remove nvme drive from sml
  scsi: mpt3sas: API 's to support NVMe drive addition to SML
  ...
2017-11-14 16:23:44 -08:00
Linus Torvalds 2bcc673101 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...
2017-11-13 17:56:58 -08:00
Kees Cook 8e5f4ba0cd scsi: qla2xxx: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: qla2xxx-upstream@qlogic.com
Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Tested-by: Bart Van Assche <Bart.VanAssche@wdc.com>
2017-11-08 15:51:35 -08:00
Ingo Molnar 8c5db92a70 Merge branch 'linus' into locking/core, to resolve conflicts
Conflicts:
	include/linux/compiler-clang.h
	include/linux/compiler-gcc.h
	include/linux/compiler-intel.h
	include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-07 10:32:44 +01:00
Bart Van Assche 8653188763 scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair()
Avoid that the following is reported while loading the qla2xxx
kernel module:

BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/783
caller is debug_smp_processor_id+0x17/0x20
CPU: 7 PID: 783 Comm: modprobe Not tainted 4.14.0-rc8-dbg+ #2
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0x8e/0xce
 check_preemption_disabled+0xe3/0xf0
 debug_smp_processor_id+0x17/0x20
 qla2x00_probe_one+0xf43/0x26c0 [qla2xxx]
 pci_device_probe+0xca/0x140
 driver_probe_device+0x2e2/0x440
 __driver_attach+0xa3/0xe0
 bus_for_each_dev+0x5f/0x90
 driver_attach+0x19/0x20
 bus_add_driver+0x1c0/0x260
 driver_register+0x5b/0xd0
 __pci_register_driver+0x63/0x70
 qla2x00_module_init+0x1d6/0x222 [qla2xxx]
 do_one_initcall+0x3c/0x163
 do_init_module+0x55/0x1eb
 load_module+0x20a2/0x2890
 SYSC_finit_module+0xd7/0xf0
 SyS_finit_module+0x9/0x10
 entry_SYSCALL_64_fastpath+0x23/0xc2

Fixes: commit 8abfa9e226 ("scsi: qla2xxx: Add function call to qpair for door bell")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Quinn Tran <quinn.tran@cavium.com>
Cc: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: <stable@vger.kernel.org>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-06 23:07:26 -05:00
Linus Torvalds 01073ac1b1 SCSI fixes on 20171103
One minor fix in the error leg of the qla2xxx driver (it oopses the
 system if we get an error trying to start the internal kernel thread).
 The fix is minor because the problem isn't often encountered in the
 field (although it can be induced by inserting the module in a low
 memory environment).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZ/JwgAAoJEAVr7HOZEZN4TMcP/2uZBP/xDzHdcX0P7310MAwj
 GxpWjCwf5IuHk5Tu0ASmMF/xThqPfyzX1OTpRkfeRNPKB7FT4OXT80Ru6A6QmINF
 b6ofKQP7Id6Vc6E6cHOkRukCXiU7AywgwtvGHOa62UkAs7TxRiuBTacYiSeHDfqa
 i1shGkJB4d5RxujXrnUAzsl2Kqcko0AcWTuckM7R8o1fACfh1JiHGTeOkhbayDqd
 6Q0+Hv4uZFgVXtG+NFwWlTeCEqgEKZ0A5r8mBuGnpvmZ/EQkUyiWgxkYfCpEEEpV
 RIEq1Jz3oVVjbBiFeGKUeaU1/YtwGkhdLkxOJA2a1tWcCgRfb2YQnENqtOzvx5Xh
 iqXgK+7CsaM6oDl6Gs3PoJiO1bEJ2wFHu5tZFxz/gHYYKmk4u0SD/IsWtkrDnXTE
 4A3P783lsSF+jGT4cHazN+/HldT3diQ+Iov2l3dlnR8xzEzSLATsOkyNVgMGJLLW
 dsOcpD9qZc6GpL6tDtDcxvyJgBtYeBGfibcw/zg8C0Ur2G6QeBYrKCMD3RKUcOIO
 b5GVmdq1ALEaMJ6VludFwSqdA8tZtG+otK/RVAvNPnsC+rgocL67ccUVLsZGT/wd
 EPSxa7tAHnVgnR7byp2lJqAbuU0iLXDtSrVHMam8M5DqsvPx+B6uz4ZIUdw0Enxs
 FzFzTEExS5LHMn2w+5rk
 =FkHm
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
 "One minor fix in the error leg of the qla2xxx driver (it oopses the
  system if we get an error trying to start the internal kernel thread).

  The fix is minor because the problem isn't often encountered in the
  field (although it can be induced by inserting the module in a low
  memory environment)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix oops in qla2x00_probe_one error path
2017-11-03 10:26:40 -07:00
Linus Torvalds ead751507d License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
 makes it harder for compliance tools to determine the correct license.
 
 By default all files without license information are under the default
 license of the kernel, which is GPL version 2.
 
 Update the files which contain no license information with the 'GPL-2.0'
 SPDX license identifier.  The SPDX identifier is a legally binding
 shorthand, which can be used instead of the full boiler plate text.
 
 This patch is based on work done by Thomas Gleixner and Kate Stewart and
 Philippe Ombredanne.
 
 How this work was done:
 
 Patches were generated and checked against linux-4.14-rc6 for a subset of
 the use cases:
  - file had no licensing information it it.
  - file was a */uapi/* one with no licensing information in it,
  - file was a */uapi/* one with existing licensing information,
 
 Further patches will be generated in subsequent months to fix up cases
 where non-standard license headers were used, and references to license
 had to be inferred by heuristics based on keywords.
 
 The analysis to determine which SPDX License Identifier to be applied to
 a file was done in a spreadsheet of side by side results from of the
 output of two independent scanners (ScanCode & Windriver) producing SPDX
 tag:value files created by Philippe Ombredanne.  Philippe prepared the
 base worksheet, and did an initial spot review of a few 1000 files.
 
 The 4.13 kernel was the starting point of the analysis with 60,537 files
 assessed.  Kate Stewart did a file by file comparison of the scanner
 results in the spreadsheet to determine which SPDX license identifier(s)
 to be applied to the file. She confirmed any determination that was not
 immediately clear with lawyers working with the Linux Foundation.
 
 Criteria used to select files for SPDX license identifier tagging was:
  - Files considered eligible had to be source code files.
  - Make and config files were included as candidates if they contained >5
    lines of source
  - File already had some variant of a license header in it (even if <5
    lines).
 
 All documentation files were explicitly excluded.
 
 The following heuristics were used to determine which SPDX license
 identifiers to apply.
 
  - when both scanners couldn't find any license traces, file was
    considered to have no license information in it, and the top level
    COPYING file license applied.
 
    For non */uapi/* files that summary was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0                                              11139
 
    and resulted in the first patch in this series.
 
    If that file was a */uapi/* path one, it was "GPL-2.0 WITH
    Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|-------
    GPL-2.0 WITH Linux-syscall-note                        930
 
    and resulted in the second patch in this series.
 
  - if a file had some form of licensing information in it, and was one
    of the */uapi/* ones, it was denoted with the Linux-syscall-note if
    any GPL family license was found in the file or had no licensing in
    it (per prior point).  Results summary:
 
    SPDX license identifier                            # files
    ---------------------------------------------------|------
    GPL-2.0 WITH Linux-syscall-note                       270
    GPL-2.0+ WITH Linux-syscall-note                      169
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
    ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
    LGPL-2.1+ WITH Linux-syscall-note                      15
    GPL-1.0+ WITH Linux-syscall-note                       14
    ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
    LGPL-2.0+ WITH Linux-syscall-note                       4
    LGPL-2.1 WITH Linux-syscall-note                        3
    ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
    ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1
 
    and that resulted in the third patch in this series.
 
  - when the two scanners agreed on the detected license(s), that became
    the concluded license(s).
 
  - when there was disagreement between the two scanners (one detected a
    license but the other didn't, or they both detected different
    licenses) a manual inspection of the file occurred.
 
  - In most cases a manual inspection of the information in the file
    resulted in a clear resolution of the license that should apply (and
    which scanner probably needed to revisit its heuristics).
 
  - When it was not immediately clear, the license identifier was
    confirmed with lawyers working with the Linux Foundation.
 
  - If there was any question as to the appropriate license identifier,
    the file was flagged for further research and to be revisited later
    in time.
 
 In total, over 70 hours of logged manual review was done on the
 spreadsheet to determine the SPDX license identifiers to apply to the
 source files by Kate, Philippe, Thomas and, in some cases, confirmation
 by lawyers working with the Linux Foundation.
 
 Kate also obtained a third independent scan of the 4.13 code base from
 FOSSology, and compared selected files where the other two scanners
 disagreed against that SPDX file, to see if there was new insights.  The
 Windriver scanner is based on an older version of FOSSology in part, so
 they are related.
 
 Thomas did random spot checks in about 500 files from the spreadsheets
 for the uapi headers and agreed with SPDX license identifier in the
 files he inspected. For the non-uapi files Thomas did random spot checks
 in about 15000 files.
 
 In initial set of patches against 4.14-rc6, 3 files were found to have
 copy/paste license identifier errors, and have been fixed to reflect the
 correct identifier.
 
 Additionally Philippe spent 10 hours this week doing a detailed manual
 inspection and review of the 12,461 patched files from the initial patch
 version early this week with:
  - a full scancode scan run, collecting the matched texts, detected
    license ids and scores
  - reviewing anything where there was a license detected (about 500+
    files) to ensure that the applied SPDX license was correct
  - reviewing anything where there was no detection but the patch license
    was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
    SPDX license was correct
 
 This produced a worksheet with 20 files needing minor correction.  This
 worksheet was then exported into 3 different .csv files for the
 different types of files to be modified.
 
 These .csv files were then reviewed by Greg.  Thomas wrote a script to
 parse the csv files and add the proper SPDX tag to the file, in the
 format that the file expected.  This script was further refined by Greg
 based on the output to detect more types of files automatically and to
 distinguish between header and source .c files (which need different
 comment types.)  Finally Greg ran the script using the .csv files to
 generate the patches.
 
 Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
 Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
 Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
 6dVh26uchcEQLN/XqUDt
 =x306
 -----END PGP SIGNATURE-----

Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull initial SPDX identifiers from Greg KH:
 "License cleanup: add SPDX license identifiers to some files

  Many source files in the tree are missing licensing information, which
  makes it harder for compliance tools to determine the correct license.

  By default all files without license information are under the default
  license of the kernel, which is GPL version 2.

  Update the files which contain no license information with the
  'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
  binding shorthand, which can be used instead of the full boiler plate
  text.

  This patch is based on work done by Thomas Gleixner and Kate Stewart
  and Philippe Ombredanne.

  How this work was done:

  Patches were generated and checked against linux-4.14-rc6 for a subset
  of the use cases:

   - file had no licensing information it it.

   - file was a */uapi/* one with no licensing information in it,

   - file was a */uapi/* one with existing licensing information,

  Further patches will be generated in subsequent months to fix up cases
  where non-standard license headers were used, and references to
  license had to be inferred by heuristics based on keywords.

  The analysis to determine which SPDX License Identifier to be applied
  to a file was done in a spreadsheet of side by side results from of
  the output of two independent scanners (ScanCode & Windriver)
  producing SPDX tag:value files created by Philippe Ombredanne.
  Philippe prepared the base worksheet, and did an initial spot review
  of a few 1000 files.

  The 4.13 kernel was the starting point of the analysis with 60,537
  files assessed. Kate Stewart did a file by file comparison of the
  scanner results in the spreadsheet to determine which SPDX license
  identifier(s) to be applied to the file. She confirmed any
  determination that was not immediately clear with lawyers working with
  the Linux Foundation.

  Criteria used to select files for SPDX license identifier tagging was:

   - Files considered eligible had to be source code files.

   - Make and config files were included as candidates if they contained
     >5 lines of source

   - File already had some variant of a license header in it (even if <5
     lines).

  All documentation files were explicitly excluded.

  The following heuristics were used to determine which SPDX license
  identifiers to apply.

   - when both scanners couldn't find any license traces, file was
     considered to have no license information in it, and the top level
     COPYING file license applied.

     For non */uapi/* files that summary was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0                                              11139

     and resulted in the first patch in this series.

     If that file was a */uapi/* path one, it was "GPL-2.0 WITH
     Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
     was:

       SPDX license identifier                            # files
       ---------------------------------------------------|-------
       GPL-2.0 WITH Linux-syscall-note                        930

     and resulted in the second patch in this series.

   - if a file had some form of licensing information in it, and was one
     of the */uapi/* ones, it was denoted with the Linux-syscall-note if
     any GPL family license was found in the file or had no licensing in
     it (per prior point). Results summary:

       SPDX license identifier                            # files
       ---------------------------------------------------|------
       GPL-2.0 WITH Linux-syscall-note                       270
       GPL-2.0+ WITH Linux-syscall-note                      169
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
       ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
       LGPL-2.1+ WITH Linux-syscall-note                      15
       GPL-1.0+ WITH Linux-syscall-note                       14
       ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
       LGPL-2.0+ WITH Linux-syscall-note                       4
       LGPL-2.1 WITH Linux-syscall-note                        3
       ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
       ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

     and that resulted in the third patch in this series.

   - when the two scanners agreed on the detected license(s), that
     became the concluded license(s).

   - when there was disagreement between the two scanners (one detected
     a license but the other didn't, or they both detected different
     licenses) a manual inspection of the file occurred.

   - In most cases a manual inspection of the information in the file
     resulted in a clear resolution of the license that should apply
     (and which scanner probably needed to revisit its heuristics).

   - When it was not immediately clear, the license identifier was
     confirmed with lawyers working with the Linux Foundation.

   - If there was any question as to the appropriate license identifier,
     the file was flagged for further research and to be revisited later
     in time.

  In total, over 70 hours of logged manual review was done on the
  spreadsheet to determine the SPDX license identifiers to apply to the
  source files by Kate, Philippe, Thomas and, in some cases,
  confirmation by lawyers working with the Linux Foundation.

  Kate also obtained a third independent scan of the 4.13 code base from
  FOSSology, and compared selected files where the other two scanners
  disagreed against that SPDX file, to see if there was new insights.
  The Windriver scanner is based on an older version of FOSSology in
  part, so they are related.

  Thomas did random spot checks in about 500 files from the spreadsheets
  for the uapi headers and agreed with SPDX license identifier in the
  files he inspected. For the non-uapi files Thomas did random spot
  checks in about 15000 files.

  In initial set of patches against 4.14-rc6, 3 files were found to have
  copy/paste license identifier errors, and have been fixed to reflect
  the correct identifier.

  Additionally Philippe spent 10 hours this week doing a detailed manual
  inspection and review of the 12,461 patched files from the initial
  patch version early this week with:

   - a full scancode scan run, collecting the matched texts, detected
     license ids and scores

   - reviewing anything where there was a license detected (about 500+
     files) to ensure that the applied SPDX license was correct

   - reviewing anything where there was no detection but the patch
     license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
     applied SPDX license was correct

  This produced a worksheet with 20 files needing minor correction. This
  worksheet was then exported into 3 different .csv files for the
  different types of files to be modified.

  These .csv files were then reviewed by Greg. Thomas wrote a script to
  parse the csv files and add the proper SPDX tag to the file, in the
  format that the file expected. This script was further refined by Greg
  based on the output to detect more types of files automatically and to
  distinguish between header and source .c files (which need different
  comment types.) Finally Greg ran the script using the .csv files to
  generate the patches.

  Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
  Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
  Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  License cleanup: add SPDX license identifier to uapi header files with a license
  License cleanup: add SPDX license identifier to uapi header files with no license
  License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02 10:04:46 -07:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Douglas Miller e2532b4af6 scsi: qla2xxx: Fix oops in qla2x00_probe_one error path
On error, kthread_create() returns an errno-encoded pointer, not NULL.
The routine qla2x00_probe_one() detects the error case and jumps to
probe_failed, but has already assigned the return value from
kthread_create() to ha->dpc_thread.  Then probe_failed checks to see if
ha->dpc_thread is not NULL before doing cleanup on it. Since in the
error case this is also not NULL, it ends up trying to access an invalid
task pointer.

Solution is to assign NULL to ha->dpc_thread in the error path to avoid
kthread cleanup in that case.

Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-31 08:06:07 -04:00
Linus Torvalds 5345da892c SCSI fixes on 20171027
Six fixes for mostly minor issues, most of which have small race
 windows for occurring.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZ8zx3AAoJEAVr7HOZEZN4K9AP/2uTLQrPfn3GElSZEXcFsQDK
 zhvaLkoDXARlWb8wevw5od0VpcLvNPQKZxsPpQ2afIpt2PQNPNykbFsbxnvVV0rE
 SxUaHJg+hg2CmtKGmj30WN/9SKNp1vEuBbPKZFCvXhshc54m8VOKUhgaLpIj9NkC
 oiIqFl005obvEq6otGDUYpttZRScIpMkMML89hr9UMcfWqS9fYvTpu+xr8RDP77S
 lld8dKbWCk5Zk3w6Ag7s2gjjR01FnpV5cWEPOEwuVrjEE1hgmTv5oHPpJPc+mx+4
 q2kuvNmLsEuwlybqLTc4BBKwKtP4G6mZ5pq/um6DrTMjzLwkRGXSXejgl5mf5pPu
 1FxkHv2SUWjGCDdpGy5ozNCWuCjX/la+tc9LM56/Nuann3XisD5yYoWzAltspFPp
 84OmUilknJsdUBBzO3FaXHcEc+084wi5ntMf+FpCFc7gfMVZU0IaOC8/cgFsmQaa
 Ll07BWCxo0/JTqHqUZdAdS953zLw7izYk4GqHd7roUGYWDjWge01+VzKCJKW1SOF
 mY+jmPB5rnbTw5d/xE0aSPjfpkXLZqc2jGHNj4N8C27JG0grB2SXVNyDrcCm48b/
 6HQNKNjOxr0309mtwRDw9S9CoATRiOUHvHwYJQBhB2iMrkzu15CrbD0i5sAC+T4j
 iRnjW/tbyRjZCLGK69oS
 =6jlR
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Six fixes for mostly minor issues, most of which have small race
  windows for occurring"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Suppress a kernel warning in case the prep function returns BLKPREP_DEFER
  scsi: sg: Re-fix off by one in sg_fill_request_table()
  scsi: aacraid: Fix controller initialization failure
  scsi: hpsa: Fix configured_logical_drive_count·check
  scsi: qla2xxx: Initialize Work element before requesting IRQs
  scsi: zfcp: fix erp_action use-before-initialize in REC action trace
2017-10-28 10:46:20 -07:00
Mark Rutland 6aa7de0591 locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-25 11:01:08 +02:00
Linus Torvalds ebe6e90ccc SCSI fixes on 20171017
Four mostly error leg fixes and one more important regression in a
 prior commit (the qla2xxx one).
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZ5h/9AAoJEAVr7HOZEZN4moMQAKnW6fLBZ8gb5BiZa5+zFFwf
 OEYP70It4EW1+tINcL1mTYzXTP03sS08iKdDg8MsRSltShwpc7Hxch731wV1wIod
 VPvRt/0RIODaMPBEHBlYTBZUsXOZ494sVCzhH8oE5uB3yEZEBctd2klIMgBXFvIH
 GxQR9PMbY4cm9Ve9jsLsNLP/EFRNMrXOUG5Z9bCU+bOhiR67ic3lLfONqPZZKWHo
 WuZSdOW3wHozVTa4VNFTvHRE3xYXwG7QnTP5rbmFtV7Q026lwz5R2TLsuxbEhZZk
 jbxVpA/Hqu0apsaUFzxu4FS6E4jkUpRdv0wweotW5OQMxZaARLr8C9xvYim+mSAU
 JkA+ce+1GiUUFz7E+Empqzi2R8GjBu1y/OBbD5R5QKPR/2caRSUbMqmnppAgweXK
 nQlxtrbOvdgSeEHffB08VeQhKod9xEc/eE++yGTg2N+JhSratKs3Rx8VVj9dOMgP
 S4UmWTr/Vy5NJCLrkQ2GWM6fiXFjQnpymzzzGZKvRXSWqVuJHEG8PY4Bbj2Q2UfD
 9xwIUAFu/uAQZ0Thy6KrMGs266V66P7fpKL40P2FCQtrAFQcqd1D50Ubv4qs3uyw
 jc0/mW4VIgggu78SR20XJp/MCiStzEYko8NhXZ6FadOzz3nprSrUtwx2fEqrDmFF
 0iK0LBUJl4NjhVUPv2gn
 =3PVx
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Four mostly error leg fixes and one more important regression in a
  prior commit (the qla2xxx one)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fc: check for rport presence in fc_block_scsi_eh
  scsi: qla2xxx: Fix uninitialized work element
  scsi: libiscsi: fix shifting of DID_REQUEUE host byte
  scsi: libfc: fix a deadlock in fc_rport_work
  scsi: fixup kernel warning during rmmod()
2017-10-17 15:54:41 -04:00
Christoph Hellwig 05231a3bb7 scsi: qla2xxx: don't break the bsg-lib abstractions
Always use bsg_job->reply instead of scsi_req(bsg_job->req)->sense), as
they always point to the same memory.

Never set scsi_req(bsg_job->req)->result and we'll set that value
through bsg_job_done.

[mkp: applied by hand, fixed whitespace]

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Tested-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:46:21 -04:00
Himanshu Madhani 1010f21ecf scsi: qla2xxx: Initialize Work element before requesting IRQs
commit a9e170e286 ("scsi: qla2xxx: Fix uninitialized work element")
moved initializiation of work element earlier in the probe to fix call
stack. However, it still leaves a window where interrupt can be
generated before work element is initialized. Fix that window by
initializing work element before we are requesting IRQs.

[mkp: fixed typos]

Fixes: a9e170e286 ("scsi: qla2xxx: Fix uninitialized work element")
Cc: <stable@vger.kernel.org> # 4.13
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:12:36 -04:00
Giridhar Malavali 2d57b5efda scsi: qla2xxx: Query FC4 type during RSCN processing
Based on the FC4 type, login will proceed to either FCP or FC-NVMe
remote ports.

Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:06:03 -04:00
Himanshu Madhani c38d1baff8 scsi: qla2xxx: Use ql2xnvmeenable to enable Q-Pair for FC-NVMe
In some environments, user can choose to not enable SCSI-MQ but wants to
use FC-NVMe feature of the driver. Since driver relies on Q-Pairs to
allocate FC-NVMe resources, use existing module parameter to create
Q-Pairs when FC-NVMe is enabled.

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:05:14 -04:00
Himanshu Madhani 4ca8204781 scsi: qla2xxx: Update driver version to 10.00.00.02-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:02:52 -04:00
Duane Grigsby edd05de197 scsi: qla2xxx: Changes to support N2N logins
If we discovered a topology that is N2N then we will issue a login to
the target. If our WWPN is bigger than the target's WWPN then we will
initiate login, otherwise we will just wait for the target to initiate
login.

[mkp: many whitespace errors]

Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 23:02:20 -04:00
Duane Grigsby c0c462c8a0 scsi: qla2xxx: Allow MBC_GET_PORT_DATABASE to query and save the port states
The MBC_GET_PORT_DATABASE command normally checks the port state
information. This patch allows it to save that info in the fcport
structure and ignore the check if the query flag is set.

[mkp: typo]

Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 22:56:21 -04:00
Himanshu Madhani c955886962 scsi: qla2xxx: Add ATIO-Q processing for INTx mode
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 22:55:30 -04:00
Himanshu Madhani e7240af510 scsi: qla2xxx: Reinstate module parameter ql2xenablemsix
[mkp: fixed whitespace]

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-16 22:54:29 -04:00
Quinn Tran a9e170e286 scsi: qla2xxx: Fix uninitialized work element
Fixes following stack trace

kernel: Call Trace:
kernel: dump_stack+0x63/0x84
kernel: __warn+0xd1/0xf0
kernel: warn_slowpath_null+0x1d/0x20
kernel: __queue_work+0x37a/0x420
kernel: queue_work_on+0x27/0x40
kernel: queue_work+0x14/0x20 [qla2xxx]
kernel: schedule_work+0x13/0x20 [qla2xxx]
kernel: qla2x00_post_work+0xab/0xb0 [qla2xxx]
kernel: qla2x00_post_aen_work+0x3b/0x50 [qla2xxx]
kernel: qla2x00_async_event+0x20d/0x15d0 [qla2xxx]
kernel: ? lock_timer_base+0x7d/0xa0
kernel: qla24xx_intr_handler+0x1da/0x310 [qla2xxx]
kernel: qla2x00_poll+0x36/0x60 [qla2xxx]
kernel: qla2x00_mailbox_command+0x659/0xec0 [qla2xxx]
kernel: ? proc_create_data+0x7a/0xd0
kernel: qla25xx_init_rsp_que+0x15b/0x240 [qla2xxx]
kernel: ? request_irq+0x14/0x20 [qla2xxx]
kernel: qla25xx_create_rsp_que+0x256/0x3c0 [qla2xxx]
kernel: qla2xxx_create_qpair+0x2af/0x5b0 [qla2xxx]
kernel: qla2x00_probe_one+0x1107/0x1c30 [qla2xxx]

Fixes: ec7193e260 ("qla2xxx: Fix delayed response to command for loop mode/direct connect.")
Cc: <stable@vger.kernel.org> # 4.13
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-11 14:30:07 -04:00
Thomas Meyer 08eb7f45de scsi: qla2xxx: Cocci spatch "pool_zalloc-simple"
Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-09-25 19:07:18 -04:00
James Smart 39a550d2d9 qla2xxx: remove use of FC-specific error codes
The qla2xxx driver uses the FC-specific error when it needed to return an
error to the FC-NVME transport.  Convert to use a generic value instead.

Signed-off-by: James Smart <james.smart@broadcom.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-09-25 08:56:05 -06:00
Linus Torvalds 572c01ba19 SCSI misc on 20170907
This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, zfcp and a host of minor updates.
 
 The major driver change here is the elimination of the block based
 cciss driver in favour of the SCSI based hpsa driver (which now drives
 all the legacy cases cciss used to be required for).  Plus a reset
 handler clean up and the redo of the SAS SMP handler to use bsg lib.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJZscDNAAoJEAVr7HOZEZN4DWIQAK/UkkrvKpV/jLATM/yi7CoL
 QidY86Hmwwl7A9HQ+2fjLfAsye0xcCzRwkucKK90IP5b4pefHhiJJfiMKAAe3TUW
 xstnY5z5jaOhDG4nyJFoSm5fH5qXkMnJ8NZRK8f6Qg5yBN5dStEKqoBboNsz4KBI
 md7idw0mbp5i2GXlJwSpc5eDS97GiPL6WkwgGaGKfXF1NDau0GbEdjijfz55haCD
 pMhY7WJh/71RfOq/1ThXT1Z3khOlVcKXrkdO+602n7zh/klRBRtBC8m2a6xCfZPj
 n7Pb/s0jhCQPd+e/Xtv7WEbY8uNOCrGoVgZ6U5EGrT5IeTfep24ackYqerjMhE63
 esi4BJY8lUP9SGleLMgjYWyCHdmxBJRa7UI614DWN/H0QoGP6j/2EzGoi5Fw04vC
 H8/+aqPPWZc9KUBioRYo8xWO8YgMqL2eyXY+Tc9cwxqAe2T6k/NC1zJVgDFKXfzb
 QoWW4v9NNmYwf5vL/7tNgkeTMFQV66yUR7dR3SGTSk8UIrJ40ok0JyUAsDg86ZAH
 BfMkWwhWQ6Byoel0Y7Ti88T49Cox/64r/I0ux06Qgg99+KpRLT7z20+GLIEHgXxg
 116C39rgvYKqzc7W8RCyj8qSROuMVzg6QFbB6n+1PEsYIX2O8A2Re3jdS34q2LbX
 aBDm/Lfdl4kkJrV9xY6P
 =nQUG
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas,
  megaraid_sas, zfcp and a host of minor updates.

  The major driver change here is the elimination of the block based
  cciss driver in favour of the SCSI based hpsa driver (which now drives
  all the legacy cases cciss used to be required for). Plus a reset
  handler clean up and the redo of the SAS SMP handler to use bsg lib"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: scsi-mq: Always unprepare before requeuing a request
  scsi: Show .retries and .jiffies_at_alloc in debugfs
  scsi: Improve requeuing behavior
  scsi: Call scsi_initialize_rq() for filesystem requests
  scsi: qla2xxx: Reset the logo flag, after target re-login.
  scsi: qla2xxx: Fix slow mem alloc behind lock
  scsi: qla2xxx: Clear fc4f_nvme flag
  scsi: qla2xxx: add missing includes for qla_isr
  scsi: qla2xxx: Fix an integer overflow in sysfs code
  scsi: aacraid: report -ENOMEM to upper layer from aac_convert_sgraw2()
  scsi: aacraid: get rid of one level of indentation
  scsi: aacraid: fix indentation errors
  scsi: storvsc: fix memory leak on ring buffer busy
  scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough
  scsi: smartpqi: remove the smp_handler stub
  scsi: hpsa: remove the smp_handler stub
  scsi: bsg-lib: pass the release callback through bsg_setup_queue
  scsi: Rework handling of scsi_device.vpd_pg8[03]
  scsi: Rework the code for caching Vital Product Data (VPD)
  scsi: rcu: Introduce rcu_swap_protected()
  ...
2017-09-07 21:11:05 -07:00
James Bottomley 2441500a41 Merge branch 'fixes' into misc 2017-09-07 12:12:43 -07:00
Quinn Tran 3515832cc6 scsi: qla2xxx: Reset the logo flag, after target re-login.
After relogin is sucessful, "send_els_logo" flag needs to be
reinitialized. This will allow next re-login to happen successfully.

In target mode, this flag was not reset correctly, causing IO's failure
during reset recovery and port ON/OFF test cases from initiator.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30 22:15:29 -04:00
Quinn Tran b5d1531260 scsi: qla2xxx: Fix slow mem alloc behind lock
Call Trace:
 [<ffffffff81341687>] dump_stack+0x6b/0xa4
 [<ffffffff810c3e30>] ? print_irqtrace_events+0xd0/0xe0
 [<ffffffff8109e3c3>] ___might_sleep+0x183/0x240
 [<ffffffff8109e4d2>] __might_sleep+0x52/0x90
 [<ffffffff811fe17b>] kmem_cache_alloc_trace+0x5b/0x300
 [<ffffffff810c666b>] ? __lock_acquired+0x30b/0x420
 [<ffffffffa0733c28>] qla2x00_alloc_fcport+0x38/0x2a0 [qla2xxx]
 [<ffffffffa07217f4>] ? qla2x00_do_work+0x34/0x2b0 [qla2xxx]
 [<ffffffff816cc82b>] ? _raw_spin_lock_irqsave+0x7b/0x90
 [<ffffffffa072169a>] ? qla24xx_create_new_sess+0x3a/0x160 [qla2xxx]
 [<ffffffffa0721723>] qla24xx_create_new_sess+0xc3/0x160 [qla2xxx]
 [<ffffffff810c91ed>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffffa07218f8>] qla2x00_do_work+0x138/0x2b0 [qla2xxx]

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30 22:15:00 -04:00
Darren Trap 1a28faa010 scsi: qla2xxx: Clear fc4f_nvme flag
Signed-off-by: Darren Trap <darren.trap@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30 22:14:15 -04:00
Johannes Thumshirn d32041ec95 scsi: qla2xxx: add missing includes for qla_isr
Since commit 7401bc18d1 ("scsi: qla2xxx: Add FC-NVMe command
handling") we make use of 'struct nvmefc_fcp_req' in
qla24xx_nvme_iocb_entry() without including linux/nvme-fc-driver.h where
it is defined.

Add linux/nvme-fc-driver.h (and scsi/fc/fc_fs.h as nvme-fc-driver.h
needs the definition of 'struct fc_ba_rjt' from scsi/fc/fc_fs.h) to the
header files included by qla_isr.c.

Fixes: 7401bc18d1 ("scsi: qla2xxx: Add FC-NVMe command handling")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30 22:09:12 -04:00
Dan Carpenter e6f77540c0 scsi: qla2xxx: Fix an integer overflow in sysfs code
The value of "size" comes from the user.  When we add "start + size" it
could lead to an integer overflow bug.

It means we vmalloc() a lot more memory than we had intended.  I believe
that on 64 bit systems vmalloc() can succeed even if we ask it to
allocate huge 4GB buffers.  So we would get memory corruption and likely
a crash when we call ha->isp_ops->write_optrom() and ->read_optrom().

Only root can trigger this bug.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061

Cc: <stable@vger.kernel.org>
Fixes: b7cc176c9e ("[SCSI] qla2xxx: Allow region-based flash-part accesses.")
Reported-by: shqking <shqking@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-30 22:06:20 -04:00
himanshu.madhani@cavium.com 38c980454a scsi: qla2xxx: Update driver version to 10.00.00.01-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:34 -04:00
Sawan Chandak d61cca60aa scsi: qla2xxx: Do not call abort handler function during chip reset
If there are IO's running and host reset or chip reset is triggered,
IO's can fail due to rport time out. During chip reset recovery process,
driver notifies the transport layer that remote port no longer exist, by
calling fc_remote_port_delete(). When this function is called, it
actually delays deletion by "blocking" it. It sets the remote port state
to "FC_PORTSTATE_BLOCKED" and sets FC_RPORT_DEVLOSS_PENDING.  When
driver tries to abort the command by calling its abort handler function,
abort handler will wait until remote port state is blocked state or wait
for dev_loss_tmo time. Due to this blocking, rport times out and results
in an IO failure. This patch adds a check for any active reset process
before calling abort handler function.

[mkp: typo]

Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:33 -04:00
Giridhar Malavali ce0779c7d7 scsi: qla2xxx: Ability to process multiple SGEs in Command SGL for CT passthrough commands.
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:32 -04:00
Joe Carnuccio 998722d183 scsi: qla2xxx: Skip zero queue count entry during FW dump capture
If queue count is zero while reading FW dump template, for entry
T263/T274, skip capturing those entries during FW dump capture.

Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:32 -04:00
Quinn Tran a07fc0a42e scsi: qla2xxx: Recheck session state after RSCN
When RSCN is delivered for specific remote port. Use ADISC to verify the
session is still valid or not.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:31 -04:00
Michael Hernandez d213a4b7a5 scsi: qla2xxx: Increase ql2xmaxqdepth to 64
ql2xmaxqdepth is the module parameter that seeds the per target
queue depth in the Scsi midlayer (sdev->queue_depth). Performance
testing revealed that increasing this value would improve IOPS
numbers under certain workloads.

Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:31 -04:00
himanshu.madhani@cavium.com 043dc1d7e8 scsi: qla2xxx: Enable Async TMF processing
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:30 -04:00
Quinn Tran bdbe24de28 scsi: qla2xxx: Cleanup NPIV host in target mode during config teardown
When we tear down the NPIV host configuration in target mode, the
qla_tgt struct was left dangling on the global list. This patch cleans
up link list and frees memory.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:30 -04:00
Joe Carnuccio 1f4c7c380b scsi: qla2xxx: Add LR distance support from nvram bit
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:29 -04:00
Sawan Chandak 92d4408e34 scsi: qla2xxx: Add support for minimum link speed
Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:29 -04:00
Joe Carnuccio 343f7def32 scsi: qla2xxx: Remove potential macro parameter side-effect in ql_dump_regs()
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:28 -04:00
Joe Carnuccio 050dc76afb scsi: qla2xxx: Print correct mailbox registers in failed summary
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:28 -04:00
Quinn Tran 72fcd4eb3c scsi: qla2xxx: Fix task mgmt handling for NPIV
Fix task management response for NPIV Target mode.
Current code uses the wrong vp index.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:27 -04:00
Joe Carnuccio a14c771125 scsi: qla2xxx: Allow SNS fabric login to be retried
If SNS fabric login fails, set loop resync flag to retry via dpc.

Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:27 -04:00
Joe Carnuccio b85e0957b8 scsi: qla2xxx: Add timeout ability to wait_for_sess_deletion().
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:26 -04:00
Joe Carnuccio fed0f68aa1 scsi: qla2xxx: Move logging default mask to execute once only.
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:25 -04:00
Joe Carnuccio f3caa9905d scsi: qla2xxx: Use sp->free instead of hard coded call.
Calling sp->free() ensures the context-correct free routine is called.

Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:25 -04:00
Joe Carnuccio e0824e69bd scsi: qla2xxx: Prevent sp->free null/uninitialized pointer dereference.
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:24 -04:00
Quinn Tran e4e3a2ce95 scsi: qla2xxx: Add ability to autodetect SFP type
SFP can come in 2 formats: short range/SR and long range/LR.  For LR,
user the can increase the number of Buffer to Buffer credits between end
points via Cavium's command line tool.  By default, FW uses a lower BB
Credit value optimized for SR.  This patch will read the SFP for each
link up event and during chip reset sequence. If the SFP type and
setting are mismatch, then the chip is reset 1 time to use the
appropriate setting.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-24 22:29:24 -04:00